Problem with Construction timelapse #212
Replies: 6 comments 1 reply
-
Actually, having just paid more attention to it, at the time it's due to start, it powers up and starts a countdown, then powers off immediately before the countdown completes. it then switches on again briefly and then stays off for the rest of the set duration. |
Beta Was this translation helpful? Give feedback.
-
Last one, I also have a GoPro Max and have done the exact same thing with it and it works perfectly, except it's no good because you only seem to get a 360 image which isn't what I'm looking for. Any help appreciated. |
Beta Was this translation helpful? Give feedback.
-
There is a bug in the last HERO11 Labs firmware that will be addressed in the next release. In the meantime the previous firmware supports this command https://github.com/gopro/labs/blob/master/docs/firmware/bin/LABS_HERO11_01_20_70.zip MAX can also do this, you just need to select the single lens mode if you don't want 360 images. |
Beta Was this translation helpful? Give feedback.
-
Thank you so much, it has worked! |
Beta Was this translation helpful? Give feedback.
-
Just noting that this problem seems to also be introduced on the MAX 360 on its latest labs firmware, |
Beta Was this translation helpful? Give feedback.
-
Hello, I'm having this problem on a Hero 10 as well, using firmware 1.47, is there any other means to fix this on my camera? Right before the countdown ends, the camera shuts off and never back on again. |
Beta Was this translation helpful? Give feedback.
-
Hi, I bought a GoPro 11 to use as a time lapse for our new house extension. I'm new to all this, so please bear with me. I've downloaded the QR firmware which allows the GoPro to scan the QR codes on here. I've then used the construction time lapse ready made QR code on here (after using the QR code to set the time). The QR code scans and I get a message stating the time the images will start and the camera powers off. If I leave the camera, at the correct time, it seems to power up and appears to take an image, it then powers down again and repeatedly does this for the set duration.
However, at the end of the duration, if I look on the media section (swipe up on the screen) there are no images/videos. If I take the SD card out and look at it, there are no files at all on the memory card.
Construction starts on Monday, any help would be appreciated, I've been struggling with this for 2 weeks now!
Thanks in advance.
Iain
Beta Was this translation helpful? Give feedback.
All reactions