Remote Reader: My phone disconnects after an nfc scan

[KortizKUS]

My phone disconnects after i scan a NTAG215 tag scan there is an update or something i can download to fix this ?

[frankmorgner]

If you want to get things fixed, you need to your problem in a more detailed way so that one can understand what is wrong

[Sx4DoW]

Same issure here. the phone NFC reader reads the tag and then immediatly disconnects from vpcd- Any fixes?

[frankmorgner]

what app? which version? screenshots?

[Sx4DoW]

what app? which version? screenshots?

Remote Smart Card Reader. Version is 2.4.

P.S. You're the goat for answering so quickly

P.S. 2:

If you need this is the pcscd log

[frankmorgner]

could you check with pcsc_scan whether the tag actually gets disconnected?

[frankmorgner]

For some reaser the app gets notified that a new tag was connected. The app disconnects from vpcd (hence the log message) to indicate that the old tag was removed and then connects again to vpcd with the new tag (without log message). So the card in vpcd should work as expected, even though the log message in remote-reader app is not accurate.

[Sx4DoW]

could you check with pcsc_scan whether the tag actually gets disconnected?
I first connected the remote smart card reader to the pcsc then run the pscs_scan and then scanned the card and this is the result:

Mobile app's log:

[frankmorgner]

So your tag is still connected to reader 0, correct? Then I assume connecting to it on the PC should work as expected.

[Sx4DoW]

So your tag is still connected to reader 0, correct? Then I assume connecting to it on the PC should work as expected.

Yes but when connected it reads the test card instead of the normal one

[frankmorgner]

thanks for the info, I need to look into this.

in the mean time, you could try to downgrade to 2.3 to check if it has the same problem.

[Sx4DoW]

thanks for the info, I need to look into this.

in the mean time, you could try to downgrade to 2.3 to check if it has the same problem.

Oke, i'll try later

[ahiyantra]

I tried to link my android smartphone to my windows laptop as an NFC card reader using vpcd/vicc & the virtual smart card reader android app. The dummy ping goes through but nothing else seems to go through. I was unable to make the two sides communicate properly despite them seemingly working fine otherwise. Maybe these issues are connected.