Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Help to get the sensors working for a Gigabyte X670E Aorus Master (AM 5 Board with Ryzen 9) #15

Open
f45tb00t opened this issue Nov 20, 2023 · 45 comments
Assignees
Labels
enhancement New feature or request

Comments

@f45tb00t
Copy link

Hello Frank,

over the last weeks since I have a new PC built I did quite a lot of research how to get the temperature sensors to work. Just with the stock lm-sensors, nothing is really working.

I also tried to get to know how I could build a driver, but actually I am a little lost what I need to do.

Maybe you can help, as I would like to provide also to others a working solution. As we are kinda blind when it's about CPU temperatures with this new boards.

Some Questions:

  1. How can I determine which precise chips are shipped with the board?
    With sensors-detect I found this:
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8689
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8883
    (logical device 4 has address 0x290, could be sensors)
  1. Where can I find the the correct drivers for these chips?

  2. How do I build the drivers and make them available as you did?

Thanks a lot for the good work! :)

regards

FB

@graysky2
Copy link

You need to build the it87 module using the code in this repo. See: https://aur.archlinux.org/packages/it87-dkms-git

@frankcrawford frankcrawford self-assigned this Jan 3, 2024
@frankcrawford
Copy link
Owner

@f45tb00t sorry about my slow response, I've been tied up with other things.

Firstly, sensor-detect only correctly handles sensors in the standard kernel module, not the additional ones in this module.

As for how to build it. For a simple test you can download this repo and just run "make" and then "sudo make install", which will overwrite the existing kernel module. After that, you may need to reboot for the new module to take effect.

However, for ongoing installation, as you upgrade your kernel, you probably want to use the dkms package, and hence you can follow the instructions above. You do need the dkms package installed, and that depends on your specific OS.
Alternatively, if you have dkms installed, you can also just run the script dkms-install.sh found in this repo, but that may not always work.

Anyway, see how this goes and let me know if it works for you

@frankcrawford frankcrawford pinned this issue Jan 3, 2024
@programminghoch10
Copy link

Hey @frankcrawford
i have the exact same board and have been using your kernel module for a while now.
I'd be up to provide required data and testing if you need something.
The mainboard has 8 fans, but the "compatibilty" mode your module uses shows only 5 of them.

This is the current sensors output on linux kernel 6.5.0-5-amd64 (debian):

it8689-isa-0a40
Adapter: ISA adapter
in0:         756.00 mV (min =  +0.00 V, max =  +3.06 V)
in1:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in4:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in5:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in6:           1.99 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.29 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.24 V  
fan1:           0 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +41.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +59.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +57.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = AMD AMDSI
temp4:        +49.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp5:        +48.0°C  (low  =  +0.0°C, high = -125.0°C)  sensor = thermistor
temp6:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

@frankcrawford
Copy link
Owner

@programminghoch10 okay, I can see the issue, I think, the Gigabyte X670E Aorus Master looks to have 2 chips, with the it8689 only providing 5 fans, and the other would provide the other details.

However, we need to see what the other chip is, so are you able to provide additional details on what chips are in the system?

@frankcrawford
Copy link
Owner

frankcrawford commented Feb 9, 2024

@programminghoch10 looking at some other online documentation that board also has an IT8792E (hw ID 0x8733) chip. If you run sensor-detect does it show anything else? Secondly does anything else appear in the boot log for the it87 module?

@programminghoch10
Copy link

@frankcrawford
sensors-detect:

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8689
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8883
    (logical device 4 has address 0x290, could be sensors)

Yes it seems there are two ITE chips connected.

I don't exactly know what you mean with "boot log", I assume this:

$ dmesg | grep it87
[    9.294881] it87: loading out-of-tree module taints kernel.
[    9.294885] it87: module verification failed: signature and/or required key missing - tainting kernel
[    9.295680] it87: it87 driver version v1.0-137-g1663f97.20240207
[    9.295839] it87: Found IT8689E chip at 0xa40, revision 1
[    9.295966] it87: Beeping is supported

@frankcrawford
Copy link
Owner

@programminghoch10 how confident are you with git, and with making and installing modules into the kernel?

I am thinking of trying a few things in a separate git branch but would need you to compile it and test it, as I don't have that board.

@programminghoch10
Copy link

@frankcrawford absolutely no problem. Bring it on! 👍

@frankcrawford
Copy link
Owner

frankcrawford commented Feb 10, 2024

@programminghoch10 when you have a chance can you try the dev branch it87922e in the github repo.

First checkout the test branch ("git checkout it87922e") and then you will need to compile it ("make"), unload the current one ("modprobe -r it87") and load up the local one ("modprobe hwmon_vid ; insmod ./it87.ko").

If I have it correct, it should detect the second chip as an IT87922E (TBC). Then secondly, see if the values look to be correct.

@programminghoch10
Copy link

@frankcrawford
sensors:

it8689-isa-0a40
Adapter: ISA adapter
in0:         744.00 mV (min =  +0.00 V, max =  +3.06 V)
in1:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in4:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in5:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in6:           1.99 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.29 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.24 V  
fan1:         167 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +41.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +61.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +70.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = AMD AMDSI
temp4:        +51.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp5:        +51.0°C  (low  =  +0.0°C, high = -125.0°C)  sensor = thermistor
temp6:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

still shows only one ITE sensor device

dmesg | grep it87:

[    7.407978] it87: loading out-of-tree module taints kernel.
[    7.407982] it87: module verification failed: signature and/or required key missing - tainting kernel
[    7.408683] it87: it87 driver version v1.0-137-g1663f97.20240207
[    7.408850] it87: Found IT8689E chip at 0xa40, revision 1
[    7.408977] it87: Beeping is supported
[ 9285.619736] it87: it87 driver version v1.0-142-g58fda1f.20240210
[ 9285.619957] it87: Found IT8689E chip at 0xa40, revision 1
[ 9285.620097] it87: Beeping is supported
[ 9285.624185] it87: Device (chip IT87922E (TBC) ioreg 0x4e) not activated, skipping

btw thanks for reminding me that kernel modules can be loaded dynamically, I do know me some linux but I totally forgot about that and thought I would have to reboot after dkms installation 👀

@frankcrawford
Copy link
Owner

@programminghoch10 well the output from dmesg shows it did detect the other chip, but didn't activate it.

It may be an issue that the second chip may need to be configured first, which is a known problem. To correct it, you may need to reboot your system, and ensure that the new module is the one loaded, not the older one.

@programminghoch10
Copy link

@frankcrawford
I've made a dkms install and rebooted.
The sensors is the same, still only one device.
dmesg seems to be the same too:

[    5.848180] it87: loading out-of-tree module taints kernel.
[    5.848184] it87: module verification failed: signature and/or required key missing - tainting kernel
[    5.848698] it87: it87 driver version v1.0-142-g58fda1f.20240211
[    5.848902] it87: Found IT8689E chip at 0xa40, revision 1
[    5.849029] it87: Beeping is supported
[    5.853051] it87: Device (chip IT87922E (TBC) ioreg 0x4e) not activated, skipping

@frankcrawford
Copy link
Owner

@programminghoch10 okay, I'll have to see what I can find out about why it isn't activating.

Thanks.

@frankcrawford
Copy link
Owner

@programminghoch10 I've just pushed a new version, although all it does is add some more messaging, so I can see what is going on.

Also, can you send the output from /sys/class/dmi/id/board_name and /sys/class/dmi/id/board_vendor

Thanks.

@programminghoch10
Copy link

@frankcrawford i pulled, maked and inserted directly (no dkms)

[14678.472253] it87: it87 driver version v1.0-143-gc51843b.20240213
[14678.472338] it87: Entering config for second chip
[14678.472521] it87: Found IT8689E chip at 0xa40, revision 1
[14678.472656] it87: Beeping is supported
[14678.477131] it87: Device (chip IT87922E (TBC) ioreg 0x4e) not activated, skipping
$ cat /sys/class/dmi/id/board_{name,vendor}
X670E AORUS MASTER
Gigabyte Technology Co., Ltd.

@frankcrawford
Copy link
Owner

Hmm, the values are coming back right, but not activating properly, so I need to look into further.

@frankcrawford
Copy link
Owner

@programminghoch10 I've done a hack to get past the activation issue. See how it works, but also be aware that this is slighlty dodgy, so be prepared to roll it back.

@programminghoch10
Copy link

@frankcrawford

[ 1895.002060] it87: it87 driver version v1.0-144-gc3fd522.20240213
[ 1895.002092] it87: Entering config for second chip
[ 1895.002269] it87: Found IT8689E chip at 0xa40, revision 1
[ 1895.002397] it87: Beeping is supported
[ 1895.006482] it87: Found IT87922E (TBC) chip at 0x290, revision 1
[ 1895.006568] it87: Beeping is supported

sensors output is still the same, only one device

@f45tb00t
Copy link
Author

f45tb00t commented Feb 14, 2024

Hi guys,

sorry for my late reply... Life... you know...

It's awesome that you work on this. I'll test as well.
Meanwhile I tested also other alternatives. What works for me is another project. CoreFreq.

@programminghoch10 Maybe some things to share with you about the board I found out

  1. Be aware that when you upgrade to 4X RAM, the EXPO profiles won't work anymore. I've contacted the GigaByte Support and they told me that when you use full rambanks, that the profiles do not work anymore, as the specification of the CPU does not allow that. I was not aware about that and my DDR5 6k chips cannot be used at full speed. I've now 128GB RAM with a timing of 3600 instead 6000.
  2. I've unfortunately issues with the 5.1 sound over HDMI (iGPU). Tried also bleeding edge Ubuntu for instance, but only 2.0 Sound works.

Beside that I am really happy with the setup. With the Ryzen 7900 (non x version because of 24/7 usage and the power consumption) the pc is a monster :D Also the 6 SATA ports are reliable so far. Running them with a RAID 6 with 6 disks. For the OS and VMs I use two nvme disks

@frankcrawford
Copy link
Owner

@programminghoch10 Another attempt, based on some comments I've recently been given.

@frankcrawford
Copy link
Owner

@f45tb00t that is an interesting item about 4X RAM causing a problem with EXPO profiles. I think I've seen that previously on other boards.

@f45tb00t
Copy link
Author

f45tb00t commented Feb 14, 2024

@f45tb00t that is an interesting item about 4X RAM causing a problem with EXPO profiles. I think I've seen that previously on other boards.

It seems this is a common problem. Unfortunately.

Max Memory Speed
2x1R    DDR5-5200
2x2R    DDR5-5200
4x1R    DDR5-3600
4x2R    DDR5-3600

Ref: https://www.amd.com/de/product/12746

To be honest I was not aware about that. I think that would have changed my "buying-mind" a little. Because why should I buy then faster RAM for much more money, if they just do not run as expected. I did not try to get the maximum out by manually tweaking, as I need a reliable and stable production system. Furthermore I am not in that tweaking anymore. I don't play games with this pc, so therefore I don't care about 0,00001% more speed. But surely the EXPO was an interesting thing. My last PC was like 10+++ years old, still running, but got very slow over the last years due to the CPU vulns and the applied fixes. So I decided to create a new one without any compromises this time.

Once I get the temperatures of the Cores and fix the 5.1 sound issues, I'll be totally happy with this setup. Hope it lasts also for 10+++ years. :)

@frankcrawford
Copy link
Owner

@programminghoch10 so, talking with someone who has some knowledge of the chips involved, it turns out we have this all wrong. What he said is

0x8883 is IT8883FN which is just a plain eSPI to LPC Bridge, more-less transparent on the bus. Behind it usually lies the above chip.
0x8883 should normally not appear on the LPC bus but it can happen if the bug I described below occurs.

The bug he is describing is that the chip locks up if not accessed correctly, which I thought we did, but may not be done correctly.

Anyway, firstly try the version I pushed recently, but expect more changes, to try and get it working properly.

@programminghoch10
Copy link

@frankcrawford

[  147.963350] it87: it87 driver version v1.0-145-gc635724.20240215
[  147.963387] it87: Entering config for second chip
[  147.963530] it87: Found IT8689E chip at 0xa40, revision 1
[  147.963657] it87: Beeping is supported
[  147.967617] it87: Device (chip IT87922E (TBC) ioreg 0x4e) not activated, skipping

@f45tb00t thanks for sharing your experience with the mainboard
i also got quite the time with it and have a lot to tell,
however im a bit short on time currently, will properly tell you all i found out at a later date
just a quick question though, do you have mainboard of rev 1.0 or rev 1.1?

@f45tb00t
Copy link
Author

@programminghoch10 rev 1.0. As far as I can see there is no 1.1 yet?

@frankcrawford
Copy link
Owner

@programminghoch10 when you do have some time, let me know and I'll get you to try something else more to see the results.

@programminghoch10
Copy link

@f45tb00t there is and i have one after quite some issues with rev 1.0
I'll tell you more at a later date.

@frankcrawford
You can keep working on it, i have the 5 minutes to compile and run it on the evening.
I just meant that i don't currently have the time to write out the extensive story for @f45tb00t .

@frankcrawford
Copy link
Owner

@programminghoch10 I am going to keep working on it, but will do a bit of restructuring, which will affect not just you but other chips as well.

However, what I would like you to try, when you have a chance is to:
a) blacklist the it87 module (depending on system is something like adding "blacklist it87" into /etc/modprobe.d/blacklist)
b) reboot
c) run "sudo sensors-detect" to see what is then listed.
d) then un-blacklist it87

The reason for this is I want to test if it is the it87 module that is crashing the second chip or something else. If it is the it87 module, you should no longer see the chip ID 0x8887, but a different chip ID (I think).

@frankcrawford
Copy link
Owner

Oh, rats, I just checked the sensor-detect module and it may be running the bad code as well. Anyway, we will see.

@frankcrawford
Copy link
Owner

Just changing my request please do the following:

a) blacklist the it87 module (depending on system is something like adding "blacklist it87" into /etc/modprobe.d/blacklist)
b) reboot
c) run "sudo isadump 0x4e 0x4f 7" (hopefully there won't be lots of "ff" entries)
d) run "sudo sensors-detect" to see what is then listed
e) then un-blacklist it87

Thanks.

@frankcrawford
Copy link
Owner

@programminghoch10 After you try the above tests see how the new code I've just pushed works.

@programminghoch10
Copy link

@frankcrawford
isadump:

$ sudo isadump 0x4e 0x4f 7
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0x4e and data register 0x4f.
Probing bank 7 using bank register 0x07.
Continue? [Y/n] 
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 
10: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 
20: 87 33 03 00 00 00 ff 01 3e 18 02 00 8b 00 00 00 
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
60: 00 00 0a 50 00 00 00 00 00 00 00 00 00 00 00 00 
70: 00 01 20 38 00 04 00 00 00 00 00 00 00 00 00 00 
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
c0: 01 00 01 3e 08 00 00 00 00 00 00 14 08 00 1e 60 
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
e0: 00 00 00 00 00 00 00 00 00 20 20 20 c4 3e 3e 0c 
f0: 00 00 00 00 00 00 2c 00 00 00 00 00 ff 00 00 00

sensors-detect:

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8689
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8883
    (logical device 4 has address 0x290, could be sensors)

then i inserted the module (without rebooting), still the same sensors output.
here it is again for reference:

it8689-isa-0a40
Adapter: ISA adapter
in0:           1.45 V  (min =  +0.00 V, max =  +3.06 V)
in1:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in4:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in5:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in6:           1.99 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.29 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.24 V  
fan1:           0 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +28.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +39.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +57.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = AMD AMDSI
temp4:        +33.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp5:        +33.0°C  (low  =  +0.0°C, high = -125.0°C)  sensor = thermistor
temp6:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

@frankcrawford
Copy link
Owner

@programminghoch10 that result is both good and bad. Firstly, the isadump at offset 20 shows the chip ID and is is 8733, which is a valid IT87 chip, not 8883, which is causing us trouble, so it does look like it is getting broken by the initialisation somehow.

So, try the following:
a) blacklist the it87 again
b) reboot
c) run isadump
d) run sensor-detect
e) run isadump (offset 0x20 should be now different)
f) reboot
g) insmod (or modprobe) the it87 module (without doing anything else at all before hand).

Also, make sure to grab the latest git version, I did late last night.

Thanks
Frank

@programminghoch10
Copy link

@f45tb00t
got a bit of time now, here's my story:

I got this mainboard when it was fairly new, around autumn 2022.
It never worked flawlessly, had a bunch of issues, but since the issues changed with BIOS updates I thought it might sort itself out.
My 4x 32GB RAM sticks also wouldn't work on 5200 EXPO, only on 3600 which I back then thought was odd, because they were labelled as at least 4800.

However mid 2023 a weird issue appeared which I couldn't figure out:
The mainboards BIOS was running completely in what I can only describe as "Slow-Motion". The BIOS took about 3 minutes to initialize, and the booting sequence images (like the ati logo and stuff) were visibly taking longer than usual. When booting in this state the whole OS would also be rendered about useless, however resetting sometimes up to 3 times in a row made it possible to boot up normally.
After BIOS updates didn't solve this issue at all and Gigabyte eSupport also wasn't able to help I sent in the mainboard for warranty/repair. Was quite the ordeal to get it out of the case 🙄
Of course they didn't repair it, instead they sent me a rev 1.1.
You can see on their specifications site that these revisions officially only differ in their WiFi chipset, now featuring a Mediatek MT7922A22M instead of Intel AX210 (the mediatek drivers on linux are a bit more flakey than the intel ones i feel, at least for bluetooth, I don't use WiFi)
However they must have changed something else as my "slow motion" issue didn't appear again (yet).

So me now being on the new revision I retested all the stuffs. Here are my results mixed with what I found out on the previous board too.

  • 4 RAM will produce 3600 as before, however the system doesn't crash anymore when I enable the EXPO profile, so I am currently actually running 4 slot EXPO with 5200.
  • Bluetooth and WiFi use the same antenna, I thought I wouldn't need it since I don't use WiFi, but the bluetooth range without antenna is only about 30cm, so I would advise you to install the antenna even if you don't use it regularly.
  • You cannot do legacy boot with iGPU. It just doesn't work. It should, but it doesn't. Maybe a BIOS update will fix this.

Regarding fan control:
At first I was a bit sad I couldn't control the fans with fancontrol as I did on my previous computer (but maybe we are able to change that at some point 👀) however I gotta say the fan settings in the BIOS are quite good and I was able to set it up as I wanted completely in the BIOS. If you want fans to stop voltage-based control mode is the one to go for, as even PWM fans will stop then.
I have the big noctua cooler thing (NH-D15) and I currently have my fans set up to start spinning at about 70°C CPU temp, 75°C for the case fans.
This way while idling at the PC the CPU fans mostly spin at minimum speed or not at all, while everything ramps up with increased load.
If I limit the processor speed to 3GHz, the fans never ramp up, even under full load. 3GHz on 32 threads is still plenty enough for everything.
If you want I can provide you my processor speed control bash function.

I also had some issues installing to NVMe but since I didn't feel like re-installing the whole OS anyways, I've been using my old SATA SSD install for over a year, so I can't say much about that. But I'll definitely switch to NVMe at some point, currently the NVMe SSD is just sitting around and collecting "Power-On Hours" lol.

I also did a quick reboot while writing to document my BIOS settings for you (the ones I changed from default setting):

  • Tweaker > Advanced CPU settings > SVM mode: Enabled
    This enables the use of hardware accelerated virtualization / KVM
  • enabled EXPO profile
  • Settings > IO Ports > Gigabyte Utilites downloader: Disabled
  • Settings > IO Ports > Integrated graphics: Enabled
    nvtop crashes with the iGPU enabled, also I don't need it anyways
  • Boot
    • Fast boot off
    • CSM support off (might be default already)
    • Secure boot off
    • Full screen logo show off
    • Bootup Numlock state on

I also completely turn of my TPM. I don't have an encrypted setup yet, but the fTPM this mainboard has is not well received by the linux developers, thinking about buying an SPI TPM before doing an encrypted install.

I currently have the BIOS version F12, the one my rev 1.1 mainboard came with.

Hope you found it interesting :)

@programminghoch10
Copy link

@frankcrawford
module blacklisted, rebooted,
isadump 0x4e 0x4f 7:

WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0x4e and data register 0x4f.
Probing bank 7 using bank register 0x07.
Continue? [Y/n] 
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 
10: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 
20: 87 33 03 00 00 00 ff 01 3e 18 02 00 8b 00 00 00 
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
60: 00 00 0a 50 00 00 00 00 00 00 00 00 00 00 00 00 
70: 00 01 20 38 00 04 00 00 00 00 00 00 00 00 00 00 
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
c0: 01 00 01 3e 08 00 00 00 00 00 00 14 08 00 1e 60 
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
e0: 00 00 00 00 00 00 00 00 00 20 20 20 c4 3e 3e 0c 
f0: 00 00 00 00 00 00 2c 00 00 00 00 00 ff 00 00 00 

sensors-detect:

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8689
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8883
    (logical device 4 has address 0x290, could be sensors)

I only did the sensors detect until this part showed up, then i left with ctrl-c.

isadump 0x4e 0x4f 7 directly after sensors-detect:

WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0x4e and data register 0x4f.
Probing bank 7 using bank register 0x07.
Continue? [Y/n] 
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 

Definitelfy something fishy there.

I kept the module blacklisted, then inserted the module after booting:

[   63.211781] it87: it87 driver version v1.0-146-g7f93a2a.20240217
[   63.211961] it87: Found IT8689E chip at 0xa40, revision 1
[   63.212089] it87: Beeping is supported
[   63.216100] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3
[   63.216185] it87: Beeping is supported

btw I always pull and build the it87922e branch before testing, dont worry

sensors

it8689-isa-0a40
Adapter: ISA adapter
in0:           1.43 V  (min =  +0.00 V, max =  +3.06 V)
in1:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.00 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in4:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in5:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in6:           1.99 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.26 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.22 V  
fan1:         166 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +42.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +59.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +69.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = AMD AMDSI
temp4:        +51.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp5:        +53.0°C  (low  =  +0.0°C, high = -125.0°C)  sensor = thermistor
temp6:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

it8792-isa-0a60
Adapter: ISA adapter
in0:           1.78 V  (min =  +0.00 V, max =  +2.78 V)
in1:           2.78 V  (min =  +0.00 V, max =  +2.78 V)  ALARM
in2:           1.82 V  (min =  +0.00 V, max =  +2.78 V)
+3.3V:         3.36 V  (min =  +0.00 V, max =  +5.56 V)
in4:           1.78 V  (min =  +0.00 V, max =  +2.78 V)
in5:           1.04 V  (min =  +0.00 V, max =  +2.78 V)
in6:           2.78 V  (min =  +0.00 V, max =  +2.78 V)  ALARM
3VSB:          3.33 V  (min =  +0.00 V, max =  +5.56 V)
Vbat:          3.27 V  
fan1:           0 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
temp1:        +44.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +51.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

Wow two chips are present! Nice!

@programminghoch10
Copy link

also quick and dirty test, I did a full load stress test on the CPU and I can see 4 fans spinning in the case.
sensors (shortended):

it8689-isa-0a40
fan1:        1161 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:        1209 RPM  (min =    0 RPM)

it8792-isa-0a60
fan1:           0 RPM  (min =    0 RPM)
fan2:         894 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)

so were still losing a fan sensor somewhere, but I guess this will need some more extensive testing
If I have more time I can go ahead and replug fans and test how the reported fans map to the board connectors.

@frankcrawford
Copy link
Owner

@programminghoch10 that is great, although missing a fan is a bit annoying. However, it is easier to find one, if it is missing than a whole sensor.

It is likely that it is a different offset for that fans than I currently have, and if you are sure you have values, it should be easy to find it. I'll send some details a bit later.

I am also interested in the temperature and voltages, to make sure we have them correct too, if you can send them over some time.

It may be worth looking at the values in the sensor conf files in "Sensor Configs", as it is probably close to the fan values you would see on your board.

@frankcrawford
Copy link
Owner

@programminghoch10 when you have a chance, we will see if we can find your missing fan. To do this, send through two more dumps:

isadump 0xa45 0xa46
isadump 0xa65 0xa66

Note, this doesn't need a reboot or anything. It should just be looking up the same registers as the driver does.

Thank.

@programminghoch10
Copy link

@frankcrawford

$ isadump 0xa45 0xa46 && isadump 0xa65 0xa66
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0xa45 and data register 0xa46.
Continue? [Y/n] 
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: 19 10 00 80 df ff 00 20 ff 98 48 40 30 ff ff ff 
10: ff ff ff 77 c7 d0 c0 c0 ff ff ff ff ff ff ff ff 
20: 3e a7 a7 a9 5f 5f a6 89 87 29 3b 41 32 32 c9 80 
30: ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 
40: 7f 7f 7f 7f 7f 7f 5f 40 ad 6a d4 00 00 00 00 00 
50: ff 18 7f 7f 7f 40 00 00 90 00 28 12 65 00 00 00 
60: 00 37 64 00 00 03 00 c0 00 00 00 00 00 01 00 ff 
70: 00 00 00 00 00 01 00 2e 00 00 00 00 00 01 00 c0 
80: ff ff ff ff ff ff ff ff 00 00 00 00 00 39 00 4e 
90: 00 00 00 00 ff 10 10 10 42 99 00 00 01 4d f2 41 
a0: 00 3c 64 00 00 03 00 d0 7f 7f 96 80 00 00 0f 98 
b0: 4e 3a 82 76 7f 7f 83 00 7f 7f 80 29 80 80 80 00 
c0: 00 c0 00 10 00 01 10 10 10 10 90 90 90 90 90 90 
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 01 
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00 00 
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0xa65 and data register 0xa66.
Continue? [Y/n] 
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: 19 10 42 00 ff ff 00 00 00 80 48 00 30 ff ff ff 
10: ff ff ff 77 c0 00 00 02 ff ff ff ff ff ff ff ff 
20: a3 ff a6 9a a3 5f ff 99 96 2b c9 33 80 6f 76 76 
30: ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 
40: 7f 7f 7f 7f 7f 7f 5f 40 ad 6a d4 00 ff ff ff ff 
50: ff 38 7f 7f 7f 40 00 00 90 00 09 12 65 00 00 00 
60: 00 14 41 ff 1c 03 00 ff 00 14 41 00 1c 03 00 ff 
70: 00 14 41 ff 1c 03 00 ff ff ff ff 80 ff ff ff ff 
80: ff ff ff ff ff ff ff ff 00 00 00 00 00 ac 00 71 
90: ff 00 00 00 ff 00 00 00 10 97 00 00 40 dd c1 00 
a0: 7f 76 91 dd 34 ff af e8 ee 54 fa db 3f 2f 00 00 
b0: 54 58 58 5a 58 5a 01 01 ff ff ff ff ff ff ff ff 
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 

i don't know what you mean by

I am also interested in the temperature and voltages, to make sure we have them correct too, if you can send them over some time.

How am I supposed to know whether the shown values are correct?
Only thing i can think of is noting down the values shown in the BIOS, but then I also can only tell you which values look similar, not the exact mapping, as there are multiple values in the same range.
Which values do you want exactly?

It may be worth looking at the values in the sensor conf files in "Sensor Configs", as it is probably close to the fan values you would see on your board.

And I also don't know which sensor conf files you mean.

@frankcrawford
Copy link
Owner

@programminghoch10 thanks for those dumps, I'll look at them a bit later.

As for the comments, for the voltage and temp, it is just to see if they look reasonable, by comparing what you see in BIOS, or on Windows with things like hwinfo. It is only to see if they look right, not if t hey are 100% accurate, as I don't know how you can do that either.

Note, especially for the voltages, the mappings are important, as they scale the voltages depending on what type they are. The temperatures don't normally need any scaling.

As for the sensor scalings, in the folder "Sensor configs" as part of the git repo. If you look in any of the con files, they list the chips on that server and the equivalent names of the sensor items. While they don't need to be exactly right, Gigabyte are fairly consistent, so on one board for a certain chip they will tend to match another board too. Note that the names are based on the motherboard, but sensors doesn't care about that, it only cares about the chips listed.

Look for the entries like chip "it8792-" or chip "it8689-", but also chip "it8792-isa-0a60" is fine for your board. Something like GA-Z690-AORUS-PRO.conf is pretty comprehensive, but has some slightly different chips as well.

Feel free to copy one of those files (or generate a whole new one) for your board and load it in /etc/sensors.d, and it will then be used automatically by sensors.

@frankcrawford
Copy link
Owner

@programminghoch10 I've tried a small update to the fan measurements, so, please give it a go.

Also, what connectors do you have the fans connected to? What sort of fans are they?

@programminghoch10
Copy link

@frankcrawford ive tested it, still the same, 4 fans spinning, 3 PWM sensors showing activity.
regarding creating sensor configs, that seems to be a lot of work, ill consider it in 1-2 months when i have more time.

@f45tb00t
update on my mainboard situation:
i forgot to say the mainboard time is always wrong on boot
also my PC just didnt start at all today, and i had to disable my 5200 EXPO to get it working again 🙄

@frankcrawford
Copy link
Owner

@programminghoch10 since this seems to be working correctly and not breaking other chips, I've now rolled this into the mainline.

Going forward I probably won't keep updating the it87922e branch unless something dramatic happens.

@frankcrawford frankcrawford added the enhancement New feature or request label Apr 27, 2024
@dr3st
Copy link

dr3st commented Jun 16, 2024

Hey ho @programminghoch10 @frankcrawford

thank you very much for working on this issue, I really appreciate your work!
I use this board as well and got some issues, maybe you can tell if you can confirm this / got an idea how to fix.

I compiled the kernel by archlinux AUR (dkms is used), rebooted and some fans are found, but not every.
If someone else getting into this issue, i mapped mainboard connector to chip / fan id (sensors output), so you can decide to use the correct (supported) pins atm :)

Chip FAN Board
it8689-isa-0a40 fan5 cpu_opt
it8689-isa-0a40 fan1 cpu_fan
it8689-isa-0a40 fan2 sys_fan1
it8689-isa-0a40 fan3 sys_fan2
it8689-isa-0a40 fan4 sys_fan3
it8792-isa-0a60 fan3 sys_fan4
it8792-isa-0a60 fan1 sys_fan5_pump
it8792-isa-0a60 fan2 sys_fan6_pump
not-found   sys_fan7_pump
not-found   sys_fan8_pump

Please do not get irritated by sensors output, for getting the mapping table I used a lose fan on free ports ...
These are my sensors I get with connected fans:

it8689-isa-0a40
Adapter: ISA adapter
in0:           1.03 V  (min =  +0.00 V, max =  +3.06 V)
in1:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.04 V  (min =  +0.00 V, max =  +3.06 V)
in3:           1.99 V  (min =  +0.00 V, max =  +3.06 V)
in4:           1.04 V  (min =  +0.00 V, max =  +3.06 V)
in5:           1.14 V  (min =  +0.00 V, max =  +3.06 V)
in6:           1.99 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.29 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.14 V  
fan1:         968 RPM  (min =    0 RPM)
fan2:         799 RPM  (min =    0 RPM)
fan3:        1439 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:         950 RPM  (min =    0 RPM)
temp1:        +39.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +40.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = AMD AMDSI
temp4:        +42.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp5:        +34.0°C  (low  =  +0.0°C, high = -125.0°C)  sensor = thermistor
temp6:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  OK

it8792-isa-0a60
Adapter: ISA adapter
in0:           1.78 V  (min =  +0.00 V, max =  +2.81 V)
in1:           2.81 V  (min =  +0.00 V, max =  +2.81 V)  ALARM
in2:           1.83 V  (min =  +0.00 V, max =  +2.81 V)
+3.3V:         3.39 V  (min =  +0.00 V, max =  +5.61 V)
in4:           1.78 V  (min =  +0.00 V, max =  +2.81 V)
in5:           1.04 V  (min =  +0.00 V, max =  +2.81 V)
in6:           2.81 V  (min =  +0.00 V, max =  +2.81 V)  ALARM
3VSB:          3.37 V  (min =  +0.00 V, max =  +5.61 V)
Vbat:          3.26 V  
fan1:           0 RPM  (min =    0 RPM)
fan2:         859 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
temp1:        +41.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +46.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

Is there any chance to give you more information to find out which address to read to get other pins working as well?
The mainboard offers:

  • 1 x CPU
  • 1 x CPU_OPT
  • 4 x SYS_FAN (sys_fan1, sys_fan2, sys_fan3, sys_fan4)
  • 4 x SYS_FAN_PUMP (sys_fan5_pump, sys_fan6_pump, sys_fan7_pump, sys_fan8_pump)

EDIT:
Oh I see it8792 only supports 3 Fans ... After some researches, looks like Gigabyte is using usb device (rgb device) to configure the other fans, there are more issues opened for other software. Some comments lead to the usb theory:
Bus 003 Device 003: ID 048d:5702 Integrated Technology Express, Inc. RGB LED Controller

I fixed this now by switching the ports on mainboard...

@frankcrawford
Copy link
Owner

@dr3st Thanks for the report, and even more interesting the comment that the maybe they are using USB for the other fans. However, I am seeing what I can find with the current chipsets.

The item about RGB LED Controller is more related to the ability to flash lights on the fan, etc, not directly to the management of the fan itself. There is a package that allows you to manage it, https://github.com/liquidctl/liquidctl which seems to work well.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
enhancement New feature or request
Projects
None yet
Development

No branches or pull requests

5 participants