A380X LS scales on PFD's don't auto select to ON when Localiser or Approach Modes are Armed

[G-DRAW]

Aircraft Version

Stable

Build info

"v0.12.0"

Describe the bug

When doing an ILS approach in the A380, and the LS P/B's on EFIS is not turned ON, the LS will constantly flash in amber which is correct, but doesn't automatically display the lateral and vertical deviation scales when LOC or APPR Mode is armed.

Expected behavior

If LS P/B isn't selected when doing an ILS approach, it would automatically display the LOC and G/S deviation scales on both PFD's after arming the LOC P/B or APPR P/B, and the LS P/B's would automatically light up.

Steps to reproduce

1. Setup an ILS approach anywhare you want and conduct approach.
2. leave LS P/B's off.
3. Check that amber LS is flashing when getting nearer to runway.
4. ARM LOC P/B - and check that LS deviation scales automatically appear, and LS P/B lights up on both EFIS.
5. Deselect LOC
6. Also turn off LS P/B's on both EFIS.
7. Check that amber LS is flashing when getting nearer to runway.
8. ARM APPR P/B - and check that LS deviation scales automatically appear, and LS P/B lights up on both EFIS.

References (optional)

No response

Additional info (optional)

No response

Discord Username (optional)

No response