Clean HDMI after Restart via QR code #131
Replies: 3 comments 1 reply
-
All !Mxxxx actions are saved. Capture any clip, and load into https://gopro.github.io/labs/control/metadata/ which will display all the metadata stored. Labs metadata is in the "User Metadata" This action is saved whether on not the HDMI or even MediaMod is connected. Look for a typo, as it worked in my HERO11 HDMI testing. |
Beta Was this translation helpful? Give feedback.
-
You are way over thinking this, just press record, it creates a clip, correct? Use computer, load the clip from the sd card into the web site I listed and press this button |
Beta Was this translation helpful? Give feedback.
-
I redid the code via the cell phone app and it works great after power up. I also told it to default to video. Thank you for all of your help! |
Beta Was this translation helpful? Give feedback.
-
So I changed the firmware to the GoPro Labs firmware for the GoPro 11, I found online (as well as created my own QR code) for the !MHDMI=1 - clean HDMI QR code
I have put this QR Code in…..it gave me the red check mark but I do not think it accepted it. I still had to manually use the mode/select method to clear the icons on the screen.
NOTE, when I did use it, the Gpro 11 Black was not hooked to HDMI at the time… do I need to have on HDMI for the QR code to work? Also, will it save this clean HDMI setting even after power down and power up? This is for a radio station to stream video of our DJs 24/7 and we just want the Clean HDMI to be there even after power up. Basically trying to create an idiot/no human around to fix proof this GoPro.
Thank you all!
Beta Was this translation helpful? Give feedback.
All reactions