Skip to content

Latest commit

 

History

History
302 lines (203 loc) · 17.4 KB

README.md

File metadata and controls

302 lines (203 loc) · 17.4 KB
Raw

ejb-security-jaas: Using the legacy JAAS security domains to secure JEE applications

Author: Stefan Guilhen
Level: Intermediate
Technologies: EJB, Security
Summary: The ejb-security-jaas quickstart demonstrates how legacy JAAS security domains can be used in conjunction with Elytron to secure JEE applications.
Target Product: JBoss EAP
Source: https://github.com/jboss-developer/jboss-eap-quickstarts/

What is it?

The ejb-security-jaas quickstart demonstrates how legacy JAAS-based security domains can be used in conjunction with WildFly Elytron to secure JEE applications. The secured EJB component can be accessed indirectly using a web application and it can also be directly invoked by a remote client. This quickstart shows how Red Hat JBoss Enterprise Application Platform must be configured to support both scenarios using the legacy JAAS integration.

The overall steps required to use the JAAS integration are as follows:

  1. Specify a JAAS security domain in the legacy security subsystem.
  2. Export an Elytron-compatible security realm that delegates to the legacy JAAS security domain.
  3. Create a security-domain in the elytron subsystem that uses the exported realm.
  4. Setup an http-authentication-factory in the elytron subsystem to handle the web requests.
  5. Setup a sasl-authentication-factory in the elytron subsystem to handle the requests made by remote clients.
  6. Add the application-security-domain mappings to both ejb3 and undertow subsystems to enable Elytron security for the EJB3 and web components.

System Requirements

The applications these projects produce are designed to be run on Red Hat JBoss Enterprise Application Platform 7.1 or later.

All you need to build these projects is Java 8.0 (Java SDK 1.8) or later and Maven 3.3.1 or later. See Configure Maven for JBoss EAP 7.1 to make sure you are configured correctly for testing the quickstarts.

To run these quickstarts with the provided build scripts, you need the JBoss EAP distribution ZIP. For information on how to install and run JBoss, see the Red Hat JBoss Enterprise Application Platform Documentation Getting Started Guide located on the Customer Portal.

You can also use JBoss Developer Studio or Eclipse to run the quickstarts.

Use of EAP7_HOME

In the following instructions, replace EAP7_HOME with the actual path to your JBoss EAP installation. The installation path is described in detail here: Use of EAP7_HOME and JBOSS_HOME Variables.

Create the Properties Files for the JAAS Security Domain

  1. Open a command line and navigate to the JBoss EAP server configuration directory:

     For Linux:   EAP7_HOME/standalone/configuration
 For Windows: EAP7_HOME\standalone\configuration

  2. Create a file named users.properties and add the following username/password pair:

     quickstartUser=quickstartPwd1!

  3. Create a file named roles.properties and add the following username/roles pair:

     quickstartUser=guest

    This concludes the configuration required by the legacy JAAS login module used in this quickstart.

Configure the Server

These steps assume you are running the server in standalone mode and using the default standalone.xml supplied with the distribution.

You configure the security domain by running JBoss CLI commands. For your convenience, this quickstart batches the commands into a configure-elytron-jaas.cli script provided in the root directory of this quickstart.

  1. Before you begin, back up your server configuration file

    • If it is running, stop the JBoss EAP server.
    • Back up the file: EAP7_HOME/standalone/configuration/standalone.xml
    • After you have completed testing this quickstart, you can replace this file to restore the server to its original configuration.

  2. Start the JBoss EAP server by typing the following:

     For Linux:  EAP7_HOME/bin/standalone.sh
 For Windows:  EAP7_HOME\bin\standalone.bat

  3. Review the configure-elytron-jaas.cli file in the root of this quickstart directory. This script adds the configuration that enables Elytron security for the quickstart components. Comments in the script describe the purpose of each block of commands.

  4. Open a new command prompt, navigate to the root directory of this quickstart, and run the following command, replacing EAP7_HOME with the path to your server:

     For Linux: EAP7_HOME/bin/jboss-cli.sh --connect --file=configure-elytron-jaas.cli
 For Windows: EAP7_HOME\bin\jboss-cli.bat --connect --file=configure-elytron-jaas.cli

    You should see the following result when you run the script:

     The batch executed successfully
 process-state: reload-required

  5. Stop the JBoss EAP server.

Review the Modified Server Configuration

After stopping the server, open the EAP7_HOME/standalone/configuration/standalone.xml file and review the changes.

  1. The following security-domain was added to the legacy security subsystem:

     <security-domain name="quickstart-domain" cache-type="default">
     <authentication>
         <login-module code="Remoting" flag="optional">
             <module-option name="password-stacking" value="useFirstPass"/>
         </login-module>
         <login-module code="UsersRoles" flag="required">
             <module-option name="usersProperties" value="${jboss.server.config.dir}/users.properties"/>
             <module-option name="rolesProperties" value="${jboss.server.config.dir}/roles.properties"/>
             <module-option name="password-stacking" value="useFirstPass"/>
         </login-module>
     </authentication>
     <mapping>
         <mapping-module code="SimpleRoles" type="role">
             <module-option name="quickstartUser" value="admin"/>
         </mapping-module>
     </mapping>
 </security-domain>

    The quickstart-domainis used to authenticate and authorize users. The Remoting login module is added to properly authenticate requests made from remote clients. A mapping-module is added that can be used to provide an extra role (admin). It is used later on to show how the legacy role mappers can be enabled and disabled.

  2. The following elytron-realm was added to the legacy security subsystem:

     <elytron-integration>
     <security-realms>
         <elytron-realm name="LegacyRealm" legacy-jaas-config="quickstart-domain" apply-role-mappers="false"/>
     </security-realms>
 </elytron-integration>

    This block tells the security subsystem to export an Elytron-compatible realm called LegacyRealm that will delegate authentication and authorization decisions to the legacy quickstart-domain. Setting the apply-role-mappers attribute to false indicates to the exported realm that it should not use any role mappers defined in the legacy security domain.

  3. The following security-domain was added to the elytron subsystem:

     <security-domain name="LegacyDomain" default-realm="LegacyRealm" permission-mapper="default-permission-mapper" security-event-listener="local-audit">
     <realm name="LegacyRealm"/>
 </security-domain>

  4. The following http-authentication-factory was added to the elytron subsystem:

     <http-authentication-factory name="quickstart-http-authentication" http-server-mechanism-factory="global" security-domain="LegacyDomain">
     <mechanism-configuration>
         <mechanism mechanism-name="BASIC">
             <mechanism-realm realm-name="Legacy Realm"/>
         </mechanism>
     </mechanism-configuration>
 </http-authentication-factory>

    It creates the HTTP authentication factory that will handle BASIC requests by delegating the security domain created in step 3.

  5. The following application-security-domain mapping was added to the undertow subsystem:

     <application-security-domains>
     <application-security-domain name="legacy-domain" http-authentication-factory="quickstart-http-authentication"/>
 </application-security-domains>

    It tells Undertow to use the HTTP authentication factory created in step 4 for web applications that specify the security domain legacy-domain in their metadata. The quickstart application specifies this domain both for the web layer, in the jboss-web.xml file, and the EJB component, using annotation in the code.

  6. The following sasl-authentication-factory was added to the elytron subsystem:

     <sasl-authentication-factory name="quickstart-sasl-authentication" sasl-server-factory="configured" security-domain="LegacyDomain">
     <mechanism-configuration>
         <mechanism mechanism-name="PLAIN"/>
     </mechanism-configuration>
 </sasl-authentication-factory>

  7. The http-remoting-connector in the remoting subsystem was updated to use the sasl-authentication-factory created in step 6:

     <http-connector name="http-remoting-connector" connector-ref="default" security-realm="ApplicationRealm" sasl-authentication-factory="quickstart-sasl-authentication"/>

    Authentication performed by the quickstart remote client is handled by this SASL authentication factory.

  8. Finally, the following application-security-domain mapping was added to the ejb3 subsystem:

     <application-security-domains>
     <application-security-domain name="legacy-domain" security-domain="LegacyDomain"/>
 </application-security-domains>

    This mapping basically enables Elytron security for EJB3 applications that specify the security domain legacy-domain in their metadata (either via jboss-ejb3.xml or annotations). The quickstart application uses the @SecurityDomain annotation in the bean class to specify this security domain.

Start the Server

  1. Open a command prompt and navigate to the root of the JBoss EAP directory.

  2. The following shows the command line to start the server:

     For Linux:   EAP7_HOME/bin/standalone.sh
 For Windows: EAP7_HOME\bin\standalone.bat

Build and Deploy the Quickstart

  1. Make sure you have started the JBoss EAP server as described above.

  2. Open a command prompt and navigate to the root directory of this quickstart.

  3. Type this command to build and deploy the archive:

     mvn clean install wildfly:deploy

  4. This will deploy target/ejb-security-jaas.war to the running instance of the server.

Access the Application

The application will be running at the following URL http://localhost:8080/ejb-security-jaas/.

When you access the application, you are presented with a browser login challenge.

  1. If you attempt to login with a user name and password combination that has not been added to the server, the login challenge will be redisplayed.

  2. When you login successfully using quickstartUser/quickstartPwd1!, the browser displays the following security info:

     Successfully called Secured EJB

 Principal : quickstartUser
 Remote User : quickstartUser
 Has admin permission : false
 Authentication Type : BASIC

  3. The application can also be accessed directly by a remote client. Type the following command in the root directory of the quickstart:

     mvn exec:exec

    The remote client application runs and displays the results of calling the secured bean:

         * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


     Called secured bean, caller principal quickstartUser

     Principal has admin permission: false


     * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

  4. Next, change the exported realm so that it now uses the legacy role mappers as defined in the legacy JAAS security domain.

    Make sure you are still in the root directory of this quickstart, and run the following command, replacing EAP7_HOME with the path to your server:

     For Linux: EAP7_HOME/bin/jboss-cli.sh --connect --file=enable-role-mappers.cli
 For Windows: EAP7_HOME\bin\jboss-cli.bat --connect --file=enable-role-mappers.cli

    You should see the following result when you run the script:

     {
     "outcome" => "success",
     "response-headers" => {
         "operation-requires-reload" => true,
         "process-state" => "reload-required"
     }
 }

  5. If you didn't close your web browser, re-load the quickstart application page. Otherwise open a new browser, point it to the URL http://localhost:8080/ejb-security-jaas/ and login with quickstartUser/quickstartPwd1!. It should now display a page confirming the user now has the admin role that was provided by the legacy role mapper:

     Successfully called Secured EJB

 Principal : quickstartUser
 Remote User : quickstartUser
 Has admin permission : true
 Authentication Type : BASIC

  6. The same result can be observed when re-running the remote client application:

         * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


     Called secured bean, caller principal quickstartUser

     Principal has admin permission: true


     * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Undeploy the Archive

  1. Make sure you have started the JBoss EAP server as described above.

  2. Open a command prompt and navigate to the root directory of this quickstart.

  3. When you are finished testing, type this command to undeploy the archive:

     mvn wildfly:undeploy

Restore the Server Configuration

You can restore the original server configuration by running the restore-configuration.cli script provided in the root directory of this quickstart or by manually restoring the backup copy the configuration file.

Restore the Server Configuration by Running the JBoss CLI Script

  1. Start the JBoss EAP server by typing the following:

     For Linux:  EAP7_HOME/bin/standalone.sh
 For Windows:  EAP7_HOME\bin\standalone.bat

  2. Open a new command prompt, navigate to the root directory of this quickstart, and run the following command, replacing EAP7_HOME with the path to your server:

     For Linux: EAP7_HOME/bin/jboss-cli.sh --connect --file=restore-configuration.cli
 For Windows: EAP7_HOME\bin\jboss-cli.bat --connect --file=restore-configuration.cli

    This script reverts the changes made to the ejb3, elytron, security and undertow subsystems. You should see the following result when you run the script:

     The batch executed successfully
 process-state: reload-required

Restore the Server Configuration Manually

  1. If it is running, stop the JBoss EAP server.
  2. Replace the EAP7_HOME/standalone/configuration/standalone.xml file with the backup copy of the file.

Remove the Properties Files from the Server

After you are done with this quickstart, remember to remove the users.properties and roles.properties files from the server configuration directory (EAP7_HOME/standalone/configuration/).

Run the Quickstart in Red Hat JBoss Developer Studio or Eclipse

You can also start the server and deploy the quickstarts or run the Arquillian tests from Eclipse using JBoss tools. For general information about how to import a quickstart, add a JBoss EAP server, and build and deploy a quickstart, see Use JBoss Developer Studio or Eclipse to Run the Quickstarts.

  • Be sure to Create the Properties Files for the JAAS Security Domain as described above.
  • Be sure to configure the server by running the JBoss CLI script as described above under Configure the Server. Stop the server at the end of that step.
  • To deploy the application to the JBoss EAP server, right-click on the ejb-security-jaas project and choose Run As --> Run on Server.
  • You are presented with a browser login challenge. Enter the credentials as described above under Access the Application to see the running application. Note that Has admin permission is false.
  • Leave the application running in JBoss Developer Studio. To configure the server to use the legacy role mappers, open a terminal, and run the enable-role-mappers.cli script as described above under Access the Application.
  • Go back to JBoss Developer Studio and click Refresh the current page. Note that Has admin permission is now true.
  • To undeploy the project, right-click on the ejb-security-jaas project and choose Run As --> Maven build. Enter wildfly:undeploy for the Goals and click Run.
  • Be sure to Restore the Server Configuration when you have completed testing this quickstart.

Debug the Application

If you want to debug the source code of any library in the project, run the following command to pull the source into your local repository. The IDE should then detect it.

mvn dependency:sources