ESS BAT Voltage indication on Maintenace Panel is inconsistent with ELEC DC ESS BAT indication on ECAM SD

[G-DRAW]

Simulator

2020

Aircraft Version

Stable (4k)

Build info

"v0.12.0"

Describe the bug

The Essential Battery indication on the Maintenace Panel is not similar or the same on the ELEC DC page.

Expected behavior

The Batteries indications on the ELEC DC page should be matching the Maintenace Panel indication with ESS BAT selected.

For example: if the Maintenace Panel Battery indication is ranging from: 28.0V, 28.1V all throught to 28.9V, then the ELEC DC BAT indication will read 28V so it's rounded down on the ECAM SD display.

Steps to reproduce

1. Select ELEC DC Page
2. Check ESS BAT Volts
3. Check APU BAT Volts
4. Check BAT 1 Volts
5. Check BAT 2 Volts
6. Compare voltage indications to Maintenace Panel indications.

References (optional)

The other Batteries indications are OK. BAT 1 and BAT 2 are indicating normally.

Additional info (optional)

No response

Discord Username (optional)

No response

[Gurgel100]

The problem is that on the maintenance panel the voltage for BAT ESS and BAT APU are switched. Will be fixed in #9683.