diff --git a/Camera/Camera.vcxproj b/Camera/Camera.vcxproj index 0c5474e..5de5fa2 100644 --- a/Camera/Camera.vcxproj +++ b/Camera/Camera.vcxproj @@ -58,7 +58,7 @@ Disabled - ..\Jpeg;%(AdditionalIncludeDirectories) + ..\Jpeg-9d;%(AdditionalIncludeDirectories) WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) EnableFastChecks MultiThreadedDebugDLL @@ -77,7 +77,7 @@ MaxSpeed true - ..\Jpeg;%(AdditionalIncludeDirectories) + ..\Jpeg-9d;%(AdditionalIncludeDirectories) WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) MultiThreadedDLL true @@ -107,9 +107,8 @@ - - {30d20558-4191-42f9-8833-3313840dcf49} - false + + {019dbd2a-273d-4ba4-bf86-b5efe2ed76b1} diff --git a/Camera/Main.cpp b/Camera/Main.cpp index 9edcbbb..a29bc5c 100644 --- a/Camera/Main.cpp +++ b/Camera/Main.cpp @@ -76,7 +76,7 @@ int main() { // Write YUV file (typically YUV422 interleaved, depends on camera) std::ostringstream filenameC; - filenameC << fnBase << iLoop << ".yuv"; + filenameC << fnBase << iLoop <<"_x.yuv"; ofstream file( filenameC.str().c_str(), ofstream::binary | ofstream::trunc ); file.write( (char*)yuv, yuvsize ); file.close(); @@ -89,7 +89,7 @@ int main() // Write JPEG std::ostringstream filename; - filename << fnBase << iLoop << ".jpg"; + filename << fnBase << iLoop << "_x.jpg"; ofstream file( filename.str().c_str(), ofstream::binary | ofstream::trunc ); file.write( (char*)buffer, size ); file.close(); diff --git a/Common/frProInterface2013JpegDecode.cpp b/Common/frProInterface2013JpegDecode.cpp index d44187b..feddecf 100644 --- a/Common/frProInterface2013JpegDecode.cpp +++ b/Common/frProInterface2013JpegDecode.cpp @@ -47,7 +47,7 @@ extern "C" { /* Read JPEG image from a memory segment (This already exists in jpeglib v8) */ static void init_source (j_decompress_ptr cinfo) {} -static wxjpeg_boolean fill_input_buffer (j_decompress_ptr cinfo) +static /*wxjpeg_*/boolean fill_input_buffer (j_decompress_ptr cinfo) { ERREXIT(cinfo, JERR_INPUT_EMPTY); return TRUE; diff --git a/Jpeg/Jpeg.vcxproj b/Jpeg/Jpeg.vcxproj deleted file mode 100644 index ba4e51b..0000000 --- a/Jpeg/Jpeg.vcxproj +++ /dev/null @@ -1,143 +0,0 @@ - - - - - Debug - Win32 - - - Release - Win32 - - - - {30D20558-4191-42F9-8833-3313840DCF49} - Jpeg - Win32Proj - 10.0.18362.0 - - - - StaticLibrary - v142 - Unicode - true - - - StaticLibrary - v142 - Unicode - - - - - - - - - - - - - <_ProjectFileVersion>15.0.27924.0 - - - $(SolutionDir)$(Configuration)\ - $(Configuration)\ - - - $(SolutionDir)$(Configuration)\ - $(Configuration)\ - - - - Disabled - WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions) - EnableFastChecks - MultiThreadedDebugDLL - - Level3 - EditAndContinue - stdcpp14 - - - - - MaxSpeed - true - WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions) - MultiThreadedDLL - true - - Level3 - ProgramDatabase - stdcpp14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/Jpeg/README b/Jpeg/README deleted file mode 100644 index 86cc206..0000000 --- a/Jpeg/README +++ /dev/null @@ -1,385 +0,0 @@ -The Independent JPEG Group's JPEG software -========================================== - -README for release 6b of 27-Mar-1998 -==================================== - -This distribution contains the sixth public release of the Independent JPEG -Group's free JPEG software. You are welcome to redistribute this software and -to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. - -Serious users of this software (particularly those incorporating it into -larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to -our electronic mailing list. Mailing list members are notified of updates -and have a chance to participate in technical discussions, etc. - -This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, -Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, -Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG -Group. - -IJG is not affiliated with the official ISO JPEG standards committee. - - -DOCUMENTATION ROADMAP -===================== - -This file contains the following sections: - -OVERVIEW General description of JPEG and the IJG software. -LEGAL ISSUES Copyright, lack of warranty, terms of distribution. -REFERENCES Where to learn more about JPEG. -ARCHIVE LOCATIONS Where to find newer versions of this software. -RELATED SOFTWARE Other stuff you should get. -FILE FORMAT WARS Software *not* to get. -TO DO Plans for future IJG releases. - -Other documentation files in the distribution are: - -User documentation: - install.doc How to configure and install the IJG software. - usage.doc Usage instructions for cjpeg, djpeg, jpegtran, - rdjpgcom, and wrjpgcom. - *.1 Unix-style man pages for programs (same info as usage.doc). - wizard.doc Advanced usage instructions for JPEG wizards only. - change.log Version-to-version change highlights. -Programmer and internal documentation: - libjpeg.doc How to use the JPEG library in your own programs. - example.c Sample code for calling the JPEG library. - structure.doc Overview of the JPEG library's internal structure. - filelist.doc Road map of IJG files. - coderules.doc Coding style rules --- please read if you contribute code. - -Please read at least the files install.doc and usage.doc. Useful information -can also be found in the JPEG FAQ (Frequently Asked Questions) article. See -ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. - -If you want to understand how the JPEG code works, we suggest reading one or -more of the REFERENCES, then looking at the documentation files (in roughly -the order listed) before diving into the code. - - -OVERVIEW -======== - -This package contains C software to implement JPEG image compression and -decompression. JPEG (pronounced "jay-peg") is a standardized compression -method for full-color and gray-scale images. JPEG is intended for compressing -"real-world" scenes; line drawings, cartoons and other non-realistic images -are not its strong suit. JPEG is lossy, meaning that the output image is not -exactly identical to the input image. Hence you must not use JPEG if you -have to have identical output bits. However, on typical photographic images, -very good compression levels can be obtained with no visible change, and -remarkably high compression levels are possible if you can tolerate a -low-quality image. For more details, see the references, or just experiment -with various compression settings. - -This software implements JPEG baseline, extended-sequential, and progressive -compression processes. Provision is made for supporting all variants of these -processes, although some uncommon parameter settings aren't implemented yet. -For legal reasons, we are not distributing code for the arithmetic-coding -variants of JPEG; see LEGAL ISSUES. We have made no provision for supporting -the hierarchical or lossless processes defined in the standard. - -We provide a set of library routines for reading and writing JPEG image files, -plus two sample applications "cjpeg" and "djpeg", which use the library to -perform conversion between JPEG and some other popular image file formats. -The library is intended to be reused in other applications. - -In order to support file conversion and viewing software, we have included -considerable functionality beyond the bare JPEG coding/decoding capability; -for example, the color quantization modules are not strictly part of JPEG -decoding, but they are essential for output to colormapped file formats or -colormapped displays. These extra functions can be compiled out of the -library if not required for a particular application. We have also included -"jpegtran", a utility for lossless transcoding between different JPEG -processes, and "rdjpgcom" and "wrjpgcom", two simple applications for -inserting and extracting textual comments in JFIF files. - -The emphasis in designing this software has been on achieving portability and -flexibility, while also making it fast enough to be useful. In particular, -the software is not intended to be read as a tutorial on JPEG. (See the -REFERENCES section for introductory material.) Rather, it is intended to -be reliable, portable, industrial-strength code. We do not claim to have -achieved that goal in every aspect of the software, but we strive for it. - -We welcome the use of this software as a component of commercial products. -No royalty is required, but we do ask for an acknowledgement in product -documentation, as described under LEGAL ISSUES. - - -LEGAL ISSUES -============ - -In plain English: - -1. We don't promise that this software works. (But if you find any bugs, - please let us know!) -2. You can use this software for whatever you want. You don't have to pay us. -3. You may not pretend that you wrote this software. If you use it in a - program, you must acknowledge somewhere in your documentation that - you've used the IJG code. - -In legalese: - -The authors make NO WARRANTY or representation, either express or implied, -with respect to this software, its quality, accuracy, merchantability, or -fitness for a particular purpose. This software is provided "AS IS", and you, -its user, assume the entire risk as to its quality and accuracy. - -This software is copyright (C) 1991-1998, Thomas G. Lane. -All Rights Reserved except as specified below. - -Permission is hereby granted to use, copy, modify, and distribute this -software (or portions thereof) for any purpose, without fee, subject to these -conditions: -(1) If any part of the source code for this software is distributed, then this -README file must be included, with this copyright and no-warranty notice -unaltered; and any additions, deletions, or changes to the original files -must be clearly indicated in accompanying documentation. -(2) If only executable code is distributed, then the accompanying -documentation must state that "this software is based in part on the work of -the Independent JPEG Group". -(3) Permission for use of this software is granted only if the user accepts -full responsibility for any undesirable consequences; the authors accept -NO LIABILITY for damages of any kind. - -These conditions apply to any software derived from or based on the IJG code, -not just to the unmodified library. If you use our work, you ought to -acknowledge us. - -Permission is NOT granted for the use of any IJG author's name or company name -in advertising or publicity relating to this software or products derived from -it. This software may be referred to only as "the Independent JPEG Group's -software". - -We specifically permit and encourage the use of this software as the basis of -commercial products, provided that all warranty or liability claims are -assumed by the product vendor. - - -ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, -sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. -ansi2knr.c is NOT covered by the above copyright and conditions, but instead -by the usual distribution terms of the Free Software Foundation; principally, -that you must include source code if you redistribute it. (See the file -ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part -of any program generated from the IJG code, this does not limit you more than -the foregoing paragraphs do. - -The Unix configuration script "configure" was produced with GNU Autoconf. -It is copyright by the Free Software Foundation but is freely distributable. -The same holds for its supporting scripts (config.guess, config.sub, -ltconfig, ltmain.sh). Another support script, install-sh, is copyright -by M.I.T. but is also freely distributable. - -It appears that the arithmetic coding option of the JPEG spec is covered by -patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot -legally be used without obtaining one or more licenses. For this reason, -support for arithmetic coding has been removed from the free JPEG software. -(Since arithmetic coding provides only a marginal gain over the unpatented -Huffman mode, it is unlikely that very many implementations will support it.) -So far as we are aware, there are no patent restrictions on the remaining -code. - -The IJG distribution formerly included code to read and write GIF files. -To avoid entanglement with the Unisys LZW patent, GIF reading support has -been removed altogether, and the GIF writer has been simplified to produce -"uncompressed GIFs". This technique does not use the LZW algorithm; the -resulting GIF files are larger than usual, but are readable by all standard -GIF decoders. - -We are required to state that - "The Graphics Interchange Format(c) is the Copyright property of - CompuServe Incorporated. GIF(sm) is a Service Mark property of - CompuServe Incorporated." - - -REFERENCES -========== - -We highly recommend reading one or more of these references before trying to -understand the innards of the JPEG software. - -The best short technical introduction to the JPEG compression algorithm is - Wallace, Gregory K. "The JPEG Still Picture Compression Standard", - Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. -(Adjacent articles in that issue discuss MPEG motion picture compression, -applications of JPEG, and related topics.) If you don't have the CACM issue -handy, a PostScript file containing a revised version of Wallace's article is -available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually -a preprint for an article that appeared in IEEE Trans. Consumer Electronics) -omits the sample images that appeared in CACM, but it includes corrections -and some added material. Note: the Wallace article is copyright ACM and IEEE, -and it may not be used for commercial purposes. - -A somewhat less technical, more leisurely introduction to JPEG can be found in -"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by -M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides -good explanations and example C code for a multitude of compression methods -including JPEG. It is an excellent source if you are comfortable reading C -code but don't know much about data compression in general. The book's JPEG -sample code is far from industrial-strength, but when you are ready to look -at a full implementation, you've got one here... - -The best full description of JPEG is the textbook "JPEG Still Image Data -Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published -by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. -The book includes the complete text of the ISO JPEG standards (DIS 10918-1 -and draft DIS 10918-2). This is by far the most complete exposition of JPEG -in existence, and we highly recommend it. - -The JPEG standard itself is not available electronically; you must order a -paper copy through ISO or ITU. (Unless you feel a need to own a certified -official copy, we recommend buying the Pennebaker and Mitchell book instead; -it's much cheaper and includes a great deal of useful explanatory material.) -In the USA, copies of the standard may be ordered from ANSI Sales at (212) -642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI -doesn't take credit card orders, but Global does.) It's not cheap: as of -1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7% -shipping/handling. The standard is divided into two parts, Part 1 being the -actual specification, while Part 2 covers compliance testing methods. Part 1 -is titled "Digital Compression and Coding of Continuous-tone Still Images, -Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS -10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of -Continuous-tone Still Images, Part 2: Compliance testing" and has document -numbers ISO/IEC IS 10918-2, ITU-T T.83. - -Some extensions to the original JPEG standard are defined in JPEG Part 3, -a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG -currently does not support any Part 3 extensions. - -The JPEG standard does not specify all details of an interchangeable file -format. For the omitted details we follow the "JFIF" conventions, revision -1.02. A copy of the JFIF spec is available from: - Literature Department - C-Cube Microsystems, Inc. - 1778 McCarthy Blvd. - Milpitas, CA 95035 - phone (408) 944-6300, fax (408) 944-6314 -A PostScript version of this document is available by FTP at -ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text -version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing -the figures. - -The TIFF 6.0 file format specification can be obtained by FTP from -ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme -found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. -IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). -Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 -(Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or -from ftp://ftp.uu.net/graphics/jpeg/. It is expected that the next revision -of the TIFF spec will replace the 6.0 JPEG design with the Note's design. -Although IJG's own code does not support TIFF/JPEG, the free libtiff library -uses our library to implement TIFF/JPEG per the Note. libtiff is available -from ftp://ftp.sgi.com/graphics/tiff/. - - -ARCHIVE LOCATIONS -================= - -The "official" archive site for this software is ftp.uu.net (Internet -address 192.48.96.9). The most recent released version can always be found -there in directory graphics/jpeg. This particular version will be archived -as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you don't have -direct Internet access, UUNET's archives are also available via UUCP; contact -help@uunet.uu.net for information on retrieving files that way. - -Numerous Internet sites maintain copies of the UUNET files. However, only -ftp.uu.net is guaranteed to have the latest official version. - -You can also obtain this software in DOS-compatible "zip" archive format from -the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or -on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 -"JPEG Tools". Again, these versions may sometimes lag behind the ftp.uu.net -release. - -The JPEG FAQ (Frequently Asked Questions) article is a useful source of -general information about JPEG. It is updated constantly and therefore is -not included in this distribution. The FAQ is posted every two weeks to -Usenet newsgroups comp.graphics.misc, news.answers, and other groups. -It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ -and other news.answers archive sites, including the official news.answers -archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. -If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu -with body - send usenet/news.answers/jpeg-faq/part1 - send usenet/news.answers/jpeg-faq/part2 - - -RELATED SOFTWARE -================ - -Numerous viewing and image manipulation programs now support JPEG. (Quite a -few of them use this library to do so.) The JPEG FAQ described above lists -some of the more popular free and shareware viewers, and tells where to -obtain them on Internet. - -If you are on a Unix machine, we highly recommend Jef Poskanzer's free -PBMPLUS software, which provides many useful operations on PPM-format image -files. In particular, it can convert PPM images to and from a wide range of -other formats, thus making cjpeg/djpeg considerably more useful. The latest -version is distributed by the NetPBM group, and is available from numerous -sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/. -Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is; -you are likely to have difficulty making it work on any non-Unix machine. - -A different free JPEG implementation, written by the PVRG group at Stanford, -is available from ftp://havefun.stanford.edu/pub/jpeg/. This program -is designed for research and experimentation rather than production use; -it is slower, harder to use, and less portable than the IJG code, but it -is easier to read and modify. Also, the PVRG code supports lossless JPEG, -which we do not. (On the other hand, it doesn't do progressive JPEG.) - - -FILE FORMAT WARS -================ - -Some JPEG programs produce files that are not compatible with our library. -The root of the problem is that the ISO JPEG committee failed to specify a -concrete file format. Some vendors "filled in the blanks" on their own, -creating proprietary formats that no one else could read. (For example, none -of the early commercial JPEG implementations for the Macintosh were able to -exchange compressed files.) - -The file format we have adopted is called JFIF (see REFERENCES). This format -has been agreed to by a number of major commercial JPEG vendors, and it has -become the de facto standard. JFIF is a minimal or "low end" representation. -We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF -Technical Note #2) for "high end" applications that need to record a lot of -additional data about an image. TIFF/JPEG is fairly new and not yet widely -supported, unfortunately. - -The upcoming JPEG Part 3 standard defines a file format called SPIFF. -SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should -be able to read the most common variant of SPIFF. SPIFF has some technical -advantages over JFIF, but its major claim to fame is simply that it is an -official standard rather than an informal one. At this point it is unclear -whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto -standard. IJG intends to support SPIFF once the standard is frozen, but we -have not decided whether it should become our default output format or not. -(In any case, our decoder will remain capable of reading JFIF indefinitely.) - -Various proprietary file formats incorporating JPEG compression also exist. -We have little or no sympathy for the existence of these formats. Indeed, -one of the original reasons for developing this free software was to help -force convergence on common, open format standards for JPEG files. Don't -use a proprietary file format! - - -TO DO -===== - -The major thrust for v7 will probably be improvement of visual quality. -The current method for scaling the quantization tables is known not to be -very good at low Q values. We also intend to investigate block boundary -smoothing, "poor man's variable quantization", and other means of improving -quality-vs-file-size performance without sacrificing compatibility. - -In future versions, we are considering supporting some of the upcoming JPEG -Part 3 extensions --- principally, variable quantization and the SPIFF file -format. - -As always, speeding things up is of great interest. - -Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net. diff --git a/Jpeg/ansi2knr.1 b/Jpeg/ansi2knr.1 deleted file mode 100644 index f9ee5a6..0000000 --- a/Jpeg/ansi2knr.1 +++ /dev/null @@ -1,36 +0,0 @@ -.TH ANSI2KNR 1 "19 Jan 1996" -.SH NAME -ansi2knr \- convert ANSI C to Kernighan & Ritchie C -.SH SYNOPSIS -.I ansi2knr -[--varargs] input_file [output_file] -.SH DESCRIPTION -If no output_file is supplied, output goes to stdout. -.br -There are no error messages. -.sp -.I ansi2knr -recognizes function definitions by seeing a non-keyword identifier at the left -margin, followed by a left parenthesis, with a right parenthesis as the last -character on the line, and with a left brace as the first token on the -following line (ignoring possible intervening comments). It will recognize a -multi-line header provided that no intervening line ends with a left or right -brace or a semicolon. These algorithms ignore whitespace and comments, except -that the function name must be the first thing on the line. -.sp -The following constructs will confuse it: -.br - - Any other construct that starts at the left margin and follows the -above syntax (such as a macro or function call). -.br - - Some macros that tinker with the syntax of the function header. -.sp -The --varargs switch is obsolete, and is recognized only for -backwards compatibility. The present version of -.I ansi2knr -will always attempt to convert a ... argument to va_alist and va_dcl. -.SH AUTHOR -L. Peter Deutsch wrote the original ansi2knr and -continues to maintain the current version; most of the code in the current -version is his work. ansi2knr also includes contributions by Francois -Pinard and Jim Avera . diff --git a/Jpeg/ansi2knr.c b/Jpeg/ansi2knr.c deleted file mode 100644 index 4e05fc2..0000000 --- a/Jpeg/ansi2knr.c +++ /dev/null @@ -1,693 +0,0 @@ -/* ansi2knr.c */ -/* Convert ANSI C function definitions to K&R ("traditional C") syntax */ - -/* -ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY. No author or distributor accepts responsibility to anyone for the -consequences of using it or for whether it serves any particular purpose or -works at all, unless he says so in writing. Refer to the GNU General Public -License (the "GPL") for full details. - -Everyone is granted permission to copy, modify and redistribute ansi2knr, -but only under the conditions described in the GPL. A copy of this license -is supposed to have been given to you along with ansi2knr so you can know -your rights and responsibilities. It should be in a file named COPYLEFT. -[In the IJG distribution, the GPL appears below, not in a separate file.] -Among other things, the copyright notice and this notice must be preserved -on all copies. - -We explicitly state here what we believe is already implied by the GPL: if -the ansi2knr program is distributed as a separate set of sources and a -separate executable file which are aggregated on a storage medium together -with another program, this in itself does not bring the other program under -the GPL, nor does the mere fact that such a program or the procedures for -constructing it invoke the ansi2knr executable bring any other part of the -program under the GPL. -*/ - -/* ----------- Here is the GNU GPL file COPYLEFT, referred to above ---------- ------ These terms do NOT apply to the JPEG software itself; see README ------ - - GHOSTSCRIPT GENERAL PUBLIC LICENSE - (Clarified 11 Feb 1988) - - Copyright (C) 1988 Richard M. Stallman - Everyone is permitted to copy and distribute verbatim copies of this - license, but changing it is not allowed. You can also use this wording - to make the terms for other programs. - - The license agreements of most software companies keep you at the -mercy of those companies. By contrast, our general public license is -intended to give everyone the right to share Ghostscript. To make sure -that you get the rights we want you to have, we need to make -restrictions that forbid anyone to deny you these rights or to ask you -to surrender the rights. Hence this license agreement. - - Specifically, we want to make sure that you have the right to give -away copies of Ghostscript, that you receive source code or else can get -it if you want it, that you can change Ghostscript or use pieces of it -in new free programs, and that you know you can do these things. - - To make sure that everyone has such rights, we have to forbid you to -deprive anyone else of these rights. For example, if you distribute -copies of Ghostscript, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must tell them their rights. - - Also, for our own protection, we must make certain that everyone finds -out that there is no warranty for Ghostscript. If Ghostscript is -modified by someone else and passed on, we want its recipients to know -that what they have is not what we distributed, so that any problems -introduced by others will not reflect on our reputation. - - Therefore we (Richard M. Stallman and the Free Software Foundation, -Inc.) make the following terms which say what you must do to be allowed -to distribute or change Ghostscript. - - - COPYING POLICIES - - 1. You may copy and distribute verbatim copies of Ghostscript source -code as you receive it, in any medium, provided that you conspicuously -and appropriately publish on each copy a valid copyright and license -notice "Copyright (C) 1989 Aladdin Enterprises. All rights reserved. -Distributed by Free Software Foundation, Inc." (or with whatever year is -appropriate); keep intact the notices on all files that refer to this -License Agreement and to the absence of any warranty; and give any other -recipients of the Ghostscript program a copy of this License Agreement -along with the program. You may charge a distribution fee for the -physical act of transferring a copy. - - 2. You may modify your copy or copies of Ghostscript or any portion of -it, and copy and distribute such modifications under the terms of -Paragraph 1 above, provided that you also do the following: - - a) cause the modified files to carry prominent notices stating - that you changed the files and the date of any change; and - - b) cause the whole of any work that you distribute or publish, - that in whole or in part contains or is a derivative of Ghostscript - or any part thereof, to be licensed at no charge to all third - parties on terms identical to those contained in this License - Agreement (except that you may choose to grant more extensive - warranty protection to some or all third parties, at your option). - - c) You may charge a distribution fee for the physical act of - transferring a copy, and you may at your option offer warranty - protection in exchange for a fee. - -Mere aggregation of another unrelated program with this program (or its -derivative) on a volume of a storage or distribution medium does not bring -the other program under the scope of these terms. - - 3. You may copy and distribute Ghostscript (or a portion or derivative -of it, under Paragraph 2) in object code or executable form under the -terms of Paragraphs 1 and 2 above provided that you also do one of the -following: - - a) accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of - Paragraphs 1 and 2 above; or, - - b) accompany it with a written offer, valid for at least three - years, to give any third party free (except for a nominal - shipping charge) a complete machine-readable copy of the - corresponding source code, to be distributed under the terms of - Paragraphs 1 and 2 above; or, - - c) accompany it with the information you received as to where the - corresponding source code may be obtained. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form alone.) - -For an executable file, complete source code means all the source code for -all modules it contains; but, as a special exception, it need not include -source code for modules which are standard libraries that accompany the -operating system on which the executable file runs. - - 4. You may not copy, sublicense, distribute or transfer Ghostscript -except as expressly provided under this License Agreement. Any attempt -otherwise to copy, sublicense, distribute or transfer Ghostscript is -void and your rights to use the program under this License agreement -shall be automatically terminated. However, parties who have received -computer software programs from you with this License Agreement will not -have their licenses terminated so long as such parties remain in full -compliance. - - 5. If you wish to incorporate parts of Ghostscript into other free -programs whose distribution conditions are different, write to the Free -Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not -yet worked out a simple rule that can be stated here, but we will often -permit this. We will be guided by the two goals of preserving the free -status of all derivatives of our free software and of promoting the -sharing and reuse of software. - -Your comments and suggestions about our licensing policies and our -software are welcome! Please contact the Free Software Foundation, -Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296. - - NO WARRANTY - - BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY -NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT -WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD -M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES -PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER -EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE -ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH -YOU. SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL -NECESSARY SERVICING, REPAIR OR CORRECTION. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M. -STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN -ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE -GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING -ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR -CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE -(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED -INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE -PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU -HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM -BY ANY OTHER PARTY. - --------------------- End of file COPYLEFT ------------------------------ -*/ - -/* - * Usage: - ansi2knr input_file [output_file] - * If no output_file is supplied, output goes to stdout. - * There are no error messages. - * - * ansi2knr recognizes function definitions by seeing a non-keyword - * identifier at the left margin, followed by a left parenthesis, - * with a right parenthesis as the last character on the line, - * and with a left brace as the first token on the following line - * (ignoring possible intervening comments). - * It will recognize a multi-line header provided that no intervening - * line ends with a left or right brace or a semicolon. - * These algorithms ignore whitespace and comments, except that - * the function name must be the first thing on the line. - * The following constructs will confuse it: - * - Any other construct that starts at the left margin and - * follows the above syntax (such as a macro or function call). - * - Some macros that tinker with the syntax of the function header. - */ - -/* - * The original and principal author of ansi2knr is L. Peter Deutsch - * . Other authors are noted in the change history - * that follows (in reverse chronological order): - lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with - compilers that don't understand void, as suggested by - Tom Lane - lpd 96-01-15 changed to require that the first non-comment token - on the line following a function header be a left brace, - to reduce sensitivity to macros, as suggested by Tom Lane - - lpd 95-06-22 removed #ifndefs whose sole purpose was to define - undefined preprocessor symbols as 0; changed all #ifdefs - for configuration symbols to #ifs - lpd 95-04-05 changed copyright notice to make it clear that - including ansi2knr in a program does not bring the entire - program under the GPL - lpd 94-12-18 added conditionals for systems where ctype macros - don't handle 8-bit characters properly, suggested by - Francois Pinard ; - removed --varargs switch (this is now the default) - lpd 94-10-10 removed CONFIG_BROKETS conditional - lpd 94-07-16 added some conditionals to help GNU `configure', - suggested by Francois Pinard ; - properly erase prototype args in function parameters, - contributed by Jim Avera ; - correct error in writeblanks (it shouldn't erase EOLs) - lpd 89-xx-xx original version - */ - -/* Most of the conditionals here are to make ansi2knr work with */ -/* or without the GNU configure machinery. */ - -#if HAVE_CONFIG_H -# include -#endif - -#include -#include - -#if HAVE_CONFIG_H - -/* - For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). - This will define HAVE_CONFIG_H and so, activate the following lines. - */ - -# if STDC_HEADERS || HAVE_STRING_H -# include -# else -# include -# endif - -#else /* not HAVE_CONFIG_H */ - -/* Otherwise do it the hard way */ - -# ifdef BSD -# include -# else -# ifdef VMS - extern int strlen(), strncmp(); -# else -# include -# endif -# endif - -#endif /* not HAVE_CONFIG_H */ - -#if STDC_HEADERS -# include -#else -/* - malloc and free should be declared in stdlib.h, - but if you've got a K&R compiler, they probably aren't. - */ -# ifdef MSDOS -# include -# else -# ifdef VMS - extern char *malloc(); - extern void free(); -# else - extern char *malloc(); - extern int free(); -# endif -# endif - -#endif - -/* - * The ctype macros don't always handle 8-bit characters correctly. - * Compensate for this here. - */ -#ifdef isascii -# undef HAVE_ISASCII /* just in case */ -# define HAVE_ISASCII 1 -#else -#endif -#if STDC_HEADERS || !HAVE_ISASCII -# define is_ascii(c) 1 -#else -# define is_ascii(c) isascii(c) -#endif - -#define is_space(c) (is_ascii(c) && isspace(c)) -#define is_alpha(c) (is_ascii(c) && isalpha(c)) -#define is_alnum(c) (is_ascii(c) && isalnum(c)) - -/* Scanning macros */ -#define isidchar(ch) (is_alnum(ch) || (ch) == '_') -#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') - -/* Forward references */ -char *skipspace(); -int writeblanks(); -int test1(); -int convert1(); - -/* The main program */ -int -main(argc, argv) - int argc; - char *argv[]; -{ FILE *in, *out; -#define bufsize 5000 /* arbitrary size */ - char *buf; - char *line; - char *more; - /* - * In previous versions, ansi2knr recognized a --varargs switch. - * If this switch was supplied, ansi2knr would attempt to convert - * a ... argument to va_alist and va_dcl; if this switch was not - * supplied, ansi2knr would simply drop any such arguments. - * Now, ansi2knr always does this conversion, and we only - * check for this switch for backward compatibility. - */ - int convert_varargs = 1; - - if ( argc > 1 && argv[1][0] == '-' ) - { if ( !strcmp(argv[1], "--varargs") ) - { convert_varargs = 1; - argc--; - argv++; - } - else - { fprintf(stderr, "Unrecognized switch: %s\n", argv[1]); - exit(1); - } - } - switch ( argc ) - { - default: - printf("Usage: ansi2knr input_file [output_file]\n"); - exit(0); - case 2: - out = stdout; - break; - case 3: - out = fopen(argv[2], "w"); - if ( out == NULL ) - { fprintf(stderr, "Cannot open output file %s\n", argv[2]); - exit(1); - } - } - in = fopen(argv[1], "r"); - if ( in == NULL ) - { fprintf(stderr, "Cannot open input file %s\n", argv[1]); - exit(1); - } - fprintf(out, "#line 1 \"%s\"\n", argv[1]); - buf = malloc(bufsize); - line = buf; - while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) - { -test: line += strlen(line); - switch ( test1(buf) ) - { - case 2: /* a function header */ - convert1(buf, out, 1, convert_varargs); - break; - case 1: /* a function */ - /* Check for a { at the start of the next line. */ - more = ++line; -f: if ( line >= buf + (bufsize - 1) ) /* overflow check */ - goto wl; - if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL ) - goto wl; - switch ( *skipspace(more, 1) ) - { - case '{': - /* Definitely a function header. */ - convert1(buf, out, 0, convert_varargs); - fputs(more, out); - break; - case 0: - /* The next line was blank or a comment: */ - /* keep scanning for a non-comment. */ - line += strlen(line); - goto f; - default: - /* buf isn't a function header, but */ - /* more might be. */ - fputs(buf, out); - strcpy(buf, more); - line = buf; - goto test; - } - break; - case -1: /* maybe the start of a function */ - if ( line != buf + (bufsize - 1) ) /* overflow check */ - continue; - /* falls through */ - default: /* not a function */ -wl: fputs(buf, out); - break; - } - line = buf; - } - if ( line != buf ) - fputs(buf, out); - free(buf); - fclose(out); - fclose(in); - return 0; -} - -/* Skip over space and comments, in either direction. */ -char * -skipspace(p, dir) - register char *p; - register int dir; /* 1 for forward, -1 for backward */ -{ for ( ; ; ) - { while ( is_space(*p) ) - p += dir; - if ( !(*p == '/' && p[dir] == '*') ) - break; - p += dir; p += dir; - while ( !(*p == '*' && p[dir] == '/') ) - { if ( *p == 0 ) - return p; /* multi-line comment?? */ - p += dir; - } - p += dir; p += dir; - } - return p; -} - -/* - * Write blanks over part of a string. - * Don't overwrite end-of-line characters. - */ -int -writeblanks(start, end) - char *start; - char *end; -{ char *p; - for ( p = start; p < end; p++ ) - if ( *p != '\r' && *p != '\n' ) - *p = ' '; - return 0; -} - -/* - * Test whether the string in buf is a function definition. - * The string may contain and/or end with a newline. - * Return as follows: - * 0 - definitely not a function definition; - * 1 - definitely a function definition; - * 2 - definitely a function prototype (NOT USED); - * -1 - may be the beginning of a function definition, - * append another line and look again. - * The reason we don't attempt to convert function prototypes is that - * Ghostscript's declaration-generating macros look too much like - * prototypes, and confuse the algorithms. - */ -int -test1(buf) - char *buf; -{ register char *p = buf; - char *bend; - char *endfn; - int contin; - - if ( !isidfirstchar(*p) ) - return 0; /* no name at left margin */ - bend = skipspace(buf + strlen(buf) - 1, -1); - switch ( *bend ) - { - case ';': contin = 0 /*2*/; break; - case ')': contin = 1; break; - case '{': return 0; /* not a function */ - case '}': return 0; /* not a function */ - default: contin = -1; - } - while ( isidchar(*p) ) - p++; - endfn = p; - p = skipspace(p, 1); - if ( *p++ != '(' ) - return 0; /* not a function */ - p = skipspace(p, 1); - if ( *p == ')' ) - return 0; /* no parameters */ - /* Check that the apparent function name isn't a keyword. */ - /* We only need to check for keywords that could be followed */ - /* by a left parenthesis (which, unfortunately, is most of them). */ - { static char *words[] = - { "asm", "auto", "case", "char", "const", "double", - "extern", "float", "for", "if", "int", "long", - "register", "return", "short", "signed", "sizeof", - "static", "switch", "typedef", "unsigned", - "void", "volatile", "while", 0 - }; - char **key = words; - char *kp; - int len = endfn - buf; - - while ( (kp = *key) != 0 ) - { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) - return 0; /* name is a keyword */ - key++; - } - } - return contin; -} - -/* Convert a recognized function definition or header to K&R syntax. */ -int -convert1(buf, out, header, convert_varargs) - char *buf; - FILE *out; - int header; /* Boolean */ - int convert_varargs; /* Boolean */ -{ char *endfn; - register char *p; - char **breaks; - unsigned num_breaks = 2; /* for testing */ - char **btop; - char **bp; - char **ap; - char *vararg = 0; - - /* Pre-ANSI implementations don't agree on whether strchr */ - /* is called strchr or index, so we open-code it here. */ - for ( endfn = buf; *(endfn++) != '('; ) - ; -top: p = endfn; - breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); - if ( breaks == 0 ) - { /* Couldn't allocate break table, give up */ - fprintf(stderr, "Unable to allocate break table!\n"); - fputs(buf, out); - return -1; - } - btop = breaks + num_breaks * 2 - 2; - bp = breaks; - /* Parse the argument list */ - do - { int level = 0; - char *lp = NULL; - char *rp; - char *end = NULL; - - if ( bp >= btop ) - { /* Filled up break table. */ - /* Allocate a bigger one and start over. */ - free((char *)breaks); - num_breaks <<= 1; - goto top; - } - *bp++ = p; - /* Find the end of the argument */ - for ( ; end == NULL; p++ ) - { switch(*p) - { - case ',': - if ( !level ) end = p; - break; - case '(': - if ( !level ) lp = p; - level++; - break; - case ')': - if ( --level < 0 ) end = p; - else rp = p; - break; - case '/': - p = skipspace(p, 1) - 1; - break; - default: - ; - } - } - /* Erase any embedded prototype parameters. */ - if ( lp ) - writeblanks(lp + 1, rp); - p--; /* back up over terminator */ - /* Find the name being declared. */ - /* This is complicated because of procedure and */ - /* array modifiers. */ - for ( ; ; ) - { p = skipspace(p - 1, -1); - switch ( *p ) - { - case ']': /* skip array dimension(s) */ - case ')': /* skip procedure args OR name */ - { int level = 1; - while ( level ) - switch ( *--p ) - { - case ']': case ')': level++; break; - case '[': case '(': level--; break; - case '/': p = skipspace(p, -1) + 1; break; - default: ; - } - } - if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) - { /* We found the name being declared */ - while ( !isidfirstchar(*p) ) - p = skipspace(p, 1) + 1; - goto found; - } - break; - default: - goto found; - } - } -found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) - { if ( convert_varargs ) - { *bp++ = "va_alist"; - vararg = p-2; - } - else - { p++; - if ( bp == breaks + 1 ) /* sole argument */ - writeblanks(breaks[0], p); - else - writeblanks(bp[-1] - 1, p); - bp--; - } - } - else - { while ( isidchar(*p) ) p--; - *bp++ = p+1; - } - p = end; - } - while ( *p++ == ',' ); - *bp = p; - /* Make a special check for 'void' arglist */ - if ( bp == breaks+2 ) - { p = skipspace(breaks[0], 1); - if ( !strncmp(p, "void", 4) ) - { p = skipspace(p+4, 1); - if ( p == breaks[2] - 1 ) - { bp = breaks; /* yup, pretend arglist is empty */ - writeblanks(breaks[0], p + 1); - } - } - } - /* Put out the function name and left parenthesis. */ - p = buf; - while ( p != endfn ) putc(*p, out), p++; - /* Put out the declaration. */ - if ( header ) - { fputs(");", out); - for ( p = breaks[0]; *p; p++ ) - if ( *p == '\r' || *p == '\n' ) - putc(*p, out); - } - else - { for ( ap = breaks+1; ap < bp; ap += 2 ) - { p = *ap; - while ( isidchar(*p) ) - putc(*p, out), p++; - if ( ap < bp - 1 ) - fputs(", ", out); - } - fputs(") ", out); - /* Put out the argument declarations */ - for ( ap = breaks+2; ap <= bp; ap += 2 ) - (*ap)[-1] = ';'; - if ( vararg != 0 ) - { *vararg = 0; - fputs(breaks[0], out); /* any prior args */ - fputs("va_dcl", out); /* the final arg */ - fputs(bp[0], out); - } - else - fputs(breaks[0], out); - } - free((char *)breaks); - return 0; -} diff --git a/Jpeg/change.log b/Jpeg/change.log deleted file mode 100644 index 74102c0..0000000 --- a/Jpeg/change.log +++ /dev/null @@ -1,217 +0,0 @@ -CHANGE LOG for Independent JPEG Group's JPEG software - - -Version 6b 27-Mar-1998 ------------------------ - -jpegtran has new features for lossless image transformations (rotation -and flipping) as well as "lossless" reduction to grayscale. - -jpegtran now copies comments by default; it has a -copy switch to enable -copying all APPn blocks as well, or to suppress comments. (Formerly it -always suppressed comments and APPn blocks.) jpegtran now also preserves -JFIF version and resolution information. - -New decompressor library feature: COM and APPn markers found in the input -file can be saved in memory for later use by the application. (Before, -you had to code this up yourself with a custom marker processor.) - -There is an unused field "void * client_data" now in compress and decompress -parameter structs; this may be useful in some applications. - -JFIF version number information is now saved by the decoder and accepted by -the encoder. jpegtran uses this to copy the source file's version number, -to ensure "jpegtran -copy all" won't create bogus files that contain JFXX -extensions but claim to be version 1.01. Applications that generate their -own JFXX extension markers also (finally) have a supported way to cause the -encoder to emit JFIF version number 1.02. - -djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather -than as unknown APP0 markers. - -In -verbose mode, djpeg and rdjpgcom will try to print the contents of -APP12 markers as text. Some digital cameras store useful text information -in APP12 markers. - -Handling of truncated data streams is more robust: blocks beyond the one in -which the error occurs will be output as uniform gray, or left unchanged -if decoding a progressive JPEG. The appearance no longer depends on the -Huffman tables being used. - -Huffman tables are checked for validity much more carefully than before. - -To avoid the Unisys LZW patent, djpeg's GIF output capability has been -changed to produce "uncompressed GIFs", and cjpeg's GIF input capability -has been removed altogether. We're not happy about it either, but there -seems to be no good alternative. - -The configure script now supports building libjpeg as a shared library -on many flavors of Unix (all the ones that GNU libtool knows how to -build shared libraries for). Use "./configure --enable-shared" to -try this out. - -New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. -Also, a jconfig file and a build script for Metrowerks CodeWarrior -on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there -are miscellaneous other minor improvements in the makefiles. - -jmemmac.c now knows how to create temporary files following Mac System 7 -conventions. - -djpeg's -map switch is now able to read raw-format PPM files reliably. - -cjpeg -progressive -restart no longer generates any unnecessary DRI markers. - -Multiple calls to jpeg_simple_progression for a single JPEG object -no longer leak memory. - - -Version 6a 7-Feb-96 --------------------- - -Library initialization sequence modified to detect version mismatches -and struct field packing mismatches between library and calling application. -This change requires applications to be recompiled, but does not require -any application source code change. - -All routine declarations changed to the style "GLOBAL(type) name ...", -that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the -routine's return type as an argument. This makes it possible to add -Microsoft-style linkage keywords to all the routines by changing just -these macros. Note that any application code that was using these macros -will have to be changed. - -DCT coefficient quantization tables are now stored in normal array order -rather than zigzag order. Application code that calls jpeg_add_quant_table, -or otherwise manipulates quantization tables directly, will need to be -changed. If you need to make such code work with either older or newer -versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is -recommended. - -djpeg's trace capability now dumps DQT tables in natural order, not zigzag -order. This allows the trace output to be made into a "-qtables" file -more easily. - -New system-dependent memory manager module for use on Apple Macintosh. - -Fix bug in cjpeg's -smooth option: last one or two scanlines would be -duplicates of the prior line unless the image height mod 16 was 1 or 2. - -Repair minor problems in VMS, BCC, MC6 makefiles. - -New configure script based on latest GNU Autoconf. - -Correct the list of include files needed by MetroWerks C for ccommand(). - -Numerous small documentation updates. - - -Version 6 2-Aug-95 -------------------- - -Progressive JPEG support: library can read and write full progressive JPEG -files. A "buffered image" mode supports incremental decoding for on-the-fly -display of progressive images. Simply recompiling an existing IJG-v5-based -decoder with v6 should allow it to read progressive files, though of course -without any special progressive display. - -New "jpegtran" application performs lossless transcoding between different -JPEG formats; primarily, it can be used to convert baseline to progressive -JPEG and vice versa. In support of jpegtran, the library now allows lossless -reading and writing of JPEG files as DCT coefficient arrays. This ability -may be of use in other applications. - -Notes for programmers: -* We changed jpeg_start_decompress() to be able to suspend; this makes all -decoding modes available to suspending-input applications. However, -existing applications that use suspending input will need to be changed -to check the return value from jpeg_start_decompress(). You don't need to -do anything if you don't use a suspending data source. -* We changed the interface to the virtual array routines: access_virt_array -routines now take a count of the number of rows to access this time. The -last parameter to request_virt_array routines is now interpreted as the -maximum number of rows that may be accessed at once, but not necessarily -the height of every access. - - -Version 5b 15-Mar-95 ---------------------- - -Correct bugs with grayscale images having v_samp_factor > 1. - -jpeg_write_raw_data() now supports output suspension. - -Correct bugs in "configure" script for case of compiling in -a directory other than the one containing the source files. - -Repair bug in jquant1.c: sometimes didn't use as many colors as it could. - -Borland C makefile and jconfig file work under either MS-DOS or OS/2. - -Miscellaneous improvements to documentation. - - -Version 5a 7-Dec-94 --------------------- - -Changed color conversion roundoff behavior so that grayscale values are -represented exactly. (This causes test image files to change.) - -Make ordered dither use 16x16 instead of 4x4 pattern for a small quality -improvement. - -New configure script based on latest GNU Autoconf. -Fix configure script to handle CFLAGS correctly. -Rename *.auto files to *.cfg, so that configure script still works if -file names have been truncated for DOS. - -Fix bug in rdbmp.c: didn't allow for extra data between header and image. - -Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. - -Fix several bugs in rdrle.c. - -NEED_SHORT_EXTERNAL_NAMES option was broken. - -Revise jerror.h/jerror.c for more flexibility in message table. - -Repair oversight in jmemname.c NO_MKTEMP case: file could be there -but unreadable. - - -Version 5 24-Sep-94 --------------------- - -Version 5 represents a nearly complete redesign and rewrite of the IJG -software. Major user-visible changes include: - * Automatic configuration simplifies installation for most Unix systems. - * A range of speed vs. image quality tradeoffs are supported. - This includes resizing of an image during decompression: scaling down - by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. - * New programs rdjpgcom and wrjpgcom allow insertion and extraction - of text comments in a JPEG file. - -The application programmer's interface to the library has changed completely. -Notable improvements include: - * We have eliminated the use of callback routines for handling the - uncompressed image data. The application now sees the library as a - set of routines that it calls to read or write image data on a - scanline-by-scanline basis. - * The application image data is represented in a conventional interleaved- - pixel format, rather than as a separate array for each color channel. - This can save a copying step in many programs. - * The handling of compressed data has been cleaned up: the application can - supply routines to source or sink the compressed data. It is possible to - suspend processing on source/sink buffer overrun, although this is not - supported in all operating modes. - * All static state has been eliminated from the library, so that multiple - instances of compression or decompression can be active concurrently. - * JPEG abbreviated datastream formats are supported, ie, quantization and - Huffman tables can be stored separately from the image data. - * And not only that, but the documentation of the library has improved - considerably! - - -The last widely used release before the version 5 rewrite was version 4A of -18-Feb-93. Change logs before that point have been discarded, since they -are not of much interest after the rewrite. diff --git a/Jpeg/jchuff.c b/Jpeg/jchuff.c deleted file mode 100644 index 45b3d2b..0000000 --- a/Jpeg/jchuff.c +++ /dev/null @@ -1,909 +0,0 @@ -/* - * jchuff.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines. - * - * Much of the complexity here has to do with supporting output suspension. - * If the data destination module demands suspension, we want to be able to - * back up to the start of the current MCU. To do this, we copy state - * variables into local working storage, and update them back to the - * permanent JPEG objects only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jchuff.h" /* Declarations shared with jcphuff.c */ - - -/* Expanded entropy encoder object for Huffman encoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - JPEG_INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).put_buffer = (src).put_buffer, \ - (dest).put_bits = (src).put_bits, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - savable_state saved; /* Bit buffer & DC state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - -#ifdef ENTROPY_OPT_SUPPORTED /* Statistics tables for optimization */ - long * dc_count_ptrs[NUM_HUFF_TBLS]; - long * ac_count_ptrs[NUM_HUFF_TBLS]; -#endif -} huff_entropy_encoder; - -typedef huff_entropy_encoder * huff_entropy_ptr; - -/* Working state while writing an MCU. - * This struct contains all the fields that are needed by subroutines. - */ - -typedef struct { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - savable_state cur; /* Current bit buffer & DC state */ - j_compress_ptr cinfo; /* dump_buffer needs access to this */ -} working_state; - - -/* Forward declarations */ -METHODDEF(wxjpeg_boolean) encode_mcu_huff JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(void) finish_pass_huff JPP((j_compress_ptr cinfo)); -#ifdef ENTROPY_OPT_SUPPORTED -METHODDEF(wxjpeg_boolean) encode_mcu_gather JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(void) finish_pass_gather JPP((j_compress_ptr cinfo)); -#endif - - -/* - * Initialize for a Huffman-compressed scan. - * If gather_statistics is TRUE, we do not output anything during the scan, - * just count the Huffman symbols used and generate Huffman code tables. - */ - -METHODDEF(void) -start_pass_huff (j_compress_ptr cinfo, wxjpeg_boolean gather_statistics) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - - if (gather_statistics) { -#ifdef ENTROPY_OPT_SUPPORTED - entropy->pub.encode_mcu = encode_mcu_gather; - entropy->pub.finish_pass = finish_pass_gather; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - entropy->pub.encode_mcu = encode_mcu_huff; - entropy->pub.finish_pass = finish_pass_huff; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - if (gather_statistics) { -#ifdef ENTROPY_OPT_SUPPORTED - /* Check for invalid table indexes */ - /* (make_c_derived_tbl does this in the other path) */ - if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); - if (actbl < 0 || actbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->dc_count_ptrs[dctbl] == NULL) - entropy->dc_count_ptrs[dctbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long)); - if (entropy->ac_count_ptrs[actbl] == NULL) - entropy->ac_count_ptrs[actbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long)); -#endif - } else { - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl, - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_c_derived_tbl(cinfo, FALSE, actbl, - & entropy->ac_derived_tbls[actbl]); - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bit buffer to empty */ - entropy->saved.put_buffer = 0; - entropy->saved.put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* - * Compute the derived values for a Huffman table. - * This routine also performs some validation checks on the table. - * - * Note this is also used by jcphuff.c. - */ - -GLOBAL(void) -jpeg_make_c_derived_tbl (j_compress_ptr cinfo, wxjpeg_boolean isDC, int tblno, - c_derived_tbl ** pdtbl) -{ - JHUFF_TBL *htbl; - c_derived_tbl *dtbl; - int p, i, l, lastp, si, maxsymbol; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Note that huffsize[] and huffcode[] are filled in code-length order, - * paralleling the order of the symbols themselves in htbl->huffval[]. - */ - - /* Find the input Huffman table */ - if (tblno < 0 || tblno >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - htbl = - isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (c_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(c_derived_tbl)); - dtbl = *pdtbl; - - /* Figure C.1: make table of Huffman code length for each symbol */ - - p = 0; - for (l = 1; l <= 16; l++) { - i = (int) htbl->bits[l]; - if (i < 0 || p + i > 256) /* protect against table overrun */ - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - while (i--) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - lastp = p; - - /* Figure C.2: generate the codes themselves */ - /* We also validate that the counts represent a legal Huffman code tree. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - /* code is now 1 more than the last code used for codelength si; but - * it must still fit in si bits, since no code is allowed to be all ones. - */ - if (((JPEG_INT32) code) >= (((JPEG_INT32) 1) << si)) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - code <<= 1; - si++; - } - - /* Figure C.3: generate encoding tables */ - /* These are code and size indexed by symbol value */ - - /* Set all codeless symbols to have code length 0; - * this lets us detect duplicate VAL entries here, and later - * allows emit_bits to detect any attempt to emit such symbols. - */ - MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); - - /* This is also a convenient place to check for out-of-range - * and duplicated VAL entries. We allow 0..255 for AC symbols - * but only 0..15 for DC. (We could constrain them further - * based on data depth and mode, but this seems enough.) - */ - maxsymbol = isDC ? 15 : 255; - - for (p = 0; p < lastp; p++) { - i = htbl->huffval[p]; - if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - dtbl->ehufco[i] = huffcode[p]; - dtbl->ehufsi[i] = huffsize[p]; - } -} - - -/* Outputting bytes to the file */ - -/* Emit a byte, taking 'action' if must suspend. */ -#define emit_byte(state,val,action) \ - { *(state)->next_output_byte++ = (JOCTET) (val); \ - if (--(state)->free_in_buffer == 0) \ - if (! dump_buffer(state)) \ - { action; } } - - -LOCAL(wxjpeg_boolean) -dump_buffer (working_state * state) -/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ -{ - struct jpeg_destination_mgr * dest = state->cinfo->dest; - - if (! (*dest->empty_output_buffer) (state->cinfo)) - return FALSE; - /* After a successful buffer dump, must reset buffer pointers */ - state->next_output_byte = dest->next_output_byte; - state->free_in_buffer = dest->free_in_buffer; - return TRUE; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL(wxjpeg_boolean) -emit_bits (working_state * state, unsigned int code, int size) -/* Emit some bits; return TRUE if successful, FALSE if must suspend */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register JPEG_INT32 put_buffer = (JPEG_INT32) code; - register int put_bits = state->cur.put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); - - put_buffer &= (((JPEG_INT32) 1)<cur.put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte(state, c, return FALSE); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte(state, 0, return FALSE); - } - put_buffer <<= 8; - put_bits -= 8; - } - - state->cur.put_buffer = put_buffer; /* update state variables */ - state->cur.put_bits = put_bits; - - return TRUE; -} - - -LOCAL(wxjpeg_boolean) -flush_bits (working_state * state) -{ - if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */ - return FALSE; - state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ - state->cur.put_bits = 0; - return TRUE; -} - - -/* Encode a single block's worth of coefficients */ - -LOCAL(wxjpeg_boolean) -encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, - c_derived_tbl *dctbl, c_derived_tbl *actbl) -{ - register int temp, temp2; - register int nbits; - register int k, r, i; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = temp2 = block[0] - last_dc_val; - - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); - - /* Emit the Huffman-coded symbol for the number of bits */ - if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - if (! emit_bits(state, (unsigned int) temp2, nbits)) - return FALSE; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k < DCTSIZE2; k++) { - if ((temp = block[jpeg_natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) - return FALSE; - r -= 16; - } - - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); - - /* Emit Huffman symbol for run length / number of bits */ - i = (r << 4) + nbits; - if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (! emit_bits(state, (unsigned int) temp2, nbits)) - return FALSE; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0])) - return FALSE; - - return TRUE; -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL(wxjpeg_boolean) -emit_restart (working_state * state, int restart_num) -{ - int ci; - - if (! flush_bits(state)) - return FALSE; - - emit_byte(state, 0xFF, return FALSE); - emit_byte(state, JPEG_RST0 + restart_num, return FALSE); - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) - state->cur.last_dc_val[ci] = 0; - - /* The restart counter is not updated until we successfully write the MCU. */ - - return TRUE; -} - - -/* - * Encode and output one MCU's worth of Huffman-compressed coefficients. - */ - -METHODDEF(wxjpeg_boolean) -encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - int blkn, ci; - jpeg_component_info * compptr; - - /* Load up working state */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! emit_restart(&state, entropy->next_restart_num)) - return FALSE; - } - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - if (! encode_one_block(&state, - MCU_data[blkn][0], state.cur.last_dc_val[ci], - entropy->dc_derived_tbls[compptr->dc_tbl_no], - entropy->ac_derived_tbls[compptr->ac_tbl_no])) - return FALSE; - /* Update last_dc_val */ - state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - /* Completed MCU, so update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed scan. - */ - -METHODDEF(void) -finish_pass_huff (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - - /* Load up working state ... flush_bits needs it */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Flush out the last data */ - if (! flush_bits(&state)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - - /* Update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); -} - - -/* - * Huffman coding optimization. - * - * We first scan the supplied data and count the number of uses of each symbol - * that is to be Huffman-coded. (This process MUST agree with the code above.) - * Then we build a Huffman coding tree for the observed counts. - * Symbols which are not needed at all for the particular image are not - * assigned any code, which saves space in the DHT marker as well as in - * the compressed data. - */ - -#ifdef ENTROPY_OPT_SUPPORTED - - -/* Process a single block's worth of coefficients */ - -LOCAL(void) -htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, - long dc_counts[], long ac_counts[]) -{ - register int temp; - register int nbits; - register int k, r; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = block[0] - last_dc_val; - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count the Huffman symbol for the number of bits */ - dc_counts[nbits]++; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k < DCTSIZE2; k++) { - if ((temp = block[jpeg_natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - ac_counts[0xF0]++; - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count Huffman symbol for run length / number of bits */ - ac_counts[(r << 4) + nbits]++; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - ac_counts[0]++; -} - - -/* - * Trial-encode one MCU's worth of Huffman-compressed coefficients. - * No data is actually output, so no suspension return is possible. - */ - -METHODDEF(wxjpeg_boolean) -encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn, ci; - jpeg_component_info * compptr; - - /* Take care of restart intervals if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Update restart state */ - entropy->restarts_to_go = cinfo->restart_interval; - } - entropy->restarts_to_go--; - } - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], - entropy->dc_count_ptrs[compptr->dc_tbl_no], - entropy->ac_count_ptrs[compptr->ac_tbl_no]); - entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - return TRUE; -} - - -/* - * Generate the best Huffman code table for the given counts, fill htbl. - * Note this is also used by jcphuff.c. - * - * The JPEG standard requires that no symbol be assigned a codeword of all - * one bits (so that padding bits added at the end of a compressed segment - * can't look like a valid code). Because of the canonical ordering of - * codewords, this just means that there must be an unused slot in the - * longest codeword length category. Section K.2 of the JPEG spec suggests - * reserving such a slot by pretending that symbol 256 is a valid symbol - * with count 1. In theory that's not optimal; giving it count zero but - * including it in the symbol set anyway should give a better Huffman code. - * But the theoretically better code actually seems to come out worse in - * practice, because it produces more all-ones bytes (which incur stuffed - * zero bytes in the final file). In any case the difference is tiny. - * - * The JPEG standard requires Huffman codes to be no more than 16 bits long. - * If some symbols have a very small but nonzero probability, the Huffman tree - * must be adjusted to meet the code length restriction. We currently use - * the adjustment method suggested in JPEG section K.2. This method is *not* - * optimal; it may not choose the best possible limited-length code. But - * typically only very-low-frequency symbols will be given less-than-optimal - * lengths, so the code is almost optimal. Experimental comparisons against - * an optimal limited-length-code algorithm indicate that the difference is - * microscopic --- usually less than a hundredth of a percent of total size. - * So the extra complexity of an optimal algorithm doesn't seem worthwhile. - */ - -GLOBAL(void) -jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) -{ -#define MAX_CLEN 32 /* assumed maximum initial code length */ - UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ - int codesize[257]; /* codesize[k] = code length of symbol k */ - int others[257]; /* next symbol in current branch of tree */ - int c1, c2; - int p, i, j; - long v; - - /* This algorithm is explained in section K.2 of the JPEG standard */ - - MEMZERO(bits, SIZEOF(bits)); - MEMZERO(codesize, SIZEOF(codesize)); - for (i = 0; i < 257; i++) - others[i] = -1; /* init links to empty */ - - freq[256] = 1; /* make sure 256 has a nonzero count */ - /* Including the pseudo-symbol 256 in the Huffman procedure guarantees - * that no real symbol is given code-value of all ones, because 256 - * will be placed last in the largest codeword category. - */ - - /* Huffman's basic algorithm to assign optimal code lengths to symbols */ - - for (;;) { - /* Find the smallest nonzero frequency, set c1 = its symbol */ - /* In case of ties, take the larger symbol number */ - c1 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v) { - v = freq[i]; - c1 = i; - } - } - - /* Find the next smallest nonzero frequency, set c2 = its symbol */ - /* In case of ties, take the larger symbol number */ - c2 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v && i != c1) { - v = freq[i]; - c2 = i; - } - } - - /* Done if we've merged everything into one frequency */ - if (c2 < 0) - break; - - /* Else merge the two counts/trees */ - freq[c1] += freq[c2]; - freq[c2] = 0; - - /* Increment the codesize of everything in c1's tree branch */ - codesize[c1]++; - while (others[c1] >= 0) { - c1 = others[c1]; - codesize[c1]++; - } - - others[c1] = c2; /* chain c2 onto c1's tree branch */ - - /* Increment the codesize of everything in c2's tree branch */ - codesize[c2]++; - while (others[c2] >= 0) { - c2 = others[c2]; - codesize[c2]++; - } - } - - /* Now count the number of symbols of each code length */ - for (i = 0; i <= 256; i++) { - if (codesize[i]) { - /* The JPEG standard seems to think that this can't happen, */ - /* but I'm paranoid... */ - if (codesize[i] > MAX_CLEN) - ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); - - bits[codesize[i]]++; - } - } - - /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure - * Huffman procedure assigned any such lengths, we must adjust the coding. - * Here is what the JPEG spec says about how this next bit works: - * Since symbols are paired for the longest Huffman code, the symbols are - * removed from this length category two at a time. The prefix for the pair - * (which is one bit shorter) is allocated to one of the pair; then, - * skipping the BITS entry for that prefix length, a code word from the next - * shortest nonzero BITS entry is converted into a prefix for two code words - * one bit longer. - */ - - for (i = MAX_CLEN; i > 16; i--) { - while (bits[i] > 0) { - j = i - 2; /* find length of new prefix to be used */ - while (bits[j] == 0) - j--; - - bits[i] -= 2; /* remove two symbols */ - bits[i-1]++; /* one goes in this length */ - bits[j+1] += 2; /* two new symbols in this length */ - bits[j]--; /* symbol of this length is now a prefix */ - } - } - - /* Remove the count for the pseudo-symbol 256 from the largest codelength */ - while (bits[i] == 0) /* find largest codelength still in use */ - i--; - bits[i]--; - - /* Return final symbol counts (only for lengths 0..16) */ - MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); - - /* Return a list of the symbols sorted by code length */ - /* It's not real clear to me why we don't need to consider the codelength - * changes made above, but the JPEG spec seems to think this works. - */ - p = 0; - for (i = 1; i <= MAX_CLEN; i++) { - for (j = 0; j <= 255; j++) { - if (codesize[j] == i) { - htbl->huffval[p] = (UINT8) j; - p++; - } - } - } - - /* Set sent_table FALSE so updated table will be written to JPEG file. */ - htbl->sent_table = FALSE; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF(void) -finish_pass_gather (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - wxjpeg_boolean did_dc[NUM_HUFF_TBLS]; - wxjpeg_boolean did_ac[NUM_HUFF_TBLS]; - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - MEMZERO(did_dc, SIZEOF(did_dc)); - MEMZERO(did_ac, SIZEOF(did_ac)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - if (! did_dc[dctbl]) { - htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]); - did_dc[dctbl] = TRUE; - } - if (! did_ac[actbl]) { - htblptr = & cinfo->ac_huff_tbl_ptrs[actbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]); - did_ac[actbl] = TRUE; - } - } -} - - -#endif /* ENTROPY_OPT_SUPPORTED */ - - -/* - * Module initialization routine for Huffman entropy encoding. - */ - -GLOBAL(void) -jinit_huff_encoder (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_huff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; -#ifdef ENTROPY_OPT_SUPPORTED - entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; -#endif - } -} diff --git a/Jpeg/jchuff.h b/Jpeg/jchuff.h deleted file mode 100644 index 881962a..0000000 --- a/Jpeg/jchuff.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * jchuff.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy encoding routines - * that are shared between the sequential encoder (jchuff.c) and the - * progressive encoder (jcphuff.c). No other modules need to see these. - */ - -/* The legal range of a DCT coefficient is - * -1024 .. +1023 for 8-bit data; - * -16384 .. +16383 for 12-bit data. - * Hence the magnitude should always fit in 10 or 14 bits respectively. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MAX_COEF_BITS 10 -#else -#define MAX_COEF_BITS 14 -#endif - -/* Derived data constructed for each Huffman table */ - -typedef struct { - unsigned int ehufco[256]; /* code for each symbol */ - char ehufsi[256]; /* length of code for each symbol */ - /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ -} c_derived_tbl; - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_c_derived_tbl jMkCDerived -#define jpeg_gen_optimal_table jGenOptTbl -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Expand a Huffman table definition into the derived format */ -EXTERN(void) jpeg_make_c_derived_tbl - JPP((j_compress_ptr cinfo, wxjpeg_boolean isDC, int tblno, - c_derived_tbl ** pdtbl)); - -/* Generate an optimal table definition given the specified counts */ -EXTERN(void) jpeg_gen_optimal_table - JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])); diff --git a/Jpeg/jcinit.c b/Jpeg/jcinit.c deleted file mode 100644 index b9e68a9..0000000 --- a/Jpeg/jcinit.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * jcinit.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains initialization logic for the JPEG compressor. - * This routine is in charge of selecting the modules to be executed and - * making an initialization call to each one. - * - * Logically, this code belongs in jcmaster.c. It's split out because - * linking this routine implies linking the entire compression library. - * For a transcoding-only application, we want to be able to use jcmaster.c - * without linking in the whole library. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Master selection of compression modules. - * This is done once at the start of processing an image. We determine - * which modules will be used and give them appropriate initialization calls. - */ - -GLOBAL(void) -jinit_compress_master (j_compress_ptr cinfo) -{ - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, FALSE /* full compression */); - - /* Preprocessing */ - if (! cinfo->raw_data_in) { - jinit_color_converter(cinfo); - jinit_downsampler(cinfo); - jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); - } - /* Forward DCT */ - jinit_forward_dct(cinfo); - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - jinit_phuff_encoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_encoder(cinfo); - } - - /* Need a full-image coefficient buffer in any multi-pass mode. */ - jinit_c_coef_controller(cinfo, - (wxjpeg_boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); - jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} diff --git a/Jpeg/jcomapi.c b/Jpeg/jcomapi.c deleted file mode 100644 index 9b1fa75..0000000 --- a/Jpeg/jcomapi.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * jcomapi.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface routines that are used for both - * compression and decompression. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Abort processing of a JPEG compression or decompression operation, - * but don't destroy the object itself. - * - * For this, we merely clean up all the nonpermanent memory pools. - * Note that temp files (virtual arrays) are not allowed to belong to - * the permanent pool, so we will be able to close all temp files here. - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL(void) -jpeg_abort (j_common_ptr cinfo) -{ - int pool; - - /* Do nothing if called on a not-initialized or destroyed JPEG object. */ - if (cinfo->mem == NULL) - return; - - /* Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { - (*cinfo->mem->free_pool) (cinfo, pool); - } - - /* Reset overall state for possible reuse of object */ - if (cinfo->is_decompressor) { - cinfo->global_state = DSTATE_START; - /* Try to keep application from accessing now-deleted marker list. - * A bit kludgy to do it here, but this is the most central place. - */ - ((j_decompress_ptr) cinfo)->marker_list = NULL; - } else { - cinfo->global_state = CSTATE_START; - } -} - - -/* - * Destruction of a JPEG object. - * - * Everything gets deallocated except the master jpeg_compress_struct itself - * and the error manager struct. Both of these are supplied by the application - * and must be freed, if necessary, by the application. (Often they are on - * the stack and so don't need to be freed anyway.) - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL(void) -jpeg_destroy (j_common_ptr cinfo) -{ - /* We need only tell the memory manager to release everything. */ - /* NB: mem pointer is NULL if memory mgr failed to initialize. */ - if (cinfo->mem != NULL) - (*cinfo->mem->self_destruct) (cinfo); - cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ - cinfo->global_state = 0; /* mark it destroyed */ -} - - -/* - * Convenience routines for allocating quantization and Huffman tables. - * (Would jutils.c be a more reasonable place to put these?) - */ - -GLOBAL(JQUANT_TBL *) -jpeg_alloc_quant_table (j_common_ptr cinfo) -{ - JQUANT_TBL *tbl; - - tbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} - - -GLOBAL(JHUFF_TBL *) -jpeg_alloc_huff_table (j_common_ptr cinfo) -{ - JHUFF_TBL *tbl; - - tbl = (JHUFF_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} diff --git a/Jpeg/jconfig.h b/Jpeg/jconfig.h deleted file mode 100644 index 254d926..0000000 --- a/Jpeg/jconfig.h +++ /dev/null @@ -1,109 +0,0 @@ -/* This test added by JACS as a quick fix. What should we do - * to make it work with configure? - */ - -#if defined(_MSC_VER) || defined(__BORLANDC__) || defined (__DMC__) -#include "jconfig.vc" -#else - -/* jconfig.h. Generated automatically by configure. */ -/* jconfig.cfg --- source file edited by configure script */ -/* see jconfig.doc for explanations */ - -/* If using MetroWerks on Mac define __WXMAC__ if it isn't already - FIXME: Is this necessary any longer? */ -#ifdef __MWERKS__ -#if (__MWERKS__ < 0x0900) || macintosh || defined ( __MACH__ ) -# ifndef __WXMAC__ -# define __WXMAC__ -# endif -#endif -#endif - -/* use wxWidgets' configure */ -#include "wx/setup.h" - -/* If using Metrowerks and not using configure-generated setup */ -#if defined(__MWERKS__) && !defined(__WX_SETUP_H__) -#if (__MWERKS__ < 0x0900) || macintosh || defined ( __MACH__ ) - -# define USE_MAC_MEMMGR - -# ifdef __MACH__ -# include -# include -# include -# undef WCHAR_MAX -# include -# endif - -/* automatically includes MacHeaders */ -#elif (__MWERKS__ >= 0x0900) && __INTEL__ - #define __WXMSW__ -#endif -#endif - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -#undef void -#undef const - -/* use wxWidgets' configure */ -/* #undef CHAR_IS_UNSIGNED */ -#ifdef __CHAR_UNSIGNED__ - #ifndef CHAR_IS_UNSIGNED - #define CHAR_IS_UNSIGNED - #endif -#else - #undef CHAR_IS_UNSIGNED -#endif - -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -/* Define this if you get warnings about undefined structures. */ -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -/* use wxWidgets' configure */ -/* #define INLINE __inline__ */ -#if defined(__VISAGECPP__) && (__IBMCPP__ >= 400 || __IBMC__ >= 400) -#define INLINE -#elif defined(__WATCOMC__) -#define INLINE -#else -#define INLINE inline -#endif - -/* These are for configuring the JPEG memory manager. */ -#undef DEFAULT_MAX_MEM -#undef NO_MKTEMP - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE - -/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ -#undef PROGRESS_REPORT - -#endif /* JPEG_CJPEG_DJPEG */ -#endif - /* _MSC_VER */ - diff --git a/Jpeg/jcphuff.c b/Jpeg/jcphuff.c deleted file mode 100644 index 84e53f4..0000000 --- a/Jpeg/jcphuff.c +++ /dev/null @@ -1,833 +0,0 @@ -/* - * jcphuff.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines for progressive JPEG. - * - * We do not support output suspension in this module, since the library - * currently does not allow multiple-scan files to be written with output - * suspension. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jchuff.h" /* Declarations shared with jchuff.c */ - -#ifdef C_PROGRESSIVE_SUPPORTED - -/* Expanded entropy encoder object for progressive Huffman encoding. */ - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - /* Mode flag: TRUE for optimization, FALSE for actual data output */ - wxjpeg_boolean gather_statistics; - - /* Bit-level coding status. - * next_output_byte/free_in_buffer are local copies of cinfo->dest fields. - */ - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - JPEG_INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ - - /* Coding status for DC components */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ - - /* Coding status for AC components */ - int ac_tbl_no; /* the table number of the single component */ - unsigned int EOBRUN; /* run length of EOBs */ - unsigned int BE; /* # of buffered correction bits before MCU */ - char * bit_buffer; /* buffer for correction bits (1 per char) */ - /* packing correction bits tightly would save some space but cost time... */ - - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan). - * Since any one scan codes only DC or only AC, we only need one set - * of tables, not one for DC and one for AC. - */ - c_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - /* Statistics tables for optimization; again, one set is enough */ - long * count_ptrs[NUM_HUFF_TBLS]; -} phuff_entropy_encoder; - -typedef phuff_entropy_encoder * phuff_entropy_ptr; - -/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit - * buffer can hold. Larger sizes may slightly improve compression, but - * 1000 is already well into the realm of overkill. - * The minimum safe size is 64 bits. - */ - -#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ - -/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. - * We assume that int right shift is unsigned if INT32 right shift is, - * which should be safe. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS int ishift_temp; -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -/* Forward declarations */ -METHODDEF(wxjpeg_boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(wxjpeg_boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(wxjpeg_boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(wxjpeg_boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo)); -METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo)); - - -/* - * Initialize for a Huffman-compressed scan using progressive JPEG. - */ - -METHODDEF(void) -start_pass_phuff (j_compress_ptr cinfo, wxjpeg_boolean gather_statistics) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - wxjpeg_boolean is_DC_band; - int ci, tbl; - jpeg_component_info * compptr; - - entropy->cinfo = cinfo; - entropy->gather_statistics = gather_statistics; - - is_DC_band = (cinfo->Ss == 0); - - /* We assume jcmaster.c already validated the scan parameters. */ - - /* Select execution routines */ - if (cinfo->Ah == 0) { - if (is_DC_band) - entropy->pub.encode_mcu = encode_mcu_DC_first; - else - entropy->pub.encode_mcu = encode_mcu_AC_first; - } else { - if (is_DC_band) - entropy->pub.encode_mcu = encode_mcu_DC_refine; - else { - entropy->pub.encode_mcu = encode_mcu_AC_refine; - /* AC refinement needs a correction bit buffer */ - if (entropy->bit_buffer == NULL) - entropy->bit_buffer = (char *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - MAX_CORR_BITS * SIZEOF(char)); - } - } - if (gather_statistics) - entropy->pub.finish_pass = finish_pass_gather_phuff; - else - entropy->pub.finish_pass = finish_pass_phuff; - - /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1 - * for AC coefficients. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Initialize DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - /* Get table index */ - if (is_DC_band) { - if (cinfo->Ah != 0) /* DC refinement needs no table */ - continue; - tbl = compptr->dc_tbl_no; - } else { - entropy->ac_tbl_no = tbl = compptr->ac_tbl_no; - } - if (gather_statistics) { - /* Check for invalid table index */ - /* (make_c_derived_tbl does this in the other path) */ - if (tbl < 0 || tbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->count_ptrs[tbl] == NULL) - entropy->count_ptrs[tbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long)); - } else { - /* Compute derived values for Huffman table */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl, - & entropy->derived_tbls[tbl]); - } - } - - /* Initialize AC stuff */ - entropy->EOBRUN = 0; - entropy->BE = 0; - - /* Initialize bit buffer to empty */ - entropy->put_buffer = 0; - entropy->put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* Outputting bytes to the file. - * NB: these must be called only when actually outputting, - * that is, entropy->gather_statistics == FALSE. - */ - -/* Emit a byte */ -#define emit_byte(entropy,val) \ - { *(entropy)->next_output_byte++ = (JOCTET) (val); \ - if (--(entropy)->free_in_buffer == 0) \ - dump_buffer(entropy); } - - -LOCAL(void) -dump_buffer (phuff_entropy_ptr entropy) -/* Empty the output buffer; we do not support suspension in this module. */ -{ - struct jpeg_destination_mgr * dest = entropy->cinfo->dest; - - if (! (*dest->empty_output_buffer) (entropy->cinfo)) - ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); - /* After a successful buffer dump, must reset buffer pointers */ - entropy->next_output_byte = dest->next_output_byte; - entropy->free_in_buffer = dest->free_in_buffer; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL(void) -emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size) -/* Emit some bits, unless we are in gather mode */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register JPEG_INT32 put_buffer = (JPEG_INT32) code; - register int put_bits = entropy->put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - if (entropy->gather_statistics) - return; /* do nothing if we're only getting stats */ - - put_buffer &= (((JPEG_INT32) 1)<put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte(entropy, c); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte(entropy, 0); - } - put_buffer <<= 8; - put_bits -= 8; - } - - entropy->put_buffer = put_buffer; /* update variables */ - entropy->put_bits = put_bits; -} - - -LOCAL(void) -flush_bits (phuff_entropy_ptr entropy) -{ - emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */ - entropy->put_buffer = 0; /* and reset bit-buffer to empty */ - entropy->put_bits = 0; -} - - -/* - * Emit (or just count) a Huffman symbol. - */ - -INLINE -LOCAL(void) -emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol) -{ - if (entropy->gather_statistics) - entropy->count_ptrs[tbl_no][symbol]++; - else { - c_derived_tbl * tbl = entropy->derived_tbls[tbl_no]; - emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); - } -} - - -/* - * Emit bits from a correction bit buffer. - */ - -LOCAL(void) -emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart, - unsigned int nbits) -{ - if (entropy->gather_statistics) - return; /* no real work */ - - while (nbits > 0) { - emit_bits(entropy, (unsigned int) (*bufstart), 1); - bufstart++; - nbits--; - } -} - - -/* - * Emit any pending EOBRUN symbol. - */ - -LOCAL(void) -emit_eobrun (phuff_entropy_ptr entropy) -{ - register int temp, nbits; - - if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ - temp = entropy->EOBRUN; - nbits = 0; - while ((temp >>= 1)) - nbits++; - /* safety check: shouldn't happen given limited correction-bit buffer */ - if (nbits > 14) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4); - if (nbits) - emit_bits(entropy, entropy->EOBRUN, nbits); - - entropy->EOBRUN = 0; - - /* Emit any buffered correction bits */ - emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); - entropy->BE = 0; - } -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL(void) -emit_restart (phuff_entropy_ptr entropy, int restart_num) -{ - int ci; - - emit_eobrun(entropy); - - if (! entropy->gather_statistics) { - flush_bits(entropy); - emit_byte(entropy, 0xFF); - emit_byte(entropy, JPEG_RST0 + restart_num); - } - - if (entropy->cinfo->Ss == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) - entropy->last_dc_val[ci] = 0; - } else { - /* Re-initialize all AC-related fields to 0 */ - entropy->EOBRUN = 0; - entropy->BE = 0; - } -} - - -/* - * MCU encoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(wxjpeg_boolean) -encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - int blkn, ci; - int Al = cinfo->Al; - JBLOCKROW block; - jpeg_component_info * compptr; - ISHIFT_TEMPS - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - - /* Compute the DC value after the required point transform by Al. - * This is simply an arithmetic right shift. - */ - temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); - - /* DC differences are figured on the point-transformed values. */ - temp = temp2 - entropy->last_dc_val[ci]; - entropy->last_dc_val[ci] = temp2; - - /* Encode the DC coefficient difference per section G.1.2.1 */ - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count/emit the Huffman-coded symbol for the number of bits */ - emit_symbol(entropy, compptr->dc_tbl_no, nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - emit_bits(entropy, (unsigned int) temp2, nbits); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(wxjpeg_boolean) -encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - register int r, k; - int Se = cinfo->Se; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ - - r = 0; /* r = run length of zeros */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = (*block)[jpeg_natural_order[k]]) == 0) { - r++; - continue; - } - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value; so the code is - * interwoven with finding the abs value (temp) and output bits (temp2). - */ - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ - temp2 = ~temp; - } else { - temp >>= Al; /* apply the point transform */ - temp2 = temp; - } - /* Watch out for case that nonzero coef is zero after point transform */ - if (temp == 0) { - r++; - continue; - } - - /* Emit any pending EOBRUN */ - if (entropy->EOBRUN > 0) - emit_eobrun(entropy); - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - emit_bits(entropy, (unsigned int) temp2, nbits); - - r = 0; /* reset zero run length */ - } - - if (r > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - if (entropy->EOBRUN == 0x7FFF) - emit_eobrun(entropy); /* force it out to avoid overflow */ - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF(wxjpeg_boolean) -encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp; - int blkn; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* We simply emit the Al'th bit of the DC coefficient value. */ - temp = (*block)[0]; - emit_bits(entropy, (unsigned int) (temp >> Al), 1); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC successive approximation refinement scan. - */ - -METHODDEF(wxjpeg_boolean) -encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp; - register int r, k; - int EOB; - char *BR_buffer; - unsigned int BR; - int Se = cinfo->Se; - int Al = cinfo->Al; - JBLOCKROW block; - int absvalues[DCTSIZE2]; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* It is convenient to make a pre-pass to determine the transformed - * coefficients' absolute values and the EOB position. - */ - EOB = 0; - for (k = cinfo->Ss; k <= Se; k++) { - temp = (*block)[jpeg_natural_order[k]]; - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value. - */ - if (temp < 0) - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - absvalues[k] = temp; /* save abs value for main pass */ - if (temp == 1) - EOB = k; /* EOB = index of last newly-nonzero coef */ - } - - /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ - - r = 0; /* r = run length of zeros */ - BR = 0; /* BR = count of buffered bits added now */ - BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = absvalues[k]) == 0) { - r++; - continue; - } - - /* Emit any required ZRLs, but not if they can be folded into EOB */ - while (r > 15 && k <= EOB) { - /* emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - /* Emit ZRL */ - emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - /* Emit buffered correction bits that must be associated with ZRL */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - } - - /* If the coef was previously nonzero, it only needs a correction bit. - * NOTE: a straight translation of the spec's figure G.7 would suggest - * that we also need to test r > 15. But if r > 15, we can only get here - * if k > EOB, which implies that this coefficient is not 1. - */ - if (temp > 1) { - /* The correction bit is the next bit of the absolute value. */ - BR_buffer[BR++] = (char) (temp & 1); - continue; - } - - /* Emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); - - /* Emit output bit for newly-nonzero coef */ - temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1; - emit_bits(entropy, (unsigned int) temp, 1); - - /* Emit buffered correction bits that must be associated with this code */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - r = 0; /* reset zero run length */ - } - - if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - entropy->BE += BR; /* concat my correction bits to older ones */ - /* We force out the EOB if we risk either: - * 1. overflow of the EOB counter; - * 2. overflow of the correction bit buffer during the next MCU. - */ - if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) - emit_eobrun(entropy); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed progressive scan. - */ - -METHODDEF(void) -finish_pass_phuff (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Flush out any buffered data */ - emit_eobrun(entropy); - flush_bits(entropy); - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF(void) -finish_pass_gather_phuff (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - wxjpeg_boolean is_DC_band; - int ci, tbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - wxjpeg_boolean did[NUM_HUFF_TBLS]; - - /* Flush out buffered data (all we care about is counting the EOB symbol) */ - emit_eobrun(entropy); - - is_DC_band = (cinfo->Ss == 0); - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - MEMZERO(did, SIZEOF(did)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - if (is_DC_band) { - if (cinfo->Ah != 0) /* DC refinement needs no table */ - continue; - tbl = compptr->dc_tbl_no; - } else { - tbl = compptr->ac_tbl_no; - } - if (! did[tbl]) { - if (is_DC_band) - htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; - else - htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]); - did[tbl] = TRUE; - } - } -} - - -/* - * Module initialization routine for progressive Huffman entropy encoding. - */ - -GLOBAL(void) -jinit_phuff_encoder (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy; - int i; - - entropy = (phuff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(phuff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_phuff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - entropy->count_ptrs[i] = NULL; - } - entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ -} - -#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/Jpeg/jdcolor.c b/Jpeg/jdcolor.c deleted file mode 100644 index cca2842..0000000 --- a/Jpeg/jdcolor.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * jdcolor.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains output colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#if defined(__VISAGECPP__) -/* Visual Age fixups for multiple declarations */ -# define null_convert null_convert2 /* already in jcmaint.c */ -# define grayscale_convert grayscale_convert2 /* already in jcmaint.c */ -#endif - -/* Private subobject */ - -typedef struct { - struct jpeg_color_deconverter pub; /* public fields */ - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - JPEG_INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - JPEG_INT32 * Cb_g_tab; /* => table for Cb to G conversion */ -} my_color_deconverter; - -typedef my_color_deconverter * my_cconvert_ptr; - - -/**************** YCbCr -> RGB conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * R = Y + 1.40200 * Cr - * G = Y - 0.34414 * Cb - 0.71414 * Cr - * B = Y + 1.77200 * Cb - * where Cb and Cr represent the incoming values less CENTERJSAMPLE. - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * Notice that Y, being an integral input, does not contribute any fraction - * so it need not participate in the rounding. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times Cb and Cr for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The Cr=>R and Cb=>B values can be rounded to integers in advance; the - * values for the G calculation are left scaled up, since we must add them - * together before rounding. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((JPEG_INT32) ((x) * (1L<RGB colorspace conversion. - */ - -LOCAL(void) -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - int i; - JPEG_INT32 x; - SHIFT_TEMPS - - cconvert->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cr_g_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(JPEG_INT32)); - cconvert->Cb_g_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(JPEG_INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - cconvert->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - cconvert->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Convert some rows of samples to the output colorspace. - * - * Note that we change from noninterleaved, one-plane-per-component format - * to interleaved-pixel format. The output buffer is therefore three times - * as wide as the input buffer. - * A starting row offset is provided only for the input buffer. The caller - * can easily adjust the passed output_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF(void) -ycc_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register JPEG_INT32 * Crgtab = cconvert->Cr_g_tab; - register JPEG_INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; - outptr[RGB_GREEN] = range_limit[y + - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS))]; - outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/**************** Cases other than YCbCr -> RGB **************/ - - -/* - * Color conversion for no colorspace change: just copy the data, - * converting from separate-planes to interleaved representation. - */ - -METHODDEF(void) -null_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION count; - register int num_components = cinfo->num_components; - JDIMENSION num_cols = cinfo->output_width; - int ci; - - while (--num_rows >= 0) { - for (ci = 0; ci < num_components; ci++) { - inptr = input_buf[ci][input_row]; - outptr = output_buf[0] + ci; - for (count = num_cols; count > 0; count--) { - *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ - outptr += num_components; - } - } - input_row++; - output_buf++; - } -} - - -/* - * Color conversion for grayscale: just copy the data. - * This also works for YCbCr -> grayscale conversion, in which - * we just copy the Y (luminance) component and ignore chrominance. - */ - -METHODDEF(void) -grayscale_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, - num_rows, cinfo->output_width); -} - - -/* - * Convert grayscale to RGB: just duplicate the graylevel three times. - * This is provided to support applications that don't want to cope - * with grayscale as a separate case. - */ - -METHODDEF(void) -gray_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - inptr = input_buf[0][input_row++]; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - /* We can dispense with GETJSAMPLE() here */ - outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/* - * Adobe-style YCCK->CMYK conversion. - * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same - * conversion as above, while passing K (black) unchanged. - * We assume build_ycc_rgb_table has been called. - */ - -METHODDEF(void) -ycck_cmyk_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2, inptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register JPEG_INT32 * Crgtab = cconvert->Cr_g_tab; - register JPEG_INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - inptr3 = input_buf[3][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ - outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS)))]; - outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ - /* K passes through unchanged */ - outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ - outptr += 4; - } - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF(void) -start_pass_dcolor (j_decompress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for output colorspace conversion. - */ - -GLOBAL(void) -jinit_color_deconverter (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - int ci; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_deconverter)); - cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; - cconvert->pub.start_pass = start_pass_dcolor; - - /* Make sure num_components agrees with jpeg_color_space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_RGB: - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->num_components < 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - } - - /* Set out_color_components and conversion method based on requested space. - * Also clear the component_needed flags for any unused components, - * so that earlier pipeline stages can avoid useless computation. - */ - - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - if (cinfo->jpeg_color_space == JCS_GRAYSCALE || - cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = grayscale_convert; - /* For color->grayscale conversion, only the Y (0) component is needed */ - for (ci = 1; ci < cinfo->num_components; ci++) - cinfo->comp_info[ci].component_needed = FALSE; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - cinfo->out_color_components = RGB_PIXELSIZE; - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgb_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { - cconvert->pub.color_convert = gray_rgb_convert; - } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - cinfo->out_color_components = 4; - if (cinfo->jpeg_color_space == JCS_YCCK) { - cconvert->pub.color_convert = ycck_cmyk_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_CMYK) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: - /* Permit null conversion to same output space */ - if (cinfo->out_color_space == cinfo->jpeg_color_space) { - cinfo->out_color_components = cinfo->num_components; - cconvert->pub.color_convert = null_convert; - } else /* unsupported non-null conversion */ - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - } - - if (cinfo->quantize_colors) - cinfo->output_components = 1; /* single colormapped output component */ - else - cinfo->output_components = cinfo->out_color_components; -} - -#if defined(__VISAGECPP__) -# ifdef null_convert2 -# undef null_convert2 -# endif -# ifdef grayscale_convert2 -# undef grayscale_convert2 -# endif -#endif diff --git a/Jpeg/jdct.h b/Jpeg/jdct.h deleted file mode 100644 index 42180f3..0000000 --- a/Jpeg/jdct.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * jdct.h - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file contains common declarations for the forward and - * inverse DCT modules. These declarations are private to the DCT managers - * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. - * The individual DCT algorithms are kept in separate files to ease - * machine-dependent tuning (e.g., assembly coding). - */ - - -/* - * A forward DCT routine is given a pointer to a work area of type DCTELEM[]; - * the DCT is to be performed in-place in that buffer. Type DCTELEM is int - * for 8-bit samples, INT32 for 12-bit samples. (NOTE: Floating-point DCT - * implementations use an array of type FAST_FLOAT, instead.) - * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE). - * The DCT outputs are returned scaled up by a factor of 8; they therefore - * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This - * convention improves accuracy in integer implementations and saves some - * work in floating-point ones. - * Quantization of the output coefficients is done by jcdctmgr.c. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef int DCTELEM; /* 16 or 32 bits is fine */ -#else -typedef JPEG_INT32 DCTELEM; /* must have 32 bits */ -#endif - -typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data)); -typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data)); - - -/* - * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer - * to an output sample array. The routine must dequantize the input data as - * well as perform the IDCT; for dequantization, it uses the multiplier table - * pointed to by compptr->dct_table. The output data is to be placed into the - * sample array starting at a specified column. (Any row offset needed will - * be applied to the array pointer before it is passed to the IDCT code.) - * Note that the number of samples emitted by the IDCT routine is - * DCT_scaled_size * DCT_scaled_size. - */ - -/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ - -/* - * Each IDCT routine has its own ideas about the best dct_table element type. - */ - -typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ -#if BITS_IN_JSAMPLE == 8 -typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ -#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ -#else -typedef JPEG_INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ -#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ -#endif -typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ - - -/* - * Each IDCT routine is responsible for range-limiting its results and - * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could - * be quite far out of range if the input data is corrupt, so a bulletproof - * range-limiting step is required. We use a mask-and-table-lookup method - * to do the combined operations quickly. See the comments with - * prepare_range_limit_table (in jdmaster.c) for more info. - */ - -#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) - -#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_fdct_islow jFDislow -#define jpeg_fdct_ifast jFDifast -#define jpeg_fdct_float jFDfloat -#define jpeg_idct_islow jRDislow -#define jpeg_idct_ifast jRDifast -#define jpeg_idct_float jRDfloat -#define jpeg_idct_4x4 jRD4x4 -#define jpeg_idct_2x2 jRD2x2 -#define jpeg_idct_1x1 jRD1x1 -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Extern declarations for the forward and inverse DCT routines. */ - -EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data)); -EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data)); -EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data)); - -EXTERN(void) jpeg_idct_islow - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_ifast - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_float - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_4x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_2x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_1x1 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); - - -/* - * Macros for handling fixed-point arithmetic; these are used by many - * but not all of the DCT/IDCT modules. - * - * All values are expected to be of type INT32. - * Fractional constants are scaled left by CONST_BITS bits. - * CONST_BITS is defined within each module using these macros, - * and may differ from one module to the next. - */ - -#define ONE ((JPEG_INT32) 1) -#define CONST_SCALE (ONE << CONST_BITS) - -/* Convert a positive real constant to an integer scaled by CONST_SCALE. - * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, - * thus causing a lot of useless floating-point operations at run time. - */ - -#define FIX(x) ((JPEG_INT32) ((x) * CONST_SCALE + 0.5)) - -/* Descale and correctly round an INT32 value that's scaled by N bits. - * We assume RIGHT_SHIFT rounds towards minus infinity, so adding - * the fudge factor is correct for either sign of X. - */ - -#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * This macro is used only when the two inputs will actually be no more than - * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a - * full 32x32 multiply. This provides a useful speedup on many machines. - * Unfortunately there is no way to specify a 16x16->32 multiply portably - * in C, but some C compilers will do the right thing if you provide the - * correct combination of casts. - */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) -#endif -#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((JPEG_INT32) (const))) -#endif - -#ifndef MULTIPLY16C16 /* default definition */ -#define MULTIPLY16C16(var,const) ((var) * (const)) -#endif - -/* Same except both inputs are variables. */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) -#endif - -#ifndef MULTIPLY16V16 /* default definition */ -#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) -#endif diff --git a/Jpeg/jdhuff.c b/Jpeg/jdhuff.c deleted file mode 100644 index dccbc52..0000000 --- a/Jpeg/jdhuff.c +++ /dev/null @@ -1,651 +0,0 @@ -/* - * jdhuff.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdphuff.c */ - - -/* - * Expanded entropy decoder object for Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - - /* Precalculated info set up by start_pass for use in decode_mcu: */ - - /* Pointers to derived tables to be used for each block within an MCU */ - d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; - d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; - /* Whether we care about the DC and AC coefficient values for each block */ - wxjpeg_boolean dc_needed[D_MAX_BLOCKS_IN_MCU]; - wxjpeg_boolean ac_needed[D_MAX_BLOCKS_IN_MCU]; -} huff_entropy_decoder; - -typedef huff_entropy_decoder * huff_entropy_ptr; - - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF(void) -start_pass_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, blkn, dctbl, actbl; - jpeg_component_info * compptr; - - /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. - * This ought to be an error condition, but we make it a warning because - * there are some baseline files out there with all zeroes in these bytes. - */ - if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 || - cinfo->Ah != 0 || cinfo->Al != 0) - WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl, - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_d_derived_tbl(cinfo, FALSE, actbl, - & entropy->ac_derived_tbls[actbl]); - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Precalculate decoding info for each block in an MCU of this scan */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - /* Precalculate which table to use for each block */ - entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; - entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; - /* Decide whether we really care about the coefficient values */ - if (compptr->component_needed) { - entropy->dc_needed[blkn] = TRUE; - /* we don't need the ACs if producing a 1/8th-size image */ - entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1); - } else { - entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE; - } - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->pub.insufficient_data = FALSE; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Compute the derived values for a Huffman table. - * This routine also performs some validation checks on the table. - * - * Note this is also used by jdphuff.c. - */ - -GLOBAL(void) -jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, wxjpeg_boolean isDC, int tblno, - d_derived_tbl ** pdtbl) -{ - JHUFF_TBL *htbl; - d_derived_tbl *dtbl; - int p, i, l, si, numsymbols; - int lookbits, ctr; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Note that huffsize[] and huffcode[] are filled in code-length order, - * paralleling the order of the symbols themselves in htbl->huffval[]. - */ - - /* Find the input Huffman table */ - if (tblno < 0 || tblno >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - htbl = - isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (d_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(d_derived_tbl)); - dtbl = *pdtbl; - dtbl->pub = htbl; /* fill in back link */ - - /* Figure C.1: make table of Huffman code length for each symbol */ - - p = 0; - for (l = 1; l <= 16; l++) { - i = (int) htbl->bits[l]; - if (i < 0 || p + i > 256) /* protect against table overrun */ - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - while (i--) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - numsymbols = p; - - /* Figure C.2: generate the codes themselves */ - /* We also validate that the counts represent a legal Huffman code tree. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - /* code is now 1 more than the last code used for codelength si; but - * it must still fit in si bits, since no code is allowed to be all ones. - */ - if (((JPEG_INT32) code) >= (((JPEG_INT32) 1) << si)) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - code <<= 1; - si++; - } - - /* Figure F.15: generate decoding tables for bit-sequential decoding */ - - p = 0; - for (l = 1; l <= 16; l++) { - if (htbl->bits[l]) { - /* valoffset[l] = huffval[] index of 1st symbol of code length l, - * minus the minimum code of length l - */ - dtbl->valoffset[l] = (JPEG_INT32) p - (JPEG_INT32) huffcode[p]; - p += htbl->bits[l]; - dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ - } else { - dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ - } - } - dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ - - /* Compute lookahead tables to speed up decoding. - * First we set all the table entries to 0, indicating "too long"; - * then we iterate through the Huffman codes that are short enough and - * fill in all the entries that correspond to bit sequences starting - * with that code. - */ - - MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); - - p = 0; - for (l = 1; l <= HUFF_LOOKAHEAD; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { - /* l = current code's length, p = its index in huffcode[] & huffval[]. */ - /* Generate left-justified code followed by all possible bit sequences */ - lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); - for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { - dtbl->look_nbits[lookbits] = l; - dtbl->look_sym[lookbits] = htbl->huffval[p]; - lookbits++; - } - } - } - - /* Validate symbols as being reasonable. - * For AC tables, we make no check, but accept all byte values 0..255. - * For DC tables, we require the symbols to be in range 0..15. - * (Tighter bounds could be applied depending on the data depth and mode, - * but this is sufficient to ensure safe decoding.) - */ - if (isDC) { - for (i = 0; i < numsymbols; i++) { - int sym = htbl->huffval[i]; - if (sym < 0 || sym > 15) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - } - } -} - - -/* - * Out-of-line code for bit fetching (shared with jdphuff.c). - * See jdhuff.h for info about usage. - * Note: current values of get_buffer and bits_left are passed as parameters, - * but are returned in the corresponding fields of the state struct. - * - * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width - * of get_buffer to be used. (On machines with wider words, an even larger - * buffer could be used.) However, on some machines 32-bit shifts are - * quite slow and take time proportional to the number of places shifted. - * (This is true with most PC compilers, for instance.) In this case it may - * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the - * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. - */ - -#ifdef SLOW_SHIFT_32 -#define MIN_GET_BITS 15 /* minimum allowable value */ -#else -#define MIN_GET_BITS (BIT_BUF_SIZE-7) -#endif - - -GLOBAL(wxjpeg_boolean) -jpeg_fill_bit_buffer (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits) -/* Load up the bit buffer to a depth of at least nbits */ -{ - /* Copy heavily used state fields into locals (hopefully registers) */ - register const JOCTET * next_input_byte = state->next_input_byte; - register size_t bytes_in_buffer = state->bytes_in_buffer; - j_decompress_ptr cinfo = state->cinfo; - - /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ - /* (It is assumed that no request will be for more than that many bits.) */ - /* We fail to do so only if we hit a marker or are forced to suspend. */ - - if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ - while (bits_left < MIN_GET_BITS) { - register int c; - - /* Attempt to read a byte */ - if (bytes_in_buffer == 0) { - if (! (*cinfo->src->fill_input_buffer) (cinfo)) - return FALSE; - next_input_byte = cinfo->src->next_input_byte; - bytes_in_buffer = cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - - /* If it's 0xFF, check and discard stuffed zero byte */ - if (c == 0xFF) { - /* Loop here to discard any padding FF's on terminating marker, - * so that we can save a valid unread_marker value. NOTE: we will - * accept multiple FF's followed by a 0 as meaning a single FF data - * byte. This data pattern is not valid according to the standard. - */ - do { - if (bytes_in_buffer == 0) { - if (! (*cinfo->src->fill_input_buffer) (cinfo)) - return FALSE; - next_input_byte = cinfo->src->next_input_byte; - bytes_in_buffer = cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - } while (c == 0xFF); - - if (c == 0) { - /* Found FF/00, which represents an FF data byte */ - c = 0xFF; - } else { - /* Oops, it's actually a marker indicating end of compressed data. - * Save the marker code for later use. - * Fine point: it might appear that we should save the marker into - * bitread working state, not straight into permanent state. But - * once we have hit a marker, we cannot need to suspend within the - * current MCU, because we will read no more bytes from the data - * source. So it is OK to update permanent state right away. - */ - cinfo->unread_marker = c; - /* See if we need to insert some fake zero bits. */ - goto no_more_bytes; - } - } - - /* OK, load c into get_buffer */ - get_buffer = (get_buffer << 8) | c; - bits_left += 8; - } /* end while */ - } else { - no_more_bytes: - /* We get here if we've read the marker that terminates the compressed - * data segment. There should be enough bits in the buffer register - * to satisfy the request; if so, no problem. - */ - if (nbits > bits_left) { - /* Uh-oh. Report corrupted data to user and stuff zeroes into - * the data stream, so that we can produce some kind of image. - * We use a nonvolatile flag to ensure that only one warning message - * appears per data segment. - */ - if (! cinfo->entropy->insufficient_data) { - WARNMS(cinfo, JWRN_HIT_MARKER); - cinfo->entropy->insufficient_data = TRUE; - } - /* Fill the buffer with zero bits */ - get_buffer <<= MIN_GET_BITS - bits_left; - bits_left = MIN_GET_BITS; - } - } - - /* Unload the local registers */ - state->next_input_byte = next_input_byte; - state->bytes_in_buffer = bytes_in_buffer; - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - return TRUE; -} - - -/* - * Out-of-line code for Huffman code decoding. - * See jdhuff.h for info about usage. - */ - -GLOBAL(int) -jpeg_huff_decode (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits) -{ - register int l = min_bits; - register JPEG_INT32 code; - - /* HUFF_DECODE has determined that the code is at least min_bits */ - /* bits long, so fetch that many bits in one swoop. */ - - CHECK_BIT_BUFFER(*state, l, return -1); - code = GET_BITS(l); - - /* Collect the rest of the Huffman code one bit at a time. */ - /* This is per Figure F.16 in the JPEG spec. */ - - while (code > htbl->maxcode[l]) { - code <<= 1; - CHECK_BIT_BUFFER(*state, 1, return -1); - code |= GET_BITS(1); - l++; - } - - /* Unload the local registers */ - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - /* With garbage input we may reach the sentinel value l = 17. */ - - if (l > 16) { - WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); - return 0; /* fake a zero as the safest result */ - } - - return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL(wxjpeg_boolean) -process_restart (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Reset out-of-data flag, unless read_restart_marker left us smack up - * against a marker. In that case we will end up treating the next data - * segment as empty, and we can avoid producing bogus output pixels by - * leaving the flag set. - */ - if (cinfo->unread_marker == 0) - entropy->pub.insufficient_data = FALSE; - - return TRUE; -} - - -/* - * Decode and return one MCU's worth of Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER. - * (Wholesale zeroing is usually a little faster than retail...) - * - * Returns FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * this module, since we'll just re-assign them on the next call.) - */ - -METHODDEF(wxjpeg_boolean) -decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn; - BITREAD_STATE_VARS; - savable_state state; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - JBLOCKROW block = MCU_data[blkn]; - d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn]; - d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn]; - register int s, k, r; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - if (entropy->dc_needed[blkn]) { - /* Convert DC difference to actual value, update last_dc_val */ - int ci = cinfo->MCU_membership[blkn]; - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */ - (*block)[0] = (JCOEF) s; - } - - if (entropy->ac_needed[blkn]) { - - /* Section F.2.2.2: decode the AC coefficients */ - /* Since zeroes are skipped, output area must be cleared beforehand */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label2); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Output coefficient in natural (dezigzagged) order. - * Note: the extra entries in jpeg_natural_order[] will save us - * if k >= DCTSIZE2, which could happen if the data is corrupted. - */ - (*block)[jpeg_natural_order[k]] = (JCOEF) s; - } else { - if (r != 15) - break; - k += 15; - } - } - - } else { - - /* Section F.2.2.2: decode the AC coefficients */ - /* In this path we just discard the values */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - - } - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * Module initialization routine for Huffman entropy decoding. - */ - -GLOBAL(void) -jinit_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_huff_decoder; - entropy->pub.decode_mcu = decode_mcu; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; - } -} diff --git a/Jpeg/jdhuff.h b/Jpeg/jdhuff.h deleted file mode 100644 index 9e9e87d..0000000 --- a/Jpeg/jdhuff.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * jdhuff.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy decoding routines - * that are shared between the sequential decoder (jdhuff.c) and the - * progressive decoder (jdphuff.c). No other modules need to see these. - */ - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_d_derived_tbl jMkDDerived -#define jpeg_fill_bit_buffer jFilBitBuf -#define jpeg_huff_decode jHufDecode -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Derived data constructed for each Huffman table */ - -#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ - -typedef struct { - /* Basic tables: (element [0] of each array is unused) */ - JPEG_INT32 maxcode[18]; /* largest code of length k (-1 if none) */ - /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ - JPEG_INT32 valoffset[17]; /* huffval[] offset for codes of length k */ - /* valoffset[k] = huffval[] index of 1st symbol of code length k, less - * the smallest code of length k; so given a code of length k, the - * corresponding symbol is huffval[code + valoffset[k]] - */ - - /* Link to public Huffman table (needed only in jpeg_huff_decode) */ - JHUFF_TBL *pub; - - /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of - * the input data stream. If the next Huffman code is no more - * than HUFF_LOOKAHEAD bits long, we can obtain its length and - * the corresponding symbol directly from these tables. - */ - int look_nbits[1< 32 bits on your machine, and shifting/masking longs is - * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE - * appropriately should be a win. Unfortunately we can't define the size - * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) - * because not all machines measure sizeof in 8-bit bytes. - */ - -typedef struct { /* Bitreading state saved across MCUs */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ -} bitread_perm_state; - -typedef struct { /* Bitreading working state within an MCU */ - /* Current data source location */ - /* We need a copy, rather than munging the original, in case of suspension */ - const JOCTET * next_input_byte; /* => next byte to read from source */ - size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ - /* Bit input buffer --- note these values are kept in register variables, - * not in this struct, inside the inner loops. - */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - /* Pointer needed by jpeg_fill_bit_buffer. */ - j_decompress_ptr cinfo; /* back link to decompress master record */ -} bitread_working_state; - -/* Macros to declare and load/save bitread local variables. */ -#define BITREAD_STATE_VARS \ - register bit_buf_type get_buffer; \ - register int bits_left; \ - bitread_working_state br_state - -#define BITREAD_LOAD_STATE(cinfop,permstate) \ - br_state.cinfo = cinfop; \ - br_state.next_input_byte = cinfop->src->next_input_byte; \ - br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ - get_buffer = permstate.get_buffer; \ - bits_left = permstate.bits_left; - -#define BITREAD_SAVE_STATE(cinfop,permstate) \ - cinfop->src->next_input_byte = br_state.next_input_byte; \ - cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ - permstate.get_buffer = get_buffer; \ - permstate.bits_left = bits_left - -/* - * These macros provide the in-line portion of bit fetching. - * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer - * before using GET_BITS, PEEK_BITS, or DROP_BITS. - * The variables get_buffer and bits_left are assumed to be locals, - * but the state struct might not be (jpeg_huff_decode needs this). - * CHECK_BIT_BUFFER(state,n,action); - * Ensure there are N bits in get_buffer; if suspend, take action. - * val = GET_BITS(n); - * Fetch next N bits. - * val = PEEK_BITS(n); - * Fetch next N bits without removing them from the buffer. - * DROP_BITS(n); - * Discard next N bits. - * The value N should be a simple variable, not an expression, because it - * is evaluated multiple times. - */ - -#define CHECK_BIT_BUFFER(state,nbits,action) \ - { if (bits_left < (nbits)) { \ - if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ - { action; } \ - get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } - -#define GET_BITS(nbits) \ - (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1)) - -#define PEEK_BITS(nbits) \ - (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1)) - -#define DROP_BITS(nbits) \ - (bits_left -= (nbits)) - -/* Load up the bit buffer to a depth of at least nbits */ -EXTERN(wxjpeg_boolean) jpeg_fill_bit_buffer - JPP((bitread_working_state * state, register bit_buf_type get_buffer, - register int bits_left, int nbits)); - - -/* - * Code for extracting next Huffman-coded symbol from input bit stream. - * Again, this is time-critical and we make the main paths be macros. - * - * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits - * without looping. Usually, more than 95% of the Huffman codes will be 8 - * or fewer bits long. The few overlength codes are handled with a loop, - * which need not be inline code. - * - * Notes about the HUFF_DECODE macro: - * 1. Near the end of the data segment, we may fail to get enough bits - * for a lookahead. In that case, we do it the hard way. - * 2. If the lookahead table contains no entry, the next code must be - * more than HUFF_LOOKAHEAD bits long. - * 3. jpeg_huff_decode returns -1 if forced to suspend. - */ - -#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ -{ register int nb, look; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - nb = 1; goto slowlabel; \ - } \ - } \ - look = PEEK_BITS(HUFF_LOOKAHEAD); \ - if ((nb = htbl->look_nbits[look]) != 0) { \ - DROP_BITS(nb); \ - result = htbl->look_sym[look]; \ - } else { \ - nb = HUFF_LOOKAHEAD+1; \ -slowlabel: \ - if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ - { failaction; } \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - } \ -} - -/* Out-of-line case for Huffman code fetching */ -EXTERN(int) jpeg_huff_decode - JPP((bitread_working_state * state, register bit_buf_type get_buffer, - register int bits_left, d_derived_tbl * htbl, int min_bits)); diff --git a/Jpeg/jdinput.c b/Jpeg/jdinput.c deleted file mode 100644 index c89b75d..0000000 --- a/Jpeg/jdinput.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * jdinput.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input control logic for the JPEG decompressor. - * These routines are concerned with controlling the decompressor's input - * processing (marker reading and coefficient decoding). The actual input - * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* Private state */ - -typedef struct { - struct jpeg_input_controller pub; /* public fields */ - - wxjpeg_boolean inheaders; /* TRUE until first SOS is reached */ -} my_input_controller; - -typedef my_input_controller * my_inputctl_ptr; - - -/* Forward declarations */ -METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); - - -/* - * Routines to calculate various quantities related to the size of the image. - */ - -LOCAL(void) -initial_setup (j_decompress_ptr cinfo) -/* Called once, when first SOS marker is reached */ -{ - int ci; - jpeg_component_info *compptr; - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE. - * In the full decompressor, this will be overridden by jdmaster.c; - * but in the transcoder, jdmaster.c is not used, so we must do it here. - */ - cinfo->min_DCT_scaled_size = DCTSIZE; - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* downsampled_width and downsampled_height will also be overridden by - * jdmaster.c if we are doing full decompression. The transcoder library - * doesn't use these values, but the calling application might. - */ - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed, until color conversion says otherwise */ - compptr->component_needed = TRUE; - /* Mark no quantization table yet saved for component */ - compptr->quant_table = NULL; - } - - /* Compute number of fully interleaved MCU rows. */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - /* Decide whether file contains multiple scans */ - if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) - cinfo->inputctl->has_multiple_scans = TRUE; - else - cinfo->inputctl->has_multiple_scans = FALSE; -} - - -LOCAL(void) -per_scan_setup (j_decompress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = compptr->DCT_scaled_size; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } -} - - -/* - * Save away a copy of the Q-table referenced by each component present - * in the current scan, unless already saved during a prior scan. - * - * In a multiple-scan JPEG file, the encoder could assign different components - * the same Q-table slot number, but change table definitions between scans - * so that each component uses a different Q-table. (The IJG encoder is not - * currently capable of doing this, but other encoders might.) Since we want - * to be able to dequantize all the components at the end of the file, this - * means that we have to save away the table actually used for each component. - * We do this by copying the table at the start of the first scan containing - * the component. - * The JPEG spec prohibits the encoder from changing the contents of a Q-table - * slot between scans of a component using that slot. If the encoder does so - * anyway, this decoder will simply use the Q-table values that were current - * at the start of the first scan for the component. - * - * The decompressor output side looks only at the saved quant tables, - * not at the current Q-table slots. - */ - -LOCAL(void) -latch_quant_tables (j_decompress_ptr cinfo) -{ - int ci, qtblno; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* No work if we already saved Q-table for this component */ - if (compptr->quant_table != NULL) - continue; - /* Make sure specified quantization table is present */ - qtblno = compptr->quant_tbl_no; - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - /* OK, save away the quantization table */ - qtbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(JQUANT_TBL)); - MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); - compptr->quant_table = qtbl; - } -} - - -/* - * Initialize the input modules to read a scan of compressed data. - * The first call to this is done by jdmaster.c after initializing - * the entire decompressor (during jpeg_start_decompress). - * Subsequent calls come from consume_markers, below. - */ - -METHODDEF(void) -start_input_pass (j_decompress_ptr cinfo) -{ - per_scan_setup(cinfo); - latch_quant_tables(cinfo); - (*cinfo->entropy->start_pass) (cinfo); -#if defined(__VISAGECPP__) - (*cinfo->coef->start_input_pass2) (cinfo); -#else - (*cinfo->coef->start_input_pass) (cinfo); -#endif - cinfo->inputctl->consume_input = cinfo->coef->consume_data; -} - - -/* - * Finish up after inputting a compressed-data scan. - * This is called by the coefficient controller after it's read all - * the expected data of the scan. - */ - -METHODDEF(void) -finish_input_pass (j_decompress_ptr cinfo) -{ - cinfo->inputctl->consume_input = consume_markers; -} - - -/* - * Read JPEG markers before, between, or after compressed-data scans. - * Change state as necessary when a new scan is reached. - * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - * - * The consume_input method pointer points either here or to the - * coefficient controller's consume_data routine, depending on whether - * we are reading a compressed data segment or inter-segment markers. - */ - -METHODDEF(int) -consume_markers (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - int val; - - if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ - return JPEG_REACHED_EOI; - - val = (*cinfo->marker->read_markers) (cinfo); - - switch (val) { - case JPEG_REACHED_SOS: /* Found SOS */ - if (inputctl->inheaders) { /* 1st SOS */ - initial_setup(cinfo); - inputctl->inheaders = FALSE; - /* Note: start_input_pass must be called by jdmaster.c - * before any more input can be consumed. jdapimin.c is - * responsible for enforcing this sequencing. - */ - } else { /* 2nd or later SOS marker */ - if (! inputctl->pub.has_multiple_scans) - ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ - start_input_pass(cinfo); - } - break; - case JPEG_REACHED_EOI: /* Found EOI */ - inputctl->pub.eoi_reached = TRUE; - if (inputctl->inheaders) { /* Tables-only datastream, apparently */ - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_NO_SOS); - } else { - /* Prevent infinite loop in coef ctlr's decompress_data routine - * if user set output_scan_number larger than number of scans. - */ - if (cinfo->output_scan_number > cinfo->input_scan_number) - cinfo->output_scan_number = cinfo->input_scan_number; - } - break; - case JPEG_SUSPENDED: - break; - } - - return val; -} - - -/* - * Reset state to begin a fresh datastream. - */ - -METHODDEF(void) -reset_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - - inputctl->pub.consume_input = consume_markers; - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; - /* Reset other modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->marker->reset_marker_reader) (cinfo); - /* Reset progression state -- would be cleaner if entropy decoder did this */ - cinfo->coef_bits = NULL; -} - - -/* - * Initialize the input controller module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL(void) -jinit_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl; - - /* Create subobject in permanent pool */ - inputctl = (my_inputctl_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_input_controller)); - cinfo->inputctl = (struct jpeg_input_controller *) inputctl; - /* Initialize method pointers */ - inputctl->pub.consume_input = consume_markers; - inputctl->pub.reset_input_controller = reset_input_controller; - inputctl->pub.start_input_pass = start_input_pass; - inputctl->pub.finish_input_pass = finish_input_pass; - /* Initialize state: can't use reset_input_controller since we don't - * want to try to reset other modules yet. - */ - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; -} - diff --git a/Jpeg/jdphuff.c b/Jpeg/jdphuff.c deleted file mode 100644 index 96b4364..0000000 --- a/Jpeg/jdphuff.c +++ /dev/null @@ -1,668 +0,0 @@ -/* - * jdphuff.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines for progressive JPEG. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdhuff.c */ - - -#ifdef D_PROGRESSIVE_SUPPORTED - -/* - * Expanded entropy decoder object for progressive Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).EOBRUN = (src).EOBRUN, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ -} phuff_entropy_decoder; - -typedef phuff_entropy_decoder * phuff_entropy_ptr; - -/* Forward declarations */ -METHODDEF(wxjpeg_boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(wxjpeg_boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(wxjpeg_boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(wxjpeg_boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); - - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF(void) -start_pass_phuff_decoder (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - wxjpeg_boolean is_DC_band, bad; - int ci, coefi, tbl; - int *coef_bit_ptr; - jpeg_component_info * compptr; - - is_DC_band = (cinfo->Ss == 0); - - /* Validate scan parameters */ - bad = FALSE; - if (is_DC_band) { - if (cinfo->Se != 0) - bad = TRUE; - } else { - /* need not check Ss/Se < 0 since they came from unsigned bytes */ - if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2) - bad = TRUE; - /* AC scans may have only one component */ - if (cinfo->comps_in_scan != 1) - bad = TRUE; - } - if (cinfo->Ah != 0) { - /* Successive approximation refinement scan: must have Al = Ah-1. */ - if (cinfo->Al != cinfo->Ah-1) - bad = TRUE; - } - if (cinfo->Al > 13) /* need not check for < 0 */ - bad = TRUE; - /* Arguably the maximum Al value should be less than 13 for 8-bit precision, - * but the spec doesn't say so, and we try to be liberal about what we - * accept. Note: large Al values could result in out-of-range DC - * coefficients during early scans, leading to bizarre displays due to - * overflows in the IDCT math. But we won't crash. - */ - if (bad) - ERREXIT4(cinfo, JERR_BAD_PROGRESSION, - cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); - /* Update progression status, and verify that scan order is legal. - * Note that inter-scan inconsistencies are treated as warnings - * not fatal errors ... not clear if this is right way to behave. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - int cindex = cinfo->cur_comp_info[ci]->component_index; - coef_bit_ptr = & cinfo->coef_bits[cindex][0]; - if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); - for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { - int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; - if (cinfo->Ah != expected) - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); - coef_bit_ptr[coefi] = cinfo->Al; - } - } - - /* Select MCU decoding routine */ - if (cinfo->Ah == 0) { - if (is_DC_band) - entropy->pub.decode_mcu = decode_mcu_DC_first; - else - entropy->pub.decode_mcu = decode_mcu_AC_first; - } else { - if (is_DC_band) - entropy->pub.decode_mcu = decode_mcu_DC_refine; - else - entropy->pub.decode_mcu = decode_mcu_AC_refine; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Make sure requested tables are present, and compute derived tables. - * We may build same derived table more than once, but it's not expensive. - */ - if (is_DC_band) { - if (cinfo->Ah == 0) { /* DC refinement needs no table */ - tbl = compptr->dc_tbl_no; - jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, - & entropy->derived_tbls[tbl]); - } - } else { - tbl = compptr->ac_tbl_no; - jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, - & entropy->derived_tbls[tbl]); - /* remember the single active table */ - entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->pub.insufficient_data = FALSE; - - /* Initialize private state variables */ - entropy->saved.EOBRUN = 0; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL(wxjpeg_boolean) -process_restart (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Re-init EOB run count, too */ - entropy->saved.EOBRUN = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Reset out-of-data flag, unless read_restart_marker left us smack up - * against a marker. In that case we will end up treating the next data - * segment as empty, and we can avoid producing bogus output pixels by - * leaving the flag set. - */ - if (cinfo->unread_marker == 0) - entropy->pub.insufficient_data = FALSE; - - return TRUE; -} - - -/* - * Huffman MCU decoding. - * Each of these routines decodes and returns one MCU's worth of - * Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. - * - * We return FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * spectral selection, since we'll just re-assign them on the next call. - * Successive approximation AC refinement has to be more careful, however.) - */ - -/* - * MCU decoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(wxjpeg_boolean) -decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Al = cinfo->Al; - register int s, r; - int blkn, ci; - JBLOCKROW block; - BITREAD_STATE_VARS; - savable_state state; - d_derived_tbl * tbl; - jpeg_component_info * compptr; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - tbl = entropy->derived_tbls[compptr->dc_tbl_no]; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, tbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* Convert DC difference to actual value, update last_dc_val */ - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ - (*block)[0] = (JCOEF) (s << Al); - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(wxjpeg_boolean) -decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Se = cinfo->Se; - int Al = cinfo->Al; - register int s, k, r; - unsigned int EOBRUN; - JBLOCKROW block; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state. - * We can avoid loading/saving bitread state if in an EOB run. - */ - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ - - /* There is always only one block per MCU */ - - if (EOBRUN > 0) /* if it's a band of zeroes... */ - EOBRUN--; /* ...process it now (we do nothing) */ - else { - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - for (k = cinfo->Ss; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, return FALSE, label2); - r = s >> 4; - s &= 15; - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Scale and output coefficient in natural (dezigzagged) order */ - (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al); - } else { - if (r == 15) { /* ZRL */ - k += 15; /* skip 15 zeroes in band */ - } else { /* EOBr, run length is 2^r + appended bits */ - EOBRUN = 1 << r; - if (r) { /* EOBr, r > 0 */ - CHECK_BIT_BUFFER(br_state, r, return FALSE); - r = GET_BITS(r); - EOBRUN += r; - } - EOBRUN--; /* this band is processed at this moment */ - break; /* force end-of-band */ - } - } - } - - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - } - - /* Completed MCU, so update state */ - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF(wxjpeg_boolean) -decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int blkn; - JBLOCKROW block; - BITREAD_STATE_VARS; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Not worth the cycles to check insufficient_data here, - * since we will not change the data anyway if we read zeroes. - */ - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* Encoded data is simply the next bit of the two's-complement DC value */ - CHECK_BIT_BUFFER(br_state, 1, return FALSE); - if (GET_BITS(1)) - (*block)[0] |= p1; - /* Note: since we use |=, repeating the assignment later is safe */ - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC successive approximation refinement scan. - */ - -METHODDEF(wxjpeg_boolean) -decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Se = cinfo->Se; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ - register int s, k, r; - unsigned int EOBRUN; - JBLOCKROW block; - JCOEFPTR thiscoef; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - int num_newnz; - int newnz_pos[DCTSIZE2]; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, don't modify the MCU. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ - - /* There is always only one block per MCU */ - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - /* If we are forced to suspend, we must undo the assignments to any newly - * nonzero coefficients in the block, because otherwise we'd get confused - * next time about which coefficients were already nonzero. - * But we need not undo addition of bits to already-nonzero coefficients; - * instead, we can test the current bit to see if we already did it. - */ - num_newnz = 0; - - /* initialize coefficient loop counter to start of band */ - k = cinfo->Ss; - - if (EOBRUN == 0) { - for (; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, goto undoit, label3); - r = s >> 4; - s &= 15; - if (s) { - if (s != 1) /* size of new coef should always be 1 */ - WARNMS(cinfo, JWRN_HUFF_BAD_CODE); - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) - s = p1; /* newly nonzero coef is positive */ - else - s = m1; /* newly nonzero coef is negative */ - } else { - if (r != 15) { - EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ - if (r) { - CHECK_BIT_BUFFER(br_state, r, goto undoit); - r = GET_BITS(r); - EOBRUN += r; - } - break; /* rest of block is handled by EOB logic */ - } - /* note s = 0 for processing ZRL */ - } - /* Advance over already-nonzero coefs and r still-zero coefs, - * appending correction bits to the nonzeroes. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - do { - thiscoef = *block + jpeg_natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } else { - if (--r < 0) - break; /* reached target zero coefficient */ - } - k++; - } while (k <= Se); - if (s) { - int pos = jpeg_natural_order[k]; - /* Output newly nonzero coefficient */ - (*block)[pos] = (JCOEF) s; - /* Remember its position in case we have to suspend */ - newnz_pos[num_newnz++] = pos; - } - } - } - - if (EOBRUN > 0) { - /* Scan any remaining coefficient positions after the end-of-band - * (the last newly nonzero coefficient, if any). Append a correction - * bit to each already-nonzero coefficient. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - for (; k <= Se; k++) { - thiscoef = *block + jpeg_natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } - } - /* Count one block completed in EOB run */ - EOBRUN--; - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; - -undoit: - /* Re-zero any output coefficients that we made newly nonzero */ - while (num_newnz > 0) - (*block)[newnz_pos[--num_newnz]] = 0; - - return FALSE; -} - - -/* - * Module initialization routine for progressive Huffman entropy decoding. - */ - -GLOBAL(void) -jinit_phuff_decoder (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy; - int *coef_bit_ptr; - int ci, i; - - entropy = (phuff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(phuff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_phuff_decoder; - - /* Mark derived tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - } - - /* Create progression status table */ - cinfo->coef_bits = (int (*)[DCTSIZE2]) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components*DCTSIZE2*SIZEOF(int)); - coef_bit_ptr = & cinfo->coef_bits[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (i = 0; i < DCTSIZE2; i++) - *coef_bit_ptr++ = -1; -} - -#endif /* D_PROGRESSIVE_SUPPORTED */ diff --git a/Jpeg/jfdctint.c b/Jpeg/jfdctint.c deleted file mode 100644 index 4543b2e..0000000 --- a/Jpeg/jfdctint.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * jfdctint.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D DCT step produces outputs which are a factor of sqrt(N) - * larger than the true DCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D DCT, - * because the y0 and y4 outputs need not be divided by sqrt(N). - * In the IJG code, this factor of 8 is removed by the quantization step - * (in jcdctmgr.c), NOT in this module. - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (For 12-bit sample data, the intermediate - * array is INT32 anyway.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((JPEG_INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((JPEG_INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((JPEG_INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((JPEG_INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((JPEG_INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((JPEG_INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((JPEG_INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((JPEG_INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((JPEG_INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((JPEG_INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((JPEG_INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((JPEG_INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_islow (DCTELEM * data) -{ - JPEG_INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - JPEG_INT32 tmp10, tmp11, tmp12, tmp13; - JPEG_INT32 z1, z2, z3, z4, z5; - DCTELEM *dataptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS); - dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), - CONST_BITS-PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents cos(K*pi/16). - * i0..i3 in the paper are tmp4..tmp7 here. - */ - - z1 = tmp4 + tmp7; - z2 = tmp5 + tmp6; - z3 = tmp4 + tmp6; - z4 = tmp5 + tmp7; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS); - dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), - CONST_BITS+PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents cos(K*pi/16). - * i0..i3 in the paper are tmp4..tmp7 here. - */ - - z1 = tmp4 + tmp7; - z2 = tmp5 + tmp6; - z3 = tmp4 + tmp6; - z4 = tmp5 + tmp7; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/Jpeg/jidctint.c b/Jpeg/jidctint.c deleted file mode 100644 index 2783c23..0000000 --- a/Jpeg/jidctint.c +++ /dev/null @@ -1,389 +0,0 @@ -/* - * jidctint.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) - * larger than the true IDCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D IDCT, - * because the y0 and y4 inputs need not be divided by sqrt(N). - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (To scale up 12-bit sample data further, an - * intermediate INT32 array would be needed.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((JPEG_INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((JPEG_INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((JPEG_INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((JPEG_INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((JPEG_INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((JPEG_INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((JPEG_INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((JPEG_INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((JPEG_INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((JPEG_INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((JPEG_INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((JPEG_INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - JPEG_INT32 tmp0, tmp1, tmp2, tmp3; - JPEG_INT32 tmp10, tmp11, tmp12, tmp13; - JPEG_INT32 z1, z2, z3, z4, z5; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); - tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); - - z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - - tmp0 = (z2 + z3) << CONST_BITS; - tmp1 = (z2 - z3) << CONST_BITS; - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - z1 = tmp0 + tmp3; - z2 = tmp1 + tmp2; - z3 = tmp0 + tmp2; - z4 = tmp1 + tmp3; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - tmp0 += z1 + z3; - tmp1 += z2 + z4; - tmp2 += z2 + z3; - tmp3 += z1 + z4; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*7] = (int) DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*6] = (int) DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*5] = (int) DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*3] = (int) DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*4] = (int) DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((JPEG_INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = (JPEG_INT32) wsptr[2]; - z3 = (JPEG_INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); - tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); - - tmp0 = ((JPEG_INT32) wsptr[0] + (JPEG_INT32) wsptr[4]) << CONST_BITS; - tmp1 = ((JPEG_INT32) wsptr[0] - (JPEG_INT32) wsptr[4]) << CONST_BITS; - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = (JPEG_INT32) wsptr[7]; - tmp1 = (JPEG_INT32) wsptr[5]; - tmp2 = (JPEG_INT32) wsptr[3]; - tmp3 = (JPEG_INT32) wsptr[1]; - - z1 = tmp0 + tmp3; - z2 = tmp1 + tmp2; - z3 = tmp0 + tmp2; - z4 = tmp1 + tmp3; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - tmp0 += z1 + z3; - tmp1 += z2 + z4; - tmp2 += z2 + z3; - tmp3 += z1 + z4; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE(tmp10 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp11 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE(tmp11 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE(tmp12 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE(tmp12 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE(tmp13 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE(tmp13 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/Jpeg/jidctred.c b/Jpeg/jidctred.c deleted file mode 100644 index efda35a..0000000 --- a/Jpeg/jidctred.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * jidctred.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains inverse-DCT routines that produce reduced-size output: - * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block. - * - * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M) - * algorithm used in jidctint.c. We simply replace each 8-to-8 1-D IDCT step - * with an 8-to-4 step that produces the four averages of two adjacent outputs - * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output). - * These steps were derived by computing the corresponding values at the end - * of the normal LL&M code, then simplifying as much as possible. - * - * 1x1 is trivial: just take the DC coefficient divided by 8. - * - * See jidctint.c for additional comments. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef IDCT_SCALING_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling is the same as in jidctint.c. */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_211164243 ((JPEG_INT32) 1730) /* FIX(0.211164243) */ -#define FIX_0_509795579 ((JPEG_INT32) 4176) /* FIX(0.509795579) */ -#define FIX_0_601344887 ((JPEG_INT32) 4926) /* FIX(0.601344887) */ -#define FIX_0_720959822 ((JPEG_INT32) 5906) /* FIX(0.720959822) */ -#define FIX_0_765366865 ((JPEG_INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_850430095 ((JPEG_INT32) 6967) /* FIX(0.850430095) */ -#define FIX_0_899976223 ((JPEG_INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_061594337 ((JPEG_INT32) 8697) /* FIX(1.061594337) */ -#define FIX_1_272758580 ((JPEG_INT32) 10426) /* FIX(1.272758580) */ -#define FIX_1_451774981 ((JPEG_INT32) 11893) /* FIX(1.451774981) */ -#define FIX_1_847759065 ((JPEG_INT32) 15137) /* FIX(1.847759065) */ -#define FIX_2_172734803 ((JPEG_INT32) 17799) /* FIX(2.172734803) */ -#define FIX_2_562915447 ((JPEG_INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_624509785 ((JPEG_INT32) 29692) /* FIX(3.624509785) */ -#else -#define FIX_0_211164243 FIX(0.211164243) -#define FIX_0_509795579 FIX(0.509795579) -#define FIX_0_601344887 FIX(0.601344887) -#define FIX_0_720959822 FIX(0.720959822) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_850430095 FIX(0.850430095) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_061594337 FIX(1.061594337) -#define FIX_1_272758580 FIX(1.272758580) -#define FIX_1_451774981 FIX(1.451774981) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_2_172734803 FIX(2.172734803) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_624509785 FIX(3.624509785) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 4x4 output block. - */ - -GLOBAL(void) -jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - JPEG_INT32 tmp0, tmp2, tmp10, tmp12; - JPEG_INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE*4]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { - /* Don't bother to process column 4, because second pass won't use it */ - if (ctr == DCTSIZE-4) - continue; - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 && - inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) { - /* AC terms all zero; we need not examine term 4 for 4x4 output */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= (CONST_BITS+1); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ - + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ - + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ - + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ - - tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ - + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ - + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ - + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ - - /* Final output stage */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1); - } - - /* Pass 2: process 4 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++) { - outptr = output_buf[ctr] + output_col; - /* It's not clear whether a zero row test is worthwhile here ... */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((JPEG_INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp0 = ((JPEG_INT32) wsptr[0]) << (CONST_BITS+1); - - tmp2 = MULTIPLY((JPEG_INT32) wsptr[2], FIX_1_847759065) - + MULTIPLY((JPEG_INT32) wsptr[6], - FIX_0_765366865); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - /* Odd part */ - - z1 = (JPEG_INT32) wsptr[7]; - z2 = (JPEG_INT32) wsptr[5]; - z3 = (JPEG_INT32) wsptr[3]; - z4 = (JPEG_INT32) wsptr[1]; - - tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ - + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ - + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ - + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ - - tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ - + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ - + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ - + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 2x2 output block. - */ - -GLOBAL(void) -jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - JPEG_INT32 tmp0, tmp10, z1; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE*2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { - /* Don't bother to process columns 2,4,6 */ - if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6) - continue; - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) { - /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - - continue; - } - - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp10 = z1 << (CONST_BITS+2); - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ - - /* Final output stage */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2); - } - - /* Pass 2: process 2 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 2; ctr++) { - outptr = output_buf[ctr] + output_col; - /* It's not clear whether a zero row test is worthwhile here ... */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((JPEG_INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp10 = ((JPEG_INT32) wsptr[0]) << (CONST_BITS+2); - - /* Odd part */ - - tmp0 = MULTIPLY((JPEG_INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */ - + MULTIPLY((JPEG_INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */ - + MULTIPLY((JPEG_INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */ - + MULTIPLY((JPEG_INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3+2) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3+2) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 1x1 output block. - */ - -GLOBAL(void) -jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - int dcval; - ISLOW_MULT_TYPE * quantptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* We hardly need an inverse DCT routine for this: just take the - * average pixel value, which is one-eighth of the DC coefficient. - */ - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - dcval = DEQUANTIZE(coef_block[0], quantptr[0]); - dcval = (int) DESCALE((JPEG_INT32) dcval, 3); - - output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; -} - -#endif /* IDCT_SCALING_SUPPORTED */ diff --git a/Jpeg/jpeg.dsp b/Jpeg/jpeg.dsp deleted file mode 100644 index 6bed87d..0000000 --- a/Jpeg/jpeg.dsp +++ /dev/null @@ -1,872 +0,0 @@ -# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Static Library" 0x0104 - -CFG=jpeg - Win32 Debug -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "JpegVC.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "JpegVC.mak" CFG="jpeg - Win32 Debug" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "jpeg - Win32 Release" (based on "Win32 (x86) Static Library") -!MESSAGE "jpeg - Win32 Debug" (based on "Win32 (x86) Static Library") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Release" -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c -# ADD CPP /nologo /MD /W1 /O1 /Ob2 /I "../include" /D "WIN32" /D "_WINDOWS" /D "__WINDOWS__" /D "__WXMSW__" /D "__WIN95__" /D "__WIN32__" /D WINVER=0x0400 /D "STRICT" /Yu"wx/wxprec.h" /FD /c -# ADD BASE RSC /l 0x809 -# ADD RSC /l 0x809 -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LIB32=link.exe -lib -# ADD BASE LIB32 /nologo -# ADD LIB32 /nologo /out:"..\..\lib\jpeg.lib" - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "Debug" -# PROP BASE Intermediate_Dir "Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "Debug" -# PROP Intermediate_Dir "Debug" -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c -# ADD CPP /nologo /MDd /W1 /Zi /Od /I "../include" /I ".." /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "__WINDOWS__" /D "__WXMSW__" /D DEBUG=1 /D "__WXDEBUG__" /D "__WIN95__" /D "__WIN32__" /D WINVER=0x0400 /D "STRICT" /Yu"wx/wxprec.h" /FD /c -# ADD BASE RSC /l 0x809 -# ADD RSC /l 0x809 -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LIB32=link.exe -lib -# ADD BASE LIB32 /nologo -# ADD LIB32 /nologo /out:"..\..\lib\jpegd.lib" - -!ENDIF - -# Begin Target - -# Name "jpeg - Win32 Release" -# Name "jpeg - Win32 Debug" -# Begin Group "JPEG Files" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\jcapimin.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcapistd.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jccoefct.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jccolor.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcdctmgr.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jchuff.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcinit.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcmainct.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcmarker.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcmaster.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcomapi.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcparam.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcphuff.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcprepct.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jcsample.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jctrans.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdapimin.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdapistd.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdatadst.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdatasrc.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdcoefct.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdcolor.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jddctmgr.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdhuff.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdinput.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdmainct.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdmarker.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdmaster.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdmerge.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdphuff.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdpostct.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdsample.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jdtrans.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jerror.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jfdctflt.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jfdctfst.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jfdctint.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jidctflt.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jidctfst.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jidctint.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jidctred.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jmemmgr.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jmemnobs.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jquant1.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jquant2.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\jutils.c - -!IF "$(CFG)" == "jpeg - Win32 Release" - -# ADD CPP /I ".." -# SUBTRACT CPP /YX /Yc /Yu - -!ELSEIF "$(CFG)" == "jpeg - Win32 Debug" - -# SUBTRACT CPP /YX /Yc /Yu - -!ENDIF - -# End Source File -# End Group -# Begin Group "Header Files" - -# PROP Default_Filter "h" -# Begin Source File - -SOURCE=.\jchuff.h -# End Source File -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jdct.h -# End Source File -# Begin Source File - -SOURCE=.\jdhuff.h -# End Source File -# Begin Source File - -SOURCE=.\jerror.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# Begin Source File - -SOURCE=.\jmemsys.h -# End Source File -# Begin Source File - -SOURCE=.\jmorecfg.h -# End Source File -# Begin Source File - -SOURCE=.\jpegint.h -# End Source File -# Begin Source File - -SOURCE=.\jpeglib.h -# End Source File -# Begin Source File - -SOURCE=.\jversion.h -# End Source File -# End Group -# End Target -# End Project diff --git a/Jpeg/jpeg_CW_Prefix.h b/Jpeg/jpeg_CW_Prefix.h deleted file mode 100644 index 92afda8..0000000 --- a/Jpeg/jpeg_CW_Prefix.h +++ /dev/null @@ -1,6 +0,0 @@ -// Special configuration file for building jpeg under CodeWarrior - - -//#define HAVE_BOOLEAN - - diff --git a/Jpeg/makefile.unx b/Jpeg/makefile.unx deleted file mode 100644 index bcf905e..0000000 --- a/Jpeg/makefile.unx +++ /dev/null @@ -1,36 +0,0 @@ -# -# File: makefile.unx -# Author: Julian Smart -# Created: 1999 -# Updated: -# Copyright: (c) 1999 -# -# -# Makefile for OGL library, Unix - -include ../make.env - -JPEGLIB=$(WXDIR)/lib/libjpeg$(GUISUFFIX).a - -all: $(JPEGLIB) - -# Define library objects -OBJECTS=\ - jcomapi.o jutils.o jerror.o jmemmgr.o jmemnobs.o \ - jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o \ - jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ - jccoefct.o jccolor.o jcsample.o jchuff.o jcphuff.o \ - jcdctmgr.o jfdctfst.o jfdctflt.o jfdctint.o \ - jdapimin.o jdapistd.o jdtrans.o jdatasrc.o \ - jdmaster.o jdinput.o jdmarker.o jdhuff.o jdphuff.o \ - jdmainct.o jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o \ - jidctflt.o jidctint.o jidctred.o jdsample.o jdcolor.o \ - jquant1.o jquant2.o jdmerge.o - -$(JPEGLIB) : $(OBJECTS) - ar $(AROPTIONS) $@ $(OBJECTS) - $(RANLIB) $@ - -clean: - rm -f $(OBJECTS) $(JPEGLIB) - diff --git a/Jpeg/makefile.vc b/Jpeg/makefile.vc deleted file mode 100644 index af92dd5..0000000 --- a/Jpeg/makefile.vc +++ /dev/null @@ -1,201 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Microsoft Visual C++ on Windows NT (and 95?). -# It builds the IJG library as a statically linkable library (.LIB), -# and builds the sample applications as console-mode apps. -# Thanks to Xingong Chang, Raymond Everly and others. - -# Read installation instructions before saying "nmake" !! -# To build an optimized library without debug info, say "nmake nodebug=1". - -# Put here the object file name for the correct system-dependent memory -# manager file. For NT we suggest jmemnobs.obj, which expects the OS to -# provide adequate virtual memory. -SYSDEPMEM= $D\jmemnobs.obj - -# miscellaneous OS-dependent stuff -# file deletion command -!if "$(RM)" == "" -RM= erase -!endif - -# End of configurable options. - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c \ - jcapistd.c \ - jccoefct.c \ - jccolor.c \ - jcdctmgr.c \ - jchuff.c \ - jcinit.c \ - jcmainct.c \ - jcmarker.c \ - jcmaster.c \ - jcomapi.c \ - jcparam.c \ - jcphuff.c \ - jcprepct.c \ - jcsample.c \ - jctrans.c \ - jdapimin.c \ - jdapistd.c \ - jdatadst.c \ - jdatasrc.c \ - jdcoefct.c \ - jdcolor.c \ - jddctmgr.c \ - jdhuff.c \ - jdinput.c \ - jdmainct.c \ - jdmarker.c \ - jdmaster.c \ - jdmerge.c \ - jdphuff.c \ - jdpostct.c \ - jdsample.c \ - jdtrans.c \ - jerror.c \ - jfdctflt.c \ - jfdctfst.c \ - jfdctint.c \ - jidctflt.c \ - jidctfst.c \ - jidctint.c \ - jidctred.c \ - jquant1.c \ - jquant2.c \ - jutils.c \ - jmemmgr.c - -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c - -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c - -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) - -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h - -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log - -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt - -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms - -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) - -# library object files common to compression and decompression -COMOBJECTS= $D\jcomapi.obj $D\jutils.obj $D\jerror.obj $D\jmemmgr.obj $(SYSDEPMEM) - -# compression library object files -CLIBOBJECTS= $D\jcapimin.obj \ - $D\jcapistd.obj \ - $D\jctrans.obj \ - $D\jcparam.obj \ - $D\jdatadst.obj \ - $D\jcinit.obj \ - $D\jcmaster.obj \ - $D\jcmarker.obj \ - $D\jcmainct.obj \ - $D\jcprepct.obj \ - $D\jccoefct.obj \ - $D\jccolor.obj \ - $D\jcsample.obj \ - $D\jchuff.obj \ - $D\jcphuff.obj \ - $D\jcdctmgr.obj \ - $D\jfdctfst.obj \ - $D\jfdctflt.obj \ - $D\jfdctint.obj - -# decompression library object files -DLIBOBJECTS= $D\jdapimin.obj \ - $D\jdapistd.obj \ - $D\jdtrans.obj \ - $D\jdatasrc.obj \ - $D\jdmaster.obj \ - $D\jdinput.obj \ - $D\jdmarker.obj \ - $D\jdhuff.obj \ - $D\jdphuff.obj \ - $D\jdmainct.obj \ - $D\jdcoefct.obj \ - $D\jdpostct.obj \ - $D\jddctmgr.obj \ - $D\jidctfst.obj \ - $D\jidctflt.obj \ - $D\jidctint.obj \ - $D\jidctred.obj \ - $D\jdsample.obj \ - $D\jdcolor.obj \ - $D\jquant1.obj \ - $D\jquant2.obj \ - $D\jdmerge.obj -# These objectfiles are included in libjpeg.lib -OBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) - -# object files for sample applications (excluding library files) -COBJECTS= $D\cjpeg.obj \ - $D\rdppm.obj \ - $D\rdgif.obj \ - $D\rdtarga.obj \ - $D\rdrle.obj \ - $D\rdbmp.obj \ - $D\rdswitch.obj \ - $D\cdjpeg.obj - -DOBJECTS= $D\djpeg.obj \ - $D\wrppm.obj \ - $D\wrgif.obj \ - $D\wrtarga.obj \ - $D\wrrle.obj \ - $D\wrbmp.obj \ - $D\rdcolmap.obj \ - $D\cdjpeg.obj - -TROBJECTS= $D\jpegtran.obj \ - $D\rdswitch.obj \ - $D\cdjpeg.obj \ - $D\transupp.obj - -!if "$(FINAL)" == "1" -LIBTARGET=..\..\lib\jpeg.lib -!else if "$(FINAL)" == "hybrid" -LIBTARGET=..\..\lib\jpegh.lib -!else -LIBTARGET=..\..\lib\jpegd.lib -!endif - -# Note: we have to put this first, to override the default definition -# which doesn't work because there are too many files on the command line. -# This means that we must explicitly use the 'all' target when making -# jpeg.lib, because of the ordering of targets. - -defaulttarget: - echo Please use the 'all' target for this makefile. - - -# Pull in standard variable definitions - -!include ..\makelib.vc - diff --git a/OnlineSamples.sln b/OnlineSamples.sln index f82f92b..7cdc400 100644 --- a/OnlineSamples.sln +++ b/OnlineSamples.sln @@ -7,32 +7,44 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "MotorOnOffSwitch", "MotorOn EndProject Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Camera", "Camera\Camera.vcxproj", "{AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}" EndProject -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Jpeg", "Jpeg\Jpeg.vcxproj", "{30D20558-4191-42F9-8833-3313840DCF49}" -EndProject Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TestProj02", "TestProj02\TestProj02.vcxproj", "{A8640603-21DE-48DF-B3C0-633ED02F0F72}" EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg-9d", "jpeg-9d\jpeg-9d.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}" +EndProject Global GlobalSection(SolutionConfigurationPlatforms) = preSolution Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 Release|Win32 = Release|Win32 + Release|x64 = Release|x64 EndGlobalSection GlobalSection(ProjectConfigurationPlatforms) = postSolution {01F7944D-74EC-4089-A648-8D247CF692B8}.Debug|Win32.ActiveCfg = Debug|Win32 {01F7944D-74EC-4089-A648-8D247CF692B8}.Debug|Win32.Build.0 = Debug|Win32 + {01F7944D-74EC-4089-A648-8D247CF692B8}.Debug|x64.ActiveCfg = Debug|Win32 {01F7944D-74EC-4089-A648-8D247CF692B8}.Release|Win32.ActiveCfg = Release|Win32 {01F7944D-74EC-4089-A648-8D247CF692B8}.Release|Win32.Build.0 = Release|Win32 + {01F7944D-74EC-4089-A648-8D247CF692B8}.Release|x64.ActiveCfg = Release|Win32 {AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}.Debug|Win32.ActiveCfg = Debug|Win32 {AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}.Debug|Win32.Build.0 = Debug|Win32 + {AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}.Debug|x64.ActiveCfg = Debug|Win32 {AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}.Release|Win32.ActiveCfg = Release|Win32 {AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}.Release|Win32.Build.0 = Release|Win32 - {30D20558-4191-42F9-8833-3313840DCF49}.Debug|Win32.ActiveCfg = Debug|Win32 - {30D20558-4191-42F9-8833-3313840DCF49}.Debug|Win32.Build.0 = Debug|Win32 - {30D20558-4191-42F9-8833-3313840DCF49}.Release|Win32.ActiveCfg = Release|Win32 - {30D20558-4191-42F9-8833-3313840DCF49}.Release|Win32.Build.0 = Release|Win32 + {AAA32E4C-0C85-48B2-BAC0-826A0B37EBFF}.Release|x64.ActiveCfg = Release|Win32 {A8640603-21DE-48DF-B3C0-633ED02F0F72}.Debug|Win32.ActiveCfg = Debug|Win32 {A8640603-21DE-48DF-B3C0-633ED02F0F72}.Debug|Win32.Build.0 = Debug|Win32 + {A8640603-21DE-48DF-B3C0-633ED02F0F72}.Debug|x64.ActiveCfg = Debug|Win32 {A8640603-21DE-48DF-B3C0-633ED02F0F72}.Release|Win32.ActiveCfg = Release|Win32 {A8640603-21DE-48DF-B3C0-633ED02F0F72}.Release|Win32.Build.0 = Release|Win32 + {A8640603-21DE-48DF-B3C0-633ED02F0F72}.Release|x64.ActiveCfg = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Debug|Win32.ActiveCfg = Debug|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Debug|Win32.Build.0 = Debug|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Debug|x64.ActiveCfg = Debug|x64 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Debug|x64.Build.0 = Debug|x64 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|x64.ActiveCfg = Release|x64 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|x64.Build.0 = Release|x64 EndGlobalSection GlobalSection(SolutionProperties) = preSolution HideSolutionNode = FALSE diff --git a/README.md b/README.md index d1d9c87..2e0b743 100644 --- a/README.md +++ b/README.md @@ -64,8 +64,14 @@ For you as end-user there is no need to fully understand the contend of these cl #### ## History +### 2020-06-27 [CvL] +This is a **beta version** for RoboPro 4.6.6/4.7.0 pre-release: +**TXT-C-Programming-Kit-4-6-6_beta-03** + +>jpeg library from version 6d (27-Mar-1998) to [version 9d (2-Jan-2020)](http://ijg.org/) + ### 2020-06-24 [CvL] -This is a **draft version** for RoboPro 4.6.6: +This is a **beta version** for RoboPro 4.6.6/4.7.0 pre-release: **TXT-C-Programming-Kit-4-6-6_beta-02** Tested with firmware 4.6.6 and on MS-Windows 10 (64 bits) diff --git a/jpeg-9d/Makefile.am b/jpeg-9d/Makefile.am new file mode 100644 index 0000000..c477a44 --- /dev/null +++ b/jpeg-9d/Makefile.am @@ -0,0 +1,140 @@ +## Process this file with automake to produce Makefile.in +# +# Automake Makefile for the JPEG library +# +# This file is written by Bob Friesenhahn, Guido Vollbeding +# + +# Sources to build library +LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c + +# System dependent sources +SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c + +# Headers which are installed to support the library +INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h + +# Headers which are not installed +OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ + jversion.h transupp.h + +# Manual pages (Automake uses 'MANS' for itself) +DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 + +# Other documentation files +DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \ + structure.txt coderules.txt filelist.txt change.log + +# Makefiles for various systems +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt + +# Configuration files +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms + +# Support scripts for configure +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib + +# Miscellaneous support files +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in + +# Test support files +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg + +# libtool libraries to build +lib_LTLIBRARIES = libjpeg.la + +# Library sources for libjpeg.la +libjpeg_la_SOURCES = $(LIBSOURCES) + +# LDFLAGS for libjpeg.la +libjpeg_la_LDFLAGS = -no-undefined \ + -version-info $(JPEG_LIB_VERSION) + +if HAVE_LD_VERSION_SCRIPT + libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map +endif + +# Executables to build +bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +# Executable sources & libs +cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ + rdswitch.c cdjpeg.c +cjpeg_LDADD = libjpeg.la +djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ + rdcolmap.c cdjpeg.c +djpeg_LDADD = libjpeg.la +jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c +jpegtran_LDADD = libjpeg.la +rdjpgcom_SOURCES = rdjpgcom.c +wrjpgcom_SOURCES = wrjpgcom.c + +# Manual pages to install +man_MANS = $(DISTMANS) + +# Headers to install +include_HEADERS = $(INSTINCLUDES) + +# Other distributed headers +noinst_HEADERS = $(OTHERINCLUDES) + +# Other distributed files +EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ + $(OTHERFILES) $(TESTFILES) + +# pkg-config file +pkgconfigdir = $(libdir)/pkgconfig +nodist_pkgconfig_DATA = libjpeg.pc + +# Files to be cleaned +CLEANFILES = testout.ppm testout.gif testout.bmp testout.jpg testoutp.ppm \ + testoutp.jpg testoutt.jpg + +# Install jconfig.h +install-data-local: + $(mkinstalldirs) $(DESTDIR)$(includedir) + $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h + +# Uninstall jconfig.h +uninstall-local: + rm -f $(DESTDIR)$(includedir)/jconfig.h + +# Run tests +test: check-local +check-local: + rm -f testout* + ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg + ./djpeg -dct int -gif -outfile testout.gif $(srcdir)/testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg + ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm + ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg + cmp $(srcdir)/testimg.ppm testout.ppm + cmp $(srcdir)/testimg.gif testout.gif + cmp $(srcdir)/testimg.bmp testout.bmp + cmp $(srcdir)/testimg.jpg testout.jpg + cmp $(srcdir)/testimg.ppm testoutp.ppm + cmp $(srcdir)/testimgp.jpg testoutp.jpg + cmp $(srcdir)/testorig.jpg testoutt.jpg diff --git a/jpeg-9d/Makefile.in b/jpeg-9d/Makefile.in new file mode 100644 index 0000000..ab8e384 --- /dev/null +++ b/jpeg-9d/Makefile.in @@ -0,0 +1,1244 @@ +# Makefile.in generated by automake 1.16.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Automake Makefile for the JPEG library +# +# This file is written by Bob Friesenhahn, Guido Vollbeding +# + + + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libjpeg.map +bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \ + rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT) +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(include_HEADERS) $(noinst_HEADERS) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = jconfig.h +CONFIG_CLEAN_FILES = libjpeg.pc +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" \ + "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \ + "$(DESTDIR)$(includedir)" +PROGRAMS = $(bin_PROGRAMS) +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +LTLIBRARIES = $(lib_LTLIBRARIES) +libjpeg_la_LIBADD = +am__objects_1 = jaricom.lo jcapimin.lo jcapistd.lo jcarith.lo \ + jccoefct.lo jccolor.lo jcdctmgr.lo jchuff.lo jcinit.lo \ + jcmainct.lo jcmarker.lo jcmaster.lo jcomapi.lo jcparam.lo \ + jcprepct.lo jcsample.lo jctrans.lo jdapimin.lo jdapistd.lo \ + jdarith.lo jdatadst.lo jdatasrc.lo jdcoefct.lo jdcolor.lo \ + jddctmgr.lo jdhuff.lo jdinput.lo jdmainct.lo jdmarker.lo \ + jdmaster.lo jdmerge.lo jdpostct.lo jdsample.lo jdtrans.lo \ + jerror.lo jfdctflt.lo jfdctfst.lo jfdctint.lo jidctflt.lo \ + jidctfst.lo jidctint.lo jquant1.lo jquant2.lo jutils.lo \ + jmemmgr.lo @MEMORYMGR@.lo +am_libjpeg_la_OBJECTS = $(am__objects_1) +libjpeg_la_OBJECTS = $(am_libjpeg_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libjpeg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libjpeg_la_LDFLAGS) $(LDFLAGS) -o $@ +am_cjpeg_OBJECTS = cjpeg.$(OBJEXT) rdppm.$(OBJEXT) rdgif.$(OBJEXT) \ + rdtarga.$(OBJEXT) rdrle.$(OBJEXT) rdbmp.$(OBJEXT) \ + rdswitch.$(OBJEXT) cdjpeg.$(OBJEXT) +cjpeg_OBJECTS = $(am_cjpeg_OBJECTS) +cjpeg_DEPENDENCIES = libjpeg.la +am_djpeg_OBJECTS = djpeg.$(OBJEXT) wrppm.$(OBJEXT) wrgif.$(OBJEXT) \ + wrtarga.$(OBJEXT) wrrle.$(OBJEXT) wrbmp.$(OBJEXT) \ + rdcolmap.$(OBJEXT) cdjpeg.$(OBJEXT) +djpeg_OBJECTS = $(am_djpeg_OBJECTS) +djpeg_DEPENDENCIES = libjpeg.la +am_jpegtran_OBJECTS = jpegtran.$(OBJEXT) rdswitch.$(OBJEXT) \ + cdjpeg.$(OBJEXT) transupp.$(OBJEXT) +jpegtran_OBJECTS = $(am_jpegtran_OBJECTS) +jpegtran_DEPENDENCIES = libjpeg.la +am_rdjpgcom_OBJECTS = rdjpgcom.$(OBJEXT) +rdjpgcom_OBJECTS = $(am_rdjpgcom_OBJECTS) +rdjpgcom_LDADD = $(LDADD) +am_wrjpgcom_OBJECTS = wrjpgcom.$(OBJEXT) +wrjpgcom_OBJECTS = $(am_wrjpgcom_OBJECTS) +wrjpgcom_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/@MEMORYMGR@.Plo \ + ./$(DEPDIR)/cdjpeg.Po ./$(DEPDIR)/cjpeg.Po \ + ./$(DEPDIR)/djpeg.Po ./$(DEPDIR)/jaricom.Plo \ + ./$(DEPDIR)/jcapimin.Plo ./$(DEPDIR)/jcapistd.Plo \ + ./$(DEPDIR)/jcarith.Plo ./$(DEPDIR)/jccoefct.Plo \ + ./$(DEPDIR)/jccolor.Plo ./$(DEPDIR)/jcdctmgr.Plo \ + ./$(DEPDIR)/jchuff.Plo ./$(DEPDIR)/jcinit.Plo \ + ./$(DEPDIR)/jcmainct.Plo ./$(DEPDIR)/jcmarker.Plo \ + ./$(DEPDIR)/jcmaster.Plo ./$(DEPDIR)/jcomapi.Plo \ + ./$(DEPDIR)/jcparam.Plo ./$(DEPDIR)/jcprepct.Plo \ + ./$(DEPDIR)/jcsample.Plo ./$(DEPDIR)/jctrans.Plo \ + ./$(DEPDIR)/jdapimin.Plo ./$(DEPDIR)/jdapistd.Plo \ + ./$(DEPDIR)/jdarith.Plo ./$(DEPDIR)/jdatadst.Plo \ + ./$(DEPDIR)/jdatasrc.Plo ./$(DEPDIR)/jdcoefct.Plo \ + ./$(DEPDIR)/jdcolor.Plo ./$(DEPDIR)/jddctmgr.Plo \ + ./$(DEPDIR)/jdhuff.Plo ./$(DEPDIR)/jdinput.Plo \ + ./$(DEPDIR)/jdmainct.Plo ./$(DEPDIR)/jdmarker.Plo \ + ./$(DEPDIR)/jdmaster.Plo ./$(DEPDIR)/jdmerge.Plo \ + ./$(DEPDIR)/jdpostct.Plo ./$(DEPDIR)/jdsample.Plo \ + ./$(DEPDIR)/jdtrans.Plo ./$(DEPDIR)/jerror.Plo \ + ./$(DEPDIR)/jfdctflt.Plo ./$(DEPDIR)/jfdctfst.Plo \ + ./$(DEPDIR)/jfdctint.Plo ./$(DEPDIR)/jidctflt.Plo \ + ./$(DEPDIR)/jidctfst.Plo ./$(DEPDIR)/jidctint.Plo \ + ./$(DEPDIR)/jmemmgr.Plo ./$(DEPDIR)/jpegtran.Po \ + ./$(DEPDIR)/jquant1.Plo ./$(DEPDIR)/jquant2.Plo \ + ./$(DEPDIR)/jutils.Plo ./$(DEPDIR)/rdbmp.Po \ + ./$(DEPDIR)/rdcolmap.Po ./$(DEPDIR)/rdgif.Po \ + ./$(DEPDIR)/rdjpgcom.Po ./$(DEPDIR)/rdppm.Po \ + ./$(DEPDIR)/rdrle.Po ./$(DEPDIR)/rdswitch.Po \ + ./$(DEPDIR)/rdtarga.Po ./$(DEPDIR)/transupp.Po \ + ./$(DEPDIR)/wrbmp.Po ./$(DEPDIR)/wrgif.Po \ + ./$(DEPDIR)/wrjpgcom.Po ./$(DEPDIR)/wrppm.Po \ + ./$(DEPDIR)/wrrle.Po ./$(DEPDIR)/wrtarga.Po +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libjpeg_la_SOURCES) $(cjpeg_SOURCES) $(djpeg_SOURCES) \ + $(jpegtran_SOURCES) $(rdjpgcom_SOURCES) $(wrjpgcom_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) +DATA = $(nodist_pkgconfig_DATA) +HEADERS = $(include_HEADERS) $(noinst_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)jconfig.cfg +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LIB_VERSION = @JPEG_LIB_VERSION@ +JPEG_LIB_VERSION_MAJOR = @JPEG_LIB_VERSION_MAJOR@ +JPEG_LIB_VERSION_MINOR = @JPEG_LIB_VERSION_MINOR@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MEMORYMGR = @MEMORYMGR@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Sources to build library +LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c + + +# System dependent sources +SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c + +# Headers which are installed to support the library +INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h + +# Headers which are not installed +OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ + jversion.h transupp.h + + +# Manual pages (Automake uses 'MANS' for itself) +DISTMANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 + +# Other documentation files +DOCS = README install.txt usage.txt wizard.txt example.c libjpeg.txt \ + structure.txt coderules.txt filelist.txt change.log + + +# Makefiles for various systems +MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt + + +# Configuration files +CONFIGFILES = jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms + + +# Support scripts for configure +CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib + + +# Miscellaneous support files +OTHERFILES = jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in + +# Test support files +TESTFILES = testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg + + +# libtool libraries to build +lib_LTLIBRARIES = libjpeg.la + +# Library sources for libjpeg.la +libjpeg_la_SOURCES = $(LIBSOURCES) + +# LDFLAGS for libjpeg.la +libjpeg_la_LDFLAGS = -no-undefined -version-info $(JPEG_LIB_VERSION) \ + $(am__append_1) + +# Executable sources & libs +cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ + rdswitch.c cdjpeg.c + +cjpeg_LDADD = libjpeg.la +djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ + rdcolmap.c cdjpeg.c + +djpeg_LDADD = libjpeg.la +jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c +jpegtran_LDADD = libjpeg.la +rdjpgcom_SOURCES = rdjpgcom.c +wrjpgcom_SOURCES = wrjpgcom.c + +# Manual pages to install +man_MANS = $(DISTMANS) + +# Headers to install +include_HEADERS = $(INSTINCLUDES) + +# Other distributed headers +noinst_HEADERS = $(OTHERINCLUDES) + +# Other distributed files +EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ + $(OTHERFILES) $(TESTFILES) + + +# pkg-config file +pkgconfigdir = $(libdir)/pkgconfig +nodist_pkgconfig_DATA = libjpeg.pc + +# Files to be cleaned +CLEANFILES = testout.ppm testout.gif testout.bmp testout.jpg testoutp.ppm \ + testoutp.jpg testoutt.jpg + +all: jconfig.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +jconfig.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/jconfig.cfg $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status jconfig.h +$(srcdir)/jconfig.cfg: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f jconfig.h stamp-h1 +libjpeg.pc: $(top_builddir)/config.status $(srcdir)/libjpeg.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } + +libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) $(EXTRA_libjpeg_la_DEPENDENCIES) + $(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS) + +cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) $(EXTRA_cjpeg_DEPENDENCIES) + @rm -f cjpeg$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS) + +djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) $(EXTRA_djpeg_DEPENDENCIES) + @rm -f djpeg$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS) + +jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) $(EXTRA_jpegtran_DEPENDENCIES) + @rm -f jpegtran$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS) + +rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) $(EXTRA_rdjpgcom_DEPENDENCIES) + @rm -f rdjpgcom$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS) + +wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) $(EXTRA_wrjpgcom_DEPENDENCIES) + @rm -f wrjpgcom$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) +install-nodist_pkgconfigDATA: $(nodist_pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(nodist_pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-nodist_pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(nodist_pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-local +check: check-am +all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(MANS) $(DATA) $(HEADERS) \ + jconfig.h +install-binPROGRAMS: install-libLTLIBRARIES + +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f ./$(DEPDIR)/@MEMORYMGR@.Plo + -rm -f ./$(DEPDIR)/cdjpeg.Po + -rm -f ./$(DEPDIR)/cjpeg.Po + -rm -f ./$(DEPDIR)/djpeg.Po + -rm -f ./$(DEPDIR)/jaricom.Plo + -rm -f ./$(DEPDIR)/jcapimin.Plo + -rm -f ./$(DEPDIR)/jcapistd.Plo + -rm -f ./$(DEPDIR)/jcarith.Plo + -rm -f ./$(DEPDIR)/jccoefct.Plo + -rm -f ./$(DEPDIR)/jccolor.Plo + -rm -f ./$(DEPDIR)/jcdctmgr.Plo + -rm -f ./$(DEPDIR)/jchuff.Plo + -rm -f ./$(DEPDIR)/jcinit.Plo + -rm -f ./$(DEPDIR)/jcmainct.Plo + -rm -f ./$(DEPDIR)/jcmarker.Plo + -rm -f ./$(DEPDIR)/jcmaster.Plo + -rm -f ./$(DEPDIR)/jcomapi.Plo + -rm -f ./$(DEPDIR)/jcparam.Plo + -rm -f ./$(DEPDIR)/jcprepct.Plo + -rm -f ./$(DEPDIR)/jcsample.Plo + -rm -f ./$(DEPDIR)/jctrans.Plo + -rm -f ./$(DEPDIR)/jdapimin.Plo + -rm -f ./$(DEPDIR)/jdapistd.Plo + -rm -f ./$(DEPDIR)/jdarith.Plo + -rm -f ./$(DEPDIR)/jdatadst.Plo + -rm -f ./$(DEPDIR)/jdatasrc.Plo + -rm -f ./$(DEPDIR)/jdcoefct.Plo + -rm -f ./$(DEPDIR)/jdcolor.Plo + -rm -f ./$(DEPDIR)/jddctmgr.Plo + -rm -f ./$(DEPDIR)/jdhuff.Plo + -rm -f ./$(DEPDIR)/jdinput.Plo + -rm -f ./$(DEPDIR)/jdmainct.Plo + -rm -f ./$(DEPDIR)/jdmarker.Plo + -rm -f ./$(DEPDIR)/jdmaster.Plo + -rm -f ./$(DEPDIR)/jdmerge.Plo + -rm -f ./$(DEPDIR)/jdpostct.Plo + -rm -f ./$(DEPDIR)/jdsample.Plo + -rm -f ./$(DEPDIR)/jdtrans.Plo + -rm -f ./$(DEPDIR)/jerror.Plo + -rm -f ./$(DEPDIR)/jfdctflt.Plo + -rm -f ./$(DEPDIR)/jfdctfst.Plo + -rm -f ./$(DEPDIR)/jfdctint.Plo + -rm -f ./$(DEPDIR)/jidctflt.Plo + -rm -f ./$(DEPDIR)/jidctfst.Plo + -rm -f ./$(DEPDIR)/jidctint.Plo + -rm -f ./$(DEPDIR)/jmemmgr.Plo + -rm -f ./$(DEPDIR)/jpegtran.Po + -rm -f ./$(DEPDIR)/jquant1.Plo + -rm -f ./$(DEPDIR)/jquant2.Plo + -rm -f ./$(DEPDIR)/jutils.Plo + -rm -f ./$(DEPDIR)/rdbmp.Po + -rm -f ./$(DEPDIR)/rdcolmap.Po + -rm -f ./$(DEPDIR)/rdgif.Po + -rm -f ./$(DEPDIR)/rdjpgcom.Po + -rm -f ./$(DEPDIR)/rdppm.Po + -rm -f ./$(DEPDIR)/rdrle.Po + -rm -f ./$(DEPDIR)/rdswitch.Po + -rm -f ./$(DEPDIR)/rdtarga.Po + -rm -f ./$(DEPDIR)/transupp.Po + -rm -f ./$(DEPDIR)/wrbmp.Po + -rm -f ./$(DEPDIR)/wrgif.Po + -rm -f ./$(DEPDIR)/wrjpgcom.Po + -rm -f ./$(DEPDIR)/wrppm.Po + -rm -f ./$(DEPDIR)/wrrle.Po + -rm -f ./$(DEPDIR)/wrtarga.Po + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-data-local install-includeHEADERS install-man \ + install-nodist_pkgconfigDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f ./$(DEPDIR)/@MEMORYMGR@.Plo + -rm -f ./$(DEPDIR)/cdjpeg.Po + -rm -f ./$(DEPDIR)/cjpeg.Po + -rm -f ./$(DEPDIR)/djpeg.Po + -rm -f ./$(DEPDIR)/jaricom.Plo + -rm -f ./$(DEPDIR)/jcapimin.Plo + -rm -f ./$(DEPDIR)/jcapistd.Plo + -rm -f ./$(DEPDIR)/jcarith.Plo + -rm -f ./$(DEPDIR)/jccoefct.Plo + -rm -f ./$(DEPDIR)/jccolor.Plo + -rm -f ./$(DEPDIR)/jcdctmgr.Plo + -rm -f ./$(DEPDIR)/jchuff.Plo + -rm -f ./$(DEPDIR)/jcinit.Plo + -rm -f ./$(DEPDIR)/jcmainct.Plo + -rm -f ./$(DEPDIR)/jcmarker.Plo + -rm -f ./$(DEPDIR)/jcmaster.Plo + -rm -f ./$(DEPDIR)/jcomapi.Plo + -rm -f ./$(DEPDIR)/jcparam.Plo + -rm -f ./$(DEPDIR)/jcprepct.Plo + -rm -f ./$(DEPDIR)/jcsample.Plo + -rm -f ./$(DEPDIR)/jctrans.Plo + -rm -f ./$(DEPDIR)/jdapimin.Plo + -rm -f ./$(DEPDIR)/jdapistd.Plo + -rm -f ./$(DEPDIR)/jdarith.Plo + -rm -f ./$(DEPDIR)/jdatadst.Plo + -rm -f ./$(DEPDIR)/jdatasrc.Plo + -rm -f ./$(DEPDIR)/jdcoefct.Plo + -rm -f ./$(DEPDIR)/jdcolor.Plo + -rm -f ./$(DEPDIR)/jddctmgr.Plo + -rm -f ./$(DEPDIR)/jdhuff.Plo + -rm -f ./$(DEPDIR)/jdinput.Plo + -rm -f ./$(DEPDIR)/jdmainct.Plo + -rm -f ./$(DEPDIR)/jdmarker.Plo + -rm -f ./$(DEPDIR)/jdmaster.Plo + -rm -f ./$(DEPDIR)/jdmerge.Plo + -rm -f ./$(DEPDIR)/jdpostct.Plo + -rm -f ./$(DEPDIR)/jdsample.Plo + -rm -f ./$(DEPDIR)/jdtrans.Plo + -rm -f ./$(DEPDIR)/jerror.Plo + -rm -f ./$(DEPDIR)/jfdctflt.Plo + -rm -f ./$(DEPDIR)/jfdctfst.Plo + -rm -f ./$(DEPDIR)/jfdctint.Plo + -rm -f ./$(DEPDIR)/jidctflt.Plo + -rm -f ./$(DEPDIR)/jidctfst.Plo + -rm -f ./$(DEPDIR)/jidctint.Plo + -rm -f ./$(DEPDIR)/jmemmgr.Plo + -rm -f ./$(DEPDIR)/jpegtran.Po + -rm -f ./$(DEPDIR)/jquant1.Plo + -rm -f ./$(DEPDIR)/jquant2.Plo + -rm -f ./$(DEPDIR)/jutils.Plo + -rm -f ./$(DEPDIR)/rdbmp.Po + -rm -f ./$(DEPDIR)/rdcolmap.Po + -rm -f ./$(DEPDIR)/rdgif.Po + -rm -f ./$(DEPDIR)/rdjpgcom.Po + -rm -f ./$(DEPDIR)/rdppm.Po + -rm -f ./$(DEPDIR)/rdrle.Po + -rm -f ./$(DEPDIR)/rdswitch.Po + -rm -f ./$(DEPDIR)/rdtarga.Po + -rm -f ./$(DEPDIR)/transupp.Po + -rm -f ./$(DEPDIR)/wrbmp.Po + -rm -f ./$(DEPDIR)/wrgif.Po + -rm -f ./$(DEPDIR)/wrjpgcom.Po + -rm -f ./$(DEPDIR)/wrppm.Po + -rm -f ./$(DEPDIR)/wrrle.Po + -rm -f ./$(DEPDIR)/wrtarga.Po + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-local uninstall-man \ + uninstall-nodist_pkgconfigDATA + +uninstall-man: uninstall-man1 + +.MAKE: all check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles am--refresh check \ + check-am check-local clean clean-binPROGRAMS clean-cscope \ + clean-generic clean-libLTLIBRARIES clean-libtool cscope \ + cscopelist-am ctags ctags-am distclean distclean-compile \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags dvi dvi-am html html-am info info-am install \ + install-am install-binPROGRAMS install-data install-data-am \ + install-data-local install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am \ + install-includeHEADERS install-info install-info-am \ + install-libLTLIBRARIES install-man install-man1 \ + install-nodist_pkgconfigDATA install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \ + uninstall-includeHEADERS uninstall-libLTLIBRARIES \ + uninstall-local uninstall-man uninstall-man1 \ + uninstall-nodist_pkgconfigDATA + +.PRECIOUS: Makefile + + +# Install jconfig.h +install-data-local: + $(mkinstalldirs) $(DESTDIR)$(includedir) + $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h + +# Uninstall jconfig.h +uninstall-local: + rm -f $(DESTDIR)$(includedir)/jconfig.h + +# Run tests +test: check-local +check-local: + rm -f testout* + ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg + ./djpeg -dct int -gif -outfile testout.gif $(srcdir)/testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg + ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm + ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg + cmp $(srcdir)/testimg.ppm testout.ppm + cmp $(srcdir)/testimg.gif testout.gif + cmp $(srcdir)/testimg.bmp testout.bmp + cmp $(srcdir)/testimg.jpg testout.jpg + cmp $(srcdir)/testimg.ppm testoutp.ppm + cmp $(srcdir)/testimgp.jpg testoutp.jpg + cmp $(srcdir)/testorig.jpg testoutt.jpg + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jpeg-9d/README b/jpeg-9d/README new file mode 100644 index 0000000..13b245c --- /dev/null +++ b/jpeg-9d/README @@ -0,0 +1,371 @@ +The Independent JPEG Group's JPEG software +========================================== + +README for release 9d of 12-Jan-2020 +==================================== + +This distribution contains the ninth public release of the Independent JPEG +Group's free JPEG software. You are welcome to redistribute this software and +to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. + +This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone, +Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson, +John Korejwa, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, +Ge' Weijers, and other members of the Independent JPEG Group. + +IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee +(previously known as JPEG, together with ITU-T SG16). + + +DOCUMENTATION ROADMAP +===================== + +This file contains the following sections: + +OVERVIEW General description of JPEG and the IJG software. +LEGAL ISSUES Copyright, lack of warranty, terms of distribution. +REFERENCES Where to learn more about JPEG. +ARCHIVE LOCATIONS Where to find newer versions of this software. +ACKNOWLEDGMENTS Special thanks. +FILE FORMAT WARS Software *not* to get. +TO DO Plans for future IJG releases. + +Other documentation files in the distribution are: + +User documentation: + install.txt How to configure and install the IJG software. + usage.txt Usage instructions for cjpeg, djpeg, jpegtran, + rdjpgcom, and wrjpgcom. + *.1 Unix-style man pages for programs (same info as usage.txt). + wizard.txt Advanced usage instructions for JPEG wizards only. + change.log Version-to-version change highlights. +Programmer and internal documentation: + libjpeg.txt How to use the JPEG library in your own programs. + example.c Sample code for calling the JPEG library. + structure.txt Overview of the JPEG library's internal structure. + filelist.txt Road map of IJG files. + coderules.txt Coding style rules --- please read if you contribute code. + +Please read at least the files install.txt and usage.txt. Some information +can also be found in the JPEG FAQ (Frequently Asked Questions) article. See +ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. + +If you want to understand how the JPEG code works, we suggest reading one or +more of the REFERENCES, then looking at the documentation files (in roughly +the order listed) before diving into the code. + + +OVERVIEW +======== + +This package contains C software to implement JPEG image encoding, decoding, +and transcoding. JPEG (pronounced "jay-peg") is a standardized compression +method for full-color and grayscale images. + +This software implements JPEG baseline, extended-sequential, and progressive +compression processes. Provision is made for supporting all variants of these +processes, although some uncommon parameter settings aren't implemented yet. +We have made no provision for supporting the hierarchical or lossless +processes defined in the standard. + +We provide a set of library routines for reading and writing JPEG image files, +plus two sample applications "cjpeg" and "djpeg", which use the library to +perform conversion between JPEG and some other popular image file formats. +The library is intended to be reused in other applications. + +In order to support file conversion and viewing software, we have included +considerable functionality beyond the bare JPEG coding/decoding capability; +for example, the color quantization modules are not strictly part of JPEG +decoding, but they are essential for output to colormapped file formats or +colormapped displays. These extra functions can be compiled out of the +library if not required for a particular application. + +We have also included "jpegtran", a utility for lossless transcoding between +different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple +applications for inserting and extracting textual comments in JFIF files. + +The emphasis in designing this software has been on achieving portability and +flexibility, while also making it fast enough to be useful. In particular, +the software is not intended to be read as a tutorial on JPEG. (See the +REFERENCES section for introductory material.) Rather, it is intended to +be reliable, portable, industrial-strength code. We do not claim to have +achieved that goal in every aspect of the software, but we strive for it. + +We welcome the use of this software as a component of commercial products. +No royalty is required, but we do ask for an acknowledgement in product +documentation, as described under LEGAL ISSUES. + + +LEGAL ISSUES +============ + +In plain English: + +1. We don't promise that this software works. (But if you find any bugs, + please let us know!) +2. You can use this software for whatever you want. You don't have to pay us. +3. You may not pretend that you wrote this software. If you use it in a + program, you must acknowledge somewhere in your documentation that + you've used the IJG code. + +In legalese: + +The authors make NO WARRANTY or representation, either express or implied, +with respect to this software, its quality, accuracy, merchantability, or +fitness for a particular purpose. This software is provided "AS IS", and you, +its user, assume the entire risk as to its quality and accuracy. + +This software is copyright (C) 1991-2020, Thomas G. Lane, Guido Vollbeding. +All Rights Reserved except as specified below. + +Permission is hereby granted to use, copy, modify, and distribute this +software (or portions thereof) for any purpose, without fee, subject to these +conditions: +(1) If any part of the source code for this software is distributed, then this +README file must be included, with this copyright and no-warranty notice +unaltered; and any additions, deletions, or changes to the original files +must be clearly indicated in accompanying documentation. +(2) If only executable code is distributed, then the accompanying +documentation must state that "this software is based in part on the work of +the Independent JPEG Group". +(3) Permission for use of this software is granted only if the user accepts +full responsibility for any undesirable consequences; the authors accept +NO LIABILITY for damages of any kind. + +These conditions apply to any software derived from or based on the IJG code, +not just to the unmodified library. If you use our work, you ought to +acknowledge us. + +Permission is NOT granted for the use of any IJG author's name or company name +in advertising or publicity relating to this software or products derived from +it. This software may be referred to only as "the Independent JPEG Group's +software". + +We specifically permit and encourage the use of this software as the basis of +commercial products, provided that all warranty or liability claims are +assumed by the product vendor. + + +The Unix configuration script "configure" was produced with GNU Autoconf. +It is copyright by the Free Software Foundation but is freely distributable. +The same holds for its supporting scripts (config.guess, config.sub, +ltmain.sh). Another support script, install-sh, is copyright by X Consortium +but is also freely distributable. + + +REFERENCES +========== + +We recommend reading one or more of these references before trying to +understand the innards of the JPEG software. + +The best short technical introduction to the JPEG compression algorithm is + Wallace, Gregory K. "The JPEG Still Picture Compression Standard", + Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. +(Adjacent articles in that issue discuss MPEG motion picture compression, +applications of JPEG, and related topics.) If you don't have the CACM issue +handy, a PDF file containing a revised version of Wallace's article is +available at http://www.ijg.org/files/Wallace.JPEG.pdf. The file (actually +a preprint for an article that appeared in IEEE Trans. Consumer Electronics) +omits the sample images that appeared in CACM, but it includes corrections +and some added material. Note: the Wallace article is copyright ACM and IEEE, +and it may not be used for commercial purposes. + +A somewhat less technical, more leisurely introduction to JPEG can be found in +"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by +M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides +good explanations and example C code for a multitude of compression methods +including JPEG. It is an excellent source if you are comfortable reading C +code but don't know much about data compression in general. The book's JPEG +sample code is far from industrial-strength, but when you are ready to look +at a full implementation, you've got one here... + +The best currently available description of JPEG is the textbook "JPEG Still +Image Data Compression Standard" by William B. Pennebaker and Joan L. +Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. +Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG +standards (DIS 10918-1 and draft DIS 10918-2). +Although this is by far the most detailed and comprehensive exposition of +JPEG publicly available, we point out that it is still missing an explanation +of the most essential properties and algorithms of the underlying DCT +technology. +If you think that you know about DCT-based JPEG after reading this book, +then you are in delusion. The real fundamentals and corresponding potential +of DCT-based JPEG are not publicly known so far, and that is the reason for +all the mistaken developments taking place in the image coding domain. + +The original JPEG standard is divided into two parts, Part 1 being the actual +specification, while Part 2 covers compliance testing methods. Part 1 is +titled "Digital Compression and Coding of Continuous-tone Still Images, +Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS +10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of +Continuous-tone Still Images, Part 2: Compliance testing" and has document +numbers ISO/IEC IS 10918-2, ITU-T T.83. +IJG JPEG 8 introduced an implementation of the JPEG SmartScale extension +which is specified in two documents: A contributed document at ITU and ISO +with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced +Image Coding", April 2006, Geneva, Switzerland. The latest version of this +document is Revision 3. And a contributed document ISO/IEC JTC1/SC29/WG1 N +5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany. +IJG JPEG 9 introduces a reversible color transform for improved lossless +compression which is described in a contributed document ISO/IEC JTC1/SC29/ +WG1 N 6080 with title "JPEG 9 Lossless Coding", June/July 2012, Paris, +France. + +The JPEG standard does not specify all details of an interchangeable file +format. For the omitted details we follow the "JFIF" conventions, version 2. +JFIF version 1 has been adopted as Recommendation ITU-T T.871 (05/2011) : +Information technology - Digital compression and coding of continuous-tone +still images: JPEG File Interchange Format (JFIF). It is available as a +free download in PDF file format from http://www.itu.int/rec/T-REC-T.871. +A PDF file of the older JFIF document is available at +http://www.w3.org/Graphics/JPEG/jfif3.pdf. + +The TIFF 6.0 file format specification can be obtained by FTP from +ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme +found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. +IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). +Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 +(Compression tag 7). Copies of this Note can be obtained from +http://www.ijg.org/files/. It is expected that the next revision +of the TIFF spec will replace the 6.0 JPEG design with the Note's design. +Although IJG's own code does not support TIFF/JPEG, the free libtiff library +uses our library to implement TIFF/JPEG per the Note. + + +ARCHIVE LOCATIONS +================= + +The "official" archive site for this software is www.ijg.org. +The most recent released version can always be found there in +directory "files". This particular version will be archived as +http://www.ijg.org/files/jpegsrc.v9d.tar.gz, and in Windows-compatible +"zip" archive format as http://www.ijg.org/files/jpegsr9d.zip. + +The JPEG FAQ (Frequently Asked Questions) article is a source of some +general information about JPEG. +It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ +and other news.answers archive sites, including the official news.answers +archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. +If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu +with body + send usenet/news.answers/jpeg-faq/part1 + send usenet/news.answers/jpeg-faq/part2 + + +ACKNOWLEDGMENTS +=============== + +Thank to Juergen Bruder for providing me with a copy of the common DCT +algorithm article, only to find out that I had come to the same result +in a more direct and comprehensible way with a more generative approach. + +Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the +ITU JPEG (Study Group 16) meeting in Geneva, Switzerland. + +Thank to Thomas Wiegand and Gary Sullivan for inviting me to the +Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland. + +Thank to Thomas Richter and Daniel Lee for inviting me to the +ISO/IEC JTC1/SC29/WG1 (previously known as JPEG, together with ITU-T SG16) +meeting in Berlin, Germany. + +Thank to John Korejwa and Massimo Ballerini for inviting me to +fruitful consultations in Boston, MA and Milan, Italy. + +Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther +Maier-Gerber, Walter Stoeber, Fred Schmitz, and Norbert Braunagel +for corresponding business development. + +Thank to Nico Zschach and Dirk Stelling of the technical support team +at the Digital Images company in Halle for providing me with extra +equipment for configuration tests. + +Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful +communication about JPEG configuration in Sigma Photo Pro software. + +Thank to Andrew Finkenstadt for hosting the ijg.org site. + +Thank to Thomas G. Lane for the original design and development of +this singular software package. + +Thank to Lars Goehler, Andreas Heinecke, Sebastian Fuss, Yvonne Roebert, +Andrej Werner, and Ulf-Dietrich Braumann for support and public relations. + + +FILE FORMAT WARS +================ + +The ISO/IEC JTC1/SC29/WG1 standards committee (previously known as JPEG, +together with ITU-T SG16) currently promotes different formats containing +the name "JPEG" which is misleading because these formats are incompatible +with original DCT-based JPEG and are based on faulty technologies. +IJG therefore does not and will not support such momentary mistakes +(see REFERENCES). +There exist also distributions under the name "OpenJPEG" promoting such +kind of formats which is misleading because they don't support original +JPEG images. +We have no sympathy for the promotion of inferior formats. Indeed, one of +the original reasons for developing this free software was to help force +convergence on common, interoperable format standards for JPEG files. +Don't use an incompatible file format! +(In any case, our decoder will remain capable of reading existing JPEG +image files indefinitely.) + +The ISO committee pretends to be "responsible for the popular JPEG" in their +public reports which is not true because they don't respond to actual +requirements for the maintenance of the original JPEG specification. +Furthermore, the ISO committee pretends to "ensure interoperability" with +their standards which is not true because their "standards" support only +application-specific and proprietary use cases and contain mathematically +incorrect code. + +There are currently different distributions in circulation containing the +name "libjpeg" which is misleading because they don't have the features and +are incompatible with formats supported by actual IJG libjpeg distributions. +One of those fakes is released by members of the ISO committee and just uses +the name of libjpeg for misdirection of people, similar to the abuse of the +name JPEG as described above, while having nothing in common with actual IJG +libjpeg distributions and containing mathematically incorrect code. +The other one claims to be a "derivative" or "fork" of the original libjpeg, +but violates the license conditions as described under LEGAL ISSUES above +and violates basic C programming properties. +We have no sympathy for the release of misleading, incorrect and illegal +distributions derived from obsolete code bases. +Don't use an obsolete code base! + +According to the UCC (Uniform Commercial Code) law, IJG has the lawful and +legal right to foreclose on certain standardization bodies and other +institutions or corporations that knowingly perform substantial and +systematic deceptive acts and practices, fraud, theft, and damaging of the +value of the people of this planet without their knowing, willing and +intentional consent. +The titles, ownership, and rights of these institutions and all their assets +are now duly secured and held in trust for the free people of this planet. +People of the planet, on every country, may have a financial interest in +the assets of these former principals, agents, and beneficiaries of the +foreclosed institutions and corporations. +IJG asserts what is: that each man, woman, and child has unalienable value +and rights granted and deposited in them by the Creator and not any one of +the people is subordinate to any artificial principality, corporate fiction +or the special interest of another without their appropriate knowing, +willing and intentional consent made by contract or accommodation agreement. +IJG expresses that which already was. +The people have already determined and demanded that public administration +entities, national governments, and their supporting judicial systems must +be fully transparent, accountable, and liable. +IJG has secured the value for all concerned free people of the planet. + +A partial list of foreclosed institutions and corporations ("Hall of Shame") +is currently prepared and will be published later. + + +TO DO +===== + +Version 9 is the second release of a new generation JPEG standard +to overcome the limitations of the original JPEG specification, +and is the first true source reference JPEG codec. +More features are being prepared for coming releases... + +Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org. diff --git a/jpeg-9d/aclocal.m4 b/jpeg-9d/aclocal.m4 new file mode 100644 index 0000000..f77f290 --- /dev/null +++ b/jpeg-9d/aclocal.m4 @@ -0,0 +1,10260 @@ +# generated automatically by aclocal 1.16.1 -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +]) + +# serial 58 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_PREPARE_CC_BASENAME +# ----------------------- +m4_defun([_LT_PREPARE_CC_BASENAME], [ +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in @S|@*""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} +])# _LT_PREPARE_CC_BASENAME + + +# _LT_CC_BASENAME(CC) +# ------------------- +# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, +# but that macro is also expanded into generated libtool script, which +# arranges for $SED and $ECHO to be set by different means. +m4_defun([_LT_CC_BASENAME], +[m4_require([_LT_PREPARE_CC_BASENAME])dnl +AC_REQUIRE([_LT_DECL_SED])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +func_cc_basename $1 +cc_basename=$func_cc_basename_result +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl +m4_require([_LT_CMD_TRUNCATE])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from 'configure', and 'config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# 'config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain=$ac_aux_dir/ltmain.sh +])# _LT_PROG_LTMAIN + + + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the 'libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to 'config.status' so that its +# declaration there will have the same value as in 'configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags='_LT_TAGS'dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into 'config.status', and then the shell code to quote escape them in +# for loops in 'config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# '#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test 0 = "$lt_write_fail" && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +'$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test 0 != $[#] +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try '$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try '$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test yes = "$silent" && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +_LT_COPYING +_LT_LIBTOOL_TAGS + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +_LT_PREPARE_MUNGE_PATH_LIST +_LT_PREPARE_CC_BASENAME + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS=$save_LDFLAGS + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[[012]][[,.]]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test yes = "$lt_cv_ld_force_load"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + m4_if([$1], [CXX], +[ if test yes != "$lt_cv_apple_cc_single_mod"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script that will find a shell with a builtin +# printf (that we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case $ECHO in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], + [Search for dependent libraries within DIR (or the compiler's sysroot + if not specified).])], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([$with_sysroot]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and where our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test yes = "[$]$2"; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS +]) + +if test yes = "[$]$2"; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n "$lt_cv_sys_max_cmd_len"; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test yes = "$cross_compiling"; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen=shl_load], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen=dlopen], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links=nottested +if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test no = "$hard_links"; then + AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", + [Define to the sub-directory where libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then + + # We can hardcode non-existent directories. + if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && + test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || + test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_PREPARE_MUNGE_PATH_LIST +# --------------------------- +# Make sure func_munge_path_list() is defined correctly. +m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], +[[# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x@S|@2 in + x) + ;; + *:) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" + ;; + x:*) + eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" + ;; + *) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + esac +} +]])# _LT_PREPARE_PATH_LIST + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +AC_ARG_VAR([LT_SYS_LIBRARY_PATH], +[User-defined run-time library search path.]) + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a[(]lib.so.V[)]' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], + [Detected run-time system search path for libraries]) +_LT_DECL([], [configure_time_lt_sys_library_path], [2], + [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program that can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$1"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac]) +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program that can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test no = "$withval" || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], +[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi]) +rm -f conftest.i conftest2.i conftest.out]) +])# _LT_PATH_DD + + +# _LT_CMD_TRUNCATE +# ---------------- +# find command to truncate a binary pipe +m4_defun([_LT_CMD_TRUNCATE], +[m4_require([_LT_PATH_DD]) +AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], +[printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) +_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], + [Command to truncate a binary pipe]) +])# _LT_CMD_TRUNCATE + + +# _LT_CHECK_MAGIC_METHOD +# ---------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_MAGIC_METHOD], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +AC_CACHE_CHECK([how to recognize dependent libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[[4-9]]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[[45]]*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi]) +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# _LT_DLL_DEF_P([FILE]) +# --------------------- +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with func_dll_def_p in the libtool script +AC_DEFUN([_LT_DLL_DEF_P], +[dnl + test DEF = "`$SED -n dnl + -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace + -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments + -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl + -e q dnl Only consider the first "real" line + $1`" dnl +])# _LT_DLL_DEF_P + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM=-lm) + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], + [Transform the output of nm into a list of symbols to manually relocate]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], + [The name lister interface]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test yes = "$GXX"; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64, which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test yes = "$GCC"; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS=$save_LDFLAGS]) + if test yes = "$lt_cv_irix_exported_symbol"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + osf3*) + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting $shlibpath_var if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC=$CC +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report what library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC=$lt_save_CC +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_caught_CXX_error"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test yes = "$GXX"; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test yes = "$GXX"; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test yes = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='$wl' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac + + if test yes = "$GXX"; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + # The "-G" linker flag allows undefined symbols. + _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes = "$GXX"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require '-G' NOT '-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no + + _LT_TAGVAR(GCC, $1)=$GXX + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test yes != "$_lt_caught_CXX_error" + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case @S|@2 in + .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; + *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case $prev$p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test x-L = "$p" || + test x-R = "$p"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test no = "$pre_test_object_deps_done"; then + case $prev in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)=$prev$p + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test no = "$pre_test_object_deps_done"; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)=$p + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)=$p + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test no = "$F77"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_disable_F77"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)=$G77 + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_F77" + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test no = "$FC"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_disable_FC"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_FC" + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)=$LD +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)=$LD +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code=$lt_simple_compile_test_code + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f "$lt_ac_sed" && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test 10 -lt "$lt_ac_count" && break + lt_ac_count=`expr $lt_ac_count + 1` + if test "$lt_ac_count" -gt "$lt_ac_max"; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine what file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS + +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 8 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option '$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl 'shared' nor 'disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], + [_LT_WITH_AIX_SONAME([aix])]) + ]) +])# _LT_SET_OPTIONS + + + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the 'shared' and +# 'disable-shared' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the 'static' and +# 'disable-static' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the 'fast-install' +# and 'disable-fast-install' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the 'fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the 'disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_AIX_SONAME([DEFAULT]) +# ---------------------------------- +# implement the --with-aix-soname flag, and support the `aix-soname=aix' +# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT +# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. +m4_define([_LT_WITH_AIX_SONAME], +[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl +shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[[5-9]]*,yes) + AC_MSG_CHECKING([which variant of shared library versioning to provide]) + AC_ARG_WITH([aix-soname], + [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], + [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], + [case $withval in + aix|svr4|both) + ;; + *) + AC_MSG_ERROR([Unknown argument to --with-aix-soname]) + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname], + [AC_CACHE_VAL([lt_cv_with_aix_soname], + [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) + with_aix_soname=$lt_cv_with_aix_soname]) + AC_MSG_RESULT([$with_aix_soname]) + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + +_LT_DECL([], [shared_archive_member_spec], [0], + [Shared archive member basename, for filename based shared library versioning on AIX])dnl +])# _LT_WITH_AIX_SONAME + +LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' +# LT_INIT options. +# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [pic_mode=m4_default([$1], [default])]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) + +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software +# Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59, which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) + +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 4179 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.6]) +m4_define([LT_PACKAGE_REVISION], [2.4.6]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.6' +macro_revision='2.4.6' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# Copyright (C) 2002-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.16' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.16.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.16.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# Copyright (C) 2011-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_AR([ACT-IF-FAIL]) +# ------------------------- +# Try to determine the archiver interface, and trigger the ar-lib wrapper +# if it is needed. If the detection of archiver interface fails, run +# ACT-IF-FAIL (default is to abort configure with a proper error message). +AC_DEFUN([AM_PROG_AR], +[AC_BEFORE([$0], [LT_INIT])dnl +AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([ar-lib])dnl +AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false]) +: ${AR=ar} + +AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface], + [AC_LANG_PUSH([C]) + am_cv_ar_interface=ar + AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])], + [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + ]) + AC_LANG_POP([C])]) + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + m4_default([$1], + [AC_MSG_ERROR([could not determine $AR interface])]) + ;; +esac +AC_SUBST([AR])dnl +]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + AS_CASE([$CONFIG_FILES], + [*\'*], [eval set x "$CONFIG_FILES"], + [*], [set x $CONFIG_FILES]) + shift + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf + do + # Strip MF so we end up with the name of the file. + am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`AS_DIRNAME(["$am_mf"])` + am_filepart=`AS_BASENAME(["$am_mf"])` + AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) || am_rc=$? + done + if test $am_rc -ne 0; then + AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking).]) + fi + AS_UNSET([am_dirpart]) + AS_UNSET([am_filepart]) + AS_UNSET([am_mf]) + AS_UNSET([am_rc]) + rm -f conftest-deps.mk +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking is enabled. +# This creates each '.Po' and '.Plo' makefile fragment that we'll need in +# order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check whether make has an 'include' directive that can support all +# the idioms we need for our automatic dependency tracking code. +AC_DEFUN([AM_MAKE_INCLUDE], +[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) +cat > confinc.mk << 'END' +am__doit: + @echo this is the am__doit target >confinc.out +.PHONY: am__doit +END +am__include="#" +am__quote= +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) + AS_CASE([$?:`cat confinc.out 2>/dev/null`], + ['0:this is the am__doit target'], + [AS_CASE([$s], + [BSD], [am__include='.include' am__quote='"'], + [am__include='include' am__quote=''])]) + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +AC_MSG_RESULT([${_am_result}]) +AC_SUBST([am__include])]) +AC_SUBST([am__quote])]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/jpeg-9d/apps.sln b/jpeg-9d/apps.sln new file mode 100644 index 0000000..ac850ce --- /dev/null +++ b/jpeg-9d/apps.sln @@ -0,0 +1,49 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 15 +VisualStudioVersion = 15.0.28307.329 +MinimumVisualStudioVersion = 10.0.40219.1 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcxproj", "{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcxproj", "{11043137-B453-4DFA-9010-4D2B9DC1545C}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcxproj", "{025BAC50-51B5-4FFE-BC47-3F920BB4047E}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcxproj", "{C81513DB-78DC-46BC-BC98-82E745203976}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcxproj", "{B57065D4-DDDA-4668-BAF5-2D49270C973C}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.ActiveCfg = Release|Win32 + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.Build.0 = Release|Win32 + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|x64.ActiveCfg = Release|x64 + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|x64.Build.0 = Release|x64 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.ActiveCfg = Release|Win32 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.Build.0 = Release|Win32 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|x64.ActiveCfg = Release|x64 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|x64.Build.0 = Release|x64 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.ActiveCfg = Release|Win32 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.Build.0 = Release|Win32 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|x64.ActiveCfg = Release|x64 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|x64.Build.0 = Release|x64 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.ActiveCfg = Release|Win32 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.Build.0 = Release|Win32 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|x64.ActiveCfg = Release|x64 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|x64.Build.0 = Release|x64 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.ActiveCfg = Release|Win32 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.Build.0 = Release|Win32 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|x64.ActiveCfg = Release|x64 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|x64.Build.0 = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + SolutionGuid = {2F6B4B1E-5D02-475F-B2FE-EA2D9E697E54} + EndGlobalSection +EndGlobal diff --git a/jpeg-9d/ar-lib b/jpeg-9d/ar-lib new file mode 100644 index 0000000..0baa4f6 --- /dev/null +++ b/jpeg-9d/ar-lib @@ -0,0 +1,270 @@ +#! /bin/sh +# Wrapper for Microsoft lib.exe + +me=ar-lib +scriptversion=2012-03-01.08; # UTC + +# Copyright (C) 2010-2018 Free Software Foundation, Inc. +# Written by Peter Rosin . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + + +# func_error message +func_error () +{ + echo "$me: $1" 1>&2 + exit 1 +} + +file_conv= + +# func_file_conv build_file +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv in + mingw) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_at_file at_file operation archive +# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE +# for each of them. +# When interpreting the content of the @FILE, do NOT use func_file_conv, +# since the user would need to supply preconverted file names to +# binutils ar, at least for MinGW. +func_at_file () +{ + operation=$2 + archive=$3 + at_file_contents=`cat "$1"` + eval set x "$at_file_contents" + shift + + for member + do + $AR -NOLOGO $operation:"$member" "$archive" || exit $? + done +} + +case $1 in + '') + func_error "no command. Try '$0 --help' for more information." + ;; + -h | --h*) + cat < /* to declare isupper(), tolower() */ +#ifdef NEED_SIGNAL_CATCHER +#include /* to declare signal() */ +#endif +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + + +/* + * Signal catcher to ensure that temporary files are removed before aborting. + * NB: for Amiga Manx C this is actually a global routine named _abort(); + * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... + */ + +#ifdef NEED_SIGNAL_CATCHER + +static j_common_ptr sig_cinfo; + +void /* must be global for Manx C */ +signal_catcher (int signum) +{ + if (sig_cinfo != NULL) { + if (sig_cinfo->err != NULL) /* turn off trace output */ + sig_cinfo->err->trace_level = 0; + jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ + } + exit(EXIT_FAILURE); +} + + +GLOBAL(void) +enable_signal_catcher (j_common_ptr cinfo) +{ + sig_cinfo = cinfo; +#ifdef SIGINT /* not all systems have SIGINT */ + signal(SIGINT, signal_catcher); +#endif +#ifdef SIGTERM /* not all systems have SIGTERM */ + signal(SIGTERM, signal_catcher); +#endif +} + +#endif + + +/* + * Optional progress monitor: display a percent-done figure on stderr. + */ + +#ifdef PROGRESS_REPORT + +METHODDEF(void) +progress_monitor (j_common_ptr cinfo) +{ + cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; + int total_passes = prog->pub.total_passes + prog->total_extra_passes; + int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); + + if (percent_done != prog->percent_done) { + prog->percent_done = percent_done; + if (total_passes > 1) { + fprintf(stderr, "\rPass %d/%d: %3d%% ", + prog->pub.completed_passes + prog->completed_extra_passes + 1, + total_passes, percent_done); + } else { + fprintf(stderr, "\r %3d%% ", percent_done); + } + fflush(stderr); + } +} + + +GLOBAL(void) +start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) +{ + /* Enable progress display, unless trace output is on */ + if (cinfo->err->trace_level == 0) { + progress->pub.progress_monitor = progress_monitor; + progress->completed_extra_passes = 0; + progress->total_extra_passes = 0; + progress->percent_done = -1; + cinfo->progress = &progress->pub; + } +} + + +GLOBAL(void) +end_progress_monitor (j_common_ptr cinfo) +{ + /* Clear away progress display */ + if (cinfo->err->trace_level == 0) { + fprintf(stderr, "\r \r"); + fflush(stderr); + } +} + +#endif + + +/* + * Case-insensitive matching of possibly-abbreviated keyword switches. + * keyword is the constant keyword (must be lower case already), + * minchars is length of minimum legal abbreviation. + */ + +GLOBAL(boolean) +keymatch (char * arg, const char * keyword, int minchars) +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return FALSE; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return FALSE; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return FALSE; + return TRUE; /* A-OK */ +} + + +/* + * Routines to establish binary I/O mode for stdin and stdout. + * Non-Unix systems often require some hacking to get out of text mode. + */ + +GLOBAL(FILE *) +read_stdin (void) +{ + FILE * input_file = stdin; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdin\n"); + exit(EXIT_FAILURE); + } +#endif + return input_file; +} + + +GLOBAL(FILE *) +write_stdout (void) +{ + FILE * output_file = stdout; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdout\n"); + exit(EXIT_FAILURE); + } +#endif + return output_file; +} diff --git a/jpeg-9d/cdjpeg.h b/jpeg-9d/cdjpeg.h new file mode 100644 index 0000000..524ab3a --- /dev/null +++ b/jpeg-9d/cdjpeg.h @@ -0,0 +1,189 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quality_ratings SetQRates +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo, + boolean is_lzw)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, + boolean force_baseline)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FILE *) read_stdin JPP((void)); +EXTERN(FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif diff --git a/jpeg-9d/change.log b/jpeg-9d/change.log new file mode 100644 index 0000000..ed8ec6a --- /dev/null +++ b/jpeg-9d/change.log @@ -0,0 +1,502 @@ +CHANGE LOG for Independent JPEG Group's JPEG software + + +Version 9d 12-Jan-2020 +----------------------- + +Optimize the optimal Huffman code table generation to produce +slightly smaller files. Thank to John Korejwa for suggestion. +Note: Requires rebuild of testimgp.jpg. + +Decoding Huffman: Use default tables if tables are not defined. +Thank to Simone Azzalin for report (Motion JPEG), +and to Martin Strunz for hint. + +Add sanity check in optimal Huffman code table generation. +Thank to Adam Farley for suggestion. + +rdtarga.c: use read_byte(), with EOF check, instead of getc() +in read_*_pixel(). +Thank to Chijin Zhou for cjpeg potential vulnerability report. + +jmemnobs.c: respect the max_memory_to_use setting in +jpeg_mem_available() computation. Thank to Sheng Shu and +Dongdong She for djpeg potential vulnerability report. + +jdarith.c, jdhuff.c: avoid left shift of negative value +compiler warning in decode_mcu_AC_refine(). +Thank to Indu Bhagat for suggestion. + +Add x64 (64-bit) platform support, avoid compiler warnings. +Thank to Jonathan Potter, Feiyun Wang, and Sheng Shu for suggestion. + +Adjust libjpeg version specification for pkg-config file. +Thank to Chen Chen for suggestion. + +Restore GIF read and write support from libjpeg version 6a. +Thank to Wolfgang Werner (W.W.) Heinz for suggestion. + +Improve consistency in raw (downsampled) image data processing mode. +Thank to Zhongyuan Zhou for hint. + +Avoid out of bounds array read (AC derived table pointers) +in start pass in jdhuff.c. Thank to Peng Li for report. + +Improve code sanity (jdhuff.c). +Thank to Reza Mirzazade farkhani for reports. + +Add jpegtran -drop option; add options to the crop extension and wipe +to fill the extra area with content from the source image region, +instead of gray out. + + +Version 9c 14-Jan-2018 +----------------------- + +jpegtran: add an option to the -wipe switch to fill the region +with the average of adjacent blocks, instead of gray out. +Thank to Caitlyn Feddock and Maddie Ziegler for inspiration. + +Make range extension bits adjustable (in jpegint.h). +Thank to Robin Watts for suggestion. + +Provide macros for fflush() and ferror() in jinclude.h in order +to facilitate adaption by applications using an own FILE class. +Thank to Gerhard Huber for suggestion. + +Add libjpeg pkg-config file. Thank to Mark Lavi, Vincent Torri, +Patrick McMunn, and Huw Davies for suggestion. + +Add sanity checks in cjpeg image reader modules. +Thank to Bingchang, Liu for reports. + + +Version 9b 17-Jan-2016 +----------------------- + +Improvements and optimizations in DCT and color calculations. +Normalize range limit array composition and access pattern. +Thank to Sia Furler and Maddie Ziegler for inspiration. + +Use merged upsample with scaled DCT sizes larger than 8. +Thank to Taylor Hatala for inspiration. + +Check for excessive comment lengths in argument parsing in wrjpgcom.c. +Thank to Julian Cohen for hint. + +Add makefile.b32 for use with Borland C++ 32-bit (bcc32). +Thank to Joe Slater for contribution. + +Document 'f' specifier for jpegtran -crop specification. +Thank to Michele Martone for suggestion. + +Use defined value from header instead of hardwired number in rdswitch.c. +Thank to Robert Sprowson for hint. + + +Version 9a 19-Jan-2014 +----------------------- + +Add support for wide gamut color spaces (JFIF version 2). +Improve clarity and accuracy in color conversion modules. +Note: Requires rebuild of test images. + +Extend the bit depth support to all values from 8 to 12 +(BITS_IN_JSAMPLE configuration option in jmorecfg.h). +jpegtran now supports N bits sample data precision with all N from 8 to 12 +in a single instance. Thank to Roland Fassauer for inspiration. + +Try to resolve issues with new boolean type definition. +Thank also to v4hn for suggestion. + +Enable option to use default Huffman tables for lossless compression +(for hardware solution), and in this case improve lossless RGB compression +with reversible color transform. Thank to Benny Alexandar for hint. + +Extend the entropy decoding structure, so that extraneous bytes between +compressed scan data and following marker can be reported correctly. +Thank to Nigel Tao for hint. + +Add jpegtran -wipe option and extension for -crop. +Thank to Andrew Senior, David Clunie, and Josef Schmid for suggestion. + + +Version 9 13-Jan-2013 +---------------------- + +Add cjpeg -rgb1 option to create an RGB JPEG file, and insert +a simple reversible color transform into the processing which +significantly improves the compression. +The recommended command for lossless coding of RGB images is now +cjpeg -rgb1 -block 1 -arithmetic. +As said, this option improves the compression significantly, but +the files are not compatible with JPEG decoders prior to IJG v9 +due to the included color transform. +The used color transform and marker signaling is compatible with +other JPEG standards (e.g., JPEG-LS part 2). + +Remove the automatic de-ANSI-fication support (Automake 1.12). +Thank also to Nitin A Kamble for suggestion. + +Add remark for jpeg_mem_dest() in jdatadst.c. +Thank to Elie-Gregoire Khoury for the hint. + +Support files with invalid component identifiers (created +by Adobe PDF). Thank to Robin Watts for the suggestion. + +Adapt full buffer case in jcmainct.c for use with scaled DCT. +Thank to Sergii Biloshytskyi for the suggestion. + +Add type identifier for declaration of noreturn functions. +Thank to Brett L. Moore for the suggestion. + +Correct argument type in format string, avoid compiler warnings. +Thank to Vincent Torri for hint. + +Add missing #include directives in configuration checks, avoid +configuration errors. Thank to John Spencer for the hint. + + +Version 8d 15-Jan-2012 +----------------------- + +Add cjpeg -rgb option to create RGB JPEG files. +Using this switch suppresses the conversion from RGB +colorspace input to the default YCbCr JPEG colorspace. +This feature allows true lossless JPEG coding of RGB color images. +The recommended command for this purpose is currently +cjpeg -rgb -block 1 -arithmetic. +SmartScale capable decoder (introduced with IJG JPEG 8) required. +Thank to Michael Koch for the initial suggestion. + +Add option to disable the region adjustment in the transupp crop code. +Thank to Jeffrey Friedl for the suggestion. + +Thank to Richard Jones and Edd Dawson for various minor corrections. + +Thank to Akim Demaille for configure.ac cleanup. + + +Version 8c 16-Jan-2011 +----------------------- + +Add option to compression library and cjpeg (-block N) to use +different DCT block size. +All N from 1 to 16 are possible. Default is 8 (baseline format). +Larger values produce higher compression, +smaller values produce higher quality. +SmartScale capable decoder (introduced with IJG JPEG 8) required. + + +Version 8b 16-May-2010 +----------------------- + +Repair problem in new memory source manager with corrupt JPEG data. +Thank to Ted Campbell and Samuel Chun for the report. + +Repair problem in Makefile.am test target. +Thank to anonymous user for the report. + +Support MinGW installation with automatic configure. +Thank to Volker Grabsch for the suggestion. + + +Version 8a 28-Feb-2010 +----------------------- + +Writing tables-only datastreams via jpeg_write_tables works again. + +Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg. +Thank to Brett Blackham for the suggestion. + +Improve accuracy in floating point IDCT calculation. +Thank to Robert Hooke for the hint. + + +Version 8 10-Jan-2010 +---------------------- + +jpegtran now supports the same -scale option as djpeg for "lossless" resize. +An implementation of the JPEG SmartScale extension is required for this +feature. A (draft) specification of the JPEG SmartScale extension is +available as a contributed document at ITU and ISO. Revision 2 or later +of the document is required (latest document version is Revision 3). +The SmartScale extension will enable more features beside lossless resize +in future implementations, as described in the document (new compression +options). + +Add sanity check in BMP reader module to avoid cjpeg crash for empty input +image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error). + +Add data source and destination managers for read from and write to +memory buffers. New API functions jpeg_mem_src and jpeg_mem_dest. +Thank to Roberto Boni from Italy for the suggestion. + + +Version 7 27-Jun-2009 +---------------------- + +New scaled DCTs implemented. +djpeg now supports scalings N/8 with all N from 1 to 16. +cjpeg now supports scalings 8/N with all N from 1 to 16. +Scaled DCTs with size larger than 8 are now also used for resolving the +common 2x2 chroma subsampling case without additional spatial resampling. +Separate spatial resampling for those kind of files is now only necessary +for N>8 scaling cases. +Furthermore, separate scaled DCT functions are provided for direct resolving +of the common asymmetric subsampling cases (2x1 and 1x2) without additional +spatial resampling. + +cjpeg -quality option has been extended for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). +New API function jpeg_default_qtables() and q_scale_factor array in library. + +Added -nosmooth option to cjpeg, complementary to djpeg. +New variable "do_fancy_downsampling" in library, complement to fancy +upsampling. Fancy upsampling now uses direct DCT scaling with sizes +larger than 8. The old method is not reversible and has been removed. + +Support arithmetic entropy encoding and decoding. +Added files jaricom.c, jcarith.c, jdarith.c. + +Straighten the file structure: +Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h. + +jpegtran has a new "lossless" cropping feature. + +Implement -perfect option in jpegtran, new API function +jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch) + +Better error messages for jpegtran fopen failure. +(DP 203_jpegtran_errmsg.dpatch) + +Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c: +according to Netpbm, the de facto standard implementation of the PNM formats, +the most significant byte is first. (DP 203_rdppm.dpatch) + +Add -raw option to rdjpgcom not to mangle the output. +(DP 205_rdjpgcom_raw.dpatch) + +Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch) + +Add extern "C" to jpeglib.h. +This avoids the need to put extern "C" { ... } around #include "jpeglib.h" +in your C++ application. Defining the symbol DONT_USE_EXTERN_C in the +configuration prevents this. (DP 202_jpeglib.h_c++.dpatch) + + +Version 6b 27-Mar-1998 +----------------------- + +jpegtran has new features for lossless image transformations (rotation +and flipping) as well as "lossless" reduction to grayscale. + +jpegtran now copies comments by default; it has a -copy switch to enable +copying all APPn blocks as well, or to suppress comments. (Formerly it +always suppressed comments and APPn blocks.) jpegtran now also preserves +JFIF version and resolution information. + +New decompressor library feature: COM and APPn markers found in the input +file can be saved in memory for later use by the application. (Before, +you had to code this up yourself with a custom marker processor.) + +There is an unused field "void * client_data" now in compress and decompress +parameter structs; this may be useful in some applications. + +JFIF version number information is now saved by the decoder and accepted by +the encoder. jpegtran uses this to copy the source file's version number, +to ensure "jpegtran -copy all" won't create bogus files that contain JFXX +extensions but claim to be version 1.01. Applications that generate their +own JFXX extension markers also (finally) have a supported way to cause the +encoder to emit JFIF version number 1.02. + +djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather +than as unknown APP0 markers. + +In -verbose mode, djpeg and rdjpgcom will try to print the contents of +APP12 markers as text. Some digital cameras store useful text information +in APP12 markers. + +Handling of truncated data streams is more robust: blocks beyond the one in +which the error occurs will be output as uniform gray, or left unchanged +if decoding a progressive JPEG. The appearance no longer depends on the +Huffman tables being used. + +Huffman tables are checked for validity much more carefully than before. + +To avoid the Unisys LZW patent, djpeg's GIF output capability has been +changed to produce "uncompressed GIFs", and cjpeg's GIF input capability +has been removed altogether. We're not happy about it either, but there +seems to be no good alternative. + +The configure script now supports building libjpeg as a shared library +on many flavors of Unix (all the ones that GNU libtool knows how to +build shared libraries for). Use "./configure --enable-shared" to +try this out. + +New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. +Also, a jconfig file and a build script for Metrowerks CodeWarrior +on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there +are miscellaneous other minor improvements in the makefiles. + +jmemmac.c now knows how to create temporary files following Mac System 7 +conventions. + +djpeg's -map switch is now able to read raw-format PPM files reliably. + +cjpeg -progressive -restart no longer generates any unnecessary DRI markers. + +Multiple calls to jpeg_simple_progression for a single JPEG object +no longer leak memory. + + +Version 6a 7-Feb-96 +-------------------- + +Library initialization sequence modified to detect version mismatches +and struct field packing mismatches between library and calling application. +This change requires applications to be recompiled, but does not require +any application source code change. + +All routine declarations changed to the style "GLOBAL(type) name ...", +that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the +routine's return type as an argument. This makes it possible to add +Microsoft-style linkage keywords to all the routines by changing just +these macros. Note that any application code that was using these macros +will have to be changed. + +DCT coefficient quantization tables are now stored in normal array order +rather than zigzag order. Application code that calls jpeg_add_quant_table, +or otherwise manipulates quantization tables directly, will need to be +changed. If you need to make such code work with either older or newer +versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is +recommended. + +djpeg's trace capability now dumps DQT tables in natural order, not zigzag +order. This allows the trace output to be made into a "-qtables" file +more easily. + +New system-dependent memory manager module for use on Apple Macintosh. + +Fix bug in cjpeg's -smooth option: last one or two scanlines would be +duplicates of the prior line unless the image height mod 16 was 1 or 2. + +Repair minor problems in VMS, BCC, MC6 makefiles. + +New configure script based on latest GNU Autoconf. + +Correct the list of include files needed by MetroWerks C for ccommand(). + +Numerous small documentation updates. + + +Version 6 2-Aug-95 +------------------- + +Progressive JPEG support: library can read and write full progressive JPEG +files. A "buffered image" mode supports incremental decoding for on-the-fly +display of progressive images. Simply recompiling an existing IJG-v5-based +decoder with v6 should allow it to read progressive files, though of course +without any special progressive display. + +New "jpegtran" application performs lossless transcoding between different +JPEG formats; primarily, it can be used to convert baseline to progressive +JPEG and vice versa. In support of jpegtran, the library now allows lossless +reading and writing of JPEG files as DCT coefficient arrays. This ability +may be of use in other applications. + +Notes for programmers: +* We changed jpeg_start_decompress() to be able to suspend; this makes all +decoding modes available to suspending-input applications. However, +existing applications that use suspending input will need to be changed +to check the return value from jpeg_start_decompress(). You don't need to +do anything if you don't use a suspending data source. +* We changed the interface to the virtual array routines: access_virt_array +routines now take a count of the number of rows to access this time. The +last parameter to request_virt_array routines is now interpreted as the +maximum number of rows that may be accessed at once, but not necessarily +the height of every access. + + +Version 5b 15-Mar-95 +--------------------- + +Correct bugs with grayscale images having v_samp_factor > 1. + +jpeg_write_raw_data() now supports output suspension. + +Correct bugs in "configure" script for case of compiling in +a directory other than the one containing the source files. + +Repair bug in jquant1.c: sometimes didn't use as many colors as it could. + +Borland C makefile and jconfig file work under either MS-DOS or OS/2. + +Miscellaneous improvements to documentation. + + +Version 5a 7-Dec-94 +-------------------- + +Changed color conversion roundoff behavior so that grayscale values are +represented exactly. (This causes test image files to change.) + +Make ordered dither use 16x16 instead of 4x4 pattern for a small quality +improvement. + +New configure script based on latest GNU Autoconf. +Fix configure script to handle CFLAGS correctly. +Rename *.auto files to *.cfg, so that configure script still works if +file names have been truncated for DOS. + +Fix bug in rdbmp.c: didn't allow for extra data between header and image. + +Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. + +Fix several bugs in rdrle.c. + +NEED_SHORT_EXTERNAL_NAMES option was broken. + +Revise jerror.h/jerror.c for more flexibility in message table. + +Repair oversight in jmemname.c NO_MKTEMP case: file could be there +but unreadable. + + +Version 5 24-Sep-94 +-------------------- + +Version 5 represents a nearly complete redesign and rewrite of the IJG +software. Major user-visible changes include: + * Automatic configuration simplifies installation for most Unix systems. + * A range of speed vs. image quality tradeoffs are supported. + This includes resizing of an image during decompression: scaling down + by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. + * New programs rdjpgcom and wrjpgcom allow insertion and extraction + of text comments in a JPEG file. + +The application programmer's interface to the library has changed completely. +Notable improvements include: + * We have eliminated the use of callback routines for handling the + uncompressed image data. The application now sees the library as a + set of routines that it calls to read or write image data on a + scanline-by-scanline basis. + * The application image data is represented in a conventional interleaved- + pixel format, rather than as a separate array for each color channel. + This can save a copying step in many programs. + * The handling of compressed data has been cleaned up: the application can + supply routines to source or sink the compressed data. It is possible to + suspend processing on source/sink buffer overrun, although this is not + supported in all operating modes. + * All static state has been eliminated from the library, so that multiple + instances of compression or decompression can be active concurrently. + * JPEG abbreviated datastream formats are supported, ie, quantization and + Huffman tables can be stored separately from the image data. + * And not only that, but the documentation of the library has improved + considerably! + + +The last widely used release before the version 5 rewrite was version 4A of +18-Feb-93. Change logs before that point have been discarded, since they +are not of much interest after the rewrite. diff --git a/jpeg-9d/cjpeg.1 b/jpeg-9d/cjpeg.1 new file mode 100644 index 0000000..355d340 --- /dev/null +++ b/jpeg-9d/cjpeg.1 @@ -0,0 +1,384 @@ +.TH CJPEG 1 "28 April 2019" +.SH NAME +cjpeg \- compress an image file to a JPEG file +.SH SYNOPSIS +.B cjpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B cjpeg +compresses the named image file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +The currently supported input file formats are: PPM (PBMPLUS color +format), PGM (PBMPLUS grayscale format), BMP, GIF, Targa, and RLE (Utah Raster +Toolkit format). (RLE is supported only if the URT library is available, +which it isn't on most non-Unix systems.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-quality " N[,...]" +Scale quantization tables to adjust image quality. Quality is 0 (worst) to +100 (best); default is 75. (See below for more info.) +.TP +.B \-grayscale +Create monochrome JPEG file from color input. Be sure to use this switch when +compressing a grayscale BMP or GIF file, because +.B cjpeg +isn't bright enough to notice whether a BMP or GIF file uses only shades of +gray. By saying +.BR \-grayscale , +you'll get a smaller JPEG file that takes less time to process. +.TP +.B \-rgb +Create RGB JPEG file. +Using this switch suppresses the conversion from RGB +colorspace input to the default YCbCr JPEG colorspace. +You can use this switch in combination with the +.BI \-block " N" +switch (see below) for lossless JPEG coding. +See also the +.B \-rgb1 +switch below. +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. Without this, default +encoding parameters are used. +.B \-optimize +usually makes the JPEG file a little smaller, but +.B cjpeg +runs somewhat slower and needs much more memory. Image quality and speed of +decompression are unaffected by +.BR \-optimize . +.TP +.B \-progressive +Create progressive JPEG file (see below). +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all N from 1 to 16, where M is the destination DCT size, which is 8 +by default (see +.BI \-block " N" +switch below). +.TP +.B \-targa +Input file is Targa format. Targa files that contain an "identification" +field will not be automatically recognized by +.BR cjpeg ; +for such files you must specify +.B \-targa +to make +.B cjpeg +treat the input as Targa format. +For most Targa files, you won't need this switch. +.PP +The +.B \-quality +switch lets you trade off compressed file size against quality of the +reconstructed image: the higher the quality setting, the larger the JPEG file, +and the closer the output image will be to the original input. Normally you +want to use the lowest quality setting (smallest file) that decompresses into +something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at +.B \-quality +75, then go up 5 or 10 counts at a time until you are happy with the output +image. (The optimal setting will vary from one image to another.) +.PP +.B \-quality +100 will generate a quantization table of all 1's, minimizing loss in the +quantization step (but there is still information loss in subsampling, as well +as roundoff error). This setting is mainly of interest for experimental +purposes. Quality values above about 95 are +.B not +recommended for normal use; the compressed file size goes up dramatically for +hardly any gain in output image quality. +.PP +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try +.B \-quality +2 (or so) for some amusing Cubist effects. (Note: quality +values below about 25 generate 2-byte quantization tables, which are +considered optional in the JPEG standard. +.B cjpeg +emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use +.B \-baseline +if you need to ensure compatibility at low quality values.) +.PP +The +.B \-quality +option has been extended in IJG version 7 for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the +.B \-quality +ratings refer to the quantization table slots, and that the last value is +replicated if there are more q-table slots than parameters. The default +q-table slots are 0 for luminance and 1 for chrominance with default tables as +given in the JPEG standard. This is compatible with the old behaviour in case +that only one parameter is given, which is then used for both luminance and +chrominance (slots 0 and 1). More or custom quantization tables can be set +with +.B \-qtables +and assigned to components with +.B \-qslots +parameter (see the "wizard" switches below). +.B Caution: +You must explicitly add +.BI \-sample " 1x1" +for efficient separate color +quality selection, since the default value used by library is 2x2! +.PP +The +.B \-progressive +switch creates a "progressive JPEG" file. In this type of JPEG file, the data +is stored in multiple scans of increasing quality. If the file is being +transmitted over a slow communications link, the decoder can use the first +scan to display a low-quality image very quickly, and can then improve the +display with each subsequent scan. The final image is exactly equivalent to a +standard JPEG file of the same quality setting, and the total file size is +about the same --- often a little smaller. +.PP +Switches for advanced users: +.TP +.B \-arithmetic +Use arithmetic coding. +.B Caution: +arithmetic coded JPEG is not yet widely implemented, so many decoders will +be unable to view an arithmetic coded JPEG file at all. +.TP +.BI \-block " N" +Set DCT block size. All N from 1 to 16 are possible. +Default is 8 (baseline format). +Larger values produce higher compression, +smaller values produce higher quality +(exact DCT stage possible with 1 or 2; with the default quality of 75 and +default Luminance qtable the DCT+Quantization stage is lossless for N=1). +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. +.TP +.B \-rgb1 +Create RGB JPEG file with reversible color transform. +Works like the +.B \-rgb +switch (see above) and inserts a simple reversible color transform +into the processing which significantly improves the compression. +Use this switch in combination with the +.BI \-block " N" +switch (see above) for lossless JPEG coding. +.B Caution: +A decoder with inverse color transform support is required for +this feature. Reversible color transform support is not yet +widely implemented, so many decoders will be unable to view +a reversible color transformed JPEG file at all. +.TP +.B \-bgycc +Create big gamut YCC JPEG file. +In this type of encoding the color difference components are quantized +further by a factor of 2 compared to the normal Cb/Cr values, thus creating +space to allow larger color values with higher saturation than the normal +gamut limits to be encoded. In order to compensate for the loss of color +fidelity compared to a normal YCC encoded file, the color quantization +tables can be adjusted accordingly. For example, +.B cjpeg \-bgycc \-quality +80,90 will give similar results as +.B cjpeg \-quality +80. +.B Caution: +For correct decompression a decoder with big gamut YCC support (JFIF +version 2) is required. An old decoder may or may not display a big +gamut YCC encoded JPEG file, depending on JFIF version check and +corresponding warning/error configuration. In case of a granted +decompression the old decoder will display the image with half +saturated colors. +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-nosmooth +Don't use high-quality downsampling. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.B \-restart 0 +(the default) means no restart markers. +.TP +.BI \-smooth " N" +Smooth the input image to eliminate dithering noise. N, ranging from 1 to +100, indicates the strength of smoothing. 0 (the default) means no smoothing. +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.PP +The +.B \-restart +option inserts extra markers that allow a JPEG decoder to resynchronize after +a transmission error. Without restart markers, any damage to a compressed +file will usually ruin the image from the point of the error to the end of the +image; with restart markers, the damage is usually confined to the portion of +the image up to the next restart marker. Of course, the restart markers +occupy extra space. We recommend +.B \-restart 1 +for images that will be transmitted across unreliable networks such as Usenet. +.PP +The +.B \-smooth +option filters the input to eliminate fine-scale noise. This is often useful +when converting dithered images to JPEG: a moderate smoothing factor of 10 to +50 gets rid of dithering patterns in the input file, resulting in a smaller +JPEG file and a better-looking image. Too large a smoothing factor will +visibly blur the image, however. +.PP +Switches for wizards: +.TP +.B \-baseline +Force baseline-compatible quantization tables to be generated. This clamps +quantization values to 8 bits even at low quality settings. (This switch is +poorly named, since it does not ensure that the output is actually baseline +JPEG. For example, you can use +.B \-baseline +and +.B \-progressive +together.) +.TP +.BI \-qtables " file" +Use the quantization tables given in the specified text file. +.TP +.BI \-qslots " N[,...]" +Select which quantization table to use for each color component. +.TP +.BI \-sample " HxV[,...]" +Set JPEG sampling factors for each color component. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, \fBdon't use them\fR. These switches are +documented further in the file wizard.txt. +.SH EXAMPLES +.LP +This example compresses the PPM file foo.ppm with a quality factor of +60 and saves the output as foo.jpg: +.IP +.B cjpeg \-quality +.I 60 foo.ppm +.B > +.I foo.jpg +.SH HINTS +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with +.BR cjpeg 's +.B \-quality +and +.B \-smooth +options to get a satisfactory conversion. +.B \-smooth 10 +or so is often helpful. +.PP +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. +.PP +The +.B \-optimize +option to +.B cjpeg +is worth using when you are making a "final" version for posting or archiving. +It's also a win when you are using low quality settings to make very small +JPEG files; the percentage improvement is often a lot more than it is on +larger files. (At present, +.B \-optimize +mode is always selected when generating progressive JPEG files.) +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +Not all variants of BMP and Targa file formats are supported. +.PP +The +.B \-targa +switch is not a bug, it's a feature. (It would be a bug if the Targa format +designers had not been clueless.) diff --git a/jpeg-9d/cjpeg.c b/jpeg-9d/cjpeg.c new file mode 100644 index 0000000..3cb07fa --- /dev/null +++ b/jpeg-9d/cjpeg.c @@ -0,0 +1,664 @@ +/* + * cjpeg.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for the JPEG compressor. + * It should work on any system with Unix- or MS-DOS-style command lines. + * + * Two different command line styles are permitted, depending on the + * compile-time switch TWO_FILE_COMMANDLINE: + * cjpeg [options] inputfile outputfile + * cjpeg [options] [inputfile] + * In the second style, output is always to standard output, which you'd + * normally redirect to a file or pipe to some other program. Input is + * either from a named file or from standard input (typically redirected). + * The second style is convenient on Unix but is unhelpful on systems that + * don't support pipes. Also, you MUST use the first style if your system + * doesn't do binary I/O to stdin/stdout. + * To simplify script writing, the "-outfile" switch is provided. The syntax + * cjpeg [options] -outfile outputfile inputfile + * works regardless of which command line style is used. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "jversion.h" /* for version message */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* Create the add-on message string table. */ + +#define JMESSAGE(code,string) string , + +static const char * const cdjpeg_message_table[] = { +#include "cderror.h" + NULL +}; + + +/* + * This routine determines what format the input file is, + * and selects the appropriate input-reading module. + * + * To determine which family of input formats the file belongs to, + * we may look only at the first byte of the file, since C does not + * guarantee that more than one character can be pushed back with ungetc. + * Looking at additional bytes would require one of these approaches: + * 1) assume we can fseek() the input file (fails for piped input); + * 2) assume we can push back more than one character (works in + * some C implementations, but unportable); + * 3) provide our own buffering (breaks input readers that want to use + * stdio directly, such as the RLE library); + * or 4) don't put back the data, and modify the input_init methods to assume + * they start reading after the start of file (also breaks RLE library). + * #1 is attractive for MS-DOS but is untenable on Unix. + * + * The most portable solution for file types that can't be identified by their + * first byte is to make the user tell us what they are. This is also the + * only approach for "raw" file types that contain only arbitrary values. + * We presently apply this method for Targa files. Most of the time Targa + * files start with 0x00, so we recognize that case. Potentially, however, + * a Targa file could start with any byte value (byte 0 is the length of the + * seldom-used ID field), so we provide a switch to force Targa input mode. + */ + +static boolean is_targa; /* records user -targa switch */ + + +LOCAL(cjpeg_source_ptr) +select_file_type (j_compress_ptr cinfo, FILE * infile) +{ + int c; + + if (is_targa) { +#ifdef TARGA_SUPPORTED + return jinit_read_targa(cinfo); +#else + ERREXIT(cinfo, JERR_TGA_NOTCOMP); +#endif + } + + if ((c = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_INPUT_EMPTY); + if (ungetc(c, infile) == EOF) + ERREXIT(cinfo, JERR_UNGETC_FAILED); + + switch (c) { +#ifdef BMP_SUPPORTED + case 'B': + return jinit_read_bmp(cinfo); +#endif +#ifdef GIF_SUPPORTED + case 'G': + return jinit_read_gif(cinfo); +#endif +#ifdef PPM_SUPPORTED + case 'P': + return jinit_read_ppm(cinfo); +#endif +#ifdef RLE_SUPPORTED + case 'R': + return jinit_read_rle(cinfo); +#endif +#ifdef TARGA_SUPPORTED + case 0x00: + return jinit_read_targa(cinfo); +#endif + default: + ERREXIT(cinfo, JERR_UNKNOWN_FORMAT); + break; + } + + return NULL; /* suppress compiler warnings */ +} + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -quality N[,...] Compression quality (0..100; 5-95 is useful range)\n"); + fprintf(stderr, " -grayscale Create monochrome JPEG file\n"); + fprintf(stderr, " -rgb Create RGB JPEG file\n"); +#ifdef ENTROPY_OPT_SUPPORTED + fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); +#endif +#ifdef C_PROGRESSIVE_SUPPORTED + fprintf(stderr, " -progressive Create progressive JPEG file\n"); +#endif +#ifdef DCT_SCALING_SUPPORTED + fprintf(stderr, " -scale M/N Scale image by fraction M/N, eg, 1/2\n"); +#endif +#ifdef TARGA_SUPPORTED + fprintf(stderr, " -targa Input file is Targa format (usually not needed)\n"); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef C_ARITH_CODING_SUPPORTED + fprintf(stderr, " -arithmetic Use arithmetic coding\n"); +#endif +#ifdef DCT_SCALING_SUPPORTED + fprintf(stderr, " -block N DCT block size (1..16; default is 8)\n"); +#endif +#if JPEG_LIB_VERSION_MAJOR >= 9 + fprintf(stderr, " -rgb1 Create RGB JPEG file with reversible color transform\n"); + fprintf(stderr, " -bgycc Create big gamut YCC JPEG file\n"); +#endif +#ifdef DCT_ISLOW_SUPPORTED + fprintf(stderr, " -dct int Use integer DCT method%s\n", + (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); +#endif +#ifdef DCT_IFAST_SUPPORTED + fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", + (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); +#endif +#ifdef DCT_FLOAT_SUPPORTED + fprintf(stderr, " -dct float Use floating-point DCT method%s\n", + (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); +#endif + fprintf(stderr, " -nosmooth Don't use high-quality downsampling\n"); + fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); +#ifdef INPUT_SMOOTHING_SUPPORTED + fprintf(stderr, " -smooth N Smooth dithered input (N=1..100 is strength)\n"); +#endif + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + fprintf(stderr, "Switches for wizards:\n"); + fprintf(stderr, " -baseline Force baseline quantization tables\n"); + fprintf(stderr, " -qtables file Use quantization tables given in file\n"); + fprintf(stderr, " -qslots N[,...] Set component quantization tables\n"); + fprintf(stderr, " -sample HxV[,...] Set component sampling factors\n"); +#ifdef C_MULTISCAN_FILES_SUPPORTED + fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); +#endif + exit(EXIT_FAILURE); +} + + +LOCAL(int) +parse_switches (j_compress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + boolean force_baseline; + boolean simple_progressive; + char * qualityarg = NULL; /* saves -quality parm if any */ + char * qtablefile = NULL; /* saves -qtables filename if any */ + char * qslotsarg = NULL; /* saves -qslots parm if any */ + char * samplearg = NULL; /* saves -sample parm if any */ + char * scansarg = NULL; /* saves -scans parm if any */ + + /* Set up default JPEG parameters. */ + + force_baseline = FALSE; /* by default, allow 16-bit quantizers */ + simple_progressive = FALSE; + is_targa = FALSE; + outfilename = NULL; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "arithmetic", 1)) { + /* Use arithmetic coding. */ +#ifdef C_ARITH_CODING_SUPPORTED + cinfo->arith_code = TRUE; +#else + fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "baseline", 2)) { + /* Force baseline-compatible output (8-bit quantizer values). */ + force_baseline = TRUE; + + } else if (keymatch(arg, "block", 2)) { + /* Set DCT block size. */ +#if defined DCT_SCALING_SUPPORTED && JPEG_LIB_VERSION_MAJOR >= 8 && \ + (JPEG_LIB_VERSION_MAJOR > 8 || JPEG_LIB_VERSION_MINOR >= 3) + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + if (val < 1 || val > 16) + usage(); + cinfo->block_size = val; +#else + fprintf(stderr, "%s: sorry, block size setting not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "dct", 2)) { + /* Select DCT algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "int", 1)) { + cinfo->dct_method = JDCT_ISLOW; + } else if (keymatch(argv[argn], "fast", 2)) { + cinfo->dct_method = JDCT_IFAST; + } else if (keymatch(argv[argn], "float", 2)) { + cinfo->dct_method = JDCT_FLOAT; + } else + usage(); + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { + /* Force a monochrome JPEG file to be generated. */ + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + + } else if (keymatch(arg, "rgb", 3) || keymatch(arg, "rgb1", 4)) { + /* Force an RGB JPEG file to be generated. */ +#if JPEG_LIB_VERSION_MAJOR >= 9 + /* Note: Entropy table assignment in jpeg_set_colorspace depends + * on color_transform. + */ + cinfo->color_transform = arg[3] ? JCT_SUBTRACT_GREEN : JCT_NONE; +#endif + jpeg_set_colorspace(cinfo, JCS_RGB); + + } else if (keymatch(arg, "bgycc", 5)) { + /* Force a big gamut YCC JPEG file to be generated. */ +#if JPEG_LIB_VERSION_MAJOR >= 9 && \ + (JPEG_LIB_VERSION_MAJOR > 9 || JPEG_LIB_VERSION_MINOR >= 1) + jpeg_set_colorspace(cinfo, JCS_BG_YCC); +#else + fprintf(stderr, "%s: sorry, BG_YCC colorspace not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "nosmooth", 3)) { + /* Suppress fancy downsampling. */ + cinfo->do_fancy_downsampling = FALSE; + + } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { + /* Enable entropy parm optimization. */ +#ifdef ENTROPY_OPT_SUPPORTED + cinfo->optimize_coding = TRUE; +#else + fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "progressive", 1)) { + /* Select simple progressive mode. */ +#ifdef C_PROGRESSIVE_SUPPORTED + simple_progressive = TRUE; + /* We must postpone execution until num_components is known. */ +#else + fprintf(stderr, "%s: sorry, progressive output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "quality", 1)) { + /* Quality ratings (quantization table scaling factors). */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qualityarg = argv[argn]; + + } else if (keymatch(arg, "qslots", 2)) { + /* Quantization table slot numbers. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qslotsarg = argv[argn]; + /* Must delay setting qslots until after we have processed any + * colorspace-determining switches, since jpeg_set_colorspace sets + * default quant table numbers. + */ + + } else if (keymatch(arg, "qtables", 2)) { + /* Quantization tables fetched from file. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qtablefile = argv[argn]; + /* We postpone actually reading the file in case -quality comes later. */ + + } else if (keymatch(arg, "restart", 1)) { + /* Restart interval in MCU rows (or in MCUs with 'b'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (lval < 0 || lval > 65535L) + usage(); + if (ch == 'b' || ch == 'B') { + cinfo->restart_interval = (unsigned int) lval; + cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ + } else { + cinfo->restart_in_rows = (int) lval; + /* restart_interval will be computed during startup */ + } + + } else if (keymatch(arg, "sample", 2)) { + /* Set sampling factors. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + samplearg = argv[argn]; + /* Must delay setting sample factors until after we have processed any + * colorspace-determining switches, since jpeg_set_colorspace sets + * default sampling factors. + */ + + } else if (keymatch(arg, "scale", 4)) { + /* Scale the image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%u/%u", + &cinfo->scale_num, &cinfo->scale_denom) != 2) + usage(); + + } else if (keymatch(arg, "scans", 4)) { + /* Set scan script. */ +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + scansarg = argv[argn]; + /* We must postpone reading the file in case -progressive appears. */ +#else + fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "smooth", 2)) { + /* Set input smoothing factor. */ + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + if (val < 0 || val > 100) + usage(); + cinfo->smoothing_factor = val; + + } else if (keymatch(arg, "targa", 1)) { + /* Input file is Targa format. */ + is_targa = TRUE; + + } else { + usage(); /* bogus switch */ + } + } + + /* Post-switch-scanning cleanup */ + + if (for_real) { + + /* Set quantization tables for selected quality. */ + /* Some or all may be overridden if -qtables is present. */ + if (qualityarg != NULL) /* process -quality if it was present */ + if (! set_quality_ratings(cinfo, qualityarg, force_baseline)) + usage(); + + if (qtablefile != NULL) /* process -qtables if it was present */ + if (! read_quant_tables(cinfo, qtablefile, force_baseline)) + usage(); + + if (qslotsarg != NULL) /* process -qslots if it was present */ + if (! set_quant_slots(cinfo, qslotsarg)) + usage(); + + if (samplearg != NULL) /* process -sample if it was present */ + if (! set_sample_factors(cinfo, samplearg)) + usage(); + +#ifdef C_PROGRESSIVE_SUPPORTED + if (simple_progressive) /* process -progressive; -scans can override */ + jpeg_simple_progression(cinfo); +#endif + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (scansarg != NULL) /* process -scans if it was present */ + if (! read_scan_script(cinfo, scansarg)) + usage(); +#endif + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + int file_index; + cjpeg_source_ptr src_mgr; + FILE * input_file; + FILE * output_file; + JDIMENSION num_scanlines; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "cjpeg"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG compression object with default error handling. */ + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + /* Add some application-specific error messages (from cderror.h) */ + jerr.addon_message_table = cdjpeg_message_table; + jerr.first_addon_message = JMSG_FIRSTADDONCODE; + jerr.last_addon_message = JMSG_LASTADDONCODE; + + /* Now safe to enable signal catcher. */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &cinfo); +#endif + + /* Initialize JPEG parameters. + * Much of this may be overridden later. + * In particular, we don't yet know the input file's color space, + * but we need to provide some value for jpeg_set_defaults() to work. + */ + + cinfo.in_color_space = JCS_RGB; /* arbitrary guess */ + jpeg_set_defaults(&cinfo); + + /* Scan command line to find file names. + * It is convenient to use just one switch-parsing routine, but the switch + * values read here are ignored; we will rescan the switches after opening + * the input file. + */ + + file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + input_file = read_stdin(); + } + + /* Open the output file. */ + if (outfilename != NULL) { + if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + output_file = write_stdout(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &cinfo, &progress); +#endif + + /* Figure out the input file format, and set up to read it. */ + src_mgr = select_file_type(&cinfo, input_file); + src_mgr->input_file = input_file; + + /* Read the input file header to obtain file size & colorspace. */ + (*src_mgr->start_input) (&cinfo, src_mgr); + + /* Now that we know input colorspace, fix colorspace-dependent defaults */ + jpeg_default_colorspace(&cinfo); + + /* Adjust default compression parameters by re-parsing the options */ + file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); + + /* Specify data destination for compression */ + jpeg_stdio_dest(&cinfo, output_file); + + /* Start compressor */ + jpeg_start_compress(&cinfo, TRUE); + + /* Process data */ + while (cinfo.next_scanline < cinfo.image_height) { + num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr); + (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines); + } + + /* Finish compression and release memory */ + (*src_mgr->finish_input) (&cinfo, src_mgr); + jpeg_finish_compress(&cinfo); + jpeg_destroy_compress(&cinfo); + + /* Close files, if we opened them */ + if (input_file != stdin) + fclose(input_file); + if (output_file != stdout) + fclose(output_file); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &cinfo); +#endif + + /* All done. */ + exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/jpeg-9d/cjpeg.vcxproj b/jpeg-9d/cjpeg.vcxproj new file mode 100644 index 0000000..8817aae --- /dev/null +++ b/jpeg-9d/cjpeg.vcxproj @@ -0,0 +1,117 @@ + + + + + Release + Win32 + + + Release + x64 + + + + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57} + Win32Proj + cjpeg + 10.0 + + + + Application + false + true + Unicode + v142 + + + Application + false + true + Unicode + v142 + + + + + + + + + + + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + $(Configuration)\$(Platform)\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + $(Configuration)\$(Platform)\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/jpeg-9d/cjpeg.vcxproj.filters b/jpeg-9d/cjpeg.vcxproj.filters new file mode 100644 index 0000000..d16cb2c --- /dev/null +++ b/jpeg-9d/cjpeg.vcxproj.filters @@ -0,0 +1,69 @@ + + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/jpeg-9d/ckconfig.c b/jpeg-9d/ckconfig.c new file mode 100644 index 0000000..e658623 --- /dev/null +++ b/jpeg-9d/ckconfig.c @@ -0,0 +1,402 @@ +/* + * ckconfig.c + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + */ + +/* + * This program is intended to help you determine how to configure the JPEG + * software for installation on a particular system. The idea is to try to + * compile and execute this program. If your compiler fails to compile the + * program, make changes as indicated in the comments below. Once you can + * compile the program, run it, and it will produce a "jconfig.h" file for + * your system. + * + * As a general rule, each time you try to compile this program, + * pay attention only to the *first* error message you get from the compiler. + * Many C compilers will issue lots of spurious error messages once they + * have gotten confused. Go to the line indicated in the first error message, + * and read the comments preceding that line to see what to change. + * + * Almost all of the edits you may need to make to this program consist of + * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL", + * or vice versa. This is called defining or undefining that symbol. + */ + + +/* First we must see if your system has the include files we need. + * We start out with the assumption that your system has all the ANSI-standard + * include files. If you get any error trying to include one of these files, + * undefine the corresponding HAVE_xxx symbol. + */ + +#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */ +#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */ +#include +#endif + +#define HAVE_STDLIB_H /* same thing for stdlib.h */ +#ifdef HAVE_STDLIB_H +#include +#endif + +#include /* If you ain't got this, you ain't got C. */ + +/* We have to see if your string functions are defined by + * strings.h (old BSD convention) or string.h (everybody else). + * We try the non-BSD convention first; define NEED_BSD_STRINGS + * if the compiler says it can't find string.h. + */ + +#undef NEED_BSD_STRINGS + +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif + +/* On some systems (especially older Unix machines), type size_t is + * defined only in the include file . If you get a failure + * on the size_t test below, try defining NEED_SYS_TYPES_H. + */ + +#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */ +#ifdef NEED_SYS_TYPES_H +#include +#endif + + +/* Usually type size_t is defined in one of the include files we've included + * above. If not, you'll get an error on the "typedef size_t my_size_t;" line. + * In that case, first try defining NEED_SYS_TYPES_H just above. + * If that doesn't work, you'll have to search through your system library + * to figure out which include file defines "size_t". Look for a line that + * says "typedef something-or-other size_t;". Then, change the line below + * that says "#include " to instead include the file + * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find + * type size_t anywhere, try replacing "#include " with + * "typedef unsigned int size_t;". + */ + +#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */ + +#ifdef NEED_SPECIAL_INCLUDE +#include +#endif + +typedef size_t my_size_t; /* The payoff: do we have size_t now? */ + + +/* The next question is whether your compiler supports ANSI-style function + * prototypes. You need to know this in order to choose between using + * makefile.ansi and using makefile.unix. + * The #define line below is set to assume you have ANSI function prototypes. + * If you get an error in this group of lines, undefine HAVE_PROTOTYPES. + */ + +#define HAVE_PROTOTYPES + +#ifdef HAVE_PROTOTYPES +int testfunction (int arg1, int * arg2); /* check prototypes */ + +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; + +int testfunction (int arg1, int * arg2) /* check definitions */ +{ + return arg2[arg1]; +} + +int test2function (void) /* check void arg list */ +{ + return 0; +} +#endif + + +/* Now we want to find out if your compiler knows what "unsigned char" means. + * If you get an error on the "unsigned char un_char;" line, + * then undefine HAVE_UNSIGNED_CHAR. + */ + +#define HAVE_UNSIGNED_CHAR + +#ifdef HAVE_UNSIGNED_CHAR +unsigned char un_char; +#endif + + +/* Now we want to find out if your compiler knows what "unsigned short" means. + * If you get an error on the "unsigned short un_short;" line, + * then undefine HAVE_UNSIGNED_SHORT. + */ + +#define HAVE_UNSIGNED_SHORT + +#ifdef HAVE_UNSIGNED_SHORT +unsigned short un_short; +#endif + + +/* Now we want to find out if your compiler understands type "void". + * If you get an error anywhere in here, undefine HAVE_VOID. + */ + +#define HAVE_VOID + +#ifdef HAVE_VOID +/* Caution: a C++ compiler will insist on complete prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +#endif + + +/* Now we want to find out if your compiler knows what "const" means. + * If you get an error here, undefine HAVE_CONST. + */ + +#define HAVE_CONST + +#ifdef HAVE_CONST +static const int carray[3] = {1, 2, 3}; + +#ifdef HAVE_PROTOTYPES +int test4function (const int arg1) +#else +int test4function (arg1) + const int arg1; +#endif +{ + return carray[arg1]; +} +#endif + + +/* If you get an error or warning about this structure definition, + * define INCOMPLETE_TYPES_BROKEN. + */ + +#undef INCOMPLETE_TYPES_BROKEN + +#ifndef INCOMPLETE_TYPES_BROKEN +typedef struct undefined_structure * undef_struct_ptr; +#endif + + +/* If you get an error about duplicate names, + * define NEED_SHORT_EXTERNAL_NAMES. + */ + +#undef NEED_SHORT_EXTERNAL_NAMES + +#ifndef NEED_SHORT_EXTERNAL_NAMES + +int possibly_duplicate_function () +{ + return 0; +} + +int possibly_dupli_function () +{ + return 1; +} + +#endif + + + +/************************************************************************ + * OK, that's it. You should not have to change anything beyond this + * point in order to compile and execute this program. (You might get + * some warnings, but you can ignore them.) + * When you run the program, it will make a couple more tests that it + * can do automatically, and then it will create jconfig.h and print out + * any additional suggestions it has. + ************************************************************************ + */ + + +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} + + +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} + + +#ifdef HAVE_PROTOTYPES +int main (int argc, char ** argv) +#else +int main (argc, argv) + int argc; + char ** argv; +#endif +{ + char signed_char_check = (char) (-67); + FILE *outfile; + + /* Attempt to write jconfig.h */ + if ((outfile = fopen("jconfig.h", "w")) == NULL) { + printf("Failed to write jconfig.h\n"); + return 1; + } + + /* Write out all the info */ + fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n"); + fprintf(outfile, "/* see jconfig.txt for explanations */\n\n"); +#ifdef HAVE_PROTOTYPES + fprintf(outfile, "#define HAVE_PROTOTYPES\n"); +#else + fprintf(outfile, "#undef HAVE_PROTOTYPES\n"); +#endif +#ifdef HAVE_UNSIGNED_CHAR + fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n"); +#endif +#ifdef HAVE_UNSIGNED_SHORT + fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n"); +#endif +#ifdef HAVE_VOID + fprintf(outfile, "/* #define void char */\n"); +#else + fprintf(outfile, "#define void char\n"); +#endif +#ifdef HAVE_CONST + fprintf(outfile, "/* #define const */\n"); +#else + fprintf(outfile, "#define const\n"); +#endif + if (is_char_signed((int) signed_char_check)) + fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define CHAR_IS_UNSIGNED\n"); +#ifdef HAVE_STDDEF_H + fprintf(outfile, "#define HAVE_STDDEF_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDDEF_H\n"); +#endif +#ifdef HAVE_STDLIB_H + fprintf(outfile, "#define HAVE_STDLIB_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDLIB_H\n"); +#endif +#ifdef NEED_BSD_STRINGS + fprintf(outfile, "#define NEED_BSD_STRINGS\n"); +#else + fprintf(outfile, "#undef NEED_BSD_STRINGS\n"); +#endif +#ifdef NEED_SYS_TYPES_H + fprintf(outfile, "#define NEED_SYS_TYPES_H\n"); +#else + fprintf(outfile, "#undef NEED_SYS_TYPES_H\n"); +#endif + fprintf(outfile, "#undef NEED_FAR_POINTERS\n"); +#ifdef NEED_SHORT_EXTERNAL_NAMES + fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n"); +#else + fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n"); +#endif +#ifdef INCOMPLETE_TYPES_BROKEN + fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n"); +#else + fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n"); +#endif + fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n"); + if (is_shifting_signed(-0x7F7E80B1L)) + fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n"); + fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n"); + fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n"); + fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n"); + fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n"); + fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n"); + fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n"); + fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n"); + fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n"); + fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n"); + fprintf(outfile, "#undef DONT_USE_B_MODE\n"); + fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n"); + fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n"); + + /* Close the jconfig.h file */ + fclose(outfile); + + /* User report */ + printf("Configuration check for Independent JPEG Group's software done.\n"); + printf("\nI have written the jconfig.h file for you.\n\n"); +#ifdef HAVE_PROTOTYPES + printf("You should use makefile.ansi as the starting point for your Makefile.\n"); +#else + printf("You should use makefile.unix as the starting point for your Makefile.\n"); +#endif + +#ifdef NEED_SPECIAL_INCLUDE + printf("\nYou'll need to change jconfig.h to include the system include file\n"); + printf("that you found type size_t in, or add a direct definition of type\n"); + printf("size_t if that's what you used. Just add it to the end.\n"); +#endif + + return 0; +} diff --git a/jpeg-9d/coderules.txt b/jpeg-9d/coderules.txt new file mode 100644 index 0000000..357929f --- /dev/null +++ b/jpeg-9d/coderules.txt @@ -0,0 +1,118 @@ +IJG JPEG LIBRARY: CODING RULES + +Copyright (C) 1991-1996, Thomas G. Lane. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Since numerous people will be contributing code and bug fixes, it's important +to establish a common coding style. The goal of using similar coding styles +is much more important than the details of just what that style is. + +In general we follow the recommendations of "Recommended C Style and Coding +Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and +Brader). This document is available in the IJG FTP archive (see +jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl). + +Block comments should be laid out thusly: + +/* + * Block comments in this style. + */ + +We indent statements in K&R style, e.g., + if (test) { + then-part; + } else { + else-part; + } +with two spaces per indentation level. (This indentation convention is +handled automatically by GNU Emacs and many other text editors.) + +Multi-word names should be written in lower case with underscores, e.g., +multi_word_name (not multiWordName). Preprocessor symbols and enum constants +are similar but upper case (MULTI_WORD_NAME). Names should be unique within +the first fifteen characters. (On some older systems, global names must be +unique within six characters. We accommodate this without cluttering the +source code by using macros to substitute shorter names.) + +We use function prototypes everywhere; we rely on automatic source code +transformation to feed prototype-less C compilers. Transformation is done +by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript). +ansi2knr is not very bright, so it imposes a format requirement on function +declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions +should be written in the following style: + +LOCAL(int *) +function_name (int a, char *b) +{ + code... +} + +Note that each function definition must begin with GLOBAL(type), LOCAL(type), +or METHODDEF(type). These macros expand to "static type" or just "type" as +appropriate. They provide a readable indication of the routine's usage and +can readily be changed for special needs. (For instance, special linkage +keywords can be inserted for use in Windows DLLs.) + +ansi2knr does not transform method declarations (function pointers in +structs). We handle these with a macro JMETHOD, defined as + #ifdef HAVE_PROTOTYPES + #define JMETHOD(type,methodname,arglist) type (*methodname) arglist + #else + #define JMETHOD(type,methodname,arglist) type (*methodname) () + #endif +which is used like this: + struct function_pointers { + JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp)); + JMETHOD(void, term_entropy_encoder, (void)); + }; +Note the set of parentheses surrounding the parameter list. + +A similar solution is used for forward and external function declarations +(see the EXTERN and JPP macros). + +If the code is to work on non-ANSI compilers, we cannot rely on a prototype +declaration to coerce actual parameters into the right types. Therefore, use +explicit casts on actual parameters whenever the actual parameter type is not +identical to the formal parameter. Beware of implicit conversions to "int". + +It seems there are some non-ANSI compilers in which the sizeof() operator +is defined to return int, yet size_t is defined as long. Needless to say, +this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(), +so that the result is guaranteed to be of type size_t. + + +The JPEG library is intended to be used within larger programs. Furthermore, +we want it to be reentrant so that it can be used by applications that process +multiple images concurrently. The following rules support these requirements: + +1. Avoid direct use of file I/O, "malloc", error report printouts, etc; +pass these through the common routines provided. + +2. Minimize global namespace pollution. Functions should be declared static +wherever possible. (Note that our method-based calling conventions help this +a lot: in many modules only the initialization function will ever need to be +called directly, so only that function need be externally visible.) All +global function names should begin with "jpeg_", and should have an +abbreviated name (unique in the first six characters) substituted by macro +when NEED_SHORT_EXTERNAL_NAMES is set. + +3. Don't use global variables; anything that must be used in another module +should be in the common data structures. + +4. Don't use static variables except for read-only constant tables. Variables +that should be private to a module can be placed into private structures (see +the system architecture document, structure.txt). + +5. Source file names should begin with "j" for files that are part of the +library proper; source files that are not part of the library, such as cjpeg.c +and djpeg.c, do not begin with "j". Keep source file names to eight +characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep +compression and decompression code in separate source files --- some +applications may want only one half of the library. + +Note: these rules (particularly #4) are not followed religiously in the +modules that are used in cjpeg/djpeg but are not part of the JPEG library +proper. Those modules are not really intended to be used in other +applications. diff --git a/jpeg-9d/compile b/jpeg-9d/compile new file mode 100644 index 0000000..99e5052 --- /dev/null +++ b/jpeg-9d/compile @@ -0,0 +1,348 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2018-03-07.03; # UTC + +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ + icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff --git a/jpeg-9d/config.guess b/jpeg-9d/config.guess new file mode 100644 index 0000000..256083a --- /dev/null +++ b/jpeg-9d/config.guess @@ -0,0 +1,1476 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2018 Free Software Foundation, Inc. + +timestamp='2018-03-08' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2018 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > "$dummy.c" ; + for c in cc gcc c89 c99 ; do + if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "$UNAME_SYSTEM" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval "$set_cc_for_build" + cat <<-EOF > "$dummy.c" + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" + + # If ldd exists, use it to detect musl libc. + if command -v ldd >/dev/null && \ + ldd --version 2>&1 | grep -q ^musl + then + LIBC=musl + fi + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + "/sbin/$sysctl" 2>/dev/null || \ + "/usr/sbin/$sysctl" 2>/dev/null || \ + echo unknown)` + case "$UNAME_MACHINE_ARCH" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` + machine="${arch}${endian}"-unknown + ;; + *) machine="$UNAME_MACHINE_ARCH"-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case "$UNAME_MACHINE_ARCH" in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval "$set_cc_for_build" + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case "$UNAME_MACHINE_ARCH" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "$UNAME_VERSION" in + Debian*) + release='-gnu' + ;; + *) + release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "$machine-${os}${release}${abi}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" + exit ;; + *:MidnightBSD:*:*) + echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" + exit ;; + *:ekkoBSD:*:*) + echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" + exit ;; + *:SolidBSD:*:*) + echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd"$UNAME_RELEASE" + exit ;; + *:MirBSD:*:*) + echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" + exit ;; + *:Sortix:*:*) + echo "$UNAME_MACHINE"-unknown-sortix + exit ;; + *:Redox:*:*) + echo "$UNAME_MACHINE"-unknown-redox + exit ;; + mips:OSF1:*.*) + echo mips-dec-osf1 + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo "$UNAME_MACHINE"-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo "$UNAME_MACHINE"-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix"$UNAME_RELEASE" + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux"$UNAME_RELEASE" + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval "$set_cc_for_build" + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos"$UNAME_RELEASE" + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos"$UNAME_RELEASE" + ;; + sun4) + echo sparc-sun-sunos"$UNAME_RELEASE" + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos"$UNAME_RELEASE" + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint"$UNAME_RELEASE" + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint"$UNAME_RELEASE" + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint"$UNAME_RELEASE" + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten"$UNAME_RELEASE" + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten"$UNAME_RELEASE" + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix"$UNAME_RELEASE" + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix"$UNAME_RELEASE" + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix"$UNAME_RELEASE" + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && + dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`"$dummy" "$dummyarg"` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos"$UNAME_RELEASE" + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] + then + if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ + [ "$TARGET_BINARY_INTERFACE"x = x ] + then + echo m88k-dg-dgux"$UNAME_RELEASE" + else + echo m88k-dg-dguxbcs"$UNAME_RELEASE" + fi + else + echo i586-dg-dgux"$UNAME_RELEASE" + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi + echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi + echo "$IBM_ARCH"-ibm-aix"$IBM_REV" + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + case "$UNAME_MACHINE" in + 9000/31?) HP_ARCH=m68000 ;; + 9000/[34]??) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "$sc_cpu_version" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "$sc_kernel_bits" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "$HP_ARCH" = "" ]; then + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ "$HP_ARCH" = hppa2.0w ] + then + eval "$set_cc_for_build" + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + echo "$HP_ARCH"-hp-hpux"$HPUX_REV" + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux"$HPUX_REV" + exit ;; + 3050*:HI-UX:*:*) + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo "$UNAME_MACHINE"-unknown-osf1mk + else + echo "$UNAME_MACHINE"-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi"$UNAME_RELEASE" + exit ;; + *:BSD/OS:*:*) + echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case "$UNAME_PROCESSOR" in + amd64) + UNAME_PROCESSOR=x86_64 ;; + i386) + UNAME_PROCESSOR=i586 ;; + esac + echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" + exit ;; + i*:CYGWIN*:*) + echo "$UNAME_MACHINE"-pc-cygwin + exit ;; + *:MINGW64*:*) + echo "$UNAME_MACHINE"-pc-mingw64 + exit ;; + *:MINGW*:*) + echo "$UNAME_MACHINE"-pc-mingw32 + exit ;; + *:MSYS*:*) + echo "$UNAME_MACHINE"-pc-msys + exit ;; + i*:PW*:*) + echo "$UNAME_MACHINE"-pc-pw32 + exit ;; + *:Interix*:*) + case "$UNAME_MACHINE" in + x86) + echo i586-pc-interix"$UNAME_RELEASE" + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix"$UNAME_RELEASE" + exit ;; + IA64) + echo ia64-unknown-interix"$UNAME_RELEASE" + exit ;; + esac ;; + i*:UWIN*:*) + echo "$UNAME_MACHINE"-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + *:GNU:*:*) + # the GNU system + echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" + exit ;; + i*86:Minix:*:*) + echo "$UNAME_MACHINE"-pc-minix + exit ;; + aarch64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arm*:Linux:*:*) + eval "$set_cc_for_build" + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi + else + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + cris:Linux:*:*) + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + crisv32:Linux:*:*) + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + e2k:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + frv:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + hexagon:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + i*86:Linux:*:*) + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + exit ;; + ia64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + k1om:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + m32r*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + m68*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" + test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } + ;; + mips64el:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-"$LIBC" + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-"$LIBC" + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-"$LIBC" + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; + PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; + *) echo hppa-unknown-linux-"$LIBC" ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-"$LIBC" + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-"$LIBC" + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-"$LIBC" + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-"$LIBC" + exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" + exit ;; + sh64*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + sh*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + tile*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + vax:Linux:*:*) + echo "$UNAME_MACHINE"-dec-linux-"$LIBC" + exit ;; + x86_64:Linux:*:*) + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + exit ;; + xtensa*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo "$UNAME_MACHINE"-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo "$UNAME_MACHINE"-unknown-stop + exit ;; + i*86:atheos:*:*) + echo "$UNAME_MACHINE"-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo "$UNAME_MACHINE"-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos"$UNAME_RELEASE" + exit ;; + i*86:*DOS:*:*) + echo "$UNAME_MACHINE"-pc-msdosdjgpp + exit ;; + i*86:*:4.*:*) + UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" + else + echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}" + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" + else + echo "$UNAME_MACHINE"-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos"$UNAME_RELEASE" + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos"$UNAME_RELEASE" + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos"$UNAME_RELEASE" + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos"$UNAME_RELEASE" + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv"$UNAME_RELEASE" + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo "$UNAME_MACHINE"-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo "$UNAME_MACHINE"-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux"$UNAME_RELEASE" + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv"$UNAME_RELEASE" + else + echo mips-unknown-sysv"$UNAME_RELEASE" + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux"$UNAME_RELEASE" + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux"$UNAME_RELEASE" + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux"$UNAME_RELEASE" + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux"$UNAME_RELEASE" + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux"$UNAME_RELEASE" + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux"$UNAME_RELEASE" + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux"$UNAME_RELEASE" + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody"$UNAME_RELEASE" + exit ;; + *:Rhapsody:*:*) + echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + eval "$set_cc_for_build" + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc + if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_PPC >/dev/null + then + UNAME_PROCESSOR=powerpc + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-*:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSR-*:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSV-*:NONSTOP_KERNEL:*:*) + echo nsv-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSX-*:NONSTOP_KERNEL:*:*) + echo nsx-tandem-nsk"$UNAME_RELEASE" + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = 386; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo "$UNAME_MACHINE"-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux"$UNAME_RELEASE" + exit ;; + *:DragonFly:*:*) + echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "$UNAME_MACHINE" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" + exit ;; + i*86:rdos:*:*) + echo "$UNAME_MACHINE"-pc-rdos + exit ;; + i*86:AROS:*:*) + echo "$UNAME_MACHINE"-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo "$UNAME_MACHINE"-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; +esac + +echo "$0: unable to guess system type" >&2 + +case "$UNAME_MACHINE:$UNAME_SYSTEM" in + mips:Linux | mips64:Linux) + # If we got here on MIPS GNU/Linux, output extra information. + cat >&2 <&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = "$UNAME_MACHINE" +UNAME_RELEASE = "$UNAME_RELEASE" +UNAME_SYSTEM = "$UNAME_SYSTEM" +UNAME_VERSION = "$UNAME_VERSION" +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/jpeg-9d/config.sub b/jpeg-9d/config.sub new file mode 100644 index 0000000..9ccf09a --- /dev/null +++ b/jpeg-9d/config.sub @@ -0,0 +1,1801 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright 1992-2018 Free Software Foundation, Inc. + +timestamp='2018-03-08' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2018 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo "$1" + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | cloudabi*-eabi* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo "$1" | sed 's/-[^-]*$//'` + if [ "$basic_machine" != "$1" ] + then os=`echo "$1" | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | ba \ + | be32 | be64 \ + | bfin \ + | c4x | c8051 | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia16 | ia64 \ + | ip2k | iq2000 \ + | k1om \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 | nios2eb | nios2el \ + | ns16k | ns32k \ + | open8 | or1k | or1knd | or32 \ + | pdp10 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pru \ + | pyramid \ + | riscv32 | riscv64 \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ + | wasm32 \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | ba-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | c8051-* | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | e2k-* | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ + | ip2k-* | iq2000-* \ + | k1om-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa32r6-* | mipsisa32r6el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64r6-* | mipsisa64r6el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | or1k*-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pru-* \ + | pyramid-* \ + | riscv32-* | riscv64-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | visium-* \ + | wasm32-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-pc + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + asmjs) + basic_machine=asmjs-unknown + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2*) + basic_machine=m68k-bull + os=-sysv3 + ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` + os=$os"spe" + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` + os=-linux + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i686-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + nsv-tandem) + basic_machine=nsv-tandem + ;; + nsx-tandem) + basic_machine=nsx-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + x64) + basic_machine=x86_64-pc + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases that might get confused + # with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # es1800 is here to avoid being matched by es* (a different OS) + -es1800*) + os=-ose + ;; + # Now accept the basic system types. + # The portable systems comes first. + # Each alternative MUST end in a * to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* | -plan9* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \ + | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \ + | -midnightbsd*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -xray | -os68k* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo "$os" | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo "$os" | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo "$os" | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4*) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -pikeos*) + # Until real need of OS specific support for + # particular features comes up, bare metal + # configurations are quite functional. + case $basic_machine in + arm*) + os=-eabi + ;; + *) + os=-elf + ;; + esac + ;; + -nacl*) + ;; + -ios) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + c8051-*) + os=-elf + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + pru-*) + os=-elf + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` + ;; +esac + +echo "$basic_machine$os" +exit + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/jpeg-9d/configure b/jpeg-9d/configure new file mode 100644 index 0000000..ccd339d --- /dev/null +++ b/jpeg-9d/configure @@ -0,0 +1,15885 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libjpeg 9.4.0. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libjpeg' +PACKAGE_TARNAME='libjpeg' +PACKAGE_VERSION='9.4.0' +PACKAGE_STRING='libjpeg 9.4.0' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +JPEG_LIB_VERSION_MINOR +JPEG_LIB_VERSION_MAJOR +JPEG_LIB_VERSION +MEMORYMGR +LT_SYS_LIBRARY_PATH +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +SED +LIBTOOL +OBJDUMP +DLLTOOL +AS +EGREP +GREP +HAVE_LD_VERSION_SCRIPT_FALSE +HAVE_LD_VERSION_SCRIPT_TRUE +ac_ct_AR +AR +LN_S +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL +am__quote' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +enable_ld_version_script +enable_shared +enable_static +with_pic +enable_fast_install +with_aix_soname +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_maxmem +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +LT_SYS_LIBRARY_PATH' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libjpeg 9.4.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libjpeg] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libjpeg 9.4.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-ld-version-script + enable linker version script (default is enabled + when possible) + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-maxmem=N enable use of temp files, set max mem usage to N MB + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libjpeg configure 9.4.0 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libjpeg $as_me 9.4.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# Directory where autotools helper scripts lives. +ac_aux_dir= +for ac_dir in . "$srcdir"/.; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +# Generate configuration headers. +ac_config_headers="$ac_config_headers jconfig.h:jconfig.cfg" + + +# Hack: disable autoheader so that it doesn't overwrite our cfg template. +AUTOHEADER="echo autoheader ignored" + +# Check system type +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if ${ac_cv_target+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +# Initialize Automake +# Don't require all the GNU mandated files +am__api_version='1.16' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libjpeg' + VERSION='9.4.0' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +# Make --enable-silent-rules the default. +# To get verbose build output you may configure +# with --disable-silent-rules or use "make V=1". +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + + +# Add configure option --enable-maintainer-mode which enables +# dependency checking and generation useful to package maintainers. +# This is made an option to avoid confusing end users. + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +# Check for programs +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' +am__doit: + @echo this is the am__doit target >confinc.out +.PHONY: am__doit +END +am__include="#" +am__quote= +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in #( + '0:this is the am__doit target') : + case $s in #( + BSD) : + am__include='.include' am__quote='"' ;; #( + *) : + am__include='include' am__quote='' ;; +esac ;; #( + *) : + ;; +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + case $ac_cv_prog_cc_stdc in #( + no) : + ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #( + *) : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 +$as_echo_n "checking for $CC option to accept ISO C99... " >&6; } +if ${ac_cv_prog_cc_c99+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c99=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +#include + +// Check varargs macros. These examples are taken from C99 6.10.3.5. +#define debug(...) fprintf (stderr, __VA_ARGS__) +#define showlist(...) puts (#__VA_ARGS__) +#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) +static void +test_varargs_macros (void) +{ + int x = 1234; + int y = 5678; + debug ("Flag"); + debug ("X = %d\n", x); + showlist (The first, second, and third items.); + report (x>y, "x is %d but y is %d", x, y); +} + +// Check long long types. +#define BIG64 18446744073709551615ull +#define BIG32 4294967295ul +#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) +#if !BIG_OK + your preprocessor is broken; +#endif +#if BIG_OK +#else + your preprocessor is broken; +#endif +static long long int bignum = -9223372036854775807LL; +static unsigned long long int ubignum = BIG64; + +struct incomplete_array +{ + int datasize; + double data[]; +}; + +struct named_init { + int number; + const wchar_t *name; + double average; +}; + +typedef const char *ccp; + +static inline int +test_restrict (ccp restrict text) +{ + // See if C++-style comments work. + // Iterate through items via the restricted pointer. + // Also check for declarations in for loops. + for (unsigned int i = 0; *(text+i) != '\0'; ++i) + continue; + return 0; +} + +// Check varargs and va_copy. +static void +test_varargs (const char *format, ...) +{ + va_list args; + va_start (args, format); + va_list args_copy; + va_copy (args_copy, args); + + const char *str; + int number; + float fnumber; + + while (*format) + { + switch (*format++) + { + case 's': // string + str = va_arg (args_copy, const char *); + break; + case 'd': // int + number = va_arg (args_copy, int); + break; + case 'f': // float + fnumber = va_arg (args_copy, double); + break; + default: + break; + } + } + va_end (args_copy); + va_end (args); +} + +int +main () +{ + + // Check bool. + _Bool success = false; + + // Check restrict. + if (test_restrict ("String literal") == 0) + success = true; + char *restrict newvar = "Another string"; + + // Check varargs. + test_varargs ("s, d' f .", "string", 65, 34.234); + test_varargs_macros (); + + // Check flexible array members. + struct incomplete_array *ia = + malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); + ia->datasize = 10; + for (int i = 0; i < ia->datasize; ++i) + ia->data[i] = i * 1.234; + + // Check named initializers. + struct named_init ni = { + .number = 34, + .name = L"Test wide string", + .average = 543.34343, + }; + + ni.number = 58; + + int dynamic_array[ni.number]; + dynamic_array[ni.number - 1] = 543; + + // work around unused variable warnings + return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' + || dynamic_array[ni.number - 1] != 543); + + ; + return 0; +} +_ACEOF +for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99 +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c99=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c99" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c99" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c99" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +$as_echo "$ac_cv_prog_cc_c99" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c99" != xno; then : + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 +else + ac_cv_prog_cc_stdc=no +fi + +fi + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5 +$as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; } + if ${ac_cv_prog_cc_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +fi + + case $ac_cv_prog_cc_stdc in #( + no) : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; #( + '') : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; #( + *) : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5 +$as_echo "$ac_cv_prog_cc_stdc" >&6; } ;; +esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar lib "link -lib" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar lib "link -lib" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5 +$as_echo_n "checking the archiver ($AR) interface... " >&6; } +if ${am_cv_ar_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + am_cv_ar_interface=ar + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int some_variable = 0; +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5 + (eval $am_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5 + (eval $am_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5 +$as_echo "$am_cv_ar_interface" >&6; } + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + as_fn_error $? "could not determine $AR interface" "$LINENO" 5 + ;; +esac + + +# Check if LD supports linker scripts, +# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. +# Check whether --enable-ld-version-script was given. +if test "${enable_ld_version_script+set}" = set; then : + enableval=$enable_ld_version_script; have_ld_version_script=$enableval +fi + +if test -z "$have_ld_version_script"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if LD -Wl,--version-script works" >&5 +$as_echo_n "checking if LD -Wl,--version-script works... " >&6; } + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + cat > conftest.map <conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + have_ld_version_script=yes +else + have_ld_version_script=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + rm -f conftest.map + LDFLAGS="$save_LDFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_ld_version_script" >&5 +$as_echo "$have_ld_version_script" >&6; } +fi + if test "$have_ld_version_script" = "yes"; then + HAVE_LD_VERSION_SCRIPT_TRUE= + HAVE_LD_VERSION_SCRIPT_FALSE='#' +else + HAVE_LD_VERSION_SCRIPT_TRUE='#' + HAVE_LD_VERSION_SCRIPT_FALSE= +fi + + +# See if compiler supports prototypes. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 +$as_echo_n "checking for function prototypes... " >&6; } +if ${ijg_cv_have_prototypes+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int testfunction (int arg1, int * arg2); /* check prototypes */ +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; +int testfunction (int arg1, int * arg2) /* check definitions */ +{ return arg2[arg1]; } +int test2function (void) /* check void arg list */ +{ return 0; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_have_prototypes=yes +else + ijg_cv_have_prototypes=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_have_prototypes" >&5 +$as_echo "$ijg_cv_have_prototypes" >&6; } +if test $ijg_cv_have_prototypes = yes; then + +$as_echo "#define HAVE_PROTOTYPES 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your compiler does not seem to know about function prototypes. + Perhaps it needs a special switch to enable ANSI C mode. + If so, we recommend running configure like this: + ./configure CC='cc -switch' + where -switch is the proper switch." >&5 +$as_echo "$as_me: WARNING: Your compiler does not seem to know about function prototypes. + Perhaps it needs a special switch to enable ANSI C mode. + If so, we recommend running configure like this: + ./configure CC='cc -switch' + where -switch is the proper switch." >&2;} +fi + +# Check header files + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in stddef.h stdlib.h locale.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" +if test "x$ac_cv_header_string_h" = xyes; then : + +else + +$as_echo "#define NEED_BSD_STRINGS 1" >>confdefs.h + +fi + + + +# See whether type size_t is defined in any ANSI-standard places; +# if not, perhaps it is defined in . +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for size_t" >&5 +$as_echo_n "checking for size_t... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDDEF_H +#include +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif +typedef size_t my_size_t; + +int +main () +{ + my_size_t foovar; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_size_t_ok=yes +else + ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 +$as_echo "$ijg_size_t_ok" >&6; } +if test "$ijg_size_t_ok" != yes; then + ac_fn_c_check_header_mongrel "$LINENO" "sys/types.h" "ac_cv_header_sys_types_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_types_h" = xyes; then : + +$as_echo "#define NEED_SYS_TYPES_H 1" >>confdefs.h + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "size_t" >/dev/null 2>&1; then : + ijg_size_t_ok="size_t is in sys/types.h" +else + ijg_size_t_ok=no +fi +rm -f conftest* + +else + ijg_size_t_ok=no +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 +$as_echo "$ijg_size_t_ok" >&6; } + if test "$ijg_size_t_ok" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Type size_t is not defined in any of the usual places. + Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&5 +$as_echo "$as_me: WARNING: Type size_t is not defined in any of the usual places. + Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&2;} + fi +fi + +# Check compiler characteristics +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned char" >&5 +$as_echo_n "checking for type unsigned char... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + unsigned char un_char; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define HAVE_UNSIGNED_CHAR 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned short" >&5 +$as_echo_n "checking for type unsigned short... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + unsigned short un_short; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define HAVE_UNSIGNED_SHORT 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type void" >&5 +$as_echo_n "checking for type void... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Caution: a C++ compiler will insist on valid prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define void char" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + + +# Check for non-broken inline under various spellings +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +ijg_cv_inline="" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} __inline__ int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="__inline__" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} __inline int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="__inline" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} inline int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="inline" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_inline" >&5 +$as_echo "$ijg_cv_inline" >&6; } + +cat >>confdefs.h <<_ACEOF +#define INLINE $ijg_cv_inline +_ACEOF + + +# We cannot check for bogus warnings, but at least we can check for errors +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken incomplete types" >&5 +$as_echo_n "checking for broken incomplete types... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + typedef struct undefined_structure * undef_struct_ptr; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: broken" >&5 +$as_echo "broken" >&6; } + +$as_echo "#define INCOMPLETE_TYPES_BROKEN 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +# Test whether global names are unique to at least 15 chars +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for short external names" >&5 +$as_echo_n "checking for short external names... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int possibly_duplicate_function () { return 0; } +int possibly_dupli_function () { return 1; } + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: short" >&5 +$as_echo "short" >&6; } + +$as_echo "#define NEED_SHORT_EXTERNAL_NAMES 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +# Run-time checks +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if char is signed" >&5 +$as_echo_n "checking to see if char is signed... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient." >&5 +$as_echo "$as_me: WARNING: Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient." >&2;} + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} +char signed_char_check = (char) (-67); +int main() { + exit(is_char_signed((int) signed_char_check)); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define CHAR_IS_UNSIGNED 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if right shift is signed" >&5 +$as_echo_n "checking to see if right shift is signed... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that right shift is signed on target machine." >&5 +$as_echo "Assuming that right shift is signed on target machine." >&6; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} +int main() { + exit(is_shifting_signed(-0x7F7E80B1L)); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define RIGHT_SHIFT_IS_UNSIGNED 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if fopen accepts b spec" >&5 +$as_echo_n "checking to see if fopen accepts b spec... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that it does." >&5 +$as_echo "Assuming that it does." >&6; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +int main() { + if (fopen("conftestdata", "wb") != NULL) + exit(0); + exit(1); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define DONT_USE_B_MODE 1" >>confdefs.h + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +# Configure libtool +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.6' +macro_revision='2.4.6' + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n "$lt_cv_sys_max_cmd_len"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test yes != "$GCC"; then + reload_cmds=false + fi + ;; + darwin*) + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + pic_mode=default +fi + + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC=$CC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='$wl--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test no = "$ld_shlibs"; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + export_dynamic_flag_spec='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + else + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + osf3*) + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='$wl-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='$wl-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test no = "$ld_shlibs" && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + + + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test yes = "$hardcode_automatic"; then + + # We can hardcode non-existent directories. + if test no != "$hardcode_direct" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen=shl_load +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen=dlopen +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report what library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +# Select memory manager depending on user input. +# If no "-enable-maxmem", use jmemnobs +MEMORYMGR='jmemnobs' +MAXMEM="no" +# Check whether --enable-maxmem was given. +if test "${enable_maxmem+set}" = set; then : + enableval=$enable_maxmem; MAXMEM="$enableval" +fi + +if test "x$MAXMEM" = xyes; then + MAXMEM=1 +fi +if test "x$MAXMEM" != xno; then + if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then + as_fn_error $? "non-numeric argument to --enable-maxmem" "$LINENO" 5 + fi + DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` + +cat >>confdefs.h <<_ACEOF +#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM} +_ACEOF + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'tmpfile()'" >&5 +$as_echo_n "checking for 'tmpfile()'... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + FILE * tfile = tmpfile(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + MEMORYMGR='jmemansi' +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + MEMORYMGR='jmemname' + + # Test for the need to remove temporary files using a signal handler + # (for cjpeg/djpeg) + +$as_echo "#define NEED_SIGNAL_CATCHER 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'mktemp()'" >&5 +$as_echo_n "checking for 'mktemp()'... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + char fname[80]; mktemp(fname); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define NO_MKTEMP 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi + + +# Extract the library version IDs from jpeglib.h. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libjpeg version number" >&5 +$as_echo_n "checking libjpeg version number... " >&6; } +major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +JPEG_LIB_VERSION=`expr $major + $minor`:0:$minor + +JPEG_LIB_VERSION_MAJOR=$major + +JPEG_LIB_VERSION_MINOR=$minor + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $major.$minor.0" >&5 +$as_echo "$major.$minor.0" >&6; } + +ac_config_files="$ac_config_files Makefile libjpeg.pc" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libjpeg $as_me 9.4.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libjpeg config.status 9.4.0 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in AS \ +DLLTOOL \ +OBJDUMP \ +SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ +nm_file_list_spec \ +lt_cv_truncate_bin \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' + +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "jconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS jconfig.h:jconfig.cfg" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "libjpeg.pc") CONFIG_FILES="$CONFIG_FILES libjpeg.pc" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in #( + *\'*) : + eval set x "$CONFIG_FILES" ;; #( + *) : + set x $CONFIG_FILES ;; #( + *) : + ;; +esac + shift + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf + do + # Strip MF so we end up with the name of the file. + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? + done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + + +# The names of the tagged configurations supported by this script. +available_tags='' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG + +# Assembler program. +AS=$lt_AS + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Object dumper program. +OBJDUMP=$lt_OBJDUMP + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and where our libraries should be installed. +lt_sysroot=$lt_sysroot + +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \$shlibpath_var if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain=$ac_aux_dir/ltmain.sh + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/jpeg-9d/configure.ac b/jpeg-9d/configure.ac new file mode 100644 index 0000000..eb3eeed --- /dev/null +++ b/jpeg-9d/configure.ac @@ -0,0 +1,366 @@ +# IJG auto-configuration source file. +# Process this file with autoconf to produce a configure script. + +# +# Configure script for IJG libjpeg +# + +AC_INIT([libjpeg], [9.4.0]) + +# Directory where autotools helper scripts lives. +AC_CONFIG_AUX_DIR([.]) + +# Generate configuration headers. +AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg]) + +# Hack: disable autoheader so that it doesn't overwrite our cfg template. +AUTOHEADER="echo autoheader ignored" + +# Check system type +AC_CANONICAL_TARGET + +# Initialize Automake +# Don't require all the GNU mandated files +AM_INIT_AUTOMAKE([-Wall -Werror no-dist foreign]) + +# Make --enable-silent-rules the default. +# To get verbose build output you may configure +# with --disable-silent-rules or use "make V=1". +AM_SILENT_RULES([yes]) + +# Add configure option --enable-maintainer-mode which enables +# dependency checking and generation useful to package maintainers. +# This is made an option to avoid confusing end users. +AM_MAINTAINER_MODE + +# Check for programs +AC_PROG_CC +AC_PROG_CC_STDC +AC_PROG_CPP +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S +AM_PROG_AR + +# Check if LD supports linker scripts, +# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. +AC_ARG_ENABLE([ld-version-script], + AS_HELP_STRING([--enable-ld-version-script], + [enable linker version script (default is enabled when possible)]), + [have_ld_version_script=$enableval], []) +if test -z "$have_ld_version_script"; then + AC_MSG_CHECKING([if LD -Wl,--version-script works]) + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + cat > conftest.map < rather than standard .])]) + +# See whether type size_t is defined in any ANSI-standard places; +# if not, perhaps it is defined in . +AC_MSG_CHECKING([for size_t]) +AC_TRY_COMPILE([ +#ifdef HAVE_STDDEF_H +#include +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif +typedef size_t my_size_t; +], + [ my_size_t foovar; ], + [ijg_size_t_ok=yes], + [ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"]) +AC_MSG_RESULT([$ijg_size_t_ok]) +if test "$ijg_size_t_ok" != yes; then + AC_CHECK_HEADER([sys/types.h], + [AC_DEFINE([NEED_SYS_TYPES_H], [1], + [Need to include in order to obtain size_t.]) + AC_EGREP_CPP([size_t], [#include ], + [ijg_size_t_ok="size_t is in sys/types.h"], + [ijg_size_t_ok=no])], + [ijg_size_t_ok=no]) + AC_MSG_RESULT([$ijg_size_t_ok]) + if test "$ijg_size_t_ok" = no; then + AC_MSG_WARN([Type size_t is not defined in any of the usual places. + Try putting '"typedef unsigned int size_t;"' in jconfig.h.]) + fi +fi + +# Check compiler characteristics +AC_MSG_CHECKING([for type unsigned char]) +AC_TRY_COMPILE([], [ unsigned char un_char; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_UNSIGNED_CHAR], [1], + [Compiler supports 'unsigned char'.])], + [AC_MSG_RESULT(no)]) + +AC_MSG_CHECKING([for type unsigned short]) +AC_TRY_COMPILE([], [ unsigned short un_short; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_UNSIGNED_SHORT], [1], + [Compiler supports 'unsigned short'.])], + [AC_MSG_RESULT(no)]) + +AC_MSG_CHECKING([for type void]) +AC_TRY_COMPILE([ +/* Caution: a C++ compiler will insist on valid prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +], [ ], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([void], [char], + [Define 'void' as 'char' for archaic compilers + that don't understand it.])]) +AC_C_CONST + +# Check for non-broken inline under various spellings +AC_MSG_CHECKING([for inline]) +ijg_cv_inline="" +AC_TRY_COMPILE([], [} __inline__ int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="__inline__", +[AC_TRY_COMPILE(, [} __inline int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="__inline", +[AC_TRY_COMPILE(, [} inline int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="inline")])]) +AC_MSG_RESULT($ijg_cv_inline) +AC_DEFINE_UNQUOTED([INLINE], [$ijg_cv_inline], + [How to obtain function inlining.]) + +# We cannot check for bogus warnings, but at least we can check for errors +AC_MSG_CHECKING([for broken incomplete types]) +AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], + [], + [AC_MSG_RESULT(ok)], + [AC_MSG_RESULT(broken) + AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1], + [Compiler does not support pointers to unspecified + structures.])]) + +# Test whether global names are unique to at least 15 chars +AC_MSG_CHECKING([for short external names]) +AC_TRY_LINK([ +int possibly_duplicate_function () { return 0; } +int possibly_dupli_function () { return 1; } +], [], + [AC_MSG_RESULT(ok)], + [AC_MSG_RESULT(short) + AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], [1], + [Linker requires that global names be unique in + first 15 characters.])]) + +# Run-time checks +AC_MSG_CHECKING([to see if char is signed]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} +char signed_char_check = (char) (-67); +int main() { + exit(is_char_signed((int) signed_char_check)); +}], [AC_MSG_RESULT(no) + AC_DEFINE([CHAR_IS_UNSIGNED], [1], + [Characters are unsigned])], + [AC_MSG_RESULT(yes)], +[AC_MSG_WARN([Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient.]) +]) + +AC_MSG_CHECKING([to see if right shift is signed]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} +int main() { + exit(is_shifting_signed(-0x7F7E80B1L)); +}], + [AC_MSG_RESULT(no) + AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], [1], + [Broken compiler shifts signed values as an unsigned shift.])], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)]) + +AC_MSG_CHECKING([to see if fopen accepts b spec]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +int main() { + if (fopen("conftestdata", "wb") != NULL) + exit(0); + exit(1); +}], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([DONT_USE_B_MODE], [1], + [Don't open files in binary mode.])], + [AC_MSG_RESULT(Assuming that it does.)]) + +# Configure libtool +AC_LIBTOOL_WIN32_DLL +AC_PROG_LIBTOOL + +# Select memory manager depending on user input. +# If no "-enable-maxmem", use jmemnobs +MEMORYMGR='jmemnobs' +MAXMEM="no" +AC_ARG_ENABLE([maxmem], +[ --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB], +[MAXMEM="$enableval"]) +dnl [# support --with-maxmem for backwards compatibility with IJG V5.] +dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval") +if test "x$MAXMEM" = xyes; then + MAXMEM=1 +fi +if test "x$MAXMEM" != xno; then + if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then + AC_MSG_ERROR(non-numeric argument to --enable-maxmem) + fi + DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` + AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}], + [Maximum data space library will allocate.]) + AC_MSG_CHECKING([for 'tmpfile()']) + AC_TRY_LINK([#include ], [ FILE * tfile = tmpfile(); ], + [AC_MSG_RESULT(yes) + MEMORYMGR='jmemansi'], + [AC_MSG_RESULT(no) + dnl if tmpfile is not present, must use jmemname. + MEMORYMGR='jmemname' + + # Test for the need to remove temporary files using a signal handler + # (for cjpeg/djpeg) + AC_DEFINE([NEED_SIGNAL_CATCHER], [1], + [Need signal handler to clean up temporary files.]) + AC_MSG_CHECKING([for 'mktemp()']) + AC_TRY_LINK([], [ char fname[80]; mktemp(fname); ], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([NO_MKTEMP], [1], + [The mktemp() function is not available.])])]) +fi +AC_SUBST([MEMORYMGR]) + +# Extract the library version IDs from jpeglib.h. +AC_MSG_CHECKING([libjpeg version number]) +[major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`] +AC_SUBST([JPEG_LIB_VERSION], [`expr $major + $minor`:0:$minor]) +AC_SUBST([JPEG_LIB_VERSION_MAJOR], [$major]) +AC_SUBST([JPEG_LIB_VERSION_MINOR], [$minor]) +AC_MSG_RESULT([$major.$minor.0]) + +AC_CONFIG_FILES([Makefile libjpeg.pc]) +AC_OUTPUT diff --git a/jpeg-9d/depcomp b/jpeg-9d/depcomp new file mode 100644 index 0000000..65cbf70 --- /dev/null +++ b/jpeg-9d/depcomp @@ -0,0 +1,791 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2018-03-07.03; # UTC + +# Copyright (C) 1999-2018 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Avoid interferences from the environment. +gccflag= dashmflag= + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The second -e expression handles DOS-style file names with drive + # letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\' : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi + + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + echo >> "$depfile" # make sure the fragment doesn't end with a backslash + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff --git a/jpeg-9d/djpeg.1 b/jpeg-9d/djpeg.1 new file mode 100644 index 0000000..1cb364f --- /dev/null +++ b/jpeg-9d/djpeg.1 @@ -0,0 +1,264 @@ +.TH DJPEG 1 "28 April 2019" +.SH NAME +djpeg \- decompress a JPEG file to an image file +.SH SYNOPSIS +.B djpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B djpeg +decompresses the named JPEG file, or the standard input if no file is named, +and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP, +GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. +(RLE is supported only if the URT library is available, which it isn't +on most non-Unix systems.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-colors " N" +Reduce image to at most N colors. This reduces the number of colors used in +the output image, so that it can be displayed on a colormapped display or +stored in a colormapped file format. For example, if you have an 8-bit +display, you'd need to reduce to 256 or fewer colors. +.TP +.BI \-quantize " N" +Same as +.BR \-colors . +.B \-colors +is the recommended name, +.B \-quantize +is provided only for backwards compatibility. +.TP +.B \-fast +Select recommended processing options for fast, low quality output. (The +default options are chosen for highest quality output.) Currently, this is +equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR. +.TP +.B \-grayscale +Force grayscale output even if JPEG file is color. +Useful for viewing on monochrome displays; also, +.B djpeg +runs noticeably faster in this mode. +.TP +.B \-rgb +Force RGB output even if JPEG file is grayscale. +This is provided to support applications that don't +want to cope with grayscale as a separate case. +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for +baseline JPEG. If the /N part is omitted, then M specifies the DCT scaled +size to be applied on the given input. For baseline JPEG this is equivalent +to M/8 scaling, since the source DCT size for baseline JPEG is 8. +Scaling is handy if the image is larger than your screen; also, +.B djpeg +runs much faster when scaling down the output. +.TP +.B \-bmp +Select BMP output format (Windows flavor). +8-bit colormapped format is emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-gif +Select GIF output format (LZW compressed). +Since GIF does not support more than 256 colors, +.B \-colors 256 +is assumed (unless you specify a smaller number of colors). If you specify +.BR \-fast , +the default number of colors is 216. +.TP +.B \-gif0 +Select GIF output format (uncompressed). +Since GIF does not support more than 256 colors, +.B \-colors 256 +is assumed (unless you specify a smaller number of colors). If you specify +.BR \-fast , +the default number of colors is 216. +.TP +.B \-os2 +Select BMP output format (OS/2 1.x flavor). +8-bit colormapped format is emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-pnm +Select PBMPLUS (PPM/PGM) output format (this is the default format). +PGM is emitted if the JPEG file is grayscale or if +.B \-grayscale +is specified; otherwise PPM is emitted. +.TP +.B \-rle +Select RLE output format. (Requires URT library.) +.TP +.B \-targa +Select Targa output format. Grayscale format is emitted if the JPEG file is +grayscale or if +.B \-grayscale +is specified; otherwise, colormapped format is emitted if +.B \-colors +is specified; otherwise, 24-bit full-color format is emitted. +.PP +Switches for advanced users: +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-dither fs +Use Floyd-Steinberg dithering in color quantization. +.TP +.B \-dither ordered +Use ordered dithering in color quantization. +.TP +.B \-dither none +Do not use dithering in color quantization. +By default, Floyd-Steinberg dithering is applied when quantizing colors; this +is slow but usually produces the best results. Ordered dither is a compromise +between speed and quality; no dithering is fast but usually looks awful. Note +that these switches have no effect unless color quantization is being done. +Ordered dither is only available in +.B \-onepass +mode. +.TP +.BI \-map " file" +Quantize to the colors used in the specified image file. This is useful for +producing multiple files with identical color maps, or for forcing a +predefined set of colors to be used. The +.I file +must be a GIF or PPM file. This option overrides +.B \-colors +and +.BR \-onepass . +.TP +.B \-nosmooth +Don't use high-quality upsampling. +.TP +.B \-onepass +Use one-pass instead of two-pass color quantization. The one-pass method is +faster and needs less memory, but it produces a lower-quality image. +.B \-onepass +is ignored unless you also say +.B \-colors +.IR N . +Also, the one-pass method is always used for grayscale output (the two-pass +method is no improvement then). +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example decompresses the JPEG file foo.jpg, quantizes it to +256 colors, and saves the output in 8-bit BMP format in foo.bmp: +.IP +.B djpeg \-colors 256 \-bmp +.I foo.jpg +.B > +.I foo.bmp +.SH HINTS +To get a quick preview of an image, use the +.B \-grayscale +and/or +.B \-scale +switches. +.B \-grayscale \-scale 1/8 +is the fastest case. +.PP +Several options are available that trade off image quality to gain speed. +.B \-fast +turns on the recommended settings. +.PP +.B \-dct fast +and/or +.B \-nosmooth +gain speed at a small sacrifice in quality. +When producing a color-quantized image, +.B \-onepass \-dither ordered +is fast but much lower quality than the default behavior. +.B \-dither none +may give acceptable results in two-pass mode, but is seldom tolerable in +one-pass mode. +.PP +If you are fortunate enough to have very fast floating point hardware, +\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most +machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is +not worth using, because its theoretical accuracy advantage is too small to be +significant in practice. +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group diff --git a/jpeg-9d/djpeg.c b/jpeg-9d/djpeg.c new file mode 100644 index 0000000..a01b396 --- /dev/null +++ b/jpeg-9d/djpeg.c @@ -0,0 +1,631 @@ +/* + * djpeg.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for the JPEG decompressor. + * It should work on any system with Unix- or MS-DOS-style command lines. + * + * Two different command line styles are permitted, depending on the + * compile-time switch TWO_FILE_COMMANDLINE: + * djpeg [options] inputfile outputfile + * djpeg [options] [inputfile] + * In the second style, output is always to standard output, which you'd + * normally redirect to a file or pipe to some other program. Input is + * either from a named file or from standard input (typically redirected). + * The second style is convenient on Unix but is unhelpful on systems that + * don't support pipes. Also, you MUST use the first style if your system + * doesn't do binary I/O to stdin/stdout. + * To simplify script writing, the "-outfile" switch is provided. The syntax + * djpeg [options] -outfile outputfile inputfile + * works regardless of which command line style is used. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "jversion.h" /* for version message */ + +#include /* to declare isprint() */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* Create the add-on message string table. */ + +#define JMESSAGE(code,string) string , + +static const char * const cdjpeg_message_table[] = { +#include "cderror.h" + NULL +}; + + +/* + * This list defines the known output image formats + * (not all of which need be supported by a given version). + * You can change the default output format by defining DEFAULT_FMT; + * indeed, you had better do so if you undefine PPM_SUPPORTED. + */ + +typedef enum { + FMT_BMP, /* BMP format (Windows flavor) */ + FMT_GIF, /* GIF format (LZW compressed) */ + FMT_GIF0, /* GIF format (uncompressed) */ + FMT_OS2, /* BMP format (OS/2 flavor) */ + FMT_PPM, /* PPM/PGM (PBMPLUS formats) */ + FMT_RLE, /* RLE format */ + FMT_TARGA, /* Targa format */ + FMT_TIFF /* TIFF format */ +} IMAGE_FORMATS; + +#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */ +#define DEFAULT_FMT FMT_PPM +#endif + +static IMAGE_FORMATS requested_fmt; + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -colors N Reduce image to no more than N colors\n"); + fprintf(stderr, " -fast Fast, low-quality processing\n"); + fprintf(stderr, " -grayscale Force grayscale output\n"); + fprintf(stderr, " -rgb Force RGB output\n"); +#ifdef IDCT_SCALING_SUPPORTED + fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); +#endif +#ifdef BMP_SUPPORTED + fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n", + (DEFAULT_FMT == FMT_BMP ? " (default)" : "")); +#endif +#ifdef GIF_SUPPORTED + fprintf(stderr, " -gif Select GIF output format (LZW compressed)%s\n", + (DEFAULT_FMT == FMT_GIF ? " (default)" : "")); + fprintf(stderr, " -gif0 Select GIF output format (uncompressed)%s\n", + (DEFAULT_FMT == FMT_GIF0 ? " (default)" : "")); +#endif +#ifdef BMP_SUPPORTED + fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n", + (DEFAULT_FMT == FMT_OS2 ? " (default)" : "")); +#endif +#ifdef PPM_SUPPORTED + fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n", + (DEFAULT_FMT == FMT_PPM ? " (default)" : "")); +#endif +#ifdef RLE_SUPPORTED + fprintf(stderr, " -rle Select Utah RLE output format%s\n", + (DEFAULT_FMT == FMT_RLE ? " (default)" : "")); +#endif +#ifdef TARGA_SUPPORTED + fprintf(stderr, " -targa Select Targa output format%s\n", + (DEFAULT_FMT == FMT_TARGA ? " (default)" : "")); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef DCT_ISLOW_SUPPORTED + fprintf(stderr, " -dct int Use integer DCT method%s\n", + (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); +#endif +#ifdef DCT_IFAST_SUPPORTED + fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", + (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); +#endif +#ifdef DCT_FLOAT_SUPPORTED + fprintf(stderr, " -dct float Use floating-point DCT method%s\n", + (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); +#endif + fprintf(stderr, " -dither fs Use F-S dithering (default)\n"); + fprintf(stderr, " -dither none Don't use dithering in quantization\n"); + fprintf(stderr, " -dither ordered Use ordered dither (medium speed, quality)\n"); +#ifdef QUANT_2PASS_SUPPORTED + fprintf(stderr, " -map FILE Map to colors used in named image file\n"); +#endif + fprintf(stderr, " -nosmooth Don't use high-quality upsampling\n"); +#ifdef QUANT_1PASS_SUPPORTED + fprintf(stderr, " -onepass Use 1-pass quantization (fast, low quality)\n"); +#endif + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + exit(EXIT_FAILURE); +} + + +LOCAL(int) +parse_switches (j_decompress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + + /* Set up default JPEG parameters. */ + requested_fmt = DEFAULT_FMT; /* set default output file format */ + outfilename = NULL; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "bmp", 1)) { + /* BMP output format (Windows flavor). */ + requested_fmt = FMT_BMP; + + } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) || + keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) { + /* Do color quantization. */ + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + cinfo->desired_number_of_colors = val; + cinfo->quantize_colors = TRUE; + + } else if (keymatch(arg, "dct", 2)) { + /* Select IDCT algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "int", 1)) { + cinfo->dct_method = JDCT_ISLOW; + } else if (keymatch(argv[argn], "fast", 2)) { + cinfo->dct_method = JDCT_IFAST; + } else if (keymatch(argv[argn], "float", 2)) { + cinfo->dct_method = JDCT_FLOAT; + } else + usage(); + + } else if (keymatch(arg, "dither", 2)) { + /* Select dithering algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "fs", 2)) { + cinfo->dither_mode = JDITHER_FS; + } else if (keymatch(argv[argn], "none", 2)) { + cinfo->dither_mode = JDITHER_NONE; + } else if (keymatch(argv[argn], "ordered", 2)) { + cinfo->dither_mode = JDITHER_ORDERED; + } else + usage(); + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "fast", 1)) { + /* Select recommended processing options for quick-and-dirty output. */ + cinfo->two_pass_quantize = FALSE; + cinfo->dither_mode = JDITHER_ORDERED; + if (! cinfo->quantize_colors) /* don't override an earlier -colors */ + cinfo->desired_number_of_colors = 216; + cinfo->dct_method = JDCT_FASTEST; + cinfo->do_fancy_upsampling = FALSE; + + } else if (keymatch(arg, "gif", 1)) { + /* GIF output format (LZW compressed). */ + requested_fmt = FMT_GIF; + + } else if (keymatch(arg, "gif0", 4)) { + /* GIF output format (uncompressed). */ + requested_fmt = FMT_GIF0; + + } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { + /* Force monochrome output. */ + cinfo->out_color_space = JCS_GRAYSCALE; + + } else if (keymatch(arg, "rgb", 3)) { + /* Force RGB output. */ + cinfo->out_color_space = JCS_RGB; + + } else if (keymatch(arg, "map", 3)) { + /* Quantize to a color map taken from an input file. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (for_real) { /* too expensive to do twice! */ +#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ + FILE * mapfile; + + if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + read_color_map(cinfo, mapfile); + fclose(mapfile); + cinfo->quantize_colors = TRUE; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "nosmooth", 3)) { + /* Suppress fancy upsampling. */ + cinfo->do_fancy_upsampling = FALSE; + + } else if (keymatch(arg, "onepass", 3)) { + /* Use fast one-pass quantization. */ + cinfo->two_pass_quantize = FALSE; + + } else if (keymatch(arg, "os2", 3)) { + /* BMP output format (OS/2 flavor). */ + requested_fmt = FMT_OS2; + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) { + /* PPM/PGM output format. */ + requested_fmt = FMT_PPM; + + } else if (keymatch(arg, "rle", 1)) { + /* RLE output format. */ + requested_fmt = FMT_RLE; + + } else if (keymatch(arg, "scale", 1)) { + /* Scale the output image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%u/%u", + &cinfo->scale_num, &cinfo->scale_denom) < 1) + usage(); + + } else if (keymatch(arg, "targa", 1)) { + /* Targa output format. */ + requested_fmt = FMT_TARGA; + + } else { + usage(); /* bogus switch */ + } + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * Marker processor for COM and interesting APPn markers. + * This replaces the library's built-in processor, which just skips the marker. + * We want to print out the marker as text, to the extent possible. + * Note this code relies on a non-suspending data source. + */ + +LOCAL(unsigned int) +jpeg_getc (j_decompress_ptr cinfo) +/* Read next byte */ +{ + struct jpeg_source_mgr * datasrc = cinfo->src; + + if (datasrc->bytes_in_buffer == 0) { + if (! (*datasrc->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + datasrc->bytes_in_buffer--; + return GETJOCTET(*datasrc->next_input_byte++); +} + + +METHODDEF(boolean) +print_text_marker (j_decompress_ptr cinfo) +{ + boolean traceit = (cinfo->err->trace_level >= 1); + INT32 length; + unsigned int ch; + unsigned int lastch = 0; + + length = jpeg_getc(cinfo) << 8; + length += jpeg_getc(cinfo); + length -= 2; /* discount the length word itself */ + + if (traceit) { + if (cinfo->unread_marker == JPEG_COM) + fprintf(stderr, "Comment, length %ld:\n", (long) length); + else /* assume it is an APPn otherwise */ + fprintf(stderr, "APP%d, length %ld:\n", + cinfo->unread_marker - JPEG_APP0, (long) length); + } + + while (--length >= 0) { + ch = jpeg_getc(cinfo); + if (traceit) { + /* Emit the character in a readable form. + * Nonprintables are converted to \nnn form, + * while \ is converted to \\. + * Newlines in CR, CR/LF, or LF form will be printed as one newline. + */ + if (ch == '\r') { + fprintf(stderr, "\n"); + } else if (ch == '\n') { + if (lastch != '\r') + fprintf(stderr, "\n"); + } else if (ch == '\\') { + fprintf(stderr, "\\\\"); + } else if (isprint(ch)) { + putc(ch, stderr); + } else { + fprintf(stderr, "\\%03o", ch); + } + lastch = ch; + } + } + + if (traceit) + fprintf(stderr, "\n"); + + return TRUE; +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + int file_index; + djpeg_dest_ptr dest_mgr = NULL; + FILE * input_file; + FILE * output_file; + JDIMENSION num_scanlines; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "djpeg"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG decompression object with default error handling. */ + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + /* Add some application-specific error messages (from cderror.h) */ + jerr.addon_message_table = cdjpeg_message_table; + jerr.first_addon_message = JMSG_FIRSTADDONCODE; + jerr.last_addon_message = JMSG_LASTADDONCODE; + + /* Insert custom marker processor for COM and APP12. + * APP12 is used by some digital camera makers for textual info, + * so we provide the ability to display it as text. + * If you like, additional APPn marker types can be selected for display, + * but don't try to override APP0 or APP14 this way (see libjpeg.txt). + */ + jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker); + jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker); + + /* Now safe to enable signal catcher. */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &cinfo); +#endif + + /* Scan command line to find file names. */ + /* It is convenient to use just one switch-parsing routine, but the switch + * values read here are ignored; we will rescan the switches after opening + * the input file. + * (Exception: tracing level set here controls verbosity for COM markers + * found during jpeg_read_header...) + */ + + file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + input_file = read_stdin(); + } + + /* Open the output file. */ + if (outfilename != NULL) { + if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + output_file = write_stdout(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &cinfo, &progress); +#endif + + /* Specify data source for decompression */ + jpeg_stdio_src(&cinfo, input_file); + + /* Read file header, set default decompression parameters */ + (void) jpeg_read_header(&cinfo, TRUE); + + /* Adjust default decompression parameters by re-parsing the options */ + file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); + + /* Initialize the output module now to let it override any crucial + * option settings (for instance, GIF wants to force color quantization). + */ + switch (requested_fmt) { +#ifdef BMP_SUPPORTED + case FMT_BMP: + dest_mgr = jinit_write_bmp(&cinfo, FALSE); + break; + case FMT_OS2: + dest_mgr = jinit_write_bmp(&cinfo, TRUE); + break; +#endif +#ifdef GIF_SUPPORTED + case FMT_GIF: + dest_mgr = jinit_write_gif(&cinfo, TRUE); + break; + case FMT_GIF0: + dest_mgr = jinit_write_gif(&cinfo, FALSE); + break; +#endif +#ifdef PPM_SUPPORTED + case FMT_PPM: + dest_mgr = jinit_write_ppm(&cinfo); + break; +#endif +#ifdef RLE_SUPPORTED + case FMT_RLE: + dest_mgr = jinit_write_rle(&cinfo); + break; +#endif +#ifdef TARGA_SUPPORTED + case FMT_TARGA: + dest_mgr = jinit_write_targa(&cinfo); + break; +#endif + default: + ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT); + } + dest_mgr->output_file = output_file; + + /* Start decompressor */ + (void) jpeg_start_decompress(&cinfo); + + /* Write output file header */ + (*dest_mgr->start_output) (&cinfo, dest_mgr); + + /* Process data */ + while (cinfo.output_scanline < cinfo.output_height) { + num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer, + dest_mgr->buffer_height); + (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines); + } + +#ifdef PROGRESS_REPORT + /* Hack: count final pass as done in case finish_output does an extra pass. + * The library won't have updated completed_passes. + */ + progress.pub.completed_passes = progress.pub.total_passes; +#endif + + /* Finish decompression and release memory. + * I must do it in this order because output module has allocated memory + * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory. + */ + (*dest_mgr->finish_output) (&cinfo, dest_mgr); + (void) jpeg_finish_decompress(&cinfo); + jpeg_destroy_decompress(&cinfo); + + /* Close files, if we opened them */ + if (input_file != stdin) + fclose(input_file); + if (output_file != stdout) + fclose(output_file); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &cinfo); +#endif + + /* All done. */ + exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/jpeg-9d/djpeg.vcxproj b/jpeg-9d/djpeg.vcxproj new file mode 100644 index 0000000..117f995 --- /dev/null +++ b/jpeg-9d/djpeg.vcxproj @@ -0,0 +1,117 @@ + + + + + Release + Win32 + + + Release + x64 + + + + {11043137-B453-4DFA-9010-4D2B9DC1545C} + Win32Proj + djpeg + 10.0 + + + + Application + false + true + Unicode + v142 + + + Application + false + true + Unicode + v142 + + + + + + + + + + + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + $(Configuration)\$(Platform)\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + $(Configuration)\$(Platform)\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/jpeg-9d/djpeg.vcxproj.filters b/jpeg-9d/djpeg.vcxproj.filters new file mode 100644 index 0000000..92f321c --- /dev/null +++ b/jpeg-9d/djpeg.vcxproj.filters @@ -0,0 +1,69 @@ + + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/jpeg-9d/example.c b/jpeg-9d/example.c new file mode 100644 index 0000000..1d6f6cc --- /dev/null +++ b/jpeg-9d/example.c @@ -0,0 +1,433 @@ +/* + * example.c + * + * This file illustrates how to use the IJG code as a subroutine library + * to read or write JPEG image files. You should look at this code in + * conjunction with the documentation file libjpeg.txt. + * + * This code will not do anything useful as-is, but it may be helpful as a + * skeleton for constructing routines that call the JPEG library. + * + * We present these routines in the same coding style used in the JPEG code + * (ANSI function definitions, etc); but you are of course free to code your + * routines in a different style if you prefer. + */ + +#include + +/* + * Include file for users of JPEG library. + * You will need to have included system headers that define at least + * the typedefs FILE and size_t before you can include jpeglib.h. + * (stdio.h is sufficient on ANSI-conforming systems.) + * You may also wish to include "jerror.h". + */ + +#include "jpeglib.h" + +/* + * is used for the optional error recovery mechanism shown in + * the second part of the example. + */ + +#include + + + +/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to feed data into the JPEG compressor. + * We present a minimal version that does not worry about refinements such + * as error recovery (the JPEG code will just exit() if it gets an error). + */ + + +/* + * IMAGE DATA FORMATS: + * + * The standard input image format is a rectangular array of pixels, with + * each pixel having the same number of "component" values (color channels). + * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars). + * If you are working with color data, then the color values for each pixel + * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit + * RGB color. + * + * For this example, we'll assume that this data structure matches the way + * our application has stored the image in memory, so we can just pass a + * pointer to our image buffer. In particular, let's say that the image is + * RGB color and is described by: + */ + +extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */ +extern int image_height; /* Number of rows in image */ +extern int image_width; /* Number of columns in image */ + + +/* + * Sample routine for JPEG compression. We assume that the target file name + * and a compression quality factor are passed in. + */ + +GLOBAL(void) +write_JPEG_file (char * filename, int quality) +{ + /* This struct contains the JPEG compression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + * It is possible to have several such structures, representing multiple + * compression/decompression processes, in existence at once. We refer + * to any one struct (and its associated working data) as a "JPEG object". + */ + struct jpeg_compress_struct cinfo; + /* This struct represents a JPEG error handler. It is declared separately + * because applications often want to supply a specialized error handler + * (see the second half of this file for an example). But here we just + * take the easy way out and use the standard error handler, which will + * print a message on stderr and call exit() if compression fails. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct jpeg_error_mgr jerr; + /* More stuff */ + FILE * outfile; /* target file */ + JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ + int row_stride; /* physical row width in image buffer */ + + /* Step 1: allocate and initialize JPEG compression object */ + + /* We have to set up the error handler first, in case the initialization + * step fails. (Unlikely, but it could happen if you are out of memory.) + * This routine fills in the contents of struct jerr, and returns jerr's + * address which we place into the link field in cinfo. + */ + cinfo.err = jpeg_std_error(&jerr); + /* Now we can initialize the JPEG compression object. */ + jpeg_create_compress(&cinfo); + + /* Step 2: specify data destination (eg, a file) */ + /* Note: steps 2 and 3 can be done in either order. */ + + /* Here we use the library-supplied code to send compressed data to a + * stdio stream. You can also write your own code to do something else. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to write binary files. + */ + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + + /* Step 3: set parameters for compression */ + + /* First we supply a description of the input image. + * Four fields of the cinfo struct must be filled in: + */ + cinfo.image_width = image_width; /* image width and height, in pixels */ + cinfo.image_height = image_height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + /* Now use the library's routine to set default compression parameters. + * (You must set at least cinfo.in_color_space before calling this, + * since the defaults depend on the source color space.) + */ + jpeg_set_defaults(&cinfo); + /* Now you can set any non-default parameters you wish to. + * Here we just illustrate the use of quality (quantization table) scaling: + */ + jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); + + /* Step 4: Start compressor */ + + /* TRUE ensures that we will write a complete interchange-JPEG file. + * Pass TRUE unless you are very sure of what you're doing. + */ + jpeg_start_compress(&cinfo, TRUE); + + /* Step 5: while (scan lines remain to be written) */ + /* jpeg_write_scanlines(...); */ + + /* Here we use the library's state variable cinfo.next_scanline as the + * loop counter, so that we don't have to keep track ourselves. + * To keep things simple, we pass one scanline per call; you can pass + * more if you wish, though. + */ + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + /* jpeg_write_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could pass + * more than one scanline at a time if that's more convenient. + */ + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + + /* Step 6: Finish compression */ + + jpeg_finish_compress(&cinfo); + /* After finish_compress, we can close the output file. */ + fclose(outfile); + + /* Step 7: release JPEG compression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_compress(&cinfo); + + /* And we're done! */ +} + + +/* + * SOME FINE POINTS: + * + * In the above loop, we ignored the return value of jpeg_write_scanlines, + * which is the number of scanlines actually written. We could get away + * with this because we were only relying on the value of cinfo.next_scanline, + * which will be incremented correctly. If you maintain additional loop + * variables then you should be careful to increment them properly. + * Actually, for output to a stdio stream you needn't worry, because + * then jpeg_write_scanlines will write all the lines passed (or else exit + * with a fatal error). Partial writes can only occur if you use a data + * destination module that can demand suspension of the compressor. + * (If you don't know what that's for, you don't need it.) + * + * If the compressor requires full-image buffers (for entropy-coding + * optimization or a multi-scan JPEG file), it will create temporary + * files for anything that doesn't fit within the maximum-memory setting. + * (Note that temp files are NOT needed if you use the default parameters.) + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + * + * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG + * files to be compatible with everyone else's. If you cannot readily read + * your data in that order, you'll need an intermediate array to hold the + * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top + * source data using the JPEG code's internal virtual-array mechanisms. + */ + + + +/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to read data from the JPEG decompressor. + * It's a bit more refined than the above, in that we show: + * (a) how to modify the JPEG library's standard error-reporting behavior; + * (b) how to allocate workspace using the library's memory manager. + * + * Just to make this example a little different from the first one, we'll + * assume that we do not intend to put the whole image into an in-memory + * buffer, but to send it line-by-line someplace else. We need a one- + * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG + * memory manager allocate it for us. This approach is actually quite useful + * because we don't need to remember to deallocate the buffer separately: it + * will go away automatically when the JPEG object is cleaned up. + */ + + +/* + * ERROR HANDLING: + * + * The JPEG library's standard error handler (jerror.c) is divided into + * several "methods" which you can override individually. This lets you + * adjust the behavior without duplicating a lot of code, which you might + * have to update with each future release. + * + * Our example here shows how to override the "error_exit" method so that + * control is returned to the library's caller when a fatal error occurs, + * rather than calling exit() as the standard error_exit method does. + * + * We use C's setjmp/longjmp facility to return control. This means that the + * routine which calls the JPEG library must first execute a setjmp() call to + * establish the return point. We want the replacement error_exit to do a + * longjmp(). But we need to make the setjmp buffer accessible to the + * error_exit routine. To do this, we make a private extension of the + * standard JPEG error handler object. (If we were using C++, we'd say we + * were making a subclass of the regular error handler.) + * + * Here's the extended error handler struct: + */ + +struct my_error_mgr { + struct jpeg_error_mgr pub; /* "public" fields */ + + jmp_buf setjmp_buffer; /* for return to caller */ +}; + +typedef struct my_error_mgr * my_error_ptr; + +/* + * Here's the routine that will replace the standard error_exit method: + */ + +METHODDEF(void) +my_error_exit (j_common_ptr cinfo) +{ + /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */ + my_error_ptr myerr = (my_error_ptr) cinfo->err; + + /* Always display the message. */ + /* We could postpone this until after returning, if we chose. */ + (*cinfo->err->output_message) (cinfo); + + /* Return control to the setjmp point */ + longjmp(myerr->setjmp_buffer, 1); +} + + +/* + * Sample routine for JPEG decompression. We assume that the source file name + * is passed in. We want to return 1 on success, 0 on error. + */ + + +GLOBAL(int) +read_JPEG_file (char * filename) +{ + /* This struct contains the JPEG decompression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + */ + struct jpeg_decompress_struct cinfo; + /* We use our private extension JPEG error handler. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct my_error_mgr jerr; + /* More stuff */ + FILE * infile; /* source file */ + JSAMPARRAY buffer; /* Output row buffer */ + int row_stride; /* physical row width in output buffer */ + + /* In this example we want to open the input file before doing anything else, + * so that the setjmp() error recovery below can assume the file is open. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to read binary files. + */ + + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + return 0; + } + + /* Step 1: allocate and initialize JPEG decompression object */ + + /* We set up the normal JPEG error routines, then override error_exit. */ + cinfo.err = jpeg_std_error(&jerr.pub); + jerr.pub.error_exit = my_error_exit; + /* Establish the setjmp return context for my_error_exit to use. */ + if (setjmp(jerr.setjmp_buffer)) { + /* If we get here, the JPEG code has signaled an error. + * We need to clean up the JPEG object, close the input file, and return. + */ + jpeg_destroy_decompress(&cinfo); + fclose(infile); + return 0; + } + /* Now we can initialize the JPEG decompression object. */ + jpeg_create_decompress(&cinfo); + + /* Step 2: specify data source (eg, a file) */ + + jpeg_stdio_src(&cinfo, infile); + + /* Step 3: read file parameters with jpeg_read_header() */ + + (void) jpeg_read_header(&cinfo, TRUE); + /* We can ignore the return value from jpeg_read_header since + * (a) suspension is not possible with the stdio data source, and + * (b) we passed TRUE to reject a tables-only JPEG file as an error. + * See libjpeg.txt for more info. + */ + + /* Step 4: set parameters for decompression */ + + /* In this example, we don't need to change any of the defaults set by + * jpeg_read_header(), so we do nothing here. + */ + + /* Step 5: Start decompressor */ + + (void) jpeg_start_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* We may need to do some setup of our own at this point before reading + * the data. After jpeg_start_decompress() we have the correct scaled + * output image dimensions available, as well as the output colormap + * if we asked for color quantization. + * In this example, we need to make an output work buffer of the right size. + */ + /* JSAMPLEs per row in output buffer */ + row_stride = cinfo.output_width * cinfo.output_components; + /* Make a one-row-high sample array that will go away when done with image */ + buffer = (*cinfo.mem->alloc_sarray) + ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1); + + /* Step 6: while (scan lines remain to be read) */ + /* jpeg_read_scanlines(...); */ + + /* Here we use the library's state variable cinfo.output_scanline as the + * loop counter, so that we don't have to keep track ourselves. + */ + while (cinfo.output_scanline < cinfo.output_height) { + /* jpeg_read_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could ask for + * more than one scanline at a time if that's more convenient. + */ + (void) jpeg_read_scanlines(&cinfo, buffer, 1); + /* Assume put_scanline_someplace wants a pointer and sample count. */ + put_scanline_someplace(buffer[0], row_stride); + } + + /* Step 7: Finish decompression */ + + (void) jpeg_finish_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* Step 8: Release JPEG decompression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_decompress(&cinfo); + + /* After finish_decompress, we can close the input file. + * Here we postpone it until after no more JPEG errors are possible, + * so as to simplify the setjmp error logic above. (Actually, I don't + * think that jpeg_destroy can do an error exit, but why assume anything...) + */ + fclose(infile); + + /* At this point you may want to check to see whether any corrupt-data + * warnings occurred (test whether jerr.pub.num_warnings is nonzero). + */ + + /* And we're done! */ + return 1; +} + + +/* + * SOME FINE POINTS: + * + * In the above code, we ignored the return value of jpeg_read_scanlines, + * which is the number of scanlines actually read. We could get away with + * this because we asked for only one line at a time and we weren't using + * a suspending data source. See libjpeg.txt for more info. + * + * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress(); + * we should have done it beforehand to ensure that the space would be + * counted against the JPEG max_memory setting. In some systems the above + * code would risk an out-of-memory error. However, in general we don't + * know the output image dimensions before jpeg_start_decompress(), unless we + * call jpeg_calc_output_dimensions(). See libjpeg.txt for more about this. + * + * Scanlines are returned in the same order as they appear in the JPEG file, + * which is standardly top-to-bottom. If you must emit data bottom-to-top, + * you can use one of the virtual arrays provided by the JPEG memory manager + * to invert the data. See wrbmp.c for an example. + * + * As with compression, some operating modes may require temporary files. + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + */ diff --git a/jpeg-9d/filelist.txt b/jpeg-9d/filelist.txt new file mode 100644 index 0000000..86def45 --- /dev/null +++ b/jpeg-9d/filelist.txt @@ -0,0 +1,216 @@ +IJG JPEG LIBRARY: FILE LIST + +Copyright (C) 1994-2019, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Here is a road map to the files in the IJG JPEG distribution. The +distribution includes the JPEG library proper, plus two application +programs ("cjpeg" and "djpeg") which use the library to convert JPEG +files to and from some other popular image formats. A third application +"jpegtran" uses the library to do lossless conversion between different +variants of JPEG. There are also two stand-alone applications, +"rdjpgcom" and "wrjpgcom". + + +THE JPEG LIBRARY +================ + +Include files: + +jpeglib.h JPEG library's exported data and function declarations. +jconfig.h Configuration declarations. Note: this file is not present + in the distribution; it is generated during installation. +jmorecfg.h Additional configuration declarations; need not be changed + for a standard installation. +jerror.h Declares JPEG library's error and trace message codes. +jinclude.h Central include file used by all IJG .c files to reference + system include files. +jpegint.h JPEG library's internal data structures. +jdct.h Private declarations for forward & reverse DCT subsystems. +jmemsys.h Private declarations for memory management subsystem. +jversion.h Version information. + +Applications using the library should include jpeglib.h (which in turn +includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included +if the application needs to reference individual JPEG error codes. The +other include files are intended for internal use and would not normally +be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, +since its function is to improve portability of the whole IJG distribution. +Most other applications will directly include the system include files they +want, and hence won't need jinclude.h.) + + +C source code files: + +These files contain most of the functions intended to be called directly by +an application program: + +jcapimin.c Application program interface: core routines for compression. +jcapistd.c Application program interface: standard compression. +jdapimin.c Application program interface: core routines for decompression. +jdapistd.c Application program interface: standard decompression. +jcomapi.c Application program interface routines common to compression + and decompression. +jcparam.c Compression parameter setting helper routines. +jctrans.c API and library routines for transcoding compression. +jdtrans.c API and library routines for transcoding decompression. + +Compression side of the library: + +jcinit.c Initialization: determines which other modules to use. +jcmaster.c Master control: setup and inter-pass sequencing logic. +jcmainct.c Main buffer controller (preprocessor => JPEG compressor). +jcprepct.c Preprocessor buffer controller. +jccoefct.c Buffer controller for DCT coefficient buffer. +jccolor.c Color space conversion. +jcsample.c Downsampling. +jcdctmgr.c DCT manager (DCT implementation selection & control). +jfdctint.c Forward DCT using slow-but-accurate integer method. +jfdctfst.c Forward DCT using faster, less accurate integer method. +jfdctflt.c Forward DCT using floating-point arithmetic. +jchuff.c Huffman entropy coding. +jcarith.c Arithmetic entropy coding. +jcmarker.c JPEG marker writing. +jdatadst.c Data destination managers for memory and stdio output. + +Decompression side of the library: + +jdmaster.c Master control: determines which other modules to use. +jdinput.c Input controller: controls input processing modules. +jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). +jdcoefct.c Buffer controller for DCT coefficient buffer. +jdpostct.c Postprocessor buffer controller. +jdmarker.c JPEG marker reading. +jdhuff.c Huffman entropy decoding. +jdarith.c Arithmetic entropy decoding. +jddctmgr.c IDCT manager (IDCT implementation selection & control). +jidctint.c Inverse DCT using slow-but-accurate integer method. +jidctfst.c Inverse DCT using faster, less accurate integer method. +jidctflt.c Inverse DCT using floating-point arithmetic. +jdsample.c Upsampling. +jdcolor.c Color space conversion. +jdmerge.c Merged upsampling/color conversion (faster, lower quality). +jquant1.c One-pass color quantization using a fixed-spacing colormap. +jquant2.c Two-pass color quantization using a custom-generated colormap. + Also handles one-pass quantization to an externally given map. +jdatasrc.c Data source managers for memory and stdio input. + +Support files for both compression and decompression: + +jaricom.c Tables for common use in arithmetic entropy encoding and + decoding routines. +jerror.c Standard error handling routines (application replaceable). +jmemmgr.c System-independent (more or less) memory management code. +jutils.c Miscellaneous utility routines. + +jmemmgr.c relies on a system-dependent memory management module. The IJG +distribution includes the following implementations of the system-dependent +module: + +jmemnobs.c "No backing store": assumes adequate virtual memory exists. +jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). +jmemname.c Makes temporary files with program-generated file names. +jmemdos.c Custom implementation for MS-DOS (16-bit environment only): + can use extended and expanded memory as well as temp files. +jmemmac.c Custom implementation for Apple Macintosh. + +Exactly one of the system-dependent modules should be configured into an +installed JPEG library (see install.txt for hints about which one to use). +On unusual systems you may find it worthwhile to make a special +system-dependent memory manager. + + +Non-C source code files: + +jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in + MS-DOS-specific configurations of the JPEG library. + + +CJPEG/DJPEG/JPEGTRAN +==================== + +Include files: + +cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. +cderror.h Additional error and trace message codes for cjpeg et al. +transupp.h Declarations for jpegtran support routines in transupp.c. + +C source code files: + +cjpeg.c Main program for cjpeg. +djpeg.c Main program for djpeg. +jpegtran.c Main program for jpegtran. +cdjpeg.c Utility routines used by all three programs. +rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. +rdswitch.c Code to process some of cjpeg's more complex switches. + Also used by jpegtran. +transupp.c Support code for jpegtran: lossless image manipulations. + +Image file reader modules for cjpeg: + +rdbmp.c BMP file input. +rdgif.c GIF file input. +rdppm.c PPM/PGM file input. +rdrle.c Utah RLE file input. +rdtarga.c Targa file input. + +Image file writer modules for djpeg: + +wrbmp.c BMP file output. +wrgif.c GIF file output. +wrppm.c PPM/PGM file output. +wrrle.c Utah RLE file output. +wrtarga.c Targa file output. + + +RDJPGCOM/WRJPGCOM +================= + +C source code files: + +rdjpgcom.c Stand-alone rdjpgcom application. +wrjpgcom.c Stand-alone wrjpgcom application. + +These programs do not depend on the IJG library. They do use +jconfig.h and jinclude.h, only to improve portability. + + +ADDITIONAL FILES +================ + +Documentation (see README for a guide to the documentation files): + +README Master documentation file. +*.txt Other documentation files. +*.1 Documentation in Unix man page format. +change.log Version-to-version change highlights. +example.c Sample code for calling JPEG library. + +Configuration/installation files and programs (see install.txt for more info): + +configure Unix shell script to perform automatic configuration. +configure.ac Source file for use with Autoconf to generate configure. +ltmain.sh Support scripts for configure (from GNU libtool). +config.guess +config.sub +depcomp +missing +ar-lib +compile +install-sh Install shell script for those Unix systems lacking one. +Makefile.in Makefile input for configure. +Makefile.am Source file for use with Automake to generate Makefile.in. +ckconfig.c Program to generate jconfig.h on non-Unix systems. +jconfig.txt Template for making jconfig.h by hand. +mak*.* Sample makefiles for particular systems. +jconfig.* Sample jconfig.h for particular systems. +libjpeg.map Script to generate shared library with versioned symbols. +libjpeg.pc.in libjpeg.pc pkg-config file input for configure. +aclocal.m4 M4 macro definitions for use with Autoconf. + +Test files (see install.txt for test procedure): + +test*.* Source and comparison files for confidence test. + These are binary image files, NOT text files. diff --git a/jpeg-9d/install-sh b/jpeg-9d/install-sh new file mode 100644 index 0000000..8175c64 --- /dev/null +++ b/jpeg-9d/install-sh @@ -0,0 +1,518 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2018-03-11.20; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# 'make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +tab=' ' +nl=' +' +IFS=" $tab$nl" + +# Set DOITPROG to "echo" to test this script. + +doit=${DOITPROG-} +doit_exec=${doit:-exec} + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +is_target_a_directory=possibly + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) is_target_a_directory=never;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename. + if test -d "$dst"; then + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dstbase=`basename "$src"` + case $dst in + */) dst=$dst$dstbase;; + *) dst=$dst/$dstbase;; + esac + dstdir_status=0 + else + dstdir=`dirname "$dst"` + test -d "$dstdir" + dstdir_status=$? + fi + fi + + case $dstdir in + */) dstdirslash=$dstdir;; + *) dstdirslash=$dstdir/;; + esac + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + # Note that $RANDOM variable is not portable (e.g. dash); Use it + # here however when possible just to lower collision chance. + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + + # Because "mkdir -p" follows existing symlinks and we likely work + # directly in world-writeable /tmp, make sure that the '$tmpdir' + # directory is successfully created first before we actually test + # 'mkdir -p' feature. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + oIFS=$IFS + IFS=/ + set -f + set fnord $dstdir + shift + set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=${dstdirslash}_inst.$$_ + rmtmp=${dstdirslash}_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + set +f && + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff --git a/jpeg-9d/install.txt b/jpeg-9d/install.txt new file mode 100644 index 0000000..107f6c1 --- /dev/null +++ b/jpeg-9d/install.txt @@ -0,0 +1,1127 @@ +INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software + +Copyright (C) 1991-2019, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file explains how to configure and install the IJG software. We have +tried to make this software extremely portable and flexible, so that it can be +adapted to almost any environment. The downside of this decision is that the +installation process is complicated. We have provided shortcuts to simplify +the task on common systems. But in any case, you will need at least a little +familiarity with C programming and program build procedures for your system. + +If you are only using this software as part of a larger program, the larger +program's installation procedure may take care of configuring the IJG code. +For example, Ghostscript's installation script will configure the IJG code. +You don't need to read this file if you just want to compile Ghostscript. + +If you are on a Unix machine, you may not need to read this file at all. +Try doing + ./configure + make + make test +If that doesn't complain, do + make install +(better do "make -n install" first to see if the makefile will put the files +where you want them). Read further if you run into snags or want to customize +the code for your system. + + +TABLE OF CONTENTS +----------------- + +Before you start +Configuring the software: + using the automatic "configure" script + using one of the supplied jconfig and makefile files + by hand +Building the software +Testing the software +Installing the software +Optional stuff +Optimization +Hints for specific systems + + +BEFORE YOU START +================ + +Before installing the software you must unpack the distributed source code. +Since you are reading this file, you have probably already succeeded in this +task. However, there is a potential for error if you needed to convert the +files to the local standard text file format (for example, if you are on +MS-DOS you may have converted LF end-of-line to CR/LF). You must apply +such conversion to all the files EXCEPT those whose names begin with "test". +The test files contain binary data; if you change them in any way then the +self-test will give bad results. + +Please check the last section of this file to see if there are hints for the +specific machine or compiler you are using. + + +CONFIGURING THE SOFTWARE +======================== + +To configure the IJG code for your system, you need to create two files: + * jconfig.h: contains values for system-dependent #define symbols. + * Makefile: controls the compilation process. +(On a non-Unix machine, you may create "project files" or some other +substitute for a Makefile. jconfig.h is needed in any environment.) + +We provide three different ways to generate these files: + * On a Unix system, you can just run the "configure" script. + * We provide sample jconfig files and makefiles for popular machines; + if your machine matches one of the samples, just copy the right sample + files to jconfig.h and Makefile. + * If all else fails, read the instructions below and make your own files. + + +Configuring the software using the automatic "configure" script +--------------------------------------------------------------- + +If you are on a Unix machine, you can just type + ./configure +and let the configure script construct appropriate configuration files. +If you're using "csh" on an old version of System V, you might need to type + sh configure +instead to prevent csh from trying to execute configure itself. +Expect configure to run for a few minutes, particularly on slower machines; +it works by compiling a series of test programs. + +Configure was created with GNU Autoconf and it follows the usual conventions +for GNU configure scripts. It makes a few assumptions that you may want to +override. You can do this by providing optional switches to configure: + +* Configure will build both static and shared libraries, if possible. +If you want to build libjpeg only as a static library, say + ./configure --disable-shared +If you want to build libjpeg only as a shared library, say + ./configure --disable-static +Configure uses GNU libtool to take care of system-dependent shared library +building methods. + +* Configure will use gcc (GNU C compiler) if it's available, otherwise cc. +To force a particular compiler to be selected, use the CC option, for example + ./configure CC='cc' +The same method can be used to include any unusual compiler switches. +For example, on HP-UX you probably want to say + ./configure CC='cc -Aa' +to get HP's compiler to run in ANSI mode. + +* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc. +You can override this by saying, for example, + ./configure CFLAGS='-O2' +if you want to compile without debugging support. + +* Configure will set up the makefile so that "make install" will install files +into /usr/local/bin, /usr/local/man, etc. You can specify an installation +prefix other than "/usr/local" by giving configure the option "--prefix=PATH". + +* If you don't have a lot of swap space, you may need to enable the IJG +software's internal virtual memory mechanism. To do this, give the option +"--enable-maxmem=N" where N is the default maxmemory limit in megabytes. +This is discussed in more detail under "Selecting a memory manager", below. +You probably don't need to worry about this on reasonably-sized Unix machines, +unless you plan to process very large images. + +Configure has some other features that are useful if you are cross-compiling +or working in a network of multiple machine types; but if you need those +features, you probably already know how to use them. + + +Configuring the software using one of the supplied jconfig and makefile files +----------------------------------------------------------------------------- + +If you have one of these systems, you can just use the provided configuration +files: + +Makefile jconfig file System and/or compiler + +makefile.manx jconfig.manx Amiga, Manx Aztec C +makefile.sas jconfig.sas Amiga, SAS C +makeproj.mac jconfig.mac Apple Macintosh, Metrowerks CodeWarrior +mak*jpeg.st jconfig.st Atari ST/STE/TT, Pure C or Turbo C +makefile.bcc jconfig.bcc MS-DOS or OS/2, Borland C +makefile.dj jconfig.dj MS-DOS, DJGPP (Delorie's port of GNU C) +makefile.mc6 jconfig.mc6 MS-DOS, Microsoft C (16-bit only) +makefile.wat jconfig.wat MS-DOS, OS/2, or Windows NT, Watcom C +makefile.vc jconfig.vc Windows, MS Visual C++ +makefile.vs jconfig.vc Windows, MS Visual C++ 6 Developer Studio +make*.vc6 +makefile.vs jconfig.vc Windows, Visual Studio 2019 (v16) +make*.v16 +makefile.b32 jconfig.vc Windows, Borland C++ 32-bit (bcc32) +makefile.mms jconfig.vms Digital VMS, with MMS software +makefile.vms jconfig.vms Digital VMS, without MMS software + +Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or +whatever your system uses as the standard makefile name). For more info see +the appropriate system-specific hints section near the end of this file. + + +Configuring the software by hand +-------------------------------- + +First, generate a jconfig.h file. If you are moderately familiar with C, +the comments in jconfig.txt should be enough information to do this; just +copy jconfig.txt to jconfig.h and edit it appropriately. Otherwise, you may +prefer to use the ckconfig.c program. You will need to compile and execute +ckconfig.c by hand --- we hope you know at least enough to do that. +ckconfig.c may not compile the first try (in fact, the whole idea is for it +to fail if anything is going to). If you get compile errors, fix them by +editing ckconfig.c according to the directions given in ckconfig.c. Once +you get it to run, it will write a suitable jconfig.h file, and will also +print out some advice about which makefile to use. + +You may also want to look at the canned jconfig files, if there is one for a +system similar to yours. + +Second, select a makefile and copy it to Makefile (or whatever your system +uses as the standard makefile name). The most generic makefiles we provide +are + makefile.ansi: if your C compiler supports function prototypes + makefile.unix: if not. +(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES" +in jconfig.h.) You may want to start from one of the other makefiles if +there is one for a system similar to yours. + +Look over the selected Makefile and adjust options as needed. In particular +you may want to change the CC and CFLAGS definitions. For instance, if you +are using GCC, set CC=gcc. If you had to use any compiler switches to get +ckconfig.c to work, make sure the same switches are in CFLAGS. + +If you are on a system that doesn't use makefiles, you'll need to set up +project files (or whatever you do use) to compile all the source files and +link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom. +See the file lists in any of the makefiles to find out which files go into +each program. Note that the provided makefiles all make a "library" file +libjpeg first, but you don't have to do that if you don't want to; the file +lists identify which source files are actually needed for compression, +decompression, or both. As a last resort, you can make a batch script that +just compiles everything and links it all together; makefile.vms is an example +of this (it's for VMS systems that have no make-like utility). + +Here are comments about some specific configuration decisions you'll +need to make: + +Command line style +------------------ + +These programs can use a Unix-like command line style which supports +redirection and piping, like this: + cjpeg inputfile >outputfile + cjpeg outputfile + source program | cjpeg >outputfile +The simpler "two file" command line style is just + cjpeg inputfile outputfile +You may prefer the two-file style, particularly if you don't have pipes. + +You MUST use two-file style on any system that doesn't cope well with binary +data fed through stdin/stdout; this is true for some MS-DOS compilers, for +example. If you're not on a Unix system, it's safest to assume you need +two-file style. (But if your compiler provides either the Posix-standard +fdopen() library routine or a Microsoft-compatible setmode() routine, you +can safely use the Unix command line style, by defining USE_FDOPEN or +USE_SETMODE respectively.) + +To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE". + +Selecting a memory manager +-------------------------- + +The IJG code is capable of working on images that are too big to fit in main +memory; data is swapped out to temporary files as necessary. However, the +code to do this is rather system-dependent. We provide five different +memory managers: + +* jmemansi.c This version uses the ANSI-standard library routine tmpfile(), + which not all non-ANSI systems have. On some systems + tmpfile() may put the temporary file in a non-optimal + location; if you don't like what it does, use jmemname.c. + +* jmemname.c This version creates named temporary files. For anything + except a Unix machine, you'll need to configure the + select_file_name() routine appropriately; see the comments + near the head of jmemname.c. If you use this version, define + NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files + are removed if the program is aborted. + +* jmemnobs.c (That stands for No Backing Store :-).) This will compile on + almost any system, but it assumes you have enough main memory + or virtual memory to hold the biggest images you work with. + +* jmemdos.c This should be used with most 16-bit MS-DOS compilers. + See the system-specific notes about MS-DOS for more info. + IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in + jconfig.h, and include the assembly file jmemdosa.asm in the + programs. The supplied makefiles and jconfig files for + 16-bit MS-DOS compilers already do both. + +* jmemmac.c Custom version for Apple Macintosh; see the system-specific + notes for Macintosh for more info. + +To use a particular memory manager, change the SYSDEPMEM variable in your +makefile to equal the corresponding object file name (for example, jmemansi.o +or jmemansi.obj for jmemansi.c). + +If you have plenty of (real or virtual) main memory, just use jmemnobs.c. +"Plenty" means about ten bytes for every pixel in the largest images +you plan to process, so a lot of systems don't meet this criterion. +If yours doesn't, try jmemansi.c first. If that doesn't compile, you'll have +to use jmemname.c; be sure to adjust select_file_name() for local conditions. +You may also need to change unlink() to remove() in close_backing_store(). + +Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM +setting to a reasonable value for your system (either by adding a #define for +DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile). +This value limits the amount of data space the program will attempt to +allocate. Code and static data space isn't counted, so the actual memory +needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory +setting. Larger max-memory settings reduce the amount of I/O needed to +process a large image, but too large a value can result in "insufficient +memory" failures. On most Unix machines (and other systems with virtual +memory), just set DEFAULT_MAX_MEM to several million and forget it. At the +other end of the spectrum, for MS-DOS machines you probably can't go much +above 300K to 400K. (On MS-DOS the value refers to conventional memory only. +Extended/expanded memory is handled separately by jmemdos.c.) + + +BUILDING THE SOFTWARE +===================== + +Now you should be able to compile the software. Just say "make" (or +whatever's necessary to start the compilation). Have a cup of coffee. + +Here are some things that could go wrong: + +If your compiler complains about undefined structures, you should be able to +shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h. + +If you have trouble with missing system include files or inclusion of the +wrong ones, read jinclude.h. This shouldn't happen if you used configure +or ckconfig.c to set up jconfig.h. + +There are a fair number of routines that do not use all of their parameters; +some compilers will issue warnings about this, which you can ignore. There +are also a few configuration checks that may give "unreachable code" warnings. +Any other warning deserves investigation. + +If you don't have a getenv() library routine, define NO_GETENV. + +Also see the system-specific hints, below. + + +TESTING THE SOFTWARE +==================== + +As a quick test of functionality we've included a small sample image in +several forms: + testorig.jpg Starting point for the djpeg tests. + testimg.ppm The output of djpeg testorig.jpg + testimg.bmp The output of djpeg -bmp -colors 256 testorig.jpg + testimg.jpg The output of cjpeg testimg.ppm + testprog.jpg Progressive-mode equivalent of testorig.jpg. + testimgp.jpg The output of cjpeg -progressive -optimize testimg.ppm +(The first- and second-generation .jpg files aren't identical since the +default compression parameters are lossy.) If you can generate duplicates +of the testimg* files then you probably have working programs. + +With most of the makefiles, "make test" will perform the necessary +comparisons. + +If you're using a makefile that doesn't provide the test option, run djpeg +and cjpeg by hand and compare the output files to testimg* with whatever +binary file comparison tool you have. The files should be bit-for-bit +identical. + +If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you +need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t. +Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h. A less likely +configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE +as long should take care of that one. + +If the cjpeg test run fails with "Missing Huffman code table entry", it's a +good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED. Go back to the +configuration step and run ckconfig.c. (This is a good plan for any other +test failure, too.) + +If you are using Unix (one-file) command line style on a non-Unix system, +it's a good idea to check that binary I/O through stdin/stdout actually +works. You should get the same results from "djpeg out.ppm" +as from "djpeg -outfile out.ppm testorig.jpg". Note that the makefiles all +use the latter style and therefore do not exercise stdin/stdout! If this +check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined. +If it still doesn't work, better use two-file style. + +If you chose a memory manager other than jmemnobs.c, you should test that +temporary-file usage works. Try "djpeg -bmp -colors 256 -max 0 testorig.jpg" +and make sure its output matches testimg.bmp. If you have any really large +images handy, try compressing them with -optimize and/or decompressing with +-colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large. + +NOTE: this is far from an exhaustive test of the JPEG software; some modules, +such as 1-pass color quantization, are not exercised at all. It's just a +quick test to give you some confidence that you haven't missed something +major. + + +INSTALLING THE SOFTWARE +======================= + +Once you're done with the above steps, you can install the software by +copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom) +to wherever you normally install programs. On Unix systems, you'll also want +to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1) +in the man-page directory. The pre-fab makefiles don't support this step +since there's such a wide variety of installation procedures on different +systems. + +If you generated a Makefile with the "configure" script, you can just say + make install +to install the programs and their man pages into the standard places. +(You'll probably need to be root to do this.) We recommend first saying + make -n install +to see where configure thought the files should go. You may need to edit +the Makefile, particularly if your system's conventions for man page +filenames don't match what configure expects. + +If you want to install the IJG library itself, for use in compiling other +programs besides ours, then you need to put the four include files + jpeglib.h jerror.h jconfig.h jmorecfg.h +into your include-file directory, and put the library file libjpeg.a +(extension may vary depending on system) wherever library files go. +If you generated a Makefile with "configure", it will do what it thinks +is the right thing if you say + make install-lib + + +OPTIONAL STUFF +============== + +Progress monitor: + +If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display +of percent-done progress reports. The routine provided in cdjpeg.c merely +prints percentages to stderr, but you can customize it to do something +fancier. + +Utah RLE file format support: + +We distribute the software with support for RLE image files (Utah Raster +Toolkit format) disabled, because the RLE support won't compile without the +Utah library. If you have URT version 3.1 or later, you can enable RLE +support as follows: + 1. #define RLE_SUPPORTED in jconfig.h. + 2. Add a -I option to CFLAGS in the Makefile for the directory + containing the URT .h files (typically the "include" + subdirectory of the URT distribution). + 3. Add -L... -lrle to LDLIBS in the Makefile, where ... specifies + the directory containing the URT "librle.a" file (typically the + "lib" subdirectory of the URT distribution). + +Support for 9-bit to 12-bit deep pixel data: + +The IJG code currently allows 8, 9, 10, 11, or 12 bits sample data precision. +(For color, this means 8 to 12 bits per channel, of course.) If you need to +work with deeper than 8-bit data, you can compile the IJG code for 9-bit to +12-bit operation. +To do so: + 1. In jmorecfg.h, define BITS_IN_JSAMPLE as 9, 10, 11, or 12 rather than 8. + 2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED, + because the code for those formats doesn't handle deeper than 8-bit data + and won't even compile. (The PPM code does work, as explained below. + The GIF code works too; it scales 8-bit GIF data to and from 12-bit + depth automatically.) + 3. Compile. Don't expect "make test" to pass, since the supplied test + files are for 8-bit data. + +Currently, 9-bit to 12-bit support does not work on 16-bit-int machines. + +Run-time selection and conversion of data precision are currently not +supported and may be added later. +Exception: The transcoding part (jpegtran) supports all settings in a +single instance, since it operates on the level of DCT coefficients and +not sample values. + +The PPM reader (rdppm.c) can read deeper than 8-bit data from either +text-format or binary-format PPM and PGM files. Binary-format PPM/PGM files +which have a maxval greater than 255 are assumed to use 2 bytes per sample, +MSB first (big-endian order). As of early 1995, 2-byte binary format is not +officially supported by the PBMPLUS library, but it is expected that a +future release of PBMPLUS will support it. Note that the PPM reader will +read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming +data is automatically rescaled to maxval=MAXJSAMPLE as appropriate for the +cjpeg bit depth. + +The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM +format, maxval=MAXJSAMPLE, when compiled with BITS_IN_JSAMPLE>8. Since this +format is not yet widely supported, you can disable it by compiling wrppm.c +with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a +standard 1-byte/sample PPM or PGM file. (Yes, this means still another copy +of djpeg to keep around. But hopefully you won't need it for very long. +Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.) + +Of course, if you are working with 9-bit to 12-bit data, you probably have +it stored in some other, nonstandard format. In that case you'll probably +want to write your own I/O modules to read and write your format. + +Note: +The standard Huffman tables are only valid for 8-bit data precision. If +you selected more than 8-bit data precision, cjpeg uses arithmetic coding +by default. The Huffman encoder normally uses entropy optimization to +compute usable tables for higher precision. Otherwise, you'll have to +supply different default Huffman tables. + +Removing code: + +If you need to make a smaller version of the JPEG software, some optional +functions can be removed at compile time. See the xxx_SUPPORTED #defines in +jconfig.h and jmorecfg.h. If at all possible, we recommend that you leave in +decoder support for all valid JPEG files, to ensure that you can read anyone's +output. Taking out support for image file formats that you don't use is the +most painless way to make the programs smaller. Another possibility is to +remove some of the DCT methods: in particular, the "IFAST" method may not be +enough faster than the others to be worth keeping on your machine. (If you +do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST +to a supported method, by adding a #define in jconfig.h.) + + +OPTIMIZATION +============ + +Unless you own a Cray, you'll probably be interested in making the JPEG +software go as fast as possible. This section covers some machine-dependent +optimizations you may want to try. We suggest that before trying any of +this, you first get the basic installation to pass the self-test step. +Repeat the self-test after any optimization to make sure that you haven't +broken anything. + +The integer DCT routines perform a lot of multiplications. These +multiplications must yield 32-bit results, but none of their input values +are more than 16 bits wide. On many machines, notably the 680x0 and 80x86 +CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32 +bit multiply. Unfortunately there is no portable way to specify such a +multiplication in C, but some compilers can generate one when you use the +right combination of casts. See the MULTIPLYxxx macro definitions in +jdct.h. If your compiler makes "int" be 32 bits and "short" be 16 bits, +defining SHORTxSHORT_32 is fairly likely to work. When experimenting with +alternate definitions, be sure to test not only whether the code still works +(use the self-test), but also whether it is actually faster --- on some +compilers, alternate definitions may compute the right answer, yet be slower +than the default. Timing cjpeg on a large PGM (grayscale) input file is the +best way to check this, as the DCT will be the largest fraction of the runtime +in that mode. (Note: some of the distributed compiler-specific jconfig files +already contain #define switches to select appropriate MULTIPLYxxx +definitions.) + +If your machine has sufficiently fast floating point hardware, you may find +that the float DCT method is faster than the integer DCT methods, even +after tweaking the integer multiply macros. In that case you may want to +make the float DCT be the default method. (The only objection to this is +that float DCT results may vary slightly across machines.) To do that, add +"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h. Even if you don't change +the default, you should redefine JDCT_FASTEST, which is the method selected +by djpeg's -fast switch. Don't forget to update the documentation files +(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done. + +If access to "short" arrays is slow on your machine, it may be a win to +define type JCOEF as int rather than short. This will cost a good deal of +memory though, particularly in some multi-pass modes, so don't do it unless +you have memory to burn and short is REALLY slow. + +If your compiler can compile function calls in-line, make sure the INLINE +macro in jmorecfg.h is defined as the keyword that marks a function +inline-able. Some compilers have a switch that tells the compiler to inline +any function it thinks is profitable (e.g., -finline-functions for gcc). +Enabling such a switch is likely to make the compiled code bigger but faster. + +In general, it's worth trying the maximum optimization level of your compiler, +and experimenting with any optional optimizations such as loop unrolling. +(Unfortunately, far too many compilers have optimizer bugs ... be prepared to +back off if the code fails self-test.) If you do any experimentation along +these lines, please report the optimal settings to jpeg-info@jpegclub.org so +we can mention them in future releases. Be sure to specify your machine and +compiler version. + + +HINTS FOR SPECIFIC SYSTEMS +========================== + +We welcome reports on changes needed for systems not mentioned here. Submit +'em to jpeg-info@jpegclub.org. Also, if configure or ckconfig.c is wrong +about how to configure the JPEG software for your system, please let us know. + + +Acorn RISC OS: + +(Thanks to Simon Middleton for these hints on compiling with Desktop C.) +After renaming the files according to Acorn conventions, take a copy of +makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and +change these definitions as indicated: + +CFLAGS= -throwback -IC: -Wn +LDLIBS=C:o.Stubs +SYSDEPMEM=jmemansi.o +LN=Link +AR=LibFile -c -o + +Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'. Remove the +lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h' +dependency section. + +Copy jconfig.txt to jconfig.h. Edit jconfig.h to define TWO_FILE_COMMANDLINE +and CHAR_IS_UNSIGNED. + +Run the makefile using !AMU not !Make. If you want to use the 'clean' and +'test' makefile entries then you will have to fiddle with the syntax a bit +and rename the test files. + + +Amiga: + +SAS C 6.50 reportedly is too buggy to compile the IJG code properly. +A patch to update to 6.51 is available from SAS or AmiNet FTP sites. + +The supplied config files are set up to use jmemname.c as the memory +manager, with temporary files being created on the device named by +"JPEGTMP:". + + +Atari ST/STE/TT: + +Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st +to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively. The +project files should work as-is with Pure C. For Turbo C, change library +filenames "pc..." to "tc..." in each project file. Note that libjpeg.prj +selects jmemansi.c as the recommended memory manager. You'll probably want to +adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K +less than your normal free memory. Put "#define DEFAULT_MAX_MEM nnnn" into +jconfig.h to do this. + +To use the 68881/68882 coprocessor for the floating point DCT, add the +compiler option "-8" to the project files and replace pcfltlib.lib with +pc881lib.lib in cjpeg.prj and djpeg.prj. Or if you don't have a +coprocessor, you may prefer to remove the float DCT code by undefining +DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float +code will be too slow to be useful). In that case, you can delete +pcfltlib.lib from the project files. + +Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp, +or jpegtran.ttp. You'll have to perform the self-test by hand. + +We haven't bothered to include project files for rdjpgcom and wrjpgcom. +Those source files should just be compiled by themselves; they don't +depend on the JPEG library. You can use the default.prj project file +of the Pure C distribution to make the programs. + +There is a bug in some older versions of the Turbo C library which causes the +space used by temporary files created with "tmpfile()" not to be freed after +an abnormal program exit. If you check your disk afterwards, you will find +cluster chains that are allocated but not used by a file. This should not +happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly +close temp files before exiting. But if you use the JPEG library with your +own code, be sure to supply a signal catcher, or else use a different +system-dependent memory manager. + + +Cray: + +Should you be so fortunate as to be running JPEG on a Cray YMP, there is a +compiler bug in old versions of Cray's Standard C (prior to 3.1). If you +still have an old compiler, you'll need to insert a line reading +"#pragma novector" just before the loop + for (i = 1; i <= (int) htbl->bits[l]; i++) + huffsize[p++] = (char) l; +in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c). +[This bug may or may not still occur with the current IJG code, but it's +probably a dead issue anyway...] + + +HP-UX: + +If you have HP-UX 7.05 or later with the "software development" C compiler, +you should run the compiler in ANSI mode. If using the configure script, +say + ./configure CC='cc -Aa' +(or -Ae if you prefer). If configuring by hand, use makefile.ansi and add +"-Aa" to the CFLAGS line in the makefile. + +If you have a pre-7.05 system, or if you are using the non-ANSI C compiler +delivered with a minimum HP-UX system, then you must use makefile.unix +(and do NOT add -Aa); or just run configure without the CC option. + +On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior +to A.08.07. If you get complaints about "not a typedef name", you'll have to +use makefile.unix, or run configure without the CC option. + + +Macintosh, generic comments: + +The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to +provide a Unix-style command line interface. You can use this interface on +the Mac by means of the ccommand() library routine provided by Metrowerks +CodeWarrior or Think C. This is only appropriate for testing the library, +however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want +to develop a Mac-style user interface. There isn't a complete example +available at the moment, but there are some helpful starting points: +1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to +JPEG under System 7 and later. This only illustrates how to use the +compression half of the library, but it does a very nice job of that part. +The CodeWarrior source code is available from http://www.pobox.com/~jsam. +2. Jim Brunner prepared a Mac-style user interface for both compression and +decompression. Unfortunately, it hasn't been updated since IJG v4, and +the library's API has changed considerably since then. Still it may be of +some help, particularly as a guide to compiling the IJG code under Think C. +Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu +or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx. + +jmemmac.c is the recommended memory manager back end for Macintosh. It uses +NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific +implementation of jpeg_mem_available(). It also creates temporary files that +follow Mac conventions. (That part of the code relies on System-7-or-later OS +functions. See the comments in jmemmac.c if you need to run it on System 6.) +NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c. + +You can also use jmemnobs.c, if you don't care about handling images larger +than available memory. If you use any memory manager back end other than +jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and +"DisposePtr", because Mac C libraries often have peculiar implementations of +malloc/free. (For instance, free() may not return the freed space to the +Mac Memory Manager. This is undesirable for the IJG code because jmemmgr.c +already clumps space requests.) + + +Macintosh, Metrowerks CodeWarrior: + +The Unix-command-line-style interface can be used by defining USE_CCOMMAND. +You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout. +This means that when using the cjpeg/djpeg programs, you'll have to type the +input and output file names in the "Arguments" text-edit box, rather than +using the file radio buttons. (Perhaps USE_FDOPEN or USE_SETMODE would +eliminate the problem, but I haven't heard from anyone who's tried it.) + +On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended +float. jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power +of 2. Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. + +The supplied configuration file jconfig.mac can be used for your jconfig.h; +it includes all the recommended symbol definitions. If you have AppleScript +installed, you can run the supplied script makeproj.mac to create CodeWarrior +project files for the library and the testbed applications, then build the +library and applications. (Thanks to Dan Sears and Don Agro for this nifty +hack, which saves us from trying to maintain CodeWarrior project files as part +of the IJG distribution...) + + +Macintosh, Think C: + +The documentation in Jim Brunner's "JPEG Convert" source code (see above) +includes detailed build instructions for Think C; it's probably somewhat +out of date for the current release, but may be helpful. + +If you want to build the minimal command line version, proceed as follows. +You'll have to prepare project files for the programs; we don't include any +in the distribution since they are not text files. Use the file lists in +any of the supplied makefiles as a guide. Also add the ANSI and Unix C +libraries in a separate segment. You may need to divide the JPEG files into +more than one segment; we recommend dividing compression and decompression +modules. Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is +called. You must also define TWO_FILE_COMMANDLINE because stdin/stdout +don't handle binary data correctly. + +On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float. +jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2. +Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. + +jconfig.mac should work as a jconfig.h configuration file for Think C, +but the makeproj.mac AppleScript script is specific to CodeWarrior. Sorry. + + +MIPS R3000: + +MIPS's cc version 1.31 has a rather nasty optimization bug. Don't use -O +if you have that compiler version. (Use "cc -V" to check the version.) +Note that the R3000 chip is found in workstations from DEC and others. + + +MS-DOS, generic comments for 16-bit compilers: + +The IJG code is designed to work well in 80x86 "small" or "medium" memory +models (i.e., data pointers are 16 bits unless explicitly declared "far"; +code pointers can be either size). You may be able to use small model to +compile cjpeg or djpeg by itself, but you will probably have to use medium +model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model, and you should avoid "huge" model if at all +possible. Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use +a small-data memory model; be sure it is NOT defined if you use a large-data +model. (The supplied makefiles and jconfig files for Borland and Microsoft C +compile in medium model and define NEED_FAR_POINTERS.) + +The DOS-specific memory manager, jmemdos.c, should be used if possible. +It needs some assembly-code routines which are in jmemdosa.asm; make sure +your makefile assembles that file and includes it in the library. If you +don't have a suitable assembler, you can get pre-assembled object files for +jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip. (DOS-oriented +distributions of the IJG source code often include these object files.) + +When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set +MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value). If your +C library's far-heap malloc() can't allocate blocks that large, reduce +MAX_ALLOC_CHUNK to whatever it can handle. + +If you can't use jmemdos.c for some reason --- for example, because you +don't have an assembler to assemble jmemdosa.asm --- you'll have to fall +back to jmemansi.c or jmemname.c. You'll probably still need to set +MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc() +more than 64K at a time. IMPORTANT: if you use jmemansi.c or jmemname.c, +you will have to compile in a large-data memory model in order to get the +right stdio library. Too bad. + +wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB +work area to hold the comment text. If your C library's malloc can't +handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c. + +Most MS-DOS compilers treat stdin/stdout as text files, so you must use +two-file command line style. But if your compiler has either fdopen() or +setmode(), you can use one-file style if you like. To do this, define +USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode. +(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.) You +should test that I/O through stdin/stdout produces the same results as I/O +to explicitly named files... the "make test" procedures in the supplied +makefiles do NOT use stdin/stdout. + + +MS-DOS, generic comments for 32-bit compilers: + +None of the above comments about memory models apply if you are using a +32-bit flat-memory-space environment, such as DJGPP or Watcom C. (And you +should use one if you have it, as performance will be much better than +8086-compatible code!) For flat-memory-space compilers, do NOT define +NEED_FAR_POINTERS, and do NOT use jmemdos.c. Use jmemnobs.c if the +environment supplies adequate virtual memory, otherwise use jmemansi.c or +jmemname.c. + +You'll still need to be careful about binary I/O through stdin/stdout. +See the last paragraph of the previous section. + + +MS-DOS, Borland C: + +Be sure to convert all the source files to DOS text format (CR/LF newlines). +Although Borland C will often work OK with unmodified Unix (LF newlines) +source files, sometimes it will give bogus compile errors. +"Illegal character '#'" is the most common such error. (This is true with +Borland C 3.1, but perhaps is fixed in newer releases.) + +If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. +jconfig.bcc already includes #define USE_SETMODE to make this work. +(fdopen does not work correctly.) + + +MS-DOS, Microsoft C: + +makefile.mc6 works with Microsoft C, DOS Visual C++, etc. It should only +be used if you want to build a 16-bit (small or medium memory model) program. + +If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. +jconfig.mc6 already includes #define USE_SETMODE to make this work. +(fdopen does not work correctly.) + +Note that this makefile assumes that the working copy of itself is called +"makefile". If you want to call it something else, say "makefile.mak", +be sure to adjust the dependency line that reads "$(RFILE) : makefile". +Otherwise the make will fail because it doesn't know how to create "makefile". +Worse, some releases of Microsoft's make utilities give an incorrect error +message in this situation. + +Old versions of MS C fail with an "out of macro expansion space" error +because they can't cope with the macro TRACEMS8 (defined in jerror.h). +If this happens to you, the easiest solution is to change TRACEMS8 to +expand to nothing. You'll lose the ability to dump out JPEG coefficient +tables with djpeg -debug -debug, but at least you can compile. + +Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn +off optimization entirely (remove -O from CFLAGS). 6.00A is better, but it +still generates bad code if you enable loop optimizations (-Ol or -Ox). + +MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ... +which is on by default. To work around this bug, compile that one file +with /Oo-. + + +Microsoft Windows (all versions), generic comments: + +Some Windows system include files define typedef boolean as "unsigned char". +The IJG code also defines typedef boolean, but we make it an "enum" by default. +This doesn't affect the IJG programs because we don't import those Windows +include files. But if you use the JPEG library in your own program, and some +of your program's files import one definition of boolean while some import the +other, you can get all sorts of mysterious problems. A good preventive step +is to make the IJG library use "unsigned char" for boolean. To do that, +add something like this to your jconfig.h file: + /* Define "boolean" as unsigned char, not enum, per Windows custom */ + #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ + typedef unsigned char boolean; + #endif + #ifndef FALSE /* in case these macros already exist */ + #define FALSE 0 /* values of boolean */ + #endif + #ifndef TRUE + #define TRUE 1 + #endif + #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +(This is already in jconfig.vc, by the way.) + +windef.h contains the declarations + #define far + #define FAR far +Since jmorecfg.h tries to define FAR as empty, you may get a compiler +warning if you include both jpeglib.h and windef.h (which windows.h +includes). To suppress the warning, you can put "#ifndef FAR"/"#endif" +around the line "#define FAR" in jmorecfg.h. +(Something like this is already in jmorecfg.h, by the way.) + +When using the library in a Windows application, you will almost certainly +want to modify or replace the error handler module jerror.c, since our +default error handler does a couple of inappropriate things: + 1. it tries to write error and warning messages on stderr; + 2. in event of a fatal error, it exits by calling exit(). + +A simple stopgap solution for problem 1 is to replace the line + fprintf(stderr, "%s\n", buffer); +(in output_message in jerror.c) with + MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR); +It's highly recommended that you at least do that much, since otherwise +error messages will disappear into nowhere. (Beginning with IJG v6b, this +code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in +jconfig.h to enable it.) + +The proper solution for problem 2 is to return control to your calling +application after a library error. This can be done with the setjmp/longjmp +technique discussed in libjpeg.txt and illustrated in example.c. (NOTE: +some older Windows C compilers provide versions of setjmp/longjmp that +don't actually work under Windows. You may need to use the Windows system +functions Catch and Throw instead.) + +The recommended memory manager under Windows is jmemnobs.c; in other words, +let Windows do any virtual memory management needed. You should NOT use +jmemdos.c nor jmemdosa.asm under Windows. + +For Windows 3.1, we recommend compiling in medium or large memory model; +for newer Windows versions, use a 32-bit flat memory model. (See the MS-DOS +sections above for more info about memory models.) In the 16-bit memory +models only, you'll need to put + #define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +into jconfig.h to limit allocation chunks to 64Kb. (Without that, you'd +have to use huge memory model, which slows things down unnecessarily.) +jmemnobs.c works without modification in large or flat memory models, but to +use medium model, you need to modify its jpeg_get_large and jpeg_free_large +routines to allocate far memory. In any case, you might like to replace +its calls to malloc and free with direct calls on Windows memory allocation +functions. + +You may also want to modify jdatasrc.c and jdatadst.c to use Windows file +operations rather than fread/fwrite. This is only necessary if your C +compiler doesn't provide a competent implementation of C stdio functions. + +You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library +will accept or deliver color pixels in BGR sample order, not RGB; BGR order +is usually more convenient under Windows. Note that this change will break +the sample applications cjpeg/djpeg, but the library itself works fine. + + +Many people want to convert the IJG library into a DLL. This is reasonably +straightforward, but watch out for the following: + + 1. Don't try to compile as a DLL in small or medium memory model; use +large model, or even better, 32-bit flat model. Many places in the IJG code +assume the address of a local variable is an ordinary (not FAR) pointer; +that isn't true in a medium-model DLL. + + 2. Microsoft C cannot pass file pointers between applications and DLLs. +(See Microsoft Knowledge Base, PSS ID Number Q50336.) So jdatasrc.c and +jdatadst.c don't work if you open a file in your application and then pass +the pointer to the DLL. One workaround is to make jdatasrc.c/jdatadst.c +part of your main application rather than part of the DLL. + + 3. You'll probably need to modify the macros GLOBAL() and EXTERN() to +attach suitable linkage keywords to the exported routine names. Similarly, +you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers +are declared in a way that lets application routines be called back through +the function pointers. These macros are in jmorecfg.h. Typical definitions +for a 16-bit DLL are: + #define GLOBAL(type) type _far _pascal _loadds _export + #define EXTERN(type) extern type _far _pascal _loadds + #define METHODDEF(type) static type _far _pascal + #define JMETHOD(type,methodname,arglist) \ + type (_far _pascal *methodname) arglist +For a 32-bit DLL you may want something like + #define GLOBAL(type) __declspec(dllexport) type + #define EXTERN(type) extern __declspec(dllexport) type +Although not all the GLOBAL routines are actually intended to be called by +the application, the performance cost of making them all DLL entry points is +negligible. + +The unmodified IJG library presents a very C-specific application interface, +so the resulting DLL is only usable from C or C++ applications. There has +been some talk of writing wrapper code that would present a simpler interface +usable from other languages, such as Visual Basic. This is on our to-do list +but hasn't been very high priority --- any volunteers out there? + + +Microsoft Windows, Borland C: + +The provided jconfig.bcc should work OK in a 32-bit Windows environment, +but you'll need to tweak it in a 16-bit environment (you'd need to define +NEED_FAR_POINTERS and MAX_ALLOC_CHUNK). Beware that makefile.bcc will need +alteration if you want to use it for Windows --- in particular, you should +use jmemnobs.c not jmemdos.c under Windows. + +Borland C++ 4.5 fails with an internal compiler error when trying to compile +jdmerge.c in 32-bit mode. If enough people complain, perhaps Borland will fix +it. In the meantime, the simplest known workaround is to add a redundant +definition of the variable range_limit in h2v1_merged_upsample(), at the head +of the block that handles odd image width (about line 268 in v6 jdmerge.c): + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */ + cb = GETJSAMPLE(*inptr1); +Pretty bizarre, especially since the very similar routine h2v2_merged_upsample +doesn't trigger the bug. +Recent reports suggest that this bug does not occur with "bcc32a" (the +Pentium-optimized version of the compiler). + +Another report from a user of Borland C 4.5 was that incorrect code (leading +to a color shift in processed images) was produced if any of the following +optimization switch combinations were used: + -Ot -Og + -Ot -Op + -Ot -Om +So try backing off on optimization if you see such a problem. (Are there +several different releases all numbered "4.5"??) + + +Microsoft Windows, Microsoft Visual C++: + +jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory +model. makefile.vc is intended for command-line use. (If you are using +the Developer Studio environment, you may prefer the DevStudio project +files; see below.) + +IJG JPEG 7 adds extern "C" to jpeglib.h. This avoids the need to put +extern "C" { ... } around #include "jpeglib.h" in your C++ application. +You can also force VC++ to treat the library as C++ code by renaming +all the *.c files to *.cpp (and adjusting the makefile to match). +In this case you also need to define the symbol DONT_USE_EXTERN_C in +the configuration to prevent jpeglib.h from using extern "C". + + +Microsoft Windows, Microsoft Visual C++ 6 Developer Studio: + +We include makefiles that should work as project files in Developer Studio +6.0 or later. There is a library makefile that builds the IJG library as +a static Win32 library, and application makefiles that build the sample +applications as Win32 console applications. (Even if you only want the +library, we recommend building the applications so that you can run the +self-test.) + +To use: +1. Open the command prompt, change to the source directory and execute + the command line + NMAKE /f makefile.vs setup-vc6 + If you get an error message saying that the "NMAKE" command could + not be found, execute the command + "%ProgramFiles%\Microsoft Visual Studio\VC98\Bin\VCVARS32" + to set the environment for using Microsoft Visual C++ tools, + and repeat the NMAKE call. + This will move jconfig.vc to jconfig.h and makefiles to project files. + (Note that the renaming is critical!) + Alternatively you can use + NMAKE /f makefile.vs setupcopy-vc6 + This will create renamed copies of the files, which allows to repeat + the setup later. +2. Open the workspace file jpeg.dsw, build the library project. + (If you are using Developer Studio more recent than 6.0, you'll + probably get a message saying that the project files are being updated.) +3. Open the workspace file apps.dsw, build the application projects. +4. To perform the self-test, execute the command line + NMAKE /f makefile.vs test-build +5. Move the application .exe files from the Release folder to an + appropriate location on your path. + + +Microsoft Windows, Visual Studio 2019 (v16): + +We include makefiles that should work as project files in Visual Studio +2019 (v16) or later. There is a library makefile that builds the IJG +library as a static Win32/x64 library, and application makefiles that +build the sample applications as Win32/x64 console applications. (Even +if you only want the library, we recommend building the applications so +that you can run the self-test.) + +To use: +1. Open the Developer Command Prompt for VS 2019, change to the source + directory and execute the command line + NMAKE /f makefile.vs setup-v16 + This will move jconfig.vc to jconfig.h and makefiles to project files. + (Note that the renaming is critical!) + Alternatively you can use + NMAKE /f makefile.vs setupcopy-v16 + This will create renamed copies of the files, which allows to repeat + the setup later. +2. Open the solution file jpeg.sln, build the library project. + a) If you are using Visual Studio more recent than + 2019 (v16), you'll probably get a message saying + that the project files are being updated. + b) If necessary, open the project properties and + adapt the Windows Target Platform Version in + the Configuration Properties, General section; + we support the latest version at the time of release. + c) If you want to build x64 code, change the platform setting from + Win32 to x64. You can build Win32 and x64 versions side by side. +3. Open the solution file apps.sln, build the application projects. +4. To perform the self-test, execute the command line + NMAKE /f makefile.vs test-32 + for the Win32 build, or on a 64-bit system + NMAKE /f makefile.vs test-64 + for the x64 build. +5. Move the application .exe files from the Release folder to an + appropriate location on your path. + + +OS/2, Borland C++: + +Watch out for optimization bugs in older Borland compilers; you may need +to back off the optimization switch settings. See the comments in +makefile.bcc. + + +SGI: + +On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile. +If you are using configure, you can do this by saying + ./configure RANLIB='ar -ts' +This change is not needed on all SGIs. Use it only if the make fails at the +stage of linking the completed programs. + +On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2" +reportedly speeds up the float DCT method substantially, enough to make it +faster than the default int method (but still slower than the fast int +method). If you use -mips2, you may want to alter the default DCT method to +be float. To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h. + + +VMS: + +On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1" +qualifier with MMS when building the JPEG package. + +VAX/VMS v5.5-1 may have problems with the test step of the build procedure +reporting differences when it compares the original and test images. If the +error points to the last block of the files, it is most likely bogus and may +be safely ignored. It seems to be because the files are Stream_LF and +Backup/Compare has difficulty with the (presumably) null padded files. +This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1. diff --git a/jpeg-9d/jaricom.c b/jpeg-9d/jaricom.c new file mode 100644 index 0000000..6900688 --- /dev/null +++ b/jpeg-9d/jaricom.c @@ -0,0 +1,153 @@ +/* + * jaricom.c + * + * Developed 1997-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains probability estimation tables for common use in + * arithmetic entropy encoding and decoding routines. + * + * This data represents Table D.3 in the JPEG spec (D.2 in the draft), + * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24 + * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* The following #define specifies the packing of the four components + * into the compact INT32 representation. + * Note that this formula must match the actual arithmetic encoder + * and decoder implementation. The implementation has to be changed + * if this formula is changed. + * The current organization is leaned on Markus Kuhn's JBIG + * implementation (jbig_tab.c). + */ + +#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b) + +const INT32 jpeg_aritab[113+1] = { +/* + * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS + */ + V( 0, 0x5a1d, 1, 1, 1 ), + V( 1, 0x2586, 14, 2, 0 ), + V( 2, 0x1114, 16, 3, 0 ), + V( 3, 0x080b, 18, 4, 0 ), + V( 4, 0x03d8, 20, 5, 0 ), + V( 5, 0x01da, 23, 6, 0 ), + V( 6, 0x00e5, 25, 7, 0 ), + V( 7, 0x006f, 28, 8, 0 ), + V( 8, 0x0036, 30, 9, 0 ), + V( 9, 0x001a, 33, 10, 0 ), + V( 10, 0x000d, 35, 11, 0 ), + V( 11, 0x0006, 9, 12, 0 ), + V( 12, 0x0003, 10, 13, 0 ), + V( 13, 0x0001, 12, 13, 0 ), + V( 14, 0x5a7f, 15, 15, 1 ), + V( 15, 0x3f25, 36, 16, 0 ), + V( 16, 0x2cf2, 38, 17, 0 ), + V( 17, 0x207c, 39, 18, 0 ), + V( 18, 0x17b9, 40, 19, 0 ), + V( 19, 0x1182, 42, 20, 0 ), + V( 20, 0x0cef, 43, 21, 0 ), + V( 21, 0x09a1, 45, 22, 0 ), + V( 22, 0x072f, 46, 23, 0 ), + V( 23, 0x055c, 48, 24, 0 ), + V( 24, 0x0406, 49, 25, 0 ), + V( 25, 0x0303, 51, 26, 0 ), + V( 26, 0x0240, 52, 27, 0 ), + V( 27, 0x01b1, 54, 28, 0 ), + V( 28, 0x0144, 56, 29, 0 ), + V( 29, 0x00f5, 57, 30, 0 ), + V( 30, 0x00b7, 59, 31, 0 ), + V( 31, 0x008a, 60, 32, 0 ), + V( 32, 0x0068, 62, 33, 0 ), + V( 33, 0x004e, 63, 34, 0 ), + V( 34, 0x003b, 32, 35, 0 ), + V( 35, 0x002c, 33, 9, 0 ), + V( 36, 0x5ae1, 37, 37, 1 ), + V( 37, 0x484c, 64, 38, 0 ), + V( 38, 0x3a0d, 65, 39, 0 ), + V( 39, 0x2ef1, 67, 40, 0 ), + V( 40, 0x261f, 68, 41, 0 ), + V( 41, 0x1f33, 69, 42, 0 ), + V( 42, 0x19a8, 70, 43, 0 ), + V( 43, 0x1518, 72, 44, 0 ), + V( 44, 0x1177, 73, 45, 0 ), + V( 45, 0x0e74, 74, 46, 0 ), + V( 46, 0x0bfb, 75, 47, 0 ), + V( 47, 0x09f8, 77, 48, 0 ), + V( 48, 0x0861, 78, 49, 0 ), + V( 49, 0x0706, 79, 50, 0 ), + V( 50, 0x05cd, 48, 51, 0 ), + V( 51, 0x04de, 50, 52, 0 ), + V( 52, 0x040f, 50, 53, 0 ), + V( 53, 0x0363, 51, 54, 0 ), + V( 54, 0x02d4, 52, 55, 0 ), + V( 55, 0x025c, 53, 56, 0 ), + V( 56, 0x01f8, 54, 57, 0 ), + V( 57, 0x01a4, 55, 58, 0 ), + V( 58, 0x0160, 56, 59, 0 ), + V( 59, 0x0125, 57, 60, 0 ), + V( 60, 0x00f6, 58, 61, 0 ), + V( 61, 0x00cb, 59, 62, 0 ), + V( 62, 0x00ab, 61, 63, 0 ), + V( 63, 0x008f, 61, 32, 0 ), + V( 64, 0x5b12, 65, 65, 1 ), + V( 65, 0x4d04, 80, 66, 0 ), + V( 66, 0x412c, 81, 67, 0 ), + V( 67, 0x37d8, 82, 68, 0 ), + V( 68, 0x2fe8, 83, 69, 0 ), + V( 69, 0x293c, 84, 70, 0 ), + V( 70, 0x2379, 86, 71, 0 ), + V( 71, 0x1edf, 87, 72, 0 ), + V( 72, 0x1aa9, 87, 73, 0 ), + V( 73, 0x174e, 72, 74, 0 ), + V( 74, 0x1424, 72, 75, 0 ), + V( 75, 0x119c, 74, 76, 0 ), + V( 76, 0x0f6b, 74, 77, 0 ), + V( 77, 0x0d51, 75, 78, 0 ), + V( 78, 0x0bb6, 77, 79, 0 ), + V( 79, 0x0a40, 77, 48, 0 ), + V( 80, 0x5832, 80, 81, 1 ), + V( 81, 0x4d1c, 88, 82, 0 ), + V( 82, 0x438e, 89, 83, 0 ), + V( 83, 0x3bdd, 90, 84, 0 ), + V( 84, 0x34ee, 91, 85, 0 ), + V( 85, 0x2eae, 92, 86, 0 ), + V( 86, 0x299a, 93, 87, 0 ), + V( 87, 0x2516, 86, 71, 0 ), + V( 88, 0x5570, 88, 89, 1 ), + V( 89, 0x4ca9, 95, 90, 0 ), + V( 90, 0x44d9, 96, 91, 0 ), + V( 91, 0x3e22, 97, 92, 0 ), + V( 92, 0x3824, 99, 93, 0 ), + V( 93, 0x32b4, 99, 94, 0 ), + V( 94, 0x2e17, 93, 86, 0 ), + V( 95, 0x56a8, 95, 96, 1 ), + V( 96, 0x4f46, 101, 97, 0 ), + V( 97, 0x47e5, 102, 98, 0 ), + V( 98, 0x41cf, 103, 99, 0 ), + V( 99, 0x3c3d, 104, 100, 0 ), + V( 100, 0x375e, 99, 93, 0 ), + V( 101, 0x5231, 105, 102, 0 ), + V( 102, 0x4c0f, 106, 103, 0 ), + V( 103, 0x4639, 107, 104, 0 ), + V( 104, 0x415e, 103, 99, 0 ), + V( 105, 0x5627, 105, 106, 1 ), + V( 106, 0x50e7, 108, 107, 0 ), + V( 107, 0x4b85, 109, 103, 0 ), + V( 108, 0x5597, 110, 109, 0 ), + V( 109, 0x504f, 111, 107, 0 ), + V( 110, 0x5a10, 110, 111, 1 ), + V( 111, 0x5522, 112, 109, 0 ), + V( 112, 0x59eb, 112, 111, 1 ), +/* + * This last entry is used for fixed probability estimate of 0.5 + * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851. + */ + V( 113, 0x5a1d, 113, 113, 0 ) +}; diff --git a/Jpeg/jcapimin.c b/jpeg-9d/jcapimin.c similarity index 96% rename from Jpeg/jcapimin.c rename to jpeg-9d/jcapimin.c index 270a353..639ce86 100644 --- a/Jpeg/jcapimin.c +++ b/jpeg-9d/jcapimin.c @@ -2,6 +2,7 @@ * jcapimin.c * * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2003-2010 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -63,14 +64,21 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) cinfo->comp_info = NULL; - for (i = 0; i < NUM_QUANT_TBLS; i++) + for (i = 0; i < NUM_QUANT_TBLS; i++) { cinfo->quant_tbl_ptrs[i] = NULL; + cinfo->q_scale_factor[i] = 100; + } for (i = 0; i < NUM_HUFF_TBLS; i++) { cinfo->dc_huff_tbl_ptrs[i] = NULL; cinfo->ac_huff_tbl_ptrs[i] = NULL; } + /* Must do it here for emit_dqt in case jpeg_write_tables is used */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + cinfo->script_space = NULL; cinfo->input_gamma = 1.0; /* in case application forgets */ @@ -116,7 +124,7 @@ jpeg_abort_compress (j_compress_ptr cinfo) */ GLOBAL(void) -jpeg_suppress_tables (j_compress_ptr cinfo, wxjpeg_boolean suppress) +jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) { int i; JQUANT_TBL * qtbl; diff --git a/Jpeg/jcapistd.c b/jpeg-9d/jcapistd.c similarity index 96% rename from Jpeg/jcapistd.c rename to jpeg-9d/jcapistd.c index c138b7c..0917afa 100644 --- a/Jpeg/jcapistd.c +++ b/jpeg-9d/jcapistd.c @@ -2,6 +2,7 @@ * jcapistd.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2013 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -35,7 +36,7 @@ */ GLOBAL(void) -jpeg_start_compress (j_compress_ptr cinfo, wxjpeg_boolean write_all_tables) +jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) { if (cinfo->global_state != CSTATE_START) ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); @@ -145,7 +146,7 @@ jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, (*cinfo->master->pass_startup) (cinfo); /* Verify that at least one iMCU row has been passed. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; if (num_lines < lines_per_iMCU_row) ERREXIT(cinfo, JERR_BUFFER_SIZE); diff --git a/jpeg-9d/jcarith.c b/jpeg-9d/jcarith.c new file mode 100644 index 0000000..46ce6c6 --- /dev/null +++ b/jpeg-9d/jcarith.c @@ -0,0 +1,945 @@ +/* + * jcarith.c + * + * Developed 1997-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy encoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy encoder object for arithmetic encoding. */ + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */ + INT32 a; /* A register, normalized size of coding interval */ + INT32 sc; /* counter for stacked 0xFF values which might overflow */ + INT32 zc; /* counter for pending 0x00 output values which might * + * be discarded at the end ("Pacman" termination) */ + int ct; /* bit shift counter, determines when next byte will be written */ + int buffer; /* buffer for most recent output byte != 0xFF */ + + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_encoder; + +typedef arith_entropy_encoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + +/* NOTE: Uncomment the following #define if you want to use the + * given formula for calculating the AC conditioning parameter Kx + * for spectral selection progressive coding in section G.1.3.2 + * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4). + * Although the spec and P&M authors claim that this "has proven + * to give good results for 8 bit precision samples", I'm not + * convinced yet that this is really beneficial. + * Early tests gave only very marginal compression enhancements + * (a few - around 5 or so - bytes even for very large files), + * which would turn out rather negative if we'd suppress the + * DAC (Define Arithmetic Conditioning) marker segments for + * the default parameters in the future. + * Note that currently the marker writing module emits 12-byte + * DAC segments for a full-component scan in a color image. + * This is not worth worrying about IMHO. However, since the + * spec defines the default values to be used if the tables + * are omitted (unlike Huffman tables, which are required + * anyway), one might optimize this behaviour in the future, + * and then it would be disadvantageous to use custom tables if + * they don't provide sufficient gain to exceed the DAC size. + * + * On the other hand, I'd consider it as a reasonable result + * that the conditioning has no significant influence on the + * compression performance. This means that the basic + * statistical model is already rather stable. + * + * Thus, at the moment, we use the default conditioning values + * anyway, and do not use the custom formula. + * +#define CALCULATE_SPECTRAL_CONDITIONING + */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +LOCAL(void) +emit_byte (int val, j_compress_ptr cinfo) +/* Write next output byte; we do not support suspension in this module. */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *dest->next_output_byte++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); +} + + +/* + * Finish up at the end of an arithmetic-compressed scan. + */ + +METHODDEF(void) +finish_pass (j_compress_ptr cinfo) +{ + arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + INT32 temp; + + /* Section D.1.8: Termination of encoding */ + + /* Find the e->c in the coding interval with the largest + * number of trailing zero bits */ + if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c) + e->c = temp + 0x8000L; + else + e->c = temp; + /* Send remaining bytes to output */ + e->c <<= e->ct; + if (e->c & 0xF8000000L) { + /* One final overflow has to be handled */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + } else { + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + } + /* Output final bytes only if they are not 0x00 */ + if (e->c & 0x7FFF800L) { + if (e->zc) /* output final pending zero bytes */ + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte((int) ((e->c >> 19) & 0xFF), cinfo); + if (((e->c >> 19) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + if (e->c & 0x7F800L) { + emit_byte((int) ((e->c >> 11) & 0xFF), cinfo); + if (((e->c >> 11) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + } + } +} + + +/* + * The core arithmetic encoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Parameter 'val' to be encoded may be 0 or 1 (binary decision). + * + * Note: I've added full "Pacman" termination support to the + * byte output routines, which is equivalent to the optional + * Discard_final_zeros procedure (Figure D.15) in the spec. + * Thus, we always produce the shortest possible output + * stream compliant to the spec (no trailing zero bytes, + * except for FF stuffing). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(void) +arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv; + + /* Fetch values from our compact representation of Table D.3(D.2): + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Encode & estimation procedures per sections D.1.4 & D.1.5 */ + e->a -= qe; + if (val != (sv >> 7)) { + /* Encode the less probable symbol */ + if (e->a >= qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency, otherwise code the LPS + * as usual: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + } else { + /* Encode the more probable symbol */ + if (e->a >= 0x8000L) + return; /* A >= 0x8000 -> ready, no renormalization required */ + if (e->a < qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + + /* Renormalization & data output per section D.1.6 */ + do { + e->a <<= 1; + e->c <<= 1; + if (--e->ct == 0) { + /* Another byte is ready for output */ + temp = e->c >> 19; + if (temp > 0xFF) { + /* Handle overflow over all stacked 0xFF bytes */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + /* Note: The 3 spacer bits in the C register guarantee + * that the new buffer byte can't be 0xFF here + * (see page 160 in the P&M JPEG book). */ + /* New output byte, might overflow later */ + e->buffer = (int) (temp & 0xFF); + } else if (temp == 0xFF) { + ++e->sc; /* stack 0xFF byte (which might overflow later) */ + } else { + /* Output all stacked 0xFF bytes, they will not overflow any more */ + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + /* New output byte (can still overflow) */ + e->buffer = (int) (temp & 0xFF); + } + e->c &= 0x7FFFFL; + e->ct += 8; + } + } while (e->a < 0x8000L); +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(void) +emit_restart (j_compress_ptr cinfo, int restart_num) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + finish_pass(cinfo); + + emit_byte(0xFF, cinfo); + emit_byte(JPEG_RST0 + restart_num, cinfo); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int blkn, ci, tbl; + int v, v2, m; + ISHIFT_TEMPS + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + m = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al); + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = m - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = m; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke; + int v, v2, m; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + ke = cinfo->Se; + do { + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + } while (--ke); + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = cinfo->Ss - 1; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[++k]]) >= 0) { + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + break; + } + } + arith_encode(cinfo, st + 1, 0); + st += 3; + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k < cinfo->Se */ + if (k < cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int Al, blkn; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + Al = cinfo->Al; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* We simply emit the Al'th bit of the DC coefficient value. */ + arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1); + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke, kex; + int v; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Section G.1.3.3: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + ke = cinfo->Se; + do { + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + } while (--ke); + + /* Establish EOBx (previous stage end-of-block) index */ + for (kex = ke; kex > 0; kex--) + if ((v = (*block)[natural_order[kex]]) >= 0) { + if (v >>= cinfo->Ah) break; + } else { + v = -v; + if (v >>= cinfo->Ah) break; + } + + /* Figure G.10: Encode_AC_Coefficients_SA */ + for (k = cinfo->Ss - 1; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + if (k >= kex) + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[++k]]) >= 0) { + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + } + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + } + break; + } + } + arith_encode(cinfo, st + 1, 0); + st += 3; + } + } + /* Encode EOB decision only if k < cinfo->Se */ + if (k < cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke; + int v, v2, m; + int blkn, ci; + jpeg_component_info * compptr; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = (*block)[0]; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + if ((ke = cinfo->lim_Se) == 0) continue; + tbl = compptr->ac_tbl_no; + + /* Establish EOB (end-of-block) index */ + do { + if ((*block)[natural_order[ke]]) break; + } while (--ke); + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = 0; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 0); /* EOB decision */ + while ((v = (*block)[natural_order[++k]]) == 0) { + arith_encode(cinfo, st + 1, 0); + st += 3; + } + arith_encode(cinfo, st + 1, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, entropy->fixed_bin, 0); + } else { + v = -v; + arith_encode(cinfo, entropy->fixed_bin, 1); + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k < cinfo->lim_Se */ + if (k < cinfo->lim_Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_compress_ptr cinfo, boolean gather_statistics) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + /* Make sure to avoid that in the master control logic! + * We are fully adaptive here and need no extra + * statistics gathering pass! + */ + ERREXIT(cinfo, JERR_NOT_COMPILED); + + /* We assume jcmaster.c already validated the progressive scan parameters. */ + + /* Select execution routines */ + if (cinfo->progressive_mode) { + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else + entropy->pub.encode_mcu = encode_mcu_AC_refine; + } + } else + entropy->pub.encode_mcu = encode_mcu; + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); +#ifdef CALCULATE_SPECTRAL_CONDITIONING + if (cinfo->progressive_mode) + /* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */ + cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4); +#endif + } + } + + /* Initialize arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for arithmetic entropy encoding. + */ + +GLOBAL(void) +jinit_arith_encoder (j_compress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(arith_entropy_encoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass; + entropy->pub.finish_pass = finish_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; +} diff --git a/Jpeg/jccoefct.c b/jpeg-9d/jccoefct.c similarity index 92% rename from Jpeg/jccoefct.c rename to jpeg-9d/jccoefct.c index 3315f21..924a703 100644 --- a/Jpeg/jccoefct.c +++ b/jpeg-9d/jccoefct.c @@ -2,6 +2,7 @@ * jccoefct.c * * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2003-2011 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -58,12 +59,12 @@ typedef my_coef_controller * my_coef_ptr; /* Forward declarations */ -METHODDEF(wxjpeg_boolean) compress_data +METHODDEF(boolean) compress_data JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); #ifdef FULL_COEF_BUFFER_SUPPORTED -METHODDEF(wxjpeg_boolean) compress_first_pass +METHODDEF(boolean) compress_first_pass JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -METHODDEF(wxjpeg_boolean) compress_output +METHODDEF(boolean) compress_output JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); #endif @@ -139,7 +140,7 @@ start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) * which we index according to the component's SOF position. */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) { my_coef_ptr coef = (my_coef_ptr) cinfo->coef; @@ -149,6 +150,7 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) int blkn, bi, ci, yindex, yoffset, blockcnt; JDIMENSION ypos, xpos; jpeg_component_info *compptr; + forward_DCT_ptr forward_DCT; /* Loop to write as much as one whole iMCU row */ for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; @@ -167,35 +169,37 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) blkn = 0; for (ci = 0; ci < cinfo->comps_in_scan; ci++) { compptr = cinfo->cur_comp_info[ci]; + forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index]; blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width : compptr->last_col_width; xpos = MCU_col_num * compptr->MCU_sample_width; - ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */ + ypos = yoffset * compptr->DCT_v_scaled_size; + /* ypos == (yoffset+yindex) * DCTSIZE */ for (yindex = 0; yindex < compptr->MCU_height; yindex++) { if (coef->iMCU_row_num < last_iMCU_row || yoffset+yindex < compptr->last_row_height) { - (*cinfo->fdct->forward_DCT) (cinfo, compptr, - input_buf[compptr->component_index], - coef->MCU_buffer[blkn], - ypos, xpos, (JDIMENSION) blockcnt); + (*forward_DCT) (cinfo, compptr, + input_buf[compptr->component_index], + coef->MCU_buffer[blkn], + ypos, xpos, (JDIMENSION) blockcnt); if (blockcnt < compptr->MCU_width) { /* Create some dummy blocks at the right edge of the image. */ - jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], - (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); + FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt], + (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); for (bi = blockcnt; bi < compptr->MCU_width; bi++) { coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; } } } else { /* Create a row of dummy blocks at the bottom of the image. */ - jzero_far((void FAR *) coef->MCU_buffer[blkn], - compptr->MCU_width * SIZEOF(JBLOCK)); + FMEMZERO((void FAR *) coef->MCU_buffer[blkn], + compptr->MCU_width * SIZEOF(JBLOCK)); for (bi = 0; bi < compptr->MCU_width; bi++) { coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; } } blkn += compptr->MCU_width; - ypos += DCTSIZE; + ypos += compptr->DCT_v_scaled_size; } } /* Try to write the MCU. In event of a suspension failure, we will @@ -241,7 +245,7 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) * at the scan-dependent variables (MCU dimensions, etc). */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) { my_coef_ptr coef = (my_coef_ptr) cinfo->coef; @@ -252,6 +256,7 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) jpeg_component_info *compptr; JBLOCKARRAY buffer; JBLOCKROW thisblockrow, lastblockrow; + forward_DCT_ptr forward_DCT; for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { @@ -274,19 +279,19 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) ndummy = (int) (blocks_across % h_samp_factor); if (ndummy > 0) ndummy = h_samp_factor - ndummy; + forward_DCT = cinfo->fdct->forward_DCT[ci]; /* Perform DCT for all non-dummy blocks in this iMCU row. Each call * on forward_DCT processes a complete horizontal row of DCT blocks. */ for (block_row = 0; block_row < block_rows; block_row++) { thisblockrow = buffer[block_row]; - (*cinfo->fdct->forward_DCT) (cinfo, compptr, - input_buf[ci], thisblockrow, - (JDIMENSION) (block_row * DCTSIZE), - (JDIMENSION) 0, blocks_across); + (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow, + (JDIMENSION) (block_row * compptr->DCT_v_scaled_size), + (JDIMENSION) 0, blocks_across); if (ndummy > 0) { /* Create dummy blocks at the right edge of the image. */ thisblockrow += blocks_across; /* => first dummy block */ - jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); + FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); lastDC = thisblockrow[-1][0]; for (bi = 0; bi < ndummy; bi++) { thisblockrow[bi][0] = lastDC; @@ -305,8 +310,8 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) block_row++) { thisblockrow = buffer[block_row]; lastblockrow = buffer[block_row-1]; - jzero_far((void FAR *) thisblockrow, - (size_t) (blocks_across * SIZEOF(JBLOCK))); + FMEMZERO((void FAR *) thisblockrow, + (size_t) (blocks_across * SIZEOF(JBLOCK))); for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { lastDC = lastblockrow[h_samp_factor-1][0]; for (bi = 0; bi < h_samp_factor; bi++) { @@ -337,7 +342,7 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) * NB: input_buf is ignored; it is likely to be a NULL pointer. */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) { my_coef_ptr coef = (my_coef_ptr) cinfo->coef; @@ -402,7 +407,7 @@ compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) */ GLOBAL(void) -jinit_c_coef_controller (j_compress_ptr cinfo, wxjpeg_boolean need_full_buffer) +jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) { my_coef_ptr coef; diff --git a/Jpeg/jccolor.c b/jpeg-9d/jccolor.c similarity index 59% rename from Jpeg/jccolor.c rename to jpeg-9d/jccolor.c index 2f74cc2..db2ca42 100644 --- a/Jpeg/jccolor.c +++ b/jpeg-9d/jccolor.c @@ -2,6 +2,7 @@ * jccolor.c * * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -19,7 +20,7 @@ typedef struct { struct jpeg_color_converter pub; /* public fields */ /* Private state for RGB->YCC conversion */ - JPEG_INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ + INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ } my_color_converter; typedef my_color_converter * my_cconvert_ptr; @@ -28,13 +29,25 @@ typedef my_color_converter * my_cconvert_ptr; /**************** RGB -> YCbCr conversion: most common case **************/ /* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B - * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE - * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011), + * previously known as Recommendation CCIR 601-1, except that Cb and Cr + * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999. + * sYCC (standard luma-chroma-chroma color space with extended gamut) + * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F. + * bg-sRGB and bg-sYCC (big gamut standard color spaces) + * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G. + * Note that the derived conversion coefficients given in some of these + * documents are imprecise. The general conversion equations are + * Y = Kr * R + (1 - Kr - Kb) * G + Kb * B + * Cb = 0.5 * (B - Y) / (1 - Kb) + * Cr = 0.5 * (R - Y) / (1 - Kr) + * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993 + * from the 1953 FCC NTSC primaries and CIE Illuminant C), + * the conversion equations to be implemented are therefore + * Y = 0.299 * R + 0.587 * G + 0.114 * B + * Cb = -0.168735892 * R - 0.331264108 * G + 0.5 * B + CENTERJSAMPLE + * Cr = 0.5 * R - 0.418687589 * G - 0.081312411 * B + CENTERJSAMPLE * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) @@ -48,17 +61,17 @@ typedef my_color_converter * my_cconvert_ptr; * For even more speed, we avoid doing any multiplications in the inner loop * by precalculating the constants times R,G,B for all possible values. * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. + * for 9-bit to 12-bit samples it is still acceptable. It's not very + * reasonable for 16-bit samples, but if you want lossless storage you + * shouldn't be changing colorspace anyway. * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included * in the tables to save adding them separately in the inner loop. */ #define SCALEBITS 16 /* speediest right-shift on some machines */ -#define CBCR_OFFSET ((JPEG_INT32) CENTERJSAMPLE << SCALEBITS) -#define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((JPEG_INT32) ((x) * (1L<cconvert; - JPEG_INT32 * rgb_ycc_tab; - JPEG_INT32 i; + INT32 * rgb_ycc_tab; + INT32 i; /* Allocate and fill in the conversion tables. */ - cconvert->rgb_ycc_tab = rgb_ycc_tab = (JPEG_INT32 *) + cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (TABLE_SIZE * SIZEOF(JPEG_INT32))); + TABLE_SIZE * SIZEOF(INT32)); for (i = 0; i <= MAXJSAMPLE; i++) { - rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; - rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; - rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; - rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; - rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; + rgb_ycc_tab[i+R_Y_OFF] = FIX(0.299) * i; + rgb_ycc_tab[i+G_Y_OFF] = FIX(0.587) * i; + rgb_ycc_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF; + rgb_ycc_tab[i+R_CB_OFF] = (- FIX(0.168735892)) * i; + rgb_ycc_tab[i+G_CB_OFF] = (- FIX(0.331264108)) * i; /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. * This ensures that the maximum output will round to MAXJSAMPLE * not MAXJSAMPLE+1, and thus that we don't have to range-limit. */ - rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; + rgb_ycc_tab[i+B_CB_OFF] = FIX(0.5) * i + CBCR_OFFSET + ONE_HALF-1; /* B=>Cb and R=>Cr tables are the same - rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; + rgb_ycc_tab[i+R_CR_OFF] = FIX(0.5) * i + CBCR_OFFSET + ONE_HALF-1; */ - rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; - rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; + rgb_ycc_tab[i+G_CR_OFF] = (- FIX(0.418687589)) * i; + rgb_ycc_tab[i+B_CR_OFF] = (- FIX(0.081312411)) * i; } } @@ -118,12 +131,12 @@ rgb_ycc_start (j_compress_ptr cinfo) * Convert some rows of samples to the JPEG colorspace. * * Note that we change from the application's interleaved-pixel format - * to our internal noninterleaved, one-plane-per-component format. - * The input buffer is therefore three times as wide as the output buffer. + * to our internal noninterleaved, one-plane-per-component format. The + * input buffer is therefore three times as wide as the output buffer. * - * A starting row offset is provided only for the output buffer. The caller - * can easily adjust the passed input_buf value to accommodate any row - * offset required on that side. + * A starting row offset is provided only for the output buffer. The + * caller can easily adjust the passed input_buf value to accommodate + * any row offset required on that side. */ METHODDEF(void) @@ -133,7 +146,7 @@ rgb_ycc_convert (j_compress_ptr cinfo, { my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; register int r, g, b; - register JPEG_INT32 * ctab = cconvert->rgb_ycc_tab; + register INT32 * ctab = cconvert->rgb_ycc_tab; register JSAMPROW inptr; register JSAMPROW outptr0, outptr1, outptr2; register JDIMENSION col; @@ -189,7 +202,7 @@ rgb_gray_convert (j_compress_ptr cinfo, { my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; register int r, g, b; - register JPEG_INT32 * ctab = cconvert->rgb_ycc_tab; + register INT32 * ctab = cconvert->rgb_ycc_tab; register JSAMPROW inptr; register JSAMPROW outptr; register JDIMENSION col; @@ -197,8 +210,7 @@ rgb_gray_convert (j_compress_ptr cinfo, while (--num_rows >= 0) { inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; + outptr = output_buf[0][output_row++]; for (col = 0; col < num_cols; col++) { r = GETJSAMPLE(inptr[RGB_RED]); g = GETJSAMPLE(inptr[RGB_GREEN]); @@ -216,8 +228,8 @@ rgb_gray_convert (j_compress_ptr cinfo, /* * Convert some rows of samples to the JPEG colorspace. * This version handles Adobe-style CMYK->YCCK conversion, - * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same - * conversion as above, while passing K (black) unchanged. + * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the + * same conversion as above, while passing K (black) unchanged. * We assume rgb_ycc_start has been called. */ @@ -228,7 +240,7 @@ cmyk_ycck_convert (j_compress_ptr cinfo, { my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; register int r, g, b; - register JPEG_INT32 * ctab = cconvert->rgb_ycc_tab; + register INT32 * ctab = cconvert->rgb_ycc_tab; register JSAMPROW inptr; register JSAMPROW outptr0, outptr1, outptr2, outptr3; register JDIMENSION col; @@ -270,10 +282,52 @@ cmyk_ycck_convert (j_compress_ptr cinfo, } +/* + * Convert some rows of samples to the JPEG colorspace. + * [R,G,B] to [R-G,G,B-G] conversion with modulo calculation + * (forward reversible color transform). + * This can be seen as an adaption of the general RGB->YCbCr + * conversion equation with Kr = Kb = 0, while replacing the + * normalization by modulo calculation. + */ + +METHODDEF(void) +rgb_rgb1_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + inptr += RGB_PIXELSIZE; + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + outptr0[col] = (JSAMPLE) ((r - g + CENTERJSAMPLE) & MAXJSAMPLE); + outptr1[col] = (JSAMPLE) g; + outptr2[col] = (JSAMPLE) ((b - g + CENTERJSAMPLE) & MAXJSAMPLE); + } + } +} + + /* * Convert some rows of samples to the JPEG colorspace. * This version handles grayscale output with no conversion. - * The source can be either plain grayscale or YCbCr (since Y == gray). + * The source can be either plain grayscale or YCC (since Y == gray). */ METHODDEF(void) @@ -283,17 +337,49 @@ grayscale_convert (j_compress_ptr cinfo, { register JSAMPROW inptr; register JSAMPROW outptr; + register JDIMENSION count; + register int instride = cinfo->input_components; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row++]; + for (count = num_cols; count > 0; count--) { + *outptr++ = *inptr; /* don't need GETJSAMPLE() here */ + inptr += instride; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * No colorspace conversion, but change from interleaved + * to separate-planes representation. + */ + +METHODDEF(void) +rgb_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; register JDIMENSION col; JDIMENSION num_cols = cinfo->image_width; - int instride = cinfo->input_components; while (--num_rows >= 0) { inptr = *input_buf++; - outptr = output_buf[0][output_row]; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; output_row++; for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ - inptr += instride; + /* We can dispense with GETJSAMPLE() here */ + outptr0[col] = inptr[RGB_RED]; + outptr1[col] = inptr[RGB_GREEN]; + outptr2[col] = inptr[RGB_BLUE]; + inptr += RGB_PIXELSIZE; } } } @@ -312,19 +398,19 @@ null_convert (j_compress_ptr cinfo, { register JSAMPROW inptr; register JSAMPROW outptr; - register JDIMENSION col; - register int ci; - int nc = cinfo->num_components; + register JDIMENSION count; + register int num_comps = cinfo->num_components; JDIMENSION num_cols = cinfo->image_width; + int ci; while (--num_rows >= 0) { /* It seems fastest to make a separate pass for each component. */ - for (ci = 0; ci < nc; ci++) { - inptr = *input_buf; + for (ci = 0; ci < num_comps; ci++) { + inptr = input_buf[0] + ci; outptr = output_buf[ci][output_row]; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */ - inptr += nc; + for (count = num_cols; count > 0; count--) { + *outptr++ = *inptr; /* don't need GETJSAMPLE() here */ + inptr += num_comps; } } input_buf++; @@ -353,10 +439,9 @@ jinit_color_converter (j_compress_ptr cinfo) { my_cconvert_ptr cconvert; - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_converter)); - cinfo->cconvert = (struct jpeg_color_converter *) cconvert; + cconvert = (my_cconvert_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_color_converter)); + cinfo->cconvert = &cconvert->pub; /* set start_pass to null method until we find out differently */ cconvert->pub.start_pass = null_method; @@ -368,6 +453,7 @@ jinit_color_converter (j_compress_ptr cinfo) break; case JCS_RGB: + case JCS_BG_RGB: #if RGB_PIXELSIZE != 3 if (cinfo->input_components != RGB_PIXELSIZE) ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); @@ -375,6 +461,7 @@ jinit_color_converter (j_compress_ptr cinfo) #endif /* else share code with YCbCr */ case JCS_YCbCr: + case JCS_BG_YCC: if (cinfo->input_components != 3) ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); break; @@ -388,65 +475,121 @@ jinit_color_converter (j_compress_ptr cinfo) default: /* JCS_UNKNOWN can be anything */ if (cinfo->input_components < 1) ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; } + /* Support color transform only for RGB colorspaces */ + if (cinfo->color_transform && + cinfo->jpeg_color_space != JCS_RGB && + cinfo->jpeg_color_space != JCS_BG_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + /* Check num_components, set conversion method based on requested space */ switch (cinfo->jpeg_color_space) { case JCS_GRAYSCALE: if (cinfo->num_components != 1) ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_GRAYSCALE) + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + case JCS_YCbCr: + case JCS_BG_YCC: cconvert->pub.color_convert = grayscale_convert; - else if (cinfo->in_color_space == JCS_RGB) { + break; + case JCS_RGB: cconvert->pub.start_pass = rgb_ycc_start; cconvert->pub.color_convert = rgb_gray_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = grayscale_convert; - else + break; + default: ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } break; case JCS_RGB: + case JCS_BG_RGB: if (cinfo->num_components != 3) ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3) - cconvert->pub.color_convert = null_convert; - else + if (cinfo->in_color_space != cinfo->jpeg_color_space) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb_rgb1_convert; + break; + default: ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } break; case JCS_YCbCr: if (cinfo->num_components != 3) ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB) { + switch (cinfo->in_color_space) { + case JCS_RGB: cconvert->pub.start_pass = rgb_ycc_start; cconvert->pub.color_convert = rgb_ycc_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) + break; + case JCS_YCbCr: cconvert->pub.color_convert = null_convert; - else + break; + default: ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_BG_YCC: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + switch (cinfo->in_color_space) { + case JCS_RGB: + /* For conversion from normal RGB input to BG_YCC representation, + * the Cb/Cr values are first computed as usual, and then + * quantized further after DCT processing by a factor of + * 2 in reference to the nominal quantization factor. + */ + /* need quantization scale by factor of 2 after DCT */ + cinfo->comp_info[1].component_needed = TRUE; + cinfo->comp_info[2].component_needed = TRUE; + /* compute normal YCC first */ + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_ycc_convert; + break; + case JCS_YCbCr: + /* need quantization scale by factor of 2 after DCT */ + cinfo->comp_info[1].component_needed = TRUE; + cinfo->comp_info[2].component_needed = TRUE; + /*FALLTHROUGH*/ + case JCS_BG_YCC: + /* Pass through for BG_YCC input */ + cconvert->pub.color_convert = null_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } break; case JCS_CMYK: if (cinfo->num_components != 4) ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) - cconvert->pub.color_convert = null_convert; - else + if (cinfo->in_color_space != JCS_CMYK) ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + cconvert->pub.color_convert = null_convert; break; case JCS_YCCK: if (cinfo->num_components != 4) ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) { + switch (cinfo->in_color_space) { + case JCS_CMYK: cconvert->pub.start_pass = rgb_ycc_start; cconvert->pub.color_convert = cmyk_ycck_convert; - } else if (cinfo->in_color_space == JCS_YCCK) + break; + case JCS_YCCK: cconvert->pub.color_convert = null_convert; - else + break; + default: ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } break; default: /* allow null conversion of JCS_UNKNOWN */ @@ -454,6 +597,5 @@ jinit_color_converter (j_compress_ptr cinfo) cinfo->num_components != cinfo->input_components) ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); cconvert->pub.color_convert = null_convert; - break; } } diff --git a/Jpeg/jcdctmgr.c b/jpeg-9d/jcdctmgr.c similarity index 50% rename from Jpeg/jcdctmgr.c rename to jpeg-9d/jcdctmgr.c index 03ffc8a..fafab91 100644 --- a/Jpeg/jcdctmgr.c +++ b/jpeg-9d/jcdctmgr.c @@ -2,6 +2,7 @@ * jcdctmgr.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -23,149 +24,42 @@ typedef struct { struct jpeg_forward_dct pub; /* public fields */ /* Pointer to the DCT routine actually in use */ - forward_DCT_method_ptr do_dct; - - /* The actual post-DCT divisors --- not identical to the quant table - * entries, because of scaling (especially for an unnormalized DCT). - * Each table is given in normal array order. - */ - DCTELEM * divisors[NUM_QUANT_TBLS]; + forward_DCT_method_ptr do_dct[MAX_COMPONENTS]; #ifdef DCT_FLOAT_SUPPORTED /* Same as above for the floating-point case. */ - float_DCT_method_ptr do_float_dct; - FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; + float_DCT_method_ptr do_float_dct[MAX_COMPONENTS]; #endif } my_fdct_controller; typedef my_fdct_controller * my_fdct_ptr; -/* - * Initialize for a processing pass. - * Verify that all referenced Q-tables are present, and set up - * the divisor table for each one. - * In the current implementation, DCT of all components is done during - * the first pass, even if only some components will be output in the - * first scan. Hence all components should be examined here. +/* The allocated post-DCT divisor tables -- big enough for any + * supported variant and not identical to the quant table entries, + * because of scaling (especially for an unnormalized DCT) -- + * are pointed to by dct_table in the per-component comp_info + * structures. Each table is given in normal array order. */ -METHODDEF(void) -start_pass_fdctmgr (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - int ci, qtblno, i; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - DCTELEM * dtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - qtblno = compptr->quant_tbl_no; - /* Make sure specified quantization table is present */ - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - qtbl = cinfo->quant_tbl_ptrs[qtblno]; - /* Compute divisors for this quant table */ - /* We may do this more than once for same table, but it's not a big deal */ - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - /* For LL&M IDCT method, divisors are equal to raw quantization - * coefficients multiplied by 8 (to counteract scaling). - */ - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; - } - break; +typedef union { + DCTELEM int_array[DCTSIZE2]; +#ifdef DCT_FLOAT_SUPPORTED + FAST_FLOAT float_array[DCTSIZE2]; #endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - */ -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS +} divisor_table; - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = (DCTELEM) - DESCALE(MULTIPLY16V16((JPEG_INT32) qtbl->quantval[i], - (JPEG_INT32) aanscales[i]), - CONST_BITS-3); - } - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - * What's actually stored is 1/divisor so that the inner loop can - * use a multiplication rather than a division. - */ - FAST_FLOAT * fdtbl; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - if (fdct->float_divisors[qtblno] == NULL) { - fdct->float_divisors[qtblno] = (FAST_FLOAT *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(FAST_FLOAT)); - } - fdtbl = fdct->float_divisors[qtblno]; - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fdtbl[i] = (FAST_FLOAT) - (1.0 / (((double) qtbl->quantval[i] * - aanscalefactor[row] * aanscalefactor[col] * 8.0))); - i++; - } - } - } - break; +/* The current scaled-DCT routines require ISLOW-style divisor tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef DCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif #endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} /* @@ -185,43 +79,16 @@ forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, { /* This routine is heavily used, so it's worth coding it tightly. */ my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - forward_DCT_method_ptr do_dct = fdct->do_dct; - DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; + forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index]; + DCTELEM * divisors = (DCTELEM *) compptr->dct_table; DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ JDIMENSION bi; sample_data += start_row; /* fold in the vertical offset once */ - for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { - /* Load data into workspace, applying unsigned->signed conversion */ - { register DCTELEM *workspaceptr; - register JSAMPROW elemptr; - register int elemr; - - workspaceptr = workspace; - for (elemr = 0; elemr < DCTSIZE; elemr++) { - elemptr = sample_data[elemr] + start_col; -#if DCTSIZE == 8 /* unroll the inner loop */ - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; -#else - { register int elemc; - for (elemc = DCTSIZE; elemc > 0; elemc--) { - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - } - } -#endif - } - } - + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { /* Perform the DCT */ - (*do_dct) (workspace); + (*do_dct) (workspace, sample_data, start_col); /* Quantize/descale the coefficients, and store into coef_blocks[] */ { register DCTELEM temp, qval; @@ -275,44 +142,16 @@ forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, { /* This routine is heavily used, so it's worth coding it tightly. */ my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - float_DCT_method_ptr do_dct = fdct->do_float_dct; - FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; + float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index]; + FAST_FLOAT * divisors = (FAST_FLOAT *) compptr->dct_table; FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ JDIMENSION bi; sample_data += start_row; /* fold in the vertical offset once */ - for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { - /* Load data into workspace, applying unsigned->signed conversion */ - { register FAST_FLOAT *workspaceptr; - register JSAMPROW elemptr; - register int elemr; - - workspaceptr = workspace; - for (elemr = 0; elemr < DCTSIZE; elemr++) { - elemptr = sample_data[elemr] + start_col; -#if DCTSIZE == 8 /* unroll the inner loop */ - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); -#else - { register int elemc; - for (elemc = DCTSIZE; elemc > 0; elemc--) { - *workspaceptr++ = (FAST_FLOAT) - (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - } - } -#endif - } - } - + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { /* Perform the DCT */ - (*do_dct) (workspace); + (*do_dct) (workspace, sample_data, start_col); /* Quantize/descale the coefficients, and store into coef_blocks[] */ { register FAST_FLOAT temp; @@ -338,50 +177,301 @@ forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, /* - * Initialize FDCT manager. + * Initialize for a processing pass. + * Verify that all referenced Q-tables are present, and set up + * the divisor table for each one. + * In the current implementation, DCT of all components is done during + * the first pass, even if only some components will be output in the + * first scan. Hence all components should be examined here. */ -GLOBAL(void) -jinit_forward_dct (j_compress_ptr cinfo) +METHODDEF(void) +start_pass_fdctmgr (j_compress_ptr cinfo) { - my_fdct_ptr fdct; - int i; - - fdct = (my_fdct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_fdct_controller)); - cinfo->fdct = (struct jpeg_forward_dct *) fdct; - fdct->pub.start_pass = start_pass_fdctmgr; + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + int ci, qtblno, i; + jpeg_component_info *compptr; + int method = 0; + JQUANT_TBL * qtbl; + DCTELEM * dtbl; - switch (cinfo->dct_method) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper DCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef DCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_1x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_2x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_3x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_4x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_5x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_6x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_7x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((9 << 8) + 9): + fdct->do_dct[ci] = jpeg_fdct_9x9; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_10x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((11 << 8) + 11): + fdct->do_dct[ci] = jpeg_fdct_11x11; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_12x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((13 << 8) + 13): + fdct->do_dct[ci] = jpeg_fdct_13x13; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_14x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((15 << 8) + 15): + fdct->do_dct[ci] = jpeg_fdct_15x15; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_16x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_16x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_14x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_12x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_10x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_8x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_6x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_4x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_2x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_8x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_7x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_6x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_5x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_4x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_3x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_2x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((1 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_1x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { #ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - fdct->pub.forward_DCT = forward_DCT; - fdct->do_dct = jpeg_fdct_islow; - break; + case JDCT_ISLOW: + fdct->do_dct[ci] = jpeg_fdct_islow; + method = JDCT_ISLOW; + break; #endif #ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - fdct->pub.forward_DCT = forward_DCT; - fdct->do_dct = jpeg_fdct_ifast; - break; + case JDCT_IFAST: + fdct->do_dct[ci] = jpeg_fdct_ifast; + method = JDCT_IFAST; + break; #endif #ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - fdct->pub.forward_DCT = forward_DCT_float; - fdct->do_float_dct = jpeg_fdct_float; - break; + case JDCT_FLOAT: + fdct->do_float_dct[ci] = jpeg_fdct_float; + method = JDCT_FLOAT; + break; #endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + qtblno = compptr->quant_tbl_no; + /* Make sure specified quantization table is present */ + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + qtbl = cinfo->quant_tbl_ptrs[qtblno]; + /* Create divisor table from quant table */ + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + /* For LL&M IDCT method, divisors are equal to raw quantization + * coefficients multiplied by 8 (to counteract scaling). + */ + dtbl = (DCTELEM *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = + ((DCTELEM) qtbl->quantval[i]) << (compptr->component_needed ? 4 : 3); + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + */ +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS - /* Mark divisor tables unallocated */ - for (i = 0; i < NUM_QUANT_TBLS; i++) { - fdct->divisors[i] = NULL; + dtbl = (DCTELEM *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = (DCTELEM) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + compptr->component_needed ? CONST_BITS-4 : CONST_BITS-3); + } + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif #ifdef DCT_FLOAT_SUPPORTED - fdct->float_divisors[i] = NULL; + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + * What's actually stored is 1/divisor so that the inner loop can + * use a multiplication rather than a division. + */ + FAST_FLOAT * fdtbl = (FAST_FLOAT *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fdtbl[i] = (FAST_FLOAT) + (1.0 / ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * + (compptr->component_needed ? 16.0 : 8.0))); + i++; + } + } + } + fdct->pub.forward_DCT[ci] = forward_DCT_float; + break; #endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize FDCT manager. + */ + +GLOBAL(void) +jinit_forward_dct (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct; + int ci; + jpeg_component_info *compptr; + + fdct = (my_fdct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_fdct_controller)); + cinfo->fdct = &fdct->pub; + fdct->pub.start_pass = start_pass_fdctmgr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate a divisor table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(divisor_table)); } } diff --git a/jpeg-9d/jchuff.c b/jpeg-9d/jchuff.c new file mode 100644 index 0000000..02fc275 --- /dev/null +++ b/jpeg-9d/jchuff.c @@ -0,0 +1,1640 @@ +/* + * jchuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy encoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting output suspension. + * If the data destination module demands suspension, we want to be able to + * back up to the start of the current MCU. To do this, we copy state + * variables into local working storage, and update them back to the + * permanent JPEG objects only upon successful completion of an MCU. + * + * We do not support output suspension for the progressive JPEG mode, since + * the library currently does not allow multiple-scan files to be written + * with output suspension. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* The legal range of a DCT coefficient is + * -1024 .. +1023 for 8-bit data; + * -16384 .. +16383 for 12-bit data. + * Hence the magnitude should always fit in 10 or 14 bits respectively. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MAX_COEF_BITS 10 +#else +#define MAX_COEF_BITS 14 +#endif + +/* Derived data constructed for each Huffman table */ + +typedef struct { + unsigned int ehufco[256]; /* code for each symbol */ + char ehufsi[256]; /* length of code for each symbol */ + /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ +} c_derived_tbl; + + +/* Expanded entropy encoder object for Huffman encoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + INT32 put_buffer; /* current bit-accumulation buffer */ + int put_bits; /* # of bits now in it */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).put_buffer = (src).put_buffer, \ + (dest).put_bits = (src).put_bits, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + savable_state saved; /* Bit buffer & DC state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Statistics tables for optimization */ + long * dc_count_ptrs[NUM_HUFF_TBLS]; + long * ac_count_ptrs[NUM_HUFF_TBLS]; + + /* Following fields used only in progressive mode */ + + /* Mode flag: TRUE for optimization, FALSE for actual data output */ + boolean gather_statistics; + + /* next_output_byte/free_in_buffer are local copies of cinfo->dest fields. + */ + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ + + /* Coding status for AC components */ + int ac_tbl_no; /* the table number of the single component */ + unsigned int EOBRUN; /* run length of EOBs */ + unsigned int BE; /* # of buffered correction bits before MCU */ + char * bit_buffer; /* buffer for correction bits (1 per char) */ + /* packing correction bits tightly would save some space but cost time... */ +} huff_entropy_encoder; + +typedef huff_entropy_encoder * huff_entropy_ptr; + +/* Working state while writing an MCU (sequential mode). + * This struct contains all the fields that are needed by subroutines. + */ + +typedef struct { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + savable_state cur; /* Current bit buffer & DC state */ + j_compress_ptr cinfo; /* dump_buffer needs access to this */ +} working_state; + +/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit + * buffer can hold. Larger sizes may slightly improve compression, but + * 1000 is already well into the realm of overkill. + * The minimum safe size is 64 bits. + */ + +#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, + c_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + c_derived_tbl *dtbl; + int p, i, l, lastp, si, maxsymbol; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + htbl = jpeg_std_huff_table((j_common_ptr) cinfo, isDC, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (c_derived_tbl *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(c_derived_tbl)); + dtbl = *pdtbl; + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + lastp = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure C.3: generate encoding tables */ + /* These are code and size indexed by symbol value */ + + /* Set all codeless symbols to have code length 0; + * this lets us detect duplicate VAL entries here, and later + * allows emit_bits to detect any attempt to emit such symbols. + */ + MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); + + /* This is also a convenient place to check for out-of-range + * and duplicated VAL entries. We allow 0..255 for AC symbols + * but only 0..15 for DC. (We could constrain them further + * based on data depth and mode, but this seems enough.) + */ + maxsymbol = isDC ? 15 : 255; + + for (p = 0; p < lastp; p++) { + i = htbl->huffval[p]; + if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + dtbl->ehufco[i] = huffcode[p]; + dtbl->ehufsi[i] = huffsize[p]; + } +} + + +/* Outputting bytes to the file. + * NB: these must be called only when actually outputting, + * that is, entropy->gather_statistics == FALSE. + */ + +/* Emit a byte, taking 'action' if must suspend. */ +#define emit_byte_s(state,val,action) \ + { *(state)->next_output_byte++ = (JOCTET) (val); \ + if (--(state)->free_in_buffer == 0) \ + if (! dump_buffer_s(state)) \ + { action; } } + +/* Emit a byte */ +#define emit_byte_e(entropy,val) \ + { *(entropy)->next_output_byte++ = (JOCTET) (val); \ + if (--(entropy)->free_in_buffer == 0) \ + dump_buffer_e(entropy); } + + +LOCAL(boolean) +dump_buffer_s (working_state * state) +/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ +{ + struct jpeg_destination_mgr * dest = state->cinfo->dest; + + if (! (*dest->empty_output_buffer) (state->cinfo)) + return FALSE; + /* After a successful buffer dump, must reset buffer pointers */ + state->next_output_byte = dest->next_output_byte; + state->free_in_buffer = dest->free_in_buffer; + return TRUE; +} + + +LOCAL(void) +dump_buffer_e (huff_entropy_ptr entropy) +/* Empty the output buffer; we do not support suspension in this case. */ +{ + struct jpeg_destination_mgr * dest = entropy->cinfo->dest; + + if (! (*dest->empty_output_buffer) (entropy->cinfo)) + ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); + /* After a successful buffer dump, must reset buffer pointers */ + entropy->next_output_byte = dest->next_output_byte; + entropy->free_in_buffer = dest->free_in_buffer; +} + + +/* Outputting bits to the file */ + +/* Only the right 24 bits of put_buffer are used; the valid bits are + * left-justified in this part. At most 16 bits can be passed to emit_bits + * in one call, and we never retain more than 7 bits in put_buffer + * between calls, so 24 bits are sufficient. + */ + +INLINE +LOCAL(boolean) +emit_bits_s (working_state * state, unsigned int code, int size) +/* Emit some bits; return TRUE if successful, FALSE if must suspend */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer; + register int put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); + + /* mask off any extra bits in code */ + put_buffer = ((INT32) code) & ((((INT32) 1) << size) - 1); + + /* new number of bits in buffer */ + put_bits = size + state->cur.put_bits; + + put_buffer <<= 24 - put_bits; /* align incoming bits */ + + /* and merge with old buffer contents */ + put_buffer |= state->cur.put_buffer; + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_s(state, c, return FALSE); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_s(state, 0, return FALSE); + } + put_buffer <<= 8; + put_bits -= 8; + } + + state->cur.put_buffer = put_buffer; /* update state variables */ + state->cur.put_bits = put_bits; + + return TRUE; +} + + +INLINE +LOCAL(void) +emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size) +/* Emit some bits, unless we are in gather mode */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer; + register int put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + if (entropy->gather_statistics) + return; /* do nothing if we're only getting stats */ + + /* mask off any extra bits in code */ + put_buffer = ((INT32) code) & ((((INT32) 1) << size) - 1); + + /* new number of bits in buffer */ + put_bits = size + entropy->saved.put_bits; + + put_buffer <<= 24 - put_bits; /* align incoming bits */ + + /* and merge with old buffer contents */ + put_buffer |= entropy->saved.put_buffer; + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_e(entropy, c); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_e(entropy, 0); + } + put_buffer <<= 8; + put_bits -= 8; + } + + entropy->saved.put_buffer = put_buffer; /* update variables */ + entropy->saved.put_bits = put_bits; +} + + +LOCAL(boolean) +flush_bits_s (working_state * state) +{ + if (! emit_bits_s(state, 0x7F, 7)) /* fill any partial byte with ones */ + return FALSE; + state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ + state->cur.put_bits = 0; + return TRUE; +} + + +LOCAL(void) +flush_bits_e (huff_entropy_ptr entropy) +{ + emit_bits_e(entropy, 0x7F, 7); /* fill any partial byte with ones */ + entropy->saved.put_buffer = 0; /* and reset bit-buffer to empty */ + entropy->saved.put_bits = 0; +} + + +/* + * Emit (or just count) a Huffman symbol. + */ + +INLINE +LOCAL(void) +emit_dc_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->dc_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->dc_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +INLINE +LOCAL(void) +emit_ac_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->ac_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->ac_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +/* + * Emit bits from a correction bit buffer. + */ + +LOCAL(void) +emit_buffered_bits (huff_entropy_ptr entropy, char * bufstart, + unsigned int nbits) +{ + if (entropy->gather_statistics) + return; /* no real work */ + + while (nbits > 0) { + emit_bits_e(entropy, (unsigned int) (*bufstart), 1); + bufstart++; + nbits--; + } +} + + +/* + * Emit any pending EOBRUN symbol. + */ + +LOCAL(void) +emit_eobrun (huff_entropy_ptr entropy) +{ + register int temp, nbits; + + if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ + temp = entropy->EOBRUN; + nbits = 0; + while ((temp >>= 1)) + nbits++; + /* safety check: shouldn't happen given limited correction-bit buffer */ + if (nbits > 14) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + emit_ac_symbol(entropy, entropy->ac_tbl_no, nbits << 4); + if (nbits) + emit_bits_e(entropy, entropy->EOBRUN, nbits); + + entropy->EOBRUN = 0; + + /* Emit any buffered correction bits */ + emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); + entropy->BE = 0; + } +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(boolean) +emit_restart_s (working_state * state, int restart_num) +{ + int ci; + + if (! flush_bits_s(state)) + return FALSE; + + emit_byte_s(state, 0xFF, return FALSE); + emit_byte_s(state, JPEG_RST0 + restart_num, return FALSE); + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) + state->cur.last_dc_val[ci] = 0; + + /* The restart counter is not updated until we successfully write the MCU. */ + + return TRUE; +} + + +LOCAL(void) +emit_restart_e (huff_entropy_ptr entropy, int restart_num) +{ + int ci; + + emit_eobrun(entropy); + + if (! entropy->gather_statistics) { + flush_bits_e(entropy); + emit_byte_e(entropy, 0xFF); + emit_byte_e(entropy, JPEG_RST0 + restart_num); + } + + if (entropy->cinfo->Ss == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + } else { + /* Re-initialize all AC-related fields to 0 */ + entropy->EOBRUN = 0; + entropy->BE = 0; + } +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + int blkn, ci, tbl; + ISHIFT_TEMPS + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + temp = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al); + + /* DC differences are figured on the point-transformed values. */ + temp2 = temp - entropy->saved.last_dc_val[ci]; + entropy->saved.last_dc_val[ci] = temp; + + /* Encode the DC coefficient difference per section G.1.2.1 */ + temp = temp2; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit the Huffman-coded symbol for the number of bits */ + emit_dc_symbol(entropy, tbl, nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + register int temp, temp2; + register int nbits; + register int r, k; + int Se, Al; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ + + r = 0; /* r = run length of zeros */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = (*block)[natural_order[k]]) == 0) { + r++; + continue; + } + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value; so the code is + * interwoven with finding the abs value (temp) and output bits (temp2). + */ + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ + temp2 = ~temp; + } else { + temp >>= Al; /* apply the point transform */ + temp2 = temp; + } + /* Watch out for case that nonzero coef is zero after point transform */ + if (temp == 0) { + r++; + continue; + } + + /* Emit any pending EOBRUN */ + if (entropy->EOBRUN > 0) + emit_eobrun(entropy); + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + + r = 0; /* reset zero run length */ + } + + if (r > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + if (entropy->EOBRUN == 0x7FFF) + emit_eobrun(entropy); /* force it out to avoid overflow */ + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int Al, blkn; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Al = cinfo->Al; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* We simply emit the Al'th bit of the DC coefficient value. */ + emit_bits_e(entropy, (unsigned int) (MCU_data[blkn][0][0] >> Al), 1); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + register int temp; + register int r, k; + int Se, Al; + int EOB; + char *BR_buffer; + unsigned int BR; + int absvalues[DCTSIZE2]; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* It is convenient to make a pre-pass to determine the transformed + * coefficients' absolute values and the EOB position. + */ + EOB = 0; + for (k = cinfo->Ss; k <= Se; k++) { + temp = (*block)[natural_order[k]]; + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if (temp < 0) + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + absvalues[k] = temp; /* save abs value for main pass */ + if (temp == 1) + EOB = k; /* EOB = index of last newly-nonzero coef */ + } + + /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ + + r = 0; /* r = run length of zeros */ + BR = 0; /* BR = count of buffered bits added now */ + BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = absvalues[k]) == 0) { + r++; + continue; + } + + /* Emit any required ZRLs, but not if they can be folded into EOB */ + while (r > 15 && k <= EOB) { + /* emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + /* Emit ZRL */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + /* Emit buffered correction bits that must be associated with ZRL */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + } + + /* If the coef was previously nonzero, it only needs a correction bit. + * NOTE: a straight translation of the spec's figure G.7 would suggest + * that we also need to test r > 15. But if r > 15, we can only get here + * if k > EOB, which implies that this coefficient is not 1. + */ + if (temp > 1) { + /* The correction bit is the next bit of the absolute value. */ + BR_buffer[BR++] = (char) (temp & 1); + continue; + } + + /* Emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); + + /* Emit output bit for newly-nonzero coef */ + temp = ((*block)[natural_order[k]] < 0) ? 0 : 1; + emit_bits_e(entropy, (unsigned int) temp, 1); + + /* Emit buffered correction bits that must be associated with this code */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + r = 0; /* reset zero run length */ + } + + if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + entropy->BE += BR; /* concat my correction bits to older ones */ + /* We force out the EOB if we risk either: + * 1. overflow of the EOB counter; + * 2. overflow of the correction bit buffer during the next MCU. + */ + if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) + emit_eobrun(entropy); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* Encode a single block's worth of coefficients */ + +LOCAL(boolean) +encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, + c_derived_tbl *dctbl, c_derived_tbl *actbl) +{ + register int temp, temp2; + register int nbits; + register int r, k; + int Se = state->cinfo->lim_Se; + const int * natural_order = state->cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = temp2 = block[0] - last_dc_val; + + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit the Huffman-coded symbol for the number of bits */ + if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp2 = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) + return FALSE; + r -= 16; + } + + temp = temp2; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit Huffman symbol for run length / number of bits */ + temp = (r << 4) + nbits; + if (! emit_bits_s(state, actbl->ehufco[temp], actbl->ehufsi[temp])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + if (! emit_bits_s(state, actbl->ehufco[0], actbl->ehufsi[0])) + return FALSE; + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of Huffman-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + int blkn, ci; + jpeg_component_info * compptr; + + /* Load up working state */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! emit_restart_s(&state, entropy->next_restart_num)) + return FALSE; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + if (! encode_one_block(&state, + MCU_data[blkn][0], state.cur.last_dc_val[ci], + entropy->dc_derived_tbls[compptr->dc_tbl_no], + entropy->ac_derived_tbls[compptr->ac_tbl_no])) + return FALSE; + /* Update last_dc_val */ + state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + /* Completed MCU, so update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + + if (cinfo->progressive_mode) { + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Flush out any buffered data */ + emit_eobrun(entropy); + flush_bits_e(entropy); + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + } else { + /* Load up working state ... flush_bits needs it */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Flush out the last data */ + if (! flush_bits_s(&state)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + } +} + + +/* + * Huffman coding optimization. + * + * We first scan the supplied data and count the number of uses of each symbol + * that is to be Huffman-coded. (This process MUST agree with the code above.) + * Then we build a Huffman coding tree for the observed counts. + * Symbols which are not needed at all for the particular image are not + * assigned any code, which saves space in the DHT marker as well as in + * the compressed data. + */ + + +/* Process a single block's worth of coefficients */ + +LOCAL(void) +htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, + long dc_counts[], long ac_counts[]) +{ + register int temp; + register int nbits; + register int r, k; + int Se = cinfo->lim_Se; + const int * natural_order = cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = block[0] - last_dc_val; + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count the Huffman symbol for the number of bits */ + dc_counts[nbits]++; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + ac_counts[0xF0]++; + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count Huffman symbol for run length / number of bits */ + ac_counts[(r << 4) + nbits]++; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + ac_counts[0]++; +} + + +/* + * Trial-encode one MCU's worth of Huffman-compressed coefficients. + * No data is actually output, so no suspension return is possible. + */ + +METHODDEF(boolean) +encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn, ci; + jpeg_component_info * compptr; + + /* Take care of restart intervals if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Update restart state */ + entropy->restarts_to_go = cinfo->restart_interval; + } + entropy->restarts_to_go--; + } + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], + entropy->dc_count_ptrs[compptr->dc_tbl_no], + entropy->ac_count_ptrs[compptr->ac_tbl_no]); + entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + return TRUE; +} + + +/* + * Generate the best Huffman code table for the given counts, fill htbl. + * + * The JPEG standard requires that no symbol be assigned a codeword of all + * one bits (so that padding bits added at the end of a compressed segment + * can't look like a valid code). Because of the canonical ordering of + * codewords, this just means that there must be an unused slot in the + * longest codeword length category. Section K.2 of the JPEG spec suggests + * reserving such a slot by pretending that symbol 256 is a valid symbol + * with count 1. In theory that's not optimal; giving it count zero but + * including it in the symbol set anyway should give a better Huffman code. + * But the theoretically better code actually seems to come out worse in + * practice, because it produces more all-ones bytes (which incur stuffed + * zero bytes in the final file). In any case the difference is tiny. + * + * The JPEG standard requires Huffman codes to be no more than 16 bits long. + * If some symbols have a very small but nonzero probability, the Huffman tree + * must be adjusted to meet the code length restriction. We currently use + * the adjustment method suggested in JPEG section K.2. This method is *not* + * optimal; it may not choose the best possible limited-length code. But + * typically only very-low-frequency symbols will be given less-than-optimal + * lengths, so the code is almost optimal. Experimental comparisons against + * an optimal limited-length-code algorithm indicate that the difference is + * microscopic --- usually less than a hundredth of a percent of total size. + * So the extra complexity of an optimal algorithm doesn't seem worthwhile. + */ + +LOCAL(void) +jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) +{ +#define MAX_CLEN 32 /* assumed maximum initial code length */ + UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ + int codesize[257]; /* codesize[k] = code length of symbol k */ + int others[257]; /* next symbol in current branch of tree */ + int c1, c2, i, j; + UINT8 *p; + long v; + + freq[256] = 1; /* make sure 256 has a nonzero count */ + /* Including the pseudo-symbol 256 in the Huffman procedure guarantees + * that no real symbol is given code-value of all ones, because 256 + * will be placed last in the largest codeword category. + * In the symbol list build procedure this element serves as sentinel + * for the zero run loop. + */ + +#ifndef DONT_USE_FANCY_HUFF_OPT + + /* Build list of symbols sorted in order of descending frequency */ + /* This approach has several benefits (thank to John Korejwa for the idea): + * 1. + * If a codelength category is split during the length limiting procedure + * below, the feature that more frequent symbols are assigned shorter + * codewords remains valid for the adjusted code. + * 2. + * To reduce consecutive ones in a Huffman data stream (thus reducing the + * number of stuff bytes in JPEG) it is preferable to follow 0 branches + * (and avoid 1 branches) as much as possible. This is easily done by + * assigning symbols to leaves of the Huffman tree in order of decreasing + * frequency, with no secondary sort based on codelengths. + * 3. + * The symbol list can be built independently from the assignment of code + * lengths by the Huffman procedure below. + * Note: The symbol list build procedure must be performed first, because + * the Huffman procedure assigning the codelengths clobbers the frequency + * counts! + */ + + /* Here we use the others array as a linked list of nonzero frequencies + * to be sorted. Already sorted elements are removed from the list. + */ + + /* Building list */ + + /* This item does not correspond to a valid symbol frequency and is used + * as starting index. + */ + j = 256; + + for (i = 0;; i++) { + if (freq[i] == 0) /* skip zero frequencies */ + continue; + if (i > 255) + break; + others[j] = i; /* this symbol value */ + j = i; /* previous symbol value */ + } + others[j] = -1; /* mark end of list */ + + /* Sorting list */ + + p = htbl->huffval; + while ((c1 = others[256]) >= 0) { + v = freq[c1]; + i = c1; /* first symbol value */ + j = 256; /* pseudo symbol value for starting index */ + while ((c2 = others[c1]) >= 0) { + if (freq[c2] > v) { + v = freq[c2]; + i = c2; /* this symbol value */ + j = c1; /* previous symbol value */ + } + c1 = c2; + } + others[j] = others[i]; /* remove this symbol i from list */ + *p++ = (UINT8) i; + } + +#endif /* DONT_USE_FANCY_HUFF_OPT */ + + /* This algorithm is explained in section K.2 of the JPEG standard */ + + MEMZERO(bits, SIZEOF(bits)); + MEMZERO(codesize, SIZEOF(codesize)); + for (i = 0; i < 257; i++) + others[i] = -1; /* init links to empty */ + + /* Huffman's basic algorithm to assign optimal code lengths to symbols */ + + for (;;) { + /* Find the smallest nonzero frequency, set c1 = its symbol */ + /* In case of ties, take the larger symbol number */ + c1 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v) { + v = freq[i]; + c1 = i; + } + } + + /* Find the next smallest nonzero frequency, set c2 = its symbol */ + /* In case of ties, take the larger symbol number */ + c2 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v && i != c1) { + v = freq[i]; + c2 = i; + } + } + + /* Done if we've merged everything into one frequency */ + if (c2 < 0) + break; + + /* Else merge the two counts/trees */ + freq[c1] += freq[c2]; + freq[c2] = 0; + + /* Increment the codesize of everything in c1's tree branch */ + codesize[c1]++; + while (others[c1] >= 0) { + c1 = others[c1]; + codesize[c1]++; + } + + others[c1] = c2; /* chain c2 onto c1's tree branch */ + + /* Increment the codesize of everything in c2's tree branch */ + codesize[c2]++; + while (others[c2] >= 0) { + c2 = others[c2]; + codesize[c2]++; + } + } + + /* Now count the number of symbols of each code length */ + for (i = 0; i <= 256; i++) { + if (codesize[i]) { + /* The JPEG standard seems to think that this can't happen, */ + /* but I'm paranoid... */ + if (codesize[i] > MAX_CLEN) + ERREXIT(cinfo, JERR_HUFF_CLEN_OUTOFBOUNDS); + + bits[codesize[i]]++; + } + } + + /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure + * Huffman procedure assigned any such lengths, we must adjust the coding. + * Here is what the JPEG spec says about how this next bit works: + * Since symbols are paired for the longest Huffman code, the symbols are + * removed from this length category two at a time. The prefix for the pair + * (which is one bit shorter) is allocated to one of the pair; then, + * skipping the BITS entry for that prefix length, a code word from the next + * shortest nonzero BITS entry is converted into a prefix for two code words + * one bit longer. + */ + + for (i = MAX_CLEN; i > 16; i--) { + while (bits[i] > 0) { + j = i - 2; /* find length of new prefix to be used */ + while (bits[j] == 0) { + if (j == 0) + ERREXIT(cinfo, JERR_HUFF_CLEN_OUTOFBOUNDS); + j--; + } + + bits[i] -= 2; /* remove two symbols */ + bits[i-1]++; /* one goes in this length */ + bits[j+1] += 2; /* two new symbols in this length */ + bits[j]--; /* symbol of this length is now a prefix */ + } + } + + /* Remove the count for the pseudo-symbol 256 from the largest codelength */ + while (bits[i] == 0) /* find largest codelength still in use */ + i--; + bits[i]--; + + /* Return final symbol counts (only for lengths 0..16) */ + MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); + +#ifdef DONT_USE_FANCY_HUFF_OPT + + /* Return a list of the symbols sorted by code length */ + /* Note: Due to the codelength changes made above, it can happen + * that more frequent symbols are assigned longer codewords. + */ + p = htbl->huffval; + for (i = 1; i <= MAX_CLEN; i++) { + for (j = 0; j <= 255; j++) { + if (codesize[j] == i) { + *p++ = (UINT8) j; + } + } + } + +#endif /* DONT_USE_FANCY_HUFF_OPT */ + + /* Set sent_table FALSE so updated table will be written to JPEG file. */ + htbl->sent_table = FALSE; +} + + +/* + * Finish up a statistics-gathering pass and create the new Huffman tables. + */ + +METHODDEF(void) +finish_pass_gather (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + JHUFF_TBL **htblptr; + boolean did_dc[NUM_HUFF_TBLS]; + boolean did_ac[NUM_HUFF_TBLS]; + + if (cinfo->progressive_mode) + /* Flush out buffered data (all we care about is counting the EOB symbol) */ + emit_eobrun(entropy); + + /* It's important not to apply jpeg_gen_optimal_table more than once + * per table, because it clobbers the input frequency counts! + */ + MEMZERO(did_dc, SIZEOF(did_dc)); + MEMZERO(did_ac, SIZEOF(did_ac)); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (! did_dc[tbl]) { + htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[tbl]); + did_dc[tbl] = TRUE; + } + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (! did_ac[tbl]) { + htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[tbl]); + did_ac[tbl] = TRUE; + } + } + } +} + + +/* + * Initialize for a Huffman-compressed scan. + * If gather_statistics is TRUE, we do not output anything during the scan, + * just count the Huffman symbols used and generate Huffman code tables. + */ + +METHODDEF(void) +start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + entropy->pub.finish_pass = finish_pass_gather; + else + entropy->pub.finish_pass = finish_pass_huff; + + if (cinfo->progressive_mode) { + entropy->cinfo = cinfo; + entropy->gather_statistics = gather_statistics; + + /* We assume jcmaster.c already validated the scan parameters. */ + + /* Select execution routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else { + entropy->pub.encode_mcu = encode_mcu_AC_refine; + /* AC refinement needs a correction bit buffer */ + if (entropy->bit_buffer == NULL) + entropy->bit_buffer = (char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, MAX_CORR_BITS * SIZEOF(char)); + } + } + + /* Initialize AC stuff */ + entropy->ac_tbl_no = cinfo->cur_comp_info[0]->ac_tbl_no; + entropy->EOBRUN = 0; + entropy->BE = 0; + } else { + if (gather_statistics) + entropy->pub.encode_mcu = encode_mcu_gather; + else + entropy->pub.encode_mcu = encode_mcu_huff; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (gather_statistics) { + /* Check for invalid table index */ + /* (make_c_derived_tbl does this in the other path) */ + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + /* Allocate and zero the statistics tables */ + /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ + if (entropy->dc_count_ptrs[tbl] == NULL) + entropy->dc_count_ptrs[tbl] = (long *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, 257 * SIZEOF(long)); + MEMZERO(entropy->dc_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_c_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (gather_statistics) { + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + if (entropy->ac_count_ptrs[tbl] == NULL) + entropy->ac_count_ptrs[tbl] = (long *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, 257 * SIZEOF(long)); + MEMZERO(entropy->ac_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + jpeg_make_c_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + } + } + + /* Initialize bit buffer to empty */ + entropy->saved.put_buffer = 0; + entropy->saved.put_bits = 0; + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for Huffman entropy encoding. + */ + +GLOBAL(void) +jinit_huff_encoder (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(huff_entropy_encoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass_huff; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; + } + + if (cinfo->progressive_mode) + entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ +} diff --git a/jpeg-9d/jcinit.c b/jpeg-9d/jcinit.c new file mode 100644 index 0000000..2aea7ca --- /dev/null +++ b/jpeg-9d/jcinit.c @@ -0,0 +1,249 @@ +/* + * jcinit.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2003-2017 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains initialization logic for the JPEG compressor. + * This routine is in charge of selecting the modules to be executed and + * making an initialization call to each one. + * + * Logically, this code belongs in jcmaster.c. It's split out because + * linking this routine implies linking the entire compression library. + * For a transcoding-only application, we want to be able to use jcmaster.c + * without linking in the whole library. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Compute JPEG image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ + /* Sanity check on input image dimensions to prevent overflow in + * following calculations. + * We do check jpeg_width and jpeg_height in initial_setup in jcmaster.c, + * but image_width and image_height can come from arbitrary data, + * and we need some space for multiplication by block_size. + */ + if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24)) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + +#ifdef DCT_SCALING_SUPPORTED + + /* Compute actual JPEG image dimensions and DCT scaling choices. */ + if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/1 scaling */ + cinfo->jpeg_width = cinfo->image_width * cinfo->block_size; + cinfo->jpeg_height = cinfo->image_height * cinfo->block_size; + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/2 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/3 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/4 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/5 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/6 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/7 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/8 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/9 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/10 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/11 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/12 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/13 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/14 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/15 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide block_size/16 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + +#else /* !DCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->jpeg_width = cinfo->image_width; + cinfo->jpeg_height = cinfo->image_height; + cinfo->min_DCT_h_scaled_size = DCTSIZE; + cinfo->min_DCT_v_scaled_size = DCTSIZE; + +#endif /* DCT_SCALING_SUPPORTED */ +} + + +/* + * Master selection of compression modules. + * This is done once at the start of processing an image. We determine + * which modules will be used and give them appropriate initialization calls. + */ + +GLOBAL(void) +jinit_compress_master (j_compress_ptr cinfo) +{ + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Sanity check on input image dimensions */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 || + cinfo->input_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Width of an input scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Compute JPEG image dimensions and related values. */ + jpeg_calc_jpeg_dimensions(cinfo); + + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, FALSE /* full compression */); + + /* Preprocessing */ + if (! cinfo->raw_data_in) { + jinit_color_converter(cinfo); + jinit_downsampler(cinfo); + jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); + } + /* Forward DCT */ + jinit_forward_dct(cinfo); + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* Need a full-image coefficient buffer in any multi-pass mode. */ + jinit_c_coef_controller(cinfo, + (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); + jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} diff --git a/Jpeg/jcmainct.c b/jpeg-9d/jcmainct.c similarity index 68% rename from Jpeg/jcmainct.c rename to jpeg-9d/jcmainct.c index 42846cb..39b9790 100644 --- a/Jpeg/jcmainct.c +++ b/jpeg-9d/jcmainct.c @@ -2,6 +2,7 @@ * jcmainct.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2012 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -30,7 +31,7 @@ typedef struct { JDIMENSION cur_iMCU_row; /* number of current iMCU row */ JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ - wxjpeg_boolean suspended; /* remember if we suspended output */ + boolean suspended; /* remember if we suspended output */ J_BUF_MODE pass_mode; /* current operating mode */ /* If using just a strip buffer, this points to the entire set of buffers @@ -68,32 +69,32 @@ METHODDEF(void) process_data_buffer_main METHODDEF(void) start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) { - my_main_ptr mymain = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; /* Do nothing in raw-data mode. */ if (cinfo->raw_data_in) return; - mymain->cur_iMCU_row = 0; /* initialize counters */ - mymain->rowgroup_ctr = 0; - mymain->suspended = FALSE; - mymain->pass_mode = pass_mode; /* save mode for use by process_data */ + mainp->cur_iMCU_row = 0; /* initialize counters */ + mainp->rowgroup_ctr = 0; + mainp->suspended = FALSE; + mainp->pass_mode = pass_mode; /* save mode for use by process_data */ switch (pass_mode) { case JBUF_PASS_THRU: #ifdef FULL_MAIN_BUFFER_SUPPORTED - if (mymain->whole_image[0] != NULL) + if (mainp->whole_image[0] != NULL) ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); #endif - mymain->pub.process_data = process_data_simple_main; + mainp->pub.process_data = process_data_simple_main; break; #ifdef FULL_MAIN_BUFFER_SUPPORTED case JBUF_SAVE_SOURCE: case JBUF_CRANK_DEST: case JBUF_SAVE_AND_PASS: - if (mymain->whole_image[0] == NULL) + if (mainp->whole_image[0] == NULL) ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - mymain->pub.process_data = process_data_buffer_main; + mainp->pub.process_data = process_data_buffer_main; break; #endif default: @@ -114,46 +115,46 @@ process_data_simple_main (j_compress_ptr cinfo, JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail) { - my_main_ptr mymain = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; - while (mymain->cur_iMCU_row < cinfo->total_iMCU_rows) { + while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) { /* Read input data if we haven't filled the main buffer yet */ - if (mymain->rowgroup_ctr < DCTSIZE) + if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) (*cinfo->prep->pre_process_data) (cinfo, input_buf, in_row_ctr, in_rows_avail, - mymain->buffer, &mymain->rowgroup_ctr, - (JDIMENSION) DCTSIZE); + mainp->buffer, &mainp->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); /* If we don't have a full iMCU row buffered, return to application for * more data. Note that preprocessor will always pad to fill the iMCU row * at the bottom of the image. */ - if (mymain->rowgroup_ctr != DCTSIZE) + if (mainp->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size) return; /* Send the completed row to the compressor */ - if (! (*cinfo->coef->compress_data) (cinfo, mymain->buffer)) { + if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) { /* If compressor did not consume the whole row, then we must need to * suspend processing and return to the application. In this situation * we pretend we didn't yet consume the last input row; otherwise, if * it happened to be the last row of the image, the application would * think we were done. */ - if (! mymain->suspended) { + if (! mainp->suspended) { (*in_row_ctr)--; - mymain->suspended = TRUE; + mainp->suspended = TRUE; } return; } /* We did finish the row. Undo our little suspension hack if a previous * call suspended; then mark the main buffer empty. */ - if (mymain->suspended) { + if (mainp->suspended) { (*in_row_ctr)++; - mymain->suspended = FALSE; + mainp->suspended = FALSE; } - mymain->rowgroup_ctr = 0; - mymain->cur_iMCU_row++; + mainp->rowgroup_ctr = 0; + mainp->cur_iMCU_row++; } } @@ -170,25 +171,27 @@ process_data_buffer_main (j_compress_ptr cinfo, JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail) { - my_main_ptr mymain = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; int ci; jpeg_component_info *compptr; - wxjpeg_boolean writing = (mymain->pass_mode != JBUF_CRANK_DEST); + boolean writing = (mainp->pass_mode != JBUF_CRANK_DEST); - while (mymain->cur_iMCU_row < cinfo->total_iMCU_rows) { + while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) { /* Realign the virtual buffers if at the start of an iMCU row. */ - if (mymain->rowgroup_ctr == 0) { + if (mainp->rowgroup_ctr == 0) { for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - mymain->buffer[ci] = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, mymain->whole_image[ci], - mymain->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE), - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing); + mainp->buffer[ci] = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, mainp->whole_image[ci], mainp->cur_iMCU_row * + ((JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size)), + (JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size), + writing); } /* In a read pass, pretend we just read some source data. */ if (! writing) { - *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE; - mymain->rowgroup_ctr = DCTSIZE; + *in_row_ctr += (JDIMENSION) + (cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size); + mainp->rowgroup_ctr = (JDIMENSION) cinfo->min_DCT_v_scaled_size; } } @@ -197,40 +200,40 @@ process_data_buffer_main (j_compress_ptr cinfo, if (writing) { (*cinfo->prep->pre_process_data) (cinfo, input_buf, in_row_ctr, in_rows_avail, - mymain->buffer, &mymain->rowgroup_ctr, - (JDIMENSION) DCTSIZE); + mainp->buffer, &mainp->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); /* Return to application if we need more data to fill the iMCU row. */ - if (mymain->rowgroup_ctr < DCTSIZE) + if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) return; } /* Emit data, unless this is a sink-only pass. */ - if (mymain->pass_mode != JBUF_SAVE_SOURCE) { - if (! (*cinfo->coef->compress_data) (cinfo, mymain->buffer)) { + if (mainp->pass_mode != JBUF_SAVE_SOURCE) { + if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) { /* If compressor did not consume the whole row, then we must need to * suspend processing and return to the application. In this situation * we pretend we didn't yet consume the last input row; otherwise, if * it happened to be the last row of the image, the application would * think we were done. */ - if (! mymain->suspended) { + if (! mainp->suspended) { (*in_row_ctr)--; - mymain->suspended = TRUE; + mainp->suspended = TRUE; } return; } /* We did finish the row. Undo our little suspension hack if a previous * call suspended; then mark the main buffer empty. */ - if (mymain->suspended) { + if (mainp->suspended) { (*in_row_ctr)++; - mymain->suspended = FALSE; + mainp->suspended = FALSE; } } /* If get here, we are done with this iMCU row. Mark buffer empty. */ - mymain->rowgroup_ctr = 0; - mymain->cur_iMCU_row++; + mainp->rowgroup_ctr = 0; + mainp->cur_iMCU_row++; } } @@ -242,17 +245,17 @@ process_data_buffer_main (j_compress_ptr cinfo, */ GLOBAL(void) -jinit_c_main_controller (j_compress_ptr cinfo, wxjpeg_boolean need_full_buffer) +jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) { - my_main_ptr mymain; + my_main_ptr mainp; int ci; jpeg_component_info *compptr; - mymain = (my_main_ptr) + mainp = (my_main_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_c_main_controller *) mymain; - mymain->pub.start_pass = start_pass_main; + cinfo->main = &mainp->pub; + mainp->pub.start_pass = start_pass_main; /* We don't need to create a buffer in raw-data mode. */ if (cinfo->raw_data_in) @@ -267,27 +270,28 @@ jinit_c_main_controller (j_compress_ptr cinfo, wxjpeg_boolean need_full_buffer) /* Note we pad the bottom to a multiple of the iMCU height */ for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - mymain->whole_image[ci] = (*cinfo->mem->request_virt_sarray) + mainp->whole_image[ci] = (*cinfo->mem->request_virt_sarray) ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - compptr->width_in_blocks * DCTSIZE, - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor) * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + ((JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor)) * + ((JDIMENSION) cinfo->min_DCT_v_scaled_size), + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); } #else ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); #endif } else { #ifdef FULL_MAIN_BUFFER_SUPPORTED - mymain->whole_image[0] = NULL; /* flag for no virtual arrays */ + mainp->whole_image[0] = NULL; /* flag for no virtual arrays */ #endif /* Allocate a strip buffer for each component */ for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - mymain->buffer[ci] = (*cinfo->mem->alloc_sarray) + mainp->buffer[ci] = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); } } } diff --git a/Jpeg/jcmarker.c b/jpeg-9d/jcmarker.c similarity index 78% rename from Jpeg/jcmarker.c rename to jpeg-9d/jcmarker.c index b6d987a..8874cd8 100644 --- a/Jpeg/jcmarker.c +++ b/jpeg-9d/jcmarker.c @@ -2,6 +2,7 @@ * jcmarker.c * * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -18,24 +19,24 @@ typedef enum { /* JPEG marker codes */ M_SOF1 = 0xc1, M_SOF2 = 0xc2, M_SOF3 = 0xc3, - + M_SOF5 = 0xc5, M_SOF6 = 0xc6, M_SOF7 = 0xc7, - + M_JPG = 0xc8, M_SOF9 = 0xc9, M_SOF10 = 0xca, M_SOF11 = 0xcb, - + M_SOF13 = 0xcd, M_SOF14 = 0xce, M_SOF15 = 0xcf, - + M_DHT = 0xc4, - + M_DAC = 0xcc, - + M_RST0 = 0xd0, M_RST1 = 0xd1, M_RST2 = 0xd2, @@ -44,7 +45,7 @@ typedef enum { /* JPEG marker codes */ M_RST5 = 0xd5, M_RST6 = 0xd6, M_RST7 = 0xd7, - + M_SOI = 0xd8, M_EOI = 0xd9, M_SOS = 0xda, @@ -53,7 +54,7 @@ typedef enum { /* JPEG marker codes */ M_DRI = 0xdd, M_DHP = 0xde, M_EXP = 0xdf, - + M_APP0 = 0xe0, M_APP1 = 0xe1, M_APP2 = 0xe2, @@ -70,13 +71,14 @@ typedef enum { /* JPEG marker codes */ M_APP13 = 0xed, M_APP14 = 0xee, M_APP15 = 0xef, - + M_JPG0 = 0xf0, + M_JPG8 = 0xf8, M_JPG13 = 0xfd, M_COM = 0xfe, - + M_TEM = 0x01, - + M_ERROR = 0x100 } JPEG_MARKER; @@ -153,21 +155,22 @@ emit_dqt (j_compress_ptr cinfo, int index) ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); prec = 0; - for (i = 0; i < DCTSIZE2; i++) { - if (qtbl->quantval[i] > 255) + for (i = 0; i <= cinfo->lim_Se; i++) { + if (qtbl->quantval[cinfo->natural_order[i]] > 255) prec = 1; } if (! qtbl->sent_table) { emit_marker(cinfo, M_DQT); - emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2); + emit_2bytes(cinfo, + prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2); emit_byte(cinfo, index + (prec<<4)); - for (i = 0; i < DCTSIZE2; i++) { + for (i = 0; i <= cinfo->lim_Se; i++) { /* The table entries must be emitted in zigzag order. */ - unsigned int qval = qtbl->quantval[jpeg_natural_order[i]]; + unsigned int qval = qtbl->quantval[cinfo->natural_order[i]]; if (prec) emit_byte(cinfo, (int) (qval >> 8)); emit_byte(cinfo, (int) (qval & 0xFF)); @@ -181,7 +184,7 @@ emit_dqt (j_compress_ptr cinfo, int index) LOCAL(void) -emit_dht (j_compress_ptr cinfo, int index, wxjpeg_boolean is_ac) +emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) /* Emit a DHT marker */ { JHUFF_TBL * htbl; @@ -229,32 +232,38 @@ emit_dac (j_compress_ptr cinfo) char ac_in_use[NUM_ARITH_TBLS]; int length, i; jpeg_component_info *compptr; - + for (i = 0; i < NUM_ARITH_TBLS; i++) dc_in_use[i] = ac_in_use[i] = 0; - + for (i = 0; i < cinfo->comps_in_scan; i++) { compptr = cinfo->cur_comp_info[i]; - dc_in_use[compptr->dc_tbl_no] = 1; - ac_in_use[compptr->ac_tbl_no] = 1; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + dc_in_use[compptr->dc_tbl_no] = 1; + /* AC needs no table when not present */ + if (cinfo->Se) + ac_in_use[compptr->ac_tbl_no] = 1; } - + length = 0; for (i = 0; i < NUM_ARITH_TBLS; i++) length += dc_in_use[i] + ac_in_use[i]; - - emit_marker(cinfo, M_DAC); - - emit_2bytes(cinfo, length*2 + 2); - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - if (dc_in_use[i]) { - emit_byte(cinfo, i); - emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); - } - if (ac_in_use[i]) { - emit_byte(cinfo, i + 0x10); - emit_byte(cinfo, cinfo->arith_ac_K[i]); + + if (length) { + emit_marker(cinfo, M_DAC); + + emit_2bytes(cinfo, length*2 + 2); + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + if (dc_in_use[i]) { + emit_byte(cinfo, i); + emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); + } + if (ac_in_use[i]) { + emit_byte(cinfo, i + 0x10); + emit_byte(cinfo, cinfo->arith_ac_K[i]); + } } } #endif /* C_ARITH_CODING_SUPPORTED */ @@ -273,6 +282,37 @@ emit_dri (j_compress_ptr cinfo) } +LOCAL(void) +emit_lse_ict (j_compress_ptr cinfo) +/* Emit an LSE inverse color transform specification marker */ +{ + /* Support only 1 transform */ + if (cinfo->color_transform != JCT_SUBTRACT_GREEN || + cinfo->num_components < 3) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + emit_marker(cinfo, M_JPG8); + + emit_2bytes(cinfo, 24); /* fixed length */ + + emit_byte(cinfo, 0x0D); /* ID inverse transform specification */ + emit_2bytes(cinfo, MAXJSAMPLE); /* MAXTRANS */ + emit_byte(cinfo, 3); /* Nt=3 */ + emit_byte(cinfo, cinfo->comp_info[1].component_id); + emit_byte(cinfo, cinfo->comp_info[0].component_id); + emit_byte(cinfo, cinfo->comp_info[2].component_id); + emit_byte(cinfo, 0x80); /* F1: CENTER1=1, NORM1=0 */ + emit_2bytes(cinfo, 0); /* A(1,1)=0 */ + emit_2bytes(cinfo, 0); /* A(1,2)=0 */ + emit_byte(cinfo, 0); /* F2: CENTER2=0, NORM2=0 */ + emit_2bytes(cinfo, 1); /* A(2,1)=1 */ + emit_2bytes(cinfo, 0); /* A(2,2)=0 */ + emit_byte(cinfo, 0); /* F3: CENTER3=0, NORM3=0 */ + emit_2bytes(cinfo, 1); /* A(3,1)=1 */ + emit_2bytes(cinfo, 0); /* A(3,2)=0 */ +} + + LOCAL(void) emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) /* Emit a SOF marker */ @@ -285,13 +325,13 @@ emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ /* Make sure image isn't bigger than SOF field can handle */ - if ((long) cinfo->image_height > 65535L || - (long) cinfo->image_width > 65535L) + if ((long) cinfo->jpeg_height > 65535L || + (long) cinfo->jpeg_width > 65535L) ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); emit_byte(cinfo, cinfo->data_precision); - emit_2bytes(cinfo, (int) cinfo->image_height); - emit_2bytes(cinfo, (int) cinfo->image_width); + emit_2bytes(cinfo, (int) cinfo->jpeg_height); + emit_2bytes(cinfo, (int) cinfo->jpeg_width); emit_byte(cinfo, cinfo->num_components); @@ -320,22 +360,16 @@ emit_sos (j_compress_ptr cinfo) for (i = 0; i < cinfo->comps_in_scan; i++) { compptr = cinfo->cur_comp_info[i]; emit_byte(cinfo, compptr->component_id); - td = compptr->dc_tbl_no; - ta = compptr->ac_tbl_no; - if (cinfo->progressive_mode) { - /* Progressive mode: only DC or only AC tables are used in one scan; - * furthermore, Huffman coding of DC refinement uses no table at all. - * We emit 0 for unused field(s); this is recommended by the P&M text - * but does not seem to be specified in the standard. - */ - if (cinfo->Ss == 0) { - ta = 0; /* DC scan */ - if (cinfo->Ah != 0 && !cinfo->arith_code) - td = 0; /* no DC table either */ - } else { - td = 0; /* AC scan */ - } - } + + /* We emit 0 for unused field(s); this is recommended by the P&M text + * but does not seem to be specified in the standard. + */ + + /* DC needs no table for refinement scan */ + td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0; + /* AC needs no table when not present */ + ta = cinfo->Se ? compptr->ac_tbl_no : 0; + emit_byte(cinfo, (td << 4) + ta); } @@ -345,6 +379,22 @@ emit_sos (j_compress_ptr cinfo) } +LOCAL(void) +emit_pseudo_sos (j_compress_ptr cinfo) +/* Emit a pseudo SOS marker */ +{ + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 + 1 + 3); /* length */ + + emit_byte(cinfo, 0); /* Ns */ + + emit_byte(cinfo, 0); /* Ss */ + emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */ + emit_byte(cinfo, 0); /* Ah/Al */ +} + + LOCAL(void) emit_jfif_app0 (j_compress_ptr cinfo) /* Emit a JFIF-compliant APP0 marker */ @@ -421,7 +471,6 @@ emit_adobe_app14 (j_compress_ptr cinfo) break; default: emit_byte(cinfo, 0); /* Color transform = 0 */ - break; } } @@ -458,8 +507,8 @@ write_marker_byte (j_compress_ptr cinfo, int val) * Write datastream header. * This consists of an SOI and optional APPn markers. * We recommend use of the JFIF marker, but not the Adobe marker, - * when using YCbCr or grayscale data. The JFIF marker should NOT - * be used for any other JPEG colorspace. The Adobe marker is helpful + * when using YCbCr or grayscale data. The JFIF marker is also used + * for other standard JPEG colorspaces. The Adobe marker is helpful * to distinguish RGB, CMYK, and YCCK colorspaces. * Note that an application can write additional header markers after * jpeg_start_compress returns. @@ -484,7 +533,8 @@ write_file_header (j_compress_ptr cinfo) /* * Write frame header. - * This consists of DQT and SOFn markers. + * This consists of DQT and SOFn markers, + * a conditional LSE marker and a conditional pseudo SOS marker. * Note that we do not emit the SOF until we have emitted the DQT(s). * This avoids compatibility problems with incorrect implementations that * try to error-check the quant table numbers as soon as they see the SOF. @@ -494,7 +544,7 @@ METHODDEF(void) write_frame_header (j_compress_ptr cinfo) { int ci, prec; - wxjpeg_boolean is_baseline; + boolean is_baseline; jpeg_component_info *compptr; /* Emit DQT for each quantization table. @@ -511,7 +561,7 @@ write_frame_header (j_compress_ptr cinfo) * Note we assume that Huffman table numbers won't be changed later. */ if (cinfo->arith_code || cinfo->progressive_mode || - cinfo->data_precision != 8) { + cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) { is_baseline = FALSE; } else { is_baseline = TRUE; @@ -529,7 +579,10 @@ write_frame_header (j_compress_ptr cinfo) /* Emit the proper SOF marker */ if (cinfo->arith_code) { - emit_sof(cinfo, M_SOF9); /* SOF code for arithmetic coding */ + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */ + else + emit_sof(cinfo, M_SOF9); /* SOF code for sequential arithmetic */ } else { if (cinfo->progressive_mode) emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ @@ -538,6 +591,14 @@ write_frame_header (j_compress_ptr cinfo) else emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ } + + /* Check to emit LSE inverse color transform specification marker */ + if (cinfo->color_transform) + emit_lse_ict(cinfo); + + /* Check to emit pseudo SOS marker */ + if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE) + emit_pseudo_sos(cinfo); } @@ -566,19 +627,12 @@ write_scan_header (j_compress_ptr cinfo) */ for (i = 0; i < cinfo->comps_in_scan; i++) { compptr = cinfo->cur_comp_info[i]; - if (cinfo->progressive_mode) { - /* Progressive mode: only DC or only AC tables are used in one scan */ - if (cinfo->Ss == 0) { - if (cinfo->Ah == 0) /* DC needs no table for refinement scan */ - emit_dht(cinfo, compptr->dc_tbl_no, FALSE); - } else { - emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } - } else { - /* Sequential mode: need both DC and AC tables */ + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) emit_dht(cinfo, compptr->dc_tbl_no, FALSE); + /* AC needs no table when not present */ + if (cinfo->Se) emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } } } @@ -647,10 +701,9 @@ jinit_marker_writer (j_compress_ptr cinfo) my_marker_ptr marker; /* Create the subobject */ - marker = (my_marker_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_marker_writer)); - cinfo->marker = (struct jpeg_marker_writer *) marker; + marker = (my_marker_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_marker_writer)); + cinfo->marker = &marker->pub; /* Initialize method pointers */ marker->pub.write_file_header = write_file_header; marker->pub.write_frame_header = write_frame_header; diff --git a/Jpeg/jcmaster.c b/jpeg-9d/jcmaster.c similarity index 74% rename from Jpeg/jcmaster.c rename to jpeg-9d/jcmaster.c index af88779..89dcf78 100644 --- a/Jpeg/jcmaster.c +++ b/jpeg-9d/jcmaster.c @@ -2,6 +2,7 @@ * jcmaster.c * * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2003-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -46,29 +47,40 @@ LOCAL(void) initial_setup (j_compress_ptr cinfo) /* Do computations that are needed before master selection phase */ { - int ci; + int ci, ssize; jpeg_component_info *compptr; - long samplesperrow; - JDIMENSION jd_samplesperrow; + + /* Sanity check on block_size */ + if (cinfo->block_size < 1 || cinfo->block_size > 16) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size); + + /* Derive natural_order from block_size */ + switch (cinfo->block_size) { + case 2: cinfo->natural_order = jpeg_natural_order2; break; + case 3: cinfo->natural_order = jpeg_natural_order3; break; + case 4: cinfo->natural_order = jpeg_natural_order4; break; + case 5: cinfo->natural_order = jpeg_natural_order5; break; + case 6: cinfo->natural_order = jpeg_natural_order6; break; + case 7: cinfo->natural_order = jpeg_natural_order7; break; + default: cinfo->natural_order = jpeg_natural_order; + } + + /* Derive lim_Se from block_size */ + cinfo->lim_Se = cinfo->block_size < DCTSIZE ? + cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1; /* Sanity check on image dimensions */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0 || cinfo->input_components <= 0) + if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 || + cinfo->num_components <= 0) ERREXIT(cinfo, JERR_EMPTY_IMAGE); /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION) ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - /* Width of an input scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) + /* Only 8 to 12 bits data precision are supported for DCT based JPEG */ + if (cinfo->data_precision < 8 || cinfo->data_precision > 12) ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); /* Check that number of components won't exceed internal array sizes */ @@ -95,32 +107,68 @@ initial_setup (j_compress_ptr cinfo) ci++, compptr++) { /* Fill in the correct component_index value; don't rely on application */ compptr->component_index = ci; - /* For compression, we never do DCT scaling. */ - compptr->DCT_scaled_size = DCTSIZE; + /* In selecting the actual DCT scaling for each component, we try to + * scale down the chroma components via DCT scaling rather than downsampling. + * This saves time if the downsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + if (! cinfo->raw_data_in) + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == + 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + if (! cinfo->raw_data_in) + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == + 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support DCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + /* Size in DCT blocks */ compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); + jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); + jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); /* Size in samples */ compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); + jdiv_round_up((long) cinfo->jpeg_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed (this flag isn't actually used for compression) */ - compptr->component_needed = TRUE; + jdiv_round_up((long) cinfo->jpeg_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Don't need quantization scale after DCT, + * until color conversion says otherwise. + */ + compptr->component_needed = FALSE; } /* Compute number of fully interleaved MCU rows (number of times that * main controller will call coefficient controller). */ cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); } @@ -135,7 +183,7 @@ validate_script (j_compress_ptr cinfo) const jpeg_scan_info * scanptr; int scanno, ncomps, ci, coefi, thisi; int Ss, Se, Ah, Al; - wxjpeg_boolean component_sent[MAX_COMPONENTS]; + boolean component_sent[MAX_COMPONENTS]; #ifdef C_PROGRESSIVE_SUPPORTED int * last_bitpos_ptr; int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; @@ -192,13 +240,9 @@ validate_script (j_compress_ptr cinfo) * out-of-range reconstructed DC values during the first DC scan, * which might cause problems for some decoders. */ -#if BITS_IN_JSAMPLE == 8 -#define MAX_AH_AL 10 -#else -#define MAX_AH_AL 13 -#endif if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || - Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) + Ah < 0 || Ah > (cinfo->data_precision > 8 ? 13 : 10) || + Al < 0 || Al > (cinfo->data_precision > 8 ? 13 : 10)) ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); if (Ss == 0) { if (Se != 0) /* DC and AC together not OK */ @@ -260,6 +304,39 @@ validate_script (j_compress_ptr cinfo) } } + +LOCAL(void) +reduce_script (j_compress_ptr cinfo) +/* Adapt scan script for use with reduced block size; + * assume that script has been validated before. + */ +{ + jpeg_scan_info * scanptr; + int idxout, idxin; + + /* Circumvent const declaration for this function */ + scanptr = (jpeg_scan_info *) cinfo->scan_info; + idxout = 0; + + for (idxin = 0; idxin < cinfo->num_scans; idxin++) { + /* After skipping, idxout becomes smaller than idxin */ + if (idxin != idxout) + /* Copy rest of data; + * note we stay in given chunk of allocated memory. + */ + scanptr[idxout] = scanptr[idxin]; + if (scanptr[idxout].Ss > cinfo->lim_Se) + /* Entire scan out of range - skip this entry */ + continue; + if (scanptr[idxout].Se > cinfo->lim_Se) + /* Limit scan to end of block */ + scanptr[idxout].Se = cinfo->lim_Se; + idxout++; + } + + cinfo->num_scans = idxout; +} + #endif /* C_MULTISCAN_FILES_SUPPORTED */ @@ -280,10 +357,13 @@ select_scan_parameters (j_compress_ptr cinfo) cinfo->cur_comp_info[ci] = &cinfo->comp_info[scanptr->component_index[ci]]; } - cinfo->Ss = scanptr->Ss; - cinfo->Se = scanptr->Se; - cinfo->Ah = scanptr->Ah; - cinfo->Al = scanptr->Al; + if (cinfo->progressive_mode) { + cinfo->Ss = scanptr->Ss; + cinfo->Se = scanptr->Se; + cinfo->Ah = scanptr->Ah; + cinfo->Al = scanptr->Al; + return; + } } else #endif @@ -296,11 +376,11 @@ select_scan_parameters (j_compress_ptr cinfo) for (ci = 0; ci < cinfo->num_components; ci++) { cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; } - cinfo->Ss = 0; - cinfo->Se = DCTSIZE2-1; - cinfo->Ah = 0; - cinfo->Al = 0; } + cinfo->Ss = 0; + cinfo->Se = cinfo->block_size * cinfo->block_size - 1; + cinfo->Ah = 0; + cinfo->Al = 0; } @@ -325,7 +405,7 @@ per_scan_setup (j_compress_ptr cinfo) compptr->MCU_width = 1; compptr->MCU_height = 1; compptr->MCU_blocks = 1; - compptr->MCU_sample_width = DCTSIZE; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; compptr->last_col_width = 1; /* For noninterleaved scans, it is convenient to define last_row_height * as the number of block rows present in the last iMCU row. @@ -347,11 +427,11 @@ per_scan_setup (j_compress_ptr cinfo) /* Overall image size in MCUs */ cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); + jdiv_round_up((long) cinfo->jpeg_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); cinfo->blocks_in_MCU = 0; @@ -361,7 +441,7 @@ per_scan_setup (j_compress_ptr cinfo) compptr->MCU_width = compptr->h_samp_factor; compptr->MCU_height = compptr->v_samp_factor; compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; /* Figure number of non-dummy blocks in last MCU column & row */ tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); if (tmp == 0) tmp = compptr->MCU_width; @@ -433,7 +513,7 @@ prepare_for_pass (j_compress_ptr cinfo) /* Do Huffman optimization for a scan after the first one. */ select_scan_parameters(cinfo); per_scan_setup(cinfo); - if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) { + if (cinfo->Ss != 0 || cinfo->Ah == 0) { (*cinfo->entropy->start_pass) (cinfo, TRUE); (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); master->pub.call_pass_startup = FALSE; @@ -540,14 +620,13 @@ finish_pass_master (j_compress_ptr cinfo) */ GLOBAL(void) -jinit_c_master_control (j_compress_ptr cinfo, wxjpeg_boolean transcode_only) +jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) { my_master_ptr master; - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_comp_master)); - cinfo->master = (struct jpeg_comp_master *) master; + master = (my_master_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_comp_master)); + cinfo->master = &master->pub; master->pub.prepare_for_pass = prepare_for_pass; master->pub.pass_startup = pass_startup; master->pub.finish_pass = finish_pass_master; @@ -559,6 +638,8 @@ jinit_c_master_control (j_compress_ptr cinfo, wxjpeg_boolean transcode_only) if (cinfo->scan_info != NULL) { #ifdef C_MULTISCAN_FILES_SUPPORTED validate_script(cinfo); + if (cinfo->block_size < DCTSIZE) + reduce_script(cinfo); #else ERREXIT(cinfo, JERR_NOT_COMPILED); #endif @@ -567,8 +648,14 @@ jinit_c_master_control (j_compress_ptr cinfo, wxjpeg_boolean transcode_only) cinfo->num_scans = 1; } - if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */ - cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */ + if (cinfo->optimize_coding) + cinfo->arith_code = FALSE; /* disable arithmetic coding */ + else if (! cinfo->arith_code && + (cinfo->progressive_mode || + (cinfo->block_size > 1 && cinfo->block_size < DCTSIZE))) + /* TEMPORARY HACK ??? */ + /* assume default tables no good for progressive or reduced AC mode */ + cinfo->optimize_coding = TRUE; /* force Huffman optimization */ /* Initialize my private state */ if (transcode_only) { diff --git a/jpeg-9d/jcomapi.c b/jpeg-9d/jcomapi.c new file mode 100644 index 0000000..678c5d1 --- /dev/null +++ b/jpeg-9d/jcomapi.c @@ -0,0 +1,244 @@ +/* + * jcomapi.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface routines that are used for both + * compression and decompression. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Abort processing of a JPEG compression or decompression operation, + * but don't destroy the object itself. + * + * For this, we merely clean up all the nonpermanent memory pools. + * Note that temp files (virtual arrays) are not allowed to belong to + * the permanent pool, so we will be able to close all temp files here. + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_abort (j_common_ptr cinfo) +{ + int pool; + + /* Do nothing if called on a not-initialized or destroyed JPEG object. */ + if (cinfo->mem == NULL) + return; + + /* Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { + (*cinfo->mem->free_pool) (cinfo, pool); + } + + /* Reset overall state for possible reuse of object */ + if (cinfo->is_decompressor) { + cinfo->global_state = DSTATE_START; + /* Try to keep application from accessing now-deleted marker list. + * A bit kludgy to do it here, but this is the most central place. + */ + ((j_decompress_ptr) cinfo)->marker_list = NULL; + } else { + cinfo->global_state = CSTATE_START; + } +} + + +/* + * Destruction of a JPEG object. + * + * Everything gets deallocated except the master jpeg_compress_struct itself + * and the error manager struct. Both of these are supplied by the application + * and must be freed, if necessary, by the application. (Often they are on + * the stack and so don't need to be freed anyway.) + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_destroy (j_common_ptr cinfo) +{ + /* We need only tell the memory manager to release everything. */ + /* NB: mem pointer is NULL if memory mgr failed to initialize. */ + if (cinfo->mem != NULL) + (*cinfo->mem->self_destruct) (cinfo); + cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ + cinfo->global_state = 0; /* mark it destroyed */ +} + + +/* + * Convenience routines for allocating quantization and Huffman tables. + * (Would jutils.c be a more reasonable place to put these?) + */ + +GLOBAL(JQUANT_TBL *) +jpeg_alloc_quant_table (j_common_ptr cinfo) +{ + JQUANT_TBL *tbl; + + tbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +GLOBAL(JHUFF_TBL *) +jpeg_alloc_huff_table (j_common_ptr cinfo) +{ + JHUFF_TBL *tbl; + + tbl = (JHUFF_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +/* + * Set up the standard Huffman tables (cf. JPEG standard section K.3). + * IMPORTANT: these are only valid for 8-bit data precision! + * (Would jutils.c be a more reasonable place to put this?) + */ + +GLOBAL(JHUFF_TBL *) +jpeg_std_huff_table (j_common_ptr cinfo, boolean isDC, int tblno) +{ + JHUFF_TBL **htblptr, *htbl; + const UINT8 *bits, *val; + int nsymbols, len; + + static const UINT8 bits_dc_luminance[17] = + { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_luminance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_dc_chrominance[17] = + { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_chrominance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_ac_luminance[17] = + { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; + static const UINT8 val_ac_luminance[] = + { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, + 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, + 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, + 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, + 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, + 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, + 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, + 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, + 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, + 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, + 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, + 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + static const UINT8 bits_ac_chrominance[17] = + { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; + static const UINT8 val_ac_chrominance[] = + { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, + 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, + 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, + 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, + 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, + 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, + 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, + 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, + 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, + 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, + 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, + 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + if (cinfo->is_decompressor) { + if (isDC) + htblptr = ((j_decompress_ptr) cinfo)->dc_huff_tbl_ptrs; + else + htblptr = ((j_decompress_ptr) cinfo)->ac_huff_tbl_ptrs; + } else { + if (isDC) + htblptr = ((j_compress_ptr) cinfo)->dc_huff_tbl_ptrs; + else + htblptr = ((j_compress_ptr) cinfo)->ac_huff_tbl_ptrs; + } + + switch (tblno) { + case 0: + if (isDC) { + bits = bits_dc_luminance; + val = val_dc_luminance; + } else { + bits = bits_ac_luminance; + val = val_ac_luminance; + } + break; + case 1: + if (isDC) { + bits = bits_dc_chrominance; + val = val_dc_chrominance; + } else { + bits = bits_ac_chrominance; + val = val_ac_chrominance; + } + break; + default: + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + return NULL; /* avoid compiler warnings for uninitialized variables */ + } + + if (htblptr[tblno] == NULL) + htblptr[tblno] = jpeg_alloc_huff_table(cinfo); + + htbl = htblptr[tblno]; + + /* Copy the number-of-symbols-of-each-code-length counts */ + MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); + + /* Validate the counts. We do this here mainly so we can copy the right + * number of symbols from the val[] array, without risking marching off + * the end of memory. jxhuff.c will do a more thorough test later. + */ + nsymbols = 0; + for (len = 1; len <= 16; len++) + nsymbols += bits[len]; + if (nsymbols > 256) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + if (nsymbols > 0) + MEMCOPY(htbl->huffval, val, nsymbols * SIZEOF(UINT8)); + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + htbl->sent_table = FALSE; + + return htbl; +} diff --git a/jpeg-9d/jconfig.bcc b/jpeg-9d/jconfig.bcc new file mode 100644 index 0000000..e4da3d7 --- /dev/null +++ b/jpeg-9d/jconfig.bcc @@ -0,0 +1,48 @@ +/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#ifdef __MSDOS__ +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#endif +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#ifdef __MSDOS__ +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */ +#endif + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Borland has setmode() */ +#ifdef __MSDOS__ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#endif +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.cfg b/jpeg-9d/jconfig.cfg new file mode 100644 index 0000000..c4548fc --- /dev/null +++ b/jpeg-9d/jconfig.cfg @@ -0,0 +1,59 @@ +/* jconfig.cfg --- source file edited by configure script */ +/* see jconfig.txt for explanations */ + +#undef HAVE_PROTOTYPES +#undef HAVE_UNSIGNED_CHAR +#undef HAVE_UNSIGNED_SHORT +#undef void +#undef const +#undef CHAR_IS_UNSIGNED +#undef HAVE_STDDEF_H +#undef HAVE_STDLIB_H +#undef HAVE_LOCALE_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +/* Define this if you get warnings about undefined structures. */ +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not enum, on Windows systems. */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED +#undef INLINE +/* These are for configuring the JPEG memory manager. */ +#undef DEFAULT_MAX_MEM +#undef NO_MKTEMP + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ +#undef PROGRESS_REPORT + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.dj b/jpeg-9d/jconfig.dj new file mode 100644 index 0000000..a0d4092 --- /dev/null +++ b/jpeg-9d/jconfig.dj @@ -0,0 +1,38 @@ +/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in DJGPP */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/Jpeg/jconfig.vc b/jpeg-9d/jconfig.h similarity index 78% rename from Jpeg/jconfig.vc rename to jpeg-9d/jconfig.h index 7e291c7..e9d33e5 100644 --- a/Jpeg/jconfig.vc +++ b/jpeg-9d/jconfig.h @@ -1,5 +1,6 @@ -/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ -/* see jconfig.doc for explanations */ +/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 9x or NT. */ +/* This file also works for Borland C++ 32-bit (bcc32) on Windows 9x or NT. */ +/* see jconfig.txt for explanations */ #define HAVE_PROTOTYPES #define HAVE_UNSIGNED_CHAR @@ -15,10 +16,16 @@ #undef NEED_SHORT_EXTERNAL_NAMES #undef INCOMPLETE_TYPES_BROKEN -/* Define "boolean" as unsigned char, not int, per Windows custom */ +/* Define "boolean" as unsigned char, not enum, per Windows custom */ #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ typedef unsigned char boolean; #endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ diff --git a/jpeg-9d/jconfig.mac b/jpeg-9d/jconfig.mac new file mode 100644 index 0000000..70ed66c --- /dev/null +++ b/jpeg-9d/jconfig.mac @@ -0,0 +1,43 @@ +/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */ + +#define ALIGN_TYPE long /* Needed for 680x0 Macs */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define USE_CCOMMAND /* Command line reader for Macintosh */ +#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */ + +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.manx b/jpeg-9d/jconfig.manx new file mode 100644 index 0000000..cd529d7 --- /dev/null +++ b/jpeg-9d/jconfig.manx @@ -0,0 +1,43 @@ +/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#define signal_catcher _abort /* hack for Aztec C naming requirements */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.mc6 b/jpeg-9d/jconfig.mc6 new file mode 100644 index 0000000..6b05e81 --- /dev/null +++ b/jpeg-9d/jconfig.mc6 @@ -0,0 +1,52 @@ +/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ + +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ + +#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */ + +#define NEED_FHEAPMIN /* far heap management routines are broken */ + +#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */ +/* Note: the above define is known to improve the code with Microsoft C 6.00A. + * I do not know whether it is good for later compiler versions. + * Please report any info on this point to jpeg-info@jpegclub.org. + */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Microsoft has setmode() */ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.sas b/jpeg-9d/jconfig.sas new file mode 100644 index 0000000..b8a1819 --- /dev/null +++ b/jpeg-9d/jconfig.sas @@ -0,0 +1,43 @@ +/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define NO_MKTEMP /* SAS C doesn't have mktemp() */ + +#define SHORTxSHORT_32 /* produces better DCT code with SAS C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.st b/jpeg-9d/jconfig.st new file mode 100644 index 0000000..5afa0b6 --- /dev/null +++ b/jpeg-9d/jconfig.st @@ -0,0 +1,42 @@ +/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define ALIGN_TYPE long /* apparently double is a weird size? */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */ +/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define + * USE_SETMODE. Some Atari compilers require it, some do not. + */ +#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.txt b/jpeg-9d/jconfig.txt new file mode 100644 index 0000000..d1710ae --- /dev/null +++ b/jpeg-9d/jconfig.txt @@ -0,0 +1,171 @@ +/* + * jconfig.txt + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * Modified 2009-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file documents the configuration options that are required to + * customize the JPEG software for a particular system. + * + * The actual configuration options for a particular installation are stored + * in jconfig.h. On many machines, jconfig.h can be generated automatically + * or copied from one of the "canned" jconfig files that we supply. But if + * you need to generate a jconfig.h file by hand, this file tells you how. + * + * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. + * EDIT A COPY NAMED JCONFIG.H. + */ + + +/* + * These symbols indicate the properties of your machine or compiler. + * #define the symbol if yes, #undef it if no. + */ + +/* Does your compiler support function prototypes? + * (If not, you also need to use ansi2knr, see install.txt) + */ +#define HAVE_PROTOTYPES + +/* Does your compiler support the declaration "unsigned char" ? + * How about "unsigned short" ? + */ +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT + +/* Define "void" as "char" if your compiler doesn't know about type void. + * NOTE: be sure to define void such that "void *" represents the most general + * pointer type, e.g., that returned by malloc(). + */ +/* #define void char */ + +/* Define "const" as empty if your compiler doesn't know the "const" keyword. + */ +/* #define const */ + +/* Define this if an ordinary "char" type is unsigned. + * If you're not sure, leaving it undefined will work at some cost in speed. + * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. + */ +#undef CHAR_IS_UNSIGNED + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDDEF_H + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDLIB_H + +/* Define this if your system does not have an ANSI/SysV , + * but does have a BSD-style . + */ +#undef NEED_BSD_STRINGS + +/* Define this if your system does not provide typedef size_t in any of the + * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in + * instead. + */ +#undef NEED_SYS_TYPES_H + +/* For 80x86 machines, you need to define NEED_FAR_POINTERS, + * unless you are using a large-data memory model or 80386 flat-memory mode. + * On less brain-damaged CPUs this symbol must not be defined. + * (Defining this symbol causes large data structures to be referenced through + * "far" pointers and to be allocated with a special version of malloc.) + */ +#undef NEED_FAR_POINTERS + +/* Define this if your linker needs global names to be unique in less + * than the first 15 characters. + */ +#undef NEED_SHORT_EXTERNAL_NAMES + +/* Although a real ANSI C compiler can deal perfectly well with pointers to + * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI + * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, + * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you + * actually get "missing structure definition" warnings or errors while + * compiling the JPEG code. + */ +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not enum, on Windows systems. + */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + + +/* + * The following options affect code selection within the JPEG library, + * but they don't need to be visible to applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS has been defined. + */ + +#ifdef JPEG_INTERNALS + +/* Define this if your compiler implements ">>" on signed values as a logical + * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, + * which is the normal and rational definition. + */ +#undef RIGHT_SHIFT_IS_UNSIGNED + + +#endif /* JPEG_INTERNALS */ + + +/* + * The remaining options do not affect the JPEG library proper, + * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). + * Other applications can ignore these. + */ + +#ifdef JPEG_CJPEG_DJPEG + +/* These defines indicate which image (non-JPEG) file formats are allowed. */ + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +/* Define this if you want to name both input and output files on the command + * line, rather than using stdout and optionally stdin. You MUST do this if + * your system can't cope with binary I/O to stdin/stdout. See comments at + * head of cjpeg.c or djpeg.c. + */ +#undef TWO_FILE_COMMANDLINE + +/* Define this if your system needs explicit cleanup of temporary files. + * This is crucial under MS-DOS, where the temporary "files" may be areas + * of extended memory; on most other systems it's not as important. + */ +#undef NEED_SIGNAL_CATCHER + +/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). + * This is necessary on systems that distinguish text files from binary files, + * and is harmless on most systems that don't. If you have one of the rare + * systems that complains about the "b" spec, define this symbol. + */ +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. + */ +#undef PROGRESS_REPORT + + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.vms b/jpeg-9d/jconfig.vms new file mode 100644 index 0000000..8337b0b --- /dev/null +++ b/jpeg-9d/jconfig.vms @@ -0,0 +1,37 @@ +/* jconfig.vms --- jconfig.h for use on Digital VMS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* Needed on VMS */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg-9d/jconfig.wat b/jpeg-9d/jconfig.wat new file mode 100644 index 0000000..190cc75 --- /dev/null +++ b/jpeg-9d/jconfig.wat @@ -0,0 +1,38 @@ +/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#define CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in Watcom */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/Jpeg/jcparam.c b/jpeg-9d/jcparam.c similarity index 68% rename from Jpeg/jcparam.c rename to jpeg-9d/jcparam.c index 046bd87..3b7014f 100644 --- a/Jpeg/jcparam.c +++ b/jpeg-9d/jcparam.c @@ -2,6 +2,7 @@ * jcparam.c * * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -22,7 +23,7 @@ GLOBAL(void) jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, const unsigned int *basic_table, - int scale_factor, wxjpeg_boolean force_baseline) + int scale_factor, boolean force_baseline) /* Define a quantization table equal to the basic_table times * a scale factor (given as a percentage). * If force_baseline is TRUE, the computed quantization table entries @@ -60,40 +61,56 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, } +/* These are the sample quantization tables given in JPEG spec section K.1. + * The spec says that the values given produce "good" quality, and + * when divided by 2, "very good" quality. + */ +static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 +}; +static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 +}; + + +GLOBAL(void) +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and straight percentage-scaling quality scales. + * This entry point allows different scalings for luminance and chrominance. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + cinfo->q_scale_factor[0], force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + cinfo->q_scale_factor[1], force_baseline); +} + + GLOBAL(void) jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - wxjpeg_boolean force_baseline) + boolean force_baseline) /* Set or change the 'quality' (quantization) setting, using default tables * and a straight percentage-scaling quality scale. In most cases it's better * to use jpeg_set_quality (below); this entry point is provided for * applications that insist on a linear percentage scaling. */ { - /* These are the sample quantization tables given in JPEG spec section K.1. - * The spec says that the values given produce "good" quality, and - * when divided by 2, "very good" quality. - */ - static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { - 16, 11, 10, 16, 24, 40, 51, 61, - 12, 12, 14, 19, 26, 58, 60, 55, - 14, 13, 16, 24, 40, 57, 69, 56, - 14, 17, 22, 29, 51, 87, 80, 62, - 18, 22, 37, 56, 68, 109, 103, 77, - 24, 35, 55, 64, 81, 104, 113, 92, - 49, 64, 78, 87, 103, 121, 120, 101, - 72, 92, 95, 98, 112, 100, 103, 99 - }; - static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { - 17, 18, 24, 47, 99, 99, 99, 99, - 18, 21, 26, 66, 99, 99, 99, 99, - 24, 26, 56, 99, 99, 99, 99, 99, - 47, 66, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99 - }; - /* Set up two quantization tables using the specified scaling */ jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, scale_factor, force_baseline); @@ -129,11 +146,11 @@ jpeg_quality_scaling (int quality) GLOBAL(void) -jpeg_set_quality (j_compress_ptr cinfo, int quality, wxjpeg_boolean force_baseline) +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) /* Set or change the 'quality' (quantization) setting, using default tables. * This is the standard quality-adjusting entry point for typical user * interfaces; only those who want detailed control over quantization tables - * would use the preceding three routines directly. + * would use the preceding routines directly. */ { /* Convert user 0-100 rating to percentage scaling */ @@ -145,112 +162,23 @@ jpeg_set_quality (j_compress_ptr cinfo, int quality, wxjpeg_boolean force_baseli /* - * Huffman table setup routines + * Reset standard Huffman tables */ LOCAL(void) -add_huff_table (j_compress_ptr cinfo, - JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) -/* Define a Huffman table */ +std_huff_tables (j_compress_ptr cinfo) { - int nsymbols, len; + if (cinfo->dc_huff_tbl_ptrs[0] != NULL) + (void) jpeg_std_huff_table((j_common_ptr) cinfo, TRUE, 0); - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + if (cinfo->ac_huff_tbl_ptrs[0] != NULL) + (void) jpeg_std_huff_table((j_common_ptr) cinfo, FALSE, 0); - /* Copy the number-of-symbols-of-each-code-length counts */ - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + if (cinfo->dc_huff_tbl_ptrs[1] != NULL) + (void) jpeg_std_huff_table((j_common_ptr) cinfo, TRUE, 1); - /* Validate the counts. We do this here mainly so we can copy the right - * number of symbols from the val[] array, without risking marching off - * the end of memory. jchuff.c will do a more thorough test later. - */ - nsymbols = 0; - for (len = 1; len <= 16; len++) - nsymbols += bits[len]; - if (nsymbols < 1 || nsymbols > 256) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - - MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*htblptr)->sent_table = FALSE; -} - - -LOCAL(void) -std_huff_tables (j_compress_ptr cinfo) -/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ -/* IMPORTANT: these are only valid for 8-bit data precision! */ -{ - static const UINT8 bits_dc_luminance[17] = - { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_luminance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_dc_chrominance[17] = - { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_chrominance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_ac_luminance[17] = - { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; - static const UINT8 val_ac_luminance[] = - { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, - 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, - 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, - 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, - 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, - 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, - 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, - 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, - 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, - 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, - 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, - 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, - 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, - 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, - 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, - 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, - 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - static const UINT8 bits_ac_chrominance[17] = - { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; - static const UINT8 val_ac_chrominance[] = - { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, - 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, - 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, - 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, - 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, - 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, - 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, - 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, - 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, - 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, - 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, - 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, - 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, - 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], - bits_dc_luminance, val_dc_luminance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], - bits_ac_luminance, val_ac_luminance); - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], - bits_dc_chrominance, val_dc_chrominance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], - bits_ac_chrominance, val_ac_chrominance); + if (cinfo->ac_huff_tbl_ptrs[1] != NULL) + (void) jpeg_std_huff_table((j_common_ptr) cinfo, FALSE, 1); } @@ -284,10 +212,12 @@ jpeg_set_defaults (j_compress_ptr cinfo) /* Initialize everything not dependent on the color space */ + cinfo->scale_num = 1; /* 1:1 scaling */ + cinfo->scale_denom = 1; cinfo->data_precision = BITS_IN_JSAMPLE; /* Set up two quantization tables using default quality of 75 */ jpeg_set_quality(cinfo, 75, TRUE); - /* Set up two Huffman tables */ + /* Reset standard Huffman tables */ std_huff_tables(cinfo); /* Initialize default arithmetic coding conditioning */ @@ -304,22 +234,24 @@ jpeg_set_defaults (j_compress_ptr cinfo) /* Expect normal source image, not raw downsampled data */ cinfo->raw_data_in = FALSE; - /* Use Huffman coding, not arithmetic coding, by default */ - cinfo->arith_code = FALSE; + /* The standard Huffman tables are only valid for 8-bit data precision. + * If the precision is higher, use arithmetic coding. + * (Alternatively, using Huffman coding would be possible with forcing + * optimization on so that usable tables will be computed, or by + * supplying default tables that are valid for the desired precision.) + * Otherwise, use Huffman coding by default. + */ + cinfo->arith_code = cinfo->data_precision > 8 ? TRUE : FALSE; /* By default, don't do extra passes to optimize entropy coding */ cinfo->optimize_coding = FALSE; - /* The standard Huffman tables are only valid for 8-bit data precision. - * If the precision is higher, force optimization on so that usable - * tables will be computed. This test can be removed if default tables - * are supplied that are valid for the desired precision. - */ - if (cinfo->data_precision > 8) - cinfo->optimize_coding = TRUE; /* By default, use the simpler non-cosited sampling alignment */ cinfo->CCIR601_sampling = FALSE; + /* By default, apply fancy downsampling */ + cinfo->do_fancy_downsampling = TRUE; + /* No input smoothing */ cinfo->smoothing_factor = 0; @@ -338,6 +270,9 @@ jpeg_set_defaults (j_compress_ptr cinfo) * JFIF_minor_version to 2. We could probably get away with just defaulting * to 1.02, but there may still be some decoders in use that will complain * about that; saying 1.01 should minimize compatibility problems. + * + * For wide gamut colorspaces (BG_RGB and BG_YCC), the major version will be + * overridden by jpeg_set_colorspace and set to 2. */ cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ cinfo->JFIF_minor_version = 1; @@ -345,6 +280,9 @@ jpeg_set_defaults (j_compress_ptr cinfo) cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ cinfo->Y_density = 1; + /* No color transform */ + cinfo->color_transform = JCT_NONE; + /* Choose JPEG colorspace based on input space, set defaults accordingly */ jpeg_default_colorspace(cinfo); @@ -359,6 +297,9 @@ GLOBAL(void) jpeg_default_colorspace (j_compress_ptr cinfo) { switch (cinfo->in_color_space) { + case JCS_UNKNOWN: + jpeg_set_colorspace(cinfo, JCS_UNKNOWN); + break; case JCS_GRAYSCALE: jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); break; @@ -374,8 +315,12 @@ jpeg_default_colorspace (j_compress_ptr cinfo) case JCS_YCCK: jpeg_set_colorspace(cinfo, JCS_YCCK); break; - case JCS_UNKNOWN: - jpeg_set_colorspace(cinfo, JCS_UNKNOWN); + case JCS_BG_RGB: + /* No translation for now -- conversion to BG_YCC not yet supportet */ + jpeg_set_colorspace(cinfo, JCS_BG_RGB); + break; + case JCS_BG_YCC: + jpeg_set_colorspace(cinfo, JCS_BG_YCC); break; default: ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); @@ -416,27 +361,40 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ switch (colorspace) { + case JCS_UNKNOWN: + cinfo->num_components = cinfo->input_components; + if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + for (ci = 0; ci < cinfo->num_components; ci++) { + SET_COMP(ci, ci, 1,1, 0, 0,0); + } + break; case JCS_GRAYSCALE: cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ cinfo->num_components = 1; /* JFIF specifies component ID 1 */ - SET_COMP(0, 1, 1,1, 0, 0,0); + SET_COMP(0, 0x01, 1,1, 0, 0,0); break; case JCS_RGB: cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ cinfo->num_components = 3; - SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); + SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); - SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); + SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); break; case JCS_YCbCr: cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ cinfo->num_components = 3; /* JFIF specifies component IDs 1,2,3 */ /* We default to 2x2 subsamples of chrominance */ - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); + SET_COMP(0, 0x01, 2,2, 0, 0,0); + SET_COMP(1, 0x02, 1,1, 1, 1,1); + SET_COMP(2, 0x03, 1,1, 1, 1,1); break; case JCS_CMYK: cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ @@ -449,19 +407,33 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) case JCS_YCCK: cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ cinfo->num_components = 4; - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - SET_COMP(3, 4, 2,2, 0, 0,0); + SET_COMP(0, 0x01, 2,2, 0, 0,0); + SET_COMP(1, 0x02, 1,1, 1, 1,1); + SET_COMP(2, 0x03, 1,1, 1, 1,1); + SET_COMP(3, 0x04, 2,2, 0, 0,0); break; - case JCS_UNKNOWN: - cinfo->num_components = cinfo->input_components; - if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - for (ci = 0; ci < cinfo->num_components; ci++) { - SET_COMP(ci, ci, 1,1, 0, 0,0); - } + case JCS_BG_RGB: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->JFIF_major_version = 2; /* Set JFIF major version = 2 */ + cinfo->num_components = 3; + /* Add offset 0x20 to the normal R/G/B component IDs */ + SET_COMP(0, 0x72 /* 'r' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + SET_COMP(1, 0x67 /* 'g' */, 1,1, 0, 0,0); + SET_COMP(2, 0x62 /* 'b' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + break; + case JCS_BG_YCC: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->JFIF_major_version = 2; /* Set JFIF major version = 2 */ + cinfo->num_components = 3; + /* Add offset 0x20 to the normal Cb/Cr component IDs */ + /* We default to 2x2 subsamples of chrominance */ + SET_COMP(0, 0x01, 2,2, 0, 0,0); + SET_COMP(1, 0x22, 1,1, 1, 1,1); + SET_COMP(2, 0x23, 1,1, 1, 1,1); break; default: ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); @@ -545,8 +517,10 @@ jpeg_simple_progression (j_compress_ptr cinfo) ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); /* Figure space needed for script. Calculation must match code below! */ - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ + if (ncomps == 3 && + (cinfo->jpeg_color_space == JCS_YCbCr || + cinfo->jpeg_color_space == JCS_BG_YCC)) { + /* Custom script for YCC color images. */ nscans = 10; } else { /* All-purpose script for other color spaces. */ @@ -561,7 +535,7 @@ jpeg_simple_progression (j_compress_ptr cinfo) * multiple compressions without changing the settings. To avoid a memory * leak if jpeg_simple_progression is called repeatedly for the same JPEG * object, we try to re-use previously allocated space, and we allocate - * enough space to handle YCbCr even if initially asked for grayscale. + * enough space to handle YCC even if initially asked for grayscale. */ if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { cinfo->script_space_size = MAX(nscans, 10); @@ -573,8 +547,10 @@ jpeg_simple_progression (j_compress_ptr cinfo) cinfo->scan_info = scanptr; cinfo->num_scans = nscans; - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ + if (ncomps == 3 && + (cinfo->jpeg_color_space == JCS_YCbCr || + cinfo->jpeg_color_space == JCS_BG_YCC)) { + /* Custom script for YCC color images. */ /* Initial DC scan */ scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); /* Initial AC scan: get some luma data out in a hurry */ diff --git a/Jpeg/jcprepct.c b/jpeg-9d/jcprepct.c similarity index 95% rename from Jpeg/jcprepct.c rename to jpeg-9d/jcprepct.c index d106242..be44cc4 100644 --- a/Jpeg/jcprepct.c +++ b/jpeg-9d/jcprepct.c @@ -173,10 +173,12 @@ pre_process_data (j_compress_ptr cinfo, *out_row_group_ctr < out_row_groups_avail) { for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { + numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; expand_bottom_edge(output_buf[ci], - compptr->width_in_blocks * DCTSIZE, - (int) (*out_row_group_ctr * compptr->v_samp_factor), - (int) (out_row_groups_avail * compptr->v_samp_factor)); + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (int) (*out_row_group_ctr * numrows), + (int) (out_row_groups_avail * numrows)); } *out_row_group_ctr = out_row_groups_avail; break; /* can exit outer loop without test */ @@ -288,7 +290,8 @@ create_context_buffer (j_compress_ptr cinfo) */ true_buffer = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * cinfo->max_h_samp_factor) / compptr->h_samp_factor), (JDIMENSION) (3 * rgroup_height)); /* Copy true buffer row pointers into the middle of the fake row array */ @@ -312,7 +315,7 @@ create_context_buffer (j_compress_ptr cinfo) */ GLOBAL(void) -jinit_c_prep_controller (j_compress_ptr cinfo, wxjpeg_boolean need_full_buffer) +jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) { my_prep_ptr prep; int ci; @@ -346,7 +349,8 @@ jinit_c_prep_controller (j_compress_ptr cinfo, wxjpeg_boolean need_full_buffer) ci++, compptr++) { prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * cinfo->max_h_samp_factor) / compptr->h_samp_factor), (JDIMENSION) cinfo->max_v_samp_factor); } diff --git a/Jpeg/jcsample.c b/jpeg-9d/jcsample.c similarity index 84% rename from Jpeg/jcsample.c rename to jpeg-9d/jcsample.c index 5cc2999..4d36f85 100644 --- a/Jpeg/jcsample.c +++ b/jpeg-9d/jcsample.c @@ -62,6 +62,15 @@ typedef struct { /* Downsampling method pointers, one per component */ downsample1_ptr methods[MAX_COMPONENTS]; + + /* Height of an output row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_downsample need not + * recompute them each time. They are unused for other downsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; } my_downsampler; typedef my_downsampler * my_downsample_ptr; @@ -123,7 +132,8 @@ sep_downsample (j_compress_ptr cinfo, for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { in_ptr = input_buf[ci] + in_row_index; - out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor); + out_ptr = output_buf[ci] + + (out_row_group_index * downsample->rowgroup_height[ci]); (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); } } @@ -140,14 +150,15 @@ METHODDEF(void) int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, JSAMPARRAY input_data, JSAMPARRAY output_data) { + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; JSAMPROW inptr, outptr; - JPEG_INT32 outvalue; + INT32 outvalue; - h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor; - v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor; + h_expand = downsample->h_expand[compptr->component_index]; + v_expand = downsample->v_expand[compptr->component_index]; numpix = h_expand * v_expand; numpix2 = numpix/2; @@ -158,8 +169,8 @@ int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, expand_right_edge(input_data, cinfo->max_v_samp_factor, cinfo->image_width, output_cols * h_expand); - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { outptr = output_data[outrow]; for (outcol = 0, outcol_h = 0; outcol < output_cols; outcol++, outcol_h += h_expand) { @@ -167,12 +178,13 @@ int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, for (v = 0; v < v_expand; v++) { inptr = input_data[inrow+v] + outcol_h; for (h = 0; h < h_expand; h++) { - outvalue += (JPEG_INT32) GETJSAMPLE(*inptr++); + outvalue += (INT32) GETJSAMPLE(*inptr++); } } *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); } inrow += v_expand; + outrow++; } } @@ -191,8 +203,8 @@ fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, jcopy_sample_rows(input_data, 0, output_data, 0, cinfo->max_v_samp_factor, cinfo->image_width); /* Edge-expand */ - expand_right_edge(output_data, cinfo->max_v_samp_factor, - cinfo->image_width, compptr->width_in_blocks * DCTSIZE); + expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width, + compptr->width_in_blocks * compptr->DCT_h_scaled_size); } @@ -212,9 +224,9 @@ METHODDEF(void) h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, JSAMPARRAY input_data, JSAMPARRAY output_data) { - int outrow; + int inrow; JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; register JSAMPROW inptr, outptr; register int bias; @@ -225,9 +237,9 @@ h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, expand_right_edge(input_data, cinfo->max_v_samp_factor, cinfo->image_width, output_cols * 2); - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr = input_data[outrow]; + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; bias = 0; /* bias = 0,1,0,1,... for successive samples */ for (outcol = 0; outcol < output_cols; outcol++) { *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) @@ -251,7 +263,7 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, { int inrow, outrow; JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; register JSAMPROW inptr0, inptr1, outptr; register int bias; @@ -262,8 +274,8 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, expand_right_edge(input_data, cinfo->max_v_samp_factor, cinfo->image_width, output_cols * 2); - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { outptr = output_data[outrow]; inptr0 = input_data[inrow]; inptr1 = input_data[inrow+1]; @@ -276,6 +288,7 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, inptr0 += 2; inptr1 += 2; } inrow += 2; + outrow++; } } @@ -294,9 +307,9 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, { int inrow, outrow; JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; - JPEG_INT32 membersum, neighsum, memberscale, neighscale; + INT32 membersum, neighsum, memberscale, neighscale; /* Expand input data enough to let all the output samples be generated * by the standard loop. Special-casing padded output would be more @@ -321,8 +334,8 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { outptr = output_data[outrow]; inptr0 = input_data[inrow]; inptr1 = input_data[inrow+1]; @@ -378,6 +391,7 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, *outptr = (JSAMPLE) ((membersum + 32768) >> 16); inrow += 2; + outrow++; } } @@ -392,11 +406,11 @@ METHODDEF(void) fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, JSAMPARRAY input_data, JSAMPARRAY output_data) { - int outrow; + int inrow; JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; register JSAMPROW inptr, above_ptr, below_ptr, outptr; - JPEG_INT32 membersum, neighsum, memberscale, neighscale; + INT32 membersum, neighsum, memberscale, neighscale; int colsum, lastcolsum, nextcolsum; /* Expand input data enough to let all the output samples be generated @@ -415,11 +429,11 @@ fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr = input_data[outrow]; - above_ptr = input_data[outrow-1]; - below_ptr = input_data[outrow+1]; + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+1]; /* Special case for first column */ colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + @@ -466,7 +480,8 @@ jinit_downsampler (j_compress_ptr cinfo) my_downsample_ptr downsample; int ci; jpeg_component_info * compptr; - wxjpeg_boolean smoothok = TRUE; + boolean smoothok = TRUE; + int h_in_group, v_in_group, h_out_group, v_out_group; downsample = (my_downsample_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, @@ -482,8 +497,17 @@ jinit_downsampler (j_compress_ptr cinfo) /* Verify we can handle the sampling factors, and set up method pointers */ for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - if (compptr->h_samp_factor == cinfo->max_h_samp_factor && - compptr->v_samp_factor == cinfo->max_v_samp_factor) { + /* Compute size of an "output group" for DCT scaling. This many samples + * are to be converted from max_h_samp_factor * max_v_samp_factor pixels. + */ + h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_in_group = cinfo->max_h_samp_factor; + v_in_group = cinfo->max_v_samp_factor; + downsample->rowgroup_height[ci] = v_out_group; /* save for use later */ + if (h_in_group == h_out_group && v_in_group == v_out_group) { #ifdef INPUT_SMOOTHING_SUPPORTED if (cinfo->smoothing_factor) { downsample->methods[ci] = fullsize_smooth_downsample; @@ -491,12 +515,12 @@ jinit_downsampler (j_compress_ptr cinfo) } else #endif downsample->methods[ci] = fullsize_downsample; - } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && - compptr->v_samp_factor == cinfo->max_v_samp_factor) { + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group) { smoothok = FALSE; downsample->methods[ci] = h2v1_downsample; - } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && - compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) { + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group * 2) { #ifdef INPUT_SMOOTHING_SUPPORTED if (cinfo->smoothing_factor) { downsample->methods[ci] = h2v2_smooth_downsample; @@ -504,10 +528,12 @@ jinit_downsampler (j_compress_ptr cinfo) } else #endif downsample->methods[ci] = h2v2_downsample; - } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 && - (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) { + } else if ((h_in_group % h_out_group) == 0 && + (v_in_group % v_out_group) == 0) { smoothok = FALSE; downsample->methods[ci] = int_downsample; + downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group); + downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group); } else ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); } diff --git a/Jpeg/jctrans.c b/jpeg-9d/jctrans.c similarity index 90% rename from Jpeg/jctrans.c rename to jpeg-9d/jctrans.c index c5bb27f..5780de4 100644 --- a/Jpeg/jctrans.c +++ b/jpeg-9d/jctrans.c @@ -2,6 +2,7 @@ * jctrans.c * * Copyright (C) 1995-1998, Thomas G. Lane. + * Modified 2000-2017 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -21,12 +22,6 @@ LOCAL(void) transencode_master_selection LOCAL(void) transencode_coef_controller JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); -#if defined(__VISAGECPP__) -/* Visual Age fixups for multiple declarations */ -# define start_pass_coef start_pass_coef2 /* already in jccoeft.c */ -# define compress_output compress_output2 /* already in jccoeft.c */ -#endif - /* * Compression initialization for writing raw-coefficient data. @@ -82,13 +77,23 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, dstinfo->image_height = srcinfo->image_height; dstinfo->input_components = srcinfo->num_components; dstinfo->in_color_space = srcinfo->jpeg_color_space; + dstinfo->jpeg_width = srcinfo->output_width; + dstinfo->jpeg_height = srcinfo->output_height; + dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size; /* Initialize all parameters to default values */ jpeg_set_defaults(dstinfo); /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. * Fix it to get the right header markers for the image colorspace. + * Note: Entropy table assignment in jpeg_set_colorspace + * depends on color_transform. + * Adaption is also required for setting the appropriate + * entropy coding mode dependent on image data precision. */ + dstinfo->color_transform = srcinfo->color_transform; jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); dstinfo->data_precision = srcinfo->data_precision; + dstinfo->arith_code = srcinfo->data_precision > 8 ? TRUE : FALSE; dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; /* Copy the source's quantization tables. */ for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { @@ -131,7 +136,7 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); } } - /* Note: we do not copy the source's Huffman table assignments; + /* Note: we do not copy the source's entropy table assignments; * instead we rely on jpeg_set_colorspace to have made a suitable choice. */ } @@ -141,10 +146,10 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, * if the application chooses to copy JFIF 1.02 extension markers from * the source file, we need to copy the version to make sure we don't * emit a file that has 1.02 extensions but a claimed version of 1.01. - * We will *not*, however, copy version info from mislabeled "2.01" files. */ if (srcinfo->saw_JFIF_marker) { - if (srcinfo->JFIF_major_version == 1) { + if (srcinfo->JFIF_major_version == 1 || + srcinfo->JFIF_major_version == 2) { dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; } @@ -155,6 +160,18 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, } +LOCAL(void) +jpeg_calc_trans_dimensions (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ + if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size); + + cinfo->block_size = cinfo->min_DCT_h_scaled_size; +} + + /* * Master selection of compression modules for transcoding. * This substitutes for jcinit.c's initialization of the full compressor. @@ -164,25 +181,17 @@ LOCAL(void) transencode_master_selection (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) { - /* Although we don't actually use input_components for transcoding, - * jcmaster.c's initial_setup will complain if input_components is 0. - */ - cinfo->input_components = 1; + /* Do computations that are needed before master selection phase */ + jpeg_calc_trans_dimensions(cinfo); + /* Initialize master control (includes parameter checking/processing) */ jinit_c_master_control(cinfo, TRUE /* transcode only */); /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - jinit_phuff_encoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_encoder(cinfo); + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); } /* We need a special coefficient buffer controller. */ @@ -252,6 +261,7 @@ start_iMCU_row (j_compress_ptr cinfo) coef->MCU_vert_offset = 0; } + /* * Initialize for a processing pass. */ @@ -279,7 +289,7 @@ start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) * NB: input_buf is ignored; it is likely to be a NULL pointer. */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) { my_coef_ptr coef = (my_coef_ptr) cinfo->coef; @@ -375,7 +385,7 @@ transencode_coef_controller (j_compress_ptr cinfo, coef = (my_coef_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; + cinfo->coef = &coef->pub; coef->pub.start_pass = start_pass_coef; coef->pub.compress_data = compress_output; @@ -386,17 +396,8 @@ transencode_coef_controller (j_compress_ptr cinfo, buffer = (JBLOCKROW) (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { coef->dummy_buffer[i] = buffer + i; } } - -#if defined(__VISAGECPP__) -# ifdef start_pass_coef2 -# undef start_pass_coef2 -# endif -# ifdef compress_output2 -# undef compress_output2 -# endif -#endif diff --git a/Jpeg/jdapimin.c b/jpeg-9d/jdapimin.c similarity index 89% rename from Jpeg/jdapimin.c rename to jpeg-9d/jdapimin.c index 5c8474f..a6e0dd9 100644 --- a/Jpeg/jdapimin.c +++ b/jpeg-9d/jdapimin.c @@ -2,6 +2,7 @@ * jdapimin.c * * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2009-2013 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -113,8 +114,9 @@ jpeg_abort_decompress (j_decompress_ptr cinfo) LOCAL(void) default_decompress_parms (j_decompress_ptr cinfo) { + int cid0, cid1, cid2; + /* Guess the input colorspace, and set output colorspace accordingly. */ - /* (Wish JPEG committee had provided a real way to specify this...) */ /* Note application may override our guesses. */ switch (cinfo->num_components) { case 1: @@ -123,9 +125,22 @@ default_decompress_parms (j_decompress_ptr cinfo) break; case 3: - if (cinfo->saw_JFIF_marker) { - cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ - } else if (cinfo->saw_Adobe_marker) { + cid0 = cinfo->comp_info[0].component_id; + cid1 = cinfo->comp_info[1].component_id; + cid2 = cinfo->comp_info[2].component_id; + + /* First try to guess from the component IDs */ + if (cid0 == 0x01 && cid1 == 0x02 && cid2 == 0x03) + cinfo->jpeg_color_space = JCS_YCbCr; + else if (cid0 == 0x01 && cid1 == 0x22 && cid2 == 0x23) + cinfo->jpeg_color_space = JCS_BG_YCC; + else if (cid0 == 0x52 && cid1 == 0x47 && cid2 == 0x42) + cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ + else if (cid0 == 0x72 && cid1 == 0x67 && cid2 == 0x62) + cinfo->jpeg_color_space = JCS_BG_RGB; /* ASCII 'r', 'g', 'b' */ + else if (cinfo->saw_JFIF_marker) + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + else if (cinfo->saw_Adobe_marker) { switch (cinfo->Adobe_transform) { case 0: cinfo->jpeg_color_space = JCS_RGB; @@ -135,23 +150,12 @@ default_decompress_parms (j_decompress_ptr cinfo) break; default: WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ break; } } else { - /* Saw no special markers, try to guess from the component IDs */ - int cid0 = cinfo->comp_info[0].component_id; - int cid1 = cinfo->comp_info[1].component_id; - int cid2 = cinfo->comp_info[2].component_id; - - if (cid0 == 1 && cid1 == 2 && cid2 == 3) - cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ - else if (cid0 == 82 && cid1 == 71 && cid2 == 66) - cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ - else { - TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - } + TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ } /* Always guess RGB is proper output colorspace. */ cinfo->out_color_space = JCS_RGB; @@ -168,7 +172,7 @@ default_decompress_parms (j_decompress_ptr cinfo) break; default: WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ + cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ break; } } else { @@ -185,8 +189,8 @@ default_decompress_parms (j_decompress_ptr cinfo) } /* Set defaults for other decompression parameters. */ - cinfo->scale_num = 1; /* 1:1 scaling */ - cinfo->scale_denom = 1; + cinfo->scale_num = cinfo->block_size; /* 1:1 scaling */ + cinfo->scale_denom = cinfo->block_size; cinfo->output_gamma = 1.0; cinfo->buffered_image = FALSE; cinfo->raw_data_out = FALSE; @@ -238,7 +242,7 @@ default_decompress_parms (j_decompress_ptr cinfo) */ GLOBAL(int) -jpeg_read_header (j_decompress_ptr cinfo, wxjpeg_boolean require_image) +jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) { int retcode; @@ -330,7 +334,7 @@ jpeg_consume_input (j_decompress_ptr cinfo) * Have we finished reading the input file? */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_input_complete (j_decompress_ptr cinfo) { /* Check for valid jpeg object */ @@ -345,7 +349,7 @@ jpeg_input_complete (j_decompress_ptr cinfo) * Is there more than one scan? */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_has_multiple_scans (j_decompress_ptr cinfo) { /* Only valid after jpeg_read_header completes */ @@ -365,7 +369,7 @@ jpeg_has_multiple_scans (j_decompress_ptr cinfo) * a suspending data source is used. */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_finish_decompress (j_decompress_ptr cinfo) { if ((cinfo->global_state == DSTATE_SCANNING || diff --git a/Jpeg/jdapistd.c b/jpeg-9d/jdapistd.c similarity index 98% rename from Jpeg/jdapistd.c rename to jpeg-9d/jdapistd.c index 9c995b4..7f3a78b 100644 --- a/Jpeg/jdapistd.c +++ b/jpeg-9d/jdapistd.c @@ -2,6 +2,7 @@ * jdapistd.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2013 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -20,7 +21,7 @@ /* Forward declarations */ -LOCAL(wxjpeg_boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); +LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); /* @@ -34,7 +35,7 @@ LOCAL(wxjpeg_boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); * a suspending data source is used. */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_start_decompress (j_decompress_ptr cinfo) { if (cinfo->global_state == DSTATE_READY) { @@ -91,7 +92,7 @@ jpeg_start_decompress (j_decompress_ptr cinfo) * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. */ -LOCAL(wxjpeg_boolean) +LOCAL(boolean) output_pass_setup (j_decompress_ptr cinfo) { if (cinfo->global_state != DSTATE_PRESCAN) { @@ -202,7 +203,7 @@ jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, } /* Verify that at least one iMCU row can be returned. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size; + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; if (max_lines < lines_per_iMCU_row) ERREXIT(cinfo, JERR_BUFFER_SIZE); @@ -224,7 +225,7 @@ jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, * Initialize for an output pass in buffered-image mode. */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_start_output (j_decompress_ptr cinfo, int scan_number) { if (cinfo->global_state != DSTATE_BUFIMAGE && @@ -249,7 +250,7 @@ jpeg_start_output (j_decompress_ptr cinfo, int scan_number) * a suspending data source is used. */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_finish_output (j_decompress_ptr cinfo) { if ((cinfo->global_state == DSTATE_SCANNING || diff --git a/jpeg-9d/jdarith.c b/jpeg-9d/jdarith.c new file mode 100644 index 0000000..9e4dfdf --- /dev/null +++ b/jpeg-9d/jdarith.c @@ -0,0 +1,796 @@ +/* + * jdarith.c + * + * Developed 1997-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy decoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy decoder object for arithmetic decoding. */ + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval + input bit buffer */ + INT32 a; /* A register, normalized size of coding interval */ + int ct; /* bit shift counter, # of bits left in bit buffer part of C */ + /* init: ct = -16 */ + /* run: ct = 0..7 */ + /* error: ct = -1 */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_decoder; + +typedef arith_entropy_decoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + + +LOCAL(int) +get_byte (j_decompress_ptr cinfo) +/* Read next input byte; we do not support suspension in this module. */ +{ + struct jpeg_source_mgr * src = cinfo->src; + + if (src->bytes_in_buffer == 0) + if (! (*src->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + src->bytes_in_buffer--; + return GETJOCTET(*src->next_input_byte++); +} + + +/* + * The core arithmetic decoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Return value is 0 or 1 (binary decision). + * + * Note: I've changed the handling of the code base & bit + * buffer register C compared to other implementations + * based on the standards layout & procedures. + * While it also contains both the actual base of the + * coding interval (16 bits) and the next-bits buffer, + * the cut-point between these two parts is floating + * (instead of fixed) with the bit shift counter CT. + * Thus, we also need only one (variable instead of + * fixed size) shift for the LPS/MPS decision, and + * we can do away with any renormalization update + * of C (except for new data insertion, of course). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(int) +arith_decode (j_decompress_ptr cinfo, unsigned char *st) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv, data; + + /* Renormalization & data input per section D.2.6 */ + while (e->a < 0x8000L) { + if (--e->ct < 0) { + /* Need to fetch next data byte */ + if (cinfo->unread_marker) + data = 0; /* stuff zero data */ + else { + data = get_byte(cinfo); /* read next input byte */ + if (data == 0xFF) { /* zero stuff or marker code */ + do data = get_byte(cinfo); + while (data == 0xFF); /* swallow extra 0xFF bytes */ + if (data == 0) + data = 0xFF; /* discard stuffed zero byte */ + else { + /* Note: Different from the Huffman decoder, hitting + * a marker while processing the compressed data + * segment is legal in arithmetic coding. + * The convention is to supply zero data + * then until decoding is complete. + */ + cinfo->unread_marker = data; + data = 0; + } + } + } + e->c = (e->c << 8) | data; /* insert data into C register */ + if ((e->ct += 8) < 0) /* update bit shift counter */ + /* Need more initial bytes */ + if (++e->ct == 0) + /* Got 2 initial bytes -> re-init A and exit loop */ + e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */ + } + e->a <<= 1; + } + + /* Fetch values from our compact representation of Table D.3(D.2): + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Decode & estimation procedures per sections D.2.4 & D.2.5 */ + temp = e->a - qe; + e->a = temp; + temp <<= e->ct; + if (e->c >= temp) { + e->c -= temp; + /* Conditional LPS (less probable symbol) exchange */ + if (e->a < qe) { + e->a = qe; + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } else { + e->a = qe; + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } + } else if (e->a < 0x8000L) { + /* Conditional MPS (more probable symbol) exchange */ + if (e->a < qe) { + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } else { + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + } + + return sv >> 7; +} + + +/* + * Check for a restart marker & resynchronize decoder. + */ + +LOCAL(void) +process_restart (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Arithmetic MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * arithmetic-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign; + int v, m; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == (int) 0x8000U) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al); + } + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + /* Figure F.20: Decode_AC_coefficients */ + k = cinfo->Ss - 1; + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + k++; + if (arith_decode(cinfo, st + 1)) break; + st += 3; + if (k >= cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == (int) 0x8000U) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al); + } while (k < cinfo->Se); + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + JCOEF p1; + int blkn; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* Encoded data is simply the next bit of the two's-complement DC value */ + if (arith_decode(cinfo, st)) + MCU_data[blkn][0][0] |= p1; + } + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + JCOEFPTR thiscoef; + unsigned char *st; + int tbl, k, kex; + JCOEF p1, m1; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = -p1; /* -1 in the bit position being coded */ + + /* Establish EOBx (previous stage end-of-block) index */ + kex = cinfo->Se; + do { + if ((*block)[natural_order[kex]]) break; + } while (--kex); + + k = cinfo->Ss - 1; + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (k >= kex) + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + thiscoef = *block + natural_order[++k]; + if (*thiscoef) { /* previously nonzero coef */ + if (arith_decode(cinfo, st + 2)) { + if (*thiscoef < 0) + *thiscoef += m1; + else + *thiscoef += p1; + } + break; + } + if (arith_decode(cinfo, st + 1)) { /* newly nonzero coef */ + if (arith_decode(cinfo, entropy->fixed_bin)) + *thiscoef = m1; + else + *thiscoef = p1; + break; + } + st += 3; + if (k >= cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + } while (k < cinfo->Se); + + return TRUE; +} + + +/* + * Decode one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + jpeg_component_info * compptr; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == (int) 0x8000U) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + (*block)[0] = (JCOEF) entropy->last_dc_val[ci]; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + if (cinfo->lim_Se == 0) continue; + tbl = compptr->ac_tbl_no; + k = 0; + + /* Figure F.20: Decode_AC_coefficients */ + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + k++; + if (arith_decode(cinfo, st + 1)) break; + st += 3; + if (k >= cinfo->lim_Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == (int) 0x8000U) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + (*block)[natural_order[k]] = (JCOEF) v; + } while (k < cinfo->lim_Se); + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + (cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + /* Select MCU decoding routine */ + entropy->pub.decode_mcu = decode_mcu; + } + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); + } + } + + /* Initialize arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Finish up at the end of an arithmetic-compressed scan. + */ + +METHODDEF(void) +finish_pass (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Module initialization routine for arithmetic entropy decoding. + */ + +GLOBAL(void) +jinit_arith_decoder (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(arith_entropy_decoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass; + entropy->pub.finish_pass = finish_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * DCTSIZE2 * SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + } +} diff --git a/Jpeg/jdatadst.c b/jpeg-9d/jdatadst.c similarity index 52% rename from Jpeg/jdatadst.c rename to jpeg-9d/jdatadst.c index 053431f..75ebd7c 100644 --- a/Jpeg/jdatadst.c +++ b/jpeg-9d/jdatadst.c @@ -2,13 +2,14 @@ * jdatadst.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains compression data destination routines for the case of - * emitting JPEG data to a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * destination manager. + * emitting JPEG data to memory or to a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different destination manager. * IMPORTANT: we assume that fwrite() will correctly transcribe an array of * JOCTETs into 8-bit-wide elements on external storage. If char is wider * than 8 bits on your machine, you may need to do some tweaking. @@ -19,6 +20,11 @@ #include "jpeglib.h" #include "jerror.h" +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + /* Expanded data destination object for stdio output */ @@ -34,6 +40,21 @@ typedef my_destination_mgr * my_dest_ptr; #define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ +/* Expanded data destination object for memory output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + unsigned char ** outbuffer; /* target buffer */ + size_t * outsize; + unsigned char * newbuffer; /* newly allocated buffer */ + JOCTET * buffer; /* start of buffer */ + size_t bufsize; +} my_mem_destination_mgr; + +typedef my_mem_destination_mgr * my_mem_dest_ptr; + + /* * Initialize destination --- called by jpeg_start_compress * before any data is actually written. @@ -45,14 +66,19 @@ init_destination (j_compress_ptr cinfo) my_dest_ptr dest = (my_dest_ptr) cinfo->dest; /* Allocate the output buffer --- it will be released when done with image */ - dest->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); + dest->buffer = (JOCTET *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); dest->pub.next_output_byte = dest->buffer; dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; } +METHODDEF(void) +init_mem_destination (j_compress_ptr cinfo) +{ + /* no work necessary here */ +} + /* * Empty the output buffer --- called whenever buffer fills up. @@ -77,7 +103,7 @@ init_destination (j_compress_ptr cinfo) * write it out when emptying the buffer externally. */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) empty_output_buffer (j_compress_ptr cinfo) { my_dest_ptr dest = (my_dest_ptr) cinfo->dest; @@ -92,6 +118,36 @@ empty_output_buffer (j_compress_ptr cinfo) return TRUE; } +METHODDEF(boolean) +empty_mem_output_buffer (j_compress_ptr cinfo) +{ + size_t nextsize; + JOCTET * nextbuffer; + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + /* Try to allocate new buffer with double size */ + nextsize = dest->bufsize * 2; + nextbuffer = (JOCTET *) malloc(nextsize); + + if (nextbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 11); + + MEMCOPY(nextbuffer, dest->buffer, dest->bufsize); + + if (dest->newbuffer != NULL) + free(dest->newbuffer); + + dest->newbuffer = nextbuffer; + + dest->pub.next_output_byte = nextbuffer + dest->bufsize; + dest->pub.free_in_buffer = dest->bufsize; + + dest->buffer = nextbuffer; + dest->bufsize = nextsize; + + return TRUE; +} + /* * Terminate destination --- called by jpeg_finish_compress @@ -113,12 +169,21 @@ term_destination (j_compress_ptr cinfo) if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) ERREXIT(cinfo, JERR_FILE_WRITE); } - fflush(dest->outfile); + JFFLUSH(dest->outfile); /* Make sure we wrote the output file OK */ - if (ferror(dest->outfile)) + if (JFERROR(dest->outfile)) ERREXIT(cinfo, JERR_FILE_WRITE); } +METHODDEF(void) +term_mem_destination (j_compress_ptr cinfo) +{ + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + *dest->outbuffer = dest->buffer; + *dest->outsize = dest->bufsize - dest->pub.free_in_buffer; +} + /* * Prepare for output to a stdio stream. @@ -138,9 +203,8 @@ jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) * sizes may be different. Caveat programmer. */ if (cinfo->dest == NULL) { /* first time for this JPEG object? */ - cinfo->dest = (struct jpeg_destination_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_destination_mgr)); + cinfo->dest = (struct jpeg_destination_mgr *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_PERMANENT, SIZEOF(my_destination_mgr)); } dest = (my_dest_ptr) cinfo->dest; @@ -149,3 +213,55 @@ jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) dest->pub.term_destination = term_destination; dest->outfile = outfile; } + + +/* + * Prepare for output to a memory buffer. + * The caller may supply an own initial buffer with appropriate size. + * Otherwise, or when the actual data output exceeds the given size, + * the library adapts the buffer size as necessary. + * The standard library functions malloc/free are used for allocating + * larger memory, so the buffer is available to the application after + * finishing compression, and then the application is responsible for + * freeing the requested memory. + * Note: An initial buffer supplied by the caller is expected to be + * managed by the application. The library does not free such buffer + * when allocating a larger buffer. + */ + +GLOBAL(void) +jpeg_mem_dest (j_compress_ptr cinfo, + unsigned char ** outbuffer, size_t * outsize) +{ + my_mem_dest_ptr dest; + + if (outbuffer == NULL || outsize == NULL) /* sanity check */ + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same buffer without re-executing jpeg_mem_dest. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_PERMANENT, SIZEOF(my_mem_destination_mgr)); + } + + dest = (my_mem_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_mem_destination; + dest->pub.empty_output_buffer = empty_mem_output_buffer; + dest->pub.term_destination = term_mem_destination; + dest->outbuffer = outbuffer; + dest->outsize = outsize; + dest->newbuffer = NULL; + + if (*outbuffer == NULL || *outsize == 0) { + /* Allocate initial buffer */ + dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE); + if (dest->newbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + *outsize = OUTPUT_BUF_SIZE; + } + + dest->pub.next_output_byte = dest->buffer = *outbuffer; + dest->pub.free_in_buffer = dest->bufsize = *outsize; +} diff --git a/Jpeg/jdatasrc.c b/jpeg-9d/jdatasrc.c similarity index 72% rename from Jpeg/jdatasrc.c rename to jpeg-9d/jdatasrc.c index 09a4330..606ae11 100644 --- a/Jpeg/jdatasrc.c +++ b/jpeg-9d/jdatasrc.c @@ -2,13 +2,14 @@ * jdatasrc.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains decompression data source routines for the case of - * reading JPEG data from a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * source manager. + * reading JPEG data from memory or from a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different source manager. * IMPORTANT: we assume that fread() will correctly transcribe an array of * JOCTETs from 8-bit-wide elements on external storage. If char is wider * than 8 bits on your machine, you may need to do some tweaking. @@ -27,7 +28,7 @@ typedef struct { FILE * infile; /* source stream */ JOCTET * buffer; /* start of buffer */ - wxjpeg_boolean start_of_file; /* have we gotten any data yet? */ + boolean start_of_file; /* have we gotten any data yet? */ } my_source_mgr; typedef my_source_mgr * my_src_ptr; @@ -52,6 +53,12 @@ init_source (j_decompress_ptr cinfo) src->start_of_file = TRUE; } +METHODDEF(void) +init_mem_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + /* * Fill the input buffer --- called whenever buffer is emptied. @@ -86,7 +93,7 @@ init_source (j_decompress_ptr cinfo) * the front of the buffer rather than discarding it. */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) fill_input_buffer (j_decompress_ptr cinfo) { my_src_ptr src = (my_src_ptr) cinfo->src; @@ -111,6 +118,27 @@ fill_input_buffer (j_decompress_ptr cinfo) return TRUE; } +METHODDEF(boolean) +fill_mem_input_buffer (j_decompress_ptr cinfo) +{ + static const JOCTET mybuffer[4] = { + (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0 + }; + + /* The whole JPEG data is expected to reside in the supplied memory + * buffer, so any request for more data beyond the given buffer size + * is treated as an error. + */ + WARNMS(cinfo, JWRN_JPEG_EOF); + + /* Insert a fake EOI marker */ + + cinfo->src->next_input_byte = mybuffer; + cinfo->src->bytes_in_buffer = 2; + + return TRUE; +} + /* * Skip data --- used to skip over a potentially large amount of @@ -127,22 +155,24 @@ fill_input_buffer (j_decompress_ptr cinfo) METHODDEF(void) skip_input_data (j_decompress_ptr cinfo, long num_bytes) { - my_src_ptr src = (my_src_ptr) cinfo->src; + struct jpeg_source_mgr * src = cinfo->src; + size_t nbytes; /* Just a dumb implementation for now. Could use fseek() except * it doesn't work on pipes. Not clear that being smart is worth * any trouble anyway --- large skips are infrequent. */ if (num_bytes > 0) { - while (num_bytes > (long) src->pub.bytes_in_buffer) { - num_bytes -= (long) src->pub.bytes_in_buffer; - (void) fill_input_buffer(cinfo); + nbytes = (size_t) num_bytes; + while (nbytes > src->bytes_in_buffer) { + nbytes -= src->bytes_in_buffer; + (void) (*src->fill_input_buffer) (cinfo); /* note we assume that fill_input_buffer will never return FALSE, * so suspension need not be handled. */ } - src->pub.next_input_byte += (size_t) num_bytes; - src->pub.bytes_in_buffer -= (size_t) num_bytes; + src->next_input_byte += nbytes; + src->bytes_in_buffer -= nbytes; } } @@ -191,13 +221,11 @@ jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) * manager serially with the same JPEG object. Caveat programmer. */ if (cinfo->src == NULL) { /* first time for this JPEG object? */ - cinfo->src = (struct jpeg_source_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_source_mgr)); + cinfo->src = (struct jpeg_source_mgr *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_PERMANENT, SIZEOF(my_source_mgr)); src = (my_src_ptr) cinfo->src; - src->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - INPUT_BUF_SIZE * SIZEOF(JOCTET)); + src->buffer = (JOCTET *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_PERMANENT, INPUT_BUF_SIZE * SIZEOF(JOCTET)); } src = (my_src_ptr) cinfo->src; @@ -210,3 +238,37 @@ jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ src->pub.next_input_byte = NULL; /* until buffer loaded */ } + + +/* + * Prepare for input from a supplied memory buffer. + * The buffer must contain the whole JPEG data. + */ + +GLOBAL(void) +jpeg_mem_src (j_decompress_ptr cinfo, + const unsigned char * inbuffer, size_t insize) +{ + struct jpeg_source_mgr * src; + + if (inbuffer == NULL || insize == 0) /* Treat empty input as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + + /* The source object is made permanent so that a series of JPEG images + * can be read from the same buffer by calling jpeg_mem_src only before + * the first one. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_PERMANENT, SIZEOF(struct jpeg_source_mgr)); + } + + src = cinfo->src; + src->init_source = init_mem_source; + src->fill_input_buffer = fill_mem_input_buffer; + src->skip_input_data = skip_input_data; + src->resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->term_source = term_source; + src->bytes_in_buffer = insize; + src->next_input_byte = (const JOCTET *) inbuffer; +} diff --git a/Jpeg/jdcoefct.c b/jpeg-9d/jdcoefct.c similarity index 96% rename from Jpeg/jdcoefct.c rename to jpeg-9d/jdcoefct.c index e5c3636..ed02fc3 100644 --- a/Jpeg/jdcoefct.c +++ b/jpeg-9d/jdcoefct.c @@ -2,6 +2,7 @@ * jdcoefct.c * * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2002-2011 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -69,7 +70,7 @@ METHODDEF(int) decompress_data JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); #endif #ifdef BLOCK_SMOOTHING_SUPPORTED -LOCAL(wxjpeg_boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); +LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); METHODDEF(int) decompress_smooth_data JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); #endif @@ -104,16 +105,13 @@ start_iMCU_row (j_decompress_ptr cinfo) */ METHODDEF(void) -#if defined(__VISAGECPP__) -start_input_pass2 (j_decompress_ptr cinfo) -#else start_input_pass (j_decompress_ptr cinfo) -#endif { cinfo->input_iMCU_row = 0; start_iMCU_row(cinfo); } + /* * Initialize for an output processing pass. */ @@ -165,8 +163,9 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; MCU_col_num++) { /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ - jzero_far((void FAR *) coef->MCU_buffer[0], - (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); + if (cinfo->lim_Se) /* can bypass in DC only case */ + FMEMZERO((void FAR *) coef->MCU_buffer[0], + (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { /* Suspension forced; update state counters and exit */ coef->MCU_vert_offset = yoffset; @@ -190,7 +189,7 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width : compptr->last_col_width; output_ptr = output_buf[compptr->component_index] + - yoffset * compptr->DCT_scaled_size; + yoffset * compptr->DCT_v_scaled_size; start_col = MCU_col_num * compptr->MCU_sample_width; for (yindex = 0; yindex < compptr->MCU_height; yindex++) { if (cinfo->input_iMCU_row < last_iMCU_row || @@ -200,11 +199,11 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) coef->MCU_buffer[blkn+xindex], output_ptr, output_col); - output_col += compptr->DCT_scaled_size; + output_col += compptr->DCT_h_scaled_size; } } blkn += compptr->MCU_width; - output_ptr += compptr->DCT_scaled_size; + output_ptr += compptr->DCT_v_scaled_size; } } } @@ -365,9 +364,9 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, output_ptr, output_col); buffer_ptr++; - output_col += compptr->DCT_scaled_size; + output_col += compptr->DCT_h_scaled_size; } - output_ptr += compptr->DCT_scaled_size; + output_ptr += compptr->DCT_v_scaled_size; } } @@ -404,11 +403,11 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) * more accurately than they really are. */ -LOCAL(wxjpeg_boolean) +LOCAL(boolean) smoothing_ok (j_decompress_ptr cinfo) { my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - wxjpeg_boolean smoothing_useful = FALSE; + boolean smoothing_useful = FALSE; int ci, coefi; jpeg_component_info *compptr; JQUANT_TBL * qtable; @@ -473,11 +472,11 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) JDIMENSION output_col; jpeg_component_info *compptr; inverse_DCT_method_ptr inverse_DCT; - wxjpeg_boolean first_row, last_row; + boolean first_row, last_row; JBLOCK workspace; int *coef_bits; JQUANT_TBL *quanttbl; - JPEG_INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; + INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; int Al, pred; @@ -657,9 +656,9 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) DC4 = DC5; DC5 = DC6; DC7 = DC8; DC8 = DC9; buffer_ptr++, prev_block_row++, next_block_row++; - output_col += compptr->DCT_scaled_size; + output_col += compptr->DCT_h_scaled_size; } - output_ptr += compptr->DCT_scaled_size; + output_ptr += compptr->DCT_v_scaled_size; } } @@ -676,7 +675,7 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) */ GLOBAL(void) -jinit_d_coef_controller (j_decompress_ptr cinfo, wxjpeg_boolean need_full_buffer) +jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) { my_coef_ptr coef; @@ -684,12 +683,7 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, wxjpeg_boolean need_full_buffer (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_coef_controller)); cinfo->coef = (struct jpeg_d_coef_controller *) coef; -#if defined(__VISAGECPP__) - coef->pub.start_input_pass2 = start_input_pass2; -#else coef->pub.start_input_pass = start_input_pass; -#endif - coef->pub.start_output_pass = start_output_pass; #ifdef BLOCK_SMOOTHING_SUPPORTED coef->coef_bits_latch = NULL; @@ -737,9 +731,11 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, wxjpeg_boolean need_full_buffer for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { coef->MCU_buffer[i] = buffer + i; } + if (cinfo->lim_Se == 0) /* DC only case: want to bypass later */ + FMEMZERO((void FAR *) buffer, + (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK))); coef->pub.consume_data = dummy_consume_data; coef->pub.decompress_data = decompress_onepass; coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ } } - diff --git a/jpeg-9d/jdcolor.c b/jpeg-9d/jdcolor.c new file mode 100644 index 0000000..3746c2e --- /dev/null +++ b/jpeg-9d/jdcolor.c @@ -0,0 +1,719 @@ +/* + * jdcolor.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2011-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains output colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +#if RANGE_BITS < 2 + /* Deliberate syntax err */ + Sorry, this code requires 2 or more range extension bits. +#endif + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_deconverter pub; /* public fields */ + + /* Private state for YCbCr->RGB and BG_YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* Private state for RGB->Y conversion */ + INT32 * rgb_y_tab; /* => table for RGB to Y conversion */ +} my_color_deconverter; + +typedef my_color_deconverter * my_cconvert_ptr; + + +/*************** YCbCr -> RGB conversion: most common case **************/ +/*************** BG_YCC -> RGB conversion: less common case **************/ +/*************** RGB -> Y conversion: less common case **************/ + +/* + * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011), + * previously known as Recommendation CCIR 601-1, except that Cb and Cr + * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999. + * sYCC (standard luma-chroma-chroma color space with extended gamut) + * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F. + * bg-sRGB and bg-sYCC (big gamut standard color spaces) + * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G. + * Note that the derived conversion coefficients given in some of these + * documents are imprecise. The general conversion equations are + * + * R = Y + K * (1 - Kr) * Cr + * G = Y - K * (Kb * (1 - Kb) * Cb + Kr * (1 - Kr) * Cr) / (1 - Kr - Kb) + * B = Y + K * (1 - Kb) * Cb + * + * Y = Kr * R + (1 - Kr - Kb) * G + Kb * B + * + * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993 + * from the 1953 FCC NTSC primaries and CIE Illuminant C), K = 2 for sYCC, + * the conversion equations to be implemented are therefore + * + * R = Y + 1.402 * Cr + * G = Y - 0.344136286 * Cb - 0.714136286 * Cr + * B = Y + 1.772 * Cb + * + * Y = 0.299 * R + 0.587 * G + 0.114 * B + * + * where Cb and Cr represent the incoming values less CENTERJSAMPLE. + * For bg-sYCC, with K = 4, the equations are + * + * R = Y + 2.804 * Cr + * G = Y - 0.688272572 * Cb - 1.428272572 * Cr + * B = Y + 3.544 * Cb + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * Notice that Y, being an integral input, does not contribute any fraction + * so it need not participate in the rounding. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times Cb and Cr for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 9-bit to 12-bit samples it is still acceptable. It's not very + * reasonable for 16-bit samples, but if you want lossless storage you + * shouldn't be changing colorspace anyway. + * The Cr=>R and Cb=>B values can be rounded to integers in advance; the + * values for the G calculation are left scaled up, since we must add them + * together before rounding. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<Y conversion and divide it up into + * three parts, instead of doing three alloc_small requests. This lets us + * use a single table base address, which can be held in a register in the + * inner loops on many machines (more than can hold all three addresses, + * anyway). + */ + +#define R_Y_OFF 0 /* offset to R => Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define TABLE_SIZE (3*(MAXJSAMPLE+1)) + + +/* + * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +/* Normal case, sYCC */ +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.402 * x */ + cconvert->Cr_r_tab[i] = (int) DESCALE(FIX(1.402) * x, SCALEBITS); + /* Cb=>B value is nearest int to 1.772 * x */ + cconvert->Cb_b_tab[i] = (int) DESCALE(FIX(1.772) * x, SCALEBITS); + /* Cr=>G value is scaled-up -0.714136286 * x */ + cconvert->Cr_g_tab[i] = (- FIX(0.714136286)) * x; + /* Cb=>G value is scaled-up -0.344136286 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF; + } +} + + +LOCAL(void) +build_bg_ycc_rgb_table (j_decompress_ptr cinfo) +/* Wide gamut case, bg-sYCC */ +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 2.804 * x */ + cconvert->Cr_r_tab[i] = (int) DESCALE(FIX(2.804) * x, SCALEBITS); + /* Cb=>B value is nearest int to 3.544 * x */ + cconvert->Cb_b_tab[i] = (int) DESCALE(FIX(3.544) * x, SCALEBITS); + /* Cr=>G value is scaled-up -1.428272572 * x */ + cconvert->Cr_g_tab[i] = (- FIX(1.428272572)) * x; + /* Cb=>G value is scaled-up -0.688272572 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF; + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * + * Note that we change from noninterleaved, one-plane-per-component format + * to interleaved-pixel format. The output buffer is therefore three times + * as wide as the input buffer. + * + * A starting row offset is provided only for the input buffer. The caller + * can easily adjust the passed output_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +ycc_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses, + * for extended gamut (sYCC) and wide gamut (bg-sYCC) encodings. + */ + outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; + outptr[RGB_GREEN] = range_limit[y + + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS))]; + outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than YCC -> RGB ****************/ + + +/* + * Initialize for RGB->grayscale colorspace conversion. + */ + +LOCAL(void) +build_rgb_y_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_y_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_y_tab = rgb_y_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, TABLE_SIZE * SIZEOF(INT32)); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_y_tab[i+R_Y_OFF] = FIX(0.299) * i; + rgb_y_tab[i+G_Y_OFF] = FIX(0.587) * i; + rgb_y_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF; + } +} + + +/* + * Convert RGB to grayscale. + */ + +METHODDEF(void) +rgb_gray_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_y_tab; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * [R-G,G,B-G] to [R,G,B] conversion with modulo calculation + * (inverse color transform). + * This can be seen as an adaption of the general YCbCr->RGB + * conversion equation with Kr = Kb = 0, while replacing the + * normalization by modulo calculation. + */ + +METHODDEF(void) +rgb1_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + outptr[RGB_RED] = (JSAMPLE) ((r + g - CENTERJSAMPLE) & MAXJSAMPLE); + outptr[RGB_GREEN] = (JSAMPLE) g; + outptr[RGB_BLUE] = (JSAMPLE) ((b + g - CENTERJSAMPLE) & MAXJSAMPLE); + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * [R-G,G,B-G] to grayscale conversion with modulo calculation + * (inverse color transform). + */ + +METHODDEF(void) +rgb1_gray_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_y_tab; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + r = (r + g - CENTERJSAMPLE) & MAXJSAMPLE; + b = (b + g - CENTERJSAMPLE) & MAXJSAMPLE; + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * No colorspace change, but conversion from separate-planes + * to interleaved representation. + */ + +METHODDEF(void) +rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = inptr0[col]; + outptr[RGB_GREEN] = inptr1[col]; + outptr[RGB_BLUE] = inptr2[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Color conversion for no colorspace change: just copy the data, + * converting from separate-planes to interleaved representation. + * We assume out_color_components == num_components. + */ + +METHODDEF(void) +null_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr; + register JDIMENSION count; + register int num_comps = cinfo->num_components; + JDIMENSION num_cols = cinfo->output_width; + int ci; + + while (--num_rows >= 0) { + /* It seems fastest to make a separate pass for each component. */ + for (ci = 0; ci < num_comps; ci++) { + inptr = input_buf[ci][input_row]; + outptr = output_buf[0] + ci; + for (count = num_cols; count > 0; count--) { + *outptr = *inptr++; /* don't need GETJSAMPLE() here */ + outptr += num_comps; + } + } + input_row++; + output_buf++; + } +} + + +/* + * Color conversion for grayscale: just copy the data. + * This also works for YCC -> grayscale conversion, in which + * we just copy the Y (luminance) component and ignore chrominance. + */ + +METHODDEF(void) +grayscale_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, + num_rows, cinfo->output_width); +} + + +/* + * Convert grayscale to RGB: just duplicate the graylevel three times. + * This is provided to support applications that don't want to cope + * with grayscale as a separate case. + */ + +METHODDEF(void) +gray_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr = input_buf[0][input_row++]; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * This version handles Adobe-style YCCK->CMYK conversion, + * where we convert YCbCr to R=1-C, G=1-M, and B=1-Y using the + * same conversion as above, while passing K (black) unchanged. + * We assume build_ycc_rgb_table has been called. + */ + +METHODDEF(void) +ycck_cmyk_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2, inptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + inptr3 = input_buf[3][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses, + * and for extended gamut encodings (sYCC). + */ + outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ + outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS)))]; + outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ + /* K passes through unchanged */ + outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ + outptr += 4; + } + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +start_pass_dcolor (j_decompress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for output colorspace conversion. + */ + +GLOBAL(void) +jinit_color_deconverter (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + int ci; + + cconvert = (my_cconvert_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_color_deconverter)); + cinfo->cconvert = &cconvert->pub; + cconvert->pub.start_pass = start_pass_dcolor; + + /* Make sure num_components agrees with jpeg_color_space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_RGB: + case JCS_YCbCr: + case JCS_BG_RGB: + case JCS_BG_YCC: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->num_components < 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + } + + /* Support color transform only for RGB colorspaces */ + if (cinfo->color_transform && + cinfo->jpeg_color_space != JCS_RGB && + cinfo->jpeg_color_space != JCS_BG_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + /* Set out_color_components and conversion method based on requested space. + * Also clear the component_needed flags for any unused components, + * so that earlier pipeline stages can avoid useless computation. + */ + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + case JCS_YCbCr: + case JCS_BG_YCC: + cconvert->pub.color_convert = grayscale_convert; + /* For color->grayscale conversion, only the Y (0) component is needed */ + for (ci = 1; ci < cinfo->num_components; ci++) + cinfo->comp_info[ci].component_needed = FALSE; + break; + case JCS_RGB: + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_gray_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_gray_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + build_rgb_y_table(cinfo); + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + cconvert->pub.color_convert = gray_rgb_convert; + break; + case JCS_YCbCr: + cconvert->pub.color_convert = ycc_rgb_convert; + build_ycc_rgb_table(cinfo); + break; + case JCS_BG_YCC: + cconvert->pub.color_convert = ycc_rgb_convert; + build_bg_ycc_rgb_table(cinfo); + break; + case JCS_RGB: + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_rgb_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_BG_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + if (cinfo->jpeg_color_space != JCS_BG_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_rgb_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_CMYK: + cinfo->out_color_components = 4; + switch (cinfo->jpeg_color_space) { + case JCS_YCCK: + cconvert->pub.color_convert = ycck_cmyk_convert; + build_ycc_rgb_table(cinfo); + break; + case JCS_CMYK: + cconvert->pub.color_convert = null_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + default: /* permit null conversion to same output space */ + if (cinfo->out_color_space != cinfo->jpeg_color_space) + /* unsupported non-null conversion */ + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + cinfo->out_color_components = cinfo->num_components; + cconvert->pub.color_convert = null_convert; + } + + if (cinfo->quantize_colors) + cinfo->output_components = 1; /* single colormapped output component */ + else + cinfo->output_components = cinfo->out_color_components; +} diff --git a/jpeg-9d/jdct.h b/jpeg-9d/jdct.h new file mode 100644 index 0000000..c8ec6cd --- /dev/null +++ b/jpeg-9d/jdct.h @@ -0,0 +1,409 @@ +/* + * jdct.h + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file contains common declarations for the forward and + * inverse DCT modules. These declarations are private to the DCT managers + * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. + * The individual DCT algorithms are kept in separate files to ease + * machine-dependent tuning (e.g., assembly coding). + */ + + +/* + * A forward DCT routine is given a pointer to an input sample array and + * a pointer to a work area of type DCTELEM[]; the DCT is to be performed + * in-place in that buffer. Type DCTELEM is int for 8-bit samples, INT32 + * for 12-bit samples. (NOTE: Floating-point DCT implementations use an + * array of type FAST_FLOAT, instead.) + * The input data is to be fetched from the sample array starting at a + * specified column. (Any row offset needed will be applied to the array + * pointer before it is passed to the FDCT code.) + * Note that the number of samples fetched by the FDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + * The DCT outputs are returned scaled up by a factor of 8; they therefore + * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This + * convention improves accuracy in integer implementations and saves some + * work in floating-point ones. + * Quantization of the output coefficients is done by jcdctmgr.c. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef int DCTELEM; /* 16 or 32 bits is fine */ +#else +typedef INT32 DCTELEM; /* must have 32 bits */ +#endif + +typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); +typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); + + +/* + * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer + * to an output sample array. The routine must dequantize the input data as + * well as perform the IDCT; for dequantization, it uses the multiplier table + * pointed to by compptr->dct_table. The output data is to be placed into the + * sample array starting at a specified column. (Any row offset needed will + * be applied to the array pointer before it is passed to the IDCT code.) + * Note that the number of samples emitted by the IDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + */ + +/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ + +/* + * Each IDCT routine has its own ideas about the best dct_table element type. + */ + +typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ +#if BITS_IN_JSAMPLE == 8 +typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ +#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ +#else +typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ +#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ +#endif +typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ + + +/* + * Each IDCT routine is responsible for range-limiting its results and + * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could + * be quite far out of range if the input data is corrupt, so a bulletproof + * range-limiting step is required. We use a mask-and-table-lookup method + * to do the combined operations quickly, assuming that RANGE_CENTER + * (defined in jpegint.h) is a power of 2. See the comments with + * prepare_range_limit_table (in jdmaster.c) for more info. + */ + +#define RANGE_MASK (RANGE_CENTER * 2 - 1) +#define RANGE_SUBSET (RANGE_CENTER - CENTERJSAMPLE) + +#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit - RANGE_SUBSET) + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_fdct_islow jFDislow +#define jpeg_fdct_ifast jFDifast +#define jpeg_fdct_float jFDfloat +#define jpeg_fdct_7x7 jFD7x7 +#define jpeg_fdct_6x6 jFD6x6 +#define jpeg_fdct_5x5 jFD5x5 +#define jpeg_fdct_4x4 jFD4x4 +#define jpeg_fdct_3x3 jFD3x3 +#define jpeg_fdct_2x2 jFD2x2 +#define jpeg_fdct_1x1 jFD1x1 +#define jpeg_fdct_9x9 jFD9x9 +#define jpeg_fdct_10x10 jFD10x10 +#define jpeg_fdct_11x11 jFD11x11 +#define jpeg_fdct_12x12 jFD12x12 +#define jpeg_fdct_13x13 jFD13x13 +#define jpeg_fdct_14x14 jFD14x14 +#define jpeg_fdct_15x15 jFD15x15 +#define jpeg_fdct_16x16 jFD16x16 +#define jpeg_fdct_16x8 jFD16x8 +#define jpeg_fdct_14x7 jFD14x7 +#define jpeg_fdct_12x6 jFD12x6 +#define jpeg_fdct_10x5 jFD10x5 +#define jpeg_fdct_8x4 jFD8x4 +#define jpeg_fdct_6x3 jFD6x3 +#define jpeg_fdct_4x2 jFD4x2 +#define jpeg_fdct_2x1 jFD2x1 +#define jpeg_fdct_8x16 jFD8x16 +#define jpeg_fdct_7x14 jFD7x14 +#define jpeg_fdct_6x12 jFD6x12 +#define jpeg_fdct_5x10 jFD5x10 +#define jpeg_fdct_4x8 jFD4x8 +#define jpeg_fdct_3x6 jFD3x6 +#define jpeg_fdct_2x4 jFD2x4 +#define jpeg_fdct_1x2 jFD1x2 +#define jpeg_idct_islow jRDislow +#define jpeg_idct_ifast jRDifast +#define jpeg_idct_float jRDfloat +#define jpeg_idct_7x7 jRD7x7 +#define jpeg_idct_6x6 jRD6x6 +#define jpeg_idct_5x5 jRD5x5 +#define jpeg_idct_4x4 jRD4x4 +#define jpeg_idct_3x3 jRD3x3 +#define jpeg_idct_2x2 jRD2x2 +#define jpeg_idct_1x1 jRD1x1 +#define jpeg_idct_9x9 jRD9x9 +#define jpeg_idct_10x10 jRD10x10 +#define jpeg_idct_11x11 jRD11x11 +#define jpeg_idct_12x12 jRD12x12 +#define jpeg_idct_13x13 jRD13x13 +#define jpeg_idct_14x14 jRD14x14 +#define jpeg_idct_15x15 jRD15x15 +#define jpeg_idct_16x16 jRD16x16 +#define jpeg_idct_16x8 jRD16x8 +#define jpeg_idct_14x7 jRD14x7 +#define jpeg_idct_12x6 jRD12x6 +#define jpeg_idct_10x5 jRD10x5 +#define jpeg_idct_8x4 jRD8x4 +#define jpeg_idct_6x3 jRD6x3 +#define jpeg_idct_4x2 jRD4x2 +#define jpeg_idct_2x1 jRD2x1 +#define jpeg_idct_8x16 jRD8x16 +#define jpeg_idct_7x14 jRD7x14 +#define jpeg_idct_6x12 jRD6x12 +#define jpeg_idct_5x10 jRD5x10 +#define jpeg_idct_4x8 jRD4x8 +#define jpeg_idct_3x6 jRD3x8 +#define jpeg_idct_2x4 jRD2x4 +#define jpeg_idct_1x2 jRD1x2 +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Extern declarations for the forward and inverse DCT routines. */ + +EXTERN(void) jpeg_fdct_islow + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_ifast + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_float + JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_9x9 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_11x11 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_13x13 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_15x15 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); + +EXTERN(void) jpeg_idct_islow + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_ifast + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_float + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_9x9 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_11x11 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_13x13 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_15x15 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); + + +/* + * Macros for handling fixed-point arithmetic; these are used by many + * but not all of the DCT/IDCT modules. + * + * All values are expected to be of type INT32. + * Fractional constants are scaled left by CONST_BITS bits. + * CONST_BITS is defined within each module using these macros, + * and may differ from one module to the next. + */ + +#define ONE ((INT32) 1) +#define CONST_SCALE (ONE << CONST_BITS) + +/* Convert a positive real constant to an integer scaled by CONST_SCALE. + * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, + * thus causing a lot of useless floating-point operations at run time. + */ + +#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * This macro is used only when the two inputs will actually be no more than + * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a + * full 32x32 multiply. This provides a useful speedup on many machines. + * Unfortunately there is no way to specify a 16x16->32 multiply portably + * in C, but some C compilers will do the right thing if you provide the + * correct combination of casts. + */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) +#endif +#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) +#endif + +#ifndef MULTIPLY16C16 /* default definition */ +#define MULTIPLY16C16(var,const) ((var) * (const)) +#endif + +/* Same except both inputs are variables. */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) +#endif + +#ifndef MULTIPLY16V16 /* default definition */ +#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) +#endif + +/* Like RIGHT_SHIFT, but applies to a DCTELEM. + * We assume that int right shift is unsigned if INT32 right shift is. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS DCTELEM ishift_temp; +#if BITS_IN_JSAMPLE == 8 +#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ +#else +#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ +#endif +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif diff --git a/Jpeg/jddctmgr.c b/jpeg-9d/jddctmgr.c similarity index 62% rename from Jpeg/jddctmgr.c rename to jpeg-9d/jddctmgr.c index e27cc3d..9ecfbb5 100644 --- a/Jpeg/jddctmgr.c +++ b/jpeg-9d/jddctmgr.c @@ -2,6 +2,7 @@ * jddctmgr.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2013 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -98,22 +99,134 @@ start_pass (j_decompress_ptr cinfo) for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { /* Select the proper IDCT routine for this component's scaling */ - switch (compptr->DCT_scaled_size) { + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { #ifdef IDCT_SCALING_SUPPORTED - case 1: + case ((1 << 8) + 1): method_ptr = jpeg_idct_1x1; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ + method = JDCT_ISLOW; /* jidctint uses islow-style table */ break; - case 2: + case ((2 << 8) + 2): method_ptr = jpeg_idct_2x2; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ + method = JDCT_ISLOW; /* jidctint uses islow-style table */ break; - case 4: + case ((3 << 8) + 3): + method_ptr = jpeg_idct_3x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 4): method_ptr = jpeg_idct_4x4; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 5): + method_ptr = jpeg_idct_5x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 6): + method_ptr = jpeg_idct_6x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 7): + method_ptr = jpeg_idct_7x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((9 << 8) + 9): + method_ptr = jpeg_idct_9x9; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 10): + method_ptr = jpeg_idct_10x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((11 << 8) + 11): + method_ptr = jpeg_idct_11x11; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 12): + method_ptr = jpeg_idct_12x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((13 << 8) + 13): + method_ptr = jpeg_idct_13x13; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 14): + method_ptr = jpeg_idct_14x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((15 << 8) + 15): + method_ptr = jpeg_idct_15x15; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 16): + method_ptr = jpeg_idct_16x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 8): + method_ptr = jpeg_idct_16x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 7): + method_ptr = jpeg_idct_14x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 6): + method_ptr = jpeg_idct_12x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 5): + method_ptr = jpeg_idct_10x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 4): + method_ptr = jpeg_idct_8x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 3): + method_ptr = jpeg_idct_6x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 2): + method_ptr = jpeg_idct_4x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 1): + method_ptr = jpeg_idct_2x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 16): + method_ptr = jpeg_idct_8x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 14): + method_ptr = jpeg_idct_7x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 12): + method_ptr = jpeg_idct_6x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 10): + method_ptr = jpeg_idct_5x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 8): + method_ptr = jpeg_idct_4x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 6): + method_ptr = jpeg_idct_3x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 4): + method_ptr = jpeg_idct_2x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((1 << 8) + 2): + method_ptr = jpeg_idct_1x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ break; #endif - case DCTSIZE: + case ((DCTSIZE << 8) + DCTSIZE): switch (cinfo->dct_method) { #ifdef DCT_ISLOW_SUPPORTED case JDCT_ISLOW: @@ -139,7 +252,8 @@ start_pass (j_decompress_ptr cinfo) } break; default: - ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); break; } idct->pub.inverse_DCT[ci] = method_ptr; @@ -197,8 +311,8 @@ start_pass (j_decompress_ptr cinfo) for (i = 0; i < DCTSIZE2; i++) { ifmtbl[i] = (IFAST_MULT_TYPE) - DESCALE(MULTIPLY16V16((JPEG_INT32) qtbl->quantval[i], - (JPEG_INT32) aanscales[i]), + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), CONST_BITS-IFAST_SCALE_BITS); } } @@ -211,6 +325,7 @@ start_pass (j_decompress_ptr cinfo) * coefficients scaled by scalefactor[row]*scalefactor[col], where * scalefactor[0] = 1 * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 1/8. */ FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; int row, col; @@ -224,7 +339,7 @@ start_pass (j_decompress_ptr cinfo) for (col = 0; col < DCTSIZE; col++) { fmtbl[i] = (FLOAT_MULT_TYPE) ((double) qtbl->quantval[i] * - aanscalefactor[row] * aanscalefactor[col]); + aanscalefactor[row] * aanscalefactor[col] * 0.125); i++; } } @@ -253,7 +368,7 @@ jinit_inverse_dct (j_decompress_ptr cinfo) idct = (my_idct_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_idct_controller)); - cinfo->idct = (struct jpeg_inverse_dct *) idct; + cinfo->idct = &idct->pub; idct->pub.start_pass = start_pass; for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; diff --git a/jpeg-9d/jdhuff.c b/jpeg-9d/jdhuff.c new file mode 100644 index 0000000..aea06f6 --- /dev/null +++ b/jpeg-9d/jdhuff.c @@ -0,0 +1,1559 @@ +/* + * jdhuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Derived data constructed for each Huffman table */ + +#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ + +typedef struct { + /* Basic tables: (element [0] of each array is unused) */ + INT32 maxcode[18]; /* largest code of length k (-1 if none) */ + /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ + INT32 valoffset[17]; /* huffval[] offset for codes of length k */ + /* valoffset[k] = huffval[] index of 1st symbol of code length k, less + * the smallest code of length k; so given a code of length k, the + * corresponding symbol is huffval[code + valoffset[k]] + */ + + /* Link to public Huffman table (needed only in jpeg_huff_decode) */ + JHUFF_TBL *pub; + + /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of + * the input data stream. If the next Huffman code is no more + * than HUFF_LOOKAHEAD bits long, we can obtain its length and + * the corresponding symbol directly from these tables. + */ + int look_nbits[1< 32 bits on your machine, and shifting/masking longs is + * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE + * appropriately should be a win. Unfortunately we can't define the size + * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) + * because not all machines measure sizeof in 8-bit bytes. + */ + +typedef struct { /* Bitreading state saved across MCUs */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ +} bitread_perm_state; + +typedef struct { /* Bitreading working state within an MCU */ + /* Current data source location */ + /* We need a copy, rather than munging the original, in case of suspension */ + const JOCTET * next_input_byte; /* => next byte to read from source */ + size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ + /* Bit input buffer --- note these values are kept in register variables, + * not in this struct, inside the inner loops. + */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + /* Pointer needed by jpeg_fill_bit_buffer. */ + j_decompress_ptr cinfo; /* back link to decompress master record */ +} bitread_working_state; + +/* Macros to declare and load/save bitread local variables. */ +#define BITREAD_STATE_VARS \ + register bit_buf_type get_buffer; \ + register int bits_left; \ + bitread_working_state br_state + +#define BITREAD_LOAD_STATE(cinfop,permstate) \ + br_state.cinfo = cinfop; \ + br_state.next_input_byte = cinfop->src->next_input_byte; \ + br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ + get_buffer = permstate.get_buffer; \ + bits_left = permstate.bits_left; + +#define BITREAD_SAVE_STATE(cinfop,permstate) \ + cinfop->src->next_input_byte = br_state.next_input_byte; \ + cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ + permstate.get_buffer = get_buffer; \ + permstate.bits_left = bits_left + +/* + * These macros provide the in-line portion of bit fetching. + * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer + * before using GET_BITS, PEEK_BITS, or DROP_BITS. + * The variables get_buffer and bits_left are assumed to be locals, + * but the state struct might not be (jpeg_huff_decode needs this). + * CHECK_BIT_BUFFER(state,n,action); + * Ensure there are N bits in get_buffer; if suspend, take action. + * val = GET_BITS(n); + * Fetch next N bits. + * val = PEEK_BITS(n); + * Fetch next N bits without removing them from the buffer. + * DROP_BITS(n); + * Discard next N bits. + * The value N should be a simple variable, not an expression, because it + * is evaluated multiple times. + */ + +#define CHECK_BIT_BUFFER(state,nbits,action) \ + { if (bits_left < (nbits)) { \ + if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ + { action; } \ + get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } + +#define GET_BITS(nbits) \ + (((int) (get_buffer >> (bits_left -= (nbits)))) & BIT_MASK(nbits)) + +#define PEEK_BITS(nbits) \ + (((int) (get_buffer >> (bits_left - (nbits)))) & BIT_MASK(nbits)) + +#define DROP_BITS(nbits) \ + (bits_left -= (nbits)) + + +/* + * Code for extracting next Huffman-coded symbol from input bit stream. + * Again, this is time-critical and we make the main paths be macros. + * + * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits + * without looping. Usually, more than 95% of the Huffman codes will be 8 + * or fewer bits long. The few overlength codes are handled with a loop, + * which need not be inline code. + * + * Notes about the HUFF_DECODE macro: + * 1. Near the end of the data segment, we may fail to get enough bits + * for a lookahead. In that case, we do it the hard way. + * 2. If the lookahead table contains no entry, the next code must be + * more than HUFF_LOOKAHEAD bits long. + * 3. jpeg_huff_decode returns -1 if forced to suspend. + */ + +#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ +{ register int nb, look; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + nb = 1; goto slowlabel; \ + } \ + } \ + look = PEEK_BITS(HUFF_LOOKAHEAD); \ + if ((nb = htbl->look_nbits[look]) != 0) { \ + DROP_BITS(nb); \ + result = htbl->look_sym[look]; \ + } else { \ + nb = HUFF_LOOKAHEAD+1; \ +slowlabel: \ + if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ + { failaction; } \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + } \ +} + + +/* + * Expanded entropy decoder object for Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).EOBRUN = (src).EOBRUN, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + boolean insufficient_data; /* set TRUE after emitting warning */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Following two fields used only in progressive mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; + + d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ + + /* Following fields used only in sequential mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Precalculated info set up by start_pass for use in decode_mcu: */ + + /* Pointers to derived tables to be used for each block within an MCU */ + d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + /* Whether we care about the DC and AC coefficient values for each block */ + int coef_limit[D_MAX_BLOCKS_IN_MCU]; +} huff_entropy_decoder; + +typedef huff_entropy_decoder * huff_entropy_ptr; + + +static const int jpeg_zigzag_order[8][8] = { + { 0, 1, 5, 6, 14, 15, 27, 28 }, + { 2, 4, 7, 13, 16, 26, 29, 42 }, + { 3, 8, 12, 17, 25, 30, 41, 43 }, + { 9, 11, 18, 24, 31, 40, 44, 53 }, + { 10, 19, 23, 32, 39, 45, 52, 54 }, + { 20, 22, 33, 38, 46, 51, 55, 60 }, + { 21, 34, 37, 47, 50, 56, 59, 61 }, + { 35, 36, 48, 49, 57, 58, 62, 63 } +}; + +static const int jpeg_zigzag_order7[7][7] = { + { 0, 1, 5, 6, 14, 15, 27 }, + { 2, 4, 7, 13, 16, 26, 28 }, + { 3, 8, 12, 17, 25, 29, 38 }, + { 9, 11, 18, 24, 30, 37, 39 }, + { 10, 19, 23, 31, 36, 40, 45 }, + { 20, 22, 32, 35, 41, 44, 46 }, + { 21, 33, 34, 42, 43, 47, 48 } +}; + +static const int jpeg_zigzag_order6[6][6] = { + { 0, 1, 5, 6, 14, 15 }, + { 2, 4, 7, 13, 16, 25 }, + { 3, 8, 12, 17, 24, 26 }, + { 9, 11, 18, 23, 27, 32 }, + { 10, 19, 22, 28, 31, 33 }, + { 20, 21, 29, 30, 34, 35 } +}; + +static const int jpeg_zigzag_order5[5][5] = { + { 0, 1, 5, 6, 14 }, + { 2, 4, 7, 13, 15 }, + { 3, 8, 12, 16, 21 }, + { 9, 11, 17, 20, 22 }, + { 10, 18, 19, 23, 24 } +}; + +static const int jpeg_zigzag_order4[4][4] = { + { 0, 1, 5, 6 }, + { 2, 4, 7, 12 }, + { 3, 8, 11, 13 }, + { 9, 10, 14, 15 } +}; + +static const int jpeg_zigzag_order3[3][3] = { + { 0, 1, 5 }, + { 2, 4, 6 }, + { 3, 7, 8 } +}; + +static const int jpeg_zigzag_order2[2][2] = { + { 0, 1 }, + { 2, 3 } +}; + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, + d_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + d_derived_tbl *dtbl; + int p, i, l, si, numsymbols; + int lookbits, ctr; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + htbl = jpeg_std_huff_table((j_common_ptr) cinfo, isDC, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (d_derived_tbl *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(d_derived_tbl)); + dtbl = *pdtbl; + dtbl->pub = htbl; /* fill in back link */ + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + numsymbols = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure F.15: generate decoding tables for bit-sequential decoding */ + + p = 0; + for (l = 1; l <= 16; l++) { + if (htbl->bits[l]) { + /* valoffset[l] = huffval[] index of 1st symbol of code length l, + * minus the minimum code of length l + */ + dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; + p += htbl->bits[l]; + dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ + } else { + dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ + } + } + dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ + + /* Compute lookahead tables to speed up decoding. + * First we set all the table entries to 0, indicating "too long"; + * then we iterate through the Huffman codes that are short enough and + * fill in all the entries that correspond to bit sequences starting + * with that code. + */ + + MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); + + p = 0; + for (l = 1; l <= HUFF_LOOKAHEAD; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { + /* l = current code's length, p = its index in huffcode[] & huffval[]. */ + /* Generate left-justified code followed by all possible bit sequences */ + lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); + for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { + dtbl->look_nbits[lookbits] = l; + dtbl->look_sym[lookbits] = htbl->huffval[p]; + lookbits++; + } + } + } + + /* Validate symbols as being reasonable. + * For AC tables, we make no check, but accept all byte values 0..255. + * For DC tables, we require the symbols to be in range 0..15. + * (Tighter bounds could be applied depending on the data depth and mode, + * but this is sufficient to ensure safe decoding.) + */ + if (isDC) { + for (i = 0; i < numsymbols; i++) { + int sym = htbl->huffval[i]; + if (sym < 0 || sym > 15) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + } + } +} + + +/* + * Out-of-line code for bit fetching. + * Note: current values of get_buffer and bits_left are passed as parameters, + * but are returned in the corresponding fields of the state struct. + * + * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width + * of get_buffer to be used. (On machines with wider words, an even larger + * buffer could be used.) However, on some machines 32-bit shifts are + * quite slow and take time proportional to the number of places shifted. + * (This is true with most PC compilers, for instance.) In this case it may + * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the + * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. + */ + +#ifdef SLOW_SHIFT_32 +#define MIN_GET_BITS 15 /* minimum allowable value */ +#else +#define MIN_GET_BITS (BIT_BUF_SIZE-7) +#endif + + +LOCAL(boolean) +jpeg_fill_bit_buffer (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits) +/* Load up the bit buffer to a depth of at least nbits */ +{ + /* Copy heavily used state fields into locals (hopefully registers) */ + register const JOCTET * next_input_byte = state->next_input_byte; + register size_t bytes_in_buffer = state->bytes_in_buffer; + j_decompress_ptr cinfo = state->cinfo; + + /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ + /* (It is assumed that no request will be for more than that many bits.) */ + /* We fail to do so only if we hit a marker or are forced to suspend. */ + + if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ + while (bits_left < MIN_GET_BITS) { + register int c; + + /* Attempt to read a byte */ + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + + /* If it's 0xFF, check and discard stuffed zero byte */ + if (c == 0xFF) { + /* Loop here to discard any padding FF's on terminating marker, + * so that we can save a valid unread_marker value. NOTE: we will + * accept multiple FF's followed by a 0 as meaning a single FF data + * byte. This data pattern is not valid according to the standard. + */ + do { + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + } while (c == 0xFF); + + if (c == 0) { + /* Found FF/00, which represents an FF data byte */ + c = 0xFF; + } else { + /* Oops, it's actually a marker indicating end of compressed data. + * Save the marker code for later use. + * Fine point: it might appear that we should save the marker into + * bitread working state, not straight into permanent state. But + * once we have hit a marker, we cannot need to suspend within the + * current MCU, because we will read no more bytes from the data + * source. So it is OK to update permanent state right away. + */ + cinfo->unread_marker = c; + /* See if we need to insert some fake zero bits. */ + goto no_more_bytes; + } + } + + /* OK, load c into get_buffer */ + get_buffer = (get_buffer << 8) | c; + bits_left += 8; + } /* end while */ + } else { + no_more_bytes: + /* We get here if we've read the marker that terminates the compressed + * data segment. There should be enough bits in the buffer register + * to satisfy the request; if so, no problem. + */ + if (nbits > bits_left) { + /* Uh-oh. Report corrupted data to user and stuff zeroes into + * the data stream, so that we can produce some kind of image. + * We use a nonvolatile flag to ensure that only one warning message + * appears per data segment. + */ + if (! ((huff_entropy_ptr) cinfo->entropy)->insufficient_data) { + WARNMS(cinfo, JWRN_HIT_MARKER); + ((huff_entropy_ptr) cinfo->entropy)->insufficient_data = TRUE; + } + /* Fill the buffer with zero bits */ + get_buffer <<= MIN_GET_BITS - bits_left; + bits_left = MIN_GET_BITS; + } + } + + /* Unload the local registers */ + state->next_input_byte = next_input_byte; + state->bytes_in_buffer = bytes_in_buffer; + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + return TRUE; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and sub will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define BIT_MASK(nbits) ((1<<(nbits))-1) +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) - ((1<<(s))-1) : (x)) + +#else + +#define BIT_MASK(nbits) bmask[nbits] +#define HUFF_EXTEND(x,s) ((x) <= bmask[(s) - 1] ? (x) - bmask[s] : (x)) + +static const int bmask[16] = /* bmask[n] is mask for n rightmost bits */ + { 0, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF, + 0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF }; + +#endif /* AVOID_TABLES */ + + +/* + * Out-of-line code for Huffman code decoding. + */ + +LOCAL(int) +jpeg_huff_decode (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits) +{ + register int l = min_bits; + register INT32 code; + + /* HUFF_DECODE has determined that the code is at least min_bits */ + /* bits long, so fetch that many bits in one swoop. */ + + CHECK_BIT_BUFFER(*state, l, return -1); + code = GET_BITS(l); + + /* Collect the rest of the Huffman code one bit at a time. */ + /* This is per Figure F.16 in the JPEG spec. */ + + while (code > htbl->maxcode[l]) { + code <<= 1; + CHECK_BIT_BUFFER(*state, 1, return -1); + code |= GET_BITS(1); + l++; + } + + /* Unload the local registers */ + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + /* With garbage input we may reach the sentinel value l = 17. */ + + if (l > 16) { + WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); + return 0; /* fake a zero as the safest result */ + } + + return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; +} + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci; + + finish_pass_huff(cinfo); + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Re-init EOB run count, too */ + entropy->saved.EOBRUN = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Huffman MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + * (Wholesale zeroing is usually a little faster than retail...) + * + * We return FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * spectral selection, since we'll just re-assign them on the next call. + * Successive approximation AC refinement has to be more careful, however.) + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int Al = cinfo->Al; + register int s, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl * tbl; + jpeg_component_info * compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + tbl = entropy->derived_tbls[compptr->dc_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, tbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Convert DC difference to actual value, update last_dc_val */ + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (s << Al); + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval if using restarts */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state. + * We can avoid loading/saving bitread state if in an EOB run. + */ + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + + if (EOBRUN) /* if it's a band of zeroes... */ + EOBRUN--; /* ...process it now (we do nothing) */ + else { + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + for (k = cinfo->Ss; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, return FALSE, label2); + r = s >> 4; + s &= 15; + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (s << Al); + } else { + if (r != 15) { /* EOBr, run length is 2^r + appended bits */ + if (r) { /* EOBr, r > 0 */ + EOBRUN = 1 << r; + CHECK_BIT_BUFFER(br_state, r, return FALSE); + r = GET_BITS(r); + EOBRUN += r; + EOBRUN--; /* this band is processed at this moment */ + } + break; /* force end-of-band */ + } + k += 15; /* ZRL: skip 15 zeroes in band */ + } + } + + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + } + + /* Completed MCU, so update state */ + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval if using restarts */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + JCOEF p1; + int blkn; + BITREAD_STATE_VARS; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* Not worth the cycles to check insufficient_data here, + * since we will not change the data anyway if we read zeroes. + */ + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* Encoded data is simply the next bit of the two's-complement DC value */ + CHECK_BIT_BUFFER(br_state, 1, return FALSE); + if (GET_BITS(1)) + MCU_data[blkn][0][0] |= p1; + /* Note: since we use |=, repeating the assignment later is safe */ + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + + /* Account for restart interval if using restarts */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se; + JCOEF p1, m1; + const int * natural_order; + JBLOCKROW block; + JCOEFPTR thiscoef; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + int num_newnz; + int newnz_pos[DCTSIZE2]; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, don't modify the MCU. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = -p1; /* -1 in the bit position being coded */ + natural_order = cinfo->natural_order; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + /* If we are forced to suspend, we must undo the assignments to any newly + * nonzero coefficients in the block, because otherwise we'd get confused + * next time about which coefficients were already nonzero. + * But we need not undo addition of bits to already-nonzero coefficients; + * instead, we can test the current bit to see if we already did it. + */ + num_newnz = 0; + + /* initialize coefficient loop counter to start of band */ + k = cinfo->Ss; + + if (EOBRUN == 0) { + do { + HUFF_DECODE(s, br_state, tbl, goto undoit, label3); + r = s >> 4; + s &= 15; + if (s) { + if (s != 1) /* size of new coef should always be 1 */ + WARNMS(cinfo, JWRN_HUFF_BAD_CODE); + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) + s = p1; /* newly nonzero coef is positive */ + else + s = m1; /* newly nonzero coef is negative */ + } else { + if (r != 15) { + EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ + if (r) { + CHECK_BIT_BUFFER(br_state, r, goto undoit); + r = GET_BITS(r); + EOBRUN += r; + } + break; /* rest of block is handled by EOB logic */ + } + /* note s = 0 for processing ZRL */ + } + /* Advance over already-nonzero coefs and r still-zero coefs, + * appending correction bits to the nonzeroes. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } else { + if (--r < 0) + break; /* reached target zero coefficient */ + } + k++; + } while (k <= Se); + if (s) { + int pos = natural_order[k]; + /* Output newly nonzero coefficient */ + (*block)[pos] = (JCOEF) s; + /* Remember its position in case we have to suspend */ + newnz_pos[num_newnz++] = pos; + } + k++; + } while (k <= Se); + } + + if (EOBRUN) { + /* Scan any remaining coefficient positions after the end-of-band + * (the last newly nonzero coefficient, if any). Append a correction + * bit to each already-nonzero coefficient. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } + k++; + } while (k <= Se); + /* Count one block completed in EOB run */ + EOBRUN--; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval if using restarts */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; + +undoit: + /* Re-zero any output coefficients that we made newly nonzero */ + while (num_newnz) + (*block)[newnz_pos[--num_newnz]] = 0; + + return FALSE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * partial blocks. + */ + +METHODDEF(boolean) +decode_mcu_sub (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + int Se, blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + natural_order = cinfo->natural_order; + Se = cinfo->lim_Se; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in natural_order[] will save us + * if k > Se, which could happen if the data is corrupted. + */ + (*block)[natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval if using restarts */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * full-size blocks. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo, entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in jpeg_natural_order[] will save us + * if k >= DCTSIZE2, which could happen if the data is corrupted. + */ + (*block)[jpeg_natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo, entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval if using restarts */ + if (cinfo->restart_interval) + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, blkn, tbl, i; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + /* Arguably the maximum Al value should be less than 13 for 8-bit + * precision, but the spec doesn't say so, and we try to be liberal + * about what we accept. Note: large Al values could result in + * out-of-range DC coefficients during early scans, leading to bizarre + * displays due to overflows in the IDCT math. But we won't crash. + */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Make sure requested tables are present, and compute derived tables. + * We may build same derived table more than once, but it's not expensive. + */ + if (cinfo->Ss == 0) { + if (cinfo->Ah == 0) { /* DC refinement needs no table */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->derived_tbls[tbl]); + } + } else { + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->derived_tbls[tbl]); + /* remember the single active table */ + entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize private state variables */ + entropy->saved.EOBRUN = 0; + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning because + * there are some baseline files out there with all zeroes in these bytes. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + ((cinfo->is_baseline || cinfo->Se < DCTSIZE2) && + cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + + /* Select MCU decoding routine */ + /* We retain the hard-coded case for full-size blocks. + * This is not necessary, but it appears that this version is slightly + * more performant in the given implementation. + * With an improved implementation we would prefer a single optimized + * function. + */ + if (cinfo->lim_Se != DCTSIZE2-1) + entropy->pub.decode_mcu = decode_mcu_sub; + else + entropy->pub.decode_mcu = decode_mcu; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + if (cinfo->lim_Se) { /* AC needs no table when not present */ + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Precalculate decoding info for each block in an MCU of this scan */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + /* Precalculate which table to use for each block */ + entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; + entropy->ac_cur_tbls[blkn] = /* AC needs no table when not present */ + cinfo->lim_Se ? entropy->ac_derived_tbls[compptr->ac_tbl_no] : NULL; + /* Decide whether we really care about the coefficient values */ + if (compptr->component_needed) { + ci = compptr->DCT_v_scaled_size; + i = compptr->DCT_h_scaled_size; + switch (cinfo->lim_Se) { + case (1*1-1): + entropy->coef_limit[blkn] = 1; + break; + case (2*2-1): + if (ci <= 0 || ci > 2) ci = 2; + if (i <= 0 || i > 2) i = 2; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order2[ci - 1][i - 1]; + break; + case (3*3-1): + if (ci <= 0 || ci > 3) ci = 3; + if (i <= 0 || i > 3) i = 3; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order3[ci - 1][i - 1]; + break; + case (4*4-1): + if (ci <= 0 || ci > 4) ci = 4; + if (i <= 0 || i > 4) i = 4; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order4[ci - 1][i - 1]; + break; + case (5*5-1): + if (ci <= 0 || ci > 5) ci = 5; + if (i <= 0 || i > 5) i = 5; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order5[ci - 1][i - 1]; + break; + case (6*6-1): + if (ci <= 0 || ci > 6) ci = 6; + if (i <= 0 || i > 6) i = 6; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order6[ci - 1][i - 1]; + break; + case (7*7-1): + if (ci <= 0 || ci > 7) ci = 7; + if (i <= 0 || i > 7) i = 7; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order7[ci - 1][i - 1]; + break; + default: + if (ci <= 0 || ci > 8) ci = 8; + if (i <= 0 || i > 8) i = 8; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order[ci - 1][i - 1]; + } + } else { + entropy->coef_limit[blkn] = 0; + } + } + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->insufficient_data = FALSE; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Module initialization routine for Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(huff_entropy_decoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass_huff_decoder; + entropy->pub.finish_pass = finish_pass_huff; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * DCTSIZE2 * SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + } + } else { + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + } + } +} diff --git a/jpeg-9d/jdinput.c b/jpeg-9d/jdinput.c new file mode 100644 index 0000000..0199553 --- /dev/null +++ b/jpeg-9d/jdinput.c @@ -0,0 +1,662 @@ +/* + * jdinput.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input control logic for the JPEG decompressor. + * These routines are concerned with controlling the decompressor's input + * processing (marker reading and coefficient decoding). The actual input + * reading is done in jdmarker.c, jdhuff.c, and jdarith.c. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_input_controller pub; /* public fields */ + + int inheaders; /* Nonzero until first SOS is reached */ +} my_input_controller; + +typedef my_input_controller * my_inputctl_ptr; + + +/* Forward declarations */ +METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); + + +/* + * Routines to calculate various quantities related to the size of the image. + */ + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_core_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for transcoding and full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) { + /* Provide 1/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) { + /* Provide 2/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) { + /* Provide 3/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) { + /* Provide 4/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) { + /* Provide 5/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) { + /* Provide 6/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) { + /* Provide 7/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) { + /* Provide 8/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) { + /* Provide 9/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) { + /* Provide 10/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) { + /* Provide 11/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) { + /* Provide 12/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) { + /* Provide 13/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) { + /* Provide 14/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) { + /* Provide 15/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide 16/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + + /* Recompute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size; + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size; + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* initial_setup has already initialized DCT_scaled_size, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ +} + + +LOCAL(void) +initial_setup (j_decompress_ptr cinfo) +/* Called once, when first SOS marker is reached */ +{ + int ci; + jpeg_component_info *compptr; + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Only 8 to 12 bits data precision are supported for DCT based JPEG */ + if (cinfo->data_precision < 8 || cinfo->data_precision > 12) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Derive block_size, natural_order, and lim_Se */ + if (cinfo->is_baseline || (cinfo->progressive_mode && + cinfo->comps_in_scan)) { /* no pseudo SOS marker */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + } else + switch (cinfo->Se) { + case (1*1-1): + cinfo->block_size = 1; + cinfo->natural_order = jpeg_natural_order; /* not needed */ + cinfo->lim_Se = cinfo->Se; + break; + case (2*2-1): + cinfo->block_size = 2; + cinfo->natural_order = jpeg_natural_order2; + cinfo->lim_Se = cinfo->Se; + break; + case (3*3-1): + cinfo->block_size = 3; + cinfo->natural_order = jpeg_natural_order3; + cinfo->lim_Se = cinfo->Se; + break; + case (4*4-1): + cinfo->block_size = 4; + cinfo->natural_order = jpeg_natural_order4; + cinfo->lim_Se = cinfo->Se; + break; + case (5*5-1): + cinfo->block_size = 5; + cinfo->natural_order = jpeg_natural_order5; + cinfo->lim_Se = cinfo->Se; + break; + case (6*6-1): + cinfo->block_size = 6; + cinfo->natural_order = jpeg_natural_order6; + cinfo->lim_Se = cinfo->Se; + break; + case (7*7-1): + cinfo->block_size = 7; + cinfo->natural_order = jpeg_natural_order7; + cinfo->lim_Se = cinfo->Se; + break; + case (8*8-1): + cinfo->block_size = 8; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (9*9-1): + cinfo->block_size = 9; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (10*10-1): + cinfo->block_size = 10; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (11*11-1): + cinfo->block_size = 11; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (12*12-1): + cinfo->block_size = 12; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (13*13-1): + cinfo->block_size = 13; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (14*14-1): + cinfo->block_size = 14; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (15*15-1): + cinfo->block_size = 15; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (16*16-1): + cinfo->block_size = 16; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + default: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + break; + } + + /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size. + * In the full decompressor, + * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c; + * but in the transcoder, + * jpeg_calc_output_dimensions is not used, so we must do it here. + */ + cinfo->min_DCT_h_scaled_size = cinfo->block_size; + cinfo->min_DCT_v_scaled_size = cinfo->block_size; + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->block_size; + compptr->DCT_v_scaled_size = cinfo->block_size; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* downsampled_width and downsampled_height will also be overridden by + * jdmaster.c if we are doing full decompression. The transcoder library + * doesn't use these values, but the calling application might. + */ + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed, until color conversion says otherwise */ + compptr->component_needed = TRUE; + /* Mark no quantization table yet saved for component */ + compptr->quant_table = NULL; + } + + /* Compute number of fully interleaved MCU rows. */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + /* Decide whether file contains multiple scans */ + if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) + cinfo->inputctl->has_multiple_scans = TRUE; + else + cinfo->inputctl->has_multiple_scans = FALSE; +} + + +LOCAL(void) +per_scan_setup (j_decompress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } +} + + +/* + * Save away a copy of the Q-table referenced by each component present + * in the current scan, unless already saved during a prior scan. + * + * In a multiple-scan JPEG file, the encoder could assign different components + * the same Q-table slot number, but change table definitions between scans + * so that each component uses a different Q-table. (The IJG encoder is not + * currently capable of doing this, but other encoders might.) Since we want + * to be able to dequantize all the components at the end of the file, this + * means that we have to save away the table actually used for each component. + * We do this by copying the table at the start of the first scan containing + * the component. + * The JPEG spec prohibits the encoder from changing the contents of a Q-table + * slot between scans of a component using that slot. If the encoder does so + * anyway, this decoder will simply use the Q-table values that were current + * at the start of the first scan for the component. + * + * The decompressor output side looks only at the saved quant tables, + * not at the current Q-table slots. + */ + +LOCAL(void) +latch_quant_tables (j_decompress_ptr cinfo) +{ + int ci, qtblno; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* No work if we already saved Q-table for this component */ + if (compptr->quant_table != NULL) + continue; + /* Make sure specified quantization table is present */ + qtblno = compptr->quant_tbl_no; + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + /* OK, save away the quantization table */ + qtbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(JQUANT_TBL)); + MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); + compptr->quant_table = qtbl; + } +} + + +/* + * Initialize the input modules to read a scan of compressed data. + * The first call to this is done by jdmaster.c after initializing + * the entire decompressor (during jpeg_start_decompress). + * Subsequent calls come from consume_markers, below. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + per_scan_setup(cinfo); + latch_quant_tables(cinfo); + (*cinfo->entropy->start_pass) (cinfo); + (*cinfo->coef->start_input_pass) (cinfo); + cinfo->inputctl->consume_input = cinfo->coef->consume_data; +} + + +/* + * Finish up after inputting a compressed-data scan. + * This is called by the coefficient controller after it's read all + * the expected data of the scan. + */ + +METHODDEF(void) +finish_input_pass (j_decompress_ptr cinfo) +{ + (*cinfo->entropy->finish_pass) (cinfo); + cinfo->inputctl->consume_input = consume_markers; +} + + +/* + * Read JPEG markers before, between, or after compressed-data scans. + * Change state as necessary when a new scan is reached. + * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * The consume_input method pointer points either here or to the + * coefficient controller's consume_data routine, depending on whether + * we are reading a compressed data segment or inter-segment markers. + * + * Note: This function should NOT return a pseudo SOS marker (with zero + * component number) to the caller. A pseudo marker received by + * read_markers is processed and then skipped for other markers. + */ + +METHODDEF(int) +consume_markers (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + int val; + + if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ + return JPEG_REACHED_EOI; + + for (;;) { /* Loop to pass pseudo SOS marker */ + val = (*cinfo->marker->read_markers) (cinfo); + + switch (val) { + case JPEG_REACHED_SOS: /* Found SOS */ + if (inputctl->inheaders) { /* 1st SOS */ + if (inputctl->inheaders == 1) + initial_setup(cinfo); + if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */ + inputctl->inheaders = 2; + break; + } + inputctl->inheaders = 0; + /* Note: start_input_pass must be called by jdmaster.c + * before any more input can be consumed. jdapimin.c is + * responsible for enforcing this sequencing. + */ + } else { /* 2nd or later SOS marker */ + if (! inputctl->pub.has_multiple_scans) + ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ + if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */ + break; + start_input_pass(cinfo); + } + return val; + case JPEG_REACHED_EOI: /* Found EOI */ + inputctl->pub.eoi_reached = TRUE; + if (inputctl->inheaders) { /* Tables-only datastream, apparently */ + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_NO_SOS); + } else { + /* Prevent infinite loop in coef ctlr's decompress_data routine + * if user set output_scan_number larger than number of scans. + */ + if (cinfo->output_scan_number > cinfo->input_scan_number) + cinfo->output_scan_number = cinfo->input_scan_number; + } + return val; + case JPEG_SUSPENDED: + return val; + default: + return val; + } + } +} + + +/* + * Reset state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + + inputctl->pub.consume_input = consume_markers; + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; + /* Reset other modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->marker->reset_marker_reader) (cinfo); + /* Reset progression state -- would be cleaner if entropy decoder did this */ + cinfo->coef_bits = NULL; +} + + +/* + * Initialize the input controller module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl; + + /* Create subobject in permanent pool */ + inputctl = (my_inputctl_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_input_controller)); + cinfo->inputctl = &inputctl->pub; + /* Initialize method pointers */ + inputctl->pub.consume_input = consume_markers; + inputctl->pub.reset_input_controller = reset_input_controller; + inputctl->pub.start_input_pass = start_input_pass; + inputctl->pub.finish_input_pass = finish_input_pass; + /* Initialize state: can't use reset_input_controller since we don't + * want to try to reset other modules yet. + */ + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; +} diff --git a/Jpeg/jdmainct.c b/jpeg-9d/jdmainct.c similarity index 73% rename from Jpeg/jdmainct.c rename to jpeg-9d/jdmainct.c index cd55e8c..4d738fb 100644 --- a/Jpeg/jdmainct.c +++ b/jpeg-9d/jdmainct.c @@ -2,6 +2,7 @@ * jdmainct.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2016 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -13,13 +14,11 @@ * supplies the equivalent of the main buffer in that case. */ -/* suppress the warnings about using main for the variable names */ -#define main jpegMain - #define JPEG_INTERNALS #include "jinclude.h" #include "jpeglib.h" + /* * In the current system design, the main buffer need never be a full-image * buffer; any full-height buffers will be found inside the coefficient or @@ -27,8 +26,8 @@ * trivial. Its responsibility is to provide context rows for upsampling/ * rescaling, and doing this in an efficient fashion is a bit tricky. * - * Postprocessor input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * Postprocessor input data is counted in "row groups". A row group is + * defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size) * sample rows of each component. (We require DCT_scaled_size values to be * chosen such that these numbers are integers. In practice DCT_scaled_size * values will likely be powers of two, so we actually have the stronger @@ -38,8 +37,8 @@ * applying). * * The coefficient controller will deliver data to us one iMCU row at a time; - * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or - * exactly min_DCT_scaled_size row groups. (This amount of data corresponds + * each iMCU row contains v_samp_factor * DCT_v_scaled_size sample rows, or + * exactly min_DCT_v_scaled_size row groups. (This amount of data corresponds * to one row of MCUs when the image is fully interleaved.) Note that the * number of sample rows varies across components, but the number of row * groups does not. Some garbage sample rows may be included in the last iMCU @@ -76,7 +75,7 @@ * We could do this most simply by copying data around in our buffer, but * that'd be very slow. We can avoid copying any data by creating a rather * strange pointer structure. Here's how it works. We allocate a workspace - * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number + * consisting of M+2 row groups (where M = min_DCT_v_scaled_size is the number * of row groups per iMCU row). We create two sets of redundant pointers to * the workspace. Labeling the physical row groups 0 to M+1, the synthesized * pointer lists look like this: @@ -101,11 +100,11 @@ * the first or last sample row as necessary (this is cheaper than copying * sample rows around). * - * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that + * This scheme breaks down if M < 2, ie, min_DCT_v_scaled_size is 1. In that * situation each iMCU row provides only one row group so the buffering logic * must be different (eg, we must read two iMCU rows before we can emit the * first row group). For now, we simply do not support providing context - * rows when min_DCT_scaled_size is 1. That combination seems unlikely to + * rows when min_DCT_v_scaled_size is 1. That combination seems unlikely to * be worth providing --- if someone wants a 1/8th-size preview, they probably * want it quick and dirty, so a context-free upsampler is sufficient. */ @@ -119,17 +118,18 @@ typedef struct { /* Pointer to allocated workspace (M or M+2 row groups). */ JSAMPARRAY buffer[MAX_COMPONENTS]; - wxjpeg_boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ + JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ /* Remaining fields are only used in the context case. */ + boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ + /* These are the master pointers to the funny-order pointer lists. */ JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ int whichptr; /* indicates which pointer set is now in use */ int context_state; /* process_data state machine status */ - JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ } my_main_controller; @@ -141,12 +141,6 @@ typedef my_main_controller * my_main_ptr; #define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ -#if defined(__VISAGECPP__) -/* Visual Age fixups for multiple declarations */ -# define start_pass_main start_pass_main2 /* already in jcmaint.c */ -# define process_data_simple_main process_data_simple_main2 /* already in jcmaint.c */ -#endif - /* Forward declarations */ METHODDEF(void) process_data_simple_main JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, @@ -167,24 +161,24 @@ alloc_funny_pointers (j_decompress_ptr cinfo) * This is done only once, not once per pass. */ { - my_main_ptr main = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; int ci, rgroup; - int M = cinfo->min_DCT_scaled_size; + int M = cinfo->min_DCT_v_scaled_size; jpeg_component_info *compptr; JSAMPARRAY xbuf; /* Get top-level space for component array pointers. * We alloc both arrays with one call to save a few cycles. */ - main->xbuffer[0] = (JSAMPIMAGE) + mainp->xbuffer[0] = (JSAMPIMAGE) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); - main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components; + mainp->xbuffer[1] = mainp->xbuffer[0] + cinfo->num_components; for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ /* Get space for pointer lists --- M+4 row groups in each list. * We alloc both pointer lists with one call to save a few cycles. */ @@ -192,9 +186,9 @@ alloc_funny_pointers (j_decompress_ptr cinfo) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); xbuf += rgroup; /* want one row group at negative offsets */ - main->xbuffer[0][ci] = xbuf; + mainp->xbuffer[0][ci] = xbuf; xbuf += rgroup * (M + 4); - main->xbuffer[1][ci] = xbuf; + mainp->xbuffer[1][ci] = xbuf; } } @@ -202,26 +196,26 @@ alloc_funny_pointers (j_decompress_ptr cinfo) LOCAL(void) make_funny_pointers (j_decompress_ptr cinfo) /* Create the funny pointer lists discussed in the comments above. - * The actual workspace is already allocated (in main->buffer), + * The actual workspace is already allocated (in mainp->buffer), * and the space for the pointer lists is allocated too. * This routine just fills in the curiously ordered lists. * This will be repeated at the beginning of each pass. */ { - my_main_ptr main = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; + int M = cinfo->min_DCT_v_scaled_size; jpeg_component_info *compptr; JSAMPARRAY buf, xbuf0, xbuf1; for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = main->xbuffer[0][ci]; - xbuf1 = main->xbuffer[1][ci]; + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = mainp->xbuffer[0][ci]; + xbuf1 = mainp->xbuffer[1][ci]; /* First copy the workspace pointers as-is */ - buf = main->buffer[ci]; + buf = mainp->buffer[ci]; for (i = 0; i < rgroup * (M + 2); i++) { xbuf0[i] = xbuf1[i] = buf[i]; } @@ -248,18 +242,18 @@ set_wraparound_pointers (j_decompress_ptr cinfo) * This changes the pointer list state from top-of-image to the normal state. */ { - my_main_ptr main = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; + int M = cinfo->min_DCT_v_scaled_size; jpeg_component_info *compptr; JSAMPARRAY xbuf0, xbuf1; for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = main->xbuffer[0][ci]; - xbuf1 = main->xbuffer[1][ci]; + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = mainp->xbuffer[0][ci]; + xbuf1 = mainp->xbuffer[1][ci]; for (i = 0; i < rgroup; i++) { xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; @@ -277,7 +271,7 @@ set_bottom_pointers (j_decompress_ptr cinfo) * Also sets rowgroups_avail to indicate number of nondummy row groups in row. */ { - my_main_ptr main = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; int ci, i, rgroup, iMCUheight, rows_left; jpeg_component_info *compptr; JSAMPARRAY xbuf; @@ -285,8 +279,8 @@ set_bottom_pointers (j_decompress_ptr cinfo) for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { /* Count sample rows in one iMCU row and in one row group */ - iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size; - rgroup = iMCUheight / cinfo->min_DCT_scaled_size; + iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size; + rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size; /* Count nondummy sample rows remaining for this component */ rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); if (rows_left == 0) rows_left = iMCUheight; @@ -294,12 +288,12 @@ set_bottom_pointers (j_decompress_ptr cinfo) * so we need only do it once. */ if (ci == 0) { - main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); + mainp->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); } /* Duplicate the last real sample row rgroup*2 times; this pads out the * last partial rowgroup and ensures at least one full rowgroup of context. */ - xbuf = main->xbuffer[main->whichptr][ci]; + xbuf = mainp->xbuffer[mainp->whichptr][ci]; for (i = 0; i < rgroup * 2; i++) { xbuf[rows_left + i] = xbuf[rows_left-1]; } @@ -314,27 +308,27 @@ set_bottom_pointers (j_decompress_ptr cinfo) METHODDEF(void) start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) { - my_main_ptr main = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; switch (pass_mode) { case JBUF_PASS_THRU: if (cinfo->upsample->need_context_rows) { - main->pub.process_data = process_data_context_main; + mainp->pub.process_data = process_data_context_main; make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ - main->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ - main->context_state = CTX_PREPARE_FOR_IMCU; - main->iMCU_row_ctr = 0; + mainp->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ + mainp->context_state = CTX_PREPARE_FOR_IMCU; + mainp->iMCU_row_ctr = 0; + mainp->buffer_full = FALSE; /* Mark buffer empty */ } else { /* Simple case with no context needed */ - main->pub.process_data = process_data_simple_main; + mainp->pub.process_data = process_data_simple_main; + mainp->rowgroup_ctr = mainp->rowgroups_avail; /* Mark buffer empty */ } - main->buffer_full = FALSE; /* Mark buffer empty */ - main->rowgroup_ctr = 0; break; #ifdef QUANT_2PASS_SUPPORTED case JBUF_CRANK_DEST: /* For last pass of 2-pass quantization, just crank the postprocessor */ - main->pub.process_data = process_data_crank_post; + mainp->pub.process_data = process_data_crank_post; break; #endif default: @@ -354,33 +348,24 @@ process_data_simple_main (j_decompress_ptr cinfo, JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail) { - my_main_ptr main = (my_main_ptr) cinfo->main; - JDIMENSION rowgroups_avail; + my_main_ptr mainp = (my_main_ptr) cinfo->main; /* Read input data if we haven't filled the main buffer yet */ - if (! main->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer)) + if (mainp->rowgroup_ctr >= mainp->rowgroups_avail) { + if (! (*cinfo->coef->decompress_data) (cinfo, mainp->buffer)) return; /* suspension forced, can do nothing more */ - main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + mainp->rowgroup_ctr = 0; /* OK, we have an iMCU row to work with */ } - /* There are always min_DCT_scaled_size row groups in an iMCU row. */ - rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size; /* Note: at the bottom of the image, we may pass extra garbage row groups * to the postprocessor. The postprocessor has to check for bottom * of image anyway (at row resolution), so no point in us doing it too. */ /* Feed the postprocessor */ - (*cinfo->post->post_process_data) (cinfo, main->buffer, - &main->rowgroup_ctr, rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - - /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ - if (main->rowgroup_ctr >= rowgroups_avail) { - main->buffer_full = FALSE; - main->rowgroup_ctr = 0; - } + (*cinfo->post->post_process_data) (cinfo, mainp->buffer, + &mainp->rowgroup_ctr, mainp->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); } @@ -394,15 +379,15 @@ process_data_context_main (j_decompress_ptr cinfo, JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail) { - my_main_ptr main = (my_main_ptr) cinfo->main; + my_main_ptr mainp = (my_main_ptr) cinfo->main; /* Read input data if we haven't filled the main buffer yet */ - if (! main->buffer_full) { + if (! mainp->buffer_full) { if (! (*cinfo->coef->decompress_data) (cinfo, - main->xbuffer[main->whichptr])) + mainp->xbuffer[mainp->whichptr])) return; /* suspension forced, can do nothing more */ - main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - main->iMCU_row_ctr++; /* count rows received */ + mainp->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + mainp->iMCU_row_ctr++; /* count rows received */ } /* Postprocessor typically will not swallow all the input data it is handed @@ -410,47 +395,47 @@ process_data_context_main (j_decompress_ptr cinfo, * to exit and restart. This switch lets us keep track of how far we got. * Note that each case falls through to the next on successful completion. */ - switch (main->context_state) { + switch (mainp->context_state) { case CTX_POSTPONED_ROW: /* Call postprocessor using previously set pointers for postponed row */ - (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], - &main->rowgroup_ctr, main->rowgroups_avail, + (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr], + &mainp->rowgroup_ctr, mainp->rowgroups_avail, output_buf, out_row_ctr, out_rows_avail); - if (main->rowgroup_ctr < main->rowgroups_avail) + if (mainp->rowgroup_ctr < mainp->rowgroups_avail) return; /* Need to suspend */ - main->context_state = CTX_PREPARE_FOR_IMCU; + mainp->context_state = CTX_PREPARE_FOR_IMCU; if (*out_row_ctr >= out_rows_avail) return; /* Postprocessor exactly filled output buf */ /*FALLTHROUGH*/ case CTX_PREPARE_FOR_IMCU: /* Prepare to process first M-1 row groups of this iMCU row */ - main->rowgroup_ctr = 0; - main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1); + mainp->rowgroup_ctr = 0; + mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1); /* Check for bottom of image: if so, tweak pointers to "duplicate" * the last sample row, and adjust rowgroups_avail to ignore padding rows. */ - if (main->iMCU_row_ctr == cinfo->total_iMCU_rows) + if (mainp->iMCU_row_ctr == cinfo->total_iMCU_rows) set_bottom_pointers(cinfo); - main->context_state = CTX_PROCESS_IMCU; + mainp->context_state = CTX_PROCESS_IMCU; /*FALLTHROUGH*/ case CTX_PROCESS_IMCU: /* Call postprocessor using previously set pointers */ - (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], - &main->rowgroup_ctr, main->rowgroups_avail, + (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr], + &mainp->rowgroup_ctr, mainp->rowgroups_avail, output_buf, out_row_ctr, out_rows_avail); - if (main->rowgroup_ctr < main->rowgroups_avail) + if (mainp->rowgroup_ctr < mainp->rowgroups_avail) return; /* Need to suspend */ /* After the first iMCU, change wraparound pointers to normal state */ - if (main->iMCU_row_ctr == 1) + if (mainp->iMCU_row_ctr == 1) set_wraparound_pointers(cinfo); /* Prepare to load new iMCU row using other xbuffer list */ - main->whichptr ^= 1; /* 0=>1 or 1=>0 */ - main->buffer_full = FALSE; + mainp->whichptr ^= 1; /* 0=>1 or 1=>0 */ + mainp->buffer_full = FALSE; /* Still need to process last row group of this iMCU row, */ /* which is saved at index M+1 of the other xbuffer */ - main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1); - main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2); - main->context_state = CTX_POSTPONED_ROW; + mainp->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1); + mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2); + mainp->context_state = CTX_POSTPONED_ROW; } } @@ -481,17 +466,17 @@ process_data_crank_post (j_decompress_ptr cinfo, */ GLOBAL(void) -jinit_d_main_controller (j_decompress_ptr cinfo, wxjpeg_boolean need_full_buffer) +jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) { - my_main_ptr main; + my_main_ptr mainp; int ci, rgroup, ngroups; jpeg_component_info *compptr; - main = (my_main_ptr) + mainp = (my_main_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_d_main_controller *) main; - main->pub.start_pass = start_pass_main; + cinfo->main = &mainp->pub; + mainp->pub.start_pass = start_pass_main; if (need_full_buffer) /* shouldn't happen */ ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); @@ -500,30 +485,23 @@ jinit_d_main_controller (j_decompress_ptr cinfo, wxjpeg_boolean need_full_buffer * ngroups is the number of row groups we need. */ if (cinfo->upsample->need_context_rows) { - if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */ + if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */ ERREXIT(cinfo, JERR_NOTIMPL); alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ - ngroups = cinfo->min_DCT_scaled_size + 2; + ngroups = cinfo->min_DCT_v_scaled_size + 2; } else { - ngroups = cinfo->min_DCT_scaled_size; + /* There are always min_DCT_v_scaled_size row groups in an iMCU row. */ + ngroups = cinfo->min_DCT_v_scaled_size; + mainp->rowgroups_avail = (JDIMENSION) ngroups; } for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - main->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * compptr->DCT_scaled_size, - (JDIMENSION) (rgroup * ngroups)); + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + mainp->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + (JDIMENSION) (rgroup * ngroups)); } } - -#if defined(__VISAGECPP__) -# ifdef start_pass_main2 -# undef start_pass_main2 -# endif -# ifdef process_data_simple_main2 -# undef process_data_simple_main2 -# endif -#endif diff --git a/Jpeg/jdmarker.c b/jpeg-9d/jdmarker.c similarity index 85% rename from Jpeg/jdmarker.c rename to jpeg-9d/jdmarker.c index 39bed54..c10fde6 100644 --- a/Jpeg/jdmarker.c +++ b/jpeg-9d/jdmarker.c @@ -2,6 +2,7 @@ * jdmarker.c * * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -22,24 +23,24 @@ typedef enum { /* JPEG marker codes */ M_SOF1 = 0xc1, M_SOF2 = 0xc2, M_SOF3 = 0xc3, - + M_SOF5 = 0xc5, M_SOF6 = 0xc6, M_SOF7 = 0xc7, - + M_JPG = 0xc8, M_SOF9 = 0xc9, M_SOF10 = 0xca, M_SOF11 = 0xcb, - + M_SOF13 = 0xcd, M_SOF14 = 0xce, M_SOF15 = 0xcf, - + M_DHT = 0xc4, - + M_DAC = 0xcc, - + M_RST0 = 0xd0, M_RST1 = 0xd1, M_RST2 = 0xd2, @@ -48,7 +49,7 @@ typedef enum { /* JPEG marker codes */ M_RST5 = 0xd5, M_RST6 = 0xd6, M_RST7 = 0xd7, - + M_SOI = 0xd8, M_EOI = 0xd9, M_SOS = 0xda, @@ -57,7 +58,7 @@ typedef enum { /* JPEG marker codes */ M_DRI = 0xdd, M_DHP = 0xde, M_EXP = 0xdf, - + M_APP0 = 0xe0, M_APP1 = 0xe1, M_APP2 = 0xe2, @@ -74,13 +75,14 @@ typedef enum { /* JPEG marker codes */ M_APP13 = 0xed, M_APP14 = 0xee, M_APP15 = 0xef, - + M_JPG0 = 0xf0, + M_JPG8 = 0xf8, M_JPG13 = 0xfd, M_COM = 0xfe, - + M_TEM = 0x01, - + M_ERROR = 0x100 } JPEG_MARKER; @@ -193,7 +195,7 @@ typedef my_marker_reader * my_marker_ptr; */ -LOCAL(wxjpeg_boolean) +LOCAL(boolean) get_soi (j_decompress_ptr cinfo) /* Process an SOI marker */ { @@ -216,6 +218,7 @@ get_soi (j_decompress_ptr cinfo) /* Set initial assumptions for colorspace etc */ cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->color_transform = JCT_NONE; cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ cinfo->saw_JFIF_marker = FALSE; @@ -233,15 +236,17 @@ get_soi (j_decompress_ptr cinfo) } -LOCAL(wxjpeg_boolean) -get_sof (j_decompress_ptr cinfo, wxjpeg_boolean is_prog, wxjpeg_boolean is_arith) +LOCAL(boolean) +get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog, + boolean is_arith) /* Process a SOFn marker */ { - JPEG_INT32 length; - int c, ci; + INT32 length; + int c, ci, i; jpeg_component_info * compptr; INPUT_VARS(cinfo); + cinfo->is_baseline = is_baseline; cinfo->progressive_mode = is_prog; cinfo->arith_code = is_arith; @@ -264,8 +269,8 @@ get_sof (j_decompress_ptr cinfo, wxjpeg_boolean is_prog, wxjpeg_boolean is_arith /* We don't support files in which the image height is initially specified */ /* as 0 and is later redefined by DNL. As long as we have to check that, */ /* might as well have a general sanity check. */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0) + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 || + cinfo->num_components <= 0) ERREXIT(cinfo, JERR_EMPTY_IMAGE); if (length != (cinfo->num_components * 3)) @@ -275,11 +280,27 @@ get_sof (j_decompress_ptr cinfo, wxjpeg_boolean is_prog, wxjpeg_boolean is_arith cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->num_components * SIZEOF(jpeg_component_info)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { + + for (ci = 0; ci < cinfo->num_components; ci++) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Check to see whether component id has already been seen */ + /* (in violation of the spec, but unfortunately seen in some */ + /* files). If so, create "fake" component id equal to the */ + /* max id seen so far + 1. */ + for (i = 0, compptr = cinfo->comp_info; i < ci; i++, compptr++) { + if (c == compptr->component_id) { + compptr = cinfo->comp_info; + c = compptr->component_id; + compptr++; + for (i = 1; i < ci; i++, compptr++) { + if (compptr->component_id > c) c = compptr->component_id; + } + c++; + break; + } + } + compptr->component_id = c; compptr->component_index = ci; - INPUT_BYTE(cinfo, compptr->component_id, return FALSE); INPUT_BYTE(cinfo, c, return FALSE); compptr->h_samp_factor = (c >> 4) & 15; compptr->v_samp_factor = (c ) & 15; @@ -297,17 +318,17 @@ get_sof (j_decompress_ptr cinfo, wxjpeg_boolean is_prog, wxjpeg_boolean is_arith } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) get_sos (j_decompress_ptr cinfo) /* Process a SOS marker */ { - JPEG_INT32 length; - int i, ci, n, c, cc; + INT32 length; + int c, ci, i, n; jpeg_component_info * compptr; INPUT_VARS(cinfo); if (! cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOS_NO_SOF); + ERREXITS(cinfo, JERR_SOF_BEFORE, "SOS"); INPUT_2BYTES(cinfo, length, return FALSE); @@ -315,7 +336,9 @@ get_sos (j_decompress_ptr cinfo) TRACEMS1(cinfo, 1, JTRC_SOS, n); - if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN) + if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN || + (n == 0 && !cinfo->progressive_mode)) + /* pseudo SOS marker only allowed in progressive mode */ ERREXIT(cinfo, JERR_BAD_LENGTH); cinfo->comps_in_scan = n; @@ -323,24 +346,41 @@ get_sos (j_decompress_ptr cinfo) /* Collect the component-spec parameters */ for (i = 0; i < n; i++) { - INPUT_BYTE(cinfo, cc, return FALSE); INPUT_BYTE(cinfo, c, return FALSE); - + + /* Detect the case where component id's are not unique, and, if so, */ + /* create a fake component id using the same logic as in get_sof. */ + /* Note: This also ensures that all of the SOF components are */ + /* referenced in the single scan case, which prevents access to */ + /* uninitialized memory in later decoding stages. */ + for (ci = 0; ci < i; ci++) { + if (c == cinfo->cur_comp_info[ci]->component_id) { + c = cinfo->cur_comp_info[0]->component_id; + for (ci = 1; ci < i; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (compptr->component_id > c) c = compptr->component_id; + } + c++; + break; + } + } + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - if (cc == compptr->component_id) + if (c == compptr->component_id) goto id_found; } - ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, c); id_found: cinfo->cur_comp_info[i] = compptr; + INPUT_BYTE(cinfo, c, return FALSE); compptr->dc_tbl_no = (c >> 4) & 15; compptr->ac_tbl_no = (c ) & 15; - - TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, + + TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, compptr->component_id, compptr->dc_tbl_no, compptr->ac_tbl_no); } @@ -359,8 +399,8 @@ get_sos (j_decompress_ptr cinfo) /* Prepare to scan data & restart markers */ cinfo->marker->next_restart_num = 0; - /* Count another SOS marker */ - cinfo->input_scan_number++; + /* Count another (non-pseudo) SOS marker */ + if (n) cinfo->input_scan_number++; INPUT_SYNC(cinfo); return TRUE; @@ -369,11 +409,11 @@ get_sos (j_decompress_ptr cinfo) #ifdef D_ARITH_CODING_SUPPORTED -LOCAL(wxjpeg_boolean) +LOCAL(boolean) get_dac (j_decompress_ptr cinfo) /* Process a DAC marker */ { - JPEG_INT32 length; + INT32 length; int index, val; INPUT_VARS(cinfo); @@ -415,11 +455,11 @@ get_dac (j_decompress_ptr cinfo) #endif /* D_ARITH_CODING_SUPPORTED */ -LOCAL(wxjpeg_boolean) +LOCAL(boolean) get_dht (j_decompress_ptr cinfo) /* Process a DHT marker */ { - JPEG_INT32 length; + INT32 length; UINT8 bits[17]; UINT8 huffval[256]; int i, index, count; @@ -453,7 +493,7 @@ get_dht (j_decompress_ptr cinfo) /* Here we just do minimal validation of the counts to avoid walking * off the end of our table space. jdhuff.c will check more carefully. */ - if (count > 256 || ((JPEG_INT32) count) > length) + if (count > 256 || ((INT32) count) > length) ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); for (i = 0; i < count; i++) @@ -475,7 +515,8 @@ get_dht (j_decompress_ptr cinfo) *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); + if (count > 0) + MEMCOPY((*htblptr)->huffval, huffval, count * SIZEOF(UINT8)); } if (length != 0) @@ -486,20 +527,22 @@ get_dht (j_decompress_ptr cinfo) } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) get_dqt (j_decompress_ptr cinfo) /* Process a DQT marker */ { - JPEG_INT32 length; - int n, i, prec; + INT32 length, count, i; + int n, prec; unsigned int tmp; JQUANT_TBL *quant_ptr; + const int *natural_order; INPUT_VARS(cinfo); INPUT_2BYTES(cinfo, length, return FALSE); length -= 2; while (length > 0) { + length--; INPUT_BYTE(cinfo, n, return FALSE); prec = n >> 4; n &= 0x0F; @@ -513,13 +556,43 @@ get_dqt (j_decompress_ptr cinfo) cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); quant_ptr = cinfo->quant_tbl_ptrs[n]; - for (i = 0; i < DCTSIZE2; i++) { + if (prec) { + if (length < DCTSIZE2 * 2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length >> 1; + } else + count = DCTSIZE2; + } else { + if (length < DCTSIZE2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length; + } else + count = DCTSIZE2; + } + + switch ((int) count) { + case (2*2): natural_order = jpeg_natural_order2; break; + case (3*3): natural_order = jpeg_natural_order3; break; + case (4*4): natural_order = jpeg_natural_order4; break; + case (5*5): natural_order = jpeg_natural_order5; break; + case (6*6): natural_order = jpeg_natural_order6; break; + case (7*7): natural_order = jpeg_natural_order7; break; + default: natural_order = jpeg_natural_order; + } + + for (i = 0; i < count; i++) { if (prec) INPUT_2BYTES(cinfo, tmp, return FALSE); else INPUT_BYTE(cinfo, tmp, return FALSE); /* We convert the zigzag-order table to natural array order. */ - quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp; + quant_ptr->quantval[natural_order[i]] = (UINT16) tmp; } if (cinfo->err->trace_level >= 2) { @@ -532,8 +605,8 @@ get_dqt (j_decompress_ptr cinfo) } } - length -= DCTSIZE2+1; - if (prec) length -= DCTSIZE2; + length -= count; + if (prec) length -= count; } if (length != 0) @@ -544,11 +617,11 @@ get_dqt (j_decompress_ptr cinfo) } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) get_dri (j_decompress_ptr cinfo) /* Process a DRI marker */ { - JPEG_INT32 length; + INT32 length; unsigned int tmp; INPUT_VARS(cinfo); @@ -568,6 +641,68 @@ get_dri (j_decompress_ptr cinfo) } +LOCAL(boolean) +get_lse (j_decompress_ptr cinfo) +/* Process an LSE marker */ +{ + INT32 length; + unsigned int tmp; + int cid; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXITS(cinfo, JERR_SOF_BEFORE, "LSE"); + + if (cinfo->num_components < 3) goto bad; + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 24) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0x0D) /* ID inverse transform specification */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != MAXJSAMPLE) goto bad; /* MAXTRANS */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 3) goto bad; /* Nt=3 */ + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[1].component_id) goto bad; + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[0].component_id) goto bad; + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[2].component_id) goto bad; + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0x80) goto bad; /* F1: CENTER1=1, NORM1=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(1,1)=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(1,2)=0 */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* F2: CENTER2=0, NORM2=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 1) goto bad; /* A(2,1)=1 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(2,2)=0 */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* F3: CENTER3=0, NORM3=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 1) goto bad; /* A(3,1)=1 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) { /* A(3,2)=0 */ + bad: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + + /* OK, valid transform that we can handle. */ + cinfo->color_transform = JCT_SUBTRACT_GREEN; + + INPUT_SYNC(cinfo); + return TRUE; +} + + /* * Routines for processing APPn and COM markers. * These are either saved in memory or discarded, per application request. @@ -582,13 +717,13 @@ get_dri (j_decompress_ptr cinfo) LOCAL(void) examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, - unsigned int datalen, JPEG_INT32 remaining) + unsigned int datalen, INT32 remaining) /* Examine first few bytes from an APP0. * Take appropriate action if it is a JFIF marker. * datalen is # of bytes at data[], remaining is length of rest of marker data. */ { - JPEG_INT32 totallen = (JPEG_INT32) datalen + remaining; + INT32 totallen = (INT32) datalen + remaining; if (datalen >= APP0_DATA_LEN && GETJOCTET(data[0]) == 0x4A && @@ -604,12 +739,13 @@ examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); /* Check version. - * Major version must be 1, anything else signals an incompatible change. + * Major version must be 1 or 2, anything else signals an incompatible + * change. * (We used to treat this as an error, but now it's a nonfatal warning, * because some bozo at Hijaak couldn't read the spec.) * Minor version should be 0..2, but process anyway if newer. */ - if (cinfo->JFIF_major_version != 1) + if (cinfo->JFIF_major_version != 1 && cinfo->JFIF_major_version != 2) WARNMS2(cinfo, JWRN_JFIF_MAJOR, cinfo->JFIF_major_version, cinfo->JFIF_minor_version); /* Generate trace messages */ @@ -622,7 +758,7 @@ examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, GETJOCTET(data[12]), GETJOCTET(data[13])); totallen -= APP0_DATA_LEN; if (totallen != - ((JPEG_INT32)GETJOCTET(data[12]) * (JPEG_INT32)GETJOCTET(data[13]) * (JPEG_INT32) 3)) + ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); } else if (datalen >= 6 && GETJOCTET(data[0]) == 0x4A && @@ -647,7 +783,6 @@ examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, default: TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, GETJOCTET(data[5]), (int) totallen); - break; } } else { /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ @@ -658,7 +793,7 @@ examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, LOCAL(void) examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, - unsigned int datalen, JPEG_INT32 remaining) + unsigned int datalen, INT32 remaining) /* Examine first few bytes from an APP14. * Take appropriate action if it is an Adobe marker. * datalen is # of bytes at data[], remaining is length of rest of marker data. @@ -687,11 +822,11 @@ examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, } -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) get_interesting_appn (j_decompress_ptr cinfo) /* Process an APP0 or APP14 marker without saving it */ { - JPEG_INT32 length; + INT32 length; JOCTET b[APPN_DATA_LEN]; unsigned int i, numtoread; INPUT_VARS(cinfo); @@ -721,7 +856,6 @@ get_interesting_appn (j_decompress_ptr cinfo) default: /* can't get here unless jpeg_save_markers chooses wrong processor */ ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; } /* skip any remaining data -- could be lots */ @@ -735,7 +869,7 @@ get_interesting_appn (j_decompress_ptr cinfo) #ifdef SAVE_MARKERS_SUPPORTED -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) save_marker (j_decompress_ptr cinfo) /* Save an APPn or COM marker into the marker list */ { @@ -743,7 +877,7 @@ save_marker (j_decompress_ptr cinfo) jpeg_saved_marker_ptr cur_marker = marker->cur_marker; unsigned int bytes_read, data_length; JOCTET FAR * data; - JPEG_INT32 length = 0; + INT32 length = 0; INPUT_VARS(cinfo); if (cur_marker == NULL) { @@ -827,7 +961,6 @@ save_marker (j_decompress_ptr cinfo) default: TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) (data_length + length)); - break; } /* skip any remaining data -- could be lots */ @@ -841,11 +974,11 @@ save_marker (j_decompress_ptr cinfo) #endif /* SAVE_MARKERS_SUPPORTED */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) skip_variable (j_decompress_ptr cinfo) /* Skip over an unknown or uninteresting variable-length marker */ { - JPEG_INT32 length; + INT32 length; INPUT_VARS(cinfo); INPUT_2BYTES(cinfo, length, return FALSE); @@ -870,7 +1003,7 @@ skip_variable (j_decompress_ptr cinfo) * but it will never be 0 or FF. */ -LOCAL(wxjpeg_boolean) +LOCAL(boolean) next_marker (j_decompress_ptr cinfo) { int c; @@ -917,7 +1050,7 @@ next_marker (j_decompress_ptr cinfo) } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) first_marker (j_decompress_ptr cinfo) /* Like next_marker, but used to obtain the initial SOI marker. */ /* For this marker, we do not allow preceding garbage or fill; otherwise, @@ -946,6 +1079,11 @@ first_marker (j_decompress_ptr cinfo) * * Returns same codes as are defined for jpeg_consume_input: * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * Note: This function may return a pseudo SOS marker (with zero + * component number) for treat by input controller's consume_input. + * consume_input itself should filter out (skip) the pseudo marker + * after processing for the caller. */ METHODDEF(int) @@ -975,23 +1113,27 @@ read_markers (j_decompress_ptr cinfo) break; case M_SOF0: /* Baseline */ + if (! get_sof(cinfo, TRUE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + case M_SOF1: /* Extended sequential, Huffman */ - if (! get_sof(cinfo, FALSE, FALSE)) + if (! get_sof(cinfo, FALSE, FALSE, FALSE)) return JPEG_SUSPENDED; break; case M_SOF2: /* Progressive, Huffman */ - if (! get_sof(cinfo, TRUE, FALSE)) + if (! get_sof(cinfo, FALSE, TRUE, FALSE)) return JPEG_SUSPENDED; break; case M_SOF9: /* Extended sequential, arithmetic */ - if (! get_sof(cinfo, FALSE, TRUE)) + if (! get_sof(cinfo, FALSE, FALSE, TRUE)) return JPEG_SUSPENDED; break; case M_SOF10: /* Progressive, arithmetic */ - if (! get_sof(cinfo, TRUE, TRUE)) + if (! get_sof(cinfo, FALSE, TRUE, TRUE)) return JPEG_SUSPENDED; break; @@ -1013,32 +1155,37 @@ read_markers (j_decompress_ptr cinfo) return JPEG_SUSPENDED; cinfo->unread_marker = 0; /* processed the marker */ return JPEG_REACHED_SOS; - + case M_EOI: TRACEMS(cinfo, 1, JTRC_EOI); cinfo->unread_marker = 0; /* processed the marker */ return JPEG_REACHED_EOI; - + case M_DAC: if (! get_dac(cinfo)) return JPEG_SUSPENDED; break; - + case M_DHT: if (! get_dht(cinfo)) return JPEG_SUSPENDED; break; - + case M_DQT: if (! get_dqt(cinfo)) return JPEG_SUSPENDED; break; - + case M_DRI: if (! get_dri(cinfo)) return JPEG_SUSPENDED; break; - + + case M_JPG8: + if (! get_lse(cinfo)) + return JPEG_SUSPENDED; + break; + case M_APP0: case M_APP1: case M_APP2: @@ -1059,7 +1206,7 @@ read_markers (j_decompress_ptr cinfo) cinfo->unread_marker - (int) M_APP0]) (cinfo)) return JPEG_SUSPENDED; break; - + case M_COM: if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) return JPEG_SUSPENDED; @@ -1089,7 +1236,6 @@ read_markers (j_decompress_ptr cinfo) * ought to change! */ ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; } /* Successfully processed marker, so reset state variable */ cinfo->unread_marker = 0; @@ -1109,7 +1255,7 @@ read_markers (j_decompress_ptr cinfo) * it holds a marker which the decoder will be unable to read past. */ -METHODDEF(wxjpeg_boolean) +METHODDEF(boolean) read_restart_marker (j_decompress_ptr cinfo) { /* Obtain a marker unless we already did. */ @@ -1188,7 +1334,7 @@ read_restart_marker (j_decompress_ptr cinfo) * any other marker would have to be bogus data in that case. */ -GLOBAL(wxjpeg_boolean) +GLOBAL(boolean) jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) { int marker = cinfo->unread_marker; @@ -1265,10 +1411,9 @@ jinit_marker_reader (j_decompress_ptr cinfo) int i; /* Create subobject in permanent pool */ - marker = (my_marker_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_marker_reader)); - cinfo->marker = (struct jpeg_marker_reader *) marker; + marker = (my_marker_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_PERMANENT, SIZEOF(my_marker_reader)); + cinfo->marker = &marker->pub; /* Initialize public method pointers */ marker->pub.reset_marker_reader = reset_marker_reader; marker->pub.read_markers = read_markers; diff --git a/Jpeg/jdmaster.c b/jpeg-9d/jdmaster.c similarity index 73% rename from Jpeg/jdmaster.c rename to jpeg-9d/jdmaster.c index d687476..c309f76 100644 --- a/Jpeg/jdmaster.c +++ b/jpeg-9d/jdmaster.c @@ -2,6 +2,7 @@ * jdmaster.c * * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -15,6 +16,7 @@ #include "jinclude.h" #include "jpeglib.h" + /* Private state */ typedef struct { @@ -22,7 +24,7 @@ typedef struct { int pass_number; /* # of passes completed */ - wxjpeg_boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ /* Saved references to initialized quantizer modules, * in case we need to switch modes. @@ -39,17 +41,30 @@ typedef my_decomp_master * my_master_ptr; * CRUCIAL: this must match the actual capabilities of jdmerge.c! */ -LOCAL(wxjpeg_boolean) +LOCAL(boolean) use_merged_upsample (j_decompress_ptr cinfo) { #ifdef UPSAMPLE_MERGING_SUPPORTED - /* Merging is the equivalent of plain box-filter upsampling */ - if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) + /* Merging is the equivalent of plain box-filter upsampling. */ + /* The following condition is only needed if fancy shall select + * a different upsampling method. In our current implementation + * fancy only affects the DCT scaling, thus we can use fancy + * upsampling and merged upsample simultaneously, in particular + * with scaled DCT sizes larger than the default DCTSIZE. + */ +#if 0 + if (cinfo->do_fancy_upsampling) + return FALSE; +#endif + if (cinfo->CCIR601_sampling) return FALSE; /* jdmerge.c only supports YCC=>RGB color conversion */ - if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || + if ((cinfo->jpeg_color_space != JCS_YCbCr && + cinfo->jpeg_color_space != JCS_BG_YCC) || + cinfo->num_components != 3 || cinfo->out_color_space != JCS_RGB || - cinfo->out_color_components != RGB_PIXELSIZE) + cinfo->out_color_components != RGB_PIXELSIZE || + cinfo->color_transform) return FALSE; /* and it only handles 2h1v or 2h2v sampling ratios */ if (cinfo->comp_info[0].h_samp_factor != 2 || @@ -60,9 +75,12 @@ use_merged_upsample (j_decompress_ptr cinfo) cinfo->comp_info[2].v_samp_factor != 1) return FALSE; /* furthermore, it doesn't work if we've scaled the IDCTs differently */ - if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) + if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size) return FALSE; /* ??? also need to test for upsample-time rescaling, when & if supported */ return TRUE; /* by golly, it'll work... */ @@ -81,10 +99,12 @@ use_merged_upsample (j_decompress_ptr cinfo) GLOBAL(void) jpeg_calc_output_dimensions (j_decompress_ptr cinfo) -/* Do computations that are needed before master selection phase */ +/* Do computations that are needed before master selection phase. + * This function is used for full decompression. + */ { #ifdef IDCT_SCALING_SUPPORTED - int ci; + int ci, ssize; jpeg_component_info *compptr; #endif @@ -92,79 +112,57 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo) if (cinfo->global_state != DSTATE_READY) ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Compute core output image dimensions and DCT scaling choices. */ + jpeg_core_output_dimensions(cinfo); + #ifdef IDCT_SCALING_SUPPORTED - /* Compute actual output image dimensions and DCT scaling choices. */ - if (cinfo->scale_num * 8 <= cinfo->scale_denom) { - /* Provide 1/8 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 8L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 8L); - cinfo->min_DCT_scaled_size = 1; - } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { - /* Provide 1/4 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 4L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 4L); - cinfo->min_DCT_scaled_size = 2; - } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { - /* Provide 1/2 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 2L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 2L); - cinfo->min_DCT_scaled_size = 4; - } else { - /* Provide 1/1 scaling */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - cinfo->min_DCT_scaled_size = DCTSIZE; - } /* In selecting the actual DCT scaling for each component, we try to * scale up the chroma components via IDCT scaling rather than upsampling. * This saves time if the upsampler gets to use 1:1 scaling. - * Note this code assumes that the supported DCT scalings are powers of 2. + * Note this code adapts subsampling ratios which are powers of 2. */ for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; ci++, compptr++) { - int ssize = cinfo->min_DCT_scaled_size; - while (ssize < DCTSIZE && - (compptr->h_samp_factor * ssize * 2 <= - cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && - (compptr->v_samp_factor * ssize * 2 <= - cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { - ssize = ssize * 2; - } - compptr->DCT_scaled_size = ssize; - } + ssize = 1; + if (! cinfo->raw_data_out) + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == + 0) { + ssize = ssize * 2; + } + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; + if (! cinfo->raw_data_out) + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == + 0) { + ssize = ssize * 2; + } + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; - /* Recompute downsampled dimensions of components; - * application needs to know these if using raw downsampled data. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { + /* We don't support IDCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ /* Size in samples, after IDCT scaling */ compptr->downsampled_width = (JDIMENSION) jdiv_round_up((long) cinfo->image_width * - (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_h_samp_factor * DCTSIZE)); + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); compptr->downsampled_height = (JDIMENSION) jdiv_round_up((long) cinfo->image_height * - (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_v_samp_factor * DCTSIZE)); + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); } -#else /* !IDCT_SCALING_SUPPORTED */ - - /* Hardwire it to "no scaling" */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, - * and has computed unscaled downsampled_width and downsampled_height. - */ - #endif /* IDCT_SCALING_SUPPORTED */ /* Report number of components in selected colorspace. */ @@ -174,11 +172,13 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo) cinfo->out_color_components = 1; break; case JCS_RGB: + case JCS_BG_RGB: #if RGB_PIXELSIZE != 3 cinfo->out_color_components = RGB_PIXELSIZE; break; #endif /* else share code with YCbCr */ case JCS_YCbCr: + case JCS_BG_YCC: cinfo->out_color_components = 3; break; case JCS_CMYK: @@ -187,7 +187,6 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo) break; default: /* else must be same colorspace as in file */ cinfo->out_color_components = cinfo->num_components; - break; } cinfo->output_components = (cinfo->quantize_colors ? 1 : cinfo->out_color_components); @@ -214,30 +213,20 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo) * These processes all use a common table prepared by the routine below. * * For most steps we can mathematically guarantee that the initial value - * of x is within MAXJSAMPLE+1 of the legal range, so a table running from - * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial - * limiting step (just after the IDCT), a wildly out-of-range value is - * possible if the input data is corrupt. To avoid any chance of indexing + * of x is within 2*(MAXJSAMPLE+1) of the legal range, so a table running + * from -2*(MAXJSAMPLE+1) to 3*MAXJSAMPLE+2 is sufficient. But for the + * initial limiting step (just after the IDCT), a wildly out-of-range value + * is possible if the input data is corrupt. To avoid any chance of indexing * off the end of memory and getting a bad-pointer trap, we perform the * post-IDCT limiting thus: - * x = range_limit[x & MASK]; + * x = (sample_range_limit - SUBSET)[(x + CENTER) & MASK]; * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit * samples. Under normal circumstances this is more than enough range and * a correct output will be generated; with bogus input data the mask will * cause wraparound, and we will safely generate a bogus-but-in-range output. * For the post-IDCT step, we want to convert the data from signed to unsigned * representation by adding CENTERJSAMPLE at the same time that we limit it. - * So the post-IDCT limiting table ends up looking like this: - * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, - * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0,1,...,CENTERJSAMPLE-1 - * Negative inputs select values from the upper half of the table after - * masking. - * - * We can save some space by overlapping the start of the post-IDCT table - * with the simpler range limiting table. The post-IDCT table begins at - * sample_range_limit + CENTERJSAMPLE. + * This is accomplished with SUBSET = CENTER - CENTERJSAMPLE. * * Note that the table is allocated in near data space on PCs; it's small * enough and used often enough to justify this. @@ -250,25 +239,18 @@ prepare_range_limit_table (j_decompress_ptr cinfo) JSAMPLE * table; int i; - table = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ + table = (JSAMPLE *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (RANGE_CENTER * 2 + MAXJSAMPLE + 1) * SIZEOF(JSAMPLE)); + /* First segment of range limit table: limit[x] = 0 for x < 0 */ + MEMZERO(table, RANGE_CENTER * SIZEOF(JSAMPLE)); + table += RANGE_CENTER; /* allow negative subscripts of table */ cinfo->sample_range_limit = table; - /* First segment of "simple" table: limit[x] = 0 for x < 0 */ - MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); - /* Main part of "simple" table: limit[x] = x */ + /* Main part of range limit table: limit[x] = x */ for (i = 0; i <= MAXJSAMPLE; i++) table[i] = (JSAMPLE) i; - table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ - /* End of simple table, rest of first half of post-IDCT table */ - for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) + /* End of range limit table: limit[x] = MAXJSAMPLE for x > MAXJSAMPLE */ + for (; i <= MAXJSAMPLE + RANGE_CENTER; i++) table[i] = MAXJSAMPLE; - /* Second half of post-IDCT table */ - MEMZERO(table + (2 * (MAXJSAMPLE+1)), - (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), - cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); } @@ -287,14 +269,23 @@ LOCAL(void) master_selection (j_decompress_ptr cinfo) { my_master_ptr master = (my_master_ptr) cinfo->master; - wxjpeg_boolean use_c_buffer; + boolean use_c_buffer; long samplesperrow; JDIMENSION jd_samplesperrow; + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + /* Initialize dimensions and other stuff */ jpeg_calc_output_dimensions(cinfo); prepare_range_limit_table(cinfo); + /* Sanity check on image dimensions */ + if (cinfo->output_height <= 0 || cinfo->output_width <= 0 || + cinfo->out_color_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + /* Width of an output scanline must be representable as JDIMENSION. */ samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; jd_samplesperrow = (JDIMENSION) samplesperrow; @@ -371,17 +362,10 @@ master_selection (j_decompress_ptr cinfo) /* Inverse DCT */ jinit_inverse_dct(cinfo); /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); } /* Initialize principal buffer controllers. */ @@ -543,10 +527,9 @@ jinit_master_decompress (j_decompress_ptr cinfo) { my_master_ptr master; - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_decomp_master)); - cinfo->master = (struct jpeg_decomp_master *) master; + master = (my_master_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_decomp_master)); + cinfo->master = &master->pub; master->pub.prepare_for_output_pass = prepare_for_output_pass; master->pub.finish_output_pass = finish_output_pass; @@ -554,4 +537,3 @@ jinit_master_decompress (j_decompress_ptr cinfo) master_selection(cinfo); } - diff --git a/Jpeg/jdmerge.c b/jpeg-9d/jdmerge.c similarity index 69% rename from Jpeg/jdmerge.c rename to jpeg-9d/jdmerge.c index 55eab36..8b5c899 100644 --- a/Jpeg/jdmerge.c +++ b/jpeg-9d/jdmerge.c @@ -2,6 +2,7 @@ * jdmerge.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2013-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -23,7 +24,7 @@ * multiplications needed for color conversion. * * This file currently provides implementations for the following cases: - * YCbCr => RGB color conversion only. + * YCC => RGB color conversion only (YCbCr or BG_YCC). * Sampling ratios of 2h1v or 2h2v. * No scaling needed at upsample time. * Corner-aligned (non-CCIR601) sampling alignment. @@ -39,6 +40,12 @@ #ifdef UPSAMPLE_MERGING_SUPPORTED +#if RANGE_BITS < 2 + /* Deliberate syntax err */ + Sorry, this code requires 2 or more range extension bits. +#endif + + /* Private subobject */ typedef struct { @@ -52,8 +59,8 @@ typedef struct { /* Private state for YCC->RGB conversion */ int * Cr_r_tab; /* => table for Cr to R conversion */ int * Cb_b_tab; /* => table for Cb to B conversion */ - JPEG_INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - JPEG_INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ /* For 2:1 vertical sampling, we produce two output rows at a time. * We need a "spare" row buffer to hold the second output row if the @@ -61,7 +68,7 @@ typedef struct { * to discard the dummy last row if the image height is odd. */ JSAMPROW spare_row; - wxjpeg_boolean spare_full; /* T if spare buffer is occupied */ + boolean spare_full; /* T if spare buffer is occupied */ JDIMENSION out_row_width; /* samples per output row */ JDIMENSION rows_to_go; /* counts rows remaining in image */ @@ -70,50 +77,79 @@ typedef struct { typedef my_upsampler * my_upsample_ptr; #define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((JPEG_INT32) ((x) * (1L<RGB colorspace conversion. + * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion. * This is taken directly from jdcolor.c; see that file for more info. */ LOCAL(void) build_ycc_rgb_table (j_decompress_ptr cinfo) +/* Normal case, sYCC */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int i; + INT32 x; + SHIFT_TEMPS + + upsample->Cr_r_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.402 * x */ + upsample->Cr_r_tab[i] = (int) DESCALE(FIX(1.402) * x, SCALEBITS); + /* Cb=>B value is nearest int to 1.772 * x */ + upsample->Cb_b_tab[i] = (int) DESCALE(FIX(1.772) * x, SCALEBITS); + /* Cr=>G value is scaled-up -0.714136286 * x */ + upsample->Cr_g_tab[i] = (- FIX(0.714136286)) * x; + /* Cb=>G value is scaled-up -0.344136286 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + upsample->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF; + } +} + + +LOCAL(void) +build_bg_ycc_rgb_table (j_decompress_ptr cinfo) +/* Wide gamut case, bg-sYCC */ { my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; int i; - JPEG_INT32 x; + INT32 x; SHIFT_TEMPS - upsample->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cr_g_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(JPEG_INT32)); - upsample->Cb_g_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(JPEG_INT32)); + upsample->Cr_r_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32)); for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - upsample->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - upsample->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ + /* Cr=>R value is nearest int to 2.804 * x */ + upsample->Cr_r_tab[i] = (int) DESCALE(FIX(2.804) * x, SCALEBITS); + /* Cb=>B value is nearest int to 3.544 * x */ + upsample->Cb_b_tab[i] = (int) DESCALE(FIX(3.544) * x, SCALEBITS); + /* Cr=>G value is scaled-up -1.428272572 * x */ + upsample->Cr_g_tab[i] = (- FIX(1.428272572)) * x; + /* Cb=>G value is scaled-up -0.688272572 * x */ /* We also add in ONE_HALF so that need not do it in inner loop */ - upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + upsample->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF; } } @@ -237,8 +273,8 @@ h2v1_merged_upsample (j_decompress_ptr cinfo, register JSAMPLE * range_limit = cinfo->sample_range_limit; int * Crrtab = upsample->Cr_r_tab; int * Cbbtab = upsample->Cb_b_tab; - JPEG_INT32 * Crgtab = upsample->Cr_g_tab; - JPEG_INT32 * Cbgtab = upsample->Cb_g_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; SHIFT_TEMPS inptr0 = input_buf[0][in_row_group_ctr]; @@ -250,35 +286,36 @@ h2v1_merged_upsample (j_decompress_ptr cinfo, /* Do the chroma part of the calculation */ cb = GETJSAMPLE(*inptr1++); cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; + cred = Crrtab[cr]; cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; + cblue = Cbbtab[cb]; /* Fetch 2 Y values and emit 2 pixels */ y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_RED] = range_limit[y + cred]; outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr[RGB_BLUE] = range_limit[y + cblue]; outptr += RGB_PIXELSIZE; y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_RED] = range_limit[y + cred]; outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr[RGB_BLUE] = range_limit[y + cblue]; outptr += RGB_PIXELSIZE; } /* If image width is odd, do the last output column separately */ if (cinfo->output_width & 1) { cb = GETJSAMPLE(*inptr1); cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; + cred = Crrtab[cr]; cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; + cblue = Cbbtab[cb]; y = GETJSAMPLE(*inptr0); - outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_RED] = range_limit[y + cred]; outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr[RGB_BLUE] = range_limit[y + cblue]; } } + /* * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. */ @@ -298,8 +335,8 @@ h2v2_merged_upsample (j_decompress_ptr cinfo, register JSAMPLE * range_limit = cinfo->sample_range_limit; int * Crrtab = upsample->Cr_r_tab; int * Cbbtab = upsample->Cb_b_tab; - JPEG_INT32 * Crgtab = upsample->Cr_g_tab; - JPEG_INT32 * Cbgtab = upsample->Cb_g_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; SHIFT_TEMPS inptr00 = input_buf[0][in_row_group_ctr*2]; @@ -313,46 +350,46 @@ h2v2_merged_upsample (j_decompress_ptr cinfo, /* Do the chroma part of the calculation */ cb = GETJSAMPLE(*inptr1++); cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; + cred = Crrtab[cr]; cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; + cblue = Cbbtab[cb]; /* Fetch 4 Y values and emit 4 pixels */ y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_RED] = range_limit[y + cred]; outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; outptr0 += RGB_PIXELSIZE; y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_RED] = range_limit[y + cred]; outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; outptr0 += RGB_PIXELSIZE; y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_RED] = range_limit[y + cred]; outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; outptr1 += RGB_PIXELSIZE; y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_RED] = range_limit[y + cred]; outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; outptr1 += RGB_PIXELSIZE; } /* If image width is odd, do the last output column separately */ if (cinfo->output_width & 1) { cb = GETJSAMPLE(*inptr1); cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; + cred = Crrtab[cr]; cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; + cblue = Cbbtab[cb]; y = GETJSAMPLE(*inptr00); - outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_RED] = range_limit[y + cred]; outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; y = GETJSAMPLE(*inptr01); - outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_RED] = range_limit[y + cred]; outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; } } @@ -370,10 +407,9 @@ jinit_merged_upsampler (j_decompress_ptr cinfo) { my_upsample_ptr upsample; - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample = (my_upsample_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_upsampler)); + cinfo->upsample = &upsample->pub; upsample->pub.start_pass = start_pass_merged_upsample; upsample->pub.need_context_rows = FALSE; @@ -383,9 +419,9 @@ jinit_merged_upsampler (j_decompress_ptr cinfo) upsample->pub.upsample = merged_2v_upsample; upsample->upmethod = h2v2_merged_upsample; /* Allocate a spare row buffer */ - upsample->spare_row = (JSAMPROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); + upsample->spare_row = (JSAMPROW) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) upsample->out_row_width * SIZEOF(JSAMPLE)); } else { upsample->pub.upsample = merged_1v_upsample; upsample->upmethod = h2v1_merged_upsample; @@ -393,7 +429,10 @@ jinit_merged_upsampler (j_decompress_ptr cinfo) upsample->spare_row = NULL; } - build_ycc_rgb_table(cinfo); + if (cinfo->jpeg_color_space == JCS_BG_YCC) + build_bg_ycc_rgb_table(cinfo); + else + build_ycc_rgb_table(cinfo); } #endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/jpeg-9d/jdosabcc.obj b/jpeg-9d/jdosabcc.obj new file mode 100644 index 0000000..eb60d86 Binary files /dev/null and b/jpeg-9d/jdosabcc.obj differ diff --git a/jpeg-9d/jdosamsc.obj b/jpeg-9d/jdosamsc.obj new file mode 100644 index 0000000..9b2905a Binary files /dev/null and b/jpeg-9d/jdosamsc.obj differ diff --git a/jpeg-9d/jdosaobj.txt b/jpeg-9d/jdosaobj.txt new file mode 100644 index 0000000..4318362 --- /dev/null +++ b/jpeg-9d/jdosaobj.txt @@ -0,0 +1,16 @@ +This archive contains already-assembled object files for JMEMDOSA.ASM +of the Independent JPEG Group's JPEG package. These files will be helpful +if you want to compile the IJG code for DOS, but don't have an assembler. + +These files were prepared from the 3/13/1992 version of JMEMDOSA.ASM, +which is still unchanged as of mid-1998. You can use these files with +releases 3 through 6 of the IJG code, and probably future releases too. + +To use these files, copy the proper version to JMEMDOSA.OBJ. Make sure +this file has a newer date than JMEMDOSA.ASM. Then compile the code as +usual. + +Object files included: + +JDOSAMSC.OBJ For Microsoft C version 5 or later. +JDOSABCC.OBJ For Borland C version 3.0 or later. diff --git a/Jpeg/jdpostct.c b/jpeg-9d/jdpostct.c similarity index 99% rename from Jpeg/jdpostct.c rename to jpeg-9d/jdpostct.c index e6bcd4a..571563d 100644 --- a/Jpeg/jdpostct.c +++ b/jpeg-9d/jdpostct.c @@ -247,7 +247,7 @@ post_process_2pass (j_decompress_ptr cinfo, */ GLOBAL(void) -jinit_d_post_controller (j_decompress_ptr cinfo, wxjpeg_boolean need_full_buffer) +jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) { my_post_ptr post; diff --git a/Jpeg/jdsample.c b/jpeg-9d/jdsample.c similarity index 65% rename from Jpeg/jdsample.c rename to jpeg-9d/jdsample.c index 8c8fc17..fd9907e 100644 --- a/Jpeg/jdsample.c +++ b/jpeg-9d/jdsample.c @@ -2,13 +2,14 @@ * jdsample.c * * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2002-2015 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains upsampling routines. * * Upsampling input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size) * sample rows of each component. Upsampling will normally produce * max_v_samp_factor pixel rows from each row group (but this could vary * if the upsampler is applying a scale factor of its own). @@ -237,11 +238,11 @@ h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, register JSAMPROW inptr, outptr; register JSAMPLE invalue; JSAMPROW outend; - int inrow; + int outrow; - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; + for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) { + inptr = input_data[outrow]; + outptr = output_data[outrow]; outend = outptr + cinfo->output_width; while (outptr < outend) { invalue = *inptr++; /* don't need GETJSAMPLE() here */ @@ -285,112 +286,6 @@ h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, } -/* - * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical. - * - * The upsampling algorithm is linear interpolation between pixel centers, - * also known as a "triangle filter". This is a good compromise between - * speed and visual quality. The centers of the output pixels are 1/4 and 3/4 - * of the way between input pixel centers. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF(void) -h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register int invalue; - register JDIMENSION colctr; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - /* Special case for first column */ - invalue = GETJSAMPLE(*inptr++); - *outptr++ = (JSAMPLE) invalue; - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2); - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel */ - invalue = GETJSAMPLE(*inptr++) * 3; - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2); - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2); - } - - /* Special case for last column */ - invalue = GETJSAMPLE(*inptr); - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2); - *outptr++ = (JSAMPLE) invalue; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical. - * Again a triangle filter; see comments for h2v1 case, above. - * - * It is OK for us to reference the adjacent input rows because we demanded - * context from the main buffer controller (see initialization code). - */ - -METHODDEF(void) -h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr0, inptr1, outptr; -#if BITS_IN_JSAMPLE == 8 - register int thiscolsum, lastcolsum, nextcolsum; -#else - register JPEG_INT32 thiscolsum, lastcolsum, nextcolsum; -#endif - register JDIMENSION colctr; - int inrow, outrow, v; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - for (v = 0; v < 2; v++) { - /* inptr0 points to nearest input row, inptr1 points to next nearest */ - inptr0 = input_data[inrow]; - if (v == 0) /* next nearest is row above */ - inptr1 = input_data[inrow-1]; - else /* next nearest is row below */ - inptr1 = input_data[inrow+1]; - outptr = output_data[outrow++]; - - /* Special case for first column */ - thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */ - /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */ - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - } - - /* Special case for last column */ - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4); - } - inrow++; - } -} - - /* * Module initialization routine for upsampling. */ @@ -401,13 +296,12 @@ jinit_upsampler (j_decompress_ptr cinfo) my_upsample_ptr upsample; int ci; jpeg_component_info * compptr; - wxjpeg_boolean need_buffer, do_fancy; int h_in_group, v_in_group, h_out_group, v_out_group; upsample = (my_upsample_ptr) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; + cinfo->upsample = &upsample->pub; upsample->pub.start_pass = start_pass_upsample; upsample->pub.upsample = sep_upsample; upsample->pub.need_context_rows = FALSE; /* until we find out differently */ @@ -415,11 +309,6 @@ jinit_upsampler (j_decompress_ptr cinfo) if (cinfo->CCIR601_sampling) /* this isn't supported */ ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1, - * so don't ask for it. - */ - do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1; - /* Verify we can handle the sampling factors, select per-component methods, * and create storage as needed. */ @@ -428,37 +317,30 @@ jinit_upsampler (j_decompress_ptr cinfo) /* Compute size of an "input group" after IDCT scaling. This many samples * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. */ - h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; + h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; h_out_group = cinfo->max_h_samp_factor; v_out_group = cinfo->max_v_samp_factor; upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ - need_buffer = TRUE; if (! compptr->component_needed) { /* Don't bother to upsample an uninteresting component. */ upsample->methods[ci] = noop_upsample; - need_buffer = FALSE; - } else if (h_in_group == h_out_group && v_in_group == v_out_group) { + continue; /* don't need to allocate buffer */ + } + if (h_in_group == h_out_group && v_in_group == v_out_group) { /* Fullsize components can be processed without any work. */ upsample->methods[ci] = fullsize_upsample; - need_buffer = FALSE; - } else if (h_in_group * 2 == h_out_group && - v_in_group == v_out_group) { - /* Special cases for 2h1v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) - upsample->methods[ci] = h2v1_fancy_upsample; - else - upsample->methods[ci] = h2v1_upsample; + continue; /* don't need to allocate buffer */ + } + if (h_in_group * 2 == h_out_group && v_in_group == v_out_group) { + /* Special case for 2h1v upsampling */ + upsample->methods[ci] = h2v1_upsample; } else if (h_in_group * 2 == h_out_group && v_in_group * 2 == v_out_group) { - /* Special cases for 2h2v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) { - upsample->methods[ci] = h2v2_fancy_upsample; - upsample->pub.need_context_rows = TRUE; - } else - upsample->methods[ci] = h2v2_upsample; + /* Special case for 2h2v upsampling */ + upsample->methods[ci] = h2v2_upsample; } else if ((h_out_group % h_in_group) == 0 && (v_out_group % v_in_group) == 0) { /* Generic integral-factors upsampling method */ @@ -467,12 +349,10 @@ jinit_upsampler (j_decompress_ptr cinfo) upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); } else ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - if (need_buffer) { - upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) jround_up((long) cinfo->output_width, - (long) cinfo->max_h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } + upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) jround_up((long) cinfo->output_width, + (long) cinfo->max_h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); } } diff --git a/Jpeg/jdtrans.c b/jpeg-9d/jdtrans.c similarity index 94% rename from Jpeg/jdtrans.c rename to jpeg-9d/jdtrans.c index d223886..22dd47f 100644 --- a/Jpeg/jdtrans.c +++ b/jpeg-9d/jdtrans.c @@ -2,6 +2,7 @@ * jdtrans.c * * Copyright (C) 1995-1997, Thomas G. Lane. + * Modified 2000-2009 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -99,18 +100,14 @@ transdecode_master_selection (j_decompress_ptr cinfo) /* This is effectively a buffered-image operation. */ cinfo->buffered_image = TRUE; + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); } /* Always get a full-image coefficient buffer. */ @@ -121,6 +118,7 @@ transdecode_master_selection (j_decompress_ptr cinfo) /* Initialize input side of decompressor to consume first scan. */ (*cinfo->inputctl->start_input_pass) (cinfo); + /* Initialize progress monitoring. */ if (cinfo->progress != NULL) { int nscans; @@ -140,4 +138,3 @@ transdecode_master_selection (j_decompress_ptr cinfo) cinfo->progress->total_passes = 1; } } - diff --git a/Jpeg/jerror.c b/jpeg-9d/jerror.c similarity index 98% rename from Jpeg/jerror.c rename to jpeg-9d/jerror.c index 660c4a6..7163af6 100644 --- a/Jpeg/jerror.c +++ b/jpeg-9d/jerror.c @@ -2,6 +2,7 @@ * jerror.c * * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2012-2015 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -18,16 +19,16 @@ * These routines are used by both the compression and decompression code. */ +#ifdef USE_WINDOWS_MESSAGEBOX +#include +#endif + /* this is not a core library module, so it doesn't define JPEG_INTERNALS */ #include "jinclude.h" #include "jpeglib.h" #include "jversion.h" #include "jerror.h" -#ifdef USE_WINDOWS_MESSAGEBOX -#include -#endif - #ifndef EXIT_FAILURE /* define exit() codes if not provided */ #define EXIT_FAILURE 1 #endif @@ -66,7 +67,7 @@ const char * const jpeg_std_message_table[] = { * or jpeg_destroy) at some point. */ -METHODDEF(void) +METHODDEF(noreturn_t) error_exit (j_common_ptr cinfo) { /* Always display the message */ @@ -161,7 +162,7 @@ format_message (j_common_ptr cinfo, char * buffer) const char * msgtext = NULL; const char * msgptr; char ch; - wxjpeg_boolean isstring; + boolean isstring; /* Look up message string in proper table */ if (msg_code > 0 && msg_code <= err->last_jpeg_message) { diff --git a/Jpeg/jerror.h b/jpeg-9d/jerror.h similarity index 93% rename from Jpeg/jerror.h rename to jpeg-9d/jerror.h index fc2fffe..db608b9 100644 --- a/Jpeg/jerror.h +++ b/jpeg-9d/jerror.h @@ -2,6 +2,7 @@ * jerror.h * * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 1997-2018 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -39,14 +40,15 @@ typedef enum { JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ /* For maintenance convenience, list is alphabetical by message code name */ -JMESSAGE(JERR_ARITH_NOTIMPL, - "Sorry, there are legal restrictions on arithmetic coding") JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") -JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") +JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported") +JMESSAGE(JERR_BAD_DROP_SAMPLING, + "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") @@ -82,7 +84,7 @@ JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") JMESSAGE(JERR_FILE_READ, "Input file read error") JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") -JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_CLEN_OUTOFBOUNDS, "Huffman code size table out of bounds") JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") @@ -93,6 +95,7 @@ JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") JMESSAGE(JERR_NOTIMPL, "Not implemented yet") JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") @@ -103,11 +106,11 @@ JMESSAGE(JERR_QUANT_COMPONENTS, "Cannot quantize more than %d color components") JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_BEFORE, "Invalid JPEG file structure: %s before SOF") JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") -JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") @@ -170,6 +173,7 @@ JMESSAGE(JTRC_UNKNOWN_IDS, JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") JMESSAGE(JWRN_BOGUS_PROGRESSION, "Inconsistent progression sequence for component %d coefficient %d") JMESSAGE(JWRN_EXTRANEOUS_DATA, @@ -227,6 +231,15 @@ JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") (cinfo)->err->msg_parm.i[2] = (p3), \ (cinfo)->err->msg_parm.i[3] = (p4), \ (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (cinfo)->err->msg_parm.i[4] = (p5), \ + (cinfo)->err->msg_parm.i[5] = (p6), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) #define ERREXITS(cinfo,code,str) \ ((cinfo)->err->msg_code = (code), \ strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ diff --git a/Jpeg/jfdctflt.c b/jpeg-9d/jfdctflt.c similarity index 81% rename from Jpeg/jfdctflt.c rename to jpeg-9d/jfdctflt.c index 79d7a00..013f29e 100644 --- a/Jpeg/jfdctflt.c +++ b/jpeg-9d/jfdctflt.c @@ -2,6 +2,7 @@ * jfdctflt.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2017 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -47,50 +48,57 @@ */ #if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ #endif /* * Perform the forward DCT on one block of samples. + * + * cK represents cos(K*pi/16). */ GLOBAL(void) -jpeg_fdct_float (FAST_FLOAT * data) +jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col) { FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; FAST_FLOAT tmp10, tmp11, tmp12, tmp13; FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; FAST_FLOAT *dataptr; + JSAMPROW elemptr; int ctr; /* Pass 1: process rows. */ dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7])); + tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7])); + tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6])); + tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6])); + tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5])); + tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5])); + tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4])); + tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4])); + /* Even part */ - + tmp10 = tmp0 + tmp3; /* phase 2 */ tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ + + /* Apply unsigned->signed conversion. */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ dataptr[4] = tmp10 - tmp11; - + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ dataptr[2] = tmp13 + z1; /* phase 5 */ dataptr[6] = tmp13 - z1; - + /* Odd part */ tmp10 = tmp4 + tmp5; /* phase 2 */ @@ -126,21 +134,21 @@ jpeg_fdct_float (FAST_FLOAT * data) tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - + /* Even part */ - + tmp10 = tmp0 + tmp3; /* phase 2 */ tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; - + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ dataptr[DCTSIZE*4] = tmp10 - tmp11; - + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ dataptr[DCTSIZE*6] = tmp13 - z1; - + /* Odd part */ tmp10 = tmp4 + tmp5; /* phase 2 */ diff --git a/Jpeg/jfdctfst.c b/jpeg-9d/jfdctfst.c similarity index 84% rename from Jpeg/jfdctfst.c rename to jpeg-9d/jfdctfst.c index 37900ec..5e4e017 100644 --- a/Jpeg/jfdctfst.c +++ b/jpeg-9d/jfdctfst.c @@ -2,6 +2,7 @@ * jfdctfst.c * * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2017 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -43,7 +44,7 @@ */ #if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ #endif @@ -76,10 +77,10 @@ */ #if CONST_BITS == 8 -#define FIX_0_382683433 ((JPEG_INT32) 98) /* FIX(0.382683433) */ -#define FIX_0_541196100 ((JPEG_INT32) 139) /* FIX(0.541196100) */ -#define FIX_0_707106781 ((JPEG_INT32) 181) /* FIX(0.707106781) */ -#define FIX_1_306562965 ((JPEG_INT32) 334) /* FIX(1.306562965) */ +#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ +#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ +#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ +#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ #else #define FIX_0_382683433 FIX(0.382683433) #define FIX_0_541196100 FIX(0.541196100) @@ -108,45 +109,52 @@ /* * Perform the forward DCT on one block of samples. + * + * cK represents cos(K*pi/16). */ GLOBAL(void) -jpeg_fdct_ifast (DCTELEM * data) +jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) { DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; DCTELEM tmp10, tmp11, tmp12, tmp13; DCTELEM z1, z2, z3, z4, z5, z11, z13; DCTELEM *dataptr; + JSAMPROW elemptr; int ctr; SHIFT_TEMPS /* Pass 1: process rows. */ dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + /* Even part */ - + tmp10 = tmp0 + tmp3; /* phase 2 */ tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ + + /* Apply unsigned->signed conversion. */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ dataptr[4] = tmp10 - tmp11; - + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ dataptr[2] = tmp13 + z1; /* phase 5 */ dataptr[6] = tmp13 - z1; - + /* Odd part */ tmp10 = tmp4 + tmp5; /* phase 2 */ @@ -182,21 +190,21 @@ jpeg_fdct_ifast (DCTELEM * data) tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - + /* Even part */ - + tmp10 = tmp0 + tmp3; /* phase 2 */ tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; - + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ dataptr[DCTSIZE*4] = tmp10 - tmp11; - + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ dataptr[DCTSIZE*6] = tmp13 - z1; - + /* Odd part */ tmp10 = tmp4 + tmp5; /* phase 2 */ diff --git a/jpeg-9d/jfdctint.c b/jpeg-9d/jfdctint.c new file mode 100644 index 0000000..05df475 --- /dev/null +++ b/jpeg-9d/jfdctint.c @@ -0,0 +1,4415 @@ +/* + * jfdctint.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modification developed 2003-2018 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide FDCT routines with various input sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 output DCT block. + * + * For N<8 we fill the remaining block coefficients with zero. + * For N>8 we apply a partial N-point FDCT on the input samples, computing + * just the lower 8 frequency coefficients and discarding the rest. + * + * We must scale the output coefficients of the N-point FDCT appropriately + * to the standard 8-point FDCT level by 8/N per 1-D pass. This scaling + * is folded into the constant multipliers (pass 2) and/or final/initial + * shifting. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D DCT step produces outputs which are a factor of sqrt(N) + * larger than the true DCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D DCT, + * because the y0 and y4 outputs need not be divided by sqrt(N). + * In the IJG code, this factor of 8 is removed by the quantization step + * (in jcdctmgr.c), NOT in this module. + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (For 12-bit sample data, the intermediate + * array is INT32 anyway.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_islow (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + dataptr[2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + +#ifdef DCT_SCALING_SUPPORTED + + +/* + * Perform the forward DCT on a 7x7 sample block. + */ + +GLOBAL(void) +jpeg_fdct_7x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/14). + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)**2 = 64/49, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x6 sample block. + */ + +GLOBAL(void) +jpeg_fdct_6x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/12). + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)**2 = 16/9, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x5 sample block. + */ + +GLOBAL(void) +jpeg_fdct_5x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/10). + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << (PASS1_BITS+1)); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)**2 = 64/25, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x4 sample block. + */ + +GLOBAL(void) +jpeg_fdct_4x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by (8/4)**2 = 2**2, which we add here. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+2)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-3); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-2); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x3 sample block. + */ + +GLOBAL(void) +jpeg_fdct_3x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2**2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/6). + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-2); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/3)**2 = 64/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x2 sample block. + */ + +GLOBAL(void) +jpeg_fdct_2x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + */ + + /* Row 0 */ + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp1 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Row 1 */ + elemptr = sample_data[1] + start_col; + + tmp2 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp3 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)**2 = 2**4. + */ + + /* Column 0 */ + /* Apply unsigned->signed conversion. */ + data[DCTSIZE*0] = (tmp0 + tmp2 - 4 * CENTERJSAMPLE) << 4; + data[DCTSIZE*1] = (tmp0 - tmp2) << 4; + + /* Column 1 */ + data[DCTSIZE*0+1] = (tmp1 + tmp3) << 4; + data[DCTSIZE*1+1] = (tmp1 - tmp3) << 4; +} + + +/* + * Perform the forward DCT on a 1x1 sample block. + */ + +GLOBAL(void) +jpeg_fdct_1x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM dcval; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + dcval = GETJSAMPLE(sample_data[0][start_col]); + + /* We leave the result scaled up by an overall factor of 8. */ + /* We must also scale the output by (8/1)**2 = 2**6. */ + /* Apply unsigned->signed conversion. */ + data[0] = (dcval - CENTERJSAMPLE) << 6; +} + + +/* + * Perform the forward DCT on a 9x9 sample block. + */ + +GLOBAL(void) +jpeg_fdct_9x9 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2; + DCTELEM workspace[8]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * we scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/18). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[8]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[7]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[6]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[5]); + tmp4 = GETJSAMPLE(elemptr[4]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[8]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[7]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[6]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[5]); + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((z1 + z2 - 9 * CENTERJSAMPLE) << 1); + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(0.707106781)), /* c6 */ + CONST_BITS-1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.328926049)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(0.707106781)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.083350441)) /* c4 */ + + z1 + z2, CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.245575608)) /* c8 */ + + z1 - z2, CONST_BITS-1); + + /* Odd part */ + + dataptr[3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.224744871)), /* c3 */ + CONST_BITS-1); + + tmp11 = MULTIPLY(tmp11, FIX(1.224744871)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(0.909038955)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.483689525)); /* c7 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS-1); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(1.392728481)); /* c1 */ + + dataptr[5] = (DCTELEM) DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 9) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/9)**2 = 64/81, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/18) * 128/81. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*0]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*7]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*6]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*5]; + tmp4 = dataptr[DCTSIZE*4]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*0]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*7]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*6]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*5]; + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2, FIX(1.580246914)), /* 128/81 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(1.117403309)), /* c6 */ + CONST_BITS+2); + z1 = MULTIPLY(tmp0 - tmp2, FIX(2.100031287)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(1.117403309)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.711961190)) /* c4 */ + + z1 + z2, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.388070096)) /* c8 */ + + z1 - z2, CONST_BITS+2); + + /* Odd part */ + + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.935399303)), /* c3 */ + CONST_BITS+2); + + tmp11 = MULTIPLY(tmp11, FIX(1.935399303)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(1.436506004)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.764348879)); /* c7 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS+2); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(2.200854883)); /* c1 */ + + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x10 sample block. + */ + +GLOBAL(void) +jpeg_fdct_10x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * we scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/20). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << 1); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-1); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-1); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << 1); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-1); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/10)**2 = 16/25, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+2); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+2); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+2); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 11x11 sample block. + */ + +GLOBAL(void) +jpeg_fdct_11x11 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3; + DCTELEM workspace[8*3]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * we scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/22). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[10]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[9]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[8]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[7]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[6]); + tmp5 = GETJSAMPLE(elemptr[5]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[10]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[9]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[8]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[7]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 - 11 * CENTERJSAMPLE) << 1); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.356927976)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.201263574)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.926112931)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.189712156)); /* c4 */ + dataptr[2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.018300590)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.390975730)), /* c4+c10 */ + CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.062335650)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.356927976)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.587485545)), /* c8 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.620527200)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.788749120)), /* c8+c10 */ + CONST_BITS-1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.286413905)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.068791298)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.764581576)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.719967871)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.398430003)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.764581576)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.399818907)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.276416582)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.068791298)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.398430003)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(1.989053629)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.399818907)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.305598626)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.286413905)); /* c3 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-1); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-1); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 11) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/11)**2 = 64/121, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/22) * 128/121. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*1]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*0]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*7]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*6]; + tmp5 = dataptr[DCTSIZE*5]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*2]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*1]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*0]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*7]; + tmp14 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5, + FIX(1.057851240)), /* 128/121 */ + CONST_BITS+2); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.435427942)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.212906922)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.979689713)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.258538479)); /* c4 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.077210542)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.471445400)), /* c4+c10 */ + CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.065941844)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.435427942)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.621472312)), /* c8 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.714276708)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.834379234)), /* c8+c10 */ + CONST_BITS+2); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.360834544)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.130622199)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.808813568)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.819470145)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.421479672)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.808813568)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.480800167)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.350258864)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.130622199)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.421479672)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(2.104122847)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.480800167)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.381129125)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.360834544)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x12 sample block. + */ + +GLOBAL(void) +jpeg_fdct_12x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/24). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) (tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE); + dataptr[6] = (DCTELEM) (tmp13 - tmp14 - tmp15); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/12)**2 = 4/9, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 13x13 sample block. + */ + +GLOBAL(void) +jpeg_fdct_13x13 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 z1, z2; + DCTELEM workspace[8*5]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/26). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[12]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[11]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[10]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[9]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[8]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[7]); + tmp6 = GETJSAMPLE(elemptr[6]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[12]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[11]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[10]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[9]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[8]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + (tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6 - 13 * CENTERJSAMPLE); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.373119086)) + /* c2 */ + MULTIPLY(tmp1, FIX(1.058554052)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.501487041)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.170464608)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.803364869)) - /* c8 */ + MULTIPLY(tmp5, FIX(1.252223920)), /* c4 */ + CONST_BITS); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.155388986)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.435816023)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.316450131)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.096834934)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.937303064)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.486914739)); /* (c8+c12)/2 */ + + dataptr[4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.322312651)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.163874945)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.937797057)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.338443458)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(2.020082300)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.318774355)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.937797057)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.338443458)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.163874945)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.837223564)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(2.341699410)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.657217813)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.572116027)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(2.260109708)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(2.205608352)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.742345811)); /* c1+c11 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 13) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/13)**2 = 64/169, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/26) * 128/169. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*2]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*1]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*0]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*7]; + tmp6 = dataptr[DCTSIZE*6]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*4]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*3]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*2]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*1]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*0]; + tmp15 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6, + FIX(0.757396450)), /* 128/169 */ + CONST_BITS+1); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.039995521)) + /* c2 */ + MULTIPLY(tmp1, FIX(0.801745081)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.379824504)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.129109289)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.608465700)) - /* c8 */ + MULTIPLY(tmp5, FIX(0.948429952)), /* c4 */ + CONST_BITS+1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(0.875087516)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.330085509)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.239678205)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.073342435)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.709910013)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.368787494)); /* (c8+c12)/2 */ + + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.001514908)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(0.881514751)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.710284161)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.256335874)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(1.530003162)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.241438564)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.710284161)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.256335874)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(0.881514751)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.634110155)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(1.773594819)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.497774438)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.190715098)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(1.711799069)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(1.670519935)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.319646532)); /* c1+c11 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x14 sample block. + */ + +GLOBAL(void) +jpeg_fdct_14x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/28). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + (tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) (tmp0 - tmp10 + tmp3 - tmp11 - tmp6); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/14)**2 = 16/49, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+1); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+1); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+1); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 15x15 sample block. + */ + +GLOBAL(void) +jpeg_fdct_15x15 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*7]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/30). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[14]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[13]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[12]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[11]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[10]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[9]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[8]); + tmp7 = GETJSAMPLE(elemptr[7]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[14]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[13]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[12]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[11]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[10]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[9]); + tmp16 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[8]); + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) (z1 + z2 + z3 - 15 * CENTERJSAMPLE); + z3 += z3; + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.144122806)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.437016024)), /* c12 */ + CONST_BITS); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.531135173)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.238241955)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.798468008)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.091361227)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.383309603)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(0.946293579)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.790569415)); /* (c6+c12)/2 */ + + dataptr[2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS); + dataptr[4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.224744871)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.831253876)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.224744871)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.406466353)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.575212477)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.475753014)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.513743148)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.700497885)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.355500862)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.176250899)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.869244010)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 15) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/15)**2 = 64/225, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/30) * 256/225. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*3]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*2]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*1]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*0]; + tmp7 = dataptr[DCTSIZE*7]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*4]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*3]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*2]; + tmp15 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*1]; + tmp16 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*0]; + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2 + z3, FIX(1.137777778)), /* 256/225 */ + CONST_BITS+2); + z3 += z3; + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.301757503)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.497227121)), /* c12 */ + CONST_BITS+2); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.742091575)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.546621957)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.908479156)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.103948774)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.573898926)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(1.076671805)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.899492312)); /* (c6+c12)/2 */ + + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS+2); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.393487498)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.945782187)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.393487498)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.600246161)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.654463974)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.541301207)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.584525538)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.934788705)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.404480980)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.476089912)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.989006518)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x16 sample block. + */ + +GLOBAL(void) +jpeg_fdct_16x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/16)**2 = 1/2**2. + * cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+2); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+10 */ + CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+2); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x8 sample block. + * + * 16-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_16x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + ctr = 0; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS+1); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x7 sample block. + * + * 14-point FDCT in pass 1 (rows), 7-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_14x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero bottom row of output coefficient block. */ + MEMZERO(&data[DCTSIZE*7], SIZEOF(DCTELEM) * DCTSIZE); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE) << PASS1_BITS); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) ((tmp0 - tmp10 + tmp3 - tmp11 - tmp6) << PASS1_BITS); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS-PASS1_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/14)*(8/7) = 32/49, which we + * partially fold into the constant multipliers and final shifting: + * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS+1); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS+1); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x6 sample block. + * + * 12-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_12x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 2 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*6], SIZEOF(DCTELEM) * DCTSIZE * 2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[6] = (DCTELEM) ((tmp13 - tmp14 - tmp15) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS-PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/12)*(8/6) = 8/9, which we + * partially fold into the constant multipliers and final shifting: + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x5 sample block. + * + * 10-point FDCT in pass 1 (rows), 5-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_10x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 3 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*5], SIZEOF(DCTELEM) * DCTSIZE * 3); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << PASS1_BITS); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << PASS1_BITS); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/10)*(8/5) = 32/25, which we + * fold into the constant multipliers: + * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 8x4 sample block. + * + * 8-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 4 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*4], SIZEOF(DCTELEM) * DCTSIZE * 4); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by 8/4 = 2, which we add here. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << (PASS1_BITS+1)); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + + dataptr[2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-1); + dataptr[6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS-PASS1_BITS-1); + dataptr[5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS-1); + dataptr[7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x3 sample block. + * + * 6-point FDCT in pass 1 (rows), 3-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS-1); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << (PASS1_BITS+1))); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << (PASS1_BITS+1)); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << (PASS1_BITS+1))); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x2 sample block. + * + * 4-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp2, tmp10, tmp12, tmp4, tmp5; + INT32 tmp1, tmp3, tmp11, tmp13; + INT32 z1, z2, z3; + JSAMPROW elemptr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + /* Row 0 */ + elemptr = sample_data[0] + start_col; + + /* Even part */ + + tmp4 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp5 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp0 = tmp4 + tmp5; + tmp2 = tmp4 - tmp5; + + /* Odd part */ + + z2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + z3 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-3-1); + tmp1 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Row 1 */ + elemptr = sample_data[1] + start_col; + + /* Even part */ + + tmp4 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp5 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = tmp4 + tmp5; + tmp12 = tmp4 - tmp5; + + /* Odd part */ + + z2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + z3 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp11 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/4)*(8/2) = 2**3. + */ + + /* Column 0 */ + /* Apply unsigned->signed conversion. */ + data[DCTSIZE*0] = (tmp0 + tmp10 - 8 * CENTERJSAMPLE) << 3; + data[DCTSIZE*1] = (tmp0 - tmp10) << 3; + + /* Column 1 */ + data[DCTSIZE*0+1] = (DCTELEM) RIGHT_SHIFT(tmp1 + tmp11, CONST_BITS-3); + data[DCTSIZE*1+1] = (DCTELEM) RIGHT_SHIFT(tmp1 - tmp11, CONST_BITS-3); + + /* Column 2 */ + data[DCTSIZE*0+2] = (tmp2 + tmp12) << 3; + data[DCTSIZE*1+2] = (tmp2 - tmp12) << 3; + + /* Column 3 */ + data[DCTSIZE*0+3] = (DCTELEM) RIGHT_SHIFT(tmp3 + tmp13, CONST_BITS-3); + data[DCTSIZE*1+3] = (DCTELEM) RIGHT_SHIFT(tmp3 - tmp13, CONST_BITS-3); +} + + +/* + * Perform the forward DCT on a 2x1 sample block. + * + * 2-point FDCT in pass 1 (rows), 1-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)*(8/1) = 2**5. + */ + + /* Even part */ + + /* Apply unsigned->signed conversion. */ + data[0] = (tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5; + + /* Odd part */ + + data[1] = (tmp0 - tmp1) << 5; +} + + +/* + * Perform the forward DCT on an 8x16 sample block. + * + * 8-point FDCT in pass 1 (rows), 16-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+1); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 7x14 sample block. + * + * 7-point FDCT in pass 1 (rows), 14-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_7x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)*(8/14) = 32/49, which we + * fold into the constant multipliers: + * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x12 sample block. + * + * 6-point FDCT in pass 1 (rows), 12-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/12) = 8/9, which we + * fold into the constant multipliers: + * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x10 sample block. + * + * 5-point FDCT in pass 1 (rows), 10-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_5x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)*(8/10) = 32/25, which we + * fold into the constant multipliers: + * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x8 sample block. + * + * 4-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by 8/4 = 2, which we add here. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+1)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-2); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x6 sample block. + * + * 3-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_3x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x4 sample block. + * + * 2-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) (tmp0 + tmp1 - 2 * CENTERJSAMPLE); + + /* Odd part */ + + dataptr[1] = (DCTELEM) (tmp0 - tmp1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)*(8/4) = 2**3. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp1) << 3); + dataptr[DCTSIZE*2] = (DCTELEM) ((tmp0 - tmp1) << 3); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-3-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-3); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-3); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 1x2 sample block. + * + * 1-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_1x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: empty. */ + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/1)*(8/2) = 2**5. + */ + + /* Even part */ + + tmp0 = GETJSAMPLE(sample_data[0][start_col]); + tmp1 = GETJSAMPLE(sample_data[1][start_col]); + + /* Apply unsigned->signed conversion. */ + data[DCTSIZE*0] = (tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5; + + /* Odd part */ + + data[DCTSIZE*1] = (tmp0 - tmp1) << 5; +} + +#endif /* DCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/Jpeg/jidctflt.c b/jpeg-9d/jidctflt.c similarity index 80% rename from Jpeg/jidctflt.c rename to jpeg-9d/jidctflt.c index a0f22c2..e33a2b5 100644 --- a/Jpeg/jidctflt.c +++ b/jpeg-9d/jidctflt.c @@ -2,6 +2,7 @@ * jidctflt.c * * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2010-2017 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -49,7 +50,7 @@ */ #if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ #endif @@ -62,6 +63,8 @@ /* * Perform dequantization and inverse DCT on one block of coefficients. + * + * cK represents cos(K*pi/16). */ GLOBAL(void) @@ -79,7 +82,6 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, JSAMPLE *range_limit = IDCT_range_limit(cinfo); int ctr; FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS /* Pass 1: process columns from input, store into work array. */ @@ -95,14 +97,14 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, * With typical images and quantization tables, half or more of the * column DCT calculations can be simplified this way. */ - + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) { /* AC terms all zero */ FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - + wsptr[DCTSIZE*0] = dcval; wsptr[DCTSIZE*1] = dcval; wsptr[DCTSIZE*2] = dcval; @@ -111,13 +113,13 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, wsptr[DCTSIZE*5] = dcval; wsptr[DCTSIZE*6] = dcval; wsptr[DCTSIZE*7] = dcval; - + inptr++; /* advance pointers to next column */ quantptr++; wsptr++; continue; } - + /* Even part */ tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); @@ -135,7 +137,7 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, tmp3 = tmp10 - tmp13; tmp1 = tmp11 + tmp12; tmp2 = tmp11 - tmp12; - + /* Odd part */ tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); @@ -152,12 +154,12 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ + tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ + tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ tmp6 = tmp12 - tmp7; /* phase 2 */ tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; + tmp4 = tmp10 - tmp5; wsptr[DCTSIZE*0] = tmp0 + tmp7; wsptr[DCTSIZE*7] = tmp0 - tmp7; @@ -165,16 +167,15 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, wsptr[DCTSIZE*6] = tmp1 - tmp6; wsptr[DCTSIZE*2] = tmp2 + tmp5; wsptr[DCTSIZE*5] = tmp2 - tmp5; - wsptr[DCTSIZE*4] = tmp3 + tmp4; - wsptr[DCTSIZE*3] = tmp3 - tmp4; + wsptr[DCTSIZE*3] = tmp3 + tmp4; + wsptr[DCTSIZE*4] = tmp3 - tmp4; inptr++; /* advance pointers to next column */ quantptr++; wsptr++; } - + /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3. */ wsptr = workspace; for (ctr = 0; ctr < DCTSIZE; ctr++) { @@ -184,14 +185,17 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, * the simplification applies less often (typically 5% to 10% of the time). * And testing floats for zero is relatively expensive, so we don't bother. */ - + /* Even part */ - tmp10 = wsptr[0] + wsptr[4]; - tmp11 = wsptr[0] - wsptr[4]; + /* Prepare range-limit and float->int conversion */ + z5 = wsptr[0] + (((FAST_FLOAT) RANGE_CENTER) + ((FAST_FLOAT) 0.5)); + tmp10 = z5 + wsptr[4]; + tmp11 = z5 - wsptr[4]; tmp13 = wsptr[2] + wsptr[6]; - tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; + tmp12 = (wsptr[2] - wsptr[6]) * + ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ tmp0 = tmp10 + tmp13; tmp3 = tmp10 - tmp13; @@ -205,36 +209,28 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, z11 = wsptr[1] + wsptr[7]; z12 = wsptr[1] - wsptr[7]; - tmp7 = z11 + z13; - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ + tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ + tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ - tmp6 = tmp12 - tmp7; + tmp6 = tmp12 - tmp7; /* phase 2 */ tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[(int) DESCALE((JPEG_INT32) (tmp0 + tmp7), 3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE((JPEG_INT32) (tmp0 - tmp7), 3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE((JPEG_INT32) (tmp1 + tmp6), 3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE((JPEG_INT32) (tmp1 - tmp6), 3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE((JPEG_INT32) (tmp2 + tmp5), 3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE((JPEG_INT32) (tmp2 - tmp5), 3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE((JPEG_INT32) (tmp3 + tmp4), 3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE((JPEG_INT32) (tmp3 - tmp4), 3) - & RANGE_MASK]; - + tmp4 = tmp10 - tmp5; + + /* Final output stage: float->int conversion and range-limit */ + + outptr[0] = range_limit[(int) (tmp0 + tmp7) & RANGE_MASK]; + outptr[7] = range_limit[(int) (tmp0 - tmp7) & RANGE_MASK]; + outptr[1] = range_limit[(int) (tmp1 + tmp6) & RANGE_MASK]; + outptr[6] = range_limit[(int) (tmp1 - tmp6) & RANGE_MASK]; + outptr[2] = range_limit[(int) (tmp2 + tmp5) & RANGE_MASK]; + outptr[5] = range_limit[(int) (tmp2 - tmp5) & RANGE_MASK]; + outptr[3] = range_limit[(int) (tmp3 + tmp4) & RANGE_MASK]; + outptr[4] = range_limit[(int) (tmp3 - tmp4) & RANGE_MASK]; + wsptr += DCTSIZE; /* advance pointer to next row */ } } diff --git a/Jpeg/jidctfst.c b/jpeg-9d/jidctfst.c similarity index 80% rename from Jpeg/jidctfst.c rename to jpeg-9d/jidctfst.c index d388b61..1ac3e39 100644 --- a/Jpeg/jidctfst.c +++ b/jpeg-9d/jidctfst.c @@ -2,6 +2,7 @@ * jidctfst.c * * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2015-2017 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -45,7 +46,7 @@ */ #if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ #endif @@ -89,10 +90,10 @@ */ #if CONST_BITS == 8 -#define FIX_1_082392200 ((JPEG_INT32) 277) /* FIX(1.082392200) */ -#define FIX_1_414213562 ((JPEG_INT32) 362) /* FIX(1.414213562) */ -#define FIX_1_847759065 ((JPEG_INT32) 473) /* FIX(1.847759065) */ -#define FIX_2_613125930 ((JPEG_INT32) 669) /* FIX(2.613125930) */ +#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ +#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ +#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ +#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ #else #define FIX_1_082392200 FIX(1.082392200) #define FIX_1_414213562 FIX(1.414213562) @@ -133,35 +134,10 @@ #endif -/* Like DESCALE, but applies to a DCTELEM and produces an int. - * We assume that int right shift is unsigned if INT32 right shift is. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS DCTELEM ishift_temp; -#if BITS_IN_JSAMPLE == 8 -#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ -#else -#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ -#endif -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -#ifdef USE_ACCURATE_ROUNDING -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) -#else -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) -#endif - - /* * Perform dequantization and inverse DCT on one block of coefficients. + * + * cK represents cos(K*pi/16). */ GLOBAL(void) @@ -180,7 +156,7 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, int ctr; int workspace[DCTSIZE2]; /* buffers data between passes */ SHIFT_TEMPS /* for DESCALE */ - ISHIFT_TEMPS /* for IDESCALE */ + ISHIFT_TEMPS /* for IRIGHT_SHIFT */ /* Pass 1: process columns from input, store into work array. */ @@ -253,12 +229,12 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */ + tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */ tmp6 = tmp12 - tmp7; /* phase 2 */ tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; + tmp4 = tmp10 - tmp5; wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); @@ -266,21 +242,28 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); - wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); - wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); + wsptr[DCTSIZE*3] = (int) (tmp3 + tmp4); + wsptr[DCTSIZE*4] = (int) (tmp3 - tmp4); inptr++; /* advance pointers to next column */ quantptr++; wsptr++; } - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + */ wsptr = workspace; for (ctr = 0; ctr < DCTSIZE; ctr++) { outptr = output_buf[ctr] + output_col; + + /* Add range center and fudge factor for final descale and range-limit. */ + z5 = (DCTELEM) wsptr[0] + + ((((DCTELEM) RANGE_CENTER) << (PASS1_BITS+3)) + + (1 << (PASS1_BITS+2))); + /* Rows of zeroes can be exploited in the same way as we did with columns. * However, the column calculation has created many nonzero AC terms, so * the simplification applies less often (typically 5% to 10% of the time). @@ -293,7 +276,7 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { /* AC terms all zero */ - JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) + JSAMPLE dcval = range_limit[(int) IRIGHT_SHIFT(z5, PASS1_BITS+3) & RANGE_MASK]; outptr[0] = dcval; @@ -312,12 +295,12 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, /* Even part */ - tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); - tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); + tmp10 = z5 + (DCTELEM) wsptr[4]; + tmp11 = z5 - (DCTELEM) wsptr[4]; - tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); - tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) - - tmp13; + tmp13 = (DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]; + tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], + FIX_1_414213562) - tmp13; /* 2*c4 */ tmp0 = tmp10 + tmp13; tmp3 = tmp10 - tmp13; @@ -335,30 +318,30 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */ + tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */ tmp6 = tmp12 - tmp7; /* phase 2 */ tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; + tmp4 = tmp10 - tmp5; /* Final output stage: scale down by a factor of 8 and range-limit */ - outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp7, PASS1_BITS+3) & RANGE_MASK]; - outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) + outptr[7] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp7, PASS1_BITS+3) & RANGE_MASK]; - outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp1 + tmp6, PASS1_BITS+3) & RANGE_MASK]; - outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) + outptr[6] = range_limit[(int) IRIGHT_SHIFT(tmp1 - tmp6, PASS1_BITS+3) & RANGE_MASK]; - outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) + outptr[2] = range_limit[(int) IRIGHT_SHIFT(tmp2 + tmp5, PASS1_BITS+3) & RANGE_MASK]; - outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) + outptr[5] = range_limit[(int) IRIGHT_SHIFT(tmp2 - tmp5, PASS1_BITS+3) & RANGE_MASK]; - outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) + outptr[3] = range_limit[(int) IRIGHT_SHIFT(tmp3 + tmp4, PASS1_BITS+3) & RANGE_MASK]; - outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) + outptr[4] = range_limit[(int) IRIGHT_SHIFT(tmp3 - tmp4, PASS1_BITS+3) & RANGE_MASK]; wsptr += DCTSIZE; /* advance pointer to next row */ diff --git a/jpeg-9d/jidctint.c b/jpeg-9d/jidctint.c new file mode 100644 index 0000000..e30ec8c --- /dev/null +++ b/jpeg-9d/jidctint.c @@ -0,0 +1,5240 @@ +/* + * jidctint.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modification developed 2002-2018 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide IDCT routines with various output sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 input DCT block. + * + * For N<8 we simply take the corresponding low-frequency coefficients of + * the 8x8 input DCT block and apply an NxN point IDCT on the sub-block + * to yield the downscaled outputs. + * This can be seen as direct low-pass downsampling from the DCT domain + * point of view rather than the usual spatial domain point of view, + * yielding significant computational savings and results at least + * as good as common bilinear (averaging) spatial downsampling. + * + * For N>8 we apply a partial NxN IDCT on the 8 input coefficients as + * lower frequencies and higher frequencies assumed to be zero. + * It turns out that the computational effort is similar to the 8x8 IDCT + * regarding the output size. + * Furthermore, the scaling and descaling is the same for all IDCT sizes. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) + * larger than the true IDCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D IDCT, + * because the y0 and y4 inputs need not be divided by sqrt(N). + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (To scale up 12-bit sample data further, an + * intermediate INT32 array would be needed.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce an int result. In this module, both inputs and result + * are 16 bits or less, so either int or short multiply will work. + */ + +#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/16). + */ + +GLOBAL(void) +jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * Note results are scaled up by sqrt(8) compared to a true IDCT; + * furthermore, we scale the results by 2**PASS1_BITS. + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Add range center and fudge factor for final descale and range-limit. */ + z2 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) RIGHT_SHIFT(z2, PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#ifdef IDCT_SCALING_SUPPORTED + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 7x7 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/14). + */ + +GLOBAL(void) +jpeg_idct_7x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp13 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp13 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp13 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) RIGHT_SHIFT(tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp13 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp13 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x6 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/12). + */ + +GLOBAL(void) +jpeg_idct_6x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) (tmp11 + tmp1); + wsptr[6*4] = (int) (tmp11 - tmp1); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 5x5 output block. + * + * Optimized algorithm with 5 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/10). + */ + +GLOBAL(void) +jpeg_idct_5x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp12 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp12 <<= CONST_BITS; + tmp0 = (INT32) wsptr[2]; + tmp1 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 4x4 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + +GLOBAL(void) +jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[4*0] = (int) (tmp10 + tmp0); + wsptr[4*3] = (int) (tmp10 - tmp0); + wsptr[4*1] = (int) (tmp12 + tmp2); + wsptr[4*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x3 output block. + * + * Optimized algorithm with 2 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/6). + */ + +GLOBAL(void) +jpeg_idct_3x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 2x2 output block. + * + * Multiplication-less algorithm. + */ + +GLOBAL(void) +jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* Pass 1: process columns from input. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Column 0 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + /* Add range center and fudge factor for final descale and range-limit. */ + tmp4 += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + tmp0 = tmp4 + tmp5; + tmp2 = tmp4 - tmp5; + + /* Column 1 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0+1], quantptr[DCTSIZE*0+1]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1+1], quantptr[DCTSIZE*1+1]); + + tmp1 = tmp4 + tmp5; + tmp3 = tmp4 - tmp5; + + /* Pass 2: process 2 rows, store into output array. */ + + /* Row 0 */ + outptr = output_buf[0] + output_col; + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; + + /* Row 1 */ + outptr = output_buf[1] + output_col; + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp2 + tmp3, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp2 - tmp3, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 1x1 output block. + * + * We hardly need an inverse DCT routine for this: just take the + * average pixel value, which is one-eighth of the DC coefficient. + */ + +GLOBAL(void) +jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM dcval; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* 1x1 is trivial: just take the DC coefficient divided by 8. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + dcval = DEQUANTIZE(coef_block[0], quantptr[0]); + /* Add range center and fudge factor for descale and range-limit. */ + dcval += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + output_buf[0][output_col] = + range_limit[(int) IRIGHT_SHIFT(dcval, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 9x9 output block. + * + * Optimized algorithm with 10 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/18). + */ + +GLOBAL(void) +jpeg_idct_9x9 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*9]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp13 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp13 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 9 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 9; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x10 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/20). + */ + +GLOBAL(void) +jpeg_idct_10x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) (tmp22 + tmp12); + wsptr[8*7] = (int) (tmp22 - tmp12); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing an 11x11 output block. + * + * Optimized algorithm with 24 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/22). + */ + +GLOBAL(void) +jpeg_idct_11x11 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*11]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 11 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 11; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp10 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp10 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x12 output block. + * + * Optimized algorithm with 15 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/24). + */ + +GLOBAL(void) +jpeg_idct_12x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 13x13 output block. + * + * Optimized algorithm with 29 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/26). + */ + +GLOBAL(void) +jpeg_idct_13x13 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*13]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 13 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 13; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x14 output block. + * + * Optimized algorithm with 20 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/28). + */ + +GLOBAL(void) +jpeg_idct_14x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) (tmp23 + tmp13); + wsptr[8*10] = (int) (tmp23 - tmp13); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 15x15 output block. + * + * Optimized algorithm with 22 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/30). + */ + +GLOBAL(void) +jpeg_idct_15x15 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*15]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z4 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 15 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 15; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z4 = (INT32) wsptr[5]; + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = (INT32) wsptr[7]; + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x16 output block. + * + * Optimized algorithm with 28 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/32). + */ + +GLOBAL(void) +jpeg_idct_16x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 16 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x8 output block. + * + * 8-point IDCT in pass 1 (columns), 16-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_16x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * Note results are scaled up by sqrt(8) compared to a true IDCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x7 output block. + * + * 7-point IDCT in pass 1 (columns), 14-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_14x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp23 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp23 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp23 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x6 output block. + * + * 6-point IDCT in pass 1 (columns), 12-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_12x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp12 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = RIGHT_SHIFT(tmp10 - tmp20 - tmp20, CONST_BITS-PASS1_BITS); + tmp20 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) (tmp21 + tmp11); + wsptr[8*4] = (int) (tmp21 - tmp11); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x5 output block. + * + * 5-point IDCT in pass 1 (columns), 10-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_10x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp13 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp14 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp10 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp11 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing an 8x4 output block. + * + * 4-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[8*0] = (int) (tmp10 + tmp0); + wsptr[8*3] = (int) (tmp10 - tmp0); + wsptr[8*1] = (int) (tmp12 + tmp2); + wsptr[8*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z2 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 6x3 output block. + * + * 3-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x2 output block. + * + * 2-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[4*2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + /* Odd part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + wsptr[4*0] = tmp10 + tmp0; + wsptr[4*1] = tmp10 - tmp0; + } + + /* Pass 2: process 2 rows from work array, store into output array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = wsptr[0] + ((((INT32) RANGE_CENTER) << 3) + (ONE << 2)); + tmp2 = wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = wsptr[1]; + z3 = wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x1 output block. + * + * 1-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* Pass 1: empty. */ + + /* Pass 2: process 1 row from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + outptr = output_buf[0] + output_col; + + /* Even part */ + + tmp0 = DEQUANTIZE(coef_block[0], quantptr[0]); + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + /* Odd part */ + + tmp1 = DEQUANTIZE(coef_block[1], quantptr[1]); + + /* Final output stage */ + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing an 8x16 output block. + * + * 16-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z2 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x14 output block. + * + * 14-point IDCT in pass 1 (columns), 7-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_7x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) (tmp23 + tmp13); + wsptr[7*10] = (int) (tmp23 - tmp13); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[7*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp23 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp23 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 6x12 output block. + * + * 12-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[6*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp10 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp10 <<= CONST_BITS; + tmp12 = (INT32) wsptr[4]; + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = tmp10 - tmp20 - tmp20; + tmp20 = (INT32) wsptr[2]; + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 5x10 output block. + * + * 10-point IDCT in pass 1 (columns), 5-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_5x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) (tmp22 + tmp12); + wsptr[5*7] = (int) (tmp22 - tmp12); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[5*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp12 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp12 <<= CONST_BITS; + tmp13 = (INT32) wsptr[2]; + tmp14 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x8 output block. + * + * 8-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * Note results are scaled up by sqrt(8) compared to a true IDCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 4; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[4*0] = dcval; + wsptr[4*1] = dcval; + wsptr[4*2] = dcval; + wsptr[4*3] = dcval; + wsptr[4*4] = dcval; + wsptr[4*5] = dcval; + wsptr[4*6] = dcval; + wsptr[4*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[4*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[4*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 3x6 output block. + * + * 6-point IDCT in pass 1 (columns), 3-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_3x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) (tmp11 + tmp1); + wsptr[3*4] = (int) (tmp11 - tmp1); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[3*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x4 output block. + * + * 4-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[2*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + wsptr[2*0] = tmp10 + tmp0; + wsptr[2*3] = tmp10 - tmp0; + wsptr[2*1] = tmp12 + tmp2; + wsptr[2*2] = tmp12 - tmp2; + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp10 = wsptr[0] + + ((((INT32) RANGE_CENTER) << (CONST_BITS+3)) + + (ONE << (CONST_BITS+2))); + + /* Odd part */ + + tmp0 = wsptr[1]; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 2; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 1x2 output block. + * + * 2-point IDCT in pass 1 (columns), 1-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_1x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* Process 1 column from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Even part */ + + tmp0 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + /* Odd part */ + + tmp1 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + output_buf[0][output_col] = + range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + output_buf[1][output_col] = + range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; +} + +#endif /* IDCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/Jpeg/jinclude.h b/jpeg-9d/jinclude.h similarity index 92% rename from Jpeg/jinclude.h rename to jpeg-9d/jinclude.h index 0a4f151..20ed4ef 100644 --- a/Jpeg/jinclude.h +++ b/jpeg-9d/jinclude.h @@ -2,6 +2,7 @@ * jinclude.h * * Copyright (C) 1991-1994, Thomas G. Lane. + * Modified 2017 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -83,9 +84,14 @@ * The modules that use fread() and fwrite() always invoke them through * these macros. On some systems you may need to twiddle the argument casts. * CAUTION: argument order is different from underlying functions! + * + * Furthermore, macros are provided for fflush() and ferror() in order + * to facilitate adaption by applications using an own FILE class. */ #define JFREAD(file,buf,sizeofbuf) \ ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) #define JFWRITE(file,buf,sizeofbuf) \ ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFFLUSH(file) fflush(file) +#define JFERROR(file) ferror(file) diff --git a/Jpeg/jmemansi.c b/jpeg-9d/jmemansi.c similarity index 100% rename from Jpeg/jmemansi.c rename to jpeg-9d/jmemansi.c diff --git a/Jpeg/jmemdos.c b/jpeg-9d/jmemdos.c similarity index 99% rename from Jpeg/jmemdos.c rename to jpeg-9d/jmemdos.c index d64835d..60b45c6 100644 --- a/Jpeg/jmemdos.c +++ b/jpeg-9d/jmemdos.c @@ -284,7 +284,7 @@ close_file_store (j_common_ptr cinfo, backing_store_ptr info) } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) open_file_store (j_common_ptr cinfo, backing_store_ptr info, long total_bytes_needed) { @@ -410,7 +410,7 @@ close_xms_store (j_common_ptr cinfo, backing_store_ptr info) } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) open_xms_store (j_common_ptr cinfo, backing_store_ptr info, long total_bytes_needed) { @@ -550,7 +550,7 @@ close_ems_store (j_common_ptr cinfo, backing_store_ptr info) } -LOCAL(wxjpeg_boolean) +LOCAL(boolean) open_ems_store (j_common_ptr cinfo, backing_store_ptr info, long total_bytes_needed) { diff --git a/jpeg-9d/jmemdosa.asm b/jpeg-9d/jmemdosa.asm new file mode 100644 index 0000000..ecd4372 --- /dev/null +++ b/jpeg-9d/jmemdosa.asm @@ -0,0 +1,379 @@ +; +; jmemdosa.asm +; +; Copyright (C) 1992, Thomas G. Lane. +; This file is part of the Independent JPEG Group's software. +; For conditions of distribution and use, see the accompanying README file. +; +; This file contains low-level interface routines to support the MS-DOS +; backing store manager (jmemdos.c). Routines are provided to access disk +; files through direct DOS calls, and to access XMS and EMS drivers. +; +; This file should assemble with Microsoft's MASM or any compatible +; assembler (including Borland's Turbo Assembler). If you haven't got +; a compatible assembler, better fall back to jmemansi.c or jmemname.c. +; +; To minimize dependence on the C compiler's register usage conventions, +; we save and restore all 8086 registers, even though most compilers only +; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return +; values, which everybody returns in AX. +; +; Based on code contributed by Ge' Weijers. +; + +JMEMDOSA_TXT segment byte public 'CODE' + + assume cs:JMEMDOSA_TXT + + public _jdos_open + public _jdos_close + public _jdos_seek + public _jdos_read + public _jdos_write + public _jxms_getdriver + public _jxms_calldriver + public _jems_available + public _jems_calldriver + +; +; short far jdos_open (short far * handle, char far * filename) +; +; Create and open a temporary file +; +_jdos_open proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov cx,0 ; normal file attributes + lds dx,dword ptr [bp+10] ; get filename pointer + mov ah,3ch ; create file + int 21h + jc open_err ; if failed, return error code + lds bx,dword ptr [bp+6] ; get handle pointer + mov word ptr [bx],ax ; save the handle + xor ax,ax ; return zero for OK +open_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_open endp + + +; +; short far jdos_close (short handle) +; +; Close the file handle +; +_jdos_close proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov ah,3eh ; close file + int 21h + jc close_err ; if failed, return error code + xor ax,ax ; return zero for OK +close_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_close endp + + +; +; short far jdos_seek (short handle, long offset) +; +; Set file position +; +_jdos_seek proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov dx,word ptr [bp+8] ; LS offset + mov cx,word ptr [bp+10] ; MS offset + mov ax,4200h ; absolute seek + int 21h + jc seek_err ; if failed, return error code + xor ax,ax ; return zero for OK +seek_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_seek endp + + +; +; short far jdos_read (short handle, void far * buffer, unsigned short count) +; +; Read from file +; +_jdos_read proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,3fh ; read file + int 21h + jc read_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes were read + je read_ok + mov ax,1 ; else return 1 for not OK + jmp short read_err +read_ok: xor ax,ax ; return zero for OK +read_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_read endp + + +; +; short far jdos_write (short handle, void far * buffer, unsigned short count) +; +; Write to file +; +_jdos_write proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,40h ; write file + int 21h + jc write_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes written + je write_ok + mov ax,1 ; else return 1 for not OK + jmp short write_err +write_ok: xor ax,ax ; return zero for OK +write_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_write endp + + +; +; void far jxms_getdriver (XMSDRIVER far *) +; +; Get the address of the XMS driver, or NULL if not available +; +_jxms_getdriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,4300h ; call multiplex interrupt with + int 2fh ; a magic cookie, hex 4300 + cmp al,80h ; AL should contain hex 80 + je xmsavail + xor dx,dx ; no XMS driver available + xor ax,ax ; return a nil pointer + jmp short xmsavail_done +xmsavail: mov ax,4310h ; fetch driver address with + int 2fh ; another magic cookie + mov dx,es ; copy address to dx:ax + mov ax,bx +xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value + mov word ptr es:[bx],ax + mov word ptr es:[bx+2],dx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_getdriver endp + + +; +; void far jxms_calldriver (XMSDRIVER, XMScontext far *) +; +; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the XMS call is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jxms_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + call dword ptr [bp+6] ; call the driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_calldriver endp + + +; +; short far jems_available (void) +; +; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs) +; +_jems_available proc far + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,3567h ; get interrupt vector 67h + int 21h + push cs + pop ds + mov di,000ah ; check offs 10 in returned seg + lea si,ASCII_device_name ; against literal string + mov cx,8 + cld + repe cmpsb + jne no_ems + mov ax,1 ; match, it's there + jmp short avail_done +no_ems: xor ax,ax ; it's not there +avail_done: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + ret + +ASCII_device_name db "EMMXXXX0" + +_jems_available endp + + +; +; void far jems_calldriver (EMScontext far *) +; +; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the EMS trap is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jems_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + int 67h ; call the EMS driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jems_calldriver endp + +JMEMDOSA_TXT ends + + end diff --git a/Jpeg/jmemmac.c b/jpeg-9d/jmemmac.c similarity index 100% rename from Jpeg/jmemmac.c rename to jpeg-9d/jmemmac.c diff --git a/Jpeg/jmemmgr.c b/jpeg-9d/jmemmgr.c similarity index 94% rename from Jpeg/jmemmgr.c rename to jpeg-9d/jmemmgr.c index 173d9de..40377de 100644 --- a/Jpeg/jmemmgr.c +++ b/jpeg-9d/jmemmgr.c @@ -2,6 +2,7 @@ * jmemmgr.c * * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2011-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -129,7 +130,7 @@ typedef struct { jvirt_barray_ptr virt_barray_list; /* This counts total space obtained from jpeg_get_small/large */ - long total_space_allocated; + size_t total_space_allocated; /* alloc_sarray and alloc_barray set this value for use by virtual * array routines. @@ -156,9 +157,9 @@ struct jvirt_sarray_control { JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ JDIMENSION cur_start_row; /* first logical row # in the buffer */ JDIMENSION first_undef_row; /* row # of first uninitialized row */ - wxjpeg_boolean pre_zero; /* pre-zero mode requested? */ - wxjpeg_boolean dirty; /* do current buffer contents need written? */ - wxjpeg_boolean b_s_open; /* is backing-store data valid? */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ jvirt_sarray_ptr next; /* link to next virtual sarray control block */ backing_store_info b_s_info; /* System-dependent control info */ }; @@ -172,9 +173,9 @@ struct jvirt_barray_control { JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ JDIMENSION cur_start_row; /* first logical row # in the buffer */ JDIMENSION first_undef_row; /* row # of first uninitialized row */ - wxjpeg_boolean pre_zero; /* pre-zero mode requested? */ - wxjpeg_boolean dirty; /* do current buffer contents need written? */ - wxjpeg_boolean b_s_open; /* is backing-store data valid? */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ jvirt_barray_ptr next; /* link to next virtual barray control block */ backing_store_info b_s_info; /* System-dependent control info */ }; @@ -194,7 +195,7 @@ print_mem_stats (j_common_ptr cinfo, int pool_id) * This is helpful because message parm array can't handle longs. */ fprintf(stderr, "Freeing pool %d, total space = %ld\n", - pool_id, mem->total_space_allocated); + pool_id, (long) mem->total_space_allocated); for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; lhdr_ptr = lhdr_ptr->hdr.next) { @@ -213,7 +214,7 @@ print_mem_stats (j_common_ptr cinfo, int pool_id) #endif /* MEM_STATS */ -LOCAL(void) +LOCAL(noreturn_t) out_of_memory (j_common_ptr cinfo, int which) /* Report an out-of-memory error and stop execution */ /* If we compiled MEM_STATS support, report alloc requests before dying */ @@ -259,11 +260,11 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) { my_mem_ptr mem = (my_mem_ptr) cinfo->mem; small_pool_ptr hdr_ptr, prev_hdr_ptr; - char * data_ptr; size_t odd_bytes, min_request, slop; + char * data_ptr; /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) + if (sizeofobject > (size_t) MAX_ALLOC_CHUNK - SIZEOF(small_pool_hdr)) out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ @@ -292,8 +293,8 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) else slop = extra_pool_slop[pool_id]; /* Don't ask for more than MAX_ALLOC_CHUNK */ - if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) - slop = (size_t) (MAX_ALLOC_CHUNK-min_request); + if (slop > (size_t) MAX_ALLOC_CHUNK - min_request) + slop = (size_t) MAX_ALLOC_CHUNK - min_request; /* Try to get space, if fail reduce slop and try again */ for (;;) { hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); @@ -347,7 +348,7 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) size_t odd_bytes; /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) + if (sizeofobject > (size_t) MAX_ALLOC_CHUNK - SIZEOF(large_pool_hdr)) out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ @@ -403,7 +404,7 @@ alloc_sarray (j_common_ptr cinfo, int pool_id, long ltemp; /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ltemp = (MAX_ALLOC_CHUNK - SIZEOF(large_pool_hdr)) / ((long) samplesperrow * SIZEOF(JSAMPLE)); if (ltemp <= 0) ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); @@ -415,15 +416,14 @@ alloc_sarray (j_common_ptr cinfo, int pool_id, /* Get space for row pointers (small object) */ result = (JSAMPARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JSAMPROW))); + (size_t) numrows * SIZEOF(JSAMPROW)); /* Get the rows themselves (large objects) */ currow = 0; while (currow < numrows) { rowsperchunk = MIN(rowsperchunk, numrows - currow); workspace = (JSAMPROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow - * SIZEOF(JSAMPLE))); + (size_t) rowsperchunk * (size_t) samplesperrow * SIZEOF(JSAMPLE)); for (i = rowsperchunk; i > 0; i--) { result[currow++] = workspace; workspace += samplesperrow; @@ -451,7 +451,7 @@ alloc_barray (j_common_ptr cinfo, int pool_id, long ltemp; /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ltemp = (MAX_ALLOC_CHUNK - SIZEOF(large_pool_hdr)) / ((long) blocksperrow * SIZEOF(JBLOCK)); if (ltemp <= 0) ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); @@ -463,15 +463,14 @@ alloc_barray (j_common_ptr cinfo, int pool_id, /* Get space for row pointers (small object) */ result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JBLOCKROW))); + (size_t) numrows * SIZEOF(JBLOCKROW)); /* Get the rows themselves (large objects) */ currow = 0; while (currow < numrows) { rowsperchunk = MIN(rowsperchunk, numrows - currow); workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow - * SIZEOF(JBLOCK))); + (size_t) rowsperchunk * (size_t) blocksperrow * SIZEOF(JBLOCK)); for (i = rowsperchunk; i > 0; i--) { result[currow++] = workspace; workspace += blocksperrow; @@ -520,7 +519,7 @@ alloc_barray (j_common_ptr cinfo, int pool_id, METHODDEF(jvirt_sarray_ptr) -request_virt_sarray (j_common_ptr cinfo, int pool_id, wxjpeg_boolean pre_zero, +request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, JDIMENSION samplesperrow, JDIMENSION numrows, JDIMENSION maxaccess) /* Request a virtual 2-D sample array */ @@ -550,7 +549,7 @@ request_virt_sarray (j_common_ptr cinfo, int pool_id, wxjpeg_boolean pre_zero, METHODDEF(jvirt_barray_ptr) -request_virt_barray (j_common_ptr cinfo, int pool_id, wxjpeg_boolean pre_zero, +request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, JDIMENSION blocksperrow, JDIMENSION numrows, JDIMENSION maxaccess) /* Request a virtual 2-D coefficient-block array */ @@ -584,8 +583,8 @@ realize_virt_arrays (j_common_ptr cinfo) /* Allocate the in-memory buffers for any unrealized virtual arrays */ { my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - long space_per_minheight, maximum_space, avail_mem; - long minheights, max_minheights; + long bytesperrow, space_per_minheight, maximum_space; + long avail_mem, minheights, max_minheights; jvirt_sarray_ptr sptr; jvirt_barray_ptr bptr; @@ -597,18 +596,16 @@ realize_virt_arrays (j_common_ptr cinfo) maximum_space = 0; for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { if (sptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) sptr->maxaccess * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - maximum_space += (long) sptr->rows_in_array * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + bytesperrow = (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + space_per_minheight += (long) sptr->maxaccess * bytesperrow; + maximum_space += (long) sptr->rows_in_array * bytesperrow; } } for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { if (bptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) bptr->maxaccess * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - maximum_space += (long) bptr->rows_in_array * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); + bytesperrow = (long) bptr->blocksperrow * SIZEOF(JBLOCK); + space_per_minheight += (long) bptr->maxaccess * bytesperrow; + maximum_space += (long) bptr->rows_in_array * bytesperrow; } } @@ -617,7 +614,7 @@ realize_virt_arrays (j_common_ptr cinfo) /* Determine amount of memory to actually use; this is system-dependent. */ avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, - mem->total_space_allocated); + (long) mem->total_space_allocated); /* If the maximum space needed is available, make all the buffers full * height; otherwise parcel it out with the same number of minheights @@ -687,13 +684,13 @@ realize_virt_arrays (j_common_ptr cinfo) LOCAL(void) -do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, wxjpeg_boolean writing) +do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) /* Do backing store read or write of a virtual sample array */ { long bytesperrow, file_offset, byte_count, rows, thisrow, i; bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); - file_offset = ptr->cur_start_row * bytesperrow; + file_offset = (long) ptr->cur_start_row * bytesperrow; /* Loop to read or write each allocation chunk in mem_buffer */ for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { /* One chunk, but check for short chunk at end of buffer */ @@ -720,13 +717,13 @@ do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, wxjpeg_boolean writing) LOCAL(void) -do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, wxjpeg_boolean writing) +do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) /* Do backing store read or write of a virtual coefficient-block array */ { long bytesperrow, file_offset, byte_count, rows, thisrow, i; bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); - file_offset = ptr->cur_start_row * bytesperrow; + file_offset = (long) ptr->cur_start_row * bytesperrow; /* Loop to read or write each allocation chunk in mem_buffer */ for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { /* One chunk, but check for short chunk at end of buffer */ @@ -755,7 +752,7 @@ do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, wxjpeg_boolean writing) METHODDEF(JSAMPARRAY) access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, JDIMENSION start_row, JDIMENSION num_rows, - wxjpeg_boolean writable) + boolean writable) /* Access the part of a virtual sample array starting at start_row */ /* and extending for num_rows rows. writable is true if */ /* caller intends to modify the accessed area. */ @@ -770,7 +767,7 @@ access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, /* Make the desired part of the virtual array accessible */ if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { + end_row > ptr->cur_start_row + ptr->rows_in_mem) { if (! ptr->b_s_open) ERREXIT(cinfo, JERR_VIRTUAL_BUG); /* Flush old buffer contents if necessary */ @@ -821,7 +818,7 @@ access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ end_row -= ptr->cur_start_row; while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); undef_row++; } } else { @@ -840,7 +837,7 @@ access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, METHODDEF(JBLOCKARRAY) access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, JDIMENSION start_row, JDIMENSION num_rows, - wxjpeg_boolean writable) + boolean writable) /* Access the part of a virtual block array starting at start_row */ /* and extending for num_rows rows. writable is true if */ /* caller intends to modify the accessed area. */ @@ -855,7 +852,7 @@ access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, /* Make the desired part of the virtual array accessible */ if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { + end_row > ptr->cur_start_row + ptr->rows_in_mem) { if (! ptr->b_s_open) ERREXIT(cinfo, JERR_VIRTUAL_BUG); /* Flush old buffer contents if necessary */ @@ -906,7 +903,7 @@ access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ end_row -= ptr->cur_start_row; while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); undef_row++; } } else { @@ -1092,7 +1089,7 @@ jinit_memory_mgr (j_common_ptr cinfo) mem->total_space_allocated = SIZEOF(my_memory_mgr); /* Declare ourselves open for business */ - cinfo->mem = & mem->pub; + cinfo->mem = &mem->pub; /* Check for an environment variable JPEGMEM; if found, override the * default max_memory setting from jpeg_mem_init. Note that the diff --git a/Jpeg/jmemname.c b/jpeg-9d/jmemname.c similarity index 100% rename from Jpeg/jmemname.c rename to jpeg-9d/jmemname.c diff --git a/Jpeg/jmemnobs.c b/jpeg-9d/jmemnobs.c similarity index 90% rename from Jpeg/jmemnobs.c rename to jpeg-9d/jmemnobs.c index eb8c337..a364cd8 100644 --- a/Jpeg/jmemnobs.c +++ b/jpeg-9d/jmemnobs.c @@ -2,6 +2,7 @@ * jmemnobs.c * * Copyright (C) 1992-1996, Thomas G. Lane. + * Modified 2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -12,7 +13,7 @@ * This is very portable in the sense that it'll compile on almost anything, * but you'd better have lots of main memory (or virtual memory) if you want * to process big images. - * Note that the max_memory_to_use option is ignored by this implementation. + * Note that the max_memory_to_use option is respected by this implementation. */ #define JPEG_INTERNALS @@ -66,13 +67,16 @@ jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) /* * This routine computes the total memory space available for allocation. - * Here we always say, "we got all you want bud!" */ GLOBAL(long) jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, long max_bytes_needed, long already_allocated) { + if (cinfo->mem->max_memory_to_use) + return cinfo->mem->max_memory_to_use - already_allocated; + + /* Here we say, "we got all you want bud!" */ return max_bytes_needed; } diff --git a/Jpeg/jmemsys.h b/jpeg-9d/jmemsys.h similarity index 100% rename from Jpeg/jmemsys.h rename to jpeg-9d/jmemsys.h diff --git a/Jpeg/jmorecfg.h b/jpeg-9d/jmorecfg.h similarity index 75% rename from Jpeg/jmorecfg.h rename to jpeg-9d/jmorecfg.h index c4a5d33..679d68b 100644 --- a/Jpeg/jmorecfg.h +++ b/jpeg-9d/jmorecfg.h @@ -2,6 +2,7 @@ * jmorecfg.h * * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2013 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -14,13 +15,22 @@ /* * Define BITS_IN_JSAMPLE as either * 8 for 8-bit sample values (the usual setting) + * 9 for 9-bit sample values + * 10 for 10-bit sample values + * 11 for 11-bit sample values * 12 for 12-bit sample values - * Only 8 and 12 are legal data precisions for lossy JPEG according to the - * JPEG standard, and the IJG code does not support anything else! - * We do not support run-time selection of data precision, sorry. + * Only 8, 9, 10, 11, and 12 bits sample data precision are supported for + * full-feature DCT processing. Further depths up to 16-bit may be added + * later for the lossless modes of operation. + * Run-time selection and conversion of data precision will be added later + * and are currently not supported, sorry. + * Exception: The transcoding part (jpegtran) supports all settings in a + * single instance, since it operates on the level of DCT coefficients and + * not sample values. The DCT coefficients are of the same type (16 bits) + * in all cases (see below). */ -#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ +#define BITS_IN_JSAMPLE 8 /* use 8, 9, 10, 11, or 12 */ /* @@ -76,6 +86,48 @@ typedef char JSAMPLE; #endif /* BITS_IN_JSAMPLE == 8 */ +#if BITS_IN_JSAMPLE == 9 +/* JSAMPLE should be the smallest type that will hold the values 0..511. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 511 +#define CENTERJSAMPLE 256 + +#endif /* BITS_IN_JSAMPLE == 9 */ + + +#if BITS_IN_JSAMPLE == 10 +/* JSAMPLE should be the smallest type that will hold the values 0..1023. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 1023 +#define CENTERJSAMPLE 512 + +#endif /* BITS_IN_JSAMPLE == 10 */ + + +#if BITS_IN_JSAMPLE == 11 +/* JSAMPLE should be the smallest type that will hold the values 0..2047. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 2047 +#define CENTERJSAMPLE 1024 + +#endif /* BITS_IN_JSAMPLE == 11 */ + + #if BITS_IN_JSAMPLE == 12 /* JSAMPLE should be the smallest type that will hold the values 0..4095. * On nearly all machines "short" will do nicely. @@ -130,7 +182,6 @@ typedef char JOCTET; */ /* UINT8 must hold at least the values 0..255. */ -#ifndef __WINE_BASETSD_H #ifdef HAVE_UNSIGNED_CHAR typedef unsigned char UINT8; @@ -156,21 +207,17 @@ typedef unsigned int UINT16; typedef short INT16; #endif -#endif /* __WINE_BASETSD_H */ - /* INT32 must hold at least signed 32-bit values. */ -/* - VZ: due to the horrible mess resulting in INT32 being defined in windows.h - for some compilers but not for the other ones, I have globally replace - INT32 with JPEG_INT32 in libjpeg code to avoid the eight level ifdef - which used to be here. The problem is that, of course, now we'll have - conflicts when upgrading to the next libjpeg release -- however - considering their frequency (1 in the last 5 years) it seems that - it is not too high a price to pay for the clean compilation with all - versions of mingw32 and cygwin - */ -typedef long JPEG_INT32; +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */ +#ifndef _BASETSD_H /* MinGW is slightly different */ +#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */ +typedef long INT32; +#endif +#endif +#endif +#endif /* Datatype used for image dimensions. The JPEG standard only supports * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore @@ -191,29 +238,15 @@ typedef unsigned int JDIMENSION; * or code profilers that require it. */ -#if defined(__VISAGECPP__) -#define JPEG_CALLING_CONV _Optlink -#else /* !Visual Age C++ */ -#define JPEG_CALLING_CONV -#endif - -/* We can't declare a static function as extern "C" as we need to do in C++ - * programs, so suppress static in METHODDEF when using C++. - */ -#if defined(__cplusplus) -#define JPEG_METHOD_LINKAGE -#else /* !__cplusplus */ -#define JPEG_METHOD_LINKAGE static -#endif - /* a function called through method pointers: */ -#define METHODDEF(type) JPEG_METHOD_LINKAGE type JPEG_CALLING_CONV +#define METHODDEF(type) static type /* a function used only in its module: */ -#define LOCAL(type) static type JPEG_CALLING_CONV +#define LOCAL(type) static type /* a function referenced thru EXTERNs: */ #define GLOBAL(type) type /* a reference to a GLOBAL function: */ -#define EXTERN(type) extern type JPEG_CALLING_CONV +#define EXTERN(type) extern type + /* This macro is used to declare a "method", that is, a function pointer. * We want to supply prototype parameters if the compiler can cope. @@ -221,33 +254,43 @@ typedef unsigned int JDIMENSION; * Again, you can customize this if you need special linkage keywords. */ -#if defined(__VISAGECPP__) /* need this for /common/imagjpeg.obj but not loclly */ -#ifdef HAVE_PROTOTYPES -#define JMETHOD(type,methodname,arglist) type (_Optlink *methodname) arglist -#else -#define JMETHOD(type,methodname,arglist) type (_Optlink *methodname) () -#endif - -#else - #ifdef HAVE_PROTOTYPES #define JMETHOD(type,methodname,arglist) type (*methodname) arglist #else #define JMETHOD(type,methodname,arglist) type (*methodname) () #endif + +/* The noreturn type identifier is used to declare functions + * which cannot return. + * Compilers can thus create more optimized code and perform + * better checks for warnings and errors. + * Static analyzer tools can make improved inferences about + * execution paths and are prevented from giving false alerts. + * + * Unfortunately, the proposed specifications of corresponding + * extensions in the Dec 2011 ISO C standard revision (C11), + * GCC, MSVC, etc. are not viable. + * Thus we introduce a user defined type to declare noreturn + * functions at least for clarity. A proper compiler would + * have a suitable noreturn type to match in place of void. + */ + +#ifndef HAVE_NORETURN_T +typedef void noreturn_t; #endif + /* Here is the pseudo-keyword for declaring pointers that must be "far" * on 80x86 machines. Most of the specialized coding for 80x86 is handled * by just saying "FAR *" where such a pointer is needed. In a few places * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. */ +#ifndef FAR #ifdef NEED_FAR_POINTERS #define FAR far #else -#ifndef FAR #define FAR #endif #endif @@ -260,35 +303,20 @@ typedef unsigned int JDIMENSION; * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. */ -#if 0 #ifndef HAVE_BOOLEAN +#if defined FALSE || defined TRUE || defined QGLOBAL_H +/* Qt3 defines FALSE and TRUE as "const" variables in qglobal.h */ typedef int boolean; -#endif -#endif - -/* - * Notes about boolean above: - * - * The main conflict we see is with the Windows headers of some compilers that - * have a different definition of boolean. Therefore boolean has been replaced - * with wxjpeg_boolean throughout the jpeg sources. The alternative would have - * been to make the definition here the same as the Windows definition. It's - * not enough to just define HAVE_BOOLEAN when using the jpeg library, the - * definition of boolean must match when the jpeg library is compiled too. - * - * System jepg libs won't have this type, of course, so to use test - * HAVE_WXJPEG_BOOLEAN and fall back to boolean when not defined. - */ - -typedef int wxjpeg_boolean; -#define HAVE_WXJPEG_BOOLEAN - #ifndef FALSE /* in case these macros already exist */ #define FALSE 0 /* values of boolean */ #endif #ifndef TRUE #define TRUE 1 #endif +#else +typedef enum { FALSE = 0, TRUE = 1 } boolean; +#endif +#endif /* @@ -313,8 +341,6 @@ typedef int wxjpeg_boolean; * (You may HAVE to do that if your compiler doesn't like null source files.) */ -/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */ - /* Capability options common to encoder and decoder: */ #define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ @@ -323,15 +349,17 @@ typedef int wxjpeg_boolean; /* Encoder capability options: */ -#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ #define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ #define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/ #define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ -/* Note: if you selected 12-bit data precision, it is dangerous to turn off - * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit - * precision, so jchuff.c normally uses entropy optimization to compute - * usable tables for higher precision. If you don't want to do optimization, - * you'll have to supply different default Huffman tables. +/* Note: if you selected more than 8-bit data precision, it is dangerous to + * turn off ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only + * good for 8-bit precision, so arithmetic coding is recommended for higher + * precision. The Huffman encoder normally uses entropy optimization to + * compute usable tables for higher precision. Otherwise, you'll have to + * supply different default Huffman tables. * The exact same statements apply for progressive JPEG: the default tables * don't work for progressive mode. (This may get fixed, however.) */ @@ -339,12 +367,12 @@ typedef int wxjpeg_boolean; /* Decoder capability options: */ -#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ #define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ #define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? (Requires DCT_ISLOW)*/ #define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ #define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ -#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ #undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ #define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ #define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ @@ -361,9 +389,7 @@ typedef int wxjpeg_boolean; * the offsets will also change the order in which colormap data is organized. * RESTRICTIONS: * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. - * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not - * useful if you are using JPEG color spaces other than YCbCr or grayscale. - * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE * is not 3 (they don't understand about dummy color components!). So you * can't use color quantization if you change that value. */ diff --git a/jpeg-9d/jpeg-9d.vcxproj b/jpeg-9d/jpeg-9d.vcxproj new file mode 100644 index 0000000..0233aea --- /dev/null +++ b/jpeg-9d/jpeg-9d.vcxproj @@ -0,0 +1,227 @@ + + + + + Debug + Win32 + + + Debug + x64 + + + Release + Win32 + + + Release + x64 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1} + Win32Proj + jpeg + 10.0.18362.0 + jpeg-9d + + + + StaticLibrary + false + true + Unicode + v142 + + + StaticLibrary + false + true + Unicode + v142 + + + StaticLibrary + false + true + Unicode + v142 + + + StaticLibrary + false + true + Unicode + v142 + + + + + + + + + + + + + + + + + + + $(SolutionDir)$(Configuration)\ + $(Configuration)\ + + + $(SolutionDir)$(Configuration)\ + $(Configuration)\ + + + $(SolutionDir)$(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + $(SolutionDir)$(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + + Level3 + + + Full + true + true + WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions);_CRT_SECURE_NO_WARNINGS + false + false + stdcpp14 + + + Windows + true + true + true + + + + + Level3 + + + Full + true + true + WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions);_CRT_SECURE_NO_WARNINGS + false + false + stdcpp14 + + + Windows + true + true + true + + + + + Level3 + NotUsing + Full + true + false + NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS + true + true + + + Windows + true + true + true + + + + + Level3 + NotUsing + Full + true + false + NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS + true + true + + + Windows + true + true + true + + + + + + \ No newline at end of file diff --git a/jpeg-9d/jpeg-9d.vcxproj.filters b/jpeg-9d/jpeg-9d.vcxproj.filters new file mode 100644 index 0000000..81dcb9d --- /dev/null +++ b/jpeg-9d/jpeg-9d.vcxproj.filters @@ -0,0 +1,180 @@ + + + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + Quelldateien + + + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + Headerdateien + + + + + {b71ce90a-42e1-4742-aabd-4d75b3d0d011} + + + {05b2bf93-ee7a-4454-a719-e9c022ba9156} + + + \ No newline at end of file diff --git a/jpeg-9d/jpeg.sln b/jpeg-9d/jpeg.sln new file mode 100644 index 0000000..2f5bc9d --- /dev/null +++ b/jpeg-9d/jpeg.sln @@ -0,0 +1,25 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 15 +VisualStudioVersion = 15.0.28307.329 +MinimumVisualStudioVersion = 10.0.40219.1 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|x64.ActiveCfg = Release|x64 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|x64.Build.0 = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + SolutionGuid = {F3829CB8-BF87-4A30-B5D3-E3ADB548485D} + EndGlobalSection +EndGlobal diff --git a/jpeg-9d/jpeg.vcxproj.filters b/jpeg-9d/jpeg.vcxproj.filters new file mode 100644 index 0000000..5accea2 --- /dev/null +++ b/jpeg-9d/jpeg.vcxproj.filters @@ -0,0 +1,186 @@ + + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/Jpeg/jpegint.h b/jpeg-9d/jpegint.h similarity index 76% rename from Jpeg/jpegint.h rename to jpeg-9d/jpegint.h index 7928ae3..52c708d 100644 --- a/Jpeg/jpegint.h +++ b/jpeg-9d/jpegint.h @@ -2,6 +2,7 @@ * jpegint.h * * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -48,8 +49,8 @@ struct jpeg_comp_master { JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); /* State variables made visible to other modules */ - wxjpeg_boolean call_pass_startup; /* True if pass_startup must be called */ - wxjpeg_boolean is_last_pass; /* True during last pass */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ }; /* Main buffer control (downsampled-data buffer) */ @@ -75,7 +76,7 @@ struct jpeg_c_prep_controller { /* Coefficient buffer control */ struct jpeg_c_coef_controller { JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(wxjpeg_boolean, compress_data, (j_compress_ptr cinfo, + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, JSAMPIMAGE input_buf)); }; @@ -95,24 +96,26 @@ struct jpeg_downsampler { JSAMPIMAGE output_buf, JDIMENSION out_row_group_index)); - wxjpeg_boolean need_context_rows; /* TRUE if need rows above & below */ + boolean need_context_rows; /* TRUE if need rows above & below */ }; /* Forward DCT (also controls coefficient quantization) */ +typedef JMETHOD(void, forward_DCT_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); + struct jpeg_forward_dct { JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - /* perhaps this should be an array??? */ - JMETHOD(void, forward_DCT, (j_compress_ptr cinfo, - jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks)); + /* It is useful to allow each component to have a separate FDCT method. */ + forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; }; /* Entropy encoding */ struct jpeg_entropy_encoder { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, wxjpeg_boolean gather_statistics)); - JMETHOD(wxjpeg_boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); }; @@ -139,7 +142,7 @@ struct jpeg_decomp_master { JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); /* State variables made visible to other modules */ - wxjpeg_boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ }; /* Input control module */ @@ -150,8 +153,8 @@ struct jpeg_input_controller { JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); /* State variables made visible to other modules */ - wxjpeg_boolean has_multiple_scans; /* True if file has multiple scans */ - wxjpeg_boolean eoi_reached; /* True when EOI has been consumed */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ }; /* Main buffer control (downsampled-data buffer) */ @@ -164,15 +167,7 @@ struct jpeg_d_main_controller { /* Coefficient buffer control */ struct jpeg_d_coef_controller { -#if defined(__VISAGECPP__) - /* the start input pass in jdcoeft must have a different name than the - // one in jdtrans under VisualAge or else we get a dup symbol error - */ - JMETHOD(void, start_input_pass2, (j_decompress_ptr cinfo)); -#else JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); -#endif - JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, @@ -207,8 +202,8 @@ struct jpeg_marker_reader { /* State of marker reader --- nominally internal, but applications * supplying COM or APPn handlers might like to know the state. */ - wxjpeg_boolean saw_SOI; /* found SOI? */ - wxjpeg_boolean saw_SOF; /* found SOF? */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ int next_restart_num; /* next restart number expected (0-7) */ unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ }; @@ -216,12 +211,8 @@ struct jpeg_marker_reader { /* Entropy decoding */ struct jpeg_entropy_decoder { JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(wxjpeg_boolean, decode_mcu, (j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); - - /* This is here to share code between baseline and progressive decoders; */ - /* other modules probably should not use it */ - wxjpeg_boolean insufficient_data; /* set TRUE after emitting warning */ + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); }; /* Inverse DCT (also performs dequantization) */ @@ -247,7 +238,7 @@ struct jpeg_upsampler { JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); - wxjpeg_boolean need_context_rows; /* TRUE if need rows above & below */ + boolean need_context_rows; /* TRUE if need rows above & below */ }; /* Colorspace conversion */ @@ -260,7 +251,7 @@ struct jpeg_color_deconverter { /* Color quantization or color precision reduction */ struct jpeg_color_quantizer { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, wxjpeg_boolean is_pre_scan)); + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows)); @@ -269,6 +260,19 @@ struct jpeg_color_quantizer { }; +/* Definition of range extension bits for decompression processes. + * See the comments with prepare_range_limit_table (in jdmaster.c) + * for more info. + * The recommended default value for normal applications is 2. + * Applications with special requirements may use a different value. + * For example, Ghostscript wants to use 3 for proper handling of + * wacky images with oversize coefficient values. + */ + +#define RANGE_BITS 2 +#define RANGE_CENTER (CENTERJSAMPLE << RANGE_BITS) + + /* Miscellaneous useful macros */ #undef MAX @@ -288,16 +292,23 @@ struct jpeg_color_quantizer { */ #ifdef RIGHT_SHIFT_IS_UNSIGNED -#define SHIFT_TEMPS JPEG_INT32 shift_temp; +#define SHIFT_TEMPS INT32 shift_temp; #define RIGHT_SHIFT(x,shft) \ ((shift_temp = (x)) < 0 ? \ - (shift_temp >> (shft)) | ((~((JPEG_INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ (shift_temp >> (shft))) #else #define SHIFT_TEMPS #define RIGHT_SHIFT(x,shft) ((x) >> (shft)) #endif +/* Descale and correctly round an INT32 value that's scaled by N bits. + * We assume RIGHT_SHIFT rounds towards minus infinity, so adding + * the fudge factor is correct for either sign of X. + */ + +#define DESCALE(x,n) RIGHT_SHIFT((x) + ((INT32) 1 << ((n)-1)), n) + /* Short forms of external names for systems with brain-damaged linkers. */ @@ -311,7 +322,7 @@ struct jpeg_color_quantizer { #define jinit_downsampler jIDownsampler #define jinit_forward_dct jIFDCT #define jinit_huff_encoder jIHEncoder -#define jinit_phuff_encoder jIPHEncoder +#define jinit_arith_encoder jIAEncoder #define jinit_marker_writer jIMWriter #define jinit_master_decompress jIDMaster #define jinit_d_main_controller jIDMainC @@ -320,7 +331,7 @@ struct jpeg_color_quantizer { #define jinit_input_controller jIInCtlr #define jinit_marker_reader jIMReader #define jinit_huff_decoder jIHDecoder -#define jinit_phuff_decoder jIPHDecoder +#define jinit_arith_decoder jIADecoder #define jinit_inverse_dct jIIDCT #define jinit_upsampler jIUpsampler #define jinit_color_deconverter jIDColor @@ -330,42 +341,69 @@ struct jpeg_color_quantizer { #define jinit_memory_mgr jIMemMgr #define jdiv_round_up jDivRound #define jround_up jRound +#define jzero_far jZeroFar #define jcopy_sample_rows jCopySamples #define jcopy_block_row jCopyBlocks -#define jzero_far jZeroFar #define jpeg_zigzag_order jZIGTable #define jpeg_natural_order jZAGTable +#define jpeg_natural_order7 jZAG7Table +#define jpeg_natural_order6 jZAG6Table +#define jpeg_natural_order5 jZAG5Table +#define jpeg_natural_order4 jZAG4Table +#define jpeg_natural_order3 jZAG3Table +#define jpeg_natural_order2 jZAG2Table +#define jpeg_aritab jAriTab #endif /* NEED_SHORT_EXTERNAL_NAMES */ +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines in jutils.c do it the hard way. + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ +#define FMEMZERO(target,size) MEMZERO(target,size) +#else /* 80x86 case */ +#ifdef USE_FMEM +#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#else +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +#define FMEMZERO(target,size) jzero_far(target, size) +#endif +#endif + + /* Compression module initialization routines */ EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, - wxjpeg_boolean transcode_only)); + boolean transcode_only)); EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, - wxjpeg_boolean need_full_buffer)); + boolean need_full_buffer)); EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, - wxjpeg_boolean need_full_buffer)); + boolean need_full_buffer)); EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, - wxjpeg_boolean need_full_buffer)); + boolean need_full_buffer)); EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); /* Decompression module initialization routines */ EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, - wxjpeg_boolean need_full_buffer)); + boolean need_full_buffer)); EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, - wxjpeg_boolean need_full_buffer)); + boolean need_full_buffer)); EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, - wxjpeg_boolean need_full_buffer)); + boolean need_full_buffer)); EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); @@ -383,12 +421,20 @@ EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, int num_rows, JDIMENSION num_cols)); EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, JDIMENSION num_blocks)); -EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); /* Constant tables in jutils.c */ #if 0 /* This table is not actually needed in v6a */ extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ #endif extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ +extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ +extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ +extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ +extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ +extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ +extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ + +/* Arithmetic coding probability estimation tables in jaricom.c */ +extern const INT32 jpeg_aritab[]; /* Suppress undefined-structure complaints if necessary. */ diff --git a/Jpeg/jpeglib.h b/jpeg-9d/jpeglib.h similarity index 84% rename from Jpeg/jpeglib.h rename to jpeg-9d/jpeglib.h index 4677c7e..591a2cb 100644 --- a/Jpeg/jpeglib.h +++ b/jpeg-9d/jpeglib.h @@ -2,6 +2,7 @@ * jpeglib.h * * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -26,19 +27,27 @@ #include "jmorecfg.h" /* seldom changed options */ -/* Version ID for the JPEG library. - * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version IDs for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 90". */ -#define JPEG_LIB_VERSION 62 /* Version 6b */ +#define JPEG_LIB_VERSION 90 /* Compatibility version 9.0 */ +#define JPEG_LIB_VERSION_MAJOR 9 +#define JPEG_LIB_VERSION_MINOR 4 /* Various constants determining the sizes of things. - * All of these are specified by the JPEG standard, so don't change them - * if you want to be compatible. + * All of these are specified by the JPEG standard, + * so don't change them if you want to be compatible. */ -#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE 8 /* The basic DCT block is 8x8 coefficients */ #define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ #define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ #define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ @@ -91,7 +100,7 @@ typedef struct { * You could suppress output of a table by setting this to TRUE. * (See jpeg_suppress_tables for an example.) */ - wxjpeg_boolean sent_table; /* TRUE when table has been output */ + boolean sent_table; /* TRUE when table has been output */ } JQUANT_TBL; @@ -107,7 +116,7 @@ typedef struct { * You could suppress output of a table by setting this to TRUE. * (See jpeg_suppress_tables for an example.) */ - wxjpeg_boolean sent_table; /* TRUE when table has been output */ + boolean sent_table; /* TRUE when table has been output */ } JHUFF_TBL; @@ -138,33 +147,38 @@ typedef struct { */ JDIMENSION width_in_blocks; JDIMENSION height_in_blocks; - /* Size of a DCT block in samples. Always DCTSIZE for compression. - * For decompression this is the size of the output from one DCT block, - * reflecting any scaling we choose to apply during the IDCT step. - * Values of 1,2,4,8 are likely to be supported. Note that different - * components may receive different IDCT scalings. + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. */ - int DCT_scaled_size; + int DCT_h_scaled_size; + int DCT_v_scaled_size; /* The downsampled dimensions are the component's actual, unpadded number - * of samples at the main buffer (preprocessing/compression interface), thus - * downsampled_width = ceil(image_width * Hi/Hmax) - * and similarly for height. For decompression, IDCT scaling is included, so - * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = + * ceil(image_width * Hi/Hmax * DCT_h_scaled_size/block_size) + * and similarly for height. */ JDIMENSION downsampled_width; /* actual width in samples */ JDIMENSION downsampled_height; /* actual height in samples */ - /* This flag is used only for decompression. In cases where some of the - * components will be ignored (eg grayscale output from YCbCr image), - * we can skip most computations for the unused components. + /* For decompression, in cases where some of the components will be + * ignored (eg grayscale output from YCbCr image), we can skip most + * computations for the unused components. + * For compression, some of the components will need further quantization + * scale by factor of 2 after DCT (eg BG_YCC output from normal RGB input). + * The field is first set TRUE for decompression, FALSE for compression + * in initial_setup, and then adapted in color conversion setup. */ - wxjpeg_boolean component_needed; /* do we need the value of this component? */ + boolean component_needed; /* These values are computed before starting a scan of the component. */ /* The decompressor output side may not use these variables. */ int MCU_width; /* number of blocks per MCU, horizontally */ int MCU_height; /* number of blocks per MCU, vertically */ int MCU_blocks; /* MCU_width * MCU_height */ - int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ int last_col_width; /* # of non-dummy blocks across in last MCU */ int last_row_height; /* # of non-dummy blocks down in last MCU */ @@ -206,12 +220,21 @@ struct jpeg_marker_struct { typedef enum { JCS_UNKNOWN, /* error/unspecified */ JCS_GRAYSCALE, /* monochrome */ - JCS_RGB, /* red/green/blue */ - JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_RGB, /* red/green/blue, standard RGB (sRGB) */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV), standard YCC */ JCS_CMYK, /* C/M/Y/K */ - JCS_YCCK /* Y/Cb/Cr/K */ + JCS_YCCK, /* Y/Cb/Cr/K */ + JCS_BG_RGB, /* big gamut red/green/blue, bg-sRGB */ + JCS_BG_YCC /* big gamut Y/Cb/Cr, bg-sYCC */ } J_COLOR_SPACE; +/* Supported color transforms. */ + +typedef enum { + JCT_NONE = 0, + JCT_SUBTRACT_GREEN = 1 +} J_COLOR_TRANSFORM; + /* DCT/IDCT algorithm options. */ typedef enum { @@ -243,7 +266,7 @@ typedef enum { struct jpeg_memory_mgr * mem; /* Memory manager module */\ struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ void * client_data; /* Available for use by application */\ - wxjpeg_boolean is_decompressor; /* So common code can tell which is which */\ + boolean is_decompressor; /* So common code can tell which is which */\ int global_state /* For checking call sequence validity */ /* Routines that are to be used by both halves of the library are declared @@ -291,6 +314,17 @@ struct jpeg_compress_struct { * helper routines to simplify changing parameters. */ + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + int data_precision; /* bits of precision in image data */ int num_components; /* # of color components in JPEG image */ @@ -300,7 +334,10 @@ struct jpeg_compress_struct { /* comp_info[i] describes component that appears i'th in SOF */ JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; @@ -317,10 +354,11 @@ struct jpeg_compress_struct { * set num_scans and scan_info to point to an array of scan definitions. */ - wxjpeg_boolean raw_data_in; /* TRUE=caller supplies downsampled data */ - wxjpeg_boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - wxjpeg_boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ - wxjpeg_boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ int smoothing_factor; /* 1..100, or 0 for no input smoothing */ J_DCT_METHOD dct_method; /* DCT algorithm selector */ @@ -334,7 +372,7 @@ struct jpeg_compress_struct { /* Parameters controlling emission of special markers. */ - wxjpeg_boolean write_JFIF_header; /* should a JFIF marker be written? */ + boolean write_JFIF_header; /* should a JFIF marker be written? */ UINT8 JFIF_major_version; /* What to write for the JFIF version number */ UINT8 JFIF_minor_version; /* These three values are not used by the JPEG code, merely copied */ @@ -344,7 +382,10 @@ struct jpeg_compress_struct { UINT8 density_unit; /* JFIF code for pixel size units */ UINT16 X_density; /* Horizontal pixel density */ UINT16 Y_density; /* Vertical pixel density */ - wxjpeg_boolean write_Adobe_marker; /* should an Adobe marker be written? */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier, writes LSE marker if nonzero */ /* State variable: index of next scanline to be written to * jpeg_write_scanlines(). Application may use this to control its @@ -360,15 +401,18 @@ struct jpeg_compress_struct { /* * These fields are computed during compression startup */ - wxjpeg_boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ int max_h_samp_factor; /* largest h_samp_factor */ int max_v_samp_factor; /* largest v_samp_factor */ + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ /* The coefficient controller receives data in units of MCU rows as defined * for fully interleaved scans (whether the JPEG file is interleaved or not). - * There are v_samp_factor * DCTSIZE sample rows of each component in an - * "iMCU" (interleaved MCU) row. + * There are v_samp_factor * DCT_v_scaled_size sample rows of each component + * in an "iMCU" (interleaved MCU) row. */ /* @@ -389,6 +433,10 @@ struct jpeg_compress_struct { int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + /* * Links to compression subobjects (methods and private variables of modules) */ @@ -433,22 +481,22 @@ struct jpeg_decompress_struct { double output_gamma; /* image gamma wanted in output */ - wxjpeg_boolean buffered_image; /* TRUE=multiple output passes */ - wxjpeg_boolean raw_data_out; /* TRUE=downsampled data wanted */ + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ J_DCT_METHOD dct_method; /* IDCT algorithm selector */ - wxjpeg_boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ - wxjpeg_boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ - wxjpeg_boolean quantize_colors; /* TRUE=colormapped output wanted */ + boolean quantize_colors; /* TRUE=colormapped output wanted */ /* the following are ignored if not quantize_colors: */ J_DITHER_MODE dither_mode; /* type of color dithering to use */ - wxjpeg_boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ int desired_number_of_colors; /* max # colors to use in created colormap */ /* these are significant only in buffered-image mode: */ - wxjpeg_boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ - wxjpeg_boolean enable_external_quant;/* enable future use of external colormap */ - wxjpeg_boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ /* Description of actual output image that will be returned to application. * These fields are computed by jpeg_start_decompress(). @@ -535,8 +583,9 @@ struct jpeg_decompress_struct { jpeg_component_info * comp_info; /* comp_info[i] describes component that appears i'th in SOF */ - wxjpeg_boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ - wxjpeg_boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ @@ -547,17 +596,20 @@ struct jpeg_decompress_struct { /* These fields record data obtained from optional markers recognized by * the JPEG library. */ - wxjpeg_boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ UINT8 JFIF_major_version; /* JFIF version number */ UINT8 JFIF_minor_version; UINT8 density_unit; /* JFIF code for pixel size units */ UINT16 X_density; /* Horizontal pixel density */ UINT16 Y_density; /* Vertical pixel density */ - wxjpeg_boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ UINT8 Adobe_transform; /* Color transform code from Adobe marker */ - wxjpeg_boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier derived from LSE marker, otherwise zero */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ /* Aside from the specific data retained from APPn markers known to the * library, the uninterpreted contents of any or all APPn and COM markers @@ -575,7 +627,8 @@ struct jpeg_decompress_struct { int max_h_samp_factor; /* largest h_samp_factor */ int max_v_samp_factor; /* largest v_samp_factor */ - int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ /* The coefficient controller's input and output progress is measured in @@ -583,7 +636,7 @@ struct jpeg_decompress_struct { * in fully interleaved JPEG scans, but are used whether the scan is * interleaved or not. We define an iMCU row as v_samp_factor DCT block * rows of each component. Therefore, the IDCT output contains - * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. + * v_samp_factor * DCT_v_scaled_size sample rows of a component per iMCU row. */ JSAMPLE * sample_range_limit; /* table for fast range-limiting */ @@ -607,6 +660,12 @@ struct jpeg_decompress_struct { int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + /* This field is shared between entropy decoder and marker parser. * It is either zero or the code of a JPEG marker that has been * read from the data source, but has not yet been processed. @@ -642,7 +701,7 @@ struct jpeg_decompress_struct { struct jpeg_error_mgr { /* Error exit handler: does not return to caller */ - JMETHOD(void, error_exit, (j_common_ptr cinfo)); + JMETHOD(noreturn_t, error_exit, (j_common_ptr cinfo)); /* Conditionally emit a trace or warning message */ JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); /* Routine that actually outputs a trace or error message */ @@ -715,7 +774,7 @@ struct jpeg_destination_mgr { size_t free_in_buffer; /* # of byte spaces remaining in buffer */ JMETHOD(void, init_destination, (j_compress_ptr cinfo)); - JMETHOD(wxjpeg_boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); JMETHOD(void, term_destination, (j_compress_ptr cinfo)); }; @@ -727,9 +786,9 @@ struct jpeg_source_mgr { size_t bytes_in_buffer; /* # of bytes remaining in buffer */ JMETHOD(void, init_source, (j_decompress_ptr cinfo)); - JMETHOD(wxjpeg_boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); - JMETHOD(wxjpeg_boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); JMETHOD(void, term_source, (j_decompress_ptr cinfo)); }; @@ -767,13 +826,13 @@ struct jpeg_memory_mgr { JDIMENSION numrows)); JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, int pool_id, - wxjpeg_boolean pre_zero, + boolean pre_zero, JDIMENSION samplesperrow, JDIMENSION numrows, JDIMENSION maxaccess)); JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, int pool_id, - wxjpeg_boolean pre_zero, + boolean pre_zero, JDIMENSION blocksperrow, JDIMENSION numrows, JDIMENSION maxaccess)); @@ -782,12 +841,12 @@ struct jpeg_memory_mgr { jvirt_sarray_ptr ptr, JDIMENSION start_row, JDIMENSION num_rows, - wxjpeg_boolean writable)); + boolean writable)); JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, jvirt_barray_ptr ptr, JDIMENSION start_row, JDIMENSION num_rows, - wxjpeg_boolean writable)); + boolean writable)); JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); JMETHOD(void, self_destruct, (j_common_ptr cinfo)); @@ -806,7 +865,7 @@ struct jpeg_memory_mgr { /* Routine signature for application-supplied marker processing methods. * Need not pass marker code since it is stored in cinfo->unread_marker. */ -typedef JMETHOD(wxjpeg_boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); /* Declarations for routines called by application. @@ -824,7 +883,7 @@ typedef JMETHOD(wxjpeg_boolean, jpeg_marker_parser_method, (j_decompress_ptr cin /* Short forms of external names for systems with brain-damaged linkers. * We shorten external names to be unique in the first six letters, which * is good enough for all known systems. - * (If your compiler itself needs names to be unique in less than 15 + * (If your compiler itself needs names to be unique in less than 15 * characters, you are out of luck. Get a better compiler.) */ @@ -836,20 +895,25 @@ typedef JMETHOD(wxjpeg_boolean, jpeg_marker_parser_method, (j_decompress_ptr cin #define jpeg_destroy_decompress jDestDecompress #define jpeg_stdio_dest jStdDest #define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc #define jpeg_set_defaults jSetDefaults #define jpeg_set_colorspace jSetColorspace #define jpeg_default_colorspace jDefColorspace #define jpeg_set_quality jSetQuality #define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables #define jpeg_add_quant_table jAddQuantTable #define jpeg_quality_scaling jQualityScaling #define jpeg_simple_progression jSimProgress #define jpeg_suppress_tables jSuppressTables #define jpeg_alloc_quant_table jAlcQTable #define jpeg_alloc_huff_table jAlcHTable +#define jpeg_std_huff_table jStdHTable #define jpeg_start_compress jStrtCompress #define jpeg_write_scanlines jWrtScanlines #define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions #define jpeg_write_raw_data jWrtRawData #define jpeg_write_marker jWrtMarker #define jpeg_write_m_header jWrtMHeader @@ -866,6 +930,7 @@ typedef JMETHOD(wxjpeg_boolean, jpeg_marker_parser_method, (j_decompress_ptr cin #define jpeg_input_complete jInComplete #define jpeg_new_colormap jNewCMap #define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions #define jpeg_calc_output_dimensions jCalcDimensions #define jpeg_save_markers jSaveMarkers #define jpeg_set_marker_processor jSetMarker @@ -910,6 +975,14 @@ EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + size_t * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + const unsigned char * inbuffer, + size_t insize)); + /* Default parameter setup for compression */ EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); /* Compression parameter setup aids */ @@ -917,35 +990,42 @@ EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, J_COLOR_SPACE colorspace)); EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, - wxjpeg_boolean force_baseline)); + boolean force_baseline)); EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, int scale_factor, - wxjpeg_boolean force_baseline)); + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, const unsigned int *basic_table, int scale_factor, - wxjpeg_boolean force_baseline)); + boolean force_baseline)); EXTERN(int) jpeg_quality_scaling JPP((int quality)); EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, - wxjpeg_boolean suppress)); + boolean suppress)); EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_std_huff_table JPP((j_common_ptr cinfo, + boolean isDC, int tblno)); /* Main entry points for compression */ EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, - wxjpeg_boolean write_all_tables)); + boolean write_all_tables)); EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, JSAMPARRAY scanlines, JDIMENSION num_lines)); EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + /* Replaces jpeg_write_scanlines when writing raw downsampled data. */ EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, JSAMPIMAGE data, JDIMENSION num_lines)); -/* Write a special marker. See libjpeg.doc concerning safe usage. */ +/* Write a special marker. See libjpeg.txt concerning safe usage. */ EXTERN(void) jpeg_write_marker JPP((j_compress_ptr cinfo, int marker, const JOCTET * dataptr, unsigned int datalen)); @@ -960,7 +1040,7 @@ EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); /* Decompression startup: read start of JPEG datastream to see what's there */ EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, - wxjpeg_boolean require_image)); + boolean require_image)); /* Return value is one of: */ #define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ #define JPEG_HEADER_OK 1 /* Found valid image datastream */ @@ -972,11 +1052,11 @@ EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, */ /* Main entry points for decompression */ -EXTERN(wxjpeg_boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, JSAMPARRAY scanlines, JDIMENSION max_lines)); -EXTERN(wxjpeg_boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); /* Replaces jpeg_read_scanlines when reading raw downsampled data. */ EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, @@ -984,11 +1064,11 @@ EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, JDIMENSION max_lines)); /* Additional entry points for buffered-image mode. */ -EXTERN(wxjpeg_boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); -EXTERN(wxjpeg_boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, int scan_number)); -EXTERN(wxjpeg_boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); -EXTERN(wxjpeg_boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); /* Return value is one of: */ @@ -999,6 +1079,7 @@ EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); #define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ /* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); /* Control saving of COM and APPn markers into marker_list. */ @@ -1034,7 +1115,7 @@ EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); /* Default restart-marker-resync procedure for use by data source modules */ -EXTERN(wxjpeg_boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, int desired)); @@ -1093,4 +1174,10 @@ struct jpeg_color_quantizer { long dummy; }; #include "jerror.h" /* fetch error codes too */ #endif +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + #endif /* JPEGLIB_H */ diff --git a/Jpeg/jpegtran.1 b/jpeg-9d/jpegtran.1 similarity index 62% rename from Jpeg/jpegtran.1 rename to jpeg-9d/jpegtran.1 index 6de18e2..7929afd 100644 --- a/Jpeg/jpegtran.1 +++ b/jpeg-9d/jpegtran.1 @@ -1,4 +1,4 @@ -.TH JPEGTRAN 1 "3 August 1997" +.TH JPEGTRAN 1 "28 August 2019" .SH NAME jpegtran \- lossless transformation of JPEG files .SH SYNOPSIS @@ -19,6 +19,10 @@ for example from baseline JPEG to progressive JPEG or vice versa. It can also perform some rearrangements of the image data, for example turning an image from landscape to portrait format by rotation. .PP +For EXIF files and JPEG files containing Exif data, you may prefer to use +.B exiftran +instead. +.PP .B jpegtran works by rearranging the compressed data (DCT coefficients), without ever fully decoding the image. Therefore, its transformations are lossless: @@ -28,7 +32,11 @@ followed by .B cjpeg to accomplish the same conversion. But by the same token, .B jpegtran -cannot perform lossy operations such as changing the image quality. +cannot perform lossy operations such as changing the image quality. However, +while the image data is losslessly transformed, metadata can be removed. See +the +.B \-copy +option for specifics. .PP .B jpegtran reads the named JPEG/JFIF file, or the standard input if no file is @@ -60,6 +68,9 @@ Create progressive JPEG file. Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is attached to the number. .TP +.B \-arithmetic +Use arithmetic coding. +.TP .BI \-scans " file" Use the scan script given in the specified text file. .PP @@ -91,12 +102,12 @@ Transpose image (across UL-to-LR axis). .TP .B \-transverse Transverse transpose (across UR-to-LL axis). -.PP +.IP The transpose transformation has no restrictions regarding image dimensions. The other transformations operate rather oddly if the image dimensions are not a multiple of the iMCU size (usually 8 or 16 pixels), because they can only transform complete blocks of DCT coefficient data in the desired way. -.PP +.IP .BR jpegtran 's default behavior when transforming an odd-size image is designed to preserve exact reversibility and mathematical consistency of the @@ -108,7 +119,7 @@ able to flip all columns. The other transforms can be built up as sequences of transpose and flip operations; for consistency, their actions on edge pixels are defined to be the same as the end result of the corresponding transpose-and-flip sequence. -.PP +.IP For practical use, you may prefer to discard any untransformable edge pixels rather than having a strange-looking strip along the right and/or bottom edges of a transformed image. To do this, add the @@ -117,7 +128,7 @@ switch: .TP .B \-trim Drop non-transformable edge blocks. -.PP +.IP Obviously, a transformation with .B \-trim is not reversible, so strictly speaking @@ -130,12 +141,77 @@ trims only the bottom edge, but followed by .B \-rot 180 -trim trims both edges. +.IP +If you are only interested in perfect transformation, add the +.B \-perfect +switch: +.TP +.B \-perfect +Fails with an error if the transformation is not perfect. +.IP +For example you may want to do +.IP +.B (jpegtran \-rot 90 -perfect +.I foo.jpg +.B || djpeg +.I foo.jpg +.B | pnmflip \-r90 | cjpeg) +.IP +to do a perfect rotation if available or an approximated one if not. .PP -Another not-strictly-lossless transformation switch is: +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the +region dimensions to keep the lower right crop corner unchanged. (Thus, the +output image covers at least the requested region, but may cover more.) +The adjustment of the region dimensions may be optionally disabled by +attaching an 'f' character ("force") to the width or height number. +.PP +The image can be losslessly cropped by giving the switch: +.TP +.B \-crop WxH+X+Y +Crop to a rectangular subarea of width W, height H starting at point X,Y. +.PP +Crop extension: The width or height parameters can be made larger than the +source image. In this case the extra area is filled in with zero (neutral +gray). A larger width parameter has two more options: Attaching an 'f' +character ("flatten") to the width number will fill in the extra area with +the DC of the adjacent block, instead of gray out. Attaching an 'r' +character ("reflect") to the width number will fill in the extra area with +repeated reflections of the source region, instead of gray out. +.PP +A complementary lossless-wipe option is provided to discard (gray out) data +inside a given image region while losslessly preserving what is outside: +.TP +.B \-wipe WxH+X+Y +Wipe (gray out) a rectangular subarea of width W, height H starting at point +X,Y. +.PP +Attaching an 'f' character ("flatten") to the width number will fill the +region with the average of adjacent blocks, instead of gray out. In case +the wipe region and outside area form two horizontally adjacent rectangles, +attaching an 'r' character ("reflect") to the width number will fill the +region with repeated reflections of the outside area, instead of gray out. +.PP +Another option is lossless-drop, which replaces data at a given image +position by another image: +.TP +.B \-drop +X+Y filename +Drop another image +.PP +Both source images must have the same subsampling values. It is best if +they also have the same quantization, otherwise quantization adaption occurs. +The trim option can be used with the drop option to requantize the drop file +to the source file. +.PP +Other not-strictly-lossless transformation switches are: .TP .B \-grayscale Force grayscale output. -.PP +.IP This option discards the chrominance channels if the input image is YCbCr (ie, a standard color JPEG), resulting in a grayscale JPEG file. The luminance channel is preserved exactly, so this is a better method of reducing @@ -144,6 +220,19 @@ is particularly handy for fixing a monochrome picture that was mistakenly encoded as a color JPEG. (In such a case, the space savings from getting rid of the near-empty chroma channels won't be large; but the decoding time for a grayscale JPEG is substantially less than that for a color JPEG.) +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. +.IP +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. .PP .B jpegtran also recognizes these switches that control what to do with "extra" markers, @@ -151,17 +240,18 @@ such as comment blocks: .TP .B \-copy none Copy no extra markers from source file. This setting suppresses all -comments and other excess baggage present in the source file. +comments and other metadata in the source file. .TP .B \-copy comments Copy only comment markers. This setting copies comments from the source file, -but discards any other inessential data. +but discards any other metadata. .TP .B \-copy all -Copy all extra markers. This setting preserves miscellaneous markers -found in the source file, such as JFIF thumbnails and Photoshop settings. -In some files these extra markers can be sizable. -.PP +Copy all extra markers. This setting preserves metadata +found in the source file, such as JFIF thumbnails, Exif data, and Photoshop +settings. In some files these extra markers can be sizable. Note that this +option will copy thumbnails as-is; they will not be transformed. +.IP The default behavior is .BR "\-copy comments" . (Note: in IJG releases v6 and v6a, @@ -227,11 +317,11 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. .SH AUTHOR Independent JPEG Group .SH BUGS -Arithmetic coding is not supported for legal reasons. -.PP The transform options can't transform odd-size images perfectly. Use .B \-trim -if you don't like the results without it. +or +.B \-perfect +if you don't like the results. .PP The entire image is read into memory and then written out again, even in cases where this isn't really necessary. Expect swapping on large images, diff --git a/Jpeg/jpegtran.c b/jpeg-9d/jpegtran.c similarity index 69% rename from Jpeg/jpegtran.c rename to jpeg-9d/jpegtran.c index c81a626..bfaa8ac 100644 --- a/Jpeg/jpegtran.c +++ b/jpeg-9d/jpegtran.c @@ -1,14 +1,14 @@ /* * jpegtran.c * - * Copyright (C) 1995-1997, Thomas G. Lane. + * Copyright (C) 1995-2019, Thomas G. Lane, Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains a command-line user interface for JPEG transcoding. - * It is very similar to cjpeg.c, but provides lossless transcoding between - * different JPEG file formats. It also provides some lossless and sort-of- - * lossless transformations of JPEG data. + * It is very similar to cjpeg.c, and partly to djpeg.c, but provides + * lossless transcoding between different JPEG file formats. It also + * provides some lossless and sort-of-lossless transformations of JPEG data. */ #include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ @@ -37,6 +37,8 @@ static const char * progname; /* program name for error messages */ static char * outfilename; /* for -outfile switch */ +static char * dropfilename; /* for -drop switch */ +static char * scaleoption; /* -scale switch */ static JCOPY_OPTION copyoption; /* -copy switch */ static jpeg_transform_info transformoption; /* image transformation options */ @@ -62,24 +64,32 @@ usage (void) #ifdef C_PROGRESSIVE_SUPPORTED fprintf(stderr, " -progressive Create progressive JPEG file\n"); #endif -#if TRANSFORMS_SUPPORTED fprintf(stderr, "Switches for modifying the image:\n"); - fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); +#if TRANSFORMS_SUPPORTED + fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n"); + fprintf(stderr, " -drop +X+Y filename Drop another image\n"); fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n"); + fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); + fprintf(stderr, " -perfect Fail if there is non-transformable edge blocks\n"); fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n"); +#endif + fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); +#if TRANSFORMS_SUPPORTED fprintf(stderr, " -transpose Transpose image\n"); fprintf(stderr, " -transverse Transverse transpose image\n"); fprintf(stderr, " -trim Drop non-transformable edge blocks\n"); -#endif /* TRANSFORMS_SUPPORTED */ + fprintf(stderr, " with -drop: Requantize drop file to source file\n"); + fprintf(stderr, " -wipe WxH+X+Y Wipe (gray out) a rectangular subarea\n"); +#endif fprintf(stderr, "Switches for advanced users:\n"); +#ifdef C_ARITH_CODING_SUPPORTED + fprintf(stderr, " -arithmetic Use arithmetic coding\n"); +#endif fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); fprintf(stderr, " -outfile name Specify name for output file\n"); fprintf(stderr, " -verbose or -debug Emit debug output\n"); fprintf(stderr, "Switches for wizards:\n"); -#ifdef C_ARITH_CODING_SUPPORTED - fprintf(stderr, " -arithmetic Use arithmetic coding\n"); -#endif #ifdef C_MULTISCAN_FILES_SUPPORTED fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); #endif @@ -112,7 +122,7 @@ select_transform (JXFORM_CODE transform) LOCAL(int) parse_switches (j_compress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, wxjpeg_boolean for_real) + int last_file_arg_seen, boolean for_real) /* Parse optional switches. * Returns argv[] index of first file-name argument (== argc if none). * Any file names with indexes <= last_file_arg_seen are ignored; @@ -124,16 +134,19 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv, { int argn; char * arg; - wxjpeg_boolean simple_progressive; + boolean simple_progressive; char * scansarg = NULL; /* saves -scans parm if any */ /* Set up default JPEG parameters. */ simple_progressive = FALSE; outfilename = NULL; + scaleoption = NULL; copyoption = JCOPYOPT_DEFAULT; transformoption.transform = JXFORM_NONE; + transformoption.perfect = FALSE; transformoption.trim = FALSE; transformoption.force_grayscale = FALSE; + transformoption.crop = FALSE; cinfo->err->trace_level = 0; /* Scan command line options, adjust parameters */ @@ -160,7 +173,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv, exit(EXIT_FAILURE); #endif - } else if (keymatch(arg, "copy", 1)) { + } else if (keymatch(arg, "copy", 2)) { /* Select which extra markers to copy. */ if (++argn >= argc) /* advance to next argument */ usage(); @@ -173,10 +186,45 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv, } else usage(); + } else if (keymatch(arg, "crop", 2)) { + /* Perform lossless cropping. */ +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (transformoption.crop /* reject multiple crop/drop/wipe requests */ || + ! jtransform_parse_crop_spec(&transformoption, argv[argn])) { + fprintf(stderr, "%s: bogus -crop argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + + } else if (keymatch(arg, "drop", 2)) { +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (transformoption.crop /* reject multiple crop/drop/wipe requests */ || + ! jtransform_parse_crop_spec(&transformoption, argv[argn]) || + transformoption.crop_width_set != JCROP_UNSET || + transformoption.crop_height_set != JCROP_UNSET) { + fprintf(stderr, "%s: bogus -drop argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } + if (++argn >= argc) /* advance to next argument */ + usage(); + dropfilename = argv[argn]; + select_transform(JXFORM_DROP); +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { /* Enable debug printouts. */ /* On first -d, print version identification */ - static wxjpeg_boolean printed_version = FALSE; + static boolean printed_version = FALSE; if (! printed_version) { fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n", @@ -233,7 +281,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv, usage(); outfilename = argv[argn]; /* save it away for later use */ - } else if (keymatch(arg, "progressive", 1)) { + } else if (keymatch(arg, "perfect", 2)) { + /* Fail if there is any partial edge MCUs that the transform can't + * handle. */ + transformoption.perfect = TRUE; + + } else if (keymatch(arg, "progressive", 2)) { /* Select simple progressive mode. */ #ifdef C_PROGRESSIVE_SUPPORTED simple_progressive = TRUE; @@ -276,6 +329,13 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv, else usage(); + } else if (keymatch(arg, "scale", 4)) { + /* Scale the output image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + scaleoption = argv[argn]; + /* We must postpone processing until decompression startup. */ + } else if (keymatch(arg, "scans", 1)) { /* Set scan script. */ #ifdef C_MULTISCAN_FILES_SUPPORTED @@ -301,6 +361,21 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv, /* Trim off any partial edge MCUs that the transform can't handle. */ transformoption.trim = TRUE; + } else if (keymatch(arg, "wipe", 1)) { +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (transformoption.crop /* reject multiple crop/drop/wipe requests */ || + ! jtransform_parse_crop_spec(&transformoption, argv[argn])) { + fprintf(stderr, "%s: bogus -wipe argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } + select_transform(JXFORM_WIPE); +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + } else { usage(); /* bogus switch */ } @@ -334,16 +409,24 @@ int main (int argc, char **argv) { struct jpeg_decompress_struct srcinfo; + struct jpeg_error_mgr jsrcerr; +#if TRANSFORMS_SUPPORTED + struct jpeg_decompress_struct dropinfo; + struct jpeg_error_mgr jdroperr; + FILE * drop_file; +#endif struct jpeg_compress_struct dstinfo; - struct jpeg_error_mgr jsrcerr, jdsterr; + struct jpeg_error_mgr jdsterr; #ifdef PROGRESS_REPORT struct cdjpeg_progress_mgr progress; #endif jvirt_barray_ptr * src_coef_arrays; jvirt_barray_ptr * dst_coef_arrays; int file_index; - FILE * input_file; - FILE * output_file; + /* We assume all-in-memory processing and can therefore use only a + * single file pointer for sequential input and output operation. + */ + FILE * fp; /* On Mac, fetch a command line. */ #ifdef USE_CCOMMAND @@ -373,7 +456,7 @@ main (int argc, char **argv) * values read here are mostly ignored; we will rescan the switches after * opening the input file. Also note that most of the switches affect the * destination JPEG object, so we parse into that and then copy over what - * needs to affects the source too. + * needs to affect the source too. */ file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE); @@ -406,32 +489,36 @@ main (int argc, char **argv) /* Open the input file. */ if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]); exit(EXIT_FAILURE); } } else { /* default input file is stdin */ - input_file = read_stdin(); + fp = read_stdin(); } - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); +#if TRANSFORMS_SUPPORTED + /* Open the drop file. */ + if (dropfilename != NULL) { + if ((drop_file = fopen(dropfilename, READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for reading\n", progname, dropfilename); exit(EXIT_FAILURE); } + dropinfo.err = jpeg_std_error(&jdroperr); + jpeg_create_decompress(&dropinfo); + jpeg_stdio_src(&dropinfo, drop_file); } else { - /* default output file is stdout */ - output_file = write_stdout(); + drop_file = NULL; } +#endif #ifdef PROGRESS_REPORT start_progress_monitor((j_common_ptr) &dstinfo, &progress); #endif /* Specify data source for decompression */ - jpeg_stdio_src(&srcinfo, input_file); + jpeg_stdio_src(&srcinfo, fp); /* Enable saving of extra markers that we want to copy */ jcopy_markers_setup(&srcinfo, copyoption); @@ -439,16 +526,44 @@ main (int argc, char **argv) /* Read file header */ (void) jpeg_read_header(&srcinfo, TRUE); + /* Adjust default decompression parameters */ + if (scaleoption != NULL) + if (sscanf(scaleoption, "%u/%u", + &srcinfo.scale_num, &srcinfo.scale_denom) < 1) + usage(); + +#if TRANSFORMS_SUPPORTED + if (dropfilename != NULL) { + (void) jpeg_read_header(&dropinfo, TRUE); + transformoption.crop_width = dropinfo.image_width; + transformoption.crop_width_set = JCROP_POS; + transformoption.crop_height = dropinfo.image_height; + transformoption.crop_height_set = JCROP_POS; + transformoption.drop_ptr = &dropinfo; + } +#endif + /* Any space needed by a transform option must be requested before * jpeg_read_coefficients so that memory allocation will be done right. */ #if TRANSFORMS_SUPPORTED - jtransform_request_workspace(&srcinfo, &transformoption); + /* Fail right away if -perfect is given and transformation is not perfect. + */ + if (!jtransform_request_workspace(&srcinfo, &transformoption)) { + fprintf(stderr, "%s: transformation is not perfect\n", progname); + exit(EXIT_FAILURE); + } #endif /* Read source file as DCT coefficients */ src_coef_arrays = jpeg_read_coefficients(&srcinfo); +#if TRANSFORMS_SUPPORTED + if (dropfilename != NULL) { + transformoption.drop_coef_arrays = jpeg_read_coefficients(&dropinfo); + } +#endif + /* Initialize destination compression parameters from source values */ jpeg_copy_critical_parameters(&srcinfo, &dstinfo); @@ -463,11 +578,32 @@ main (int argc, char **argv) dst_coef_arrays = src_coef_arrays; #endif + /* Close input file, if we opened it. + * Note: we assume that jpeg_read_coefficients consumed all input + * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will + * only consume more while (! cinfo->inputctl->eoi_reached). + * We cannot call jpeg_finish_decompress here since we still need the + * virtual arrays allocated from the source object for processing. + */ + if (fp != stdin) + fclose(fp); + + /* Open the output file. */ + if (outfilename != NULL) { + if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + fp = write_stdout(); + } + /* Adjust default compression parameters by re-parsing the options */ file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); /* Specify data destination for compression */ - jpeg_stdio_dest(&dstinfo, output_file); + jpeg_stdio_dest(&dstinfo, fp); /* Start compressor (note no image data is actually written here) */ jpeg_write_coefficients(&dstinfo, dst_coef_arrays); @@ -485,20 +621,34 @@ main (int argc, char **argv) /* Finish compression and release memory */ jpeg_finish_compress(&dstinfo); jpeg_destroy_compress(&dstinfo); +#if TRANSFORMS_SUPPORTED + if (dropfilename != NULL) { + (void) jpeg_finish_decompress(&dropinfo); + jpeg_destroy_decompress(&dropinfo); + } +#endif (void) jpeg_finish_decompress(&srcinfo); jpeg_destroy_decompress(&srcinfo); - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); + /* Close output file, if we opened it */ + if (fp != stdout) + fclose(fp); +#if TRANSFORMS_SUPPORTED + if (drop_file != NULL) + fclose(drop_file); +#endif #ifdef PROGRESS_REPORT end_progress_monitor((j_common_ptr) &dstinfo); #endif /* All done. */ - exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ +#if TRANSFORMS_SUPPORTED + if (dropfilename != NULL) + exit(jsrcerr.num_warnings + jdroperr.num_warnings + + jdsterr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); +#endif + exit(jsrcerr.num_warnings + jdsterr.num_warnings ? + EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ } diff --git a/jpeg-9d/jpegtran.vcxproj b/jpeg-9d/jpegtran.vcxproj new file mode 100644 index 0000000..ec18503 --- /dev/null +++ b/jpeg-9d/jpegtran.vcxproj @@ -0,0 +1,115 @@ + + + + + Release + Win32 + + + Release + x64 + + + + {025BAC50-51B5-4FFE-BC47-3F920BB4047E} + Win32Proj + jpegtran + 10.0 + + + + Application + false + true + Unicode + v142 + + + Application + false + true + Unicode + v142 + + + + + + + + + + + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + $(Configuration)\$(Platform)\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + $(Configuration)\$(Platform)\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/jpeg-9d/jpegtran.vcxproj.filters b/jpeg-9d/jpegtran.vcxproj.filters new file mode 100644 index 0000000..e772792 --- /dev/null +++ b/jpeg-9d/jpegtran.vcxproj.filters @@ -0,0 +1,63 @@ + + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/Jpeg/jquant1.c b/jpeg-9d/jquant1.c similarity index 97% rename from Jpeg/jquant1.c rename to jpeg-9d/jquant1.c index f6d221f..9d11f70 100644 --- a/Jpeg/jquant1.c +++ b/jpeg-9d/jquant1.c @@ -2,6 +2,7 @@ * jquant1.c * * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -128,8 +129,8 @@ static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { typedef INT16 FSERROR; /* 16 bits should be enough */ typedef int LOCFSERROR; /* use 'int' for calculation temps */ #else -typedef JPEG_INT32 FSERROR; /* may need more than 16 bits */ -typedef JPEG_INT32 LOCFSERROR; /* be sure calculation temps are big enough */ +typedef INT32 FSERROR; /* may need more than 16 bits */ +typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ #endif typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ @@ -151,7 +152,7 @@ typedef struct { * premultiplied as described above. Since colormap indexes must fit into * JSAMPLEs, the entries of this array will too. */ - wxjpeg_boolean is_padded; /* is the colorindex padded for odither? */ + boolean is_padded; /* is the colorindex padded for odither? */ int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ @@ -161,7 +162,7 @@ typedef struct { /* Variables for Floyd-Steinberg dithering */ FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ - wxjpeg_boolean on_odd_row; /* flag to remember which row we are on */ + boolean on_odd_row; /* flag to remember which row we are on */ } my_cquantizer; typedef my_cquantizer * my_cquantize_ptr; @@ -191,7 +192,7 @@ select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) int nc = cinfo->out_color_components; /* number of color components */ int max_colors = cinfo->desired_number_of_colors; int total_colors, iroot, i, j; - wxjpeg_boolean changed; + boolean changed; long temp; static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; @@ -251,7 +252,7 @@ output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) * (Forcing the upper and lower values to the limits ensures that * dithering can't produce a color outside the selected gamut.) */ - return (int) (((JPEG_INT32) j * MAXJSAMPLE + maxj/2) / maxj); + return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); } @@ -261,7 +262,7 @@ largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) /* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ { /* Breakpoints are halfway between values returned by output_value */ - return (int) (((JPEG_INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); + return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); } @@ -397,7 +398,7 @@ make_odither_array (j_decompress_ptr cinfo, int ncolors) { ODITHER_MATRIX_PTR odither; int j,k; - JPEG_INT32 num,den; + INT32 num,den; odither = (ODITHER_MATRIX_PTR) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, @@ -407,10 +408,10 @@ make_odither_array (j_decompress_ptr cinfo, int ncolors) * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). * On 16-bit-int machine, be careful to avoid overflow. */ - den = 2 * ODITHER_CELLS * ((JPEG_INT32) (ncolors - 1)); + den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); for (j = 0; j < ODITHER_SIZE; j++) { for (k = 0; k < ODITHER_SIZE; k++) { - num = ((JPEG_INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) + num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) * MAXJSAMPLE; /* Ensure round towards zero despite C's lack of consistency * about rounding negative values in integer division... @@ -530,8 +531,8 @@ quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, for (row = 0; row < num_rows; row++) { /* Initialize output values to 0 so can process components separately */ - jzero_far((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); + FMEMZERO((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); row_index = cquantize->row_index; for (ci = 0; ci < nc; ci++) { input_ptr = input_buf[row] + ci; @@ -635,8 +636,8 @@ quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, for (row = 0; row < num_rows; row++) { /* Initialize output values to 0 so can process components separately */ - jzero_far((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); + FMEMZERO((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); for (ci = 0; ci < nc; ci++) { input_ptr = input_buf[row] + ci; output_ptr = output_buf[row]; @@ -738,7 +739,7 @@ alloc_fs_workspace (j_decompress_ptr cinfo) */ METHODDEF(void) -start_pass_1_quant (j_decompress_ptr cinfo, wxjpeg_boolean is_pre_scan) +start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) { my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; size_t arraysize; @@ -781,7 +782,7 @@ start_pass_1_quant (j_decompress_ptr cinfo, wxjpeg_boolean is_pre_scan) /* Initialize the propagated errors to zero. */ arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); for (i = 0; i < cinfo->out_color_components; i++) - jzero_far((void FAR *) cquantize->fserrors[i], arraysize); + FMEMZERO((void FAR *) cquantize->fserrors[i], arraysize); break; default: ERREXIT(cinfo, JERR_NOT_COMPILED); diff --git a/Jpeg/jquant2.c b/jpeg-9d/jquant2.c similarity index 97% rename from Jpeg/jquant2.c rename to jpeg-9d/jquant2.c index b9c66a3..38fc2af 100644 --- a/Jpeg/jquant2.c +++ b/jpeg-9d/jquant2.c @@ -2,6 +2,7 @@ * jquant2.c * * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -181,8 +182,8 @@ typedef hist2d * hist3d; /* type for top-level pointer */ typedef INT16 FSERROR; /* 16 bits should be enough */ typedef int LOCFSERROR; /* use 'int' for calculation temps */ #else -typedef JPEG_INT32 FSERROR; /* may need more than 16 bits */ -typedef JPEG_INT32 LOCFSERROR; /* be sure calculation temps are big enough */ +typedef INT32 FSERROR; /* may need more than 16 bits */ +typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ #endif typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ @@ -200,11 +201,11 @@ typedef struct { /* Variables for accumulating image statistics */ hist3d histogram; /* pointer to the histogram */ - wxjpeg_boolean needs_zeroed; /* TRUE if next pass must zero histogram */ + boolean needs_zeroed; /* TRUE if next pass must zero histogram */ /* Variables for Floyd-Steinberg dithering */ FSERRPTR fserrors; /* accumulated errors */ - wxjpeg_boolean on_odd_row; /* flag to remember which row we are on */ + boolean on_odd_row; /* flag to remember which row we are on */ int * error_limiter; /* table for clamping the applied error */ } my_cquantizer; @@ -261,7 +262,7 @@ typedef struct { int c1min, c1max; int c2min, c2max; /* The volume (actually 2-norm) of the box */ - JPEG_INT32 volume; + INT32 volume; /* The number of nonzero histogram cells within this box */ long colorcount; } box; @@ -296,7 +297,7 @@ find_biggest_volume (boxptr boxlist, int numboxes) { register boxptr boxp; register int i; - register JPEG_INT32 maxv = 0; + register INT32 maxv = 0; boxptr which = NULL; for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { @@ -319,7 +320,7 @@ update_box (j_decompress_ptr cinfo, boxptr boxp) histptr histp; int c0,c1,c2; int c0min,c0max,c1min,c1max,c2min,c2max; - JPEG_INT32 dist0,dist1,dist2; + INT32 dist0,dist1,dist2; long ccount; c0min = boxp->c0min; c0max = boxp->c0max; @@ -658,8 +659,8 @@ find_nearby_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, int maxc0, maxc1, maxc2; int centerc0, centerc1, centerc2; int i, x, ncolors; - JPEG_INT32 minmaxdist, min_dist, max_dist, tdist; - JPEG_INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ + INT32 minmaxdist, min_dist, max_dist, tdist; + INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ /* Compute true coordinates of update box's upper corner and center. * Actually we compute the coordinates of the center of the upper-corner @@ -783,15 +784,15 @@ find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, { int ic0, ic1, ic2; int i, icolor; - register JPEG_INT32 * bptr; /* pointer into bestdist[] array */ + register INT32 * bptr; /* pointer into bestdist[] array */ JSAMPLE * cptr; /* pointer into bestcolor[] array */ - JPEG_INT32 dist0, dist1; /* initial distance values */ - register JPEG_INT32 dist2; /* current distance in inner loop */ - JPEG_INT32 xx0, xx1; /* distance increments */ - register JPEG_INT32 xx2; - JPEG_INT32 inc0, inc1, inc2; /* initial values for increments */ + INT32 dist0, dist1; /* initial distance values */ + register INT32 dist2; /* current distance in inner loop */ + INT32 xx0, xx1; /* distance increments */ + register INT32 xx2; + INT32 inc0, inc1, inc2; /* initial values for increments */ /* This array holds the distance to the nearest-so-far color for each cell */ - JPEG_INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; /* Initialize best-distance for each cell of the update box */ bptr = bestdist; @@ -1164,7 +1165,7 @@ finish_pass2 (j_decompress_ptr cinfo) */ METHODDEF(void) -start_pass_2_quant (j_decompress_ptr cinfo, wxjpeg_boolean is_pre_scan) +start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) { my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; hist3d histogram = cquantize->histogram; @@ -1203,7 +1204,7 @@ start_pass_2_quant (j_decompress_ptr cinfo, wxjpeg_boolean is_pre_scan) cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); /* Initialize the propagated errors to zero. */ - jzero_far((void FAR *) cquantize->fserrors, arraysize); + FMEMZERO((void FAR *) cquantize->fserrors, arraysize); /* Make the error-limit table if we didn't already. */ if (cquantize->error_limiter == NULL) init_error_limit(cinfo); @@ -1214,8 +1215,8 @@ start_pass_2_quant (j_decompress_ptr cinfo, wxjpeg_boolean is_pre_scan) /* Zero the histogram or inverse color map, if necessary */ if (cquantize->needs_zeroed) { for (i = 0; i < HIST_C0_ELEMS; i++) { - jzero_far((void FAR *) histogram[i], - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + FMEMZERO((void FAR *) histogram[i], + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); } cquantize->needs_zeroed = FALSE; } diff --git a/Jpeg/jutils.c b/jpeg-9d/jutils.c similarity index 71% rename from Jpeg/jutils.c rename to jpeg-9d/jutils.c index d18a955..1e2dfb0 100644 --- a/Jpeg/jutils.c +++ b/jpeg-9d/jutils.c @@ -2,6 +2,7 @@ * jutils.c * * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -63,6 +64,57 @@ const int jpeg_natural_order[DCTSIZE2+16] = { 63, 63, 63, 63, 63, 63, 63, 63 }; +const int jpeg_natural_order7[7*7+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 14, 21, 28, 35, + 42, 49, 50, 43, 36, 29, 22, 30, + 37, 44, 51, 52, 45, 38, 46, 53, + 54, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order6[6*6+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 41, 34, 27, + 20, 13, 21, 28, 35, 42, 43, 36, + 29, 37, 44, 45, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order5[5*5+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 12, + 19, 26, 33, 34, 27, 20, 28, 35, + 36, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order4[4*4+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 25, 18, 11, 19, 26, 27, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order3[3*3+16] = { + 0, 1, 8, 16, 9, 2, 10, 17, + 18, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order2[2*2+16] = { + 0, 1, 8, 9, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + /* * Arithmetic utilities @@ -96,13 +148,27 @@ jround_up (long a, long b) * is not all that great, because these routines aren't very heavily used.) */ -#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ #define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) -#define FMEMZERO(target,size) MEMZERO(target,size) #else /* 80x86 case, define if we can */ #ifdef USE_FMEM #define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) -#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#else +/* This function is for use by the FMEMZERO macro defined in jpegint.h. + * Do not call this function directly, use the FMEMZERO macro instead. + */ +GLOBAL(void) +jzero_far (void FAR * target, size_t bytestozero) +/* Zero out a chunk of FAR memory. */ +/* This might be sample-array data, block-array data, or alloc_large data. */ +{ + register char FAR * ptr = (char FAR *) target; + register size_t count; + + for (count = bytestozero; count > 0; count--) { + *ptr++ = 0; + } +} #endif #endif @@ -119,7 +185,7 @@ jcopy_sample_rows (JSAMPARRAY input_array, int source_row, { register JSAMPROW inptr, outptr; #ifdef FMEMCOPY - register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); + register size_t count = (size_t) num_cols * SIZEOF(JSAMPLE); #else register JDIMENSION count; #endif @@ -147,7 +213,7 @@ jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, /* Copy a row of coefficient blocks from one place to another. */ { #ifdef FMEMCOPY - FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); + FMEMCOPY(output_row, input_row, (size_t) num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); #else register JCOEFPTR inptr, outptr; register long count; @@ -159,21 +225,3 @@ jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, } #endif } - - -GLOBAL(void) -jzero_far (void FAR * target, size_t bytestozero) -/* Zero out a chunk of FAR memory. */ -/* This might be sample-array data, block-array data, or alloc_large data. */ -{ -#ifdef FMEMZERO - FMEMZERO(target, bytestozero); -#else - register char FAR * ptr = (char FAR *) target; - register size_t count; - - for (count = bytestozero; count > 0; count--) { - *ptr++ = 0; - } -#endif -} diff --git a/Jpeg/jversion.h b/jpeg-9d/jversion.h similarity index 56% rename from Jpeg/jversion.h rename to jpeg-9d/jversion.h index 6472c58..c9befac 100644 --- a/Jpeg/jversion.h +++ b/jpeg-9d/jversion.h @@ -1,7 +1,7 @@ /* * jversion.h * - * Copyright (C) 1991-1998, Thomas G. Lane. + * Copyright (C) 1991-2020, Thomas G. Lane, Guido Vollbeding. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -9,6 +9,6 @@ */ -#define JVERSION "6b 27-Mar-1998" +#define JVERSION "9d 12-Jan-2020" -#define JCOPYRIGHT "Copyright (C) 1998, Thomas G. Lane" +#define JCOPYRIGHT "Copyright (C) 2020, Thomas G. Lane, Guido Vollbeding" diff --git a/jpeg-9d/libjpeg.map b/jpeg-9d/libjpeg.map new file mode 100644 index 0000000..fa70b1f --- /dev/null +++ b/jpeg-9d/libjpeg.map @@ -0,0 +1,4 @@ +LIBJPEG_9.0 { + global: + *; +}; diff --git a/jpeg-9d/libjpeg.pc.in b/jpeg-9d/libjpeg.pc.in new file mode 100644 index 0000000..d8e738f --- /dev/null +++ b/jpeg-9d/libjpeg.pc.in @@ -0,0 +1,10 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: libjpeg +Description: Reads and writes JPEG files +Version: @JPEG_LIB_VERSION_MAJOR@.@JPEG_LIB_VERSION_MINOR@.0 +Libs: -L${libdir} -ljpeg +Cflags: -I${includedir} diff --git a/jpeg-9d/libjpeg.txt b/jpeg-9d/libjpeg.txt new file mode 100644 index 0000000..546a86e --- /dev/null +++ b/jpeg-9d/libjpeg.txt @@ -0,0 +1,3110 @@ +USING THE IJG JPEG LIBRARY + +Copyright (C) 1994-2019, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file describes how to use the IJG JPEG library within an application +program. Read it if you want to write a program that uses the library. + +The file example.c provides heavily commented skeleton code for calling the +JPEG library. Also see jpeglib.h (the include file to be used by application +programs) for full details about data structures and function parameter lists. +The library source code, of course, is the ultimate reference. + +Note that there have been *major* changes from the application interface +presented by IJG version 4 and earlier versions. The old design had several +inherent limitations, and it had accumulated a lot of cruft as we added +features while trying to minimize application-interface changes. We have +sacrificed backward compatibility in the version 5 rewrite, but we think the +improvements justify this. + + +TABLE OF CONTENTS +----------------- + +Overview: + Functions provided by the library + Outline of typical usage +Basic library usage: + Data formats + Compression details + Decompression details + Mechanics of usage: include files, linking, etc +Advanced features: + Compression parameter selection + Decompression parameter selection + Special color spaces + Error handling + Compressed data handling (source and destination managers) + I/O suspension + Progressive JPEG support + Buffered-image mode + Abbreviated datastreams and multiple images + Special markers + Raw (downsampled) image data + Really raw data: DCT coefficients + Progress monitoring + Memory management + Memory usage + Library compile-time options + Portability considerations + Notes for MS-DOS implementors + +You should read at least the overview and basic usage sections before trying +to program with the library. The sections on advanced features can be read +if and when you need them. + + +OVERVIEW +======== + +Functions provided by the library +--------------------------------- + +The IJG JPEG library provides C code to read and write JPEG-compressed image +files. The surrounding application program receives or supplies image data a +scanline at a time, using a straightforward uncompressed image format. All +details of color conversion and other preprocessing/postprocessing can be +handled by the library. + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. The application indirectly selects use of this code +by specifying the format in which it wishes to supply or receive image data. +For example, if colormapped output is requested, then the decompression +library automatically invokes color quantization. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + +A word about functions *not* provided by the library. We handle a subset of +the ISO JPEG standard; most baseline, extended-sequential, and progressive +JPEG processes are supported. (Our subset includes all features now in common +use.) Unsupported ISO options include: + * Hierarchical storage + * Lossless JPEG + * DNL marker + * Nonintegral subsampling ratios +We support 8-bit to 12-bit data precision, but this is a compile-time choice +rather than a run-time choice; hence it is difficult to use different +precisions in a single application. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, this library is +used by the free LIBTIFF library to support JPEG compression in TIFF.) + + +Outline of typical usage +------------------------ + +The rough outline of a JPEG compression operation is: + + Allocate and initialize a JPEG compression object + Specify the destination for the compressed data (eg, a file) + Set parameters for compression, including image size & colorspace + jpeg_start_compress(...); + while (scan lines remain to be written) + jpeg_write_scanlines(...); + jpeg_finish_compress(...); + Release the JPEG compression object + +A JPEG compression object holds parameters and working state for the JPEG +library. We make creation/destruction of the object separate from starting +or finishing compression of an image; the same object can be re-used for a +series of image compression operations. This makes it easy to re-use the +same parameter settings for a sequence of images. Re-use of a JPEG object +also has important implications for processing abbreviated JPEG datastreams, +as discussed later. + +The image data to be compressed is supplied to jpeg_write_scanlines() from +in-memory buffers. If the application is doing file-to-file compression, +reading image data from the source file is the application's responsibility. +The library emits compressed data by calling a "data destination manager", +which typically will write the data into a file; but the application can +provide its own destination manager to do something else. + +Similarly, the rough outline of a JPEG decompression operation is: + + Allocate and initialize a JPEG decompression object + Specify the source of the compressed data (eg, a file) + Call jpeg_read_header() to obtain image info + Set parameters for decompression + jpeg_start_decompress(...); + while (scan lines remain to be read) + jpeg_read_scanlines(...); + jpeg_finish_decompress(...); + Release the JPEG decompression object + +This is comparable to the compression outline except that reading the +datastream header is a separate step. This is helpful because information +about the image's size, colorspace, etc is available when the application +selects decompression parameters. For example, the application can choose an +output scaling ratio that will fit the image into the available screen size. + +The decompression library obtains compressed data by calling a data source +manager, which typically will read the data from a file; but other behaviors +can be obtained with a custom source manager. Decompressed data is delivered +into in-memory buffers passed to jpeg_read_scanlines(). + +It is possible to abort an incomplete compression or decompression operation +by calling jpeg_abort(); or, if you do not need to retain the JPEG object, +simply release it by calling jpeg_destroy(). + +JPEG compression and decompression objects are two separate struct types. +However, they share some common fields, and certain routines such as +jpeg_destroy() can work on either type of object. + +The JPEG library has no static variables: all state is in the compression +or decompression object. Therefore it is possible to process multiple +compression and decompression operations concurrently, using multiple JPEG +objects. + +Both compression and decompression can be done in an incremental memory-to- +memory fashion, if suitable source/destination managers are used. See the +section on "I/O suspension" for more details. + + +BASIC LIBRARY USAGE +=================== + +Data formats +------------ + +Before diving into procedural details, it is helpful to understand the +image data format that the JPEG library expects or returns. + +The standard input image format is a rectangular array of pixels, with each +pixel having the same number of "component" or "sample" values (color +channels). You must specify how many components there are and the colorspace +interpretation of the components. Most applications will use RGB data +(three components per pixel) or grayscale data (one component per pixel). +PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE. +A remarkable number of people manage to miss this, only to find that their +programs don't work with grayscale JPEG files. + +There is no provision for colormapped input. JPEG files are always full-color +or full grayscale (or sometimes another colorspace such as CMYK). You can +feed in a colormapped image by expanding it to full-color format. However +JPEG often doesn't work very well with source data that has been colormapped, +because of dithering noise. This is discussed in more detail in the JPEG FAQ +and the other references mentioned in the README file. + +Pixels are stored by scanlines, with each scanline running from left to +right. The component values for each pixel are adjacent in the row; for +example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an +array of data type JSAMPLE --- which is typically "unsigned char", unless +you've changed jmorecfg.h. (You can also change the RGB pixel layout, say +to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in +that file before doing so.) + +A 2-D array of pixels is formed by making a list of pointers to the starts of +scanlines; so the scanlines need not be physically adjacent in memory. Even +if you process just one scanline at a time, you must make a one-element +pointer array to conform to this structure. Pointers to JSAMPLE rows are of +type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY. + +The library accepts or supplies one or more complete scanlines per call. +It is not possible to process part of a row at a time. Scanlines are always +processed top-to-bottom. You can process an entire image in one call if you +have it all in memory, but usually it's simplest to process one scanline at +a time. + +For best results, source data values should have the precision specified by +BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress +data that's only 6 bits/channel, you should left-justify each value in a +byte before passing it to the compressor. If you need to compress data +that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 9 to 12. +(See "Library compile-time options", later.) + + +The data format returned by the decompressor is the same in all details, +except that colormapped output is supported. (Again, a JPEG file is never +colormapped. But you can ask the decompressor to perform on-the-fly color +quantization to deliver colormapped output.) If you request colormapped +output then the returned data array contains a single JSAMPLE per pixel; +its value is an index into a color map. The color map is represented as +a 2-D JSAMPARRAY in which each row holds the values of one color component, +that is, colormap[i][j] is the value of the i'th color component for pixel +value (map index) j. Note that since the colormap indexes are stored in +JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE +(ie, at most 256 colors for an 8-bit JPEG library). + + +Compression details +------------------- + +Here we revisit the JPEG compression outline given in the overview. + +1. Allocate and initialize a JPEG compression object. + +A JPEG compression object is a "struct jpeg_compress_struct". (It also has +a bunch of subsidiary structures which are allocated via malloc(), but the +application doesn't control those directly.) This struct can be just a local +variable in the calling routine, if a single routine is going to execute the +whole JPEG compression sequence. Otherwise it can be static or allocated +from malloc(). + +You will also need a structure representing a JPEG error handler. The part +of this that the library cares about is a "struct jpeg_error_mgr". If you +are providing your own error handler, you'll typically want to embed the +jpeg_error_mgr struct in a larger structure; this is discussed later under +"Error handling". For now we'll assume you are just using the default error +handler. The default error handler will print JPEG error/warning messages +on stderr, and it will call exit() if a fatal error occurs. + +You must initialize the error handler structure, store a pointer to it into +the JPEG object's "err" field, and then call jpeg_create_compress() to +initialize the rest of the JPEG object. + +Typical code for this step, if you are using the default error handler, is + + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + +jpeg_create_compress allocates a small amount of memory, so it could fail +if you are out of memory. In that case it will exit via the error handler; +that's why the error handler must be initialized first. + + +2. Specify the destination for the compressed data (eg, a file). + +As previously mentioned, the JPEG library delivers compressed data to a +"data destination" module. The library includes one data destination +module which knows how to write to a stdio stream. You can use your own +destination module if you want to do something else, as discussed later. + +If you use the standard destination module, you must open the target stdio +stream beforehand. Typical code for this step looks like: + + FILE * outfile; + ... + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + +where the last line invokes the standard destination module. + +WARNING: it is critical that the binary compressed data be delivered to the +output file unchanged. On non-Unix systems the stdio library may perform +newline translation or otherwise corrupt binary data. To suppress this +behavior, you may need to use a "b" option to fopen (as shown above), or use +setmode() or another routine to put the stdio stream in binary mode. See +cjpeg.c and djpeg.c for code that has been found to work on many systems. + +You can select the data destination after setting other parameters (step 3), +if that's more convenient. You may not change the destination between +calling jpeg_start_compress() and jpeg_finish_compress(). + + +3. Set parameters for compression, including image size & colorspace. + +You must supply information about the source image by setting the following +fields in the JPEG object (cinfo structure): + + image_width Width of image, in pixels + image_height Height of image, in pixels + input_components Number of color channels (samples per pixel) + in_color_space Color space of source image + +The image dimensions are, hopefully, obvious. JPEG supports image dimensions +of 1 to 64K pixels in either direction. The input color space is typically +RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special +color spaces", later, for more info.) The in_color_space field must be +assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or +JCS_GRAYSCALE. + +JPEG has a large number of compression parameters that determine how the +image is encoded. Most applications don't need or want to know about all +these parameters. You can set all the parameters to reasonable defaults by +calling jpeg_set_defaults(); then, if there are particular values you want +to change, you can do so after that. The "Compression parameter selection" +section tells about all the parameters. + +You must set in_color_space correctly before calling jpeg_set_defaults(), +because the defaults depend on the source image colorspace. However the +other three source image parameters need not be valid until you call +jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more +than once, if that happens to be convenient. + +Typical code for a 24-bit RGB source image is + + cinfo.image_width = Width; /* image width and height, in pixels */ + cinfo.image_height = Height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + + jpeg_set_defaults(&cinfo); + /* Make optional parameter settings here */ + + +4. jpeg_start_compress(...); + +After you have established the data destination and set all the necessary +source image info and other parameters, call jpeg_start_compress() to begin +a compression cycle. This will initialize internal state, allocate working +storage, and emit the first few bytes of the JPEG datastream header. + +Typical code: + + jpeg_start_compress(&cinfo, TRUE); + +The "TRUE" parameter ensures that a complete JPEG interchange datastream +will be written. This is appropriate in most cases. If you think you might +want to use an abbreviated datastream, read the section on abbreviated +datastreams, below. + +Once you have called jpeg_start_compress(), you may not alter any JPEG +parameters or other fields of the JPEG object until you have completed +the compression cycle. + + +5. while (scan lines remain to be written) + jpeg_write_scanlines(...); + +Now write all the required image data by calling jpeg_write_scanlines() +one or more times. You can pass one or more scanlines in each call, up +to the total image height. In most applications it is convenient to pass +just one or a few scanlines at a time. The expected format for the passed +data is discussed under "Data formats", above. + +Image data should be written in top-to-bottom scanline order. The JPEG spec +contains some weasel wording about how top and bottom are application-defined +terms (a curious interpretation of the English language...) but if you want +your files to be compatible with everyone else's, you WILL use top-to-bottom +order. If the source data must be read in bottom-to-top order, you can use +the JPEG library's virtual array mechanism to invert the data efficiently. +Examples of this can be found in the sample application cjpeg. + +The library maintains a count of the number of scanlines written so far +in the next_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.next_scanline < cinfo.image_height)". + +Code for this step depends heavily on the way that you store the source data. +example.c shows the following code for the case of a full-size 2-D source +array containing 3-byte RGB pixels: + + JSAMPROW row_pointer[1]; /* pointer to a single row */ + int row_stride; /* physical row width in buffer */ + + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + +jpeg_write_scanlines() returns the number of scanlines actually written. +This will normally be equal to the number passed in, so you can usually +ignore the return value. It is different in just two cases: + * If you try to write more scanlines than the declared image height, + the additional scanlines are ignored. + * If you use a suspending data destination manager, output buffer overrun + will cause the compressor to return before accepting all the passed lines. + This feature is discussed under "I/O suspension", below. The normal + stdio destination manager will NOT cause this to happen. +In any case, the return value is the same as the change in the value of +next_scanline. + + +6. jpeg_finish_compress(...); + +After all the image data has been written, call jpeg_finish_compress() to +complete the compression cycle. This step is ESSENTIAL to ensure that the +last bufferload of data is written to the data destination. +jpeg_finish_compress() also releases working memory associated with the JPEG +object. + +Typical code: + + jpeg_finish_compress(&cinfo); + +If using the stdio destination manager, don't forget to close the output +stdio stream (if necessary) afterwards. + +If you have requested a multi-pass operating mode, such as Huffman code +optimization, jpeg_finish_compress() will perform the additional passes using +data buffered by the first pass. In this case jpeg_finish_compress() may take +quite a while to complete. With the default compression parameters, this will +not happen. + +It is an error to call jpeg_finish_compress() before writing the necessary +total number of scanlines. If you wish to abort compression, call +jpeg_abort() as discussed below. + +After completing a compression cycle, you may dispose of the JPEG object +as discussed next, or you may use it to compress another image. In that case +return to step 2, 3, or 4 as appropriate. If you do not change the +destination manager, the new datastream will be written to the same target. +If you do not change any JPEG parameters, the new datastream will be written +with the same parameters as before. Note that you can change the input image +dimensions freely between cycles, but if you change the input colorspace, you +should call jpeg_set_defaults() to adjust for the new colorspace; and then +you'll need to repeat all of step 3. + + +7. Release the JPEG compression object. + +When you are done with a JPEG compression object, destroy it by calling +jpeg_destroy_compress(). This will free all subsidiary memory (regardless of +the previous state of the object). Or you can call jpeg_destroy(), which +works for either compression or decompression objects --- this may be more +convenient if you are sharing code between compression and decompression +cases. (Actually, these routines are equivalent except for the declared type +of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy() +should be passed a j_common_ptr.) + +If you allocated the jpeg_compress_struct structure from malloc(), freeing +it is your responsibility --- jpeg_destroy() won't. Ditto for the error +handler structure. + +Typical code: + + jpeg_destroy_compress(&cinfo); + + +8. Aborting. + +If you decide to abort a compression cycle before finishing, you can clean up +in either of two ways: + +* If you don't need the JPEG object any more, just call + jpeg_destroy_compress() or jpeg_destroy() to release memory. This is + legitimate at any point after calling jpeg_create_compress() --- in fact, + it's safe even if jpeg_create_compress() fails. + +* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call + jpeg_abort() which works on both compression and decompression objects. + This will return the object to an idle state, releasing any working memory. + jpeg_abort() is allowed at any time after successful object creation. + +Note that cleaning up the data destination, if required, is your +responsibility; neither of these routines will call term_destination(). +(See "Compressed data handling", below, for more about that.) + +jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG +object that has reported an error by calling error_exit (see "Error handling" +for more info). The internal state of such an object is likely to be out of +whack. Either of these two routines will return the object to a known state. + + +Decompression details +--------------------- + +Here we revisit the JPEG decompression outline given in the overview. + +1. Allocate and initialize a JPEG decompression object. + +This is just like initialization for compression, as discussed above, +except that the object is a "struct jpeg_decompress_struct" and you +call jpeg_create_decompress(). Error handling is exactly the same. + +Typical code: + + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + +(Both here and in the IJG code, we usually use variable name "cinfo" for +both compression and decompression objects.) + + +2. Specify the source of the compressed data (eg, a file). + +As previously mentioned, the JPEG library reads compressed data from a "data +source" module. The library includes one data source module which knows how +to read from a stdio stream. You can use your own source module if you want +to do something else, as discussed later. + +If you use the standard source module, you must open the source stdio stream +beforehand. Typical code for this step looks like: + + FILE * infile; + ... + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_src(&cinfo, infile); + +where the last line invokes the standard source module. + +WARNING: it is critical that the binary compressed data be read unchanged. +On non-Unix systems the stdio library may perform newline translation or +otherwise corrupt binary data. To suppress this behavior, you may need to use +a "b" option to fopen (as shown above), or use setmode() or another routine to +put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that +has been found to work on many systems. + +You may not change the data source between calling jpeg_read_header() and +jpeg_finish_decompress(). If you wish to read a series of JPEG images from +a single source file, you should repeat the jpeg_read_header() to +jpeg_finish_decompress() sequence without reinitializing either the JPEG +object or the data source module; this prevents buffered input data from +being discarded. + + +3. Call jpeg_read_header() to obtain image info. + +Typical code for this step is just + + jpeg_read_header(&cinfo, TRUE); + +This will read the source datastream header markers, up to the beginning +of the compressed data proper. On return, the image dimensions and other +info have been stored in the JPEG object. The application may wish to +consult this information before selecting decompression parameters. + +More complex code is necessary if + * A suspending data source is used --- in that case jpeg_read_header() + may return before it has read all the header data. See "I/O suspension", + below. The normal stdio source manager will NOT cause this to happen. + * Abbreviated JPEG files are to be processed --- see the section on + abbreviated datastreams. Standard applications that deal only in + interchange JPEG files need not be concerned with this case either. + +It is permissible to stop at this point if you just wanted to find out the +image dimensions and other header info for a JPEG file. In that case, +call jpeg_destroy() when you are done with the JPEG object, or call +jpeg_abort() to return it to an idle state before selecting a new data +source and reading another header. + + +4. Set parameters for decompression. + +jpeg_read_header() sets appropriate default decompression parameters based on +the properties of the image (in particular, its colorspace). However, you +may well want to alter these defaults before beginning the decompression. +For example, the default is to produce full color output from a color file. +If you want colormapped output you must ask for it. Other options allow the +returned image to be scaled and allow various speed/quality tradeoffs to be +selected. "Decompression parameter selection", below, gives details. + +If the defaults are appropriate, nothing need be done at this step. + +Note that all default values are set by each call to jpeg_read_header(). +If you reuse a decompression object, you cannot expect your parameter +settings to be preserved across cycles, as you can for compression. +You must set desired parameter values each time. + + +5. jpeg_start_decompress(...); + +Once the parameter values are satisfactory, call jpeg_start_decompress() to +begin decompression. This will initialize internal state, allocate working +memory, and prepare for returning data. + +Typical code is just + + jpeg_start_decompress(&cinfo); + +If you have requested a multi-pass operating mode, such as 2-pass color +quantization, jpeg_start_decompress() will do everything needed before data +output can begin. In this case jpeg_start_decompress() may take quite a while +to complete. With a single-scan (non progressive) JPEG file and default +decompression parameters, this will not happen; jpeg_start_decompress() will +return quickly. + +After this call, the final output image dimensions, including any requested +scaling, are available in the JPEG object; so is the selected colormap, if +colormapped output has been requested. Useful fields include + + output_width image width and height, as scaled + output_height + out_color_components # of color components in out_color_space + output_components # of color components returned per pixel + colormap the selected colormap, if any + actual_number_of_colors number of entries in colormap + +output_components is 1 (a colormap index) when quantizing colors; otherwise it +equals out_color_components. It is the number of JSAMPLE values that will be +emitted per pixel in the output arrays. + +Typically you will need to allocate data buffers to hold the incoming image. +You will need output_width * output_components JSAMPLEs per scanline in your +output buffer, and a total of output_height scanlines will be returned. + +Note: if you are using the JPEG library's internal memory manager to allocate +data buffers (as djpeg does), then the manager's protocol requires that you +request large buffers *before* calling jpeg_start_decompress(). This is a +little tricky since the output_XXX fields are not normally valid then. You +can make them valid by calling jpeg_calc_output_dimensions() after setting the +relevant parameters (scaling, output color space, and quantization flag). + + +6. while (scan lines remain to be read) + jpeg_read_scanlines(...); + +Now you can read the decompressed image data by calling jpeg_read_scanlines() +one or more times. At each call, you pass in the maximum number of scanlines +to be read (ie, the height of your working buffer); jpeg_read_scanlines() +will return up to that many lines. The return value is the number of lines +actually read. The format of the returned data is discussed under "Data +formats", above. Don't forget that grayscale and color JPEGs will return +different data formats! + +Image data is returned in top-to-bottom scanline order. If you must write +out the image in bottom-to-top order, you can use the JPEG library's virtual +array mechanism to invert the data efficiently. Examples of this can be +found in the sample application djpeg. + +The library maintains a count of the number of scanlines returned so far +in the output_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test +should NOT be against image_height, unless you never use scaling. The +image_height field is the height of the original unscaled image.) +The return value always equals the change in the value of output_scanline. + +If you don't use a suspending data source, it is safe to assume that +jpeg_read_scanlines() reads at least one scanline per call, until the +bottom of the image has been reached. + +If you use a buffer larger than one scanline, it is NOT safe to assume that +jpeg_read_scanlines() fills it. (The current implementation returns only a +few scanlines per call, no matter how large a buffer you pass.) So you must +always provide a loop that calls jpeg_read_scanlines() repeatedly until the +whole image has been read. + + +7. jpeg_finish_decompress(...); + +After all the image data has been read, call jpeg_finish_decompress() to +complete the decompression cycle. This causes working memory associated +with the JPEG object to be released. + +Typical code: + + jpeg_finish_decompress(&cinfo); + +If using the stdio source manager, don't forget to close the source stdio +stream if necessary. + +It is an error to call jpeg_finish_decompress() before reading the correct +total number of scanlines. If you wish to abort decompression, call +jpeg_abort() as discussed below. + +After completing a decompression cycle, you may dispose of the JPEG object as +discussed next, or you may use it to decompress another image. In that case +return to step 2 or 3 as appropriate. If you do not change the source +manager, the next image will be read from the same source. + + +8. Release the JPEG decompression object. + +When you are done with a JPEG decompression object, destroy it by calling +jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of +destroying compression objects applies here too. + +Typical code: + + jpeg_destroy_decompress(&cinfo); + + +9. Aborting. + +You can abort a decompression cycle by calling jpeg_destroy_decompress() or +jpeg_destroy() if you don't need the JPEG object any more, or +jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object. +The previous discussion of aborting compression cycles applies here too. + + +Mechanics of usage: include files, linking, etc +----------------------------------------------- + +Applications using the JPEG library should include the header file jpeglib.h +to obtain declarations of data types and routines. Before including +jpeglib.h, include system headers that define at least the typedefs FILE and +size_t. On ANSI-conforming systems, including is sufficient; on +older Unix systems, you may need to define size_t. + +If the application needs to refer to individual JPEG library error codes, also +include jerror.h to define those symbols. + +jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are +installing the JPEG header files in a system directory, you will want to +install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h. + +The most convenient way to include the JPEG code into your executable program +is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix +machines) and reference it at your link step. If you use only half of the +library (only compression or only decompression), only that much code will be +included from the library, unless your linker is hopelessly brain-damaged. +The supplied makefiles build libjpeg.a automatically (see install.txt). + +While you can build the JPEG library as a shared library if the whim strikes +you, we don't really recommend it. The trouble with shared libraries is that +at some point you'll probably try to substitute a new version of the library +without recompiling the calling applications. That generally doesn't work +because the parameter struct declarations usually change with each new +version. In other words, the library's API is *not* guaranteed binary +compatible across versions; we only try to ensure source-code compatibility. +(In hindsight, it might have been smarter to hide the parameter structs from +applications and introduce a ton of access functions instead. Too late now, +however.) + +On some systems your application may need to set up a signal handler to ensure +that temporary files are deleted if the program is interrupted. This is most +critical if you are on MS-DOS and use the jmemdos.c memory manager back end; +it will try to grab extended memory for temp files, and that space will NOT be +freed automatically. See cjpeg.c or djpeg.c for an example signal handler. + +It may be worth pointing out that the core JPEG library does not actually +require the stdio library: only the default source/destination managers and +error handler need it. You can use the library in a stdio-less environment +if you replace those modules and use jmemnobs.c (or another memory manager of +your own devising). More info about the minimum system library requirements +may be found in jinclude.h. + + +ADVANCED FEATURES +================= + +Compression parameter selection +------------------------------- + +This section describes all the optional parameters you can set for JPEG +compression, as well as the "helper" routines provided to assist in this +task. Proper setting of some parameters requires detailed understanding +of the JPEG standard; if you don't know what a parameter is for, it's best +not to mess with it! See REFERENCES in the README file for pointers to +more info about JPEG. + +It's a good idea to call jpeg_set_defaults() first, even if you plan to set +all the parameters; that way your code is more likely to work with future JPEG +libraries that have additional parameters. For the same reason, we recommend +you use a helper routine where one is provided, in preference to twiddling +cinfo fields directly. + +The helper routines are: + +jpeg_set_defaults (j_compress_ptr cinfo) + This routine sets all JPEG parameters to reasonable defaults, using + only the input image's color space (field in_color_space, which must + already be set in cinfo). Many applications will only need to use + this routine and perhaps jpeg_set_quality(). + +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) + Sets the JPEG file's colorspace (field jpeg_color_space) as specified, + and sets other color-space-dependent parameters appropriately. See + "Special color spaces", below, before using this. A large number of + parameters, including all per-component parameters, are set by this + routine; if you want to twiddle individual parameters you should call + jpeg_set_colorspace() before rather than after. + +jpeg_default_colorspace (j_compress_ptr cinfo) + Selects an appropriate JPEG colorspace based on cinfo->in_color_space, + and calls jpeg_set_colorspace(). This is actually a subroutine of + jpeg_set_defaults(). It's broken out in case you want to change + just the colorspace-dependent JPEG parameters. + +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) + Constructs JPEG quantization tables appropriate for the indicated + quality setting. The quality value is expressed on the 0..100 scale + recommended by IJG (cjpeg's "-quality" switch uses this routine). + Note that the exact mapping from quality values to tables may change + in future IJG releases as more is learned about DCT quantization. + If the force_baseline parameter is TRUE, then the quantization table + entries are constrained to the range 1..255 for full JPEG baseline + compatibility. In the current implementation, this only makes a + difference for quality settings below 25, and it effectively prevents + very small/low quality files from being generated. The IJG decoder + is capable of reading the non-baseline files generated at low quality + settings when force_baseline is FALSE, but other decoders may not be. + +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) + Same as jpeg_set_quality() except that the generated tables are the + sample tables given in the JPEC spec section K.1, multiplied by the + specified scale factor (which is expressed as a percentage; thus + scale_factor = 100 reproduces the spec's tables). Note that larger + scale factors give lower quality. This entry point is useful for + conforming to the Adobe PostScript DCT conventions, but we do not + recommend linear scaling as a user-visible quality scale otherwise. + force_baseline again constrains the computed table entries to 1..255. + +int jpeg_quality_scaling (int quality) + Converts a value on the IJG-recommended quality scale to a linear + scaling percentage. Note that this routine may change or go away + in future releases --- IJG may choose to adopt a scaling method that + can't be expressed as a simple scalar multiplier, in which case the + premise of this routine collapses. Caveat user. + +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) + Set default quantization tables with linear q_scale_factor[] values + (see below). + +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) + Allows an arbitrary quantization table to be created. which_tbl + indicates which table slot to fill. basic_table points to an array + of 64 unsigned ints given in normal array order. These values are + multiplied by scale_factor/100 and then clamped to the range 1..65535 + (or to 1..255 if force_baseline is TRUE). + CAUTION: prior to library version 6a, jpeg_add_quant_table expected + the basic table to be given in JPEG zigzag order. If you need to + write code that works with either older or newer versions of this + routine, you must check the library version number. Something like + "#if JPEG_LIB_VERSION >= 61" is the right test. + +jpeg_simple_progression (j_compress_ptr cinfo) + Generates a default scan script for writing a progressive-JPEG file. + This is the recommended method of creating a progressive file, + unless you want to make a custom scan sequence. You must ensure that + the JPEG color space is set correctly before calling this routine. + + +Compression parameters (cinfo fields) include: + +boolean arith_code + If TRUE, use arithmetic coding. + If FALSE, use Huffman coding. + +int block_size + Set DCT block size. All N from 1 to 16 are possible. + Default is 8 (baseline format). + Larger values produce higher compression, + smaller values produce higher quality. + An exact DCT stage is possible with 1 or 2. + With the default quality of 75 and default Luminance qtable + the DCT+Quantization stage is lossless for value 1. + Note that values other than 8 require a SmartScale capable decoder, + introduced with IJG JPEG 8. Setting the block_size parameter for + compression works with version 8c and later. + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are: + JDCT_ISLOW: slow but accurate integer algorithm + JDCT_IFAST: faster, less accurate integer method + JDCT_FLOAT: floating-point method + JDCT_DEFAULT: default method (normally JDCT_ISLOW) + JDCT_FASTEST: fastest method (normally JDCT_IFAST) + The FLOAT method is very slightly more accurate than the ISLOW method, + but may give different results on different machines due to varying + roundoff behavior. The integer methods should give the same results + on all machines. On machines with sufficiently fast FP hardware, the + floating-point method may also be the fastest. The IFAST method is + considerably less accurate than the other two; its use is not + recommended if high quality is a concern. JDCT_DEFAULT and + JDCT_FASTEST are macros configurable by each installation. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Default is + 1/1, or no scaling. Currently, the supported scaling ratios are + M/N with all N from 1 to 16, where M is the destination DCT size, + which is 8 by default (see block_size parameter above). + (The library design allows for arbitrary scaling ratios but this + is not likely to be implemented any time soon.) + +J_COLOR_SPACE jpeg_color_space +int num_components + The JPEG color space and corresponding number of components; see + "Special color spaces", below, for more info. We recommend using + jpeg_set_colorspace() if you want to change these. + +J_COLOR_TRANSFORM color_transform + Internal color transform identifier, writes LSE marker if nonzero + (requires decoder with inverse color transform support, introduced + with IJG JPEG 9). + Two values are currently possible: JCT_NONE and JCT_SUBTRACT_GREEN. + Set this value for lossless RGB application *before* calling + jpeg_set_colorspace(), because entropy table assignment in + jpeg_set_colorspace() depends on color_transform. + +boolean optimize_coding + TRUE causes the compressor to compute optimal Huffman coding tables + for the image. This requires an extra pass over the data and + therefore costs a good deal of space and time. The default is + FALSE, which tells the compressor to use the supplied or default + Huffman tables. In most cases optimal tables save only a few percent + of file size compared to the default tables. Note that when this is + TRUE, you need not supply Huffman tables at all, and any you do + supply will be overwritten. + +unsigned int restart_interval +int restart_in_rows + To emit restart markers in the JPEG file, set one of these nonzero. + Set restart_interval to specify the exact interval in MCU blocks. + Set restart_in_rows to specify the interval in MCU rows. (If + restart_in_rows is not 0, then restart_interval is set after the + image width in MCUs is computed.) Defaults are zero (no restarts). + One restart marker per MCU row is often a good choice. + NOTE: the overhead of restart markers is higher in grayscale JPEG + files than in color files, and MUCH higher in progressive JPEGs. + If you use restarts, you may want to use larger intervals in those + cases. + +const jpeg_scan_info * scan_info +int num_scans + By default, scan_info is NULL; this causes the compressor to write a + single-scan sequential JPEG file. If not NULL, scan_info points to + an array of scan definition records of length num_scans. The + compressor will then write a JPEG file having one scan for each scan + definition record. This is used to generate noninterleaved or + progressive JPEG files. The library checks that the scan array + defines a valid JPEG scan sequence. (jpeg_simple_progression creates + a suitable scan definition array for progressive JPEG.) This is + discussed further under "Progressive JPEG support". + +boolean do_fancy_downsampling + If TRUE, use direct DCT scaling with DCT size > 8 for downsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate downsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_upsampling value in decompression. + +int smoothing_factor + If non-zero, the input image is smoothed; the value should be 1 for + minimal smoothing to 100 for maximum smoothing. Consult jcsample.c + for details of the smoothing algorithm. The default is zero. + +boolean write_JFIF_header + If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space + (ie, YCbCr or grayscale) is selected, otherwise FALSE. + +UINT8 JFIF_major_version +UINT8 JFIF_minor_version + The version number to be written into the JFIF marker. + jpeg_set_defaults() initializes the version to 1.01 (major=minor=1). + You should set it to 1.02 (major=1, minor=2) if you plan to write + any JFIF 1.02 extension markers. + +UINT8 density_unit +UINT16 X_density +UINT16 Y_density + The resolution information to be written into the JFIF marker; + not used otherwise. density_unit may be 0 for unknown, + 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1 + indicating square pixels of unknown size. + +boolean write_Adobe_marker + If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK, + or YCCK is selected, otherwise FALSE. It is generally a bad idea + to set both write_JFIF_header and write_Adobe_marker. In fact, + you probably shouldn't change the default settings at all --- the + default behavior ensures that the JPEG file's color space can be + recognized by the decoder. + +JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS] + Pointers to coefficient quantization tables, one per table slot, + or NULL if no table is defined for a slot. Usually these should + be set via one of the above helper routines; jpeg_add_quant_table() + is general enough to define any quantization table. The other + routines will set up table slot 0 for luminance quality and table + slot 1 for chrominance. + +int q_scale_factor[NUM_QUANT_TBLS] + Linear quantization scaling factors (percentage, initialized 100) + for use with jpeg_default_qtables(). + See rdswitch.c and cjpeg.c for an example of usage. + Note that the q_scale_factor[] fields are the "linear" scales, so you + have to convert from user-defined ratings via jpeg_quality_scaling(). + Here is an example code which corresponds to cjpeg -quality 90,70: + + jpeg_set_defaults(cinfo); + + /* Set luminance quality 90. */ + cinfo->q_scale_factor[0] = jpeg_quality_scaling(90); + /* Set chrominance quality 70. */ + cinfo->q_scale_factor[1] = jpeg_quality_scaling(70); + + jpeg_default_qtables(cinfo, force_baseline); + + CAUTION: You must also set 1x1 subsampling for efficient separate + color quality selection, since the default value used by library + is 2x2: + + cinfo->comp_info[0].v_samp_factor = 1; + cinfo->comp_info[0].h_samp_factor = 1; + +JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS] +JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS] + Pointers to Huffman coding tables, one per table slot, or NULL if + no table is defined for a slot. Slots 0 and 1 are filled with the + JPEG sample tables by jpeg_set_defaults(). If you need to allocate + more table structures, jpeg_alloc_huff_table() may be used. + Note that optimal Huffman tables can be computed for an image + by setting optimize_coding, as discussed above; there's seldom + any need to mess with providing your own Huffman tables. + + +The actual dimensions of the JPEG image that will be written to the file are +given by the following fields. These are computed from the input image +dimensions and the compression parameters by jpeg_start_compress(). You can +also call jpeg_calc_jpeg_dimensions() to obtain the values that will result +from the current parameter settings. This can be useful if you are trying +to pick a scaling ratio that will get close to a desired target size. + +JDIMENSION jpeg_width Actual dimensions of output image. +JDIMENSION jpeg_height + + +Per-component parameters are stored in the struct cinfo.comp_info[i] for +component number i. Note that components here refer to components of the +JPEG color space, *not* the source image color space. A suitably large +comp_info[] array is allocated by jpeg_set_defaults(); if you choose not +to use that routine, it's up to you to allocate the array. + +int component_id + The one-byte identifier code to be recorded in the JPEG file for + this component. For the standard color spaces, we recommend you + leave the default values alone. + +int h_samp_factor +int v_samp_factor + Horizontal and vertical sampling factors for the component; must + be 1..4 according to the JPEG standard. Note that larger sampling + factors indicate a higher-resolution component; many people find + this behavior quite unintuitive. The default values are 2,2 for + luminance components and 1,1 for chrominance components, except + for grayscale where 1,1 is used. + +int quant_tbl_no + Quantization table number for component. The default value is + 0 for luminance components and 1 for chrominance components. + +int dc_tbl_no +int ac_tbl_no + DC and AC entropy coding table numbers. The default values are + 0 for luminance components and 1 for chrominance components. + +int component_index + Must equal the component's index in comp_info[]. (Beginning in + release v6, the compressor library will fill this in automatically; + you don't have to.) + + +Decompression parameter selection +--------------------------------- + +Decompression parameter selection is somewhat simpler than compression +parameter selection, since all of the JPEG internal parameters are +recorded in the source file and need not be supplied by the application. +(Unless you are working with abbreviated files, in which case see +"Abbreviated datastreams", below.) Decompression parameters control +the postprocessing done on the image to deliver it in a format suitable +for the application's use. Many of the parameters control speed/quality +tradeoffs, in which faster decompression may be obtained at the price of +a poorer-quality image. The defaults select the highest quality (slowest) +processing. + +The following fields in the JPEG object are set by jpeg_read_header() and +may be useful to the application in choosing decompression parameters: + +JDIMENSION image_width Width and height of image +JDIMENSION image_height +int num_components Number of color components +J_COLOR_SPACE jpeg_color_space Colorspace of image +boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen + UINT8 JFIF_major_version Version information from JFIF marker + UINT8 JFIF_minor_version + UINT8 density_unit Resolution data from JFIF marker + UINT16 X_density + UINT16 Y_density +boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen + UINT8 Adobe_transform Color transform code from Adobe marker + +The JPEG color space, unfortunately, is something of a guess since the JPEG +standard proper does not provide a way to record it. In practice most files +adhere to the JFIF or Adobe conventions, and the decoder will recognize these +correctly. See "Special color spaces", below, for more info. + + +The decompression parameters that determine the basic properties of the +returned image are: + +J_COLOR_SPACE out_color_space + Output color space. jpeg_read_header() sets an appropriate default + based on jpeg_color_space; typically it will be RGB or grayscale. + The application can change this field to request output in a different + colorspace. For example, set it to JCS_GRAYSCALE to get grayscale + output from a color file. (This is useful for previewing: grayscale + output is faster than full color since the color components need not + be processed.) Note that not all possible color space transforms are + currently implemented; you may need to extend jdcolor.c if you want an + unusual conversion. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Currently, + the supported scaling ratios are M/N with all M from 1 to 16, where + N is the source DCT size, which is 8 for baseline JPEG. (The library + design allows for arbitrary scaling ratios but this is not likely + to be implemented any time soon.) The values are initialized by + jpeg_read_header() with the source DCT size. For baseline JPEG + this is 8/8. If you change only the scale_num value while leaving + the other unchanged, then this specifies the DCT scaled size to be + applied on the given input. For baseline JPEG this is equivalent + to M/8 scaling, since the source DCT size for baseline JPEG is 8. + Smaller scaling ratios permit significantly faster decoding since + fewer pixels need be processed and a simpler IDCT method can be used. + +boolean quantize_colors + If set TRUE, colormapped output will be delivered. Default is FALSE, + meaning that full-color output will be delivered. + +The next three parameters are relevant only if quantize_colors is TRUE. + +int desired_number_of_colors + Maximum number of colors to use in generating a library-supplied color + map (the actual number of colors is returned in a different field). + Default 256. Ignored when the application supplies its own color map. + +boolean two_pass_quantize + If TRUE, an extra pass over the image is made to select a custom color + map for the image. This usually looks a lot better than the one-size- + fits-all colormap that is used otherwise. Default is TRUE. Ignored + when the application supplies its own color map. + +J_DITHER_MODE dither_mode + Selects color dithering method. Supported values are: + JDITHER_NONE no dithering: fast, very low quality + JDITHER_ORDERED ordered dither: moderate speed and quality + JDITHER_FS Floyd-Steinberg dither: slow, high quality + Default is JDITHER_FS. (At present, ordered dither is implemented + only in the single-pass, standard-colormap case. If you ask for + ordered dither when two_pass_quantize is TRUE or when you supply + an external color map, you'll get F-S dithering.) + +When quantize_colors is TRUE, the target color map is described by the next +two fields. colormap is set to NULL by jpeg_read_header(). The application +can supply a color map by setting colormap non-NULL and setting +actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress() +selects a suitable color map and sets these two fields itself. +[Implementation restriction: at present, an externally supplied colormap is +only accepted for 3-component output color spaces.] + +JSAMPARRAY colormap + The color map, represented as a 2-D pixel array of out_color_components + rows and actual_number_of_colors columns. Ignored if not quantizing. + CAUTION: if the JPEG library creates its own colormap, the storage + pointed to by this field is released by jpeg_finish_decompress(). + Copy the colormap somewhere else first, if you want to save it. + +int actual_number_of_colors + The number of colors in the color map. + +Additional decompression parameters that the application may set include: + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are the same + as described above for compression. + +boolean do_fancy_upsampling + If TRUE, use direct DCT scaling with DCT size > 8 for upsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate upsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_downsampling value in compression. + +boolean do_block_smoothing + If TRUE, interblock smoothing is applied in early stages of decoding + progressive JPEG files; if FALSE, not. Default is TRUE. Early + progression stages look "fuzzy" with smoothing, "blocky" without. + In any case, block smoothing ceases to be applied after the first few + AC coefficients are known to full accuracy, so it is relevant only + when using buffered-image mode for progressive images. + +boolean enable_1pass_quant +boolean enable_external_quant +boolean enable_2pass_quant + These are significant only in buffered-image mode, which is + described in its own section below. + + +The output image dimensions are given by the following fields. These are +computed from the source image dimensions and the decompression parameters +by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions() +to obtain the values that will result from the current parameter settings. +This can be useful if you are trying to pick a scaling ratio that will get +close to a desired target size. It's also important if you are using the +JPEG library's memory manager to allocate output buffer space, because you +are supposed to request such buffers *before* jpeg_start_decompress(). + +JDIMENSION output_width Actual dimensions of output image. +JDIMENSION output_height +int out_color_components Number of color components in out_color_space. +int output_components Number of color components returned. +int rec_outbuf_height Recommended height of scanline buffer. + +When quantizing colors, output_components is 1, indicating a single color map +index per pixel. Otherwise it equals out_color_components. The output arrays +are required to be output_width * output_components JSAMPLEs wide. + +rec_outbuf_height is the recommended minimum height (in scanlines) of the +buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the +library will still work, but time will be wasted due to unnecessary data +copying. In high-quality modes, rec_outbuf_height is always 1, but some +faster, lower-quality modes set it to larger values (typically 2 to 4). +If you are going to ask for a high-speed processing mode, you may as well +go to the trouble of honoring rec_outbuf_height so as to avoid data copying. +(An output buffer larger than rec_outbuf_height lines is OK, but won't +provide any material speed improvement over that height.) + + +Special color spaces +-------------------- + +The JPEG standard itself is "color blind" and doesn't specify any particular +color space. It is customary to convert color data to a luminance/chrominance +color space before compressing, since this permits greater compression. The +existing JPEG file interchange format standards specify YCbCr or GRAYSCALE +data (JFIF version 1), GRAYSCALE, RGB, YCbCr, CMYK, or YCCK (Adobe), or BG_RGB +or BG_YCC (big gamut color spaces, JFIF version 2). For special applications +such as multispectral images, other color spaces can be used, +but it must be understood that such files will be unportable. + +The JPEG library can handle the most common colorspace conversions (namely +RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown +color space, passing it through without conversion. If you deal extensively +with an unusual color space, you can easily extend the library to understand +additional color spaces and perform appropriate conversions. + +For compression, the source data's color space is specified by field +in_color_space. This is transformed to the JPEG file's color space given +by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color +space depending on in_color_space, but you can override this by calling +jpeg_set_colorspace(). Of course you must select a supported transformation. +jccolor.c currently supports the following transformations: + RGB => YCbCr + RGB => GRAYSCALE + RGB => BG_YCC + YCbCr => GRAYSCALE + YCbCr => BG_YCC + CMYK => YCCK +plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB, +BG_RGB => BG_RGB, YCbCr => YCbCr, BG_YCC => BG_YCC, CMYK => CMYK, +YCCK => YCCK, and UNKNOWN => UNKNOWN. + +The file interchange format standards (JFIF and Adobe) specify APPn markers +that indicate the color space of the JPEG file. It is important to ensure +that these are written correctly, or omitted if the JPEG file's color space +is not one of the ones supported by the interchange standards. +jpeg_set_colorspace() will set the compression parameters to include or omit +the APPn markers properly, so long as it is told the truth about the JPEG +color space. For example, if you are writing some random 3-component color +space without conversion, don't try to fake out the library by setting +in_color_space and jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. +You may want to write an APPn marker of your own devising to identify +the colorspace --- see "Special markers", below. + +When told that the color space is UNKNOWN, the library will default to using +luminance-quality compression parameters for all color components. You may +well want to change these parameters. See the source code for +jpeg_set_colorspace(), in jcparam.c, for details. + +For decompression, the JPEG file's color space is given in jpeg_color_space, +and this is transformed to the output color space out_color_space. +jpeg_read_header's setting of jpeg_color_space can be relied on if the file +conforms to JFIF or Adobe conventions, but otherwise it is no better than a +guess. If you know the JPEG file's color space for certain, you can override +jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also +selects a default output color space based on (its guess of) jpeg_color_space; +set out_color_space to override this. Again, you must select a supported +transformation. jdcolor.c currently supports + YCbCr => RGB + YCbCr => GRAYSCALE + BG_YCC => RGB + BG_YCC => GRAYSCALE + RGB => GRAYSCALE + GRAYSCALE => RGB + YCCK => CMYK +as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an +application can force grayscale JPEGs to look like color JPEGs if it only +wants to handle one case.) + +The two-pass color quantizer, jquant2.c, is specialized to handle RGB data +(it weights distances appropriately for RGB colors). You'll need to modify +the code if you want to use it for non-RGB output color spaces. Note that +jquant2.c is used to map to an application-supplied colormap as well as for +the normal two-pass colormap selection process. + +CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG +files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect. +This is arguably a bug in Photoshop, but if you need to work with Photoshop +CMYK files, you will have to deal with it in your application. We cannot +"fix" this in the library by inverting the data during the CMYK<=>YCCK +transform, because that would break other applications, notably Ghostscript. +Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK +data in the same inverted-YCCK representation used in bare JPEG files, but +the surrounding PostScript code performs an inversion using the PS image +operator. I am told that Photoshop 3.0 will write uninverted YCCK in +EPS/JPEG files, and will omit the PS-level inversion. (But the data +polarity used in bare JPEG files will not change in 3.0.) In either case, +the JPEG library must not invert the data itself, or else Ghostscript would +read these EPS files incorrectly. + + +Error handling +-------------- + +When the default error handler is used, any error detected inside the JPEG +routines will cause a message to be printed on stderr, followed by exit(). +You can supply your own error handling routines to override this behavior +and to control the treatment of nonfatal warnings and trace/debug messages. +The file example.c illustrates the most common case, which is to have the +application regain control after an error rather than exiting. + +The JPEG library never writes any message directly; it always goes through +the error handling routines. Three classes of messages are recognized: + * Fatal errors: the library cannot continue. + * Warnings: the library can continue, but the data is corrupt, and a + damaged output image is likely to result. + * Trace/informational messages. These come with a trace level indicating + the importance of the message; you can control the verbosity of the + program by adjusting the maximum trace level that will be displayed. + +You may, if you wish, simply replace the entire JPEG error handling module +(jerror.c) with your own code. However, you can avoid code duplication by +only replacing some of the routines depending on the behavior you need. +This is accomplished by calling jpeg_std_error() as usual, but then overriding +some of the method pointers in the jpeg_error_mgr struct, as illustrated by +example.c. + +All of the error handling routines will receive a pointer to the JPEG object +(a j_common_ptr which points to either a jpeg_compress_struct or a +jpeg_decompress_struct; if you need to tell which, test the is_decompressor +field). This struct includes a pointer to the error manager struct in its +"err" field. Frequently, custom error handler routines will need to access +additional data which is not known to the JPEG library or the standard error +handler. The most convenient way to do this is to embed either the JPEG +object or the jpeg_error_mgr struct in a larger structure that contains +additional fields; then casting the passed pointer provides access to the +additional fields. Again, see example.c for one way to do it. (Beginning +with IJG version 6b, there is also a void pointer "client_data" in each +JPEG object, which the application can also use to find related data. +The library does not touch client_data at all.) + +The individual methods that you might wish to override are: + +error_exit (j_common_ptr cinfo) + Receives control for a fatal error. Information sufficient to + generate the error message has been stored in cinfo->err; call + output_message to display it. Control must NOT return to the caller; + generally this routine will exit() or longjmp() somewhere. + Typically you would override this routine to get rid of the exit() + default behavior. Note that if you continue processing, you should + clean up the JPEG object with jpeg_abort() or jpeg_destroy(). + +output_message (j_common_ptr cinfo) + Actual output of any JPEG message. Override this to send messages + somewhere other than stderr. Note that this method does not know + how to generate a message, only where to send it. + +format_message (j_common_ptr cinfo, char * buffer) + Constructs a readable error message string based on the error info + stored in cinfo->err. This method is called by output_message. Few + applications should need to override this method. One possible + reason for doing so is to implement dynamic switching of error message + language. + +emit_message (j_common_ptr cinfo, int msg_level) + Decide whether or not to emit a warning or trace message; if so, + calls output_message. The main reason for overriding this method + would be to abort on warnings. msg_level is -1 for warnings, + 0 and up for trace messages. + +Only error_exit() and emit_message() are called from the rest of the JPEG +library; the other two are internal to the error handler. + +The actual message texts are stored in an array of strings which is pointed to +by the field err->jpeg_message_table. The messages are numbered from 0 to +err->last_jpeg_message, and it is these code numbers that are used in the +JPEG library code. You could replace the message texts (for instance, with +messages in French or German) by changing the message table pointer. See +jerror.h for the default texts. CAUTION: this table will almost certainly +change or grow from one library version to the next. + +It may be useful for an application to add its own message texts that are +handled by the same mechanism. The error handler supports a second "add-on" +message table for this purpose. To define an addon table, set the pointer +err->addon_message_table and the message numbers err->first_addon_message and +err->last_addon_message. If you number the addon messages beginning at 1000 +or so, you won't have to worry about conflicts with the library's built-in +messages. See the sample applications cjpeg/djpeg for an example of using +addon messages (the addon messages are defined in cderror.h). + +Actual invocation of the error handler is done via macros defined in jerror.h: + ERREXITn(...) for fatal errors + WARNMSn(...) for corrupt-data warnings + TRACEMSn(...) for trace and informational messages. +These macros store the message code and any additional parameters into the +error handler struct, then invoke the error_exit() or emit_message() method. +The variants of each macro are for varying numbers of additional parameters. +The additional parameters are inserted into the generated message using +standard printf() format codes. + +See jerror.h and jerror.c for further details. + + +Compressed data handling (source and destination managers) +---------------------------------------------------------- + +The JPEG compression library sends its compressed data to a "destination +manager" module. The default destination manager just writes the data to a +memory buffer or to a stdio stream, but you can provide your own manager to +do something else. Similarly, the decompression library calls a "source +manager" to obtain the compressed data; you can provide your own source +manager if you want the data to come from somewhere other than a memory +buffer or a stdio stream. + +In both cases, compressed data is processed a bufferload at a time: the +destination or source manager provides a work buffer, and the library invokes +the manager only when the buffer is filled or emptied. (You could define a +one-character buffer to force the manager to be invoked for each byte, but +that would be rather inefficient.) The buffer's size and location are +controlled by the manager, not by the library. For example, the memory +source manager just makes the buffer pointer and length point to the original +data in memory. In this case the buffer-reload procedure will be invoked +only if the decompressor ran off the end of the datastream, which would +indicate an erroneous datastream. + +The work buffer is defined as an array of datatype JOCTET, which is generally +"char" or "unsigned char". On a machine where char is not exactly 8 bits +wide, you must define JOCTET as a wider data type and then modify the data +source and destination modules to transcribe the work arrays into 8-bit units +on external storage. + +A data destination manager struct contains a pointer and count defining the +next byte to write in the work buffer and the remaining free space: + + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is filled. The manager's empty_output_buffer method must reset the pointer +and count. The manager is expected to remember the buffer's starting address +and total size in private fields not visible to the library. + +A data destination manager provides three methods: + +init_destination (j_compress_ptr cinfo) + Initialize destination. This is called by jpeg_start_compress() + before any data is actually written. It must initialize + next_output_byte and free_in_buffer. free_in_buffer must be + initialized to a positive value. + +empty_output_buffer (j_compress_ptr cinfo) + This is called whenever the buffer has filled (free_in_buffer + reaches zero). In typical applications, it should write out the + *entire* buffer (use the saved start address and buffer length; + ignore the current state of next_output_byte and free_in_buffer). + Then reset the pointer & count to the start of the buffer, and + return TRUE indicating that the buffer has been dumped. + free_in_buffer must be set to a positive value when TRUE is + returned. A FALSE return should only be used when I/O suspension is + desired (this operating mode is discussed in the next section). + +term_destination (j_compress_ptr cinfo) + Terminate destination --- called by jpeg_finish_compress() after all + data has been written. In most applications, this must flush any + data remaining in the buffer. Use either next_output_byte or + free_in_buffer to determine how much data is in the buffer. + +term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you +want the destination manager to be cleaned up during an abort, you must do it +yourself. + +You will also need code to create a jpeg_destination_mgr struct, fill in its +method pointers, and insert a pointer to the struct into the "dest" field of +the JPEG compression object. This can be done in-line in your setup code if +you like, but it's probably cleaner to provide a separate routine similar to +the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination +managers. + +Decompression source managers follow a parallel design, but with some +additional frammishes. The source manager struct contains a pointer and count +defining the next byte to read from the work buffer and the number of bytes +remaining: + + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is emptied. The manager's fill_input_buffer method must reset the pointer and +count. In most applications, the manager must remember the buffer's starting +address and total size in private fields not visible to the library. + +A data source manager provides five methods: + +init_source (j_decompress_ptr cinfo) + Initialize source. This is called by jpeg_read_header() before any + data is actually read. Unlike init_destination(), it may leave + bytes_in_buffer set to 0 (in which case a fill_input_buffer() call + will occur immediately). + +fill_input_buffer (j_decompress_ptr cinfo) + This is called whenever bytes_in_buffer has reached zero and more + data is wanted. In typical applications, it should read fresh data + into the buffer (ignoring the current state of next_input_byte and + bytes_in_buffer), reset the pointer & count to the start of the + buffer, and return TRUE indicating that the buffer has been reloaded. + It is not necessary to fill the buffer entirely, only to obtain at + least one more byte. bytes_in_buffer MUST be set to a positive value + if TRUE is returned. A FALSE return should only be used when I/O + suspension is desired (this mode is discussed in the next section). + +skip_input_data (j_decompress_ptr cinfo, long num_bytes) + Skip num_bytes worth of data. The buffer pointer and count should + be advanced over num_bytes input bytes, refilling the buffer as + needed. This is used to skip over a potentially large amount of + uninteresting data (such as an APPn marker). In some applications + it may be possible to optimize away the reading of the skipped data, + but it's not clear that being smart is worth much trouble; large + skips are uncommon. bytes_in_buffer may be zero on return. + A zero or negative skip count should be treated as a no-op. + +resync_to_restart (j_decompress_ptr cinfo, int desired) + This routine is called only when the decompressor has failed to find + a restart (RSTn) marker where one is expected. Its mission is to + find a suitable point for resuming decompression. For most + applications, we recommend that you just use the default resync + procedure, jpeg_resync_to_restart(). However, if you are able to back + up in the input data stream, or if you have a-priori knowledge about + the likely location of restart markers, you may be able to do better. + Read the read_restart_marker() and jpeg_resync_to_restart() routines + in jdmarker.c if you think you'd like to implement your own resync + procedure. + +term_source (j_decompress_ptr cinfo) + Terminate source --- called by jpeg_finish_decompress() after all + data has been read. Often a no-op. + +For both fill_input_buffer() and skip_input_data(), there is no such thing +as an EOF return. If the end of the file has been reached, the routine has +a choice of exiting via ERREXIT() or inserting fake data into the buffer. +In most cases, generating a warning message and inserting a fake EOI marker +is the best course of action --- this will allow the decompressor to output +however much of the image is there. In pathological cases, the decompressor +may swallow the EOI and again demand data ... just keep feeding it fake EOIs. +jdatasrc.c illustrates the recommended error recovery behavior. + +term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want +the source manager to be cleaned up during an abort, you must do it yourself. + +You will also need code to create a jpeg_source_mgr struct, fill in its method +pointers, and insert a pointer to the struct into the "src" field of the JPEG +decompression object. This can be done in-line in your setup code if you +like, but it's probably cleaner to provide a separate routine similar to the +jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers. + +For more information, consult the memory and stdio source and destination +managers in jdatasrc.c and jdatadst.c. + + +I/O suspension +-------------- + +Some applications need to use the JPEG library as an incremental memory-to- +memory filter: when the compressed data buffer is filled or emptied, they want +control to return to the outer loop, rather than expecting that the buffer can +be emptied or reloaded within the data source/destination manager subroutine. +The library supports this need by providing an "I/O suspension" mode, which we +describe in this section. + +The I/O suspension mode is not a panacea: nothing is guaranteed about the +maximum amount of time spent in any one call to the library, so it will not +eliminate response-time problems in single-threaded applications. If you +need guaranteed response time, we suggest you "bite the bullet" and implement +a real multi-tasking capability. + +To use I/O suspension, cooperation is needed between the calling application +and the data source or destination manager; you will always need a custom +source/destination manager. (Please read the previous section if you haven't +already.) The basic idea is that the empty_output_buffer() or +fill_input_buffer() routine is a no-op, merely returning FALSE to indicate +that it has done nothing. Upon seeing this, the JPEG library suspends +operation and returns to its caller. The surrounding application is +responsible for emptying or refilling the work buffer before calling the +JPEG library again. + +Compression suspension: + +For compression suspension, use an empty_output_buffer() routine that returns +FALSE; typically it will not do anything else. This will cause the +compressor to return to the caller of jpeg_write_scanlines(), with the return +value indicating that not all the supplied scanlines have been accepted. +The application must make more room in the output buffer, adjust the output +buffer pointer/count appropriately, and then call jpeg_write_scanlines() +again, pointing to the first unconsumed scanline. + +When forced to suspend, the compressor will backtrack to a convenient stopping +point (usually the start of the current MCU); it will regenerate some output +data when restarted. Therefore, although empty_output_buffer() is only +called when the buffer is filled, you should NOT write out the entire buffer +after a suspension. Write only the data up to the current position of +next_output_byte/free_in_buffer. The data beyond that point will be +regenerated after resumption. + +Because of the backtracking behavior, a good-size output buffer is essential +for efficiency; you don't want the compressor to suspend often. (In fact, an +overly small buffer could lead to infinite looping, if a single MCU required +more data than would fit in the buffer.) We recommend a buffer of at least +several Kbytes. You may want to insert explicit code to ensure that you don't +call jpeg_write_scanlines() unless there is a reasonable amount of space in +the output buffer; in other words, flush the buffer before trying to compress +more data. + +The compressor does not allow suspension while it is trying to write JPEG +markers at the beginning and end of the file. This means that: + * At the beginning of a compression operation, there must be enough free + space in the output buffer to hold the header markers (typically 600 or + so bytes). The recommended buffer size is bigger than this anyway, so + this is not a problem as long as you start with an empty buffer. However, + this restriction might catch you if you insert large special markers, such + as a JFIF thumbnail image, without flushing the buffer afterwards. + * When you call jpeg_finish_compress(), there must be enough space in the + output buffer to emit any buffered data and the final EOI marker. In the + current implementation, half a dozen bytes should suffice for this, but + for safety's sake we recommend ensuring that at least 100 bytes are free + before calling jpeg_finish_compress(). + +A more significant restriction is that jpeg_finish_compress() cannot suspend. +This means you cannot use suspension with multi-pass operating modes, namely +Huffman code optimization and multiple-scan output. Those modes write the +whole file during jpeg_finish_compress(), which will certainly result in +buffer overrun. (Note that this restriction applies only to compression, +not decompression. The decompressor supports input suspension in all of its +operating modes.) + +Decompression suspension: + +For decompression suspension, use a fill_input_buffer() routine that simply +returns FALSE (except perhaps during error recovery, as discussed below). +This will cause the decompressor to return to its caller with an indication +that suspension has occurred. This can happen at four places: + * jpeg_read_header(): will return JPEG_SUSPENDED. + * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE. + * jpeg_read_scanlines(): will return the number of scanlines already + completed (possibly 0). + * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE. +The surrounding application must recognize these cases, load more data into +the input buffer, and repeat the call. In the case of jpeg_read_scanlines(), +increment the passed pointers past any scanlines successfully read. + +Just as with compression, the decompressor will typically backtrack to a +convenient restart point before suspending. When fill_input_buffer() is +called, next_input_byte/bytes_in_buffer point to the current restart point, +which is where the decompressor will backtrack to if FALSE is returned. +The data beyond that position must NOT be discarded if you suspend; it needs +to be re-read upon resumption. In most implementations, you'll need to shift +this data down to the start of your work buffer and then load more data after +it. Again, this behavior means that a several-Kbyte work buffer is essential +for decent performance; furthermore, you should load a reasonable amount of +new data before resuming decompression. (If you loaded, say, only one new +byte each time around, you could waste a LOT of cycles.) + +The skip_input_data() source manager routine requires special care in a +suspension scenario. This routine is NOT granted the ability to suspend the +decompressor; it can decrement bytes_in_buffer to zero, but no more. If the +requested skip distance exceeds the amount of data currently in the input +buffer, then skip_input_data() must set bytes_in_buffer to zero and record the +additional skip distance somewhere else. The decompressor will immediately +call fill_input_buffer(), which should return FALSE, which will cause a +suspension return. The surrounding application must then arrange to discard +the recorded number of bytes before it resumes loading the input buffer. +(Yes, this design is rather baroque, but it avoids complexity in the far more +common case where a non-suspending source manager is used.) + +If the input data has been exhausted, we recommend that you emit a warning +and insert dummy EOI markers just as a non-suspending data source manager +would do. This can be handled either in the surrounding application logic or +within fill_input_buffer(); the latter is probably more efficient. If +fill_input_buffer() knows that no more data is available, it can set the +pointer/count to point to a dummy EOI marker and then return TRUE just as +though it had read more data in a non-suspending situation. + +The decompressor does not attempt to suspend within standard JPEG markers; +instead it will backtrack to the start of the marker and reprocess the whole +marker next time. Hence the input buffer must be large enough to hold the +longest standard marker in the file. Standard JPEG markers should normally +not exceed a few hundred bytes each (DHT tables are typically the longest). +We recommend at least a 2K buffer for performance reasons, which is much +larger than any correct marker is likely to be. For robustness against +damaged marker length counts, you may wish to insert a test in your +application for the case that the input buffer is completely full and yet +the decoder has suspended without consuming any data --- otherwise, if this +situation did occur, it would lead to an endless loop. (The library can't +provide this test since it has no idea whether "the buffer is full", or +even whether there is a fixed-size input buffer.) + +The input buffer would need to be 64K to allow for arbitrary COM or APPn +markers, but these are handled specially: they are either saved into allocated +memory, or skipped over by calling skip_input_data(). In the former case, +suspension is handled correctly, and in the latter case, the problem of +buffer overrun is placed on skip_input_data's shoulders, as explained above. +Note that if you provide your own marker handling routine for large markers, +you should consider how to deal with buffer overflow. + +Multiple-buffer management: + +In some applications it is desirable to store the compressed data in a linked +list of buffer areas, so as to avoid data copying. This can be handled by +having empty_output_buffer() or fill_input_buffer() set the pointer and count +to reference the next available buffer; FALSE is returned only if no more +buffers are available. Although seemingly straightforward, there is a +pitfall in this approach: the backtrack that occurs when FALSE is returned +could back up into an earlier buffer. For example, when fill_input_buffer() +is called, the current pointer & count indicate the backtrack restart point. +Since fill_input_buffer() will set the pointer and count to refer to a new +buffer, the restart position must be saved somewhere else. Suppose a second +call to fill_input_buffer() occurs in the same library call, and no +additional input data is available, so fill_input_buffer must return FALSE. +If the JPEG library has not moved the pointer/count forward in the current +buffer, then *the correct restart point is the saved position in the prior +buffer*. Prior buffers may be discarded only after the library establishes +a restart point within a later buffer. Similar remarks apply for output into +a chain of buffers. + +The library will never attempt to backtrack over a skip_input_data() call, +so any skipped data can be permanently discarded. You still have to deal +with the case of skipping not-yet-received data, however. + +It's much simpler to use only a single buffer; when fill_input_buffer() is +called, move any unconsumed data (beyond the current pointer/count) down to +the beginning of this buffer and then load new data into the remaining buffer +space. This approach requires a little more data copying but is far easier +to get right. + + +Progressive JPEG support +------------------------ + +Progressive JPEG rearranges the stored data into a series of scans of +increasing quality. In situations where a JPEG file is transmitted across a +slow communications link, a decoder can generate a low-quality image very +quickly from the first scan, then gradually improve the displayed quality as +more scans are received. The final image after all scans are complete is +identical to that of a regular (sequential) JPEG file of the same quality +setting. Progressive JPEG files are often slightly smaller than equivalent +sequential JPEG files, but the possibility of incremental display is the main +reason for using progressive JPEG. + +The IJG encoder library generates progressive JPEG files when given a +suitable "scan script" defining how to divide the data into scans. +Creation of progressive JPEG files is otherwise transparent to the encoder. +Progressive JPEG files can also be read transparently by the decoder library. +If the decoding application simply uses the library as defined above, it +will receive a final decoded image without any indication that the file was +progressive. Of course, this approach does not allow incremental display. +To perform incremental display, an application needs to use the decoder +library's "buffered-image" mode, in which it receives a decoded image +multiple times. + +Each displayed scan requires about as much work to decode as a full JPEG +image of the same size, so the decoder must be fairly fast in relation to the +data transmission rate in order to make incremental display useful. However, +it is possible to skip displaying the image and simply add the incoming bits +to the decoder's coefficient buffer. This is fast because only Huffman +decoding need be done, not IDCT, upsampling, colorspace conversion, etc. +The IJG decoder library allows the application to switch dynamically between +displaying the image and simply absorbing the incoming bits. A properly +coded application can automatically adapt the number of display passes to +suit the time available as the image is received. Also, a final +higher-quality display cycle can be performed from the buffered data after +the end of the file is reached. + +Progressive compression: + +To create a progressive JPEG file (or a multiple-scan sequential JPEG file), +set the scan_info cinfo field to point to an array of scan descriptors, and +perform compression as usual. Instead of constructing your own scan list, +you can call the jpeg_simple_progression() helper routine to create a +recommended progression sequence; this method should be used by all +applications that don't want to get involved in the nitty-gritty of +progressive scan sequence design. (If you want to provide user control of +scan sequences, you may wish to borrow the scan script reading code found +in rdswitch.c, so that you can read scan script files just like cjpeg's.) +When scan_info is not NULL, the compression library will store DCT'd data +into a buffer array as jpeg_write_scanlines() is called, and will emit all +the requested scans during jpeg_finish_compress(). This implies that +multiple-scan output cannot be created with a suspending data destination +manager, since jpeg_finish_compress() does not support suspension. We +should also note that the compressor currently forces Huffman optimization +mode when creating a progressive JPEG file, because the default Huffman +tables are unsuitable for progressive files. + +Progressive decompression: + +When buffered-image mode is not used, the decoder library will read all of +a multi-scan file during jpeg_start_decompress(), so that it can provide a +final decoded image. (Here "multi-scan" means either progressive or +multi-scan sequential.) This makes multi-scan files transparent to the +decoding application. However, existing applications that used suspending +input with version 5 of the IJG library will need to be modified to check +for a suspension return from jpeg_start_decompress(). + +To perform incremental display, an application must use the library's +buffered-image mode. This is described in the next section. + + +Buffered-image mode +------------------- + +In buffered-image mode, the library stores the partially decoded image in a +coefficient buffer, from which it can be read out as many times as desired. +This mode is typically used for incremental display of progressive JPEG files, +but it can be used with any JPEG file. Each scan of a progressive JPEG file +adds more data (more detail) to the buffered image. The application can +display in lockstep with the source file (one display pass per input scan), +or it can allow input processing to outrun display processing. By making +input and display processing run independently, it is possible for the +application to adapt progressive display to a wide range of data transmission +rates. + +The basic control flow for buffered-image decoding is + + jpeg_create_decompress() + set data source + jpeg_read_header() + set overall decompression parameters + cinfo.buffered_image = TRUE; /* select buffered-image mode */ + jpeg_start_decompress() + for (each output pass) { + adjust output decompression parameters if required + jpeg_start_output() /* start a new output pass */ + for (all scanlines in image) { + jpeg_read_scanlines() + display scanlines + } + jpeg_finish_output() /* terminate output pass */ + } + jpeg_finish_decompress() + jpeg_destroy_decompress() + +This differs from ordinary unbuffered decoding in that there is an additional +level of looping. The application can choose how many output passes to make +and how to display each pass. + +The simplest approach to displaying progressive images is to do one display +pass for each scan appearing in the input file. In this case the outer loop +condition is typically + while (! jpeg_input_complete(&cinfo)) +and the start-output call should read + jpeg_start_output(&cinfo, cinfo.input_scan_number); +The second parameter to jpeg_start_output() indicates which scan of the input +file is to be displayed; the scans are numbered starting at 1 for this +purpose. (You can use a loop counter starting at 1 if you like, but using +the library's input scan counter is easier.) The library automatically reads +data as necessary to complete each requested scan, and jpeg_finish_output() +advances to the next scan or end-of-image marker (hence input_scan_number +will be incremented by the time control arrives back at jpeg_start_output()). +With this technique, data is read from the input file only as needed, and +input and output processing run in lockstep. + +After reading the final scan and reaching the end of the input file, the +buffered image remains available; it can be read additional times by +repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output() +sequence. For example, a useful technique is to use fast one-pass color +quantization for display passes made while the image is arriving, followed by +a final display pass using two-pass quantization for highest quality. This +is done by changing the library parameters before the final output pass. +Changing parameters between passes is discussed in detail below. + +In general the last scan of a progressive file cannot be recognized as such +until after it is read, so a post-input display pass is the best approach if +you want special processing in the final pass. + +When done with the image, be sure to call jpeg_finish_decompress() to release +the buffered image (or just use jpeg_destroy_decompress()). + +If input data arrives faster than it can be displayed, the application can +cause the library to decode input data in advance of what's needed to produce +output. This is done by calling the routine jpeg_consume_input(). +The return value is one of the following: + JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan) + JPEG_REACHED_EOI: reached the EOI marker (end of image) + JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data + JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan + JPEG_SUSPENDED: suspended before completing any of the above +(JPEG_SUSPENDED can occur only if a suspending data source is used.) This +routine can be called at any time after initializing the JPEG object. It +reads some additional data and returns when one of the indicated significant +events occurs. (If called after the EOI marker is reached, it will +immediately return JPEG_REACHED_EOI without attempting to read more data.) + +The library's output processing will automatically call jpeg_consume_input() +whenever the output processing overtakes the input; thus, simple lockstep +display requires no direct calls to jpeg_consume_input(). But by adding +calls to jpeg_consume_input(), you can absorb data in advance of what is +being displayed. This has two benefits: + * You can limit buildup of unprocessed data in your input buffer. + * You can eliminate extra display passes by paying attention to the + state of the library's input processing. + +The first of these benefits only requires interspersing calls to +jpeg_consume_input() with your display operations and any other processing +you may be doing. To avoid wasting cycles due to backtracking, it's best to +call jpeg_consume_input() only after a hundred or so new bytes have arrived. +This is discussed further under "I/O suspension", above. (Note: the JPEG +library currently is not thread-safe. You must not call jpeg_consume_input() +from one thread of control if a different library routine is working on the +same JPEG object in another thread.) + +When input arrives fast enough that more than one new scan is available +before you start a new output pass, you may as well skip the output pass +corresponding to the completed scan. This occurs for free if you pass +cinfo.input_scan_number as the target scan number to jpeg_start_output(). +The input_scan_number field is simply the index of the scan currently being +consumed by the input processor. You can ensure that this is up-to-date by +emptying the input buffer just before calling jpeg_start_output(): call +jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or +JPEG_REACHED_EOI. + +The target scan number passed to jpeg_start_output() is saved in the +cinfo.output_scan_number field. The library's output processing calls +jpeg_consume_input() whenever the current input scan number and row within +that scan is less than or equal to the current output scan number and row. +Thus, input processing can "get ahead" of the output processing but is not +allowed to "fall behind". You can achieve several different effects by +manipulating this interlock rule. For example, if you pass a target scan +number greater than the current input scan number, the output processor will +wait until that scan starts to arrive before producing any output. (To avoid +an infinite loop, the target scan number is automatically reset to the last +scan number when the end of image is reached. Thus, if you specify a large +target scan number, the library will just absorb the entire input file and +then perform an output pass. This is effectively the same as what +jpeg_start_decompress() does when you don't select buffered-image mode.) +When you pass a target scan number equal to the current input scan number, +the image is displayed no faster than the current input scan arrives. The +final possibility is to pass a target scan number less than the current input +scan number; this disables the input/output interlock and causes the output +processor to simply display whatever it finds in the image buffer, without +waiting for input. (However, the library will not accept a target scan +number less than one, so you can't avoid waiting for the first scan.) + +When data is arriving faster than the output display processing can advance +through the image, jpeg_consume_input() will store data into the buffered +image beyond the point at which the output processing is reading data out +again. If the input arrives fast enough, it may "wrap around" the buffer to +the point where the input is more than one whole scan ahead of the output. +If the output processing simply proceeds through its display pass without +paying attention to the input, the effect seen on-screen is that the lower +part of the image is one or more scans better in quality than the upper part. +Then, when the next output scan is started, you have a choice of what target +scan number to use. The recommended choice is to use the current input scan +number at that time, which implies that you've skipped the output scans +corresponding to the input scans that were completed while you processed the +previous output scan. In this way, the decoder automatically adapts its +speed to the arriving data, by skipping output scans as necessary to keep up +with the arriving data. + +When using this strategy, you'll want to be sure that you perform a final +output pass after receiving all the data; otherwise your last display may not +be full quality across the whole screen. So the right outer loop logic is +something like this: + do { + absorb any waiting input by calling jpeg_consume_input() + final_pass = jpeg_input_complete(&cinfo); + adjust output decompression parameters if required + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + } while (! final_pass); +rather than quitting as soon as jpeg_input_complete() returns TRUE. This +arrangement makes it simple to use higher-quality decoding parameters +for the final pass. But if you don't want to use special parameters for +the final pass, the right loop logic is like this: + for (;;) { + absorb any waiting input by calling jpeg_consume_input() + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + if (jpeg_input_complete(&cinfo) && + cinfo.input_scan_number == cinfo.output_scan_number) + break; + } +In this case you don't need to know in advance whether an output pass is to +be the last one, so it's not necessary to have reached EOF before starting +the final output pass; rather, what you want to test is whether the output +pass was performed in sync with the final input scan. This form of the loop +will avoid an extra output pass whenever the decoder is able (or nearly able) +to keep up with the incoming data. + +When the data transmission speed is high, you might begin a display pass, +then find that much or all of the file has arrived before you can complete +the pass. (You can detect this by noting the JPEG_REACHED_EOI return code +from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().) +In this situation you may wish to abort the current display pass and start a +new one using the newly arrived information. To do so, just call +jpeg_finish_output() and then start a new pass with jpeg_start_output(). + +A variant strategy is to abort and restart display if more than one complete +scan arrives during an output pass; this can be detected by noting +JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This +idea should be employed with caution, however, since the display process +might never get to the bottom of the image before being aborted, resulting +in the lower part of the screen being several passes worse than the upper. +In most cases it's probably best to abort an output pass only if the whole +file has arrived and you want to begin the final output pass immediately. + +When receiving data across a communication link, we recommend always using +the current input scan number for the output target scan number; if a +higher-quality final pass is to be done, it should be started (aborting any +incomplete output pass) as soon as the end of file is received. However, +many other strategies are possible. For example, the application can examine +the parameters of the current input scan and decide whether to display it or +not. If the scan contains only chroma data, one might choose not to use it +as the target scan, expecting that the scan will be small and will arrive +quickly. To skip to the next scan, call jpeg_consume_input() until it +returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher +number as the target scan for jpeg_start_output(); but that method doesn't +let you inspect the next scan's parameters before deciding to display it. + + +In buffered-image mode, jpeg_start_decompress() never performs input and +thus never suspends. An application that uses input suspension with +buffered-image mode must be prepared for suspension returns from these +routines: +* jpeg_start_output() performs input only if you request 2-pass quantization + and the target scan isn't fully read yet. (This is discussed below.) +* jpeg_read_scanlines(), as always, returns the number of scanlines that it + was able to produce before suspending. +* jpeg_finish_output() will read any markers following the target scan, + up to the end of the file or the SOS marker that begins another scan. + (But it reads no input if jpeg_consume_input() has already reached the + end of the file or a SOS marker beyond the target output scan.) +* jpeg_finish_decompress() will read until the end of file, and thus can + suspend if the end hasn't already been reached (as can be tested by + calling jpeg_input_complete()). +jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress() +all return TRUE if they completed their tasks, FALSE if they had to suspend. +In the event of a FALSE return, the application must load more input data +and repeat the call. Applications that use non-suspending data sources need +not check the return values of these three routines. + + +It is possible to change decoding parameters between output passes in the +buffered-image mode. The decoder library currently supports only very +limited changes of parameters. ONLY THE FOLLOWING parameter changes are +allowed after jpeg_start_decompress() is called: +* dct_method can be changed before each call to jpeg_start_output(). + For example, one could use a fast DCT method for early scans, changing + to a higher quality method for the final scan. +* dither_mode can be changed before each call to jpeg_start_output(); + of course this has no impact if not using color quantization. Typically + one would use ordered dither for initial passes, then switch to + Floyd-Steinberg dither for the final pass. Caution: changing dither mode + can cause more memory to be allocated by the library. Although the amount + of memory involved is not large (a scanline or so), it may cause the + initial max_memory_to_use specification to be exceeded, which in the worst + case would result in an out-of-memory failure. +* do_block_smoothing can be changed before each call to jpeg_start_output(). + This setting is relevant only when decoding a progressive JPEG image. + During the first DC-only scan, block smoothing provides a very "fuzzy" look + instead of the very "blocky" look seen without it; which is better seems a + matter of personal taste. But block smoothing is nearly always a win + during later stages, especially when decoding a successive-approximation + image: smoothing helps to hide the slight blockiness that otherwise shows + up on smooth gradients until the lowest coefficient bits are sent. +* Color quantization mode can be changed under the rules described below. + You *cannot* change between full-color and quantized output (because that + would alter the required I/O buffer sizes), but you can change which + quantization method is used. + +When generating color-quantized output, changing quantization method is a +very useful way of switching between high-speed and high-quality display. +The library allows you to change among its three quantization methods: +1. Single-pass quantization to a fixed color cube. + Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL. +2. Single-pass quantization to an application-supplied colormap. + Selected by setting cinfo.colormap to point to the colormap (the value of + two_pass_quantize is ignored); also set cinfo.actual_number_of_colors. +3. Two-pass quantization to a colormap chosen specifically for the image. + Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL. + (This is the default setting selected by jpeg_read_header, but it is + probably NOT what you want for the first pass of progressive display!) +These methods offer successively better quality and lesser speed. However, +only the first method is available for quantizing in non-RGB color spaces. + +IMPORTANT: because the different quantizer methods have very different +working-storage requirements, the library requires you to indicate which +one(s) you intend to use before you call jpeg_start_decompress(). (If we did +not require this, the max_memory_to_use setting would be a complete fiction.) +You do this by setting one or more of these three cinfo fields to TRUE: + enable_1pass_quant Fixed color cube colormap + enable_external_quant Externally-supplied colormap + enable_2pass_quant Two-pass custom colormap +All three are initialized FALSE by jpeg_read_header(). But +jpeg_start_decompress() automatically sets TRUE the one selected by the +current two_pass_quantize and colormap settings, so you only need to set the +enable flags for any other quantization methods you plan to change to later. + +After setting the enable flags correctly at jpeg_start_decompress() time, you +can change to any enabled quantization method by setting two_pass_quantize +and colormap properly just before calling jpeg_start_output(). The following +special rules apply: +1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass + or 2-pass mode from a different mode, or when you want the 2-pass + quantizer to be re-run to generate a new colormap. +2. To switch to an external colormap, or to change to a different external + colormap than was used on the prior pass, you must call + jpeg_new_colormap() after setting cinfo.colormap. +NOTE: if you want to use the same colormap as was used in the prior pass, +you should not do either of these things. This will save some nontrivial +switchover costs. +(These requirements exist because cinfo.colormap will always be non-NULL +after completing a prior output pass, since both the 1-pass and 2-pass +quantizers set it to point to their output colormaps. Thus you have to +do one of these two things to notify the library that something has changed. +Yup, it's a bit klugy, but it's necessary to do it this way for backwards +compatibility.) + +Note that in buffered-image mode, the library generates any requested colormap +during jpeg_start_output(), not during jpeg_start_decompress(). + +When using two-pass quantization, jpeg_start_output() makes a pass over the +buffered image to determine the optimum color map; it therefore may take a +significant amount of time, whereas ordinarily it does little work. The +progress monitor hook is called during this pass, if defined. It is also +important to realize that if the specified target scan number is greater than +or equal to the current input scan number, jpeg_start_output() will attempt +to consume input as it makes this pass. If you use a suspending data source, +you need to check for a FALSE return from jpeg_start_output() under these +conditions. The combination of 2-pass quantization and a not-yet-fully-read +target scan is the only case in which jpeg_start_output() will consume input. + + +Application authors who support buffered-image mode may be tempted to use it +for all JPEG images, even single-scan ones. This will work, but it is +inefficient: there is no need to create an image-sized coefficient buffer for +single-scan images. Requesting buffered-image mode for such an image wastes +memory. Worse, it can cost time on large images, since the buffered data has +to be swapped out or written to a temporary file. If you are concerned about +maximum performance on baseline JPEG files, you should use buffered-image +mode only when the incoming file actually has multiple scans. This can be +tested by calling jpeg_has_multiple_scans(), which will return a correct +result at any time after jpeg_read_header() completes. + +It is also worth noting that when you use jpeg_consume_input() to let input +processing get ahead of output processing, the resulting pattern of access to +the coefficient buffer is quite nonsequential. It's best to use the memory +manager jmemnobs.c if you can (ie, if you have enough real or virtual main +memory). If not, at least make sure that max_memory_to_use is set as high as +possible. If the JPEG memory manager has to use a temporary file, you will +probably see a lot of disk traffic and poor performance. (This could be +improved with additional work on the memory manager, but we haven't gotten +around to it yet.) + +In some applications it may be convenient to use jpeg_consume_input() for all +input processing, including reading the initial markers; that is, you may +wish to call jpeg_consume_input() instead of jpeg_read_header() during +startup. This works, but note that you must check for JPEG_REACHED_SOS and +JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes. +Once the first SOS marker has been reached, you must call +jpeg_start_decompress() before jpeg_consume_input() will consume more input; +it'll just keep returning JPEG_REACHED_SOS until you do. If you read a +tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI +without ever returning JPEG_REACHED_SOS; be sure to check for this case. +If this happens, the decompressor will not read any more input until you call +jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not +using buffered-image mode, but in that case it's basically a no-op after the +initial markers have been read: it will just return JPEG_SUSPENDED. + + +Abbreviated datastreams and multiple images +------------------------------------------- + +A JPEG compression or decompression object can be reused to process multiple +images. This saves a small amount of time per image by eliminating the +"create" and "destroy" operations, but that isn't the real purpose of the +feature. Rather, reuse of an object provides support for abbreviated JPEG +datastreams. Object reuse can also simplify processing a series of images in +a single input or output file. This section explains these features. + +A JPEG file normally contains several hundred bytes worth of quantization +and Huffman tables. In a situation where many images will be stored or +transmitted with identical tables, this may represent an annoying overhead. +The JPEG standard therefore permits tables to be omitted. The standard +defines three classes of JPEG datastreams: + * "Interchange" datastreams contain an image and all tables needed to decode + the image. These are the usual kind of JPEG file. + * "Abbreviated image" datastreams contain an image, but are missing some or + all of the tables needed to decode that image. + * "Abbreviated table specification" (henceforth "tables-only") datastreams + contain only table specifications. +To decode an abbreviated image, it is necessary to load the missing table(s) +into the decoder beforehand. This can be accomplished by reading a separate +tables-only file. A variant scheme uses a series of images in which the first +image is an interchange (complete) datastream, while subsequent ones are +abbreviated and rely on the tables loaded by the first image. It is assumed +that once the decoder has read a table, it will remember that table until a +new definition for the same table number is encountered. + +It is the application designer's responsibility to figure out how to associate +the correct tables with an abbreviated image. While abbreviated datastreams +can be useful in a closed environment, their use is strongly discouraged in +any situation where data exchange with other applications might be needed. +Caveat designer. + +The JPEG library provides support for reading and writing any combination of +tables-only datastreams and abbreviated images. In both compression and +decompression objects, a quantization or Huffman table will be retained for +the lifetime of the object, unless it is overwritten by a new table definition. + + +To create abbreviated image datastreams, it is only necessary to tell the +compressor not to emit some or all of the tables it is using. Each +quantization and Huffman table struct contains a boolean field "sent_table", +which normally is initialized to FALSE. For each table used by the image, the +header-writing process emits the table and sets sent_table = TRUE unless it is +already TRUE. (In normal usage, this prevents outputting the same table +definition multiple times, as would otherwise occur because the chroma +components typically share tables.) Thus, setting this field to TRUE before +calling jpeg_start_compress() will prevent the table from being written at +all. + +If you want to create a "pure" abbreviated image file containing no tables, +just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the +tables. If you want to emit some but not all tables, you'll need to set the +individual sent_table fields directly. + +To create an abbreviated image, you must also call jpeg_start_compress() +with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress() +will force all the sent_table fields to FALSE. (This is a safety feature to +prevent abbreviated images from being created accidentally.) + +To create a tables-only file, perform the same parameter setup that you +normally would, but instead of calling jpeg_start_compress() and so on, call +jpeg_write_tables(&cinfo). This will write an abbreviated datastream +containing only SOI, DQT and/or DHT markers, and EOI. All the quantization +and Huffman tables that are currently defined in the compression object will +be emitted unless their sent_tables flag is already TRUE, and then all the +sent_tables flags will be set TRUE. + +A sure-fire way to create matching tables-only and abbreviated image files +is to proceed as follows: + + create JPEG compression object + set JPEG parameters + set destination to tables-only file + jpeg_write_tables(&cinfo); + set destination to image file + jpeg_start_compress(&cinfo, FALSE); + write data... + jpeg_finish_compress(&cinfo); + +Since the JPEG parameters are not altered between writing the table file and +the abbreviated image file, the same tables are sure to be used. Of course, +you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence +many times to produce many abbreviated image files matching the table file. + +You cannot suppress output of the computed Huffman tables when Huffman +optimization is selected. (If you could, there'd be no way to decode the +image...) Generally, you don't want to set optimize_coding = TRUE when +you are trying to produce abbreviated files. + +In some cases you might want to compress an image using tables which are +not stored in the application, but are defined in an interchange or +tables-only file readable by the application. This can be done by setting up +a JPEG decompression object to read the specification file, then copying the +tables into your compression object. See jpeg_copy_critical_parameters() +for an example of copying quantization tables. + + +To read abbreviated image files, you simply need to load the proper tables +into the decompression object before trying to read the abbreviated image. +If the proper tables are stored in the application program, you can just +allocate the table structs and fill in their contents directly. For example, +to load a fixed quantization table into table slot "n": + + if (cinfo.quant_tbl_ptrs[n] == NULL) + cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo); + quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */ + for (i = 0; i < 64; i++) { + /* Qtable[] is desired quantization table, in natural array order */ + quant_ptr->quantval[i] = Qtable[i]; + } + +Code to load a fixed Huffman table is typically (for AC table "n"): + + if (cinfo.ac_huff_tbl_ptrs[n] == NULL) + cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo); + huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */ + for (i = 1; i <= 16; i++) { + /* counts[i] is number of Huffman codes of length i bits, i=1..16 */ + huff_ptr->bits[i] = counts[i]; + } + for (i = 0; i < 256; i++) { + /* symbols[] is the list of Huffman symbols, in code-length order */ + huff_ptr->huffval[i] = symbols[i]; + } + +(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a +constant JQUANT_TBL object is not safe. If the incoming file happened to +contain a quantization table definition, your master table would get +overwritten! Instead allocate a working table copy and copy the master table +into it, as illustrated above. Ditto for Huffman tables, of course.) + +You might want to read the tables from a tables-only file, rather than +hard-wiring them into your application. The jpeg_read_header() call is +sufficient to read a tables-only file. You must pass a second parameter of +FALSE to indicate that you do not require an image to be present. Thus, the +typical scenario is + + create JPEG decompression object + set source to tables-only file + jpeg_read_header(&cinfo, FALSE); + set source to abbreviated image file + jpeg_read_header(&cinfo, TRUE); + set decompression parameters + jpeg_start_decompress(&cinfo); + read data... + jpeg_finish_decompress(&cinfo); + +In some cases, you may want to read a file without knowing whether it contains +an image or just tables. In that case, pass FALSE and check the return value +from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found, +JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value, +JPEG_SUSPENDED, is possible when using a suspending data source manager.) +Note that jpeg_read_header() will not complain if you read an abbreviated +image for which you haven't loaded the missing tables; the missing-table check +occurs later, in jpeg_start_decompress(). + + +It is possible to read a series of images from a single source file by +repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence, +without releasing/recreating the JPEG object or the data source module. +(If you did reinitialize, any partial bufferload left in the data source +buffer at the end of one image would be discarded, causing you to lose the +start of the next image.) When you use this method, stored tables are +automatically carried forward, so some of the images can be abbreviated images +that depend on tables from earlier images. + +If you intend to write a series of images into a single destination file, +you might want to make a specialized data destination module that doesn't +flush the output buffer at term_destination() time. This would speed things +up by some trifling amount. Of course, you'd need to remember to flush the +buffer after the last image. You can make the later images be abbreviated +ones by passing FALSE to jpeg_start_compress(). + + +Special markers +--------------- + +Some applications may need to insert or extract special data in the JPEG +datastream. The JPEG standard provides marker types "COM" (comment) and +"APP0" through "APP15" (application) to hold application-specific data. +Unfortunately, the use of these markers is not specified by the standard. +COM markers are fairly widely used to hold user-supplied text. The JFIF file +format spec uses APP0 markers with specified initial strings to hold certain +data. Adobe applications use APP14 markers beginning with the string "Adobe" +for miscellaneous data. Other APPn markers are rarely seen, but might +contain almost anything. + +If you wish to store user-supplied text, we recommend you use COM markers +and place readable 7-bit ASCII text in them. Newline conventions are not +standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR +(Mac style). A robust COM reader should be able to cope with random binary +garbage, including nulls, since some applications generate COM markers +containing non-ASCII junk. (But yours should not be one of them.) + +For program-supplied data, use an APPn marker, and be sure to begin it with an +identifying string so that you can tell whether the marker is actually yours. +It's probably best to avoid using APP0 or APP14 for any private markers. +(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you +not use APP8 markers for any private purposes, either.) + +Keep in mind that at most 65533 bytes can be put into one marker, but you +can have as many markers as you like. + +By default, the IJG compression library will write a JFIF APP0 marker if the +selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if +the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but +we don't recommend it. The decompression library will recognize JFIF and +Adobe markers and will set the JPEG colorspace properly when one is found. + + +You can write special markers immediately following the datastream header by +calling jpeg_write_marker() after jpeg_start_compress() and before the first +call to jpeg_write_scanlines(). When you do this, the markers appear after +the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before +all else. Specify the marker type parameter as "JPEG_COM" for COM or +"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write +any marker type, but we don't recommend writing any other kinds of marker.) +For example, to write a user comment string pointed to by comment_text: + jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text)); + +If it's not convenient to store all the marker data in memory at once, +you can instead call jpeg_write_m_header() followed by multiple calls to +jpeg_write_m_byte(). If you do it this way, it's your responsibility to +call jpeg_write_m_byte() exactly the number of times given in the length +parameter to jpeg_write_m_header(). (This method lets you empty the +output buffer partway through a marker, which might be important when +using a suspending data destination module. In any case, if you are using +a suspending destination, you should flush its buffer after inserting +any special markers. See "I/O suspension".) + +Or, if you prefer to synthesize the marker byte sequence yourself, +you can just cram it straight into the data destination module. + +If you are writing JFIF 1.02 extension markers (thumbnail images), don't +forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the +correct JFIF version number in the JFIF header marker. The library's default +is to write version 1.01, but that's wrong if you insert any 1.02 extension +markers. (We could probably get away with just defaulting to 1.02, but there +used to be broken decoders that would complain about unknown minor version +numbers. To reduce compatibility risks it's safest not to write 1.02 unless +you are actually using 1.02 extensions.) + + +When reading, two methods of handling special markers are available: +1. You can ask the library to save the contents of COM and/or APPn markers +into memory, and then examine them at your leisure afterwards. +2. You can supply your own routine to process COM and/or APPn markers +on-the-fly as they are read. +The first method is simpler to use, especially if you are using a suspending +data source; writing a marker processor that copes with input suspension is +not easy (consider what happens if the marker is longer than your available +input buffer). However, the second method conserves memory since the marker +data need not be kept around after it's been processed. + +For either method, you'd normally set up marker handling after creating a +decompression object and before calling jpeg_read_header(), because the +markers of interest will typically be near the head of the file and so will +be scanned by jpeg_read_header. Once you've established a marker handling +method, it will be used for the life of that decompression object +(potentially many datastreams), unless you change it. Marker handling is +determined separately for COM markers and for each APPn marker code. + + +To save the contents of special markers in memory, call + jpeg_save_markers(cinfo, marker_code, length_limit) +where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n. +(To arrange to save all the special marker types, you need to call this +routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer +than length_limit data bytes, only length_limit bytes will be saved; this +parameter allows you to avoid chewing up memory when you only need to see the +first few bytes of a potentially large marker. If you want to save all the +data, set length_limit to 0xFFFF; that is enough since marker lengths are only +16 bits. As a special case, setting length_limit to 0 prevents that marker +type from being saved at all. (That is the default behavior, in fact.) + +After jpeg_read_header() completes, you can examine the special markers by +following the cinfo->marker_list pointer chain. All the special markers in +the file appear in this list, in order of their occurrence in the file (but +omitting any markers of types you didn't ask for). Both the original data +length and the saved data length are recorded for each list entry; the latter +will not exceed length_limit for the particular marker type. Note that these +lengths exclude the marker length word, whereas the stored representation +within the JPEG file includes it. (Hence the maximum data length is really +only 65533.) + +It is possible that additional special markers appear in the file beyond the +SOS marker at which jpeg_read_header stops; if so, the marker list will be +extended during reading of the rest of the file. This is not expected to be +common, however. If you are short on memory you may want to reset the length +limit to zero for all marker types after finishing jpeg_read_header, to +ensure that the max_memory_to_use setting cannot be exceeded due to addition +of later markers. + +The marker list remains stored until you call jpeg_finish_decompress or +jpeg_abort, at which point the memory is freed and the list is set to empty. +(jpeg_destroy also releases the storage, of course.) + +Note that the library is internally interested in APP0 and APP14 markers; +if you try to set a small nonzero length limit on these types, the library +will silently force the length up to the minimum it wants. (But you can set +a zero length limit to prevent them from being saved at all.) Also, in a +16-bit environment, the maximum length limit may be constrained to less than +65533 by malloc() limitations. It is therefore best not to assume that the +effective length limit is exactly what you set it to be. + + +If you want to supply your own marker-reading routine, you do it by calling +jpeg_set_marker_processor(). A marker processor routine must have the +signature + boolean jpeg_marker_parser_method (j_decompress_ptr cinfo) +Although the marker code is not explicitly passed, the routine can find it +in cinfo->unread_marker. At the time of call, the marker proper has been +read from the data source module. The processor routine is responsible for +reading the marker length word and the remaining parameter bytes, if any. +Return TRUE to indicate success. (FALSE should be returned only if you are +using a suspending data source and it tells you to suspend. See the standard +marker processors in jdmarker.c for appropriate coding methods if you need to +use a suspending data source.) + +If you override the default APP0 or APP14 processors, it is up to you to +recognize JFIF and Adobe markers if you want colorspace recognition to occur +properly. We recommend copying and extending the default processors if you +want to do that. (A better idea is to save these marker types for later +examination by calling jpeg_save_markers(); that method doesn't interfere +with the library's own processing of these markers.) + +jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive +--- if you call one it overrides any previous call to the other, for the +particular marker type specified. + +A simple example of an external COM processor can be found in djpeg.c. +Also, see jpegtran.c for an example of using jpeg_save_markers. + + +Raw (downsampled) image data +---------------------------- + +Some applications need to supply already-downsampled image data to the JPEG +compressor, or to receive raw downsampled data from the decompressor. The +library supports this requirement by allowing the application to write or +read raw data, bypassing the normal preprocessing or postprocessing steps. +The interface is different from the standard one and is somewhat harder to +use. If your interest is merely in bypassing color conversion, we recommend +that you use the standard interface and simply set jpeg_color_space = +in_color_space (or jpeg_color_space = out_color_space for decompression). +The mechanism described in this section is necessary only to supply or +receive downsampled image data, in which not all components have the same +dimensions. + + +To compress raw data, you must supply the data in the colorspace to be used +in the JPEG file (please read the earlier section on Special color spaces) +and downsampled to the sampling factors specified in the JPEG parameters. +You must supply the data in the format used internally by the JPEG library, +namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional +arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one +color component. This structure is necessary since the components are of +different sizes. If the image dimensions are not a multiple of the MCU size, +you must also pad the data correctly (usually, this is done by replicating +the last column and/or row). The data must be padded to a multiple of a DCT +block in each component: that is, each downsampled row must contain a +multiple of DCT_h_scaled_size valid samples, and there must be a multiple of +DCT_v_scaled_size sample rows for each component. (For applications such as +conversion of digital TV images, the standard image size is usually a +multiple of the DCT block size, so that no padding need actually be done.) + +The procedure for compression of raw data is basically the same as normal +compression, except that you call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do +the following: + * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().) + This notifies the library that you will be supplying raw data. + * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace() + call is a good idea. Note that since color conversion is bypassed, + in_color_space is ignored, except that jpeg_set_defaults() uses it to + choose the default jpeg_color_space setting. + * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and + cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the + dimensions of the data you are supplying, it's wise to set them + explicitly, rather than assuming the library's defaults are what you want. + +To pass raw data to the library, call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). The two routines work similarly except that +jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY. +The scanlines count passed to and returned from jpeg_write_raw_data is +measured in terms of the component with the largest v_samp_factor. + +jpeg_write_raw_data() processes one MCU row per call, which is to say +v_samp_factor*min_DCT_v_scaled_size sample rows of each component. The passed +num_lines value must be at least max_v_samp_factor*min_DCT_v_scaled_size, and +the return value will be exactly that amount (or possibly some multiple of +that amount, in future library versions). This is true even on the last call +at the bottom of the image; don't forget to pad your data as necessary. + +The required dimensions of the supplied data can be computed for each +component as + cinfo->comp_info[i].width_in_blocks * + cinfo->comp_info[i].DCT_h_scaled_size samples per row + cinfo->comp_info[i].height_in_blocks * + cinfo->comp_info[i].DCT_v_scaled_size rows in image +after jpeg_start_compress() has initialized those fields. If the valid data +is smaller than this, it must be padded appropriately. For some sampling +factors and image sizes, additional dummy DCT blocks are inserted to make +the image a multiple of the MCU dimensions. The library creates such dummy +blocks itself; it does not read them from your supplied data. Therefore you +need never pad by more than DCT_scaled_size samples. +An example may help here. Assume 2h2v downsampling of YCbCr data, that is + cinfo->comp_info[0].h_samp_factor = 2 for Y + cinfo->comp_info[0].v_samp_factor = 2 + cinfo->comp_info[1].h_samp_factor = 1 for Cb + cinfo->comp_info[1].v_samp_factor = 1 + cinfo->comp_info[2].h_samp_factor = 1 for Cr + cinfo->comp_info[2].v_samp_factor = 1 +and suppose that the nominal image dimensions (cinfo->image_width and +cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will +compute downsampled_width = 101 and width_in_blocks = 13 for Y, +downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same +for the height fields). You must pad the Y data to at least 13*8 = 104 +columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The +MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16 +scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual +sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed, +so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row +of Y data is dummy, so it doesn't matter what you pass for it in the data +arrays, but the scanlines count must total up to 112 so that all of the Cb +and Cr data gets passed. + +Output suspension is supported with raw-data compression: if the data +destination module suspends, jpeg_write_raw_data() will return 0. +In this case the same data rows must be passed again on the next call. + + +Decompression with raw data output implies bypassing all postprocessing: +you cannot ask for color quantization, for instance. More seriously, you +must deal with the color space and sampling factors present in the incoming +file. If your application only handles, say, 2h1v YCbCr data, you must +check for and fail on other color spaces or other sampling factors. +The library will not convert to a different color space for you. + +To obtain raw data output, set cinfo->raw_data_out = TRUE before +jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to +verify that the color space and sampling factors are ones you can handle. +Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The +decompression process is otherwise the same as usual. + +jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a +buffer of at least max_v_samp_factor*min_DCT_v_scaled_size scanlines (scanline +counting is the same as for raw-data compression). The buffer you pass must +be large enough to hold the actual data plus padding to DCT-block boundaries. +As with compression, any entirely dummy DCT blocks are not processed so you +need not allocate space for them, but the total scanline count includes them. +The above example of computing buffer dimensions for raw-data compression is +equally valid for decompression. + +Input suspension is supported with raw-data decompression: if the data source +module suspends, jpeg_read_raw_data() will return 0. You can also use +buffered-image mode to read raw data in multiple passes. + + +Really raw data: DCT coefficients +--------------------------------- + +It is possible to read or write the contents of a JPEG file as raw DCT +coefficients. This facility is mainly intended for use in lossless +transcoding between different JPEG file formats. Other possible applications +include lossless cropping of a JPEG image, lossless reassembly of a +multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc. + +To read the contents of a JPEG file as DCT coefficients, open the file and do +jpeg_read_header() as usual. But instead of calling jpeg_start_decompress() +and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the +entire image into a set of virtual coefficient-block arrays, one array per +component. The return value is a pointer to an array of virtual-array +descriptors. Each virtual array can be accessed directly using the JPEG +memory manager's access_virt_barray method (see Memory management, below, +and also read structure.txt's discussion of virtual array handling). Or, +for simple transcoding to a different JPEG file format, the array list can +just be handed directly to jpeg_write_coefficients(). + +Each block in the block arrays contains quantized coefficient values in +normal array order (not JPEG zigzag order). The block arrays contain only +DCT blocks containing real data; any entirely-dummy blocks added to fill out +interleaved MCUs at the right or bottom edges of the image are discarded +during reading and are not stored in the block arrays. (The size of each +block array can be determined from the width_in_blocks and height_in_blocks +fields of the component's comp_info entry.) This is also the data format +expected by jpeg_write_coefficients(). + +When you are done using the virtual arrays, call jpeg_finish_decompress() +to release the array storage and return the decompression object to an idle +state; or just call jpeg_destroy() if you don't need to reuse the object. + +If you use a suspending data source, jpeg_read_coefficients() will return +NULL if it is forced to suspend; a non-NULL return value indicates successful +completion. You need not test for a NULL return value when using a +non-suspending data source. + +It is also possible to call jpeg_read_coefficients() to obtain access to the +decoder's coefficient arrays during a normal decode cycle in buffered-image +mode. This frammish might be useful for progressively displaying an incoming +image and then re-encoding it without loss. To do this, decode in buffered- +image mode as discussed previously, then call jpeg_read_coefficients() after +the last jpeg_finish_output() call. The arrays will be available for your use +until you call jpeg_finish_decompress(). + + +To write the contents of a JPEG file as DCT coefficients, you must provide +the DCT coefficients stored in virtual block arrays. You can either pass +block arrays read from an input JPEG file by jpeg_read_coefficients(), or +allocate virtual arrays from the JPEG compression object and fill them +yourself. In either case, jpeg_write_coefficients() is substituted for +jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is + * Create compression object + * Set all compression parameters as necessary + * Request virtual arrays if needed + * jpeg_write_coefficients() + * jpeg_finish_compress() + * Destroy or re-use compression object +jpeg_write_coefficients() is passed a pointer to an array of virtual block +array descriptors; the number of arrays is equal to cinfo.num_components. + +The virtual arrays need only have been requested, not realized, before +jpeg_write_coefficients() is called. A side-effect of +jpeg_write_coefficients() is to realize any virtual arrays that have been +requested from the compression object's memory manager. Thus, when obtaining +the virtual arrays from the compression object, you should fill the arrays +after calling jpeg_write_coefficients(). The data is actually written out +when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes +the file header. + +When writing raw DCT coefficients, it is crucial that the JPEG quantization +tables and sampling factors match the way the data was encoded, or the +resulting file will be invalid. For transcoding from an existing JPEG file, +we recommend using jpeg_copy_critical_parameters(). This routine initializes +all the compression parameters to default values (like jpeg_set_defaults()), +then copies the critical information from a source decompression object. +The decompression object should have just been used to read the entire +JPEG input file --- that is, it should be awaiting jpeg_finish_decompress(). + +jpeg_write_coefficients() marks all tables stored in the compression object +as needing to be written to the output file (thus, it acts like +jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid +emitting abbreviated JPEG files by accident. If you really want to emit an +abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables' +individual sent_table flags, between calling jpeg_write_coefficients() and +jpeg_finish_compress(). + + +Progress monitoring +------------------- + +Some applications may need to regain control from the JPEG library every so +often. The typical use of this feature is to produce a percent-done bar or +other progress display. (For a simple example, see cjpeg.c or djpeg.c.) +Although you do get control back frequently during the data-transferring pass +(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes +will occur inside jpeg_finish_compress or jpeg_start_decompress; those +routines may take a long time to execute, and you don't get control back +until they are done. + +You can define a progress-monitor routine which will be called periodically +by the library. No guarantees are made about how often this call will occur, +so we don't recommend you use it for mouse tracking or anything like that. +At present, a call will occur once per MCU row, scanline, or sample row +group, whichever unit is convenient for the current processing mode; so the +wider the image, the longer the time between calls. During the data +transferring pass, only one call occurs per call of jpeg_read_scanlines or +jpeg_write_scanlines, so don't pass a large number of scanlines at once if +you want fine resolution in the progress count. (If you really need to use +the callback mechanism for time-critical tasks like mouse tracking, you could +insert additional calls inside some of the library's inner loops.) + +To establish a progress-monitor callback, create a struct jpeg_progress_mgr, +fill in its progress_monitor field with a pointer to your callback routine, +and set cinfo->progress to point to the struct. The callback will be called +whenever cinfo->progress is non-NULL. (This pointer is set to NULL by +jpeg_create_compress or jpeg_create_decompress; the library will not change +it thereafter. So if you allocate dynamic storage for the progress struct, +make sure it will live as long as the JPEG object does. Allocating from the +JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You +can use the same callback routine for both compression and decompression. + +The jpeg_progress_mgr struct contains four fields which are set by the library: + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +During any one pass, pass_counter increases from 0 up to (not including) +pass_limit; the step size is usually but not necessarily 1. The pass_limit +value may change from one pass to another. The expected total number of +passes is in total_passes, and the number of passes already completed is in +completed_passes. Thus the fraction of work completed may be estimated as + completed_passes + (pass_counter/pass_limit) + -------------------------------------------- + total_passes +ignoring the fact that the passes may not be equal amounts of work. + +When decompressing, pass_limit can even change within a pass, because it +depends on the number of scans in the JPEG file, which isn't always known in +advance. The computed fraction-of-work-done may jump suddenly (if the library +discovers it has overestimated the number of scans) or even decrease (in the +opposite case). It is not wise to put great faith in the work estimate. + +When using the decompressor's buffered-image mode, the progress monitor work +estimate is likely to be completely unhelpful, because the library has no way +to know how many output passes will be demanded of it. Currently, the library +sets total_passes based on the assumption that there will be one more output +pass if the input file end hasn't yet been read (jpeg_input_complete() isn't +TRUE), but no more output passes if the file end has been reached when the +output pass is started. This means that total_passes will rise as additional +output passes are requested. If you have a way of determining the input file +size, estimating progress based on the fraction of the file that's been read +will probably be more useful than using the library's value. + + +Memory management +----------------- + +This section covers some key facts about the JPEG library's built-in memory +manager. For more info, please read structure.txt's section about the memory +manager, and consult the source code if necessary. + +All memory and temporary file allocation within the library is done via the +memory manager. If necessary, you can replace the "back end" of the memory +manager to control allocation yourself (for example, if you don't want the +library to use malloc() and free() for some reason). + +Some data is allocated "permanently" and will not be freed until the JPEG +object is destroyed. Most data is allocated "per image" and is freed by +jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the +memory manager yourself to allocate structures that will automatically be +freed at these times. Typical code for this is + ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size); +Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object. +Use alloc_large instead of alloc_small for anything bigger than a few Kbytes. +There are also alloc_sarray and alloc_barray routines that automatically +build 2-D sample or block arrays. + +The library's minimum space requirements to process an image depend on the +image's width, but not on its height, because the library ordinarily works +with "strip" buffers that are as wide as the image but just a few rows high. +Some operating modes (eg, two-pass color quantization) require full-image +buffers. Such buffers are treated as "virtual arrays": only the current strip +need be in memory, and the rest can be swapped out to a temporary file. + +If you use the simplest memory manager back end (jmemnobs.c), then no +temporary files are used; virtual arrays are simply malloc()'d. Images bigger +than memory can be processed only if your system supports virtual memory. +The other memory manager back ends support temporary files of various flavors +and thus work in machines without virtual memory. They may also be useful on +Unix machines if you need to process images that exceed available swap space. + +When using temporary files, the library will make the in-memory buffers for +its virtual arrays just big enough to stay within a "maximum memory" setting. +Your application can set this limit by setting cinfo->mem->max_memory_to_use +after creating the JPEG object. (Of course, there is still a minimum size for +the buffers, so the max-memory setting is effective only if it is bigger than +the minimum space needed.) If you allocate any large structures yourself, you +must allocate them before jpeg_start_compress() or jpeg_start_decompress() in +order to have them counted against the max memory limit. Also keep in mind +that space allocated with alloc_small() is ignored, on the assumption that +it's too small to be worth worrying about; so a reasonable safety margin +should be left when setting max_memory_to_use. + +If you use the jmemname.c or jmemdos.c memory manager back end, it is +important to clean up the JPEG object properly to ensure that the temporary +files get deleted. (This is especially crucial with jmemdos.c, where the +"temporary files" may be extended-memory segments; if they are not freed, +DOS will require a reboot to recover the memory.) Thus, with these memory +managers, it's a good idea to provide a signal handler that will trap any +early exit from your program. The handler should call either jpeg_abort() +or jpeg_destroy() for any active JPEG objects. A handler is not needed with +jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either, +since the C library is supposed to take care of deleting files made with +tmpfile(). + + +Memory usage +------------ + +Working memory requirements while performing compression or decompression +depend on image dimensions, image characteristics (such as colorspace and +JPEG process), and operating mode (application-selected options). + +As of v6b, the decompressor requires: + 1. About 24K in more-or-less-fixed-size data. This varies a bit depending + on operating mode and image characteristics (particularly color vs. + grayscale), but it doesn't depend on image dimensions. + 2. Strip buffers (of size proportional to the image width) for IDCT and + upsampling results. The worst case for commonly used sampling factors + is about 34 bytes * width in pixels for a color image. A grayscale image + only needs about 8 bytes per pixel column. + 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG + file (including progressive JPEGs), or whenever you select buffered-image + mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's + 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires + 6 bytes/pixel. For grayscale, figure 2 bytes/pixel. + 4. To perform 2-pass color quantization, the decompressor also needs a + 128K color lookup table and a full-image pixel buffer (3 bytes/pixel). +This does not count any memory allocated by the application, such as a +buffer to hold the final output image. + +The above figures are valid for 8-bit JPEG data precision and a machine with +32-bit ints. For 9-bit to 12-bit JPEG data, double the size of the strip +buffers and quantization pixel buffer. The "fixed-size" data will be +somewhat smaller with 16-bit ints, larger with 64-bit ints. Also, CMYK +or other unusual color spaces will require different amounts of space. + +The full-image coefficient and pixel buffers, if needed at all, do not +have to be fully RAM resident; you can have the library use temporary +files instead when the total memory usage would exceed a limit you set. +(But if your OS supports virtual memory, it's probably better to just use +jmemnobs and let the OS do the swapping.) + +The compressor's memory requirements are similar, except that it has no need +for color quantization. Also, it needs a full-image DCT coefficient buffer +if Huffman-table optimization is asked for, even if progressive mode is not +requested. + +If you need more detailed information about memory usage in a particular +situation, you can enable the MEM_STATS code in jmemmgr.c. + + +Library compile-time options +---------------------------- + +A number of compile-time options are available by modifying jmorecfg.h. + +The IJG code currently supports 8-bit to 12-bit sample data precision by +defining BITS_IN_JSAMPLE as 8, 9, 10, 11, or 12. +Note that a value larger than 8 causes JSAMPLE to be larger than a char, +so it affects the surrounding application's image data. +The sample applications cjpeg and djpeg can support deeper than 8-bit data +only for PPM and GIF file formats; you must disable the other file formats +to compile a 9-bit to 12-bit cjpeg or djpeg. (install.txt has more +information about that.) +Run-time selection and conversion of data precision are currently not +supported and may be added later. +Exception: The transcoding part (jpegtran) supports all settings in a +single instance, since it operates on the level of DCT coefficients and +not sample values. +(If you need to include an 8-bit library and a 9-bit to 12-bit library for +compression or decompression in a single application, you could probably do +it by defining NEED_SHORT_EXTERNAL_NAMES for just one of the copies. You'd +have to access the 8-bit and the 9-bit to 12-bit copies from separate +application source files. This is untested ... if you try it, we'd like to +hear whether it works!) + +Note that the standard Huffman tables are only valid for 8-bit data precision. +If you selected more than 8-bit data precision, cjpeg uses arithmetic coding +by default. The Huffman encoder normally uses entropy optimization to +compute usable tables for higher precision. Otherwise, you'll have to +supply different default Huffman tables. You may also want to supply your +own DCT quantization tables; the existing quality-scaling code has been +developed for 8-bit use, and probably doesn't generate especially good tables +for 9-bit to 12-bit. + +The maximum number of components (color channels) in the image is determined +by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we +expect that few applications will need more than four or so. + +On machines with unusual data type sizes, you may be able to improve +performance or reduce memory space by tweaking the various typedefs in +jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s +is quite slow; consider trading memory for speed by making JCOEF, INT16, and +UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int. +You probably don't want to make JSAMPLE be int unless you have lots of memory +to burn. + +You can reduce the size of the library by compiling out various optional +functions. To do this, undefine xxx_SUPPORTED symbols as necessary. + +You can also save a few K by not having text error messages in the library; +the standard error message table occupies about 5Kb. This is particularly +reasonable for embedded applications where there's no good way to display +a message anyway. To do this, remove the creation of the message table +(jpeg_std_message_table[]) from jerror.c, and alter format_message to do +something reasonable without it. You could output the numeric value of the +message code number, for example. If you do this, you can also save a couple +more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing; +you don't need trace capability anyway, right? + + +Portability considerations +-------------------------- + +The JPEG library has been written to be extremely portable; the sample +applications cjpeg and djpeg are slightly less so. This section summarizes +the design goals in this area. (If you encounter any bugs that cause the +library to be less portable than is claimed here, we'd appreciate hearing +about them.) + +The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of +the popular system include file setups, and some not-so-popular ones too. +See install.txt for configuration procedures. + +The code is not dependent on the exact sizes of the C data types. As +distributed, we make the assumptions that + char is at least 8 bits wide + short is at least 16 bits wide + int is at least 16 bits wide + long is at least 32 bits wide +(These are the minimum requirements of the ANSI C standard.) Wider types will +work fine, although memory may be used inefficiently if char is much larger +than 8 bits or short is much bigger than 16 bits. The code should work +equally well with 16- or 32-bit ints. + +In a system where these assumptions are not met, you may be able to make the +code work by modifying the typedefs in jmorecfg.h. However, you will probably +have difficulty if int is less than 16 bits wide, since references to plain +int abound in the code. + +char can be either signed or unsigned, although the code runs faster if an +unsigned char type is available. If char is wider than 8 bits, you will need +to redefine JOCTET and/or provide custom data source/destination managers so +that JOCTET represents exactly 8 bits of data on external storage. + +The JPEG library proper does not assume ASCII representation of characters. +But some of the image file I/O modules in cjpeg/djpeg do have ASCII +dependencies in file-header manipulation; so does cjpeg's select_file_type() +routine. + +The JPEG library does not rely heavily on the C library. In particular, C +stdio is used only by the data source/destination modules and the error +handler, all of which are application-replaceable. (cjpeg/djpeg are more +heavily dependent on stdio.) malloc and free are called only from the memory +manager "back end" module, so you can use a different memory allocator by +replacing that one file. + +The code generally assumes that C names must be unique in the first 15 +characters. However, global function names can be made unique in the +first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES. + +More info about porting the code may be gleaned by reading jconfig.txt, +jmorecfg.h, and jinclude.h. + + +Notes for MS-DOS implementors +----------------------------- + +The IJG code is designed to work efficiently in 80x86 "small" or "medium" +memory models (i.e., data pointers are 16 bits unless explicitly declared +"far"; code pointers can be either size). You may be able to use small +model to compile cjpeg or djpeg by itself, but you will probably have to use +medium model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model (perhaps 10%-25%), and you should avoid "huge" model +if at all possible. + +The JPEG library typically needs 2Kb-3Kb of stack space. It will also +malloc about 20K-30K of near heap space while executing (and lots of far +heap, but that doesn't count in this calculation). This figure will vary +depending on selected operating mode, and to a lesser extent on image size. +There is also about 5Kb-6Kb of constant data which will be allocated in the +near data segment (about 4Kb of this is the error message table). +Thus you have perhaps 20K available for other modules' static data and near +heap space before you need to go to a larger memory model. The C library's +static data will account for several K of this, but that still leaves a good +deal for your needs. (If you are tight on space, you could reduce the sizes +of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to +1K. Another possibility is to move the error message table to far memory; +this should be doable with only localized hacking on jerror.c.) + +About 2K of the near heap space is "permanent" memory that will not be +released until you destroy the JPEG object. This is only an issue if you +save a JPEG object between compression or decompression operations. + +Far data space may also be a tight resource when you are dealing with large +images. The most memory-intensive case is decompression with two-pass color +quantization, or single-pass quantization to an externally supplied color +map. This requires a 128Kb color lookup table plus strip buffers amounting +to about 40 bytes per column for typical sampling ratios (eg, about 25600 +bytes for a 640-pixel-wide image). You may not be able to process wide +images if you have large data structures of your own. + +Of course, all of these concerns vanish if you use a 32-bit flat-memory-model +compiler, such as DJGPP or Watcom C. We highly recommend flat model if you +can use it; the JPEG library is significantly faster in flat model. diff --git a/jpeg-9d/ltmain.sh b/jpeg-9d/ltmain.sh new file mode 100644 index 0000000..0f0a2da --- /dev/null +++ b/jpeg-9d/ltmain.sh @@ -0,0 +1,11147 @@ +#! /bin/sh +## DO NOT EDIT - This file generated from ./build-aux/ltmain.in +## by inline-source v2014-01-03.01 + +# libtool (GNU libtool) 2.4.6 +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.4.6 +package_revision=2.4.6 + + +## ------ ## +## Usage. ## +## ------ ## + +# Run './libtool --help' for help with using this script from the +# command line. + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# After configure completes, it has a better idea of some of the +# shell tools we need than the defaults used by the functions shared +# with bootstrap, so set those here where they can still be over- +# ridden by the user, but otherwise take precedence. + +: ${AUTOCONF="autoconf"} +: ${AUTOMAKE="automake"} + + +## -------------------------- ## +## Source external libraries. ## +## -------------------------- ## + +# Much of our low-level functionality needs to be sourced from external +# libraries, which are installed to $pkgauxdir. + +# Set a version string for this script. +scriptversion=2015-01-20.17; # UTC + +# General shell script boiler plate, and helper functions. +# Written by Gary V. Vaughan, 2004 + +# Copyright (C) 2004-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# As a special exception to the GNU General Public License, if you distribute +# this file as part of a program or library that is built using GNU Libtool, +# you may include this file under the same distribution terms that you use +# for the rest of that program. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# Evaluate this file near the top of your script to gain access to +# the functions and variables defined here: +# +# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh +# +# If you need to override any of the default environment variable +# settings, do that before evaluating this file. + + +## -------------------- ## +## Shell normalisation. ## +## -------------------- ## + +# Some shells need a little help to be as Bourne compatible as possible. +# Before doing anything else, make sure all that help has been provided! + +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac +fi + +# NLS nuisances: We save the old values in case they are required later. +_G_user_locale= +_G_safe_locale= +for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test set = \"\${$_G_var+set}\"; then + save_$_G_var=\$$_G_var + $_G_var=C + export $_G_var + _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" + _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" + fi" +done + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Make sure IFS has a sensible default +sp=' ' +nl=' +' +IFS="$sp $nl" + +# There are apparently some retarded systems that use ';' as a PATH separator! +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + + +## ------------------------- ## +## Locate command utilities. ## +## ------------------------- ## + + +# func_executable_p FILE +# ---------------------- +# Check that FILE is an executable regular file. +func_executable_p () +{ + test -f "$1" && test -x "$1" +} + + +# func_path_progs PROGS_LIST CHECK_FUNC [PATH] +# -------------------------------------------- +# Search for either a program that responds to --version with output +# containing "GNU", or else returned by CHECK_FUNC otherwise, by +# trying all the directories in PATH with each of the elements of +# PROGS_LIST. +# +# CHECK_FUNC should accept the path to a candidate program, and +# set $func_check_prog_result if it truncates its output less than +# $_G_path_prog_max characters. +func_path_progs () +{ + _G_progs_list=$1 + _G_check_func=$2 + _G_PATH=${3-"$PATH"} + + _G_path_prog_max=0 + _G_path_prog_found=false + _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} + for _G_dir in $_G_PATH; do + IFS=$_G_save_IFS + test -z "$_G_dir" && _G_dir=. + for _G_prog_name in $_G_progs_list; do + for _exeext in '' .EXE; do + _G_path_prog=$_G_dir/$_G_prog_name$_exeext + func_executable_p "$_G_path_prog" || continue + case `"$_G_path_prog" --version 2>&1` in + *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; + *) $_G_check_func $_G_path_prog + func_path_progs_result=$func_check_prog_result + ;; + esac + $_G_path_prog_found && break 3 + done + done + done + IFS=$_G_save_IFS + test -z "$func_path_progs_result" && { + echo "no acceptable sed could be found in \$PATH" >&2 + exit 1 + } +} + + +# We want to be able to use the functions in this file before configure +# has figured out where the best binaries are kept, which means we have +# to search for them ourselves - except when the results are already set +# where we skip the searches. + +# Unless the user overrides by setting SED, search the path for either GNU +# sed, or the sed that truncates its output the least. +test -z "$SED" && { + _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for _G_i in 1 2 3 4 5 6 7; do + _G_sed_script=$_G_sed_script$nl$_G_sed_script + done + echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed + _G_sed_script= + + func_check_prog_sed () + { + _G_path_prog=$1 + + _G_count=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo '' >> conftest.nl + "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + rm -f conftest.sed + SED=$func_path_progs_result +} + + +# Unless the user overrides by setting GREP, search the path for either GNU +# grep, or the grep that truncates its output the least. +test -z "$GREP" && { + func_check_prog_grep () + { + _G_path_prog=$1 + + _G_count=0 + _G_path_prog_max=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo 'GREP' >> conftest.nl + "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + GREP=$func_path_progs_result +} + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# All uppercase variable names are used for environment variables. These +# variables can be overridden by the user before calling a script that +# uses them if a suitable command of that name is not already available +# in the command search PATH. + +: ${CP="cp -f"} +: ${ECHO="printf %s\n"} +: ${EGREP="$GREP -E"} +: ${FGREP="$GREP -F"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} + + +## -------------------- ## +## Useful sed snippets. ## +## -------------------- ## + +sed_dirname='s|/[^/]*$||' +sed_basename='s|^.*/||' + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s|\([`"$\\]\)|\\\1|g' + +# Same as above, but do not quote variable references. +sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' + +# Sed substitution that converts a w32 file name or path +# that contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-'\' parameter expansions in output of sed_double_quote_subst that +# were '\'-ed in input to the same. If an odd number of '\' preceded a +# '$' in input to sed_double_quote_subst, that '$' was protected from +# expansion. Since each input '\' is now two '\'s, look for any number +# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. +_G_bs='\\' +_G_bs2='\\\\' +_G_bs4='\\\\\\\\' +_G_dollar='\$' +sed_double_backslash="\ + s/$_G_bs4/&\\ +/g + s/^$_G_bs2$_G_dollar/$_G_bs&/ + s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g + s/\n//g" + + +## ----------------- ## +## Global variables. ## +## ----------------- ## + +# Except for the global variables explicitly listed below, the following +# functions in the '^func_' namespace, and the '^require_' namespace +# variables initialised in the 'Resource management' section, sourcing +# this file will not pollute your global namespace with anything +# else. There's no portable way to scope variables in Bourne shell +# though, so actually running these functions will sometimes place +# results into a variable named after the function, and often use +# temporary variables in the '^_G_' namespace. If you are careful to +# avoid using those namespaces casually in your sourcing script, things +# should continue to work as you expect. And, of course, you can freely +# overwrite any of the functions or variables defined here before +# calling anything to customize them. + +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +# Allow overriding, eg assuming that you follow the convention of +# putting '$debug_cmd' at the start of all your functions, you can get +# bash to show function call trace with: +# +# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name +debug_cmd=${debug_cmd-":"} +exit_cmd=: + +# By convention, finish your script with: +# +# exit $exit_status +# +# so that you can set exit_status to non-zero if you want to indicate +# something went wrong during execution without actually bailing out at +# the point of failure. +exit_status=$EXIT_SUCCESS + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath=$0 + +# The name of this program. +progname=`$ECHO "$progpath" |$SED "$sed_basename"` + +# Make sure we have an absolute progpath for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` + progdir=`cd "$progdir" && pwd` + progpath=$progdir/$progname + ;; + *) + _G_IFS=$IFS + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS=$_G_IFS + test -x "$progdir/$progname" && break + done + IFS=$_G_IFS + test -n "$progdir" || progdir=`pwd` + progpath=$progdir/$progname + ;; +esac + + +## ----------------- ## +## Standard options. ## +## ----------------- ## + +# The following options affect the operation of the functions defined +# below, and should be set appropriately depending on run-time para- +# meters passed on the command line. + +opt_dry_run=false +opt_quiet=false +opt_verbose=false + +# Categories 'all' and 'none' are always available. Append any others +# you will pass as the first argument to func_warning from your own +# code. +warning_categories= + +# By default, display warnings according to 'opt_warning_types'. Set +# 'warning_func' to ':' to elide all warnings, or func_fatal_error to +# treat the next displayed warning as a fatal error. +warning_func=func_warn_and_continue + +# Set to 'all' to display all warnings, 'none' to suppress all +# warnings, or a space delimited list of some subset of +# 'warning_categories' to display only the listed warnings. +opt_warning_types=all + + +## -------------------- ## +## Resource management. ## +## -------------------- ## + +# This section contains definitions for functions that each ensure a +# particular resource (a file, or a non-empty configuration variable for +# example) is available, and if appropriate to extract default values +# from pertinent package files. Call them using their associated +# 'require_*' variable to ensure that they are executed, at most, once. +# +# It's entirely deliberate that calling these functions can set +# variables that don't obey the namespace limitations obeyed by the rest +# of this file, in order that that they be as useful as possible to +# callers. + + +# require_term_colors +# ------------------- +# Allow display of bold text on terminals that support it. +require_term_colors=func_require_term_colors +func_require_term_colors () +{ + $debug_cmd + + test -t 1 && { + # COLORTERM and USE_ANSI_COLORS environment variables take + # precedence, because most terminfo databases neglect to describe + # whether color sequences are supported. + test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} + + if test 1 = "$USE_ANSI_COLORS"; then + # Standard ANSI escape sequences + tc_reset='' + tc_bold=''; tc_standout='' + tc_red=''; tc_green='' + tc_blue=''; tc_cyan='' + else + # Otherwise trust the terminfo database after all. + test -n "`tput sgr0 2>/dev/null`" && { + tc_reset=`tput sgr0` + test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` + tc_standout=$tc_bold + test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` + test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` + test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` + test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` + test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` + } + fi + } + + require_term_colors=: +} + + +## ----------------- ## +## Function library. ## +## ----------------- ## + +# This section contains a variety of useful functions to call in your +# scripts. Take note of the portable wrappers for features provided by +# some modern shells, which will fall back to slower equivalents on +# less featureful shells. + + +# func_append VAR VALUE +# --------------------- +# Append VALUE onto the existing contents of VAR. + + # We should try to minimise forks, especially on Windows where they are + # unreasonably slow, so skip the feature probes when bash or zsh are + # being used: + if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then + : ${_G_HAVE_ARITH_OP="yes"} + : ${_G_HAVE_XSI_OPS="yes"} + # The += operator was introduced in bash 3.1 + case $BASH_VERSION in + [12].* | 3.0 | 3.0*) ;; + *) + : ${_G_HAVE_PLUSEQ_OP="yes"} + ;; + esac + fi + + # _G_HAVE_PLUSEQ_OP + # Can be empty, in which case the shell is probed, "yes" if += is + # useable or anything else if it does not work. + test -z "$_G_HAVE_PLUSEQ_OP" \ + && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ + && _G_HAVE_PLUSEQ_OP=yes + +if test yes = "$_G_HAVE_PLUSEQ_OP" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_append () + { + $debug_cmd + + eval "$1+=\$2" + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_append () + { + $debug_cmd + + eval "$1=\$$1\$2" + } +fi + + +# func_append_quoted VAR VALUE +# ---------------------------- +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +if test yes = "$_G_HAVE_PLUSEQ_OP"; then + eval 'func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1+=\\ \$func_quote_for_eval_result" + }' +else + func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1=\$$1\\ \$func_quote_for_eval_result" + } +fi + + +# func_append_uniq VAR VALUE +# -------------------------- +# Append unique VALUE onto the existing contents of VAR, assuming +# entries are delimited by the first character of VALUE. For example: +# +# func_append_uniq options " --another-option option-argument" +# +# will only append to $options if " --another-option option-argument " +# is not already present somewhere in $options already (note spaces at +# each end implied by leading space in second argument). +func_append_uniq () +{ + $debug_cmd + + eval _G_current_value='`$ECHO $'$1'`' + _G_delim=`expr "$2" : '\(.\)'` + + case $_G_delim$_G_current_value$_G_delim in + *"$2$_G_delim"*) ;; + *) func_append "$@" ;; + esac +} + + +# func_arith TERM... +# ------------------ +# Set func_arith_result to the result of evaluating TERMs. + test -z "$_G_HAVE_ARITH_OP" \ + && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ + && _G_HAVE_ARITH_OP=yes + +if test yes = "$_G_HAVE_ARITH_OP"; then + eval 'func_arith () + { + $debug_cmd + + func_arith_result=$(( $* )) + }' +else + func_arith () + { + $debug_cmd + + func_arith_result=`expr "$@"` + } +fi + + +# func_basename FILE +# ------------------ +# Set func_basename_result to FILE with everything up to and including +# the last / stripped. +if test yes = "$_G_HAVE_XSI_OPS"; then + # If this shell supports suffix pattern removal, then use it to avoid + # forking. Hide the definitions single quotes in case the shell chokes + # on unsupported syntax... + _b='func_basename_result=${1##*/}' + _d='case $1 in + */*) func_dirname_result=${1%/*}$2 ;; + * ) func_dirname_result=$3 ;; + esac' + +else + # ...otherwise fall back to using sed. + _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' + _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` + if test "X$func_dirname_result" = "X$1"; then + func_dirname_result=$3 + else + func_append func_dirname_result "$2" + fi' +fi + +eval 'func_basename () +{ + $debug_cmd + + '"$_b"' +}' + + +# func_dirname FILE APPEND NONDIR_REPLACEMENT +# ------------------------------------------- +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +eval 'func_dirname () +{ + $debug_cmd + + '"$_d"' +}' + + +# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT +# -------------------------------------------------------- +# Perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# For efficiency, we do not delegate to the functions above but instead +# duplicate the functionality here. +eval 'func_dirname_and_basename () +{ + $debug_cmd + + '"$_b"' + '"$_d"' +}' + + +# func_echo ARG... +# ---------------- +# Echo program name prefixed message. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_echo_all ARG... +# -------------------- +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + + +# func_echo_infix_1 INFIX ARG... +# ------------------------------ +# Echo program name, followed by INFIX on the first line, with any +# additional lines not showing INFIX. +func_echo_infix_1 () +{ + $debug_cmd + + $require_term_colors + + _G_infix=$1; shift + _G_indent=$_G_infix + _G_prefix="$progname: $_G_infix: " + _G_message=$* + + # Strip color escape sequences before counting printable length + for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" + do + test -n "$_G_tc" && { + _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` + _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` + } + done + _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes + + func_echo_infix_1_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_infix_1_IFS + $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 + _G_prefix=$_G_indent + done + IFS=$func_echo_infix_1_IFS +} + + +# func_error ARG... +# ----------------- +# Echo program name prefixed message to standard error. +func_error () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 +} + + +# func_fatal_error ARG... +# ----------------------- +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + $debug_cmd + + func_error "$*" + exit $EXIT_FAILURE +} + + +# func_grep EXPRESSION FILENAME +# ----------------------------- +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $debug_cmd + + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_len STRING +# --------------- +# Set func_len_result to the length of STRING. STRING may not +# start with a hyphen. + test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_len () + { + $debug_cmd + + func_len_result=${#1} + }' +else + func_len () + { + $debug_cmd + + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` + } +fi + + +# func_mkdir_p DIRECTORY-PATH +# --------------------------- +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + $debug_cmd + + _G_directory_path=$1 + _G_dir_list= + + if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then + + # Protect directory names starting with '-' + case $_G_directory_path in + -*) _G_directory_path=./$_G_directory_path ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$_G_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + _G_dir_list=$_G_directory_path:$_G_dir_list + + # If the last portion added has no slash in it, the list is done + case $_G_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` + done + _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` + + func_mkdir_p_IFS=$IFS; IFS=: + for _G_dir in $_G_dir_list; do + IFS=$func_mkdir_p_IFS + # mkdir can fail with a 'File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$_G_dir" 2>/dev/null || : + done + IFS=$func_mkdir_p_IFS + + # Bail out if we (or some other process) failed to create a directory. + test -d "$_G_directory_path" || \ + func_fatal_error "Failed to create '$1'" + fi +} + + +# func_mktempdir [BASENAME] +# ------------------------- +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, BASENAME is the basename for that directory. +func_mktempdir () +{ + $debug_cmd + + _G_template=${TMPDIR-/tmp}/${1-$progname} + + if test : = "$opt_dry_run"; then + # Return a directory name, but don't create it in dry-run mode + _G_tmpdir=$_G_template-$$ + else + + # If mktemp works, use that first and foremost + _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` + + if test ! -d "$_G_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + _G_tmpdir=$_G_template-${RANDOM-0}$$ + + func_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$_G_tmpdir" + umask $func_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$_G_tmpdir" || \ + func_fatal_error "cannot create temporary directory '$_G_tmpdir'" + fi + + $ECHO "$_G_tmpdir" +} + + +# func_normal_abspath PATH +# ------------------------ +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +func_normal_abspath () +{ + $debug_cmd + + # These SED scripts presuppose an absolute path with a trailing slash. + _G_pathcar='s|^/\([^/]*\).*$|\1|' + _G_pathcdr='s|^/[^/]*||' + _G_removedotparts=':dotsl + s|/\./|/|g + t dotsl + s|/\.$|/|' + _G_collapseslashes='s|/\{1,\}|/|g' + _G_finalslash='s|/*$|/|' + + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` + while :; do + # Processed it all yet? + if test / = "$func_normal_abspath_tpath"; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result"; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + + +# func_notquiet ARG... +# -------------------- +# Echo program name prefixed message only when not in quiet mode. +func_notquiet () +{ + $debug_cmd + + $opt_quiet || func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + + +# func_relative_path SRCDIR DSTDIR +# -------------------------------- +# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. +func_relative_path () +{ + $debug_cmd + + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=$func_dirname_result + if test -z "$func_relative_path_tlibdir"; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test -n "$func_stripname_result"; then + func_append func_relative_path_result "/$func_stripname_result" + fi + + # Normalisation. If bindir is libdir, return '.' else relative path. + if test -n "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + fi + + test -n "$func_relative_path_result" || func_relative_path_result=. + + : +} + + +# func_quote_for_eval ARG... +# -------------------------- +# Aesthetically quote ARGs to be evaled later. +# This function returns two values: +# i) func_quote_for_eval_result +# double-quoted, suitable for a subsequent eval +# ii) func_quote_for_eval_unquoted_result +# has all characters that are still active within double +# quotes backslashified. +func_quote_for_eval () +{ + $debug_cmd + + func_quote_for_eval_unquoted_result= + func_quote_for_eval_result= + while test 0 -lt $#; do + case $1 in + *[\\\`\"\$]*) + _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; + *) + _G_unquoted_arg=$1 ;; + esac + if test -n "$func_quote_for_eval_unquoted_result"; then + func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" + else + func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" + fi + + case $_G_unquoted_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_quoted_arg=\"$_G_unquoted_arg\" + ;; + *) + _G_quoted_arg=$_G_unquoted_arg + ;; + esac + + if test -n "$func_quote_for_eval_result"; then + func_append func_quote_for_eval_result " $_G_quoted_arg" + else + func_append func_quote_for_eval_result "$_G_quoted_arg" + fi + shift + done +} + + +# func_quote_for_expand ARG +# ------------------------- +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + $debug_cmd + + case $1 in + *[\\\`\"]*) + _G_arg=`$ECHO "$1" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; + *) + _G_arg=$1 ;; + esac + + case $_G_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_arg=\"$_G_arg\" + ;; + esac + + func_quote_for_expand_result=$_G_arg +} + + +# func_stripname PREFIX SUFFIX NAME +# --------------------------------- +# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_stripname () + { + $debug_cmd + + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary variable first. + func_stripname_result=$3 + func_stripname_result=${func_stripname_result#"$1"} + func_stripname_result=${func_stripname_result%"$2"} + }' +else + func_stripname () + { + $debug_cmd + + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; + esac + } +fi + + +# func_show_eval CMD [FAIL_EXP] +# ----------------------------- +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + func_quote_for_expand "$_G_cmd" + eval "func_notquiet $func_quote_for_expand_result" + + $opt_dry_run || { + eval "$_G_cmd" + _G_status=$? + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_show_eval_locale CMD [FAIL_EXP] +# ------------------------------------ +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + $opt_quiet || { + func_quote_for_expand "$_G_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + $opt_dry_run || { + eval "$_G_user_locale + $_G_cmd" + _G_status=$? + eval "$_G_safe_locale" + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_tr_sh +# ---------- +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + $debug_cmd + + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_verbose ARG... +# ------------------- +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $debug_cmd + + $opt_verbose && func_echo "$*" + + : +} + + +# func_warn_and_continue ARG... +# ----------------------------- +# Echo program name prefixed warning message to standard error. +func_warn_and_continue () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 +} + + +# func_warning CATEGORY ARG... +# ---------------------------- +# Echo program name prefixed warning message to standard error. Warning +# messages can be filtered according to CATEGORY, where this function +# elides messages where CATEGORY is not listed in the global variable +# 'opt_warning_types'. +func_warning () +{ + $debug_cmd + + # CATEGORY must be in the warning_categories list! + case " $warning_categories " in + *" $1 "*) ;; + *) func_internal_error "invalid warning category '$1'" ;; + esac + + _G_category=$1 + shift + + case " $opt_warning_types " in + *" $_G_category "*) $warning_func ${1+"$@"} ;; + esac +} + + +# func_sort_ver VER1 VER2 +# ----------------------- +# 'sort -V' is not generally available. +# Note this deviates from the version comparison in automake +# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a +# but this should suffice as we won't be specifying old +# version formats or redundant trailing .0 in bootstrap.conf. +# If we did want full compatibility then we should probably +# use m4_version_compare from autoconf. +func_sort_ver () +{ + $debug_cmd + + printf '%s\n%s\n' "$1" "$2" \ + | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n +} + +# func_lt_ver PREV CURR +# --------------------- +# Return true if PREV and CURR are in the correct order according to +# func_sort_ver, otherwise false. Use it like this: +# +# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." +func_lt_ver () +{ + $debug_cmd + + test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: +#! /bin/sh + +# Set a version string for this script. +scriptversion=2014-01-07.03; # UTC + +# A portable, pluggable option parser for Bourne shell. +# Written by Gary V. Vaughan, 2010 + +# Copyright (C) 2010-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# This file is a library for parsing options in your shell scripts along +# with assorted other useful supporting features that you can make use +# of too. +# +# For the simplest scripts you might need only: +# +# #!/bin/sh +# . relative/path/to/funclib.sh +# . relative/path/to/options-parser +# scriptversion=1.0 +# func_options ${1+"$@"} +# eval set dummy "$func_options_result"; shift +# ...rest of your script... +# +# In order for the '--version' option to work, you will need to have a +# suitably formatted comment like the one at the top of this file +# starting with '# Written by ' and ending with '# warranty; '. +# +# For '-h' and '--help' to work, you will also need a one line +# description of your script's purpose in a comment directly above the +# '# Written by ' line, like the one at the top of this file. +# +# The default options also support '--debug', which will turn on shell +# execution tracing (see the comment above debug_cmd below for another +# use), and '--verbose' and the func_verbose function to allow your script +# to display verbose messages only when your user has specified +# '--verbose'. +# +# After sourcing this file, you can plug processing for additional +# options by amending the variables from the 'Configuration' section +# below, and following the instructions in the 'Option parsing' +# section further down. + +## -------------- ## +## Configuration. ## +## -------------- ## + +# You should override these variables in your script after sourcing this +# file so that they reflect the customisations you have added to the +# option parser. + +# The usage line for option parsing errors and the start of '-h' and +# '--help' output messages. You can embed shell variables for delayed +# expansion at the time the message is displayed, but you will need to +# quote other shell meta-characters carefully to prevent them being +# expanded when the contents are evaled. +usage='$progpath [OPTION]...' + +# Short help message in response to '-h' and '--help'. Add to this or +# override it after sourcing this library to reflect the full set of +# options your script accepts. +usage_message="\ + --debug enable verbose shell tracing + -W, --warnings=CATEGORY + report the warnings falling in CATEGORY [all] + -v, --verbose verbosely report processing + --version print version information and exit + -h, --help print short or long help message and exit +" + +# Additional text appended to 'usage_message' in response to '--help'. +long_help_message=" +Warning categories include: + 'all' show all warnings + 'none' turn off all the warnings + 'error' warnings are treated as fatal errors" + +# Help message printed before fatal option parsing errors. +fatal_help="Try '\$progname --help' for more information." + + + +## ------------------------- ## +## Hook function management. ## +## ------------------------- ## + +# This section contains functions for adding, removing, and running hooks +# to the main code. A hook is just a named list of of function, that can +# be run in order later on. + +# func_hookable FUNC_NAME +# ----------------------- +# Declare that FUNC_NAME will run hooks added with +# 'func_add_hook FUNC_NAME ...'. +func_hookable () +{ + $debug_cmd + + func_append hookable_fns " $1" +} + + +# func_add_hook FUNC_NAME HOOK_FUNC +# --------------------------------- +# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must +# first have been declared "hookable" by a call to 'func_hookable'. +func_add_hook () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not accept hook functions." ;; + esac + + eval func_append ${1}_hooks '" $2"' +} + + +# func_remove_hook FUNC_NAME HOOK_FUNC +# ------------------------------------ +# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +func_remove_hook () +{ + $debug_cmd + + eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' +} + + +# func_run_hooks FUNC_NAME [ARG]... +# --------------------------------- +# Run all hook functions registered to FUNC_NAME. +# It is assumed that the list of hook functions contains nothing more +# than a whitespace-delimited list of legal shell function names, and +# no effort is wasted trying to catch shell meta-characters or preserve +# whitespace. +func_run_hooks () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not support hook funcions.n" ;; + esac + + eval _G_hook_fns=\$$1_hooks; shift + + for _G_hook in $_G_hook_fns; do + eval $_G_hook '"$@"' + + # store returned options list back into positional + # parameters for next 'cmd' execution. + eval _G_hook_result=\$${_G_hook}_result + eval set dummy "$_G_hook_result"; shift + done + + func_quote_for_eval ${1+"$@"} + func_run_hooks_result=$func_quote_for_eval_result +} + + + +## --------------- ## +## Option parsing. ## +## --------------- ## + +# In order to add your own option parsing hooks, you must accept the +# full positional parameter list in your hook function, remove any +# options that you action, and then pass back the remaining unprocessed +# options in '_result', escaped suitably for +# 'eval'. Like this: +# +# my_options_prep () +# { +# $debug_cmd +# +# # Extend the existing usage message. +# usage_message=$usage_message' +# -s, --silent don'\''t print informational messages +# ' +# +# func_quote_for_eval ${1+"$@"} +# my_options_prep_result=$func_quote_for_eval_result +# } +# func_add_hook func_options_prep my_options_prep +# +# +# my_silent_option () +# { +# $debug_cmd +# +# # Note that for efficiency, we parse as many options as we can +# # recognise in a loop before passing the remainder back to the +# # caller on the first unrecognised argument we encounter. +# while test $# -gt 0; do +# opt=$1; shift +# case $opt in +# --silent|-s) opt_silent=: ;; +# # Separate non-argument short options: +# -s*) func_split_short_opt "$_G_opt" +# set dummy "$func_split_short_opt_name" \ +# "-$func_split_short_opt_arg" ${1+"$@"} +# shift +# ;; +# *) set dummy "$_G_opt" "$*"; shift; break ;; +# esac +# done +# +# func_quote_for_eval ${1+"$@"} +# my_silent_option_result=$func_quote_for_eval_result +# } +# func_add_hook func_parse_options my_silent_option +# +# +# my_option_validation () +# { +# $debug_cmd +# +# $opt_silent && $opt_verbose && func_fatal_help "\ +# '--silent' and '--verbose' options are mutually exclusive." +# +# func_quote_for_eval ${1+"$@"} +# my_option_validation_result=$func_quote_for_eval_result +# } +# func_add_hook func_validate_options my_option_validation +# +# You'll alse need to manually amend $usage_message to reflect the extra +# options you parse. It's preferable to append if you can, so that +# multiple option parsing hooks can be added safely. + + +# func_options [ARG]... +# --------------------- +# All the functions called inside func_options are hookable. See the +# individual implementations for details. +func_hookable func_options +func_options () +{ + $debug_cmd + + func_options_prep ${1+"$@"} + eval func_parse_options \ + ${func_options_prep_result+"$func_options_prep_result"} + eval func_validate_options \ + ${func_parse_options_result+"$func_parse_options_result"} + + eval func_run_hooks func_options \ + ${func_validate_options_result+"$func_validate_options_result"} + + # save modified positional parameters for caller + func_options_result=$func_run_hooks_result +} + + +# func_options_prep [ARG]... +# -------------------------- +# All initialisations required before starting the option parse loop. +# Note that when calling hook functions, we pass through the list of +# positional parameters. If a hook function modifies that list, and +# needs to propogate that back to rest of this script, then the complete +# modified list must be put in 'func_run_hooks_result' before +# returning. +func_hookable func_options_prep +func_options_prep () +{ + $debug_cmd + + # Option defaults: + opt_verbose=false + opt_warning_types= + + func_run_hooks func_options_prep ${1+"$@"} + + # save modified positional parameters for caller + func_options_prep_result=$func_run_hooks_result +} + + +# func_parse_options [ARG]... +# --------------------------- +# The main option parsing loop. +func_hookable func_parse_options +func_parse_options () +{ + $debug_cmd + + func_parse_options_result= + + # this just eases exit handling + while test $# -gt 0; do + # Defer to hook functions for initial option parsing, so they + # get priority in the event of reusing an option name. + func_run_hooks func_parse_options ${1+"$@"} + + # Adjust func_parse_options positional parameters to match + eval set dummy "$func_run_hooks_result"; shift + + # Break out of the loop if we already parsed every option. + test $# -gt 0 || break + + _G_opt=$1 + shift + case $_G_opt in + --debug|-x) debug_cmd='set -x' + func_echo "enabling shell trace mode" + $debug_cmd + ;; + + --no-warnings|--no-warning|--no-warn) + set dummy --warnings none ${1+"$@"} + shift + ;; + + --warnings|--warning|-W) + test $# = 0 && func_missing_arg $_G_opt && break + case " $warning_categories $1" in + *" $1 "*) + # trailing space prevents matching last $1 above + func_append_uniq opt_warning_types " $1" + ;; + *all) + opt_warning_types=$warning_categories + ;; + *none) + opt_warning_types=none + warning_func=: + ;; + *error) + opt_warning_types=$warning_categories + warning_func=func_fatal_error + ;; + *) + func_fatal_error \ + "unsupported warning category: '$1'" + ;; + esac + shift + ;; + + --verbose|-v) opt_verbose=: ;; + --version) func_version ;; + -\?|-h) func_usage ;; + --help) func_help ;; + + # Separate optargs to long options (plugins may need this): + --*=*) func_split_equals "$_G_opt" + set dummy "$func_split_equals_lhs" \ + "$func_split_equals_rhs" ${1+"$@"} + shift + ;; + + # Separate optargs to short options: + -W*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-v*|-x*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + func_parse_options_result=$func_quote_for_eval_result +} + + +# func_validate_options [ARG]... +# ------------------------------ +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +func_hookable func_validate_options +func_validate_options () +{ + $debug_cmd + + # Display all warnings if -W was not given. + test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" + + func_run_hooks func_validate_options ${1+"$@"} + + # Bail if the options were screwed! + $exit_cmd $EXIT_FAILURE + + # save modified positional parameters for caller + func_validate_options_result=$func_run_hooks_result +} + + + +## ----------------- ## +## Helper functions. ## +## ----------------- ## + +# This section contains the helper functions used by the rest of the +# hookable option parser framework in ascii-betical order. + + +# func_fatal_help ARG... +# ---------------------- +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + $debug_cmd + + eval \$ECHO \""Usage: $usage"\" + eval \$ECHO \""$fatal_help"\" + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + + +# func_help +# --------- +# Echo long help message to standard output and exit. +func_help () +{ + $debug_cmd + + func_usage_message + $ECHO "$long_help_message" + exit 0 +} + + +# func_missing_arg ARGNAME +# ------------------------ +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $debug_cmd + + func_error "Missing argument for '$1'." + exit_cmd=exit +} + + +# func_split_equals STRING +# ------------------------ +# Set func_split_equals_lhs and func_split_equals_rhs shell variables after +# splitting STRING at the '=' sign. +test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=${1%%=*} + func_split_equals_rhs=${1#*=} + test "x$func_split_equals_lhs" = "x$1" \ + && func_split_equals_rhs= + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` + func_split_equals_rhs= + test "x$func_split_equals_lhs" = "x$1" \ + || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` + } +fi #func_split_equals + + +# func_split_short_opt SHORTOPT +# ----------------------------- +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"} + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` + func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` + } +fi #func_split_short_opt + + +# func_usage +# ---------- +# Echo short help message to standard output and exit. +func_usage () +{ + $debug_cmd + + func_usage_message + $ECHO "Run '$progname --help |${PAGER-more}' for full usage" + exit 0 +} + + +# func_usage_message +# ------------------ +# Echo short help message to standard output. +func_usage_message () +{ + $debug_cmd + + eval \$ECHO \""Usage: $usage"\" + echo + $SED -n 's|^# || + /^Written by/{ + x;p;x + } + h + /^Written by/q' < "$progpath" + echo + eval \$ECHO \""$usage_message"\" +} + + +# func_version +# ------------ +# Echo version message to standard output and exit. +func_version () +{ + $debug_cmd + + printf '%s\n' "$progname $scriptversion" + $SED -n ' + /(C)/!b go + :more + /\./!{ + N + s|\n# | | + b more + } + :go + /^# Written by /,/# warranty; / { + s|^# || + s|^# *$|| + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + p + } + /^# Written by / { + s|^# || + p + } + /^warranty; /q' < "$progpath" + + exit $? +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: + +# Set a version string. +scriptversion='(GNU libtool) 2.4.6' + + +# func_echo ARG... +# ---------------- +# Libtool also displays the current mode in messages, so override +# funclib.sh func_echo with this custom definition. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () +{ + $debug_cmd + + $warning_func ${1+"$@"} +} + + +## ---------------- ## +## Options parsing. ## +## ---------------- ## + +# Hook in the functions to make sure our own options are parsed during +# the option parsing loop. + +usage='$progpath [OPTION]... [MODE-ARG]...' + +# Short help message in response to '-h'. +usage_message="Options: + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --mode=MODE use operation mode MODE + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message +" + +# Additional text appended to 'usage_message' in response to '--help'. +func_help () +{ + $debug_cmd + + func_usage_message + $ECHO "$long_help_message + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. When passed as first option, +'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. +Try '$progname --help --mode=MODE' for a more detailed description of MODE. + +When reporting a bug, please describe a test case to reproduce it and +include the following information: + + host-triplet: $host + shell: $SHELL + compiler: $LTCC + compiler flags: $LTCFLAGS + linker: $LD (gnu? $with_gnu_ld) + version: $progname (GNU libtool) 2.4.6 + automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` + autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` + +Report bugs to . +GNU libtool home page: . +General help using GNU software: ." + exit 0 +} + + +# func_lo2o OBJECT-NAME +# --------------------- +# Transform OBJECT-NAME from a '.lo' suffix to the platform specific +# object suffix. + +lo2o=s/\\.lo\$/.$objext/ +o2lo=s/\\.$objext\$/.lo/ + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_lo2o () + { + case $1 in + *.lo) func_lo2o_result=${1%.lo}.$objext ;; + * ) func_lo2o_result=$1 ;; + esac + }' + + # func_xform LIBOBJ-OR-SOURCE + # --------------------------- + # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) + # suffix to a '.lo' libtool-object suffix. + eval 'func_xform () + { + func_xform_result=${1%.*}.lo + }' +else + # ...otherwise fall back to using sed. + func_lo2o () + { + func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` + } + + func_xform () + { + func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` + } +fi + + +# func_fatal_configuration ARG... +# ------------------------------- +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func__fatal_error ${1+"$@"} \ + "See the $PACKAGE documentation for more information." \ + "Fatal configuration error." +} + + +# func_config +# ----------- +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + + +# func_features +# ------------- +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test yes = "$build_libtool_libs"; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test yes = "$build_old_libs"; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + + +# func_enable_tag TAGNAME +# ----------------------- +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname=$1 + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf=/$re_begincf/,/$re_endcf/p + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + + +# func_check_version_match +# ------------------------ +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# libtool_options_prep [ARG]... +# ----------------------------- +# Preparation for options parsed by libtool. +libtool_options_prep () +{ + $debug_mode + + # Option defaults: + opt_config=false + opt_dlopen= + opt_dry_run=false + opt_help=false + opt_mode= + opt_preserve_dup_deps=false + opt_quiet=false + + nonopt= + preserve_args= + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Pass back the list of options. + func_quote_for_eval ${1+"$@"} + libtool_options_prep_result=$func_quote_for_eval_result +} +func_add_hook func_options_prep libtool_options_prep + + +# libtool_parse_options [ARG]... +# --------------------------------- +# Provide handling for libtool specific options. +libtool_parse_options () +{ + $debug_cmd + + # Perform our own loop to consume as many options as possible in + # each iteration. + while test $# -gt 0; do + _G_opt=$1 + shift + case $_G_opt in + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + + --config) func_config ;; + + --dlopen|-dlopen) + opt_dlopen="${opt_dlopen+$opt_dlopen +}$1" + shift + ;; + + --preserve-dup-deps) + opt_preserve_dup_deps=: ;; + + --features) func_features ;; + + --finish) set dummy --mode finish ${1+"$@"}; shift ;; + + --help) opt_help=: ;; + + --help-all) opt_help=': help-all' ;; + + --mode) test $# = 0 && func_missing_arg $_G_opt && break + opt_mode=$1 + case $1 in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $_G_opt" + exit_cmd=exit + break + ;; + esac + shift + ;; + + --no-silent|--no-quiet) + opt_quiet=false + func_append preserve_args " $_G_opt" + ;; + + --no-warnings|--no-warning|--no-warn) + opt_warning=false + func_append preserve_args " $_G_opt" + ;; + + --no-verbose) + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --silent|--quiet) + opt_quiet=: + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --tag) test $# = 0 && func_missing_arg $_G_opt && break + opt_tag=$1 + func_append preserve_args " $_G_opt $1" + func_enable_tag "$1" + shift + ;; + + --verbose|-v) opt_quiet=false + opt_verbose=: + func_append preserve_args " $_G_opt" + ;; + + # An option not handled by this hook function: + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + libtool_parse_options_result=$func_quote_for_eval_result +} +func_add_hook func_parse_options libtool_parse_options + + + +# libtool_validate_options [ARG]... +# --------------------------------- +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +libtool_validate_options () +{ + # save first non-option argument + if test 0 -lt $#; then + nonopt=$1 + shift + fi + + # preserve --debug + test : = "$debug_cmd" || func_append preserve_args " --debug" + + case $host in + # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 + # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + test yes != "$build_libtool_libs" \ + && test yes != "$build_old_libs" \ + && func_fatal_configuration "not configured to build any kind of library" + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test execute != "$opt_mode"; then + func_error "unrecognized option '-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help=$help + help="Try '$progname --help --mode=$opt_mode' for more information." + } + + # Pass back the unparsed argument list + func_quote_for_eval ${1+"$@"} + libtool_validate_options_result=$func_quote_for_eval_result +} +func_add_hook func_validate_options libtool_validate_options + + +# Process options as early as possible so that --help and --version +# can return quickly. +func_options ${1+"$@"} +eval set dummy "$func_options_result"; shift + + + +## ----------- ## +## Main. ## +## ----------- ## + +magic='%%%MAGIC variable%%%' +magic_exe='%%%MAGIC EXE variable%%%' + +# Global variables. +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# func_generated_by_libtool +# True iff stdin has been generated by Libtool. This function is only +# a basic sanity check; it will hardly flush out determined imposters. +func_generated_by_libtool_p () +{ + $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_p file +# True iff FILE is a libtool '.la' library or '.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool '.la' library or '.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if 'file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case $lalib_p_line in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test yes = "$lalib_p" +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + test -f "$1" && + $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $debug_cmd + + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$sp$nl + eval cmd=\"$cmd\" + IFS=$save_ifs + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# 'FILE.' does not work on cygwin managed mounts. +func_source () +{ + $debug_cmd + + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case $lt_sysroot:$1 in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result='='$func_stripname_result + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $debug_cmd + + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with '--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=$1 + if test yes = "$build_libtool_libs"; then + write_lobj=\'$2\' + else + write_lobj=none + fi + + if test yes = "$build_old_libs"; then + write_oldobj=\'$3\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $debug_cmd + + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result= + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result"; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $debug_cmd + + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $debug_cmd + + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $debug_cmd + + if test -z "$2" && test -n "$1"; then + func_error "Could not determine host file name corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result=$1 + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $debug_cmd + + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " '$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result=$3 + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $debug_cmd + + case $4 in + $1 ) func_to_host_path_result=$3$func_to_host_path_result + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via '$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $debug_cmd + + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $debug_cmd + + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result=$1 +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result=$func_convert_core_msys_to_w32_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result=$func_convert_core_file_wine_to_w32_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result=$func_cygpath_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result=$func_cygpath_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via '$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $debug_cmd + + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd=func_convert_path_$func_stripname_result + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $debug_cmd + + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result=$1 +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result=$func_convert_core_msys_to_w32_result + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result=$func_convert_core_path_wine_to_w32_result + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result=$func_cygpath_result + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result=$func_cygpath_result + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_dll_def_p FILE +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with _LT_DLL_DEF_P in libtool.m4 +func_dll_def_p () +{ + $debug_cmd + + func_dll_def_p_tmp=`$SED -n \ + -e 's/^[ ]*//' \ + -e '/^\(;.*\)*$/d' \ + -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ + -e q \ + "$1"` + test DEF = "$func_dll_def_p_tmp" +} + + +# func_mode_compile arg... +func_mode_compile () +{ + $debug_cmd + + # Get the compilation command and the source file. + base_compile= + srcfile=$nonopt # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg=$arg + arg_mode=normal + ;; + + target ) + libobj=$arg + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify '-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs=$IFS; IFS=, + for arg in $args; do + IFS=$save_ifs + func_append_quoted lastarg "$arg" + done + IFS=$save_ifs + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg=$srcfile + srcfile=$arg + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with '-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj=$func_basename_result + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from '$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test yes = "$build_libtool_libs" \ + || func_fatal_configuration "cannot build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name '$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname=$func_basename_result + xdir=$func_dirname_result + lobj=$xdir$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test yes = "$build_old_libs"; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test no = "$compiler_c_o"; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext + lockfile=$output_obj.lock + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test yes = "$need_locks"; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test warn = "$need_locks"; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support '-c' and '-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test yes = "$build_libtool_libs"; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test no != "$pic_mode"; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test warn = "$need_locks" && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support '-c' and '-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test yes = "$suppress_opt"; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test yes = "$build_old_libs"; then + if test yes != "$pic_mode"; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test yes = "$compiler_c_o"; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test warn = "$need_locks" && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support '-c' and '-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test no != "$need_locks"; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test compile = "$opt_mode" && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a '.o' file suitable for static linking + -static only build a '.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a 'standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix '.c' with the +library object suffix, '.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to '-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the '--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the 'install' or 'cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE use a list of object files found in FILE to specify objects + -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with '-') are ignored. + +Every other argument is treated as a filename. Files ending in '.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in '.la', then a libtool library is created, +only library objects ('.lo' files) may be specified, and '-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created +using 'ar' and 'ranlib', or on Windows using 'lib'. + +If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode '$opt_mode'" + ;; + esac + + echo + $ECHO "Try '$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test : = "$opt_help"; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | $SED -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + $SED '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $debug_cmd + + # The first argument is the command name. + cmd=$nonopt + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "'$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "'$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "'$file' was not linked with '-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir=$func_dirname_result + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir=$func_dirname_result + ;; + + *) + func_warning "'-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir=$absdir + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic=$magic + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file=$progdir/$program + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file=$progdir/$program + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if $opt_dry_run; then + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + else + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd=\$cmd$args + fi +} + +test execute = "$opt_mode" && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $debug_cmd + + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "'$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument '$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and '=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_quiet && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the '-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the '$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the '$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the '$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test finish = "$opt_mode" && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $debug_cmd + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac + then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=false + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=: ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test X-m = "X$prev" && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the '$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=: + if $isdir; then + destdir=$dest + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir=$func_dirname_result + destname=$func_basename_result + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "'$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "'$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic=$magic + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "'$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir=$func_dirname_result + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking '$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname=$1 + shift + + srcname=$realname + test -n "$relink_command" && srcname=${realname}T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme=$stripme + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme= + ;; + esac + ;; + os2*) + case $realname in + *_dll.a) + tstripme= + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try 'ln -sf' first, because the 'ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib=$destdir/$realname + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name=$func_basename_result + instname=$dir/${name}i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile=$destdir/$destname + else + func_basename "$file" + destfile=$func_basename_result + destfile=$destdir/$destfile + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest=$destfile + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to '$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test yes = "$build_old_libs"; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile=$destdir/$destname + else + func_basename "$file" + destfile=$func_basename_result + destfile=$destdir/$destfile + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext= + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=.exe + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script '$wrapper'" + + finalize=: + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "'$lib' has not been installed in '$libdir'" + finalize=false + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test no = "$fast_install" && test -n "$relink_command"; then + $opt_dry_run || { + if $finalize; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file=$func_basename_result + outputname=$tmpdir/$file + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_quiet || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink '$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file=$outputname + else + func_warning "cannot relink '$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name=$func_basename_result + + # Set up the ranlib parameters. + oldlib=$destdir/$name + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run '$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test install = "$opt_mode" && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $debug_cmd + + my_outputname=$1 + my_originator=$2 + my_pic_p=${3-false} + my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms=${my_outputname}S.c + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist=$output_objdir/$my_outputname.nm + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + +/* External symbol declarations for the compiler. */\ +" + + if test yes = "$dlself"; then + func_verbose "generating symbol list for '$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from '$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols=$output_objdir/$outputname.exp + $opt_dry_run || { + $RM $export_symbols + eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from '$dlprefile'" + func_basename "$dlprefile" + name=$func_basename_result + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename= + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname"; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename=$func_basename_result + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename"; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + func_show_eval '$RM "${nlist}I"' + if test -n "$global_symbol_to_import"; then + eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[];\ +" + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ +static void lt_syminit(void) +{ + LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; + for (; symbol->name; ++symbol) + {" + $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" + echo >> "$output_objdir/$my_dlsyms" "\ + } +}" + fi + echo >> "$output_objdir/$my_dlsyms" "\ +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{ {\"$my_originator\", (void *) 0}," + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ + {\"@INIT@\", (void *) <_syminit}," + fi + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + $my_pic_p && pic_flag_for_symtable=" $pic_flag" + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' + + # Transform the symbol file into the correct name. + symfileobj=$output_objdir/${my_outputname}S.$objext + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for '$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $debug_cmd + + win32_libid_type=unknown + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + case $nm_interface in + "MS dumpbin") + if func_cygming_ms_implib_p "$1" || + func_cygming_gnu_implib_p "$1" + then + win32_nmres=import + else + win32_nmres= + fi + ;; + *) + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s|.*|import| + p + q + } + }'` + ;; + esac + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $debug_cmd + + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $debug_cmd + + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive that possess that section. Heuristic: eliminate + # all those that have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $debug_cmd + + if func_cygming_gnu_implib_p "$1"; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1"; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result= + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $debug_cmd + + f_ex_an_ar_dir=$1; shift + f_ex_an_ar_oldlib=$1 + if test yes = "$lock_old_archive_extraction"; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test yes = "$lock_old_archive_extraction"; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $debug_cmd + + my_gentop=$1; shift + my_oldlibs=${1+"$@"} + my_oldobjs= + my_xlib= + my_xabs= + my_xdir= + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib=$func_basename_result + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir=$my_gentop/$my_xlib_u + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + func_basename "$darwin_archive" + darwin_base_archive=$func_basename_result + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches; do + func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" + $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" + cd "unfat-$$/$darwin_base_archive-$darwin_arch" + func_extract_an_archive "`pwd`" "$darwin_base_archive" + cd "$darwin_curdir" + $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result=$my_oldobjs +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory where it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ that is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options that match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test yes = "$fast_install"; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + \$ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + +/* declarations of non-ANSI functions */ +#if defined __MINGW32__ +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined __CYGWIN__ +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined other_platform || defined ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined _MSC_VER +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +#elif defined __MINGW32__ +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined __CYGWIN__ +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined other platforms ... */ +#endif + +#if defined PATH_MAX +# define LT_PATHMAX PATH_MAX +#elif defined MAXPATHLEN +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ + defined __OS2__ +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free (stale); stale = 0; } \ +} while (0) + +#if defined LT_DEBUGWRAPPER +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + size_t tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined HAVE_DOS_BASED_FILE_SYSTEM + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined HAVE_DOS_BASED_FILE_SYSTEM + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = (size_t) (q - p); + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (STREQ (str, pat)) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + size_t len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + size_t orig_value_len = strlen (orig_value); + size_t add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + size_t len = strlen (new_value); + while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[--len] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $debug_cmd + + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_suncc_cstd_abi +# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! +# Several compiler flags select an ABI that is incompatible with the +# Cstd library. Avoid specifying it if any are in CXXFLAGS. +func_suncc_cstd_abi () +{ + $debug_cmd + + case " $compile_command " in + *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) + suncc_use_cstd_abi=no + ;; + *) + suncc_use_cstd_abi=yes + ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $debug_cmd + + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # what system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll that has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + os2dllname= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=false + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module=$wl-single_module + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test yes != "$build_libtool_libs" \ + && func_fatal_configuration "cannot build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg=$1 + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir=$arg + prev= + continue + ;; + dlfiles|dlprefiles) + $preload || { + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=: + } + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test no = "$dlself"; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test dlprefiles = "$prev"; then + dlself=yes + elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test dlfiles = "$prev"; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols=$arg + test -f "$arg" \ + || func_fatal_error "symbol file '$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex=$arg + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir=$arg + prev= + continue + ;; + mllvm) + # Clang does not use LLVM to link, so we can simply discard any + # '-mllvm $arg' options when doing the link step. + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + if test none != "$pic_object"; then + # Prepend the subdirectory the object is found in. + pic_object=$xdir$pic_object + + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test dlprefiles = "$prev"; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg=$pic_object + fi + + # Non-PIC object. + if test none != "$non_pic_object"; then + # Prepend the subdirectory the object is found in. + non_pic_object=$xdir$non_pic_object + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object=$pic_object + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "'$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file '$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + os2dllname) + os2dllname=$arg + prev= + continue + ;; + precious_regex) + precious_files_regex=$arg + prev= + continue + ;; + release) + release=-$arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test rpath = "$prev"; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds=$arg + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg=$arg + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "'-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test X-export-symbols = "X$arg"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between '-L' and '$1'" + else + func_fatal_error "need path for '-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of '$dir'" + dir=$absdir + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test X-lc = "X$arg" || test X-lm = "X$arg"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test X-lc = "X$arg" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) + # Do not include libc due to us having libc/libc_r. + test X-lc = "X$arg" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test X-lc = "X$arg" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test X-lc = "X$arg" && continue + ;; + esac + elif test X-lc_r = "X$arg"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -mllvm) + prev=mllvm + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module=$wl-multi_module + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "'-no-install' is ignored for $host" + func_warning "assuming '-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -os2dllname) + prev=os2dllname + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs=$IFS; IFS=, + for flag in $args; do + IFS=$save_ifs + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS=$save_ifs + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs=$IFS; IFS=, + for flag in $args; do + IFS=$save_ifs + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS=$save_ifs + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # -fstack-protector* stack protector flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -stdlib=* select c++ std lib with clang + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + -Z*) + if test os2 = "`expr $host : '.*\(os2\)'`"; then + # OS/2 uses -Zxxx to specify OS/2-specific options + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case $arg in + -Zlinker | -Zstack) + prev=xcompiler + ;; + esac + continue + else + # Otherwise treat like 'Some other compiler flag' below + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + fi + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + test none = "$pic_object" || { + # Prepend the subdirectory the object is found in. + pic_object=$xdir$pic_object + + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test dlprefiles = "$prev"; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg=$pic_object + } + + # Non-PIC object. + if test none != "$non_pic_object"; then + # Prepend the subdirectory the object is found in. + non_pic_object=$xdir$non_pic_object + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object=$pic_object + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "'$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test dlfiles = "$prev"; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test dlprefiles = "$prev"; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the '$prevarg' option requires an argument" + + if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname=$func_basename_result + libobjs_save=$libobjs + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + # Definition is injected by LT_CONFIG during libtool generation. + func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" + + func_dirname "$output" "/" "" + output_objdir=$func_dirname_result$objdir + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test lib = "$linkmode"; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=false + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test lib,link = "$linkmode,$pass"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs=$tmp_deplibs + fi + + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass"; then + libs=$deplibs + deplibs= + fi + if test prog = "$linkmode"; then + case $pass in + dlopen) libs=$dlfiles ;; + dlpreopen) libs=$dlprefiles ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test lib,dlpreopen = "$linkmode,$pass"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs=$dlprefiles + fi + if test dlopen = "$pass"; then + # Collect dlpreopened libraries + save_deplibs=$deplibs + deplibs= + fi + + for deplib in $libs; do + lib= + found=false + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test lib = "$linkmode"; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test lib != "$linkmode" && test prog != "$linkmode"; then + func_warning "'-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test lib = "$linkmode"; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib=$searchdir/lib$name$search_ext + if test -f "$lib"; then + if test .la = "$search_ext"; then + found=: + else + found=false + fi + break 2 + fi + done + done + if $found; then + # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll=$l + done + if test "X$ll" = "X$old_library"; then # only static version available + found=false + func_dirname "$lib" "" "." + ladir=$func_dirname_result + lib=$ladir/$old_library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + else + # deplib doesn't seem to be a libtool library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + ;; # -l + *.ltframework) + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test lib = "$linkmode"; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test conv = "$pass" && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test conv = "$pass"; then + deplibs="$deplib $deplibs" + continue + fi + if test scan = "$pass"; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "'-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test link = "$pass"; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test conv = "$pass"; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=false + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=: + fi + ;; + pass_all) + valid_a_lib=: + ;; + esac + if $valid_a_lib; then + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + else + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + fi + ;; + esac + continue + ;; + prog) + if test link != "$pass"; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test conv = "$pass"; then + deplibs="$deplib $deplibs" + elif test prog = "$linkmode"; then + if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=: + continue + ;; + esac # case $deplib + + $found || test -f "$lib" \ + || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "'$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir=$func_dirname_result + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass" || + { test prog != "$linkmode" && test lib != "$linkmode"; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test conv = "$pass"; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for '$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + elif test prog != "$linkmode" && test lib != "$linkmode"; then + func_fatal_error "'$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test yes = "$prefer_static_libs" || + test built,no = "$prefer_static_libs,$installed"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib=$l + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for '$lib'" + fi + + # This library was specified with -dlopen. + if test dlopen = "$pass"; then + test -z "$libdir" \ + && func_fatal_error "cannot -dlopen a convenience library: '$lib'" + if test -z "$dlname" || + test yes != "$dlopen_support" || + test no = "$build_libtool_libs" + then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of '$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir=$ladir + fi + ;; + esac + func_basename "$lib" + laname=$func_basename_result + + # Find the relevant object directory and library name. + if test yes = "$installed"; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library '$lib' was moved." + dir=$ladir + absdir=$abs_ladir + libdir=$abs_ladir + else + dir=$lt_sysroot$libdir + absdir=$lt_sysroot$libdir + fi + test yes = "$hardcode_automatic" && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir=$ladir + absdir=$abs_ladir + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir=$ladir/$objdir + absdir=$abs_ladir/$objdir + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test dlpreopen = "$pass"; then + if test -z "$libdir" && test prog = "$linkmode"; then + func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" + fi + case $host in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test lib = "$linkmode"; then + deplibs="$dir/$old_library $deplibs" + elif test prog,link = "$linkmode,$pass"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test prog = "$linkmode" && test link != "$pass"; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=false + if test no != "$link_all_deplibs" || test -z "$library_names" || + test no = "$build_libtool_libs"; then + linkalldeplibs=: + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if $linkalldeplibs; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test prog,link = "$linkmode,$pass"; then + if test -n "$library_names" && + { { test no = "$prefer_static_libs" || + test built,yes = "$prefer_static_libs,$installed"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then + # Make sure the rpath contains only unique directories. + case $temp_rpath: in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if $alldeplibs && + { test pass_all = "$deplibs_check_method" || + { test yes = "$build_libtool_libs" && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test built = "$use_static_libs" && test yes = "$installed"; then + use_static_libs=no + fi + if test -n "$library_names" && + { test no = "$use_static_libs" || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc* | *os2*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test no = "$installed"; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule= + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule=$dlpremoduletest + break + fi + done + if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then + echo + if test prog = "$linkmode"; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test lib = "$linkmode" && + test yes = "$hardcode_into_libs"; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname=$1 + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname=$dlname + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc* | *os2*) + func_arith $current - $age + major=$func_arith_result + versuffix=-$major + ;; + esac + eval soname=\"$soname_spec\" + else + soname=$realname + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot=$soname + func_basename "$soroot" + soname=$func_basename_result + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from '$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for '$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test prog = "$linkmode" || test relink != "$opt_mode"; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test no = "$hardcode_direct"; then + add=$dir/$linklib + case $host in + *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; + *-*-sysv4*uw2*) add_dir=-L$dir ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir=-L$dir ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we cannot + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library"; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add=$dir/$old_library + fi + elif test -n "$old_library"; then + add=$dir/$old_library + fi + fi + esac + elif test no = "$hardcode_minus_L"; then + case $host in + *-*-sunos*) add_shlibpath=$dir ;; + esac + add_dir=-L$dir + add=-l$name + elif test no = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name + else + lib_linked=no + fi + ;; + relink) + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$dir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$absdir + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test yes != "$lib_linked"; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test prog = "$linkmode"; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test yes != "$hardcode_direct" && + test yes != "$hardcode_minus_L" && + test yes = "$hardcode_shlibpath_var"; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test prog = "$linkmode" || test relink = "$opt_mode"; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$libdir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$libdir + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add=-l$name + elif test yes = "$hardcode_automatic"; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib"; then + add=$inst_prefix_dir$libdir/$linklib + else + add=$libdir/$linklib + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir=-L$libdir + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add=-l$name + fi + + if test prog = "$linkmode"; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test prog = "$linkmode"; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test unsupported != "$hardcode_direct"; then + test -n "$old_library" && linklib=$old_library + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test yes = "$build_libtool_libs"; then + # Not a shared library + if test pass_all != "$deplibs_check_method"; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system cannot link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test yes = "$module"; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** 'nm' from GNU binutils and a full rebuild may help." + fi + if test no = "$build_old_libs"; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test lib = "$linkmode"; then + if test -n "$dependency_libs" && + { test yes != "$hardcode_into_libs" || + test yes = "$build_old_libs" || + test yes = "$link_static"; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs=$temp_deplibs + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test no != "$link_all_deplibs"; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path=$deplib ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of '$dir'" + absdir=$dir + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names"; then + for tmp in $deplibrary_names; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl"; then + depdepl=$absdir/$objdir/$depdepl + darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" + func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" + path= + fi + fi + ;; + *) + path=-L$absdir/$objdir + ;; + esac + else + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "'$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "'$deplib' seems to be moved" + + path=-L$absdir + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test link = "$pass"; then + if test prog = "$linkmode"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs=$newdependency_libs + if test dlpreopen = "$pass"; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test dlopen != "$pass"; then + test conv = "$pass" || { + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + } + + if test prog,link = "$linkmode,$pass"; then + vars="compile_deplibs finalize_deplibs" + else + vars=deplibs + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + + # Add Sun CC postdeps if required: + test CXX = "$tagname" && { + case $host_os in + linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C++ 5.9 + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + + solaris*) + func_cc_basename "$CC" + case $func_cc_basename_result in + CC* | sunCC*) + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + esac + } + + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i= + ;; + esac + if test -n "$i"; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test prog = "$linkmode"; then + dlfiles=$newdlfiles + fi + if test prog = "$linkmode" || test lib = "$linkmode"; then + dlprefiles=$newdlprefiles + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "'-l' and '-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "'-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "'-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "'-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "'-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "'-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs=$output + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form 'libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test no = "$module" \ + && func_fatal_help "libtool library '$output' must begin with 'lib'" + + if test no != "$need_lib_prefix"; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test pass_all != "$deplibs_check_method"; then + func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test no = "$dlself" \ + || func_warning "'-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test 1 -lt "$#" \ + && func_warning "ignoring multiple '-rpath's for a libtool library" + + install_libdir=$1 + + oldlibs= + if test -z "$rpath"; then + if test yes = "$build_libtool_libs"; then + # Building a libtool convenience library. + # Some compilers have problems with a '.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "'-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "'-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs=$IFS; IFS=: + set dummy $vinfo 0 0 0 + shift + IFS=$save_ifs + + test -n "$7" && \ + func_fatal_help "too many parameters to '-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major=$1 + number_minor=$2 + number_revision=$3 + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # that has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|freebsd-elf|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age=$number_minor + revision=$number_revision + ;; + freebsd-aout|qnx|sunos) + current=$number_major + revision=$number_minor + age=0 + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age=$number_minor + revision=$number_minor + lt_irix_increment=no + ;; + esac + ;; + no) + current=$1 + revision=$2 + age=$3 + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT '$current' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION '$revision' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE '$age' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE '$age' is greater than the current interface number '$current'" + func_fatal_error "'$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + # On Darwin other compilers + case $CC in + nagfor*) + verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + ;; + *) + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + esac + ;; + + freebsd-aout) + major=.$current + versuffix=.$current.$revision + ;; + + freebsd-elf) + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision + ;; + + irix | nonstopux) + if test no = "$lt_irix_increment"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring=$verstring_prefix$major.$revision + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test 0 -ne "$loop"; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring=$verstring_prefix$major.$iface:$verstring + done + + # Before this point, $major must not contain '.'. + major=.$major + versuffix=$major.$revision + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=.$current.$age.$revision + verstring=$current.$age.$revision + + # Add in all the interfaces that we are compatible with. + loop=$age + while test 0 -ne "$loop"; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring=$verstring:$iface.0 + done + + # Make executables depend on our current version. + func_append verstring ":$current.0" + ;; + + qnx) + major=.$current + versuffix=.$current + ;; + + sco) + major=.$current + versuffix=.$current + ;; + + sunos) + major=.$current + versuffix=.$current.$revision + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 file systems. + func_arith $current - $age + major=$func_arith_result + versuffix=-$major + ;; + + *) + func_fatal_configuration "unknown library version type '$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring=0.0 + ;; + esac + if test no = "$need_version"; then + versuffix= + else + versuffix=.0.0 + fi + fi + + # Remove version info from name if versioning should be avoided + if test yes,no = "$avoid_version,$need_version"; then + major= + versuffix= + verstring= + fi + + # Check to see if the archive will have undefined symbols. + if test yes = "$allow_undefined"; then + if test unsupported = "$allow_undefined_flag"; then + if test yes = "$build_old_libs"; then + func_warning "undefined symbols not allowed in $host shared libraries; building static only" + build_libtool_libs=no + else + func_fatal_error "can't build $host shared library unless -no-undefined is specified" + fi + fi + else + # Don't allow undefined symbols. + allow_undefined_flag=$no_undefined_flag + fi + + fi + + func_generate_dlsyms "$libname" "$libname" : + func_append libobjs " $symfileobj" + test " " = "$libobjs" && libobjs= + + if test relink != "$opt_mode"; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) + if test -n "$precious_files_regex"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles=$dlfiles + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles=$dlprefiles + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test yes = "$build_libtool_libs"; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test yes = "$build_libtool_need_lc"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release= + versuffix= + major= + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib=$potent_lib + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | $SED 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; + *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib= + break 2 + fi + done + done + fi + if test -n "$a_deplib"; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib"; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib= + ;; + esac + fi + if test -n "$a_deplib"; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib=$potent_lib # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib= + break 2 + fi + done + done + fi + if test -n "$a_deplib"; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib"; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs= + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + for i in $predeps $postdeps; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test none = "$deplibs_check_method"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test yes = "$droppeddeps"; then + if test yes = "$module"; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** 'nm' from GNU binutils and a full rebuild may help." + fi + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test no = "$allow_undefined"; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs=$new_libs + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test yes = "$build_libtool_libs"; then + # Remove $wl instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test yes = "$hardcode_into_libs"; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath=$finalize_rpath + test relink = "$opt_mode" || rpath=$compile_rpath$rpath + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs=$libdir + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir=$hardcode_libdirs + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath=$finalize_shlibpath + test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname=$1 + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname=$realname + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib=$output_objdir/$realname + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols=$output_objdir/$libname.uexp + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + func_dll_def_p "$export_symbols" || { + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols=$export_symbols + export_symbols= + always_export_symbols=yes + } + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs=$IFS; IFS='~' + for cmd1 in $cmds; do + IFS=$save_ifs + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test yes = "$try_normal_branch" \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=$output_objdir/$output_la.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS=$save_ifs + if test -n "$export_symbols_regex" && test : != "$skipped_export"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test : != "$skipped_export" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands, which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs=$tmp_deplibs + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test yes = "$compiler_needs_object" && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test relink = "$opt_mode"; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test yes = "$module" && test -n "$module_cmds"; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test : != "$skipped_export" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then + output=$output_objdir/$output_la.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then + output=$output_objdir/$output_la.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test yes = "$compiler_needs_object"; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-$k.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test -z "$objlist" || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test 1 -eq "$k"; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-$k.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-$k.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + ${skipped_export-false} && { + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + } + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs=$IFS; IFS='~' + for cmd in $concat_cmds; do + IFS=$save_ifs + $opt_quiet || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test relink = "$opt_mode"; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS=$save_ifs + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + ${skipped_export-false} && { + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands, which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + } + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test yes = "$module" && test -n "$module_cmds"; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs=$IFS; IFS='~' + for cmd in $cmds; do + IFS=$sp$nl + eval cmd=\"$cmd\" + IFS=$save_ifs + $opt_quiet || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test relink = "$opt_mode"; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS=$save_ifs + + # Restore the uninstalled library and exit + if test relink = "$opt_mode"; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test yes = "$module" || test yes = "$export_dynamic"; then + # On all known operating systems, these are identical. + dlname=$soname + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "'-l' and '-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "'-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "'-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "'-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "'-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object '$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj=$output + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # if reload_cmds runs $LD directly, get rid of -Wl from + # whole_archive_flag_spec and hope we can get by with turning comma + # into space. + case $reload_cmds in + *\$LD[\ \$]*) wl= ;; + esac + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags + else + gentop=$output_objdir/${obj}x + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test yes = "$build_libtool_libs" || libobjs=$non_pic_objects + + # Create the old-style object. + reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs + + output=$obj + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + test yes = "$build_libtool_libs" || { + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + } + + if test -n "$pic_flag" || test default != "$pic_mode"; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output=$libobj + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "'-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "'-release' is ignored for programs" + + $preload \ + && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ + && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test CXX = "$tagname"; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " $wl-bind_at_load" + func_append finalize_command " $wl-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs=$new_libs + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs=$libdir + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir=$hardcode_libdirs + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath=$rpath + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs=$libdir + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir=$hardcode_libdirs + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath=$rpath + + if test -n "$libobjs" && test yes = "$build_old_libs"; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" false + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=: + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=false + ;; + *cygwin* | *mingw* ) + test yes = "$build_libtool_libs" || wrappers_required=false + ;; + *) + if test no = "$need_relink" || test yes != "$build_libtool_libs"; then + wrappers_required=false + fi + ;; + esac + $wrappers_required || { + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command=$compile_command$compile_rpath + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.$objext"; then + func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' + fi + + exit $exit_status + } + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test yes = "$no_install"; then + # We don't need to create a wrapper script. + link_command=$compile_var$compile_command$compile_rpath + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + case $hardcode_action,$fast_install in + relink,*) + # Fast installation is not supported + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "'$output' will be relinked during installation" + ;; + *,yes) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + ;; + *,no) + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + ;; + *,needless) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command= + ;; + esac + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource=$output_path/$objdir/lt-$output_name.c + cwrapper=$output_path/$output_name.exe + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host"; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + case $build_libtool_libs in + convenience) + oldobjs="$libobjs_save $symfileobj" + addlibs=$convenience + build_libtool_libs=no + ;; + module) + oldobjs=$libobjs_save + addlibs=$old_convenience + build_libtool_libs=no + ;; + *) + oldobjs="$old_deplibs $non_pic_objects" + $preload && test -f "$symfileobj" \ + && func_append oldobjs " $symfileobj" + addlibs=$old_convenience + ;; + esac + + if test -n "$addlibs"; then + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase=$func_basename_result + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj"; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test -z "$oldobjs"; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test yes = "$build_old_libs" && old_library=$libname.$libext + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test yes = "$hardcode_automatic"; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test yes = "$installed"; then + if test -z "$install_libdir"; then + break + fi + output=$output_objdir/${outputname}i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name=$func_basename_result + func_resolve_sysroot "$deplib" + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "'$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs=$newdependency_libs + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "'$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles=$newdlfiles + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "'$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles=$newdlprefiles + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles=$newdlfiles + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles=$newdlprefiles + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test -n "$bindir"; then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result/$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that cannot go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test no,yes = "$installed,$need_relink"; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +if test link = "$opt_mode" || test relink = "$opt_mode"; then + func_mode_link ${1+"$@"} +fi + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $debug_cmd + + RM=$nonopt + files= + rmforce=false + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic=$magic + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=: ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir=$func_dirname_result + if test . = "$dir"; then + odir=$objdir + else + odir=$dir/$objdir + fi + func_basename "$file" + name=$func_basename_result + test uninstall = "$opt_mode" && odir=$dir + + # Remember odir for removal later, being careful to avoid duplicates + if test clean = "$opt_mode"; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif $rmforce; then + continue + fi + + rmfiles=$file + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case $opt_mode in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && test none != "$pic_object"; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && test none != "$non_pic_object"; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test clean = "$opt_mode"; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.$objext" + if test yes = "$fast_install" && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name"; then + func_append rmfiles " $odir/lt-$noexename.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the $objdir's in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then + func_mode_uninstall ${1+"$@"} +fi + +test -z "$opt_mode" && { + help=$generic_help + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode '$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# where we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/jpeg-9d/makcjpeg.st b/jpeg-9d/makcjpeg.st new file mode 100644 index 0000000..628f533 --- /dev/null +++ b/jpeg-9d/makcjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to cjpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +cjpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/jpeg-9d/makdjpeg.st b/jpeg-9d/makdjpeg.st new file mode 100644 index 0000000..4b61404 --- /dev/null +++ b/jpeg-9d/makdjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to djpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +djpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/jpeg-9d/makeadsw.vc6 b/jpeg-9d/makeadsw.vc6 new file mode 100644 index 0000000..b44838f --- /dev/null +++ b/jpeg-9d/makeadsw.vc6 @@ -0,0 +1,77 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GELSCHT WERDEN! + +############################################################################### + +Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/jpeg-9d/makecdep.vc6 b/jpeg-9d/makecdep.vc6 new file mode 100644 index 0000000..32443db --- /dev/null +++ b/jpeg-9d/makecdep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abhngigkeitsdatei, einbezogen von cjpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\cjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/jpeg-9d/makecdsp.vc6 b/jpeg-9d/makecdsp.vc6 new file mode 100644 index 0000000..c00491d --- /dev/null +++ b/jpeg-9d/makecdsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="cjpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=cjpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak". +!MESSAGE +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\cjpeg\Release" +# PROP BASE Intermediate_Dir ".\cjpeg\Release" +# PROP BASE Target_Dir ".\cjpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release\cjpeg" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\cjpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "cjpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\cjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdbmp.c +# End Source File +# Begin Source File + +SOURCE=.\rdgif.c +# End Source File +# Begin Source File + +SOURCE=.\rdppm.c +# End Source File +# Begin Source File + +SOURCE=.\rdrle.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\rdtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/jpeg-9d/makecmak.vc6 b/jpeg-9d/makecmak.vc6 new file mode 100644 index 0000000..74a230e --- /dev/null +++ b/jpeg-9d/makecmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on cjpeg.dsp +!IF "$(CFG)" == "" +CFG=cjpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. cjpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "cjpeg - Win32" +!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungltige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\cjpeg\Release +INTDIR=.\cjpeg\Release +# Begin Custom Macros +OutDir=.\cjpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\cjpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\cjpeg.obj" + -@erase "$(INTDIR)\rdbmp.obj" + -@erase "$(INTDIR)\rdgif.obj" + -@erase "$(INTDIR)\rdppm.obj" + -@erase "$(INTDIR)\rdrle.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\rdtarga.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\cjpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\cjpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)\cjpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\cjpeg.obj" \ + "$(INTDIR)\rdbmp.obj" \ + "$(INTDIR)\rdgif.obj" \ + "$(INTDIR)\rdppm.obj" \ + "$(INTDIR)\rdrle.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\rdtarga.obj" + +"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\cjpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("cjpeg.dep") +!INCLUDE "cjpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "cjpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "cjpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\cjpeg.c + +"$(INTDIR)\cjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdbmp.c + +"$(INTDIR)\rdbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdgif.c + +"$(INTDIR)\rdgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdppm.c + +"$(INTDIR)\rdppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdrle.c + +"$(INTDIR)\rdrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdtarga.c + +"$(INTDIR)\rdtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/jpeg-9d/makeddep.vc6 b/jpeg-9d/makeddep.vc6 new file mode 100644 index 0000000..4d2b3ad --- /dev/null +++ b/jpeg-9d/makeddep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abhngigkeitsdatei, einbezogen von djpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\djpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdcolmap.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/jpeg-9d/makeddsp.vc6 b/jpeg-9d/makeddsp.vc6 new file mode 100644 index 0000000..f9fdce3 --- /dev/null +++ b/jpeg-9d/makeddsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="djpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=djpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak". +!MESSAGE +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\djpeg\Release" +# PROP BASE Intermediate_Dir ".\djpeg\Release" +# PROP BASE Target_Dir ".\djpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release\djpeg" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\djpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "djpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\djpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdcolmap.c +# End Source File +# Begin Source File + +SOURCE=.\wrbmp.c +# End Source File +# Begin Source File + +SOURCE=.\wrgif.c +# End Source File +# Begin Source File + +SOURCE=.\wrppm.c +# End Source File +# Begin Source File + +SOURCE=.\wrrle.c +# End Source File +# Begin Source File + +SOURCE=.\wrtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/jpeg-9d/makedmak.vc6 b/jpeg-9d/makedmak.vc6 new file mode 100644 index 0000000..5d7e778 --- /dev/null +++ b/jpeg-9d/makedmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on djpeg.dsp +!IF "$(CFG)" == "" +CFG=djpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. djpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "djpeg - Win32" +!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungltige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\djpeg\Release +INTDIR=.\djpeg\Release +# Begin Custom Macros +OutDir=.\djpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\djpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\djpeg.obj" + -@erase "$(INTDIR)\rdcolmap.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrbmp.obj" + -@erase "$(INTDIR)\wrgif.obj" + -@erase "$(INTDIR)\wrppm.obj" + -@erase "$(INTDIR)\wrrle.obj" + -@erase "$(INTDIR)\wrtarga.obj" + -@erase "$(OUTDIR)\djpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\djpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\djpeg.pdb" /machine:I386 /out:"$(OUTDIR)\djpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\djpeg.obj" \ + "$(INTDIR)\rdcolmap.obj" \ + "$(INTDIR)\wrbmp.obj" \ + "$(INTDIR)\wrgif.obj" \ + "$(INTDIR)\wrppm.obj" \ + "$(INTDIR)\wrrle.obj" \ + "$(INTDIR)\wrtarga.obj" + +"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\djpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("djpeg.dep") +!INCLUDE "djpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "djpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "djpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\djpeg.c + +"$(INTDIR)\djpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdcolmap.c + +"$(INTDIR)\rdcolmap.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrbmp.c + +"$(INTDIR)\wrbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrgif.c + +"$(INTDIR)\wrgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrppm.c + +"$(INTDIR)\wrppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrrle.c + +"$(INTDIR)\wrrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrtarga.c + +"$(INTDIR)\wrtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/jpeg-9d/makefile.ansi b/jpeg-9d/makefile.ansi new file mode 100644 index 0000000..cb695c5 --- /dev/null +++ b/jpeg-9d/makefile.ansi @@ -0,0 +1,223 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Unix-like systems with ANSI-capable compilers. +# If you have a non-ANSI compiler, makefile.unix is a better starting point. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +CFLAGS= -O +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= rm -f +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom + $(RM) core testout* + +test: cjpeg djpeg jpegtran + $(RM) testout* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -gif -outfile testout.gif testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.gif testout.gif + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makefile.b32 b/jpeg-9d/makefile.b32 new file mode 100644 index 0000000..083e56d --- /dev/null +++ b/jpeg-9d/makefile.b32 @@ -0,0 +1,245 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Borland C on MS-DOS. +# It works with Borland C++ 32-bit for DOS, revision 5.0 or later. +# Thanks to Tom Wright and Ge' Weijers (original DOS) and +# Joe Slater for adding 32-bit additions (needed for Borland +# revision 5.5). + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= bcc32 + +# You may need to adjust these cc options: +CFLAGS= -O2 -w-par -w-stu -w-ccc -w-rch -w-aus +# -w-par suppresses warnings about unused function parameters +# -w-stu suppresses warnings about incomplete structures +# -w-ccc suppresses warnings about compile-time-constant conditions +# -w-rch suppresses warnings about unreachable code +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= +# -lc case-significant link + +# Put here the object file name for the correct system-dependent memory +# manager file. +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +SYSDEPMEM= jmemnobs.obj +SYSDEPMEMLIB= +jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + tlib libjpeg.lib /E /C @&&| ++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & ++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & ++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & ++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & ++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & ++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & ++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & ++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & ++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & +$(SYSDEPMEMLIB) +| + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c + $(CC) $(CFLAGS) rdjpgcom.c + +wrjpgcom.exe: wrjpgcom.c + $(CC) $(CFLAGS) wrjpgcom.c + +# This "{}" syntax allows Borland Make to "batch" source files. +# In this way, each run of the compiler can build many modules. +.c.obj: + $(CC) $(CFLAGS) -c{ $<} + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -gif -outfile testout.gif testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.gif testout.gif < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj: jmemdosa.asm + tasm /mx jmemdosa.asm diff --git a/jpeg-9d/makefile.bcc b/jpeg-9d/makefile.bcc new file mode 100644 index 0000000..16b640a --- /dev/null +++ b/jpeg-9d/makefile.bcc @@ -0,0 +1,295 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Borland C on MS-DOS or OS/2. +# It works with Borland C++ for DOS, revision 3.0 or later, +# and has been tested with Borland C++ for OS/2. +# Watch out for optimization bugs in the OS/2 compilers --- see notes below! +# Thanks to Tom Wright and Ge' Weijers (original DOS) and +# Ken Porter (OS/2) for this file. + +# Read installation instructions before saying "make" !! + +# Are we under DOS or OS/2? +!if !$d(DOS) && !$d(OS2) +!if $d(__OS2__) +OS2=1 +!else +DOS=1 +!endif +!endif + +# The name of your C compiler: +CC= bcc + +# You may need to adjust these cc options: +!if $d(DOS) +CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch +!else +CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch +!endif +# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z). +# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now. +# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all. +# -mm selects medium memory model (near data, far code pointers; DOS only!) +# -w-par suppresses warnings about unused function parameters +# -w-stu suppresses warnings about incomplete structures +# -w-ccc suppresses warnings about compile-time-constant conditions +# -w-rch suppresses warnings about unreachable code +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!if $d(DOS) +LDFLAGS= -mm +# memory model option here must match CFLAGS! +!else +LDFLAGS= +# -lai full-screen app +# -lc case-significant link +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. +# For DOS, we recommend jmemdos.c and jmemdosa.asm. +# For OS/2, we recommend jmemnobs.c (flat memory!) +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +!if $d(DOS) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj +!else +SYSDEPMEM= jmemnobs.obj +SYSDEPMEMLIB= +jmemnobs.obj +!endif + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + tlib libjpeg.lib /E /C @&&| ++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & ++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & ++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & ++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & ++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & ++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & ++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & ++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & ++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & +$(SYSDEPMEMLIB) +| + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c +!if $d(DOS) + $(CC) -ms -O rdjpgcom.c +!else + $(CC) $(CFLAGS) rdjpgcom.c +!endif + +# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c +!if $d(DOS) + $(CC) -ml -O wrjpgcom.c +!else + $(CC) $(CFLAGS) wrjpgcom.c +!endif + +# This "{}" syntax allows Borland Make to "batch" source files. +# In this way, each run of the compiler can build many modules. +.c.obj: + $(CC) $(CFLAGS) -c{ $<} + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -gif -outfile testout.gif testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!if $d(DOS) + fc /b testimg.ppm testout.ppm + fc /b testimg.gif testout.gif + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.gif testout.gif < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj: jmemdosa.asm + tasm /mx jmemdosa.asm diff --git a/jpeg-9d/makefile.dj b/jpeg-9d/makefile.dj new file mode 100644 index 0000000..3872491 --- /dev/null +++ b/jpeg-9d/makefile.dj @@ -0,0 +1,229 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later. +# Thanks to Frank J. Donahoe for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= gcc + +# You may need to adjust these cc options: +CFLAGS= -O2 -Wall -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= -s + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For DJGPP this is usually jmemnobs.o, but you could +# use jmemname.o if you want to use named temp files instead of swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= del +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg.exe: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o + $(RM) cjpeg.exe + $(RM) djpeg.exe + $(RM) jpegtran.exe + $(RM) rdjpgcom.exe + $(RM) wrjpgcom.exe + $(RM) libjpeg.a + $(RM) testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + $(RM) testout*.* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -gif -outfile testout.gif testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.gif testout.gif + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makefile.manx b/jpeg-9d/makefile.manx new file mode 100644 index 0000000..4776b63 --- /dev/null +++ b/jpeg-9d/makefile.manx @@ -0,0 +1,223 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using Manx Aztec C ver 5.x. +# Thanks to D.J. James (djjames@cup.portal.com) for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +# Uncomment for generic 68000 code (will work on any Amiga) +ARCHFLAGS= -sn + +# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU) +#ARCHFLAGS= -c2 + +CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4 + +# Link-time cc options: +LDFLAGS= -g + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= -lml -lcl + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= ln +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= lb + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib $(LIBOBJECTS) + +cjpeg: $(COBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom + -$(RM) core testout*.* + +test: cjpeg djpeg jpegtran + -$(RM) testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -gif -outfile testout.gif testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.gif testout.gif + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makefile.mc6 b/jpeg-9d/makefile.mc6 new file mode 100644 index 0000000..7e155f5 --- /dev/null +++ b/jpeg-9d/makefile.mc6 @@ -0,0 +1,258 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Microsoft C for MS-DOS, version 6.00A and up. +# Use NMAKE, not Microsoft's brain-damaged MAKE. +# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd. + +# Read installation instructions before saying "nmake" !! + +# You may need to adjust these compiler options: +CFLAGS = -AM -Oecigt -Gs -W3 +# -AM medium memory model (or use -AS for small model, if you remove features) +# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A) +# -W3 warning level 3 +# You might also want to add -G2 if you have an 80286, etc. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486: +# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \ +# /OV4 /W3 +# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler +# crash. + +# Ingar Steinsland suggests the following switches when building +# a 16-bit Windows DLL: +# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd + +# Put here the object file name for the correct system-dependent memory +# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm. +# (But not for Windows; see install.txt if you use this makefile for Windows.) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# need linker response file because file list > 128 chars +RFILE = libjpeg.ans + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) $(RFILE) + del libjpeg.lib + lib @$(RFILE) + +# linker response file for building libjpeg.lib +$(RFILE) : makefile + del $(RFILE) + echo libjpeg.lib >$(RFILE) +# silly want-to-create-it prompt: + echo y >>$(RFILE) + echo +jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj & >>$(RFILE) + echo +jcparam.obj +jdatadst.obj +jcinit.obj +jcmaster.obj & >>$(RFILE) + echo +jcmarker.obj +jcmainct.obj +jcprepct.obj & >>$(RFILE) + echo +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & >>$(RFILE) + echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE) + echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE) + echo +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & >>$(RFILE) + echo +jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj & >>$(RFILE) + echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE) + echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE) + echo +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE) + echo +jquant2.obj +jdmerge.obj +jaricom.obj +jcomapi.obj & >>$(RFILE) + echo +jutils.obj +jerror.obj +jmemmgr.obj & >>$(RFILE) + echo $(SYSDEPMEMLIB) ; >>$(RFILE) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + echo $(COBJECTS) >cjpeg.lst + link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ; + del cjpeg.lst + +djpeg.exe: $(DOBJECTS) libjpeg.lib + echo $(DOBJECTS) >djpeg.lst + link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ; + del djpeg.lst + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ; + +rdjpgcom.exe: rdjpgcom.c + $(CC) -AS -O -W3 rdjpgcom.c + +# wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c + $(CC) -AL -O -W3 wrjpgcom.c + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + del *.obj + del libjpeg.lib + del cjpeg.exe + del djpeg.exe + del jpegtran.exe + del rdjpgcom.exe + del wrjpgcom.exe + del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -gif -outfile testout.gif testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.gif testout.gif + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj : jmemdosa.asm + masm /mx $*; diff --git a/jpeg-9d/makefile.mms b/jpeg-9d/makefile.mms new file mode 100644 index 0000000..0e616bb --- /dev/null +++ b/jpeg-9d/makefile.mms @@ -0,0 +1,227 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for use with MMS on Digital VMS systems. +# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +# and Tim Bell (tbell@netcom.com) for their help. + +# Read installation instructions before saying "MMS" !! + +# You may need to adjust these cc options: +CFLAGS= $(CFLAGS) /NoDebug /Optimize +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via /Define switches here. +.ifdef ALPHA +OPT= +.else +OPT= ,Sys$Disk:[]MAKVMS.OPT/Option +.endif + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.olb +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj +# objectfile lists with commas --- what a crock +COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\ + rdswitch.obj,cdjpeg.obj +DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\ + rdcolmap.obj,cdjpeg.obj +TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj +LIBOBJLIST= jaricom.obj,jcapimin.obj,jcapistd.obj,jcarith.obj,jctrans.obj,\ + jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj,\ + jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj,\ + jchuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,\ + jdapimin.obj,jdapistd.obj,jdarith.obj,jdtrans.obj,jdatasrc.obj,\ + jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdmainct.obj,\ + jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,\ + jidctint.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\ + jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM) + + +.first + @- Define /NoLog Sys Sys$Library + +ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + @ Continue + +libjpeg.olb : $(LIBOBJECTS) + Library /Create libjpeg.olb $(LIBOBJLIST) + +cjpeg.exe : $(COBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT) + +djpeg.exe : $(DOBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT) + +jpegtran.exe : $(TROBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT) + +rdjpgcom.exe : rdjpgcom.obj + $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT) + +wrjpgcom.exe : wrjpgcom.obj + $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT) + +jconfig.h : jconfig.vms + @- Copy jconfig.vms jconfig.h + +clean : + @- Set Protection = Owner:RWED *.*;-1 + @- Set Protection = Owner:RWED *.OBJ + - Purge /NoLog /NoConfirm *.* + - Delete /NoLog /NoConfirm *.OBJ; + +test : cjpeg.exe djpeg.exe jpegtran.exe + mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + mcr sys$disk:[]djpeg -dct int -gif -outfile testout.gif testorig.jpg + mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm + mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg + - Backup /Compare/Log testimg.ppm testout.ppm + - Backup /Compare/Log testimg.gif testout.gif + - Backup /Compare/Log testimg.bmp testout.bmp + - Backup /Compare/Log testimg.jpg testout.jpg + - Backup /Compare/Log testimg.ppm testoutp.ppm + - Backup /Compare/Log testimgp.jpg testoutp.jpg + - Backup /Compare/Log testorig.jpg testoutt.jpg + + +jaricom.obj : jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj : jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj : jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makefile.sas b/jpeg-9d/makefile.sas new file mode 100644 index 0000000..f5beb1f --- /dev/null +++ b/jpeg-9d/makefile.sas @@ -0,0 +1,261 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using SAS C 6.0 and up. +# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= sc + +# You may need to adjust these cc options: +# Uncomment the following lines for generic 680x0 version +ARCHFLAGS= cpu=any +SUFFIX= + +# Uncomment the following lines for 68030-only version +#ARCHFLAGS= cpu=68030 +#SUFFIX=.030 + +CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \ + ignore=104 ignore=304 ignore=306 +# ignore=104 disables warnings for mismatched const qualifiers +# ignore=304 disables warnings for variables being optimized out +# ignore=306 disables warnings for the inlining of functions +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via define switches here. + +# Link-time cc options: +LDFLAGS= SC SD ND BATCH + +# To link any special libraries, add the necessary commands here. +LDLIBS= LIB:scm.lib LIB:sc.lib + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= slink +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= oml + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX) + +# note: do several AR steps to avoid command line length limitations + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib r $(CLIBOBJECTS) + $(AR) libjpeg.lib r $(DLIBOBJECTS) + $(AR) libjpeg.lib r $(COMOBJECTS) + +cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib + $(LN) + +# You may want to adjust these compiler options: +CFLAGS= $(cflags) $(cdebug) $(cvars) -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time options: +LDFLAGS= $(ldebug) $(conlflags) + +# To link any special libraries, add the necessary commands here. +LDLIBS= $(conlibs) + +# Put here the object file name for the correct system-dependent memory +# manager file. For NT we suggest jmemnobs.obj, which expects the OS to +# provide adequate virtual memory. +SYSDEPMEM= jmemnobs.obj + +# miscellaneous OS-dependent stuff +# file deletion command +RM= del + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# Template command for compiling .c to .obj +.c.obj: + $(cc) $(CFLAGS) $*.c + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + $(RM) libjpeg.lib + lib -out:libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.obj + $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.obj + $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) + + +clean: + $(RM) *.obj *.exe libjpeg.lib + $(RM) testout* + +setup-vc6: + ren jconfig.vc jconfig.h + ren makejdsw.vc6 jpeg.dsw + ren makeadsw.vc6 apps.dsw + ren makejmak.vc6 jpeg.mak + ren makejdep.vc6 jpeg.dep + ren makejdsp.vc6 jpeg.dsp + ren makecmak.vc6 cjpeg.mak + ren makecdep.vc6 cjpeg.dep + ren makecdsp.vc6 cjpeg.dsp + ren makedmak.vc6 djpeg.mak + ren makeddep.vc6 djpeg.dep + ren makeddsp.vc6 djpeg.dsp + ren maketmak.vc6 jpegtran.mak + ren maketdep.vc6 jpegtran.dep + ren maketdsp.vc6 jpegtran.dsp + ren makermak.vc6 rdjpgcom.mak + ren makerdep.vc6 rdjpgcom.dep + ren makerdsp.vc6 rdjpgcom.dsp + ren makewmak.vc6 wrjpgcom.mak + ren makewdep.vc6 wrjpgcom.dep + ren makewdsp.vc6 wrjpgcom.dsp + +setupcopy-vc6: + copy /y jconfig.vc jconfig.h + copy /y makejdsw.vc6 jpeg.dsw + copy /y makeadsw.vc6 apps.dsw + copy /y makejmak.vc6 jpeg.mak + copy /y makejdep.vc6 jpeg.dep + copy /y makejdsp.vc6 jpeg.dsp + copy /y makecmak.vc6 cjpeg.mak + copy /y makecdep.vc6 cjpeg.dep + copy /y makecdsp.vc6 cjpeg.dsp + copy /y makedmak.vc6 djpeg.mak + copy /y makeddep.vc6 djpeg.dep + copy /y makeddsp.vc6 djpeg.dsp + copy /y maketmak.vc6 jpegtran.mak + copy /y maketdep.vc6 jpegtran.dep + copy /y maketdsp.vc6 jpegtran.dsp + copy /y makermak.vc6 rdjpgcom.mak + copy /y makerdep.vc6 rdjpgcom.dep + copy /y makerdsp.vc6 rdjpgcom.dsp + copy /y makewmak.vc6 wrjpgcom.mak + copy /y makewdep.vc6 wrjpgcom.dep + copy /y makewdsp.vc6 wrjpgcom.dsp + +setup-v16: + ren jconfig.vc jconfig.h + ren makejsln.v16 jpeg.sln + ren makeasln.v16 apps.sln + ren makejvcx.v16 jpeg.vcxproj + ren makejfil.v16 jpeg.vcxproj.filters + ren makecvcx.v16 cjpeg.vcxproj + ren makecfil.v16 cjpeg.vcxproj.filters + ren makedvcx.v16 djpeg.vcxproj + ren makedfil.v16 djpeg.vcxproj.filters + ren maketvcx.v16 jpegtran.vcxproj + ren maketfil.v16 jpegtran.vcxproj.filters + ren makervcx.v16 rdjpgcom.vcxproj + ren makerfil.v16 rdjpgcom.vcxproj.filters + ren makewvcx.v16 wrjpgcom.vcxproj + ren makewfil.v16 wrjpgcom.vcxproj.filters + +setupcopy-v16: + copy /y jconfig.vc jconfig.h + copy /y makejsln.v16 jpeg.sln + copy /y makeasln.v16 apps.sln + copy /y makejvcx.v16 jpeg.vcxproj + copy /y makejfil.v16 jpeg.vcxproj.filters + copy /y makecvcx.v16 cjpeg.vcxproj + copy /y makecfil.v16 cjpeg.vcxproj.filters + copy /y makedvcx.v16 djpeg.vcxproj + copy /y makedfil.v16 djpeg.vcxproj.filters + copy /y maketvcx.v16 jpegtran.vcxproj + copy /y maketfil.v16 jpegtran.vcxproj.filters + copy /y makervcx.v16 rdjpgcom.vcxproj + copy /y makerfil.v16 rdjpgcom.vcxproj.filters + copy /y makewvcx.v16 wrjpgcom.vcxproj + copy /y makewfil.v16 wrjpgcom.vcxproj.filters + +test: + IF EXIST testout* $(RM) testout* + .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg -dct int -gif -outfile testout.gif testorig.jpg + .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.gif testout.gif + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + +test-build: + IF EXIST .\Release\testout* $(RM) .\Release\testout* + .\Release\djpeg -dct int -ppm -outfile .\Release\testout.ppm testorig.jpg + .\Release\djpeg -dct int -gif -outfile .\Release\testout.gif testorig.jpg + .\Release\djpeg -dct int -bmp -colors 256 -outfile .\Release\testout.bmp testorig.jpg + .\Release\cjpeg -dct int -outfile .\Release\testout.jpg testimg.ppm + .\Release\djpeg -dct int -ppm -outfile .\Release\testoutp.ppm testprog.jpg + .\Release\cjpeg -dct int -progressive -opt -outfile .\Release\testoutp.jpg testimg.ppm + .\Release\jpegtran -outfile .\Release\testoutt.jpg testprog.jpg + fc /b testimg.ppm .\Release\testout.ppm + fc /b testimg.gif .\Release\testout.gif + fc /b testimg.bmp .\Release\testout.bmp + fc /b testimg.jpg .\Release\testout.jpg + fc /b testimg.ppm .\Release\testoutp.ppm + fc /b testimgp.jpg .\Release\testoutp.jpg + fc /b testorig.jpg .\Release\testoutt.jpg + +test-32: + IF EXIST .\Release\testout* $(RM) .\Release\testout* + .\Release\Win32\djpeg -dct int -ppm -outfile .\Release\testout.ppm testorig.jpg + .\Release\Win32\djpeg -dct int -gif -outfile .\Release\testout.gif testorig.jpg + .\Release\Win32\djpeg -dct int -bmp -colors 256 -outfile .\Release\testout.bmp testorig.jpg + .\Release\Win32\cjpeg -dct int -outfile .\Release\testout.jpg testimg.ppm + .\Release\Win32\djpeg -dct int -ppm -outfile .\Release\testoutp.ppm testprog.jpg + .\Release\Win32\cjpeg -dct int -progressive -opt -outfile .\Release\testoutp.jpg testimg.ppm + .\Release\Win32\jpegtran -outfile .\Release\testoutt.jpg testprog.jpg + fc /b testimg.ppm .\Release\testout.ppm + fc /b testimg.gif .\Release\testout.gif + fc /b testimg.bmp .\Release\testout.bmp + fc /b testimg.jpg .\Release\testout.jpg + fc /b testimg.ppm .\Release\testoutp.ppm + fc /b testimgp.jpg .\Release\testoutp.jpg + fc /b testorig.jpg .\Release\testoutt.jpg + +test-64: + IF EXIST .\Release\testout* $(RM) .\Release\testout* + .\Release\x64\djpeg -dct int -ppm -outfile .\Release\testout.ppm testorig.jpg + .\Release\x64\djpeg -dct int -gif -outfile .\Release\testout.gif testorig.jpg + .\Release\x64\djpeg -dct int -bmp -colors 256 -outfile .\Release\testout.bmp testorig.jpg + .\Release\x64\cjpeg -dct int -outfile .\Release\testout.jpg testimg.ppm + .\Release\x64\djpeg -dct int -ppm -outfile .\Release\testoutp.ppm testprog.jpg + .\Release\x64\cjpeg -dct int -progressive -opt -outfile .\Release\testoutp.jpg testimg.ppm + .\Release\x64\jpegtran -outfile .\Release\testoutt.jpg testprog.jpg + fc /b testimg.ppm .\Release\testout.ppm + fc /b testimg.gif .\Release\testout.gif + fc /b testimg.bmp .\Release\testout.bmp + fc /b testimg.jpg .\Release\testout.jpg + fc /b testimg.ppm .\Release\testoutp.ppm + fc /b testimgp.jpg .\Release\testoutp.jpg + fc /b testorig.jpg .\Release\testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makefile.vms b/jpeg-9d/makefile.vms new file mode 100644 index 0000000..a07d070 --- /dev/null +++ b/jpeg-9d/makefile.vms @@ -0,0 +1,142 @@ +$! Makefile for Independent JPEG Group's software +$! +$! This is a command procedure for Digital VMS systems that do not have MMS. +$! It builds the JPEG software by brute force, recompiling everything whether +$! or not it is necessary. It then runs the basic self-test. +$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +$! and Tim Bell (tbell@netcom.com) for their help. +$! +$! Read installation instructions before running this!! +$! +$ If F$Mode () .eqs. "INTERACTIVE" +$ Then +$ VERIFY = F$Verify (0) +$ Else +$ VERIFY = F$Verify (1) +$ EndIf +$ On Control_Y Then GoTo End +$ On Error Then GoTo End +$ +$ If F$GetSyi ("HW_MODEL") .gt. 1023 +$ Then +$ OPT = "" +$ Else +$ OPT = ",Sys$Disk:[]makvms.opt/Option" +$ EndIf +$ +$ DoCompile := CC /NoDebug /Optimize /NoList +$! +$ DoCompile jaricom.c +$ DoCompile jcapimin.c +$ DoCompile jcapistd.c +$ DoCompile jcarith.c +$ DoCompile jctrans.c +$ DoCompile jcparam.c +$ DoCompile jdatadst.c +$ DoCompile jcinit.c +$ DoCompile jcmaster.c +$ DoCompile jcmarker.c +$ DoCompile jcmainct.c +$ DoCompile jcprepct.c +$ DoCompile jccoefct.c +$ DoCompile jccolor.c +$ DoCompile jcsample.c +$ DoCompile jchuff.c +$ DoCompile jcdctmgr.c +$ DoCompile jfdctfst.c +$ DoCompile jfdctflt.c +$ DoCompile jfdctint.c +$ DoCompile jdapimin.c +$ DoCompile jdapistd.c +$ DoCompile jdarith.c +$ DoCompile jdtrans.c +$ DoCompile jdatasrc.c +$ DoCompile jdmaster.c +$ DoCompile jdinput.c +$ DoCompile jdmarker.c +$ DoCompile jdhuff.c +$ DoCompile jdmainct.c +$ DoCompile jdcoefct.c +$ DoCompile jdpostct.c +$ DoCompile jddctmgr.c +$ DoCompile jidctfst.c +$ DoCompile jidctflt.c +$ DoCompile jidctint.c +$ DoCompile jdsample.c +$ DoCompile jdcolor.c +$ DoCompile jquant1.c +$ DoCompile jquant2.c +$ DoCompile jdmerge.c +$ DoCompile jcomapi.c +$ DoCompile jutils.c +$ DoCompile jerror.c +$ DoCompile jmemmgr.c +$ DoCompile jmemnobs.c +$! +$ Library /Create libjpeg.olb jaricom.obj,jcapimin.obj,jcapistd.obj, - + jcarith.obj,jctrans.obj,jcparam.obj,jdatadst.obj,jcinit.obj, - + jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,jccoefct.obj, - + jccolor.obj,jcsample.obj,jchuff.obj,jcdctmgr.obj,jfdctfst.obj, - + jfdctflt.obj,jfdctint.obj,jdapimin.obj,jdapistd.obj,jdarith.obj, - + jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,jdmarker.obj, - + jdhuff.obj,jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj, - + jidctfst.obj,jidctflt.obj,jidctint.obj,jdsample.obj,jdcolor.obj, - + jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, - + jerror.obj,jmemmgr.obj,jmemnobs.obj +$! +$ DoCompile cjpeg.c +$ DoCompile rdppm.c +$ DoCompile rdgif.c +$ DoCompile rdtarga.c +$ DoCompile rdrle.c +$ DoCompile rdbmp.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, - + rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile djpeg.c +$ DoCompile wrppm.c +$ DoCompile wrgif.c +$ DoCompile wrtarga.c +$ DoCompile wrrle.c +$ DoCompile wrbmp.c +$ DoCompile rdcolmap.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, - + wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile jpegtran.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$ DoCompile transupp.c +$! +$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, - + cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile rdjpgcom.c +$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT' +$! +$ DoCompile wrjpgcom.c +$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT' +$! +$! Run the self-test +$! +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg +$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg +$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg +$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm +$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg +$ Backup /Compare/Log testimg.ppm testout.ppm +$ Backup /Compare/Log testimg.bmp testout.bmp +$ Backup /Compare/Log testimg.jpg testout.jpg +$ Backup /Compare/Log testimg.ppm testoutp.ppm +$ Backup /Compare/Log testimgp.jpg testoutp.jpg +$ Backup /Compare/Log testorig.jpg testoutt.jpg +$! +$End: +$ If Verify Then Set Verify +$ Exit diff --git a/jpeg-9d/makefile.vs b/jpeg-9d/makefile.vs new file mode 100644 index 0000000..bb10fcb --- /dev/null +++ b/jpeg-9d/makefile.vs @@ -0,0 +1,351 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Microsoft Visual C++ on Windows NT (and 95?). +# It builds the IJG library as a statically linkable library (.LIB), +# and builds the sample applications as console-mode apps. +# Thanks to Xingong Chang, Raymond Everly and others. + +# Read installation instructions before saying "nmake" !! +# To build an optimized library without debug info, say "nmake nodebug=1". + +# Pull in standard variable definitions +#!include + +# You may want to adjust these compiler options: +CFLAGS= $(cflags) $(cdebug) $(cvars) -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time options: +LDFLAGS= $(ldebug) $(conlflags) + +# To link any special libraries, add the necessary commands here. +LDLIBS= $(conlibs) + +# Put here the object file name for the correct system-dependent memory +# manager file. For NT we suggest jmemnobs.obj, which expects the OS to +# provide adequate virtual memory. +SYSDEPMEM= jmemnobs.obj + +# miscellaneous OS-dependent stuff +# file deletion command +RM= del + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \ + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \ + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \ + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \ + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 \ + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 \ + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 \ + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \ + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg \ + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# Template command for compiling .c to .obj +.c.obj: + $(cc) $(CFLAGS) $*.c + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + $(RM) libjpeg.lib + lib -out:libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.obj + $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.obj + $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) + + +clean: + $(RM) *.obj *.exe libjpeg.lib + $(RM) testout* + +setup-vc6: + ren jconfig.vc jconfig.h + ren makejdsw.vc6 jpeg.dsw + ren makeadsw.vc6 apps.dsw + ren makejmak.vc6 jpeg.mak + ren makejdep.vc6 jpeg.dep + ren makejdsp.vc6 jpeg.dsp + ren makecmak.vc6 cjpeg.mak + ren makecdep.vc6 cjpeg.dep + ren makecdsp.vc6 cjpeg.dsp + ren makedmak.vc6 djpeg.mak + ren makeddep.vc6 djpeg.dep + ren makeddsp.vc6 djpeg.dsp + ren maketmak.vc6 jpegtran.mak + ren maketdep.vc6 jpegtran.dep + ren maketdsp.vc6 jpegtran.dsp + ren makermak.vc6 rdjpgcom.mak + ren makerdep.vc6 rdjpgcom.dep + ren makerdsp.vc6 rdjpgcom.dsp + ren makewmak.vc6 wrjpgcom.mak + ren makewdep.vc6 wrjpgcom.dep + ren makewdsp.vc6 wrjpgcom.dsp + +setupcopy-vc6: + copy /y jconfig.vc jconfig.h + copy /y makejdsw.vc6 jpeg.dsw + copy /y makeadsw.vc6 apps.dsw + copy /y makejmak.vc6 jpeg.mak + copy /y makejdep.vc6 jpeg.dep + copy /y makejdsp.vc6 jpeg.dsp + copy /y makecmak.vc6 cjpeg.mak + copy /y makecdep.vc6 cjpeg.dep + copy /y makecdsp.vc6 cjpeg.dsp + copy /y makedmak.vc6 djpeg.mak + copy /y makeddep.vc6 djpeg.dep + copy /y makeddsp.vc6 djpeg.dsp + copy /y maketmak.vc6 jpegtran.mak + copy /y maketdep.vc6 jpegtran.dep + copy /y maketdsp.vc6 jpegtran.dsp + copy /y makermak.vc6 rdjpgcom.mak + copy /y makerdep.vc6 rdjpgcom.dep + copy /y makerdsp.vc6 rdjpgcom.dsp + copy /y makewmak.vc6 wrjpgcom.mak + copy /y makewdep.vc6 wrjpgcom.dep + copy /y makewdsp.vc6 wrjpgcom.dsp + +setup-v16: + ren jconfig.vc jconfig.h + ren makejsln.v16 jpeg.sln + ren makeasln.v16 apps.sln + ren makejvcx.v16 jpeg.vcxproj + ren makejfil.v16 jpeg.vcxproj.filters + ren makecvcx.v16 cjpeg.vcxproj + ren makecfil.v16 cjpeg.vcxproj.filters + ren makedvcx.v16 djpeg.vcxproj + ren makedfil.v16 djpeg.vcxproj.filters + ren maketvcx.v16 jpegtran.vcxproj + ren maketfil.v16 jpegtran.vcxproj.filters + ren makervcx.v16 rdjpgcom.vcxproj + ren makerfil.v16 rdjpgcom.vcxproj.filters + ren makewvcx.v16 wrjpgcom.vcxproj + ren makewfil.v16 wrjpgcom.vcxproj.filters + +setupcopy-v16: + copy /y jconfig.vc jconfig.h + copy /y makejsln.v16 jpeg.sln + copy /y makeasln.v16 apps.sln + copy /y makejvcx.v16 jpeg.vcxproj + copy /y makejfil.v16 jpeg.vcxproj.filters + copy /y makecvcx.v16 cjpeg.vcxproj + copy /y makecfil.v16 cjpeg.vcxproj.filters + copy /y makedvcx.v16 djpeg.vcxproj + copy /y makedfil.v16 djpeg.vcxproj.filters + copy /y maketvcx.v16 jpegtran.vcxproj + copy /y maketfil.v16 jpegtran.vcxproj.filters + copy /y makervcx.v16 rdjpgcom.vcxproj + copy /y makerfil.v16 rdjpgcom.vcxproj.filters + copy /y makewvcx.v16 wrjpgcom.vcxproj + copy /y makewfil.v16 wrjpgcom.vcxproj.filters + +test: + IF EXIST testout* $(RM) testout* + .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg -dct int -gif -outfile testout.gif testorig.jpg + .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.gif testout.gif + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + +test-build: + IF EXIST .\Release\testout* $(RM) .\Release\testout* + .\Release\djpeg -dct int -ppm -outfile .\Release\testout.ppm testorig.jpg + .\Release\djpeg -dct int -gif -outfile .\Release\testout.gif testorig.jpg + .\Release\djpeg -dct int -bmp -colors 256 -outfile .\Release\testout.bmp testorig.jpg + .\Release\cjpeg -dct int -outfile .\Release\testout.jpg testimg.ppm + .\Release\djpeg -dct int -ppm -outfile .\Release\testoutp.ppm testprog.jpg + .\Release\cjpeg -dct int -progressive -opt -outfile .\Release\testoutp.jpg testimg.ppm + .\Release\jpegtran -outfile .\Release\testoutt.jpg testprog.jpg + fc /b testimg.ppm .\Release\testout.ppm + fc /b testimg.gif .\Release\testout.gif + fc /b testimg.bmp .\Release\testout.bmp + fc /b testimg.jpg .\Release\testout.jpg + fc /b testimg.ppm .\Release\testoutp.ppm + fc /b testimgp.jpg .\Release\testoutp.jpg + fc /b testorig.jpg .\Release\testoutt.jpg + +test-32: + IF EXIST .\Release\testout* $(RM) .\Release\testout* + .\Release\Win32\djpeg -dct int -ppm -outfile .\Release\testout.ppm testorig.jpg + .\Release\Win32\djpeg -dct int -gif -outfile .\Release\testout.gif testorig.jpg + .\Release\Win32\djpeg -dct int -bmp -colors 256 -outfile .\Release\testout.bmp testorig.jpg + .\Release\Win32\cjpeg -dct int -outfile .\Release\testout.jpg testimg.ppm + .\Release\Win32\djpeg -dct int -ppm -outfile .\Release\testoutp.ppm testprog.jpg + .\Release\Win32\cjpeg -dct int -progressive -opt -outfile .\Release\testoutp.jpg testimg.ppm + .\Release\Win32\jpegtran -outfile .\Release\testoutt.jpg testprog.jpg + fc /b testimg.ppm .\Release\testout.ppm + fc /b testimg.gif .\Release\testout.gif + fc /b testimg.bmp .\Release\testout.bmp + fc /b testimg.jpg .\Release\testout.jpg + fc /b testimg.ppm .\Release\testoutp.ppm + fc /b testimgp.jpg .\Release\testoutp.jpg + fc /b testorig.jpg .\Release\testoutt.jpg + +test-64: + IF EXIST .\Release\testout* $(RM) .\Release\testout* + .\Release\x64\djpeg -dct int -ppm -outfile .\Release\testout.ppm testorig.jpg + .\Release\x64\djpeg -dct int -gif -outfile .\Release\testout.gif testorig.jpg + .\Release\x64\djpeg -dct int -bmp -colors 256 -outfile .\Release\testout.bmp testorig.jpg + .\Release\x64\cjpeg -dct int -outfile .\Release\testout.jpg testimg.ppm + .\Release\x64\djpeg -dct int -ppm -outfile .\Release\testoutp.ppm testprog.jpg + .\Release\x64\cjpeg -dct int -progressive -opt -outfile .\Release\testoutp.jpg testimg.ppm + .\Release\x64\jpegtran -outfile .\Release\testoutt.jpg testprog.jpg + fc /b testimg.ppm .\Release\testout.ppm + fc /b testimg.gif .\Release\testout.gif + fc /b testimg.bmp .\Release\testout.bmp + fc /b testimg.jpg .\Release\testout.jpg + fc /b testimg.ppm .\Release\testoutp.ppm + fc /b testimgp.jpg .\Release\testoutp.jpg + fc /b testorig.jpg .\Release\testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makefile.wat b/jpeg-9d/makefile.wat new file mode 100644 index 0000000..56b2f0d --- /dev/null +++ b/jpeg-9d/makefile.wat @@ -0,0 +1,243 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using +# dos4g extender), OS/2, and Windows NT console mode. +# Thanks to Janos Haide, jhaide@btrvtech.com. + +# Read installation instructions before saying "wmake" !! + +# Uncomment line for desired system +SYSTEM=DOS +#SYSTEM=OS2 +#SYSTEM=NT + +# The name of your C compiler: +CC= wcl386 + +# You may need to adjust these cc options: +CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM) +# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!ifeq SYSTEM DOS +LDFLAGS= -zq -l=dos4g +!else ifeq SYSTEM OS2 +LDFLAGS= -zq -l=os2v2 +!else ifeq SYSTEM NT +LDFLAGS= -zq -l=nt +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. jmemnobs should work fine for dos4g or OS/2 environment. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c & + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c & + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c & + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c & + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c & + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c & + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c & + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c & + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c & + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h & + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 & + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt & + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 & + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc & + makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 & + makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 & + makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 & + makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 & + makewmak.vc6 makejsln.v16 makeasln.v16 makejvcx.v16 makejfil.v16 & + makecvcx.v16 makecfil.v16 makedvcx.v16 makedfil.v16 maketvcx.v16 & + maketfil.v16 makervcx.v16 makerfil.v16 makewvcx.v16 makewfil.v16 & + makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st & + makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat & + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas & + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp & + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in +TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.bmp testimg.jpg & + testprog.jpg testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) & + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj & + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj & + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj & + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj & + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj & + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj & + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj & + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj & + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj & + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + * wlib -n libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c + +wrjpgcom.exe: wrjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c + +.c.obj: + $(CC) $(CFLAGS) -c $< + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: .SYMBOLIC + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -gif -outfile testout.gif testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!ifeq SYSTEM DOS + fc /b testimg.ppm testout.ppm + fc /b testimg.gif testout.gif + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.gif testout.gif < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg-9d/makejdep.vc6 b/jpeg-9d/makejdep.vc6 new file mode 100644 index 0000000..d373edf --- /dev/null +++ b/jpeg-9d/makejdep.vc6 @@ -0,0 +1,423 @@ +# Microsoft Developer Studio erstellte Abhngigkeitsdatei, einbezogen von jpeg.mak + +.\jaricom.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcdctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jchuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcinit.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcomapi.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcparam.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcprepct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jctrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdatadst.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdatasrc.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdcoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdcolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jddctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdhuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdinput.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmerge.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdpostct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdtrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jerror.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\jfdctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemmgr.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemnobs.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant1.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant2.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jutils.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + diff --git a/jpeg-9d/makejdsp.vc6 b/jpeg-9d/makejdsp.vc6 new file mode 100644 index 0000000..d694b39 --- /dev/null +++ b/jpeg-9d/makejdsp.vc6 @@ -0,0 +1,285 @@ +# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Static Library" 0x0104 + +CFG=jpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak". +!MESSAGE +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\Release" +# PROP BASE Intermediate_Dir ".\Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release\jpeg" +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD BASE RSC /l 0x407 +# ADD RSC /l 0x407 +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo +# Begin Target + +# Name "jpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\jaricom.c +# End Source File +# Begin Source File + +SOURCE=.\jcapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jcapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jcarith.c +# End Source File +# Begin Source File + +SOURCE=.\jccoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jccolor.c +# End Source File +# Begin Source File + +SOURCE=.\jcdctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jchuff.c +# End Source File +# Begin Source File + +SOURCE=.\jcinit.c +# End Source File +# Begin Source File + +SOURCE=.\jcmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jcmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jcmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jcomapi.c +# End Source File +# Begin Source File + +SOURCE=.\jcparam.c +# End Source File +# Begin Source File + +SOURCE=.\jcprepct.c +# End Source File +# Begin Source File + +SOURCE=.\jcsample.c +# End Source File +# Begin Source File + +SOURCE=.\jctrans.c +# End Source File +# Begin Source File + +SOURCE=.\jdapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jdapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jdarith.c +# End Source File +# Begin Source File + +SOURCE=.\jdatadst.c +# End Source File +# Begin Source File + +SOURCE=.\jdatasrc.c +# End Source File +# Begin Source File + +SOURCE=.\jdcoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jdcolor.c +# End Source File +# Begin Source File + +SOURCE=.\jddctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jdhuff.c +# End Source File +# Begin Source File + +SOURCE=.\jdinput.c +# End Source File +# Begin Source File + +SOURCE=.\jdmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jdmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jdmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jdmerge.c +# End Source File +# Begin Source File + +SOURCE=.\jdpostct.c +# End Source File +# Begin Source File + +SOURCE=.\jdsample.c +# End Source File +# Begin Source File + +SOURCE=.\jdtrans.c +# End Source File +# Begin Source File + +SOURCE=.\jerror.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctint.c +# End Source File +# Begin Source File + +SOURCE=.\jidctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jidctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jidctint.c +# End Source File +# Begin Source File + +SOURCE=.\jmemmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jmemnobs.c +# End Source File +# Begin Source File + +SOURCE=.\jquant1.c +# End Source File +# Begin Source File + +SOURCE=.\jquant2.c +# End Source File +# Begin Source File + +SOURCE=.\jutils.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jdct.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmemsys.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/jpeg-9d/makejdsw.vc6 b/jpeg-9d/makejdsw.vc6 new file mode 100644 index 0000000..8913f62 --- /dev/null +++ b/jpeg-9d/makejdsw.vc6 @@ -0,0 +1,29 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GELSCHT WERDEN! + +############################################################################### + +Project: "jpeg"=".\jpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/jpeg-9d/makejmak.vc6 b/jpeg-9d/makejmak.vc6 new file mode 100644 index 0000000..88a4eb3 --- /dev/null +++ b/jpeg-9d/makejmak.vc6 @@ -0,0 +1,425 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpeg.dsp +!IF "$(CFG)" == "" +CFG=jpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. jpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpeg - Win32" +!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE +!ERROR Eine ungltige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +OUTDIR=.\Release +INTDIR=.\Release +# Begin Custom Macros +OutDir=.\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpeg.lib" + + +CLEAN : + -@erase "$(INTDIR)\jaricom.obj" + -@erase "$(INTDIR)\jcapimin.obj" + -@erase "$(INTDIR)\jcapistd.obj" + -@erase "$(INTDIR)\jcarith.obj" + -@erase "$(INTDIR)\jccoefct.obj" + -@erase "$(INTDIR)\jccolor.obj" + -@erase "$(INTDIR)\jcdctmgr.obj" + -@erase "$(INTDIR)\jchuff.obj" + -@erase "$(INTDIR)\jcinit.obj" + -@erase "$(INTDIR)\jcmainct.obj" + -@erase "$(INTDIR)\jcmarker.obj" + -@erase "$(INTDIR)\jcmaster.obj" + -@erase "$(INTDIR)\jcomapi.obj" + -@erase "$(INTDIR)\jcparam.obj" + -@erase "$(INTDIR)\jcprepct.obj" + -@erase "$(INTDIR)\jcsample.obj" + -@erase "$(INTDIR)\jctrans.obj" + -@erase "$(INTDIR)\jdapimin.obj" + -@erase "$(INTDIR)\jdapistd.obj" + -@erase "$(INTDIR)\jdarith.obj" + -@erase "$(INTDIR)\jdatadst.obj" + -@erase "$(INTDIR)\jdatasrc.obj" + -@erase "$(INTDIR)\jdcoefct.obj" + -@erase "$(INTDIR)\jdcolor.obj" + -@erase "$(INTDIR)\jddctmgr.obj" + -@erase "$(INTDIR)\jdhuff.obj" + -@erase "$(INTDIR)\jdinput.obj" + -@erase "$(INTDIR)\jdmainct.obj" + -@erase "$(INTDIR)\jdmarker.obj" + -@erase "$(INTDIR)\jdmaster.obj" + -@erase "$(INTDIR)\jdmerge.obj" + -@erase "$(INTDIR)\jdpostct.obj" + -@erase "$(INTDIR)\jdsample.obj" + -@erase "$(INTDIR)\jdtrans.obj" + -@erase "$(INTDIR)\jerror.obj" + -@erase "$(INTDIR)\jfdctflt.obj" + -@erase "$(INTDIR)\jfdctfst.obj" + -@erase "$(INTDIR)\jfdctint.obj" + -@erase "$(INTDIR)\jidctflt.obj" + -@erase "$(INTDIR)\jidctfst.obj" + -@erase "$(INTDIR)\jidctint.obj" + -@erase "$(INTDIR)\jmemmgr.obj" + -@erase "$(INTDIR)\jmemnobs.obj" + -@erase "$(INTDIR)\jquant1.obj" + -@erase "$(INTDIR)\jquant2.obj" + -@erase "$(INTDIR)\jutils.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpeg.lib" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +CPP=cl.exe +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /Fp"$(INTDIR)\jpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +RSC=rc.exe +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpeg.bsc" +BSC32_SBRS= \ + +LIB32=link.exe -lib +LIB32_FLAGS=/nologo /out:"$(OUTDIR)\jpeg.lib" +LIB32_OBJS= \ + "$(INTDIR)\jaricom.obj" \ + "$(INTDIR)\jcapimin.obj" \ + "$(INTDIR)\jcapistd.obj" \ + "$(INTDIR)\jcarith.obj" \ + "$(INTDIR)\jccoefct.obj" \ + "$(INTDIR)\jccolor.obj" \ + "$(INTDIR)\jcdctmgr.obj" \ + "$(INTDIR)\jchuff.obj" \ + "$(INTDIR)\jcinit.obj" \ + "$(INTDIR)\jcmainct.obj" \ + "$(INTDIR)\jcmarker.obj" \ + "$(INTDIR)\jcmaster.obj" \ + "$(INTDIR)\jcomapi.obj" \ + "$(INTDIR)\jcparam.obj" \ + "$(INTDIR)\jcprepct.obj" \ + "$(INTDIR)\jcsample.obj" \ + "$(INTDIR)\jctrans.obj" \ + "$(INTDIR)\jdapimin.obj" \ + "$(INTDIR)\jdapistd.obj" \ + "$(INTDIR)\jdarith.obj" \ + "$(INTDIR)\jdatadst.obj" \ + "$(INTDIR)\jdatasrc.obj" \ + "$(INTDIR)\jdcoefct.obj" \ + "$(INTDIR)\jdcolor.obj" \ + "$(INTDIR)\jddctmgr.obj" \ + "$(INTDIR)\jdhuff.obj" \ + "$(INTDIR)\jdinput.obj" \ + "$(INTDIR)\jdmainct.obj" \ + "$(INTDIR)\jdmarker.obj" \ + "$(INTDIR)\jdmaster.obj" \ + "$(INTDIR)\jdmerge.obj" \ + "$(INTDIR)\jdpostct.obj" \ + "$(INTDIR)\jdsample.obj" \ + "$(INTDIR)\jdtrans.obj" \ + "$(INTDIR)\jerror.obj" \ + "$(INTDIR)\jfdctflt.obj" \ + "$(INTDIR)\jfdctfst.obj" \ + "$(INTDIR)\jfdctint.obj" \ + "$(INTDIR)\jidctflt.obj" \ + "$(INTDIR)\jidctfst.obj" \ + "$(INTDIR)\jidctint.obj" \ + "$(INTDIR)\jmemmgr.obj" \ + "$(INTDIR)\jmemnobs.obj" \ + "$(INTDIR)\jquant1.obj" \ + "$(INTDIR)\jquant2.obj" \ + "$(INTDIR)\jutils.obj" + +"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS) + $(LIB32) @<< + $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS) +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpeg.dep") +!INCLUDE "jpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "jpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpeg - Win32" +SOURCE=.\jaricom.c + +"$(INTDIR)\jaricom.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapimin.c + +"$(INTDIR)\jcapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapistd.c + +"$(INTDIR)\jcapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcarith.c + +"$(INTDIR)\jcarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccoefct.c + +"$(INTDIR)\jccoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccolor.c + +"$(INTDIR)\jccolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcdctmgr.c + +"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jchuff.c + +"$(INTDIR)\jchuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcinit.c + +"$(INTDIR)\jcinit.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmainct.c + +"$(INTDIR)\jcmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmarker.c + +"$(INTDIR)\jcmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmaster.c + +"$(INTDIR)\jcmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcomapi.c + +"$(INTDIR)\jcomapi.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcparam.c + +"$(INTDIR)\jcparam.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcprepct.c + +"$(INTDIR)\jcprepct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcsample.c + +"$(INTDIR)\jcsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jctrans.c + +"$(INTDIR)\jctrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapimin.c + +"$(INTDIR)\jdapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapistd.c + +"$(INTDIR)\jdapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdarith.c + +"$(INTDIR)\jdarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatadst.c + +"$(INTDIR)\jdatadst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatasrc.c + +"$(INTDIR)\jdatasrc.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcoefct.c + +"$(INTDIR)\jdcoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcolor.c + +"$(INTDIR)\jdcolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jddctmgr.c + +"$(INTDIR)\jddctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdhuff.c + +"$(INTDIR)\jdhuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdinput.c + +"$(INTDIR)\jdinput.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmainct.c + +"$(INTDIR)\jdmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmarker.c + +"$(INTDIR)\jdmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmaster.c + +"$(INTDIR)\jdmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmerge.c + +"$(INTDIR)\jdmerge.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdpostct.c + +"$(INTDIR)\jdpostct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdsample.c + +"$(INTDIR)\jdsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdtrans.c + +"$(INTDIR)\jdtrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jerror.c + +"$(INTDIR)\jerror.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctflt.c + +"$(INTDIR)\jfdctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctfst.c + +"$(INTDIR)\jfdctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctint.c + +"$(INTDIR)\jfdctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctflt.c + +"$(INTDIR)\jidctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctfst.c + +"$(INTDIR)\jidctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctint.c + +"$(INTDIR)\jidctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemmgr.c + +"$(INTDIR)\jmemmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemnobs.c + +"$(INTDIR)\jmemnobs.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant1.c + +"$(INTDIR)\jquant1.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant2.c + +"$(INTDIR)\jquant2.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jutils.c + +"$(INTDIR)\jutils.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/jpeg-9d/makeproj.mac b/jpeg-9d/makeproj.mac new file mode 100644 index 0000000..e5b5102 --- /dev/null +++ b/jpeg-9d/makeproj.mac @@ -0,0 +1,213 @@ +-- +-- makeproj.mac +-- +-- This AppleScript builds Code Warrior PRO Release 2 project files for the +-- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'. +-- (We'd distribute real project files, except they're not text +-- and would create maintenance headaches.) +-- +-- The script then compiles and links the library and the test programs. +-- NOTE: if you haven't already created a 'jconfig.h' file, the script +-- automatically copies 'jconfig.mac' to 'jconfig.h'. +-- +-- To use this script, you must have AppleScript 1.1 or later installed +-- and a suitable AppleScript editor like Script Editor or Script Debugger +-- (http://www.latenightsw.com). Open this file with your AppleScript +-- editor and execute the "run" command to build the projects. +-- +-- Thanks to Dan Sears and Don Agro for this script. +-- Questions about this script can be addressed to dogpark@interlog.com +-- + +on run + + choose folder with prompt ">>> Select IJG source folder <<<" + set ijg_folder to result + + choose folder with prompt ">>> Select MetroWerks folder <<<" + set cw_folder to result + + -- if jconfig.h doesn't already exist, copy jconfig.mac + + tell application "Finder" + if not (exists file "jconfig.h" of ijg_folder) then + duplicate {file "jconfig.mac" of folder ijg_folder} + select file "jconfig.mac copy" of folder ijg_folder + set name of selection to "jconfig.h" + end if + end tell + + tell application "CodeWarrior IDE 2.1" + with timeout of 10000 seconds + + -- create libjpeg project + + activate + Create Project (ijg_folder as string) & "libjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"libjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "PPC Project" to {Project Type:library} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jaricom.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jcarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jctrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jcparam.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1 + Add Files (ijg_folder as string) & "jcinit.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jcsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jchuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jdarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jdinput.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1 + Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant1.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant2.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1 + Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1 + Add Files (ijg_folder as string) & "jutils.c" To Segment 1 + Add Files (ijg_folder as string) & "jerror.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1 + + -- compile and link the library + + Make Project + Close Project + + -- create cjpeg project + + activate + Create Project (ijg_folder as string) & "cjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"cjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "rdppm.c" To Segment 1 + Add Files (ijg_folder as string) & "rdgif.c" To Segment 1 + Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "rdrle.c" To Segment 1 + Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link cjpeg + + Make Project + Close Project + + -- create djpeg project + + activate + Create Project (ijg_folder as string) & "djpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"djpeg"} + Set Preferences of panel "PPC Project" to {File Name:"djpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "djpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "wrppm.c" To Segment 1 + Add Files (ijg_folder as string) & "wrgif.c" To Segment 1 + Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "wrrle.c" To Segment 1 + Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link djpeg + + Make Project + Close Project + + -- create jpegtran project + + activate + Create Project (ijg_folder as string) & "jpegtran.proj" + Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"} + Set Preferences of panel "PPC Project" to {File Name:"jpegtran"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "transupp.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link jpegtran + + Make Project + Close Project + + quit + + end timeout + end tell +end run diff --git a/jpeg-9d/makerdep.vc6 b/jpeg-9d/makerdep.vc6 new file mode 100644 index 0000000..d2dac9d --- /dev/null +++ b/jpeg-9d/makerdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abhngigkeitsdatei, einbezogen von rdjpgcom.mak + +.\rdjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/jpeg-9d/makerdsp.vc6 b/jpeg-9d/makerdsp.vc6 new file mode 100644 index 0000000..f08282f --- /dev/null +++ b/jpeg-9d/makerdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="rdjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=rdjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak". +!MESSAGE +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\rdjpgcom\Release" +# PROP BASE Intermediate_Dir ".\rdjpgcom\Release" +# PROP BASE Target_Dir ".\rdjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release\rdjpgcom" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\rdjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "rdjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\rdjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/jpeg-9d/makermak.vc6 b/jpeg-9d/makermak.vc6 new file mode 100644 index 0000000..b54ea7d --- /dev/null +++ b/jpeg-9d/makermak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on rdjpgcom.dsp +!IF "$(CFG)" == "" +CFG=rdjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. rdjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "rdjpgcom - Win32" +!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungltige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\rdjpgcom\Release +INTDIR=.\rdjpgcom\Release +# Begin Custom Macros +OutDir=.\rdjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\rdjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\rdjpgcom.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\rdjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\rdjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\rdjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\rdjpgcom.obj" + +"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\rdjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("rdjpgcom.dep") +!INCLUDE "rdjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "rdjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "rdjpgcom - Win32" +SOURCE=.\rdjpgcom.c + +"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/jpeg-9d/maketdep.vc6 b/jpeg-9d/maketdep.vc6 new file mode 100644 index 0000000..acebae9 --- /dev/null +++ b/jpeg-9d/maketdep.vc6 @@ -0,0 +1,43 @@ +# Microsoft Developer Studio erstellte Abhngigkeitsdatei, einbezogen von jpegtran.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jpegtran.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + ".\transupp.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\transupp.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + ".\transupp.h"\ + diff --git a/jpeg-9d/maketdsp.vc6 b/jpeg-9d/maketdsp.vc6 new file mode 100644 index 0000000..76b1616 --- /dev/null +++ b/jpeg-9d/maketdsp.vc6 @@ -0,0 +1,122 @@ +# Microsoft Developer Studio Project File - Name="jpegtran" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=jpegtran - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak". +!MESSAGE +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\jpegtran\Release" +# PROP BASE Intermediate_Dir ".\jpegtran\Release" +# PROP BASE Target_Dir ".\jpegtran" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release\jpegtran" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\jpegtran" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "jpegtran - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\jpegtran.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\transupp.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# Begin Source File + +SOURCE=.\transupp.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/jpeg-9d/maketmak.vc6 b/jpeg-9d/maketmak.vc6 new file mode 100644 index 0000000..4ef27fd --- /dev/null +++ b/jpeg-9d/maketmak.vc6 @@ -0,0 +1,131 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpegtran.dsp +!IF "$(CFG)" == "" +CFG=jpegtran - Win32 +!MESSAGE Keine Konfiguration angegeben. jpegtran - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpegtran - Win32" +!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungltige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\jpegtran\Release +INTDIR=.\jpegtran\Release +# Begin Custom Macros +OutDir=.\jpegtran\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpegtran.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\jpegtran.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\transupp.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpegtran.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpegtran.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)\jpegtran.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\jpegtran.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\transupp.obj" + +"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\jpegtran.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpegtran.dep") +!INCLUDE "jpegtran.dep" +!ELSE +!MESSAGE Warning: cannot find "jpegtran.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpegtran - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jpegtran.c + +"$(INTDIR)\jpegtran.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\transupp.c + +"$(INTDIR)\transupp.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/jpeg-9d/makewdep.vc6 b/jpeg-9d/makewdep.vc6 new file mode 100644 index 0000000..358146f --- /dev/null +++ b/jpeg-9d/makewdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abhngigkeitsdatei, einbezogen von wrjpgcom.mak + +.\wrjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/jpeg-9d/makewdsp.vc6 b/jpeg-9d/makewdsp.vc6 new file mode 100644 index 0000000..51905a8 --- /dev/null +++ b/jpeg-9d/makewdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="wrjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=wrjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak". +!MESSAGE +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\wrjpgcom\Release" +# PROP BASE Intermediate_Dir ".\wrjpgcom\Release" +# PROP BASE Target_Dir ".\wrjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release\wrjpgcom" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\wrjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "wrjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\wrjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/jpeg-9d/makewmak.vc6 b/jpeg-9d/makewmak.vc6 new file mode 100644 index 0000000..27c73f3 --- /dev/null +++ b/jpeg-9d/makewmak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on wrjpgcom.dsp +!IF "$(CFG)" == "" +CFG=wrjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. wrjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "wrjpgcom - Win32" +!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungltige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\wrjpgcom\Release +INTDIR=.\wrjpgcom\Release +# Begin Custom Macros +OutDir=.\wrjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\wrjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrjpgcom.obj" + -@erase "$(OUTDIR)\wrjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\wrjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\wrjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\wrjpgcom.obj" + +"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\wrjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("wrjpgcom.dep") +!INCLUDE "wrjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "wrjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "wrjpgcom - Win32" +SOURCE=.\wrjpgcom.c + +"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/jpeg-9d/makljpeg.st b/jpeg-9d/makljpeg.st new file mode 100644 index 0000000..cc1ba01 --- /dev/null +++ b/jpeg-9d/makljpeg.st @@ -0,0 +1,68 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to libjpeg.prj. +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +libjpeg.lib +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost +.L[-J] ; link new Obj-format (so we get a library) += +; * * * * List of modules * * * * +jaricom.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h) +jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) +jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) diff --git a/jpeg-9d/maktjpeg.st b/jpeg-9d/maktjpeg.st new file mode 100644 index 0000000..43f078a --- /dev/null +++ b/jpeg-9d/maktjpeg.st @@ -0,0 +1,30 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to jpegtran.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +jpegtran.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h) +libjpeg.lib ; built by libjpeg.prj +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/jpeg-9d/makvms.opt b/jpeg-9d/makvms.opt new file mode 100644 index 0000000..675e8fe --- /dev/null +++ b/jpeg-9d/makvms.opt @@ -0,0 +1,4 @@ +! A pointer to the VAX/VMS C Run-Time Shareable Library. +! This file is needed by makefile.mms and makefile.vms, +! but only for the older VAX C compiler. DEC C does not need it. +Sys$Library:VAXCRTL.EXE /Share diff --git a/jpeg-9d/missing b/jpeg-9d/missing new file mode 100644 index 0000000..625aeb1 --- /dev/null +++ b/jpeg-9d/missing @@ -0,0 +1,215 @@ +#! /bin/sh +# Common wrapper for a few potentially missing GNU programs. + +scriptversion=2018-03-07.03; # UTC + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try '$0 --help' for more information" + exit 1 +fi + +case $1 in + + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; + + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" + exit 1 + ;; + +esac + +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi + +perl_URL=https://www.perl.org/ +flex_URL=https://github.com/westes/flex +gnu_software_URL=https://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff --git a/jpeg-9d/rdbmp.c b/jpeg-9d/rdbmp.c new file mode 100644 index 0000000..6749ea0 --- /dev/null +++ b/jpeg-9d/rdbmp.c @@ -0,0 +1,469 @@ +/* + * rdbmp.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Microsoft "BMP" + * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors). + * Currently, only 8-, 24-, and 32-bit images are supported, not 1-bit or + * 4-bit (feeding such low-depth images into JPEG would be silly anyway). + * Also, we don't support RLE-compressed files. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed BMP format). + * + * This code contributed by James Arthur Boucher. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef BMP_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +typedef char U_CHAR; +#ifdef CHAR_IS_UNSIGNED +#define UCH(x) ((int) (x)) +#else +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* Private version of data source object */ + +typedef struct _bmp_source_struct * bmp_source_ptr; + +typedef struct _bmp_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + j_compress_ptr cinfo; /* back link saves passing separate parm */ + + JSAMPARRAY colormap; /* BMP colormap (converted to my format) */ + + jvirt_sarray_ptr whole_image; /* Needed to reverse row order */ + JDIMENSION source_row; /* Current source row number */ + JDIMENSION row_width; /* Physical width of scanlines in file */ + + int bits_per_pixel; /* remembers 8-, 24-, or 32-bit format */ + int cmap_length; /* colormap length */ +} bmp_source_struct; + + +LOCAL(int) +read_byte (bmp_source_ptr sinfo) +/* Read next byte from BMP file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(void) +read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize) +/* Read the colormap from a BMP file */ +{ + int i; + + switch (mapentrysize) { + case 3: + /* BGR format (occurs in OS/2 files) */ + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + } + break; + case 4: + /* BGR0 format (occurs in MS Windows files) */ + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + (void) read_byte(sinfo); + } + break; + default: + ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP); + } +} + + +/* + * Read one row of pixels. + * The image has been read into the whole_image array, but is otherwise + * unprocessed. We must read it out in top-to-bottom row order, and if + * it is an 8-bit image, we must expand colormapped pixels to 24bit format. + */ + +METHODDEF(JDIMENSION) +get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit colormap indexes */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register JSAMPROW inptr, outptr; + register JSAMPARRAY colormap; + register JDIMENSION col; + register int t; + int cmaplen; + + /* Fetch next row from virtual array */ + source->source_row--; + inptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->whole_image, source->source_row, (JDIMENSION) 1, FALSE); + + /* Expand the colormap indexes to real data */ + outptr = source->pub.buffer[0]; + colormap = source->colormap; + cmaplen = source->cmap_length; + for (col = cinfo->image_width; col > 0; col--) { + t = GETJSAMPLE(*inptr++); + if (t >= cmaplen) + ERREXIT(cinfo, JERR_BMP_OUTOFRANGE); + *outptr++ = colormap[0][t]; /* can omit GETJSAMPLE() safely */ + *outptr++ = colormap[1][t]; + *outptr++ = colormap[2][t]; + } + + return 1; +} + +METHODDEF(JDIMENSION) +get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 24-bit pixels */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + inptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->whole_image, source->source_row, (JDIMENSION) 1, FALSE); + + /* Transfer data. Note source values are in BGR order + * (even though Microsoft's own documents say the opposite). + */ + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + outptr += 3; + } + + return 1; +} + +METHODDEF(JDIMENSION) +get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 32-bit pixels */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + inptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->whole_image, source->source_row, (JDIMENSION) 1, FALSE); + + /* Transfer data. Note source values are in BGR order + * (even though Microsoft's own documents say the opposite). + */ + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + inptr++; /* skip the 4th byte (Alpha channel) */ + outptr += 3; + } + + return 1; +} + + +/* + * This method loads the image into whole_image during the first call on + * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call + * get_8bit_row, get_24bit_row, or get_32bit_row on subsequent calls. + */ + +METHODDEF(JDIMENSION) +preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register FILE *infile = source->pub.input_file; + register int c; + register JSAMPROW out_ptr; + JDIMENSION row, col; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the data into a virtual array in input-file row order. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + out_ptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->whole_image, row, (JDIMENSION) 1, TRUE); + for (col = source->row_width; col > 0; col--) { + /* inline copy of read_byte() for speed */ + if ((c = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_INPUT_EOF); + *out_ptr++ = (JSAMPLE) c; + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Set up to read from the virtual array in top-to-bottom order */ + switch (source->bits_per_pixel) { + case 8: + source->pub.get_pixel_rows = get_8bit_row; + break; + case 24: + source->pub.get_pixel_rows = get_24bit_row; + break; + case 32: + source->pub.get_pixel_rows = get_32bit_row; + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + } + source->source_row = cinfo->image_height; + + /* And read the first row */ + return (*source->pub.get_pixel_rows) (cinfo, sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + U_CHAR bmpfileheader[14]; + U_CHAR bmpinfoheader[64]; +#define GET_2B(array, offset) ((unsigned int) UCH(array[offset]) + \ + (((unsigned int) UCH(array[offset+1])) << 8)) +#define GET_4B(array, offset) ((INT32) UCH(array[offset]) + \ + (((INT32) UCH(array[offset+1])) << 8) + \ + (((INT32) UCH(array[offset+2])) << 16) + \ + (((INT32) UCH(array[offset+3])) << 24)) + INT32 bfOffBits; + INT32 headerSize; + INT32 biWidth; + INT32 biHeight; + unsigned int biPlanes; + INT32 biCompression; + INT32 biXPelsPerMeter,biYPelsPerMeter; + INT32 biClrUsed = 0; + int mapentrysize = 0; /* 0 indicates no colormap */ + INT32 bPad; + JDIMENSION row_width; + + /* Read and verify the bitmap file header */ + if (! ReadOK(source->pub.input_file, bmpfileheader, 14)) + ERREXIT(cinfo, JERR_INPUT_EOF); + if (GET_2B(bmpfileheader, 0) != 0x4D42) /* 'BM' */ + ERREXIT(cinfo, JERR_BMP_NOT); + bfOffBits = GET_4B(bmpfileheader, 10); + /* We ignore the remaining fileheader fields */ + + /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows), + * or 64 bytes (OS/2 2.x). Check the first 4 bytes to find out which. + */ + if (! ReadOK(source->pub.input_file, bmpinfoheader, 4)) + ERREXIT(cinfo, JERR_INPUT_EOF); + headerSize = GET_4B(bmpinfoheader, 0); + if (headerSize < 12 || headerSize > 64) + ERREXIT(cinfo, JERR_BMP_BADHEADER); + if (! ReadOK(source->pub.input_file, bmpinfoheader + 4, headerSize - 4)) + ERREXIT(cinfo, JERR_INPUT_EOF); + + switch ((int) headerSize) { + case 12: + /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */ + biWidth = (INT32) GET_2B(bmpinfoheader, 4); + biHeight = (INT32) GET_2B(bmpinfoheader, 6); + biPlanes = GET_2B(bmpinfoheader, 8); + source->bits_per_pixel = (int) GET_2B(bmpinfoheader, 10); + + switch (source->bits_per_pixel) { + case 8: /* colormapped image */ + mapentrysize = 3; /* OS/2 uses RGBTRIPLE colormap */ + TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight); + break; + case 24: /* RGB image */ + case 32: /* RGB image + Alpha channel */ + TRACEMS3(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight, + source->bits_per_pixel); + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + } + break; + case 40: + case 64: + /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */ + /* or OS/2 2.x header, which has additional fields that we ignore */ + biWidth = GET_4B(bmpinfoheader, 4); + biHeight = GET_4B(bmpinfoheader, 8); + biPlanes = GET_2B(bmpinfoheader, 12); + source->bits_per_pixel = (int) GET_2B(bmpinfoheader, 14); + biCompression = GET_4B(bmpinfoheader, 16); + biXPelsPerMeter = GET_4B(bmpinfoheader, 24); + biYPelsPerMeter = GET_4B(bmpinfoheader, 28); + biClrUsed = GET_4B(bmpinfoheader, 32); + /* biSizeImage, biClrImportant fields are ignored */ + + switch (source->bits_per_pixel) { + case 8: /* colormapped image */ + mapentrysize = 4; /* Windows uses RGBQUAD colormap */ + TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight); + break; + case 24: /* RGB image */ + case 32: /* RGB image + Alpha channel */ + TRACEMS3(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight, + source->bits_per_pixel); + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + } + if (biCompression != 0) + ERREXIT(cinfo, JERR_BMP_COMPRESSED); + + if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) { + /* Set JFIF density parameters from the BMP data */ + cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */ + cinfo->Y_density = (UINT16) (biYPelsPerMeter/100); + cinfo->density_unit = 2; /* dots/cm */ + } + break; + default: + ERREXIT(cinfo, JERR_BMP_BADHEADER); + return; /* avoid compiler warnings for uninitialized variables */ + } + + if (biPlanes != 1) + ERREXIT(cinfo, JERR_BMP_BADPLANES); + /* Sanity check for buffer allocation below */ + if (biWidth <= 0 || biHeight <= 0 || (biWidth >> 24) || (biHeight >> 24)) + ERREXIT(cinfo, JERR_BMP_OUTOFRANGE); + + /* Compute distance to bitmap data --- will adjust for colormap below */ + bPad = bfOffBits - (headerSize + 14); + + /* Read the colormap, if any */ + if (mapentrysize > 0) { + if (biClrUsed <= 0) + biClrUsed = 256; /* assume it's 256 */ + else if (biClrUsed > 256) + ERREXIT(cinfo, JERR_BMP_BADCMAP); + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) biClrUsed, (JDIMENSION) 3); + source->cmap_length = (int) biClrUsed; + /* and read it from the file */ + read_colormap(source, (int) biClrUsed, mapentrysize); + /* account for size of colormap */ + bPad -= biClrUsed * mapentrysize; + } + + /* Skip any remaining pad bytes */ + if (bPad < 0) /* incorrect bfOffBits value? */ + ERREXIT(cinfo, JERR_BMP_BADHEADER); + while (--bPad >= 0) { + (void) read_byte(source); + } + + /* Compute row width in file, including padding to 4-byte boundary */ + if (source->bits_per_pixel == 24) + row_width = (JDIMENSION) (biWidth * 3); + else if (source->bits_per_pixel == 32) + row_width = (JDIMENSION) (biWidth * 4); + else + row_width = (JDIMENSION) biWidth; + while ((row_width & 3) != 0) row_width++; + source->row_width = row_width; + + /* Allocate space for inversion array, prepare for preload pass */ + source->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + row_width, (JDIMENSION) biHeight, (JDIMENSION) 1); + source->pub.get_pixel_rows = preload_image; + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + + /* Allocate one-row buffer for returned data */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) (biWidth * 3), (JDIMENSION) 1); + source->pub.buffer_height = 1; + + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = 3; + cinfo->data_precision = 8; + cinfo->image_width = (JDIMENSION) biWidth; + cinfo->image_height = (JDIMENSION) biHeight; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for BMP format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_bmp (j_compress_ptr cinfo) +{ + bmp_source_ptr source; + + /* Create module interface object */ + source = (bmp_source_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(bmp_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_bmp; + source->pub.finish_input = finish_input_bmp; + + return &source->pub; +} + +#endif /* BMP_SUPPORTED */ diff --git a/jpeg-9d/rdcolmap.c b/jpeg-9d/rdcolmap.c new file mode 100644 index 0000000..42b3437 --- /dev/null +++ b/jpeg-9d/rdcolmap.c @@ -0,0 +1,253 @@ +/* + * rdcolmap.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file implements djpeg's "-map file" switch. It reads a source image + * and constructs a colormap to be supplied to the JPEG decompressor. + * + * Currently, these file formats are supported for the map file: + * GIF: the contents of the GIF's global colormap are used. + * PPM (either text or raw flavor): the entire file is read and + * each unique pixel value is entered in the map. + * Note that reading a large PPM file will be horrendously slow. + * Typically, a PPM-format map file should contain just one pixel + * of each desired color. Such a file can be extracted from an + * ordinary image PPM file with ppmtomap(1). + * + * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not + * currently implemented. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ + +/* Portions of this code are based on the PBMPLUS library, which is: +** +** Copyright (C) 1988 by Jef Poskanzer. +** +** Permission to use, copy, modify, and distribute this software and its +** documentation for any purpose and without fee is hereby granted, provided +** that the above copyright notice appear in all copies and that both that +** copyright notice and this permission notice appear in supporting +** documentation. This software is provided "as is" without express or +** implied warranty. +*/ + + +/* + * Add a (potentially) new color to the color map. + */ + +LOCAL(void) +add_map_entry (j_decompress_ptr cinfo, int R, int G, int B) +{ + JSAMPROW colormap0 = cinfo->colormap[0]; + JSAMPROW colormap1 = cinfo->colormap[1]; + JSAMPROW colormap2 = cinfo->colormap[2]; + int ncolors = cinfo->actual_number_of_colors; + int index; + + /* Check for duplicate color. */ + for (index = 0; index < ncolors; index++) { + if (GETJSAMPLE(colormap0[index]) == R && + GETJSAMPLE(colormap1[index]) == G && + GETJSAMPLE(colormap2[index]) == B) + return; /* color is already in map */ + } + + /* Check for map overflow. */ + if (ncolors >= (MAXJSAMPLE+1)) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1)); + + /* OK, add color to map. */ + colormap0[ncolors] = (JSAMPLE) R; + colormap1[ncolors] = (JSAMPLE) G; + colormap2[ncolors] = (JSAMPLE) B; + cinfo->actual_number_of_colors++; +} + + +/* + * Extract color map from a GIF file. + */ + +LOCAL(void) +read_gif_map (j_decompress_ptr cinfo, FILE * infile) +{ + int header[13]; + int i, colormaplen; + int R, G, B; + + /* Initial 'G' has already been read by read_color_map */ + /* Read the rest of the GIF header and logical screen descriptor */ + for (i = 1; i < 13; i++) { + if ((header[i] = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + } + + /* Verify GIF Header */ + if (header[1] != 'I' || header[2] != 'F') + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* There must be a global color map. */ + if ((header[10] & 0x80) == 0) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* OK, fetch it. */ + colormaplen = 2 << (header[10] & 0x07); + + for (i = 0; i < colormaplen; i++) { + R = getc(infile); + G = getc(infile); + B = getc(infile); + if (R == EOF || G == EOF || B == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + add_map_entry(cinfo, + R << (BITS_IN_JSAMPLE-8), + G << (BITS_IN_JSAMPLE-8), + B << (BITS_IN_JSAMPLE-8)); + } +} + + +/* Support routines for reading PPM */ + + +LOCAL(int) +pbm_getc (FILE * infile) +/* Read next char, skipping over any comments */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(infile); + if (ch == '#') { + do { + ch = getc(infile); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(unsigned int) +read_pbm_integer (j_decompress_ptr cinfo, FILE * infile) +/* Read an unsigned decimal integer from the PPM file */ +/* Swallows one trailing character after the integer */ +/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ +/* This should not be a problem in practice. */ +{ + register int ch; + register unsigned int val; + + /* Skip any leading whitespace */ + do { + ch = pbm_getc(infile); + if (ch == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); + + if (ch < '0' || ch > '9') + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + val = ch - '0'; + while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { + val *= 10; + val += ch - '0'; + } + return val; +} + + +/* + * Extract color map from a PPM file. + */ + +LOCAL(void) +read_ppm_map (j_decompress_ptr cinfo, FILE * infile) +{ + int c; + unsigned int w, h, maxval, row, col; + int R, G, B; + + /* Initial 'P' has already been read by read_color_map */ + c = getc(infile); /* save format discriminator for a sec */ + + /* while we fetch the remaining header info */ + w = read_pbm_integer(cinfo, infile); + h = read_pbm_integer(cinfo, infile); + maxval = read_pbm_integer(cinfo, infile); + + if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* For now, we don't support rescaling from an unusual maxval. */ + if (maxval != (unsigned int) MAXJSAMPLE) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + switch (c) { + case '3': /* it's a text-format PPM file */ + for (row = 0; row < h; row++) { + for (col = 0; col < w; col++) { + R = read_pbm_integer(cinfo, infile); + G = read_pbm_integer(cinfo, infile); + B = read_pbm_integer(cinfo, infile); + add_map_entry(cinfo, R, G, B); + } + } + break; + + case '6': /* it's a raw-format PPM file */ + for (row = 0; row < h; row++) { + for (col = 0; col < w; col++) { + R = getc(infile); + G = getc(infile); + B = getc(infile); + if (R == EOF || G == EOF || B == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + add_map_entry(cinfo, R, G, B); + } + } + break; + + default: + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + break; + } +} + + +/* + * Main entry point from djpeg.c. + * Input: opened input file (from file name argument on command line). + * Output: colormap and actual_number_of_colors fields are set in cinfo. + */ + +GLOBAL(void) +read_color_map (j_decompress_ptr cinfo, FILE * infile) +{ + /* Allocate space for a color map of maximum supported size. */ + cinfo->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3); + cinfo->actual_number_of_colors = 0; /* initialize map to empty */ + + /* Read first byte to determine file format */ + switch (getc(infile)) { + case 'G': + read_gif_map(cinfo, infile); + break; + case 'P': + read_ppm_map(cinfo, infile); + break; + default: + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + break; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/jpeg-9d/rdgif.c b/jpeg-9d/rdgif.c new file mode 100644 index 0000000..08803ae --- /dev/null +++ b/jpeg-9d/rdgif.c @@ -0,0 +1,677 @@ +/* + * rdgif.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in GIF format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed GIF format). + */ + +/* + * This code is loosely based on giftoppm from the PBMPLUS distribution + * of Feb. 1991. That file contains the following copyright notice: + * +-------------------------------------------------------------------+ + * | Copyright 1990, David Koblas. | + * | Permission to use, copy, modify, and distribute this software | + * | and its documentation for any purpose and without fee is hereby | + * | granted, provided that the above copyright notice appear in all | + * | copies and that both that copyright notice and this permission | + * | notice appear in supporting documentation. This software is | + * | provided "as is" without express or implied warranty. | + * +-------------------------------------------------------------------+ + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef GIF_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +typedef char U_CHAR; +#ifdef CHAR_IS_UNSIGNED +#define UCH(x) ((int) (x)) +#else +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +#define MAXCOLORMAPSIZE 256 /* max # of colors in a GIF colormap */ +#define NUMCOLORS 3 /* # of colors */ +#define CM_RED 0 /* color component numbers */ +#define CM_GREEN 1 +#define CM_BLUE 2 + +#define MAX_LZW_BITS 12 /* maximum LZW code size */ +#define LZW_TABLE_SIZE (1< table of prefix symbols */ + UINT8 FAR *symbol_tail; /* => table of suffix bytes */ + UINT8 FAR *symbol_stack; /* => stack for symbol expansions */ + UINT8 FAR *sp; /* stack pointer */ + + /* State for interlaced image processing */ + boolean is_interlaced; /* TRUE if have interlaced image */ + jvirt_sarray_ptr interlaced_image; /* full image in interlaced order */ + JDIMENSION cur_row_number; /* need to know actual row number */ + JDIMENSION pass2_offset; /* # of pixel rows in pass 1 */ + JDIMENSION pass3_offset; /* # of pixel rows in passes 1&2 */ + JDIMENSION pass4_offset; /* # of pixel rows in passes 1,2,3 */ +} gif_source_struct; + +typedef gif_source_struct * gif_source_ptr; + + +/* Forward declarations */ +METHODDEF(JDIMENSION) get_pixel_rows + JPP((j_compress_ptr cinfo, cjpeg_source_ptr sinfo)); +METHODDEF(JDIMENSION) load_interlaced_image + JPP((j_compress_ptr cinfo, cjpeg_source_ptr sinfo)); +METHODDEF(JDIMENSION) get_interlaced_row + JPP((j_compress_ptr cinfo, cjpeg_source_ptr sinfo)); + + +LOCAL(int) +ReadByte (gif_source_ptr sinfo) +/* Read next byte from GIF file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(int) +GetDataBlock (gif_source_ptr sinfo, U_CHAR *buf) +/* Read a GIF data block, which has a leading count byte */ +/* A zero-length block marks the end of a data block sequence */ +{ + int count; + + count = ReadByte(sinfo); + if (count > 0) { + if (! ReadOK(sinfo->pub.input_file, buf, count)) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + } + return count; +} + + +LOCAL(void) +SkipDataBlocks (gif_source_ptr sinfo) +/* Skip a series of data blocks, until a block terminator is found */ +{ + U_CHAR buf[256]; + + while (GetDataBlock(sinfo, buf) > 0) + /* skip */; +} + + +LOCAL(void) +ReInitLZW (gif_source_ptr sinfo) +/* (Re)initialize LZW state; shared code for startup and Clear processing */ +{ + sinfo->code_size = sinfo->input_code_size + 1; + sinfo->limit_code = sinfo->clear_code << 1; /* 2^code_size */ + sinfo->max_code = sinfo->clear_code + 2; /* first unused code value */ + sinfo->sp = sinfo->symbol_stack; /* init stack to empty */ +} + + +LOCAL(void) +InitLZWCode (gif_source_ptr sinfo) +/* Initialize for a series of LZWReadByte (and hence GetCode) calls */ +{ + /* GetCode initialization */ + sinfo->last_byte = 2; /* make safe to "recopy last two bytes" */ + sinfo->code_buf[0] = 0; + sinfo->code_buf[1] = 0; + sinfo->last_bit = 0; /* nothing in the buffer */ + sinfo->cur_bit = 0; /* force buffer load on first call */ + sinfo->first_time = TRUE; + sinfo->out_of_blocks = FALSE; + + /* LZWReadByte initialization: */ + /* compute special code values (note that these do not change later) */ + sinfo->clear_code = 1 << sinfo->input_code_size; + sinfo->end_code = sinfo->clear_code + 1; + ReInitLZW(sinfo); +} + + +LOCAL(int) +GetCode (gif_source_ptr sinfo) +/* Fetch the next code_size bits from the GIF data */ +/* We assume code_size is less than 16 */ +{ + register INT32 accum; + int offs, count; + + while (sinfo->cur_bit + sinfo->code_size > sinfo->last_bit) { + /* Time to reload the buffer */ + /* First time, share code with Clear case */ + if (sinfo->first_time) { + sinfo->first_time = FALSE; + return sinfo->clear_code; + } + if (sinfo->out_of_blocks) { + WARNMS(sinfo->cinfo, JWRN_GIF_NOMOREDATA); + return sinfo->end_code; /* fake something useful */ + } + /* preserve last two bytes of what we have -- assume code_size <= 16 */ + sinfo->code_buf[0] = sinfo->code_buf[sinfo->last_byte-2]; + sinfo->code_buf[1] = sinfo->code_buf[sinfo->last_byte-1]; + /* Load more bytes; set flag if we reach the terminator block */ + if ((count = GetDataBlock(sinfo, &sinfo->code_buf[2])) == 0) { + sinfo->out_of_blocks = TRUE; + WARNMS(sinfo->cinfo, JWRN_GIF_NOMOREDATA); + return sinfo->end_code; /* fake something useful */ + } + /* Reset counters */ + sinfo->cur_bit = (sinfo->cur_bit - sinfo->last_bit) + 16; + sinfo->last_byte = 2 + count; + sinfo->last_bit = sinfo->last_byte * 8; + } + + /* Form up next 24 bits in accum */ + offs = sinfo->cur_bit >> 3; /* byte containing cur_bit */ + accum = (INT32) UCH(sinfo->code_buf[offs+2]); + accum <<= 8; + accum |= (INT32) UCH(sinfo->code_buf[offs+1]); + accum <<= 8; + accum |= (INT32) UCH(sinfo->code_buf[offs]); + + /* Right-align cur_bit in accum, then mask off desired number of bits */ + accum >>= (sinfo->cur_bit & 7); + sinfo->cur_bit += sinfo->code_size; + return ((int) accum) & ((1 << sinfo->code_size) - 1); +} + + +LOCAL(int) +LZWReadByte (gif_source_ptr sinfo) +/* Read an LZW-compressed byte */ +{ + register int code; /* current working code */ + int incode; /* saves actual input code */ + + /* If any codes are stacked from a previously read symbol, return them */ + if (sinfo->sp > sinfo->symbol_stack) + return (int) *(-- sinfo->sp); + + /* Time to read a new symbol */ + code = GetCode(sinfo); + + if (code == sinfo->clear_code) { + /* Reinit state, swallow any extra Clear codes, and */ + /* return next code, which is expected to be a raw byte. */ + ReInitLZW(sinfo); + do { + code = GetCode(sinfo); + } while (code == sinfo->clear_code); + if (code > sinfo->clear_code) { /* make sure it is a raw byte */ + WARNMS(sinfo->cinfo, JWRN_GIF_BADDATA); + code = 0; /* use something valid */ + } + /* make firstcode, oldcode valid! */ + sinfo->firstcode = sinfo->oldcode = code; + return code; + } + + if (code == sinfo->end_code) { + /* Skip the rest of the image, unless GetCode already read terminator */ + if (! sinfo->out_of_blocks) { + SkipDataBlocks(sinfo); + sinfo->out_of_blocks = TRUE; + } + /* Complain that there's not enough data */ + WARNMS(sinfo->cinfo, JWRN_GIF_ENDCODE); + /* Pad data with 0's */ + return 0; /* fake something usable */ + } + + /* Got normal raw byte or LZW symbol */ + incode = code; /* save for a moment */ + + if (code >= sinfo->max_code) { /* special case for not-yet-defined symbol */ + /* code == max_code is OK; anything bigger is bad data */ + if (code > sinfo->max_code) { + WARNMS(sinfo->cinfo, JWRN_GIF_BADDATA); + incode = 0; /* prevent creation of loops in symbol table */ + } + /* this symbol will be defined as oldcode/firstcode */ + *(sinfo->sp++) = (UINT8) sinfo->firstcode; + code = sinfo->oldcode; + } + + /* If it's a symbol, expand it into the stack */ + while (code >= sinfo->clear_code) { + *(sinfo->sp++) = sinfo->symbol_tail[code]; /* tail is a byte value */ + code = sinfo->symbol_head[code]; /* head is another LZW symbol */ + } + /* At this point code just represents a raw byte */ + sinfo->firstcode = code; /* save for possible future use */ + + /* If there's room in table... */ + if ((code = sinfo->max_code) < LZW_TABLE_SIZE) { + /* Define a new symbol = prev sym + head of this sym's expansion */ + sinfo->symbol_head[code] = (UINT16) sinfo->oldcode; + sinfo->symbol_tail[code] = (UINT8) sinfo->firstcode; + sinfo->max_code++; + /* Is it time to increase code_size? */ + if (sinfo->max_code >= sinfo->limit_code && + sinfo->code_size < MAX_LZW_BITS) { + sinfo->code_size++; + sinfo->limit_code <<= 1; /* keep equal to 2^code_size */ + } + } + + sinfo->oldcode = incode; /* save last input symbol for future use */ + return sinfo->firstcode; /* return first byte of symbol's expansion */ +} + + +LOCAL(void) +ReadColorMap (gif_source_ptr sinfo, int cmaplen, JSAMPARRAY cmap) +/* Read a GIF colormap */ +{ + int i; + + for (i = 0; i < cmaplen; i++) { +#if BITS_IN_JSAMPLE == 8 +#define UPSCALE(x) (x) +#else +#define UPSCALE(x) ((x) << (BITS_IN_JSAMPLE-8)) +#endif + cmap[CM_RED ][i] = (JSAMPLE) UPSCALE(ReadByte(sinfo)); + cmap[CM_GREEN][i] = (JSAMPLE) UPSCALE(ReadByte(sinfo)); + cmap[CM_BLUE ][i] = (JSAMPLE) UPSCALE(ReadByte(sinfo)); + } +} + + +LOCAL(void) +DoExtension (gif_source_ptr sinfo) +/* Process an extension block */ +/* Currently we ignore 'em all */ +{ + int extlabel; + + /* Read extension label byte */ + extlabel = ReadByte(sinfo); + TRACEMS1(sinfo->cinfo, 1, JTRC_GIF_EXTENSION, extlabel); + /* Skip the data block(s) associated with the extension */ + SkipDataBlocks(sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_gif (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + gif_source_ptr source = (gif_source_ptr) sinfo; + U_CHAR hdrbuf[10]; /* workspace for reading control blocks */ + unsigned int width, height; /* image dimensions */ + int colormaplen, aspectRatio; + int c; + + /* Read and verify GIF Header */ + if (! ReadOK(source->pub.input_file, hdrbuf, 6)) + ERREXIT(cinfo, JERR_GIF_NOT); + if (hdrbuf[0] != 'G' || hdrbuf[1] != 'I' || hdrbuf[2] != 'F') + ERREXIT(cinfo, JERR_GIF_NOT); + /* Check for expected version numbers. + * If unknown version, give warning and try to process anyway; + * this is per recommendation in GIF89a standard. + */ + if ((hdrbuf[3] != '8' || hdrbuf[4] != '7' || hdrbuf[5] != 'a') && + (hdrbuf[3] != '8' || hdrbuf[4] != '9' || hdrbuf[5] != 'a')) + TRACEMS3(cinfo, 1, JTRC_GIF_BADVERSION, hdrbuf[3], hdrbuf[4], hdrbuf[5]); + + /* Read and decipher Logical Screen Descriptor */ + if (! ReadOK(source->pub.input_file, hdrbuf, 7)) + ERREXIT(cinfo, JERR_INPUT_EOF); + width = LM_to_uint(hdrbuf, 0); + height = LM_to_uint(hdrbuf, 2); + /* we ignore the color resolution, sort flag, and background color index */ + aspectRatio = UCH(hdrbuf[6]); + if (aspectRatio != 0 && aspectRatio != 49) + TRACEMS(cinfo, 1, JTRC_GIF_NONSQUARE); + + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) MAXCOLORMAPSIZE, (JDIMENSION) NUMCOLORS); + colormaplen = 0; /* indicate initialization */ + + /* Read global colormap if header indicates it is present */ + if (BitSet(hdrbuf[4], COLORMAPFLAG)) { + colormaplen = 2 << (hdrbuf[4] & 0x07); + ReadColorMap(source, colormaplen, source->colormap); + } + + /* Scan until we reach start of desired image. + * We don't currently support skipping images, but could add it easily. + */ + for (;;) { + c = ReadByte(source); + + if (c == ';') /* GIF terminator?? */ + ERREXIT(cinfo, JERR_GIF_IMAGENOTFOUND); + + if (c == '!') { /* Extension */ + DoExtension(source); + continue; + } + + if (c != ',') { /* Not an image separator? */ + WARNMS1(cinfo, JWRN_GIF_CHAR, c); + continue; + } + + /* Read and decipher Local Image Descriptor */ + if (! ReadOK(source->pub.input_file, hdrbuf, 9)) + ERREXIT(cinfo, JERR_INPUT_EOF); + /* we ignore top/left position info, also sort flag */ + width = LM_to_uint(hdrbuf, 4); + height = LM_to_uint(hdrbuf, 6); + source->is_interlaced = (BitSet(hdrbuf[8], INTERLACE) != 0); + + /* Read local colormap if header indicates it is present */ + /* Note: if we wanted to support skipping images, */ + /* we'd need to skip rather than read colormap for ignored images */ + if (BitSet(hdrbuf[8], COLORMAPFLAG)) { + colormaplen = 2 << (hdrbuf[8] & 0x07); + ReadColorMap(source, colormaplen, source->colormap); + } + + source->input_code_size = ReadByte(source); /* get min-code-size byte */ + if (source->input_code_size < 2 || source->input_code_size > 8) + ERREXIT1(cinfo, JERR_GIF_CODESIZE, source->input_code_size); + + /* Reached desired image, so break out of loop */ + /* If we wanted to skip this image, */ + /* we'd call SkipDataBlocks and then continue the loop */ + break; + } + + /* Prepare to read selected image: first initialize LZW decompressor */ + source->symbol_head = (UINT16 FAR *) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, LZW_TABLE_SIZE * SIZEOF(UINT16)); + source->symbol_tail = (UINT8 FAR *) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, LZW_TABLE_SIZE * SIZEOF(UINT8)); + source->symbol_stack = (UINT8 FAR *) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, LZW_TABLE_SIZE * SIZEOF(UINT8)); + InitLZWCode(source); + + /* + * If image is interlaced, we read it into a full-size sample array, + * decompressing as we go; then get_interlaced_row selects rows from the + * sample array in the proper order. + */ + if (source->is_interlaced) { + /* We request the virtual array now, but can't access it until virtual + * arrays have been allocated. Hence, the actual work of reading the + * image is postponed until the first call to get_pixel_rows. + */ + source->interlaced_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) width, (JDIMENSION) height, (JDIMENSION) 1); + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + source->pub.get_pixel_rows = load_interlaced_image; + } else { + source->pub.get_pixel_rows = get_pixel_rows; + } + + /* Create compressor input buffer. */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) width * NUMCOLORS, (JDIMENSION) 1); + source->pub.buffer_height = 1; + + /* Pad colormap for safety. */ + for (c = colormaplen; c < source->clear_code; c++) { + source->colormap[CM_RED ][c] = + source->colormap[CM_GREEN][c] = + source->colormap[CM_BLUE ][c] = CENTERJSAMPLE; + } + + /* Return info about the image. */ + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = NUMCOLORS; + cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */ + cinfo->image_width = width; + cinfo->image_height = height; + + TRACEMS3(cinfo, 1, JTRC_GIF, width, height, colormaplen); +} + + +/* + * Read one row of pixels. + * This version is used for noninterlaced GIF images: + * we read directly from the GIF file. + */ + +METHODDEF(JDIMENSION) +get_pixel_rows (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + gif_source_ptr source = (gif_source_ptr) sinfo; + register int c; + register JSAMPROW ptr; + register JDIMENSION col; + register JSAMPARRAY colormap = source->colormap; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + c = LZWReadByte(source); + *ptr++ = colormap[CM_RED ][c]; + *ptr++ = colormap[CM_GREEN][c]; + *ptr++ = colormap[CM_BLUE ][c]; + } + return 1; +} + + +/* + * Read one row of pixels. + * This version is used for the first call on get_pixel_rows when + * reading an interlaced GIF file: we read the whole image into memory. + */ + +METHODDEF(JDIMENSION) +load_interlaced_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + gif_source_ptr source = (gif_source_ptr) sinfo; + register JSAMPROW sptr; + register JDIMENSION col; + JDIMENSION row; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the interlaced image into the virtual array we've created. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + sptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->interlaced_image, row, (JDIMENSION) 1, TRUE); + for (col = cinfo->image_width; col > 0; col--) { + *sptr++ = (JSAMPLE) LZWReadByte(source); + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Replace method pointer so subsequent calls don't come here. */ + source->pub.get_pixel_rows = get_interlaced_row; + /* Initialize for get_interlaced_row, and perform first call on it. */ + source->cur_row_number = 0; + source->pass2_offset = (cinfo->image_height + 7) / 8; + source->pass3_offset = source->pass2_offset + (cinfo->image_height + 3) / 8; + source->pass4_offset = source->pass3_offset + (cinfo->image_height + 1) / 4; + + return get_interlaced_row(cinfo, sinfo); +} + + +/* + * Read one row of pixels. + * This version is used for interlaced GIF images: + * we read from the virtual array. + */ + +METHODDEF(JDIMENSION) +get_interlaced_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + gif_source_ptr source = (gif_source_ptr) sinfo; + register int c; + register JSAMPROW sptr, ptr; + register JDIMENSION col; + register JSAMPARRAY colormap = source->colormap; + JDIMENSION irow; + + /* Figure out which row of interlaced image is needed, and access it. */ + switch ((int) (source->cur_row_number & 7)) { + case 0: /* first-pass row */ + irow = source->cur_row_number >> 3; + break; + case 4: /* second-pass row */ + irow = (source->cur_row_number >> 3) + source->pass2_offset; + break; + case 2: /* third-pass row */ + case 6: + irow = (source->cur_row_number >> 2) + source->pass3_offset; + break; + default: /* fourth-pass row */ + irow = (source->cur_row_number >> 1) + source->pass4_offset; + } + sptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->interlaced_image, irow, (JDIMENSION) 1, FALSE); + /* Scan the row, expand colormap, and output */ + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + c = GETJSAMPLE(*sptr++); + *ptr++ = colormap[CM_RED ][c]; + *ptr++ = colormap[CM_GREEN][c]; + *ptr++ = colormap[CM_BLUE ][c]; + } + source->cur_row_number++; /* for next time */ + return 1; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_gif (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for GIF format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_gif (j_compress_ptr cinfo) +{ + gif_source_ptr source; + + /* Create module interface object */ + source = (gif_source_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(gif_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_gif; + source->pub.finish_input = finish_input_gif; + + return &source->pub; +} + +#endif /* GIF_SUPPORTED */ diff --git a/jpeg-9d/rdjpgcom.1 b/jpeg-9d/rdjpgcom.1 new file mode 100644 index 0000000..d7741fb --- /dev/null +++ b/jpeg-9d/rdjpgcom.1 @@ -0,0 +1,63 @@ +.TH RDJPGCOM 1 "13 September 2013" +.SH NAME +rdjpgcom \- display text comments from a JPEG file +.SH SYNOPSIS +.B rdjpgcom +[ +.B \-raw +] +[ +.B \-verbose +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B rdjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and prints any text comments found in the file on the standard output. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.SH OPTIONS +.TP +.B \-raw +Normally +.B rdjpgcom +escapes non-printable characters in comments, for security reasons. +This option avoids that. +.PP +.B \-verbose +Causes +.B rdjpgcom +to also display the JPEG image dimensions. +.PP +Switch names may be abbreviated, and are not case sensitive. +.SH HINTS +.B rdjpgcom +does not depend on the IJG JPEG library. Its source code is intended as an +illustration of the minimum amount of code required to parse a JPEG file +header correctly. +.PP +In +.B \-verbose +mode, +.B rdjpgcom +will also attempt to print the contents of any "APP12" markers as text. +Some digital cameras produce APP12 markers containing useful textual +information. If you like, you can modify the source code to print +other APPn marker types as well. +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR wrjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/jpeg-9d/rdjpgcom.c b/jpeg-9d/rdjpgcom.c new file mode 100644 index 0000000..3719154 --- /dev/null +++ b/jpeg-9d/rdjpgcom.c @@ -0,0 +1,515 @@ +/* + * rdjpgcom.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2009 by Bill Allombert, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a very simple stand-alone application that displays + * the text in COM (comment) markers in a JFIF file. + * This may be useful as an example of the minimum logic needed to parse + * JPEG markers. + */ + +#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ +#include "jinclude.h" /* get auto-config symbols, */ + +#ifdef HAVE_LOCALE_H +#include /* Bill Allombert: use locale for isprint */ +#endif +#include /* to declare isupper(), tolower() */ +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif + + +/* + * These macros are used to read the input file. + * To reuse this code in another application, you might need to change these. + */ + +static FILE * infile; /* input JPEG file */ + +/* Return next input byte, or EOF if no more */ +#define NEXTBYTE() getc(infile) + + +/* Error exit handler */ +#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) + + +/* Read one byte, testing for EOF */ +static int +read_1_byte (void) +{ + int c; + + c = NEXTBYTE(); + if (c == EOF) + ERREXIT("Premature EOF in JPEG file"); + return c; +} + +/* Read 2 bytes, convert to unsigned int */ +/* All 2-byte quantities in JPEG markers are MSB first */ +static unsigned int +read_2_bytes (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + if (c1 == EOF) + ERREXIT("Premature EOF in JPEG file"); + c2 = NEXTBYTE(); + if (c2 == EOF) + ERREXIT("Premature EOF in JPEG file"); + return (((unsigned int) c1) << 8) + ((unsigned int) c2); +} + + +/* + * JPEG markers consist of one or more 0xFF bytes, followed by a marker + * code byte (which is not an FF). Here are the marker codes of interest + * in this program. (See jdmarker.c for a more complete list.) + */ + +#define M_SOF0 0xC0 /* Start Of Frame N */ +#define M_SOF1 0xC1 /* N indicates which compression process */ +#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ +#define M_SOF3 0xC3 +#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ +#define M_SOF6 0xC6 +#define M_SOF7 0xC7 +#define M_SOF9 0xC9 +#define M_SOF10 0xCA +#define M_SOF11 0xCB +#define M_SOF13 0xCD +#define M_SOF14 0xCE +#define M_SOF15 0xCF +#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ +#define M_EOI 0xD9 /* End Of Image (end of datastream) */ +#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ +#define M_APP0 0xE0 /* Application-specific marker, type N */ +#define M_APP12 0xEC /* (we don't bother to list all 16 APPn's) */ +#define M_COM 0xFE /* COMment */ + + +/* + * Find the next JPEG marker and return its marker code. + * We expect at least one FF byte, possibly more if the compressor used FFs + * to pad the file. + * There could also be non-FF garbage between markers. The treatment of such + * garbage is unspecified; we choose to skip over it but emit a warning msg. + * NB: this routine must not be used after seeing SOS marker, since it will + * not deal correctly with FF/00 sequences in the compressed image data... + */ + +static int +next_marker (void) +{ + int c; + int discarded_bytes = 0; + + /* Find 0xFF byte; count and skip any non-FFs. */ + c = read_1_byte(); + while (c != 0xFF) { + discarded_bytes++; + c = read_1_byte(); + } + /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs + * are legal as pad bytes, so don't count them in discarded_bytes. + */ + do { + c = read_1_byte(); + } while (c == 0xFF); + + if (discarded_bytes != 0) { + fprintf(stderr, "Warning: garbage data found in JPEG file\n"); + } + + return c; +} + + +/* + * Read the initial marker, which should be SOI. + * For a JFIF file, the first two bytes of the file should be literally + * 0xFF M_SOI. To be more general, we could use next_marker, but if the + * input file weren't actually JPEG at all, next_marker might read the whole + * file and then return a misleading error message... + */ + +static int +first_marker (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + c2 = NEXTBYTE(); + if (c1 != 0xFF || c2 != M_SOI) + ERREXIT("Not a JPEG file"); + return c2; +} + + +/* + * Most types of marker are followed by a variable-length parameter segment. + * This routine skips over the parameters for any marker we don't otherwise + * want to process. + * Note that we MUST skip the parameter segment explicitly in order not to + * be fooled by 0xFF bytes that might appear within the parameter segment; + * such bytes do NOT introduce new markers. + */ + +static void +skip_variable (void) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + (void) read_1_byte(); + length--; + } +} + + +/* + * Process a COM marker. + * We want to print out the marker contents as legible text; + * we must guard against non-text junk and varying newline representations. + */ + +static void +process_COM (int raw) +{ + unsigned int length; + int ch; + int lastch = 0; + + /* Bill Allombert: set locale properly for isprint */ +#ifdef HAVE_LOCALE_H + setlocale(LC_CTYPE, ""); +#endif + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + + while (length > 0) { + ch = read_1_byte(); + if (raw) { + putc(ch, stdout); + /* Emit the character in a readable form. + * Nonprintables are converted to \nnn form, + * while \ is converted to \\. + * Newlines in CR, CR/LF, or LF form will be printed as one newline. + */ + } else if (ch == '\r') { + printf("\n"); + } else if (ch == '\n') { + if (lastch != '\r') + printf("\n"); + } else if (ch == '\\') { + printf("\\\\"); + } else if (isprint(ch)) { + putc(ch, stdout); + } else { + printf("\\%03o", ch); + } + lastch = ch; + length--; + } + printf("\n"); + + /* Bill Allombert: revert to C locale */ +#ifdef HAVE_LOCALE_H + setlocale(LC_CTYPE, "C"); +#endif +} + + +/* + * Process a SOFn marker. + * This code is only needed if you want to know the image dimensions... + */ + +static void +process_SOFn (int marker) +{ + unsigned int length; + unsigned int image_height, image_width; + int data_precision, num_components; + const char * process; + int ci; + + length = read_2_bytes(); /* usual parameter length count */ + + data_precision = read_1_byte(); + image_height = read_2_bytes(); + image_width = read_2_bytes(); + num_components = read_1_byte(); + + switch (marker) { + case M_SOF0: process = "Baseline"; break; + case M_SOF1: process = "Extended sequential"; break; + case M_SOF2: process = "Progressive"; break; + case M_SOF3: process = "Lossless"; break; + case M_SOF5: process = "Differential sequential"; break; + case M_SOF6: process = "Differential progressive"; break; + case M_SOF7: process = "Differential lossless"; break; + case M_SOF9: process = "Extended sequential, arithmetic coding"; break; + case M_SOF10: process = "Progressive, arithmetic coding"; break; + case M_SOF11: process = "Lossless, arithmetic coding"; break; + case M_SOF13: process = "Differential sequential, arithmetic coding"; break; + case M_SOF14: process = "Differential progressive, arithmetic coding"; break; + case M_SOF15: process = "Differential lossless, arithmetic coding"; break; + default: process = "Unknown"; break; + } + + printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n", + image_width, image_height, num_components, data_precision); + printf("JPEG process: %s\n", process); + + if (length != (unsigned int) (8 + num_components * 3)) + ERREXIT("Bogus SOF marker length"); + + for (ci = 0; ci < num_components; ci++) { + (void) read_1_byte(); /* Component ID code */ + (void) read_1_byte(); /* H, V sampling factors */ + (void) read_1_byte(); /* Quantization table number */ + } +} + + +/* + * Parse the marker stream until SOS or EOI is seen; + * display any COM markers. + * While the companion program wrjpgcom will always insert COM markers before + * SOFn, other implementations might not, so we scan to SOS before stopping. + * If we were only interested in the image dimensions, we would stop at SOFn. + * (Conversely, if we only cared about COM markers, there would be no need + * for special code to handle SOFn; we could treat it like other markers.) + */ + +static int +scan_JPEG_header (int verbose, int raw) +{ + int marker; + + /* Expect SOI at start of file */ + if (first_marker() != M_SOI) + ERREXIT("Expected SOI marker first"); + + /* Scan miscellaneous markers until we reach SOS. */ + for (;;) { + marker = next_marker(); + switch (marker) { + /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, + * treated as SOFn. C4 in particular is actually DHT. + */ + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + case M_SOF2: /* Progressive, Huffman */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_SOF9: /* Extended sequential, arithmetic */ + case M_SOF10: /* Progressive, arithmetic */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + if (verbose) + process_SOFn(marker); + else + skip_variable(); + break; + + case M_SOS: /* stop before hitting compressed data */ + return marker; + + case M_EOI: /* in case it's a tables-only JPEG stream */ + return marker; + + case M_COM: + process_COM(raw); + break; + + case M_APP12: + /* Some digital camera makers put useful textual information into + * APP12 markers, so we print those out too when in -verbose mode. + */ + if (verbose) { + printf("APP12 contains:\n"); + process_COM(raw); + } else + skip_variable(); + break; + + default: /* Anything else just gets skipped */ + skip_variable(); /* we assume it has a parameter count... */ + break; + } + } /* end loop */ +} + + +/* Command line parsing code */ + +static const char * progname; /* program name for error messages */ + + +static void +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n"); + + fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname); + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -raw Display non-printable characters in comments (unsafe)\n"); + fprintf(stderr, " -verbose Also display dimensions of JPEG image\n"); + + exit(EXIT_FAILURE); +} + + +static int +keymatch (char * arg, const char * keyword, int minchars) +/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ +/* keyword is the constant keyword (must be lower case already), */ +/* minchars is length of minimum legal abbreviation. */ +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return 0; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return 0; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return 0; + return 1; /* A-OK */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + int argn; + char * arg; + int verbose = 0, raw = 0; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "rdjpgcom"; /* in case C library doesn't provide it */ + + /* Parse switches, if any */ + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (arg[0] != '-') + break; /* not switch, must be file name */ + arg++; /* advance over '-' */ + if (keymatch(arg, "verbose", 1)) { + verbose++; + } else if (keymatch(arg, "raw", 1)) { + raw = 1; + } else + usage(); + } + + /* Open the input file. */ + /* Unix style: expect zero or one file name */ + if (argn < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } + if (argn < argc) { + if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdin\n", progname); + exit(EXIT_FAILURE); + } +#else + infile = stdin; +#endif + } + + /* Scan the JPEG headers. */ + (void) scan_JPEG_header(verbose, raw); + + /* All done. */ + exit(EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/jpeg-9d/rdjpgcom.vcxproj b/jpeg-9d/rdjpgcom.vcxproj new file mode 100644 index 0000000..b1b424d --- /dev/null +++ b/jpeg-9d/rdjpgcom.vcxproj @@ -0,0 +1,102 @@ + + + + + Release + Win32 + + + Release + x64 + + + + {C81513DB-78DC-46BC-BC98-82E745203976} + Win32Proj + rdjpgcom + 10.0 + + + + Application + false + true + Unicode + v142 + + + Application + false + true + Unicode + v142 + + + + + + + + + + + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/jpeg-9d/rdjpgcom.vcxproj.filters b/jpeg-9d/rdjpgcom.vcxproj.filters new file mode 100644 index 0000000..4660d49 --- /dev/null +++ b/jpeg-9d/rdjpgcom.vcxproj.filters @@ -0,0 +1,30 @@ + + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + + + Source Files + + + \ No newline at end of file diff --git a/jpeg-9d/rdppm.c b/jpeg-9d/rdppm.c new file mode 100644 index 0000000..33e469a --- /dev/null +++ b/jpeg-9d/rdppm.c @@ -0,0 +1,500 @@ +/* + * rdppm.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2009-2019 by Bill Allombert, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in PPM/PGM format. + * The extended 2-byte-per-sample raw PPM/PGM formats are supported. + * The PBMPLUS library is NOT required to compile this software + * (but it is highly useful as a set of PPM image manipulation programs). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed PPM format). + */ + +/* Portions of this code are based on the PBMPLUS library, which is: +** +** Copyright (C) 1988 by Jef Poskanzer. +** +** Permission to use, copy, modify, and distribute this software and its +** documentation for any purpose and without fee is hereby granted, provided +** that the above copyright notice appear in all copies and that both that +** copyright notice and this permission notice appear in supporting +** documentation. This software is provided "as is" without express or +** implied warranty. +*/ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef PPM_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +typedef char U_CHAR; +#ifdef CHAR_IS_UNSIGNED +#define UCH(x) ((int) (x)) +#else +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* + * On most systems, reading individual bytes with getc() is drastically less + * efficient than buffering a row at a time with fread(). On PCs, we must + * allocate the buffer in near data space, because we are assuming small-data + * memory model, wherein fread() can't reach far memory. If you need to + * process very wide images on a PC, you might have to compile in large-memory + * model, or else replace fread() with a getc() loop --- which will be much + * slower. + */ + + +/* Private version of data source object */ + +typedef struct { + struct cjpeg_source_struct pub; /* public fields */ + + U_CHAR *iobuffer; /* non-FAR pointer to I/O buffer */ + JSAMPROW pixrow; /* FAR pointer to same */ + size_t buffer_width; /* width of I/O buffer */ + JSAMPLE *rescale; /* => maxval-remapping array, or NULL */ + unsigned int maxval; +} ppm_source_struct; + +typedef ppm_source_struct * ppm_source_ptr; + + +LOCAL(int) +pbm_getc (FILE * infile) +/* Read next char, skipping over any comments */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(infile); + if (ch == '#') { + do { + ch = getc(infile); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(unsigned int) +read_pbm_integer (j_compress_ptr cinfo, FILE * infile) +/* Read an unsigned decimal integer from the PPM file */ +/* Swallows one trailing character after the integer */ +/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ +/* This should not be a problem in practice. */ +{ + register int ch; + register unsigned int val; + + /* Skip any leading whitespace */ + do { + ch = pbm_getc(infile); + if (ch == EOF) + ERREXIT(cinfo, JERR_INPUT_EOF); + } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); + + if (ch < '0' || ch > '9') + ERREXIT(cinfo, JERR_PPM_NONNUMERIC); + + val = ch - '0'; + while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { + val *= 10; + val += ch - '0'; + } + return val; +} + + +/* + * Read one row of pixels. + * + * We provide several different versions depending on input file format. + * In all cases, input is scaled to the size of JSAMPLE. + * + * A really fast path is provided for reading byte/sample raw files with + * maxval = MAXJSAMPLE, which is the normal case for 8-bit data. + */ + + +METHODDEF(JDIMENSION) +get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading text-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + FILE * infile = source->pub.input_file; + register JSAMPROW ptr; + register JSAMPLE *rescale = source->rescale; + unsigned int maxval = source->maxval; + JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + register unsigned int temp; + temp = read_pbm_integer(cinfo, infile); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading text-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + FILE * infile = source->pub.input_file; + register JSAMPROW ptr; + register JSAMPLE *rescale = source->rescale; + unsigned int maxval = source->maxval; + JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + register unsigned int temp; + temp = read_pbm_integer(cinfo, infile); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + temp = read_pbm_integer(cinfo, infile); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + temp = read_pbm_integer(cinfo, infile); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + unsigned int maxval = source->maxval; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register unsigned int temp; + temp = (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + unsigned int maxval = source->maxval; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register unsigned int temp; + temp = (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + temp = (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + temp = (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE. + * In this case we just read right into the JSAMPLE buffer! + * Note that same code works for PPM and PGM files. + */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + return 1; +} + + +METHODDEF(JDIMENSION) +get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-word-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + unsigned int maxval = source->maxval; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register unsigned int temp; + temp = ((unsigned int) UCH(*bufferptr++)) << 8; + temp |= (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-word-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + unsigned int maxval = source->maxval; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register unsigned int temp; + temp = ((unsigned int) UCH(*bufferptr++)) << 8; + temp |= (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + temp = ((unsigned int) UCH(*bufferptr++)) << 8; + temp |= (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + temp = ((unsigned int) UCH(*bufferptr++)) << 8; + temp |= (unsigned int) UCH(*bufferptr++); + if (temp > maxval) + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + *ptr++ = rescale[temp]; + } + return 1; +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + int c; + unsigned int w, h, maxval; + boolean need_iobuffer, use_raw_buffer, need_rescale; + + if (getc(source->pub.input_file) != 'P') + ERREXIT(cinfo, JERR_PPM_NOT); + + c = getc(source->pub.input_file); /* subformat discriminator character */ + + /* detect unsupported variants (ie, PBM) before trying to read header */ + switch (c) { + case '2': /* it's a text-format PGM file */ + case '3': /* it's a text-format PPM file */ + case '5': /* it's a raw-format PGM file */ + case '6': /* it's a raw-format PPM file */ + break; + default: + ERREXIT(cinfo, JERR_PPM_NOT); + } + + /* fetch the remaining header info */ + w = read_pbm_integer(cinfo, source->pub.input_file); + h = read_pbm_integer(cinfo, source->pub.input_file); + maxval = read_pbm_integer(cinfo, source->pub.input_file); + + if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ + ERREXIT(cinfo, JERR_PPM_NOT); + + if (((long) w >> 24) || /* sanity check for buffer allocation below */ + ((long) maxval >> 16)) /* support max 16-bit (2-byte) sample values */ + ERREXIT(cinfo, JERR_PPM_OUTOFRANGE); + + cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */ + cinfo->image_width = (JDIMENSION) w; + cinfo->image_height = (JDIMENSION) h; + source->maxval = maxval; + + /* initialize flags to most common settings */ + need_iobuffer = TRUE; /* do we need an I/O buffer? */ + use_raw_buffer = FALSE; /* do we map input buffer onto I/O buffer? */ + need_rescale = TRUE; /* do we need a rescale array? */ + + switch (c) { + case '2': /* it's a text-format PGM file */ + cinfo->input_components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h); + source->pub.get_pixel_rows = get_text_gray_row; + need_iobuffer = FALSE; + break; + + case '3': /* it's a text-format PPM file */ + cinfo->input_components = 3; + cinfo->in_color_space = JCS_RGB; + TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h); + source->pub.get_pixel_rows = get_text_rgb_row; + need_iobuffer = FALSE; + break; + + case '5': /* it's a raw-format PGM file */ + cinfo->input_components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_PGM, w, h); + if (maxval > 255) { + source->pub.get_pixel_rows = get_word_gray_row; + } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { + source->pub.get_pixel_rows = get_raw_row; + use_raw_buffer = TRUE; + need_rescale = FALSE; + } else { + source->pub.get_pixel_rows = get_scaled_gray_row; + } + break; + + case '6': /* it's a raw-format PPM file */ + cinfo->input_components = 3; + cinfo->in_color_space = JCS_RGB; + TRACEMS2(cinfo, 1, JTRC_PPM, w, h); + if (maxval > 255) { + source->pub.get_pixel_rows = get_word_rgb_row; + } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { + source->pub.get_pixel_rows = get_raw_row; + use_raw_buffer = TRUE; + need_rescale = FALSE; + } else { + source->pub.get_pixel_rows = get_scaled_rgb_row; + } + break; + } + + /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */ + if (need_iobuffer) { + source->buffer_width = (size_t) w * cinfo->input_components * + ((maxval <= 255) ? SIZEOF(U_CHAR) : (2 * SIZEOF(U_CHAR))); + source->iobuffer = (U_CHAR *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, source->buffer_width); + } + + /* Create compressor input buffer. */ + if (use_raw_buffer) { + /* For unscaled raw-input case, we can just map it onto the I/O buffer. */ + /* Synthesize a JSAMPARRAY pointer structure */ + /* Cast here implies near->far pointer conversion on PCs */ + source->pixrow = (JSAMPROW) source->iobuffer; + source->pub.buffer = & source->pixrow; + source->pub.buffer_height = 1; + } else { + /* Need to translate anyway, so make a separate sample buffer. */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1); + source->pub.buffer_height = 1; + } + + /* Compute the rescaling array if required. */ + if (need_rescale) { + INT32 val, half_maxval; + + /* On 16-bit-int machines we have to be careful of maxval = 65535 */ + source->rescale = (JSAMPLE *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, + JPOOL_IMAGE, ((size_t) maxval + (size_t) 1) * SIZEOF(JSAMPLE)); + half_maxval = maxval / 2; + for (val = 0; val <= (INT32) maxval; val++) { + /* The multiplication here must be done in 32 bits to avoid overflow */ + source->rescale[val] = (JSAMPLE) ((val * MAXJSAMPLE + half_maxval) / maxval); + } + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for PPM format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_ppm (j_compress_ptr cinfo) +{ + ppm_source_ptr source; + + /* Create module interface object */ + source = (ppm_source_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(ppm_source_struct)); + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_ppm; + source->pub.finish_input = finish_input_ppm; + + return &source->pub; +} + +#endif /* PPM_SUPPORTED */ diff --git a/jpeg-9d/rdrle.c b/jpeg-9d/rdrle.c new file mode 100644 index 0000000..06f2e8a --- /dev/null +++ b/jpeg-9d/rdrle.c @@ -0,0 +1,380 @@ +/* + * rdrle.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Utah RLE format. + * The Utah Raster Toolkit library is required (version 3.1 or later). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed RLE format). + * + * Based on code contributed by Mike Lijewski, + * with updates from Robert Hutchinson. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef RLE_SUPPORTED + +/* rle.h is provided by the Utah Raster Toolkit. */ + +#include + +/* + * We assume that JSAMPLE has the same representation as rle_pixel, + * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * We support the following types of RLE files: + * + * GRAYSCALE - 8 bits, no colormap + * MAPPEDGRAY - 8 bits, 1 channel colomap + * PSEUDOCOLOR - 8 bits, 3 channel colormap + * TRUECOLOR - 24 bits, 3 channel colormap + * DIRECTCOLOR - 24 bits, no colormap + * + * For now, we ignore any alpha channel in the image. + */ + +typedef enum + { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind; + + +/* + * Since RLE stores scanlines bottom-to-top, we have to invert the image + * to conform to JPEG's top-to-bottom order. To do this, we read the + * incoming image into a virtual array on the first get_pixel_rows call, + * then fetch the required row from the virtual array on subsequent calls. + */ + +typedef struct _rle_source_struct * rle_source_ptr; + +typedef struct _rle_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + rle_kind visual; /* actual type of input file */ + jvirt_sarray_ptr image; /* virtual array to hold the image */ + JDIMENSION row; /* current row # in the virtual array */ + rle_hdr header; /* Input file information */ + rle_pixel **rle_row; /* holds a row returned by rle_getrow() */ + +} rle_source_struct; + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JDIMENSION width, height; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Use RLE library routine to get the header info */ + source->header = *rle_hdr_init(NULL); + source->header.rle_file = source->pub.input_file; + switch (rle_get_setup(&(source->header))) { + case RLE_SUCCESS: + /* A-OK */ + break; + case RLE_NOT_RLE: + ERREXIT(cinfo, JERR_RLE_NOT); + case RLE_NO_SPACE: + ERREXIT(cinfo, JERR_RLE_MEM); + case RLE_EMPTY: + ERREXIT(cinfo, JERR_RLE_EMPTY); + case RLE_EOF: + ERREXIT(cinfo, JERR_RLE_EOF); + default: + ERREXIT(cinfo, JERR_RLE_BADERROR); + } + + /* Figure out what we have, set private vars and return values accordingly */ + + width = source->header.xmax - source->header.xmin + 1; + height = source->header.ymax - source->header.ymin + 1; + source->header.xmin = 0; /* realign horizontally */ + source->header.xmax = width-1; + + cinfo->image_width = width; + cinfo->image_height = height; + cinfo->data_precision = 8; /* we can only handle 8 bit data */ + + if (source->header.ncolors == 1 && source->header.ncmap == 0) { + source->visual = GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height); + } else if (source->header.ncolors == 1 && source->header.ncmap == 1) { + source->visual = MAPPEDGRAY; + TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 1 && source->header.ncmap == 3) { + source->visual = PSEUDOCOLOR; + TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 3 && source->header.ncmap == 3) { + source->visual = TRUECOLOR; + TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 3 && source->header.ncmap == 0) { + source->visual = DIRECTCOLOR; + TRACEMS2(cinfo, 1, JTRC_RLE, width, height); + } else + ERREXIT(cinfo, JERR_RLE_UNSUPPORTED); + + if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) { + cinfo->in_color_space = JCS_GRAYSCALE; + cinfo->input_components = 1; + } else { + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = 3; + } + + /* + * A place to hold each scanline while it's converted. + * (GRAYSCALE scanlines don't need converting) + */ + if (source->visual != GRAYSCALE) { + source->rle_row = (rle_pixel **) (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + width, (JDIMENSION) cinfo->input_components); + } + + /* request a virtual array to hold the image */ + source->image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + width * (JDIMENSION) source->header.ncolors, height, (JDIMENSION) 1); + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + /* count file input as separate pass */ + progress->total_extra_passes++; + } +#endif + + source->pub.buffer_height = 1; +} + + +/* + * Read one row of pixels. + * Called only after load_image has read the image into the virtual array. + * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images. + */ + +METHODDEF(JDIMENSION) +get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + + source->row--; + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); + + return 1; +} + +/* + * Read one row of pixels. + * Called only after load_image has read the image into the virtual array. + * Used for PSEUDOCOLOR images. + */ + +METHODDEF(JDIMENSION) +get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JSAMPROW src_row, dest_row; + JDIMENSION col; + rle_map *colormap; + int val; + + colormap = source->header.cmap; + dest_row = source->pub.buffer[0]; + source->row--; + src_row = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); + + for (col = cinfo->image_width; col > 0; col--) { + val = GETJSAMPLE(*src_row++); + *dest_row++ = (JSAMPLE) (colormap[val ] >> 8); + *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8); + *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8); + } + + return 1; +} + + +/* + * Load the image into a virtual array. We have to do this because RLE + * files start at the lower left while the JPEG standard has them starting + * in the upper left. This is called the first time we want to get a row + * of input. What we do is load the RLE data into the array and then call + * the appropriate routine to read one row from the array. Before returning, + * we set source->pub.get_pixel_rows so that subsequent calls go straight to + * the appropriate row-reading routine. + */ + +METHODDEF(JDIMENSION) +load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JDIMENSION row, col; + JSAMPROW scanline, red_ptr, green_ptr, blue_ptr; + rle_pixel **rle_row; + rle_map *colormap; + char channel; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Read the RLE data into our virtual array. + * We assume here that (a) rle_pixel is represented the same as JSAMPLE, + * and (b) we are not on a machine where FAR pointers differ from regular. + */ + RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */ + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_limit = cinfo->image_height; + progress->pub.pass_counter = 0; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + + switch (source->visual) { + + case GRAYSCALE: + case PSEUDOCOLOR: + for (row = 0; row < cinfo->image_height; row++) { + rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_getrow(&source->header, rle_row); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + break; + + case MAPPEDGRAY: + case TRUECOLOR: + rle_row = source->rle_row; + colormap = source->header.cmap; + for (row = 0; row < cinfo->image_height; row++) { + rle_getrow(&source->header, rle_row); + scanline = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + + for (col = 0; col < cinfo->image_width; col++) { + for (channel = 0; channel < source->header.ncolors; channel++) { + *scanline++ = (JSAMPLE) + (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8); + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + break; + + case DIRECTCOLOR: + rle_row = source->rle_row; + for (row = 0; row < cinfo->image_height; row++) { + rle_getrow(&source->header, rle_row); + scanline = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + + red_ptr = rle_row[0]; + green_ptr = rle_row[1]; + blue_ptr = rle_row[2]; + + for (col = cinfo->image_width; col > 0; col--) { + *scanline++ = *red_ptr++; + *scanline++ = *green_ptr++; + *scanline++ = *blue_ptr++; + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) + progress->completed_extra_passes++; +#endif + + /* Set up to call proper row-extraction routine in future */ + if (source->visual == PSEUDOCOLOR) { + source->pub.buffer = source->rle_row; + source->pub.get_pixel_rows = get_pseudocolor_row; + } else { + source->pub.get_pixel_rows = get_rle_row; + } + source->row = cinfo->image_height; + + /* And fetch the topmost (bottommost) row */ + return (*source->pub.get_pixel_rows) (cinfo, sinfo); +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for RLE format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_rle (j_compress_ptr cinfo) +{ + rle_source_ptr source; + + /* Create module interface object */ + source = (rle_source_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(rle_source_struct)); + /* Fill in method ptrs */ + source->pub.start_input = start_input_rle; + source->pub.finish_input = finish_input_rle; + source->pub.get_pixel_rows = load_image; + + return &source->pub; +} + +#endif /* RLE_SUPPORTED */ diff --git a/jpeg-9d/rdswitch.c b/jpeg-9d/rdswitch.c new file mode 100644 index 0000000..c0f7fed --- /dev/null +++ b/jpeg-9d/rdswitch.c @@ -0,0 +1,366 @@ +/* + * rdswitch.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2003-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to process some of cjpeg's more complicated + * command-line switches. Switches processed here are: + * -qtables file Read quantization tables from text file + * -scans file Read scan script from text file + * -quality N[,N,...] Set quality ratings + * -qslots N[,N,...] Set component quantization table selectors + * -sample HxV[,HxV,...] Set component sampling factors + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include /* to declare isdigit(), isspace() */ + + +LOCAL(int) +text_getc (FILE * file) +/* Read next char, skipping over any comments (# to end of line) */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(file); + if (ch == '#') { + do { + ch = getc(file); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(boolean) +read_text_integer (FILE * file, long * result, int * termchar) +/* Read an unsigned decimal integer from a file, store it in result */ +/* Reads one trailing character after the integer; returns it in termchar */ +{ + register int ch; + register long val; + + /* Skip any leading whitespace, detect EOF */ + do { + ch = text_getc(file); + if (ch == EOF) { + *termchar = ch; + return FALSE; + } + } while (isspace(ch)); + + if (! isdigit(ch)) { + *termchar = ch; + return FALSE; + } + + val = ch - '0'; + while ((ch = text_getc(file)) != EOF) { + if (! isdigit(ch)) + break; + val *= 10; + val += ch - '0'; + } + *result = val; + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline) +/* Read a set of quantization tables from the specified file. + * The file is plain ASCII text: decimal numbers with whitespace between. + * Comments preceded by '#' may be included in the file. + * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. + * The tables are implicitly numbered 0,1,etc. + * NOTE: does not affect the qslots mapping, which will default to selecting + * table 0 for luminance (or primary) components, 1 for chrominance components. + * You must use -qslots if you want a different component->table mapping. + */ +{ + FILE * fp; + int tblno, i, termchar; + long val; + unsigned int table[DCTSIZE2]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open table file %s\n", filename); + return FALSE; + } + tblno = 0; + + while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ + if (tblno >= NUM_QUANT_TBLS) { + fprintf(stderr, "Too many tables in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[0] = (unsigned int) val; + for (i = 1; i < DCTSIZE2; i++) { + if (! read_text_integer(fp, &val, &termchar)) { + fprintf(stderr, "Invalid table data in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[i] = (unsigned int) val; + } + jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno], + force_baseline); + tblno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + fclose(fp); + return TRUE; +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(boolean) +read_scan_integer (FILE * file, long * result, int * termchar) +/* Variant of read_text_integer that always looks for a non-space termchar; + * this simplifies parsing of punctuation in scan scripts. + */ +{ + register int ch; + + if (! read_text_integer(file, result, termchar)) + return FALSE; + ch = *termchar; + while (ch != EOF && isspace(ch)) + ch = text_getc(file); + if (isdigit(ch)) { /* oops, put it back */ + if (ungetc(ch, file) == EOF) + return FALSE; + ch = ' '; + } else { + /* Any separators other than ';' and ':' are ignored; + * this allows user to insert commas, etc, if desired. + */ + if (ch != EOF && ch != ';' && ch != ':') + ch = ' '; + } + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_scan_script (j_compress_ptr cinfo, char * filename) +/* Read a scan script from the specified text file. + * Each entry in the file defines one scan to be emitted. + * Entries are separated by semicolons ';'. + * An entry contains one to four component indexes, + * optionally followed by a colon ':' and four progressive-JPEG parameters. + * The component indexes denote which component(s) are to be transmitted + * in the current scan. The first component has index 0. + * Sequential JPEG is used if the progressive-JPEG parameters are omitted. + * The file is free format text: any whitespace may appear between numbers + * and the ':' and ';' punctuation marks. Also, other punctuation (such + * as commas or dashes) can be placed between numbers if desired. + * Comments preceded by '#' may be included in the file. + * Note: we do very little validity checking here; + * jcmaster.c will validate the script parameters. + */ +{ + FILE * fp; + int scanno, ncomps, termchar; + long val; + jpeg_scan_info * scanptr; +#define MAX_SCANS 100 /* quite arbitrary limit */ + jpeg_scan_info scans[MAX_SCANS]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open scan definition file %s\n", filename); + return FALSE; + } + scanptr = scans; + scanno = 0; + + while (read_scan_integer(fp, &val, &termchar)) { + if (scanno >= MAX_SCANS) { + fprintf(stderr, "Too many scans defined in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr->component_index[0] = (int) val; + ncomps = 1; + while (termchar == ' ') { + if (ncomps >= MAX_COMPS_IN_SCAN) { + fprintf(stderr, "Too many components in one scan in file %s\n", + filename); + fclose(fp); + return FALSE; + } + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->component_index[ncomps] = (int) val; + ncomps++; + } + scanptr->comps_in_scan = ncomps; + if (termchar == ':') { + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ss = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Se = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ah = (int) val; + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->Al = (int) val; + } else { + /* set non-progressive parameters */ + scanptr->Ss = 0; + scanptr->Se = DCTSIZE2-1; + scanptr->Ah = 0; + scanptr->Al = 0; + } + if (termchar != ';' && termchar != EOF) { +bogus: + fprintf(stderr, "Invalid scan entry format in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr++, scanno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + if (scanno > 0) { + /* Stash completed scan list in cinfo structure. + * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, + * but if you want to compress multiple images you'd want JPOOL_PERMANENT. + */ + scanptr = (jpeg_scan_info *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, scanno * SIZEOF(jpeg_scan_info)); + MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); + cinfo->scan_info = scanptr; + cinfo->num_scans = scanno; + } + + fclose(fp); + return TRUE; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +GLOBAL(boolean) +set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline) +/* Process a quality-ratings parameter string, of the form + * N[,N,...] + * If there are more q-table slots than parameters, the last value is replicated. + */ +{ + int val = 75; /* default value */ + int tblno; + char ch; + + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + /* Convert user 0-100 rating to percentage scaling */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining factors to last value */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + } + } + jpeg_default_qtables(cinfo, force_baseline); + return TRUE; +} + + +GLOBAL(boolean) +set_quant_slots (j_compress_ptr cinfo, char *arg) +/* Process a quantization-table-selectors parameter string, of the form + * N[,N,...] + * If there are more components than parameters, the last value is replicated. + */ +{ + int val = 0; /* default table # */ + int ci; + char ch; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + if (val < 0 || val >= NUM_QUANT_TBLS) { + fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", + NUM_QUANT_TBLS-1); + return FALSE; + } + cinfo->comp_info[ci].quant_tbl_no = val; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to last table */ + cinfo->comp_info[ci].quant_tbl_no = val; + } + } + return TRUE; +} + + +GLOBAL(boolean) +set_sample_factors (j_compress_ptr cinfo, char *arg) +/* Process a sample-factors parameter string, of the form + * HxV[,HxV,...] + * If there are more components than parameters, "1x1" is assumed for the rest. + */ +{ + int ci, val1, val2; + char ch1, ch2; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch2 = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) + return FALSE; + if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ + return FALSE; + if (val1 <= 0 || val1 > MAX_SAMP_FACTOR || + val2 <= 0 || val2 > MAX_SAMP_FACTOR) { + fprintf(stderr, "JPEG sampling factors must be 1..%d\n", MAX_SAMP_FACTOR); + return FALSE; + } + cinfo->comp_info[ci].h_samp_factor = val1; + cinfo->comp_info[ci].v_samp_factor = val2; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to 1x1 sampling */ + cinfo->comp_info[ci].h_samp_factor = 1; + cinfo->comp_info[ci].v_samp_factor = 1; + } + } + return TRUE; +} diff --git a/jpeg-9d/rdtarga.c b/jpeg-9d/rdtarga.c new file mode 100644 index 0000000..c72ad73 --- /dev/null +++ b/jpeg-9d/rdtarga.c @@ -0,0 +1,500 @@ +/* + * rdtarga.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2017-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Targa format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed Targa format). + * + * Based on code contributed by Lee Daniel Crocker. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef TARGA_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +typedef char U_CHAR; +#ifdef CHAR_IS_UNSIGNED +#define UCH(x) ((int) (x)) +#else +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* Private version of data source object */ + +typedef struct _tga_source_struct * tga_source_ptr; + +typedef struct _tga_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + j_compress_ptr cinfo; /* back link saves passing separate parm */ + + JSAMPARRAY colormap; /* Targa colormap (converted to my format) */ + + jvirt_sarray_ptr whole_image; /* Needed if funny input row order */ + JDIMENSION current_row; /* Current logical row number to read */ + + /* Pointer to routine to extract next Targa pixel from input file */ + JMETHOD(void, read_pixel, (tga_source_ptr sinfo)); + + /* Result of read_pixel is delivered here: */ + U_CHAR tga_pixel[4]; + + int pixel_size; /* Bytes per Targa pixel (1 to 4) */ + int cmap_length; /* colormap length */ + + /* State info for reading RLE-coded pixels; both counts must be init to 0 */ + int block_count; /* # of pixels remaining in RLE block */ + int dup_pixel_count; /* # of times to duplicate previous pixel */ + + /* This saves the correct pixel-row-expansion method for preload_image */ + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); +} tga_source_struct; + + +/* For expanding 5-bit pixel values to 8-bit with best rounding */ + +static const UINT8 c5to8bits[32] = { + 0, 8, 16, 25, 33, 41, 49, 58, + 66, 74, 82, 90, 99, 107, 115, 123, + 132, 140, 148, 156, 165, 173, 181, 189, + 197, 206, 214, 222, 230, 239, 247, 255 +}; + + + +LOCAL(int) +read_byte (tga_source_ptr sinfo) +/* Read next byte from Targa file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(void) +read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize) +/* Read the colormap from a Targa file */ +{ + int i; + + /* Presently only handles 24-bit BGR format */ + if (mapentrysize != 24) + ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP); + + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + } +} + + +/* + * read_pixel methods: get a single pixel from Targa file into tga_pixel[] + */ + +METHODDEF(void) +read_non_rle_pixel (tga_source_ptr sinfo) +/* Read one Targa pixel from the input file; no RLE expansion */ +{ + register int i; + + for (i = 0; i < sinfo->pixel_size; i++) { + sinfo->tga_pixel[i] = (U_CHAR) read_byte(sinfo); + } +} + +METHODDEF(void) +read_rle_pixel (tga_source_ptr sinfo) +/* Read one Targa pixel from the input file, expanding RLE data as needed */ +{ + register int i; + + /* Duplicate previously read pixel? */ + if (sinfo->dup_pixel_count > 0) { + sinfo->dup_pixel_count--; + return; + } + + /* Time to read RLE block header? */ + if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */ + i = read_byte(sinfo); + if (i & 0x80) { /* Start of duplicate-pixel block? */ + sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */ + sinfo->block_count = 0; /* then read new block header */ + } else { + sinfo->block_count = i & 0x7F; /* number of pixels after this one */ + } + } + + /* Read next pixel */ + for (i = 0; i < sinfo->pixel_size; i++) { + sinfo->tga_pixel[i] = (U_CHAR) read_byte(sinfo); + } +} + + +/* + * Read one row of pixels. + * + * We provide several different versions depending on input file format. + */ + +METHODDEF(JDIMENSION) +get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit grayscale pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); + } + return 1; +} + +METHODDEF(JDIMENSION) +get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit colormap indexes */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JSAMPARRAY colormap; + register JDIMENSION col; + register int t; + int cmaplen; + + ptr = source->pub.buffer[0]; + colormap = source->colormap; + cmaplen = source->cmap_length; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + t = UCH(source->tga_pixel[0]); + if (t >= cmaplen) + ERREXIT(cinfo, JERR_TGA_BADPARMS); + *ptr++ = colormap[0][t]; + *ptr++ = colormap[1][t]; + *ptr++ = colormap[2][t]; + } + return 1; +} + +METHODDEF(JDIMENSION) +get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 16-bit pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register int t; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + t = UCH(source->tga_pixel[0]); + t += UCH(source->tga_pixel[1]) << 8; + /* We expand 5 bit data to 8 bit sample width. + * The format of the 16-bit (LSB first) input word is + * xRRRRRGGGGGBBBBB + */ + ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F]; + t >>= 5; + ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F]; + t >>= 5; + ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F]; + ptr += 3; + } + return 1; +} + +METHODDEF(JDIMENSION) +get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 24-bit pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]); + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); + } + return 1; +} + +/* + * Targa also defines a 32-bit pixel format with order B,G,R,A. + * We presently ignore the attribute byte, so the code for reading + * these pixels is identical to the 24-bit routine above. + * This works because the actual pixel length is only known to read_pixel. + */ + +#define get_32bit_row get_24bit_row + + +/* + * This method is for re-reading the input data in standard top-down + * row order. The entire image has already been read into whole_image + * with proper conversion of pixel format, but it's in a funny row order. + */ + +METHODDEF(JDIMENSION) +get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + JDIMENSION source_row; + + /* Compute row of source that maps to current_row of normal order */ + /* For now, assume image is bottom-up and not interlaced. */ + /* NEEDS WORK to support interlaced images! */ + source_row = cinfo->image_height - source->current_row - 1; + + /* Fetch that row from virtual array */ + source->pub.buffer = (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + source->whole_image, source_row, (JDIMENSION) 1, FALSE); + + source->current_row++; + return 1; +} + + +/* + * This method loads the image into whole_image during the first call on + * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call + * get_memory_row on subsequent calls. + */ + +METHODDEF(JDIMENSION) +preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + JDIMENSION row; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the data into a virtual array in input-file row order. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE); + (*source->get_pixel_rows) (cinfo, sinfo); + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Set up to read from the virtual array in unscrambled order */ + source->pub.get_pixel_rows = get_memory_row; + source->current_row = 0; + /* And read the first row */ + return get_memory_row(cinfo, sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + U_CHAR targaheader[18]; + int idlen, cmaptype, subtype, flags, interlace_type, components; + unsigned int width, height, maplen; + boolean is_bottom_up; + +#define GET_2B(offset) ((unsigned int) UCH(targaheader[offset]) + \ + (((unsigned int) UCH(targaheader[offset+1])) << 8)) + + if (! ReadOK(source->pub.input_file, targaheader, 18)) + ERREXIT(cinfo, JERR_INPUT_EOF); + + /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */ + if (targaheader[16] == 15) + targaheader[16] = 16; + + idlen = UCH(targaheader[0]); + cmaptype = UCH(targaheader[1]); + subtype = UCH(targaheader[2]); + maplen = GET_2B(5); + width = GET_2B(12); + height = GET_2B(14); + source->pixel_size = UCH(targaheader[16]) >> 3; + flags = UCH(targaheader[17]); /* Image Descriptor byte */ + + is_bottom_up = ((flags & 0x20) == 0); /* bit 5 set => top-down */ + interlace_type = flags >> 6; /* bits 6/7 are interlace code */ + + if (cmaptype > 1 || /* cmaptype must be 0 or 1 */ + width <= 0 || height <= 0 || + source->pixel_size < 1 || source->pixel_size > 4 || + (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */ + interlace_type != 0) /* currently don't allow interlaced image */ + ERREXIT(cinfo, JERR_TGA_BADPARMS); + + if (subtype > 8) { + /* It's an RLE-coded file */ + source->read_pixel = read_rle_pixel; + source->block_count = source->dup_pixel_count = 0; + subtype -= 8; + } else { + /* Non-RLE file */ + source->read_pixel = read_non_rle_pixel; + } + + /* Now should have subtype 1, 2, or 3 */ + components = 3; /* until proven different */ + cinfo->in_color_space = JCS_RGB; + + switch (subtype) { + case 1: /* Colormapped image */ + if (source->pixel_size == 1 && cmaptype == 1) + source->get_pixel_rows = get_8bit_row; + else + ERREXIT(cinfo, JERR_TGA_BADPARMS); + TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height); + break; + case 2: /* RGB image */ + switch (source->pixel_size) { + case 2: + source->get_pixel_rows = get_16bit_row; + break; + case 3: + source->get_pixel_rows = get_24bit_row; + break; + case 4: + source->get_pixel_rows = get_32bit_row; + break; + default: + ERREXIT(cinfo, JERR_TGA_BADPARMS); + } + TRACEMS2(cinfo, 1, JTRC_TGA, width, height); + break; + case 3: /* Grayscale image */ + components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + if (source->pixel_size == 1) + source->get_pixel_rows = get_8bit_gray_row; + else + ERREXIT(cinfo, JERR_TGA_BADPARMS); + TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height); + break; + default: + ERREXIT(cinfo, JERR_TGA_BADPARMS); + } + + if (is_bottom_up) { + /* Create a virtual array to buffer the upside-down image. */ + source->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1); + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + /* source->pub.buffer will point to the virtual array. */ + source->pub.buffer_height = 1; /* in case anyone looks at it */ + source->pub.get_pixel_rows = preload_image; + } else { + /* Don't need a virtual array, but do need a one-row input buffer. */ + source->whole_image = NULL; + source->pub.buffer = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) width * components, (JDIMENSION) 1); + source->pub.buffer_height = 1; + source->pub.get_pixel_rows = source->get_pixel_rows; + } + + while (idlen--) /* Throw away ID field */ + (void) read_byte(source); + + if (maplen > 0) { + if (maplen > 256 || GET_2B(3) != 0) + ERREXIT(cinfo, JERR_TGA_BADCMAP); + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3); + source->cmap_length = (int) maplen; + /* and read it from the file */ + read_colormap(source, (int) maplen, UCH(targaheader[7])); + } else { + if (cmaptype) /* but you promised a cmap! */ + ERREXIT(cinfo, JERR_TGA_BADPARMS); + source->colormap = NULL; + source->cmap_length = 0; + } + + cinfo->input_components = components; + cinfo->data_precision = 8; + cinfo->image_width = width; + cinfo->image_height = height; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for Targa format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_targa (j_compress_ptr cinfo) +{ + tga_source_ptr source; + + /* Create module interface object */ + source = (tga_source_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(tga_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_tga; + source->pub.finish_input = finish_input_tga; + + return &source->pub; +} + +#endif /* TARGA_SUPPORTED */ diff --git a/jpeg-9d/readme.dos b/jpeg-9d/readme.dos new file mode 100644 index 0000000..3267876 --- /dev/null +++ b/jpeg-9d/readme.dos @@ -0,0 +1,15 @@ +This archive contains a DOS-friendly version of the Independent JPEG Group's +source code. It differs from the normal distribution in that: + +1. The archive format is zip rather than tar+gzip. You should be able to +unpack it with PKUNZIP (2.04g or later) or Info-Zip's unzip or 7-Zip. + +2. Newlines have been converted from Unix (LF) to DOS (CR/LF) style in all +text files, but not in the binary files (test*.*). + +3. Object files have been included for jmemdosa.asm. See jdosaobj.txt. + +Please see the main README file for the primary documentation. + +If you'd rather have a non-DOSified archive, see the ARCHIVE LOCATIONS section +of README. diff --git a/jpeg-9d/structure.txt b/jpeg-9d/structure.txt new file mode 100644 index 0000000..98e20c7 --- /dev/null +++ b/jpeg-9d/structure.txt @@ -0,0 +1,942 @@ +IJG JPEG LIBRARY: SYSTEM ARCHITECTURE + +Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file provides an overview of the architecture of the IJG JPEG software; +that is, the functions of the various modules in the system and the interfaces +between modules. For more precise details about any data structure or calling +convention, see the include files and comments in the source code. + +We assume that the reader is already somewhat familiar with the JPEG standard. +The README file includes references for learning about JPEG. The file +libjpeg.txt describes the library from the viewpoint of an application +programmer using the library; it's best to read that file before this one. +Also, the file coderules.txt describes the coding style conventions we use. + +In this document, JPEG-specific terminology follows the JPEG standard: + A "component" means a color channel, e.g., Red or Luminance. + A "sample" is a single component value (i.e., one number in the image data). + A "coefficient" is a frequency coefficient (a DCT transform output number). + A "block" is an array of samples or coefficients. + An "MCU" (minimum coded unit) is an interleaved set of blocks of size + determined by the sampling factors, or a single block in a + noninterleaved scan. +We do not use the terms "pixel" and "sample" interchangeably. When we say +pixel, we mean an element of the full-size image, while a sample is an element +of the downsampled image. Thus the number of samples may vary across +components while the number of pixels does not. (This terminology is not used +rigorously throughout the code, but it is used in places where confusion would +otherwise result.) + + +*** System features *** + +The IJG distribution contains two parts: + * A subroutine library for JPEG compression and decompression. + * cjpeg/djpeg, two sample applications that use the library to transform + JFIF JPEG files to and from several other image formats. +cjpeg/djpeg are of no great intellectual complexity: they merely add a simple +command-line user interface and I/O routines for several uncompressed image +formats. This document concentrates on the library itself. + +We desire the library to be capable of supporting all JPEG baseline, extended +sequential, and progressive DCT processes. The library does not support the +hierarchical or lossless processes defined in the standard. + +Within these limits, any set of compression parameters allowed by the JPEG +spec should be readable for decompression. (We can be more restrictive about +what formats we can generate.) Although the system design allows for all +parameter values, some uncommon settings are not yet implemented and may +never be; nonintegral sampling ratios are the prime example. Furthermore, +we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a +run-time option, because most machines can store 8-bit pixels much more +compactly than 12-bit. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, libtiff uses this +library to implement JPEG compression within the TIFF file format.) + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. This code can be omitted if not needed. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + + +*** Portability issues *** + +Portability is an essential requirement for the library. The key portability +issues that show up at the level of system architecture are: + +1. Memory usage. We want the code to be able to run on PC-class machines +with limited memory. Images should therefore be processed sequentially (in +strips), to avoid holding the whole image in memory at once. Where a +full-image buffer is necessary, we should be able to use either virtual memory +or temporary files. + +2. Near/far pointer distinction. To run efficiently on 80x86 machines, the +code should distinguish "small" objects (kept in near data space) from +"large" ones (kept in far data space). This is an annoying restriction, but +fortunately it does not impact code quality for less brain-damaged machines, +and the source code clutter turns out to be minimal with sufficient use of +pointer typedefs. + +3. Data precision. We assume that "char" is at least 8 bits, "short" and +"int" at least 16, "long" at least 32. The code will work fine with larger +data sizes, although memory may be used inefficiently in some cases. However, +the JPEG compressed datastream must ultimately appear on external storage as a +sequence of 8-bit bytes if it is to conform to the standard. This may pose a +problem on machines where char is wider than 8 bits. The library represents +compressed data as an array of values of typedef JOCTET. If no data type +exactly 8 bits wide is available, custom data source and data destination +modules must be written to unpack and pack the chosen JOCTET datatype into +8-bit external representation. + + +*** System overview *** + +The compressor and decompressor are each divided into two main sections: +the JPEG compressor or decompressor proper, and the preprocessing or +postprocessing functions. The interface between these two sections is the +image data that the official JPEG spec regards as its input or output: this +data is in the colorspace to be used for compression, and it is downsampled +to the sampling factors to be used. The preprocessing and postprocessing +steps are responsible for converting a normal image representation to or from +this form. (Those few applications that want to deal with YCbCr downsampled +data can skip the preprocessing or postprocessing step.) + +Looking more closely, the compressor library contains the following main +elements: + + Preprocessing: + * Color space conversion (e.g., RGB to YCbCr). + * Edge expansion and downsampling. Optionally, this step can do simple + smoothing --- this is often helpful for low-quality source data. + JPEG proper: + * MCU assembly, DCT, quantization. + * Entropy coding (sequential or progressive, Huffman or arithmetic). + +In addition to these modules we need overall control, marker generation, +and support code (memory management & error handling). There is also a +module responsible for physically writing the output data --- typically +this is just an interface to fwrite(), but some applications may need to +do something else with the data. + +The decompressor library contains the following main elements: + + JPEG proper: + * Entropy decoding (sequential or progressive, Huffman or arithmetic). + * Dequantization, inverse DCT, MCU disassembly. + Postprocessing: + * Upsampling. Optionally, this step may be able to do more general + rescaling of the image. + * Color space conversion (e.g., YCbCr to RGB). This step may also + provide gamma adjustment [ currently it does not ]. + * Optional color quantization (e.g., reduction to 256 colors). + * Optional color precision reduction (e.g., 24-bit to 15-bit color). + [This feature is not currently implemented.] + +We also need overall control, marker parsing, and a data source module. +The support code (memory management & error handling) can be shared with +the compression half of the library. + +There may be several implementations of each of these elements, particularly +in the decompressor, where a wide range of speed/quality tradeoffs is very +useful. It must be understood that some of the best speedups involve +merging adjacent steps in the pipeline. For example, upsampling, color space +conversion, and color quantization might all be done at once when using a +low-quality ordered-dither technique. The system architecture is designed to +allow such merging where appropriate. + + +Note: it is convenient to regard edge expansion (padding to block boundaries) +as a preprocessing/postprocessing function, even though the JPEG spec includes +it in compression/decompression. We do this because downsampling/upsampling +can be simplified a little if they work on padded data: it's not necessary to +have special cases at the right and bottom edges. Therefore the interface +buffer is always an integral number of blocks wide and high, and we expect +compression preprocessing to pad the source data properly. Padding will occur +only to the next block (block_size-sample) boundary. In an interleaved-scan +situation, additional dummy blocks may be used to fill out MCUs, but the MCU +assembly and disassembly logic will create or discard these blocks internally. +(This is advantageous for speed reasons, since we avoid DCTing the dummy +blocks. It also permits a small reduction in file size, because the +compressor can choose dummy block contents so as to minimize their size +in compressed form. Finally, it makes the interface buffer specification +independent of whether the file is actually interleaved or not.) +Applications that wish to deal directly with the downsampled data must +provide similar buffering and padding for odd-sized images. + + +*** Poor man's object-oriented programming *** + +It should be clear by now that we have a lot of quasi-independent processing +steps, many of which have several possible behaviors. To avoid cluttering the +code with lots of switch statements, we use a simple form of object-style +programming to separate out the different possibilities. + +For example, two different color quantization algorithms could be implemented +as two separate modules that present the same external interface; at runtime, +the calling code will access the proper module indirectly through an "object". + +We can get the limited features we need while staying within portable C. +The basic tool is a function pointer. An "object" is just a struct +containing one or more function pointer fields, each of which corresponds to +a method name in real object-oriented languages. During initialization we +fill in the function pointers with references to whichever module we have +determined we need to use in this run. Then invocation of the module is done +by indirecting through a function pointer; on most machines this is no more +expensive than a switch statement, which would be the only other way of +making the required run-time choice. The really significant benefit, of +course, is keeping the source code clean and well structured. + +We can also arrange to have private storage that varies between different +implementations of the same kind of object. We do this by making all the +module-specific object structs be separately allocated entities, which will +be accessed via pointers in the master compression or decompression struct. +The "public" fields or methods for a given kind of object are specified by +a commonly known struct. But a module's initialization code can allocate +a larger struct that contains the common struct as its first member, plus +additional private fields. With appropriate pointer casting, the module's +internal functions can access these private fields. (For a simple example, +see jdatadst.c, which implements the external interface specified by struct +jpeg_destination_mgr, but adds extra fields.) + +(Of course this would all be a lot easier if we were using C++, but we are +not yet prepared to assume that everyone has a C++ compiler.) + +An important benefit of this scheme is that it is easy to provide multiple +versions of any method, each tuned to a particular case. While a lot of +precalculation might be done to select an optimal implementation of a method, +the cost per invocation is constant. For example, the upsampling step might +have a "generic" method, plus one or more "hardwired" methods for the most +popular sampling factors; the hardwired methods would be faster because they'd +use straight-line code instead of for-loops. The cost to determine which +method to use is paid only once, at startup, and the selection criteria are +hidden from the callers of the method. + +This plan differs a little bit from usual object-oriented structures, in that +only one instance of each object class will exist during execution. The +reason for having the class structure is that on different runs we may create +different instances (choose to execute different modules). You can think of +the term "method" as denoting the common interface presented by a particular +set of interchangeable functions, and "object" as denoting a group of related +methods, or the total shared interface behavior of a group of modules. + + +*** Overall control structure *** + +We previously mentioned the need for overall control logic in the compression +and decompression libraries. In IJG implementations prior to v5, overall +control was mostly provided by "pipeline control" modules, which proved to be +large, unwieldy, and hard to understand. To improve the situation, the +control logic has been subdivided into multiple modules. The control modules +consist of: + +1. Master control for module selection and initialization. This has two +responsibilities: + + 1A. Startup initialization at the beginning of image processing. + The individual processing modules to be used in this run are selected + and given initialization calls. + + 1B. Per-pass control. This determines how many passes will be performed + and calls each active processing module to configure itself + appropriately at the beginning of each pass. End-of-pass processing, + where necessary, is also invoked from the master control module. + + Method selection is partially distributed, in that a particular processing + module may contain several possible implementations of a particular method, + which it will select among when given its initialization call. The master + control code need only be concerned with decisions that affect more than + one module. + +2. Data buffering control. A separate control module exists for each + inter-processing-step data buffer. This module is responsible for + invoking the processing steps that write or read that data buffer. + +Each buffer controller sees the world as follows: + +input data => processing step A => buffer => processing step B => output data + | | | + ------------------ controller ------------------ + +The controller knows the dataflow requirements of steps A and B: how much data +they want to accept in one chunk and how much they output in one chunk. Its +function is to manage its buffer and call A and B at the proper times. + +A data buffer control module may itself be viewed as a processing step by a +higher-level control module; thus the control modules form a binary tree with +elementary processing steps at the leaves of the tree. + +The control modules are objects. A considerable amount of flexibility can +be had by replacing implementations of a control module. For example: +* Merging of adjacent steps in the pipeline is done by replacing a control + module and its pair of processing-step modules with a single processing- + step module. (Hence the possible merges are determined by the tree of + control modules.) +* In some processing modes, a given interstep buffer need only be a "strip" + buffer large enough to accommodate the desired data chunk sizes. In other + modes, a full-image buffer is needed and several passes are required. + The control module determines which kind of buffer is used and manipulates + virtual array buffers as needed. One or both processing steps may be + unaware of the multi-pass behavior. + +In theory, we might be able to make all of the data buffer controllers +interchangeable and provide just one set of implementations for all. In +practice, each one contains considerable special-case processing for its +particular job. The buffer controller concept should be regarded as an +overall system structuring principle, not as a complete description of the +task performed by any one controller. + + +*** Compression object structure *** + +Here is a sketch of the logical structure of the JPEG compression library: + + |-- Colorspace conversion + |-- Preprocessing controller --| + | |-- Downsampling +Main controller --| + | |-- Forward DCT, quantize + |-- Coefficient controller --| + |-- Entropy encoding + +This sketch also describes the flow of control (subroutine calls) during +typical image data processing. Each of the components shown in the diagram is +an "object" which may have several different implementations available. One +or more source code files contain the actual implementation(s) of each object. + +The objects shown above are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the preprocessed input data. This controller invokes preprocessing to + fill the subsampled-data buffer, and JPEG compression to empty it. There is + usually no need for a full-image buffer here; a strip buffer is adequate. + +* Preprocessing controller: buffer controller for the downsampling input data + buffer, which lies between colorspace conversion and downsampling. Note + that a unified conversion/downsampling module would probably replace this + controller entirely. + +* Colorspace conversion: converts application image data into the desired + JPEG color space; also changes the data from pixel-interleaved layout to + separate component planes. Processes one pixel row at a time. + +* Downsampling: performs reduction of chroma components as required. + Optionally may perform pixel-level smoothing as well. Processes a "row + group" at a time, where a row group is defined as Vmax pixel rows of each + component before downsampling, and Vk sample rows afterwards (remember Vk + differs across components). Some downsampling or smoothing algorithms may + require context rows above and below the current row group; the + preprocessing controller is responsible for supplying these rows via proper + buffering. The downsampler is responsible for edge expansion at the right + edge (i.e., extending each sample row to a multiple of block_size samples); + but the preprocessing controller is responsible for vertical edge expansion + (i.e., duplicating the bottom sample row as needed to make a multiple of + block_size rows). + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU assembly, including insertion of dummy DCT + blocks when needed at the right or bottom edge. When performing + Huffman-code optimization or emitting a multiscan JPEG file, this + controller is responsible for buffering the full image. The equivalent of + one fully interleaved MCU row of subsampled data is processed per call, + even when the JPEG file is noninterleaved. + +* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients. + Works on one or more DCT blocks at a time. (Note: the coefficients are now + emitted in normal array order, which the entropy encoder is expected to + convert to zigzag order as necessary. Prior versions of the IJG code did + the conversion to zigzag order within the quantization step.) + +* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the + coded data to the data destination module. Works on one MCU per call. + For progressive JPEG, the same DCT blocks are fed to the entropy coder + during each pass, and the coder must emit the appropriate subset of + coefficients. + +In addition to the above objects, the compression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. + +* Marker writing: generates JPEG markers (except for RSTn, which is emitted + by the entropy encoder when needed). + +* Data destination manager: writes the output JPEG datastream to its final + destination (e.g., a file). The destination manager supplied with the + library knows how to write to a stdio stream or to a memory buffer; + for other behaviors, the surrounding application may provide its own + destination manager. + +* Memory manager: allocates and releases memory, controls virtual arrays + (with backing store management, where required). + +* Error handler: performs formatting and output of error and trace messages; + determines handling of nonfatal errors. The surrounding application may + override some or all of this object's methods to change error handling. + +* Progress monitor: supports output of "percent-done" progress reports. + This object represents an optional callback to the surrounding application: + if wanted, it must be supplied by the application. + +The error handler, destination manager, and progress monitor objects are +defined as separate objects in order to simplify application-specific +customization of the JPEG library. A surrounding application may override +individual methods or supply its own all-new implementation of one of these +objects. The object interfaces for these objects are therefore treated as +part of the application interface of the library, whereas the other objects +are internal to the library. + +The error handler and memory manager are shared by JPEG compression and +decompression; the progress monitor, if used, may be shared as well. + + +*** Decompression object structure *** + +Here is a sketch of the logical structure of the JPEG decompression library: + + |-- Entropy decoding + |-- Coefficient controller --| + | |-- Dequantize, Inverse DCT +Main controller --| + | |-- Upsampling + |-- Postprocessing controller --| |-- Colorspace conversion + |-- Color quantization + |-- Color precision reduction + +As before, this diagram also represents typical control flow. The objects +shown are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the output of JPEG decompression proper. This controller's primary + task is to feed the postprocessing procedure. Some upsampling algorithms + may require context rows above and below the current row group; when this + is true, the main controller is responsible for managing its buffer so as + to make context rows available. In the current design, the main buffer is + always a strip buffer; a full-image buffer is never required. + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU disassembly, including deletion of any dummy + DCT blocks at the right or bottom edge. When reading a multiscan JPEG + file, this controller is responsible for buffering the full image. + (Buffering DCT coefficients, rather than samples, is necessary to support + progressive JPEG.) The equivalent of one fully interleaved MCU row of + subsampled data is processed per call, even when the source JPEG file is + noninterleaved. + +* Entropy decoding: Read coded data from the data source module and perform + Huffman or arithmetic entropy decoding. Works on one MCU per call. + For progressive JPEG decoding, the coefficient controller supplies the prior + coefficients of each MCU (initially all zeroes), which the entropy decoder + modifies in each scan. + +* Dequantization and inverse DCT: like it says. Note that the coefficients + buffered by the coefficient controller have NOT been dequantized; we + merge dequantization and inverse DCT into a single step for speed reasons. + When scaled-down output is asked for, simplified DCT algorithms may be used + that need fewer coefficients and emit fewer samples per DCT block, not the + full 8x8. Works on one DCT block at a time. + +* Postprocessing controller: buffer controller for the color quantization + input buffer, when quantization is in use. (Without quantization, this + controller just calls the upsampler.) For two-pass quantization, this + controller is responsible for buffering the full-image data. + +* Upsampling: restores chroma components to full size. (May support more + general output rescaling, too. Note that if undersized DCT outputs have + been emitted by the DCT module, this module must adjust so that properly + sized outputs are created.) Works on one row group at a time. This module + also calls the color conversion module, so its top level is effectively a + buffer controller for the upsampling->color conversion buffer. However, in + all but the highest-quality operating modes, upsampling and color + conversion are likely to be merged into a single step. + +* Colorspace conversion: convert from JPEG color space to output color space, + and change data layout from separate component planes to pixel-interleaved. + Works on one pixel row at a time. + +* Color quantization: reduce the data to colormapped form, using either an + externally specified colormap or an internally generated one. This module + is not used for full-color output. Works on one pixel row at a time; may + require two passes to generate a color map. Note that the output will + always be a single component representing colormap indexes. In the current + design, the output values are JSAMPLEs, so an 8-bit compilation cannot + quantize to more than 256 colors. This is unlikely to be a problem in + practice. + +* Color reduction: this module handles color precision reduction, e.g., + generating 15-bit color (5 bits/primary) from JPEG's 24-bit output. + Not quite clear yet how this should be handled... should we merge it with + colorspace conversion??? + +Note that some high-speed operating modes might condense the entire +postprocessing sequence to a single module (upsample, color convert, and +quantize in one step). + +In addition to the above objects, the decompression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. This is subdivided into + input and output control: jdinput.c controls only input-side processing, + while jdmaster.c handles overall initialization and output-side control. + +* Marker reading: decodes JPEG markers (except for RSTn). + +* Data source manager: supplies the input JPEG datastream. The source + manager supplied with the library knows how to read from a stdio stream + or from a memory buffer; for other behaviors, the surrounding application + may provide its own source manager. + +* Memory manager: same as for compression library. + +* Error handler: same as for compression library. + +* Progress monitor: same as for compression library. + +As with compression, the data source manager, error handler, and progress +monitor are candidates for replacement by a surrounding application. + + +*** Decompression input and output separation *** + +To support efficient incremental display of progressive JPEG files, the +decompressor is divided into two sections that can run independently: + +1. Data input includes marker parsing, entropy decoding, and input into the + coefficient controller's DCT coefficient buffer. Note that this + processing is relatively cheap and fast. + +2. Data output reads from the DCT coefficient buffer and performs the IDCT + and all postprocessing steps. + +For a progressive JPEG file, the data input processing is allowed to get +arbitrarily far ahead of the data output processing. (This occurs only +if the application calls jpeg_consume_input(); otherwise input and output +run in lockstep, since the input section is called only when the output +section needs more data.) In this way the application can avoid making +extra display passes when data is arriving faster than the display pass +can run. Furthermore, it is possible to abort an output pass without +losing anything, since the coefficient buffer is read-only as far as the +output section is concerned. See libjpeg.txt for more detail. + +A full-image coefficient array is only created if the JPEG file has multiple +scans (or if the application specifies buffered-image mode anyway). When +reading a single-scan file, the coefficient controller normally creates only +a one-MCU buffer, so input and output processing must run in lockstep in this +case. jpeg_consume_input() is effectively a no-op in this situation. + +The main impact of dividing the decompressor in this fashion is that we must +be very careful with shared variables in the cinfo data structure. Each +variable that can change during the course of decompression must be +classified as belonging to data input or data output, and each section must +look only at its own variables. For example, the data output section may not +depend on any of the variables that describe the current scan in the JPEG +file, because these may change as the data input section advances into a new +scan. + +The progress monitor is (somewhat arbitrarily) defined to treat input of the +file as one pass when buffered-image mode is not used, and to ignore data +input work completely when buffered-image mode is used. Note that the +library has no reliable way to predict the number of passes when dealing +with a progressive JPEG file, nor can it predict the number of output passes +in buffered-image mode. So the work estimate is inherently bogus anyway. + +No comparable division is currently made in the compression library, because +there isn't any real need for it. + + +*** Data formats *** + +Arrays of pixel sample values use the following data structure: + + typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE + typedef JSAMPLE *JSAMPROW; ptr to a row of samples + typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows + typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays + +The basic element type JSAMPLE will typically be one of unsigned char, +(signed) char, or short. Short will be used if samples wider than 8 bits are +to be supported (this is a compile-time option). Otherwise, unsigned char is +used if possible. If the compiler only supports signed chars, then it is +necessary to mask off the value when reading. Thus, all reads of JSAMPLE +values must be coded as "GETJSAMPLE(value)", where the macro will be defined +as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere. + +With these conventions, JSAMPLE values can be assumed to be >= 0. This helps +simplify correct rounding during downsampling, etc. The JPEG standard's +specification that sample values run from -128..127 is accommodated by +subtracting 128 from the sample value in the DCT step. Similarly, during +decompression the output of the IDCT step will be immediately shifted back to +0..255. (NB: different values are required when 12-bit samples are in use. +The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be +defined as 255 and 128 respectively in an 8-bit implementation, and as 4095 +and 2048 in a 12-bit implementation.) + +We use a pointer per row, rather than a two-dimensional JSAMPLE array. This +choice costs only a small amount of memory and has several benefits: +* Code using the data structure doesn't need to know the allocated width of + the rows. This simplifies edge expansion/compression, since we can work + in an array that's wider than the logical picture width. +* Indexing doesn't require multiplication; this is a performance win on many + machines. +* Arrays with more than 64K total elements can be supported even on machines + where malloc() cannot allocate chunks larger than 64K. +* The rows forming a component array may be allocated at different times + without extra copying. This trick allows some speedups in smoothing steps + that need access to the previous and next rows. + +Note that each color component is stored in a separate array; we don't use the +traditional layout in which the components of a pixel are stored together. +This simplifies coding of modules that work on each component independently, +because they don't need to know how many components there are. Furthermore, +we can read or write each component to a temporary file independently, which +is helpful when dealing with noninterleaved JPEG files. + +In general, a specific sample value is accessed by code such as + GETJSAMPLE(image[colorcomponent][row][col]) +where col is measured from the image left edge, but row is measured from the +first sample row currently in memory. Either of the first two indexings can +be precomputed by copying the relevant pointer. + + +Since most image-processing applications prefer to work on images in which +the components of a pixel are stored together, the data passed to or from the +surrounding application uses the traditional convention: a single pixel is +represented by N consecutive JSAMPLE values, and an image row is an array of +(# of color components)*(image width) JSAMPLEs. One or more rows of data can +be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is +converted to component-wise storage inside the JPEG library. (Applications +that want to skip JPEG preprocessing or postprocessing will have to contend +with component-wise storage.) + + +Arrays of DCT-coefficient values use the following data structure: + + typedef short JCOEF; a 16-bit signed integer + typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients + typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks + typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows + typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays + +The underlying type is at least a 16-bit signed integer; while "short" is big +enough on all machines of interest, on some machines it is preferable to use +"int" for speed reasons, despite the storage cost. Coefficients are grouped +into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than +"8" and "64"). + +The contents of a coefficient block may be in either "natural" or zigzagged +order, and may be true values or divided by the quantization coefficients, +depending on where the block is in the processing pipeline. In the current +library, coefficient blocks are kept in natural order everywhere; the entropy +codecs zigzag or dezigzag the data as it is written or read. The blocks +contain quantized coefficients everywhere outside the DCT/IDCT subsystems. +(This latter decision may need to be revisited to support variable +quantization a la JPEG Part 3.) + +Notice that the allocation unit is now a row of 8x8 coefficient blocks, +corresponding to block_size rows of samples. Otherwise the structure +is much the same as for samples, and for the same reasons. + +On machines where malloc() can't handle a request bigger than 64Kb, this data +structure limits us to rows of less than 512 JBLOCKs, or a picture width of +4000+ pixels. This seems an acceptable restriction. + + +On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW) +must be declared as "far" pointers, but the upper levels can be "near" +(implying that the pointer lists are allocated in the DS segment). +We use a #define symbol FAR, which expands to the "far" keyword when +compiling on 80x86 machines and to nothing elsewhere. + + +*** Suspendable processing *** + +In some applications it is desirable to use the JPEG library as an +incremental, memory-to-memory filter. In this situation the data source or +destination may be a limited-size buffer, and we can't rely on being able to +empty or refill the buffer at arbitrary times. Instead the application would +like to have control return from the library at buffer overflow/underrun, and +then resume compression or decompression at a later time. + +This scenario is supported for simple cases. (For anything more complex, we +recommend that the application "bite the bullet" and develop real multitasking +capability.) The libjpeg.txt file goes into more detail about the usage and +limitations of this capability; here we address the implications for library +structure. + +The essence of the problem is that the entropy codec (coder or decoder) must +be prepared to stop at arbitrary times. In turn, the controllers that call +the entropy codec must be able to stop before having produced or consumed all +the data that they normally would handle in one call. That part is reasonably +straightforward: we make the controller call interfaces include "progress +counters" which indicate the number of data chunks successfully processed, and +we require callers to test the counter rather than just assume all of the data +was processed. + +Rather than trying to restart at an arbitrary point, the current Huffman +codecs are designed to restart at the beginning of the current MCU after a +suspension due to buffer overflow/underrun. At the start of each call, the +codec's internal state is loaded from permanent storage (in the JPEG object +structures) into local variables. On successful completion of the MCU, the +permanent state is updated. (This copying is not very expensive, and may even +lead to *improved* performance if the local variables can be registerized.) +If a suspension occurs, the codec simply returns without updating the state, +thus effectively reverting to the start of the MCU. Note that this implies +leaving some data unprocessed in the source/destination buffer (ie, the +compressed partial MCU). The data source/destination module interfaces are +specified so as to make this possible. This also implies that the data buffer +must be large enough to hold a worst-case compressed MCU; a couple thousand +bytes should be enough. + +In a successive-approximation AC refinement scan, the progressive Huffman +decoder has to be able to undo assignments of newly nonzero coefficients if it +suspends before the MCU is complete, since decoding requires distinguishing +previously-zero and previously-nonzero coefficients. This is a bit tedious +but probably won't have much effect on performance. Other variants of Huffman +decoding need not worry about this, since they will just store the same values +again if forced to repeat the MCU. + +This approach would probably not work for an arithmetic codec, since its +modifiable state is quite large and couldn't be copied cheaply. Instead it +would have to suspend and resume exactly at the point of the buffer end. + +The JPEG marker reader is designed to cope with suspension at an arbitrary +point. It does so by backing up to the start of the marker parameter segment, +so the data buffer must be big enough to hold the largest marker of interest. +Again, a couple KB should be adequate. (A special "skip" convention is used +to bypass COM and APPn markers, so these can be larger than the buffer size +without causing problems; otherwise a 64K buffer would be needed in the worst +case.) + +The JPEG marker writer currently does *not* cope with suspension. +We feel that this is not necessary; it is much easier simply to require +the application to ensure there is enough buffer space before starting. (An +empty 2K buffer is more than sufficient for the header markers; and ensuring +there are a dozen or two bytes available before calling jpeg_finish_compress() +will suffice for the trailer.) This would not work for writing multi-scan +JPEG files, but we simply do not intend to support that capability with +suspension. + + +*** Memory manager services *** + +The JPEG library's memory manager controls allocation and deallocation of +memory, and it manages large "virtual" data arrays on machines where the +operating system does not provide virtual memory. Note that the same +memory manager serves both compression and decompression operations. + +In all cases, allocated objects are tied to a particular compression or +decompression master record, and they will be released when that master +record is destroyed. + +The memory manager does not provide explicit deallocation of objects. +Instead, objects are created in "pools" of free storage, and a whole pool +can be freed at once. This approach helps prevent storage-leak bugs, and +it speeds up operations whenever malloc/free are slow (as they often are). +The pools can be regarded as lifetime identifiers for objects. Two +pools/lifetimes are defined: + * JPOOL_PERMANENT lasts until master record is destroyed + * JPOOL_IMAGE lasts until done with image (JPEG datastream) +Permanent lifetime is used for parameters and tables that should be carried +across from one datastream to another; this includes all application-visible +parameters. Image lifetime is used for everything else. (A third lifetime, +JPOOL_PASS = one processing pass, was originally planned. However it was +dropped as not being worthwhile. The actual usage patterns are such that the +peak memory usage would be about the same anyway; and having per-pass storage +substantially complicates the virtual memory allocation rules --- see below.) + +The memory manager deals with three kinds of object: +1. "Small" objects. Typically these require no more than 10K-20K total. +2. "Large" objects. These may require tens to hundreds of K depending on + image size. Semantically they behave the same as small objects, but we + distinguish them for two reasons: + * On MS-DOS machines, large objects are referenced by FAR pointers, + small objects by NEAR pointers. + * Pool allocation heuristics may differ for large and small objects. + Note that individual "large" objects cannot exceed the size allowed by + type size_t, which may be 64K or less on some machines. +3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs + (typically large enough for the entire image being processed). The + memory manager provides stripwise access to these arrays. On machines + without virtual memory, the rest of the array may be swapped out to a + temporary file. + +(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large +objects for the data proper and small objects for the row pointers. For +convenience and speed, the memory manager provides single routines to create +these structures. Similarly, virtual arrays include a small control block +and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.) + +In the present implementation, virtual arrays are only permitted to have image +lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is +not very useful since a virtual array's raison d'etre is to store data for +multiple passes through the image.) We also expect that only "small" objects +will be given permanent lifespan, though this restriction is not required by +the memory manager. + +In a non-virtual-memory machine, some performance benefit can be gained by +making the in-memory buffers for virtual arrays be as large as possible. +(For small images, the buffers might fit entirely in memory, so blind +swapping would be very wasteful.) The memory manager will adjust the height +of the buffers to fit within a prespecified maximum memory usage. In order +to do this in a reasonably optimal fashion, the manager needs to allocate all +of the virtual arrays at once. Therefore, there isn't a one-step allocation +routine for virtual arrays; instead, there is a "request" routine that simply +allocates the control block, and a "realize" routine (called just once) that +determines space allocation and creates all of the actual buffers. The +realize routine must allow for space occupied by non-virtual large objects. +(We don't bother to factor in the space needed for small objects, on the +grounds that it isn't worth the trouble.) + +To support all this, we establish the following protocol for doing business +with the memory manager: + 1. Modules must request virtual arrays (which may have only image lifespan) + during the initial setup phase, i.e., in their jinit_xxx routines. + 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be + allocated during initial setup. + 3. realize_virt_arrays will be called at the completion of initial setup. + The above conventions ensure that sufficient information is available + for it to choose a good size for virtual array buffers. +Small objects of any lifespan may be allocated at any time. We expect that +the total space used for small objects will be small enough to be negligible +in the realize_virt_arrays computation. + +In a virtual-memory machine, we simply pretend that the available space is +infinite, thus causing realize_virt_arrays to decide that it can allocate all +the virtual arrays as full-size in-memory buffers. The overhead of the +virtual-array access protocol is very small when no swapping occurs. + +A virtual array can be specified to be "pre-zeroed"; when this flag is set, +never-yet-written sections of the array are set to zero before being made +available to the caller. If this flag is not set, never-written sections +of the array contain garbage. (This feature exists primarily because the +equivalent logic would otherwise be needed in jdcoefct.c for progressive +JPEG mode; we may as well make it available for possible other uses.) + +The first write pass on a virtual array is required to occur in top-to-bottom +order; read passes, as well as any write passes after the first one, may +access the array in any order. This restriction exists partly to simplify +the virtual array control logic, and partly because some file systems may not +support seeking beyond the current end-of-file in a temporary file. The main +implication of this restriction is that rearrangement of rows (such as +converting top-to-bottom data order to bottom-to-top) must be handled while +reading data out of the virtual array, not while putting it in. + + +*** Memory manager internal structure *** + +To isolate system dependencies as much as possible, we have broken the +memory manager into two parts. There is a reasonably system-independent +"front end" (jmemmgr.c) and a "back end" that contains only the code +likely to change across systems. All of the memory management methods +outlined above are implemented by the front end. The back end provides +the following routines for use by the front end (none of these routines +are known to the rest of the JPEG code): + +jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown + +jpeg_get_small, jpeg_free_small interface to malloc and free library routines + (or their equivalents) + +jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines; + else usually the same as + jpeg_get_small/jpeg_free_small + +jpeg_mem_available estimate available memory + +jpeg_open_backing_store create a backing-store object + +read_backing_store, manipulate a backing-store object +write_backing_store, +close_backing_store + +On some systems there will be more than one type of backing-store object +(specifically, in MS-DOS a backing store file might be an area of extended +memory as well as a disk file). jpeg_open_backing_store is responsible for +choosing how to implement a given object. The read/write/close routines +are method pointers in the structure that describes a given object; this +lets them be different for different object types. + +It may be necessary to ensure that backing store objects are explicitly +released upon abnormal program termination. For example, MS-DOS won't free +extended memory by itself. To support this, we will expect the main program +or surrounding application to arrange to call self_destruct (typically via +jpeg_destroy) upon abnormal termination. This may require a SIGINT signal +handler or equivalent. We don't want to have the back end module install its +own signal handler, because that would pre-empt the surrounding application's +ability to control signal handling. + +The IJG distribution includes several memory manager back end implementations. +Usually the same back end should be suitable for all applications on a given +system, but it is possible for an application to supply its own back end at +need. + + +*** Implications of DNL marker *** + +Some JPEG files may use a DNL marker to postpone definition of the image +height (this would be useful for a fax-like scanner's output, for instance). +In these files the SOF marker claims the image height is 0, and you only +find out the true image height at the end of the first scan. + +We could read these files as follows: +1. Upon seeing zero image height, replace it by 65535 (the maximum allowed). +2. When the DNL is found, update the image height in the global image + descriptor. +This implies that control modules must avoid making copies of the image +height, and must re-test for termination after each MCU row. This would +be easy enough to do. + +In cases where image-size data structures are allocated, this approach will +result in very inefficient use of virtual memory or much-larger-than-necessary +temporary files. This seems acceptable for something that probably won't be a +mainstream usage. People might have to forgo use of memory-hogging options +(such as two-pass color quantization or noninterleaved JPEG files) if they +want efficient conversion of such files. (One could improve efficiency by +demanding a user-supplied upper bound for the height, less than 65536; in most +cases it could be much less.) + +The standard also permits the SOF marker to overestimate the image height, +with a DNL to give the true, smaller height at the end of the first scan. +This would solve the space problems if the overestimate wasn't too great. +However, it implies that you don't even know whether DNL will be used. + +This leads to a couple of very serious objections: +1. Testing for a DNL marker must occur in the inner loop of the decompressor's + Huffman decoder; this implies a speed penalty whether the feature is used + or not. +2. There is no way to hide the last-minute change in image height from an + application using the decoder. Thus *every* application using the IJG + library would suffer a complexity penalty whether it cared about DNL or + not. +We currently do not support DNL because of these problems. + +A different approach is to insist that DNL-using files be preprocessed by a +separate program that reads ahead to the DNL, then goes back and fixes the SOF +marker. This is a much simpler solution and is probably far more efficient. +Even if one wants piped input, buffering the first scan of the JPEG file needs +a lot smaller temp file than is implied by the maximum-height method. For +this approach we'd simply treat DNL as a no-op in the decompressor (at most, +check that it matches the SOF image height). + +We will not worry about making the compressor capable of outputting DNL. +Something similar to the first scheme above could be applied if anyone ever +wants to make that work. diff --git a/jpeg-9d/testimg.bmp b/jpeg-9d/testimg.bmp new file mode 100644 index 0000000..11aa0cb Binary files /dev/null and b/jpeg-9d/testimg.bmp differ diff --git a/jpeg-9d/testimg.gif b/jpeg-9d/testimg.gif new file mode 100644 index 0000000..f4dcf92 Binary files /dev/null and b/jpeg-9d/testimg.gif differ diff --git a/jpeg-9d/testimg.jpg b/jpeg-9d/testimg.jpg new file mode 100644 index 0000000..a026e48 Binary files /dev/null and b/jpeg-9d/testimg.jpg differ diff --git a/jpeg-9d/testimg.ppm b/jpeg-9d/testimg.ppm new file mode 100644 index 0000000..1377eef --- /dev/null +++ b/jpeg-9d/testimg.ppm @@ -0,0 +1,4 @@ +P6 +227 149 +255 +0/-0/-10.21/51.51.62/72.83/83/83/:3-:3-:3-:3-:3-:2/91.91.80-80-91.91.:2/80-80-80-80-80-80-80-80-6.+6.+6.+5-*5-*4,)4,)4,)4,)4,)4,)4,)4,)4,)4,)4,).+$/,%/,%0-&1.'2/(30)30)63,63,74-85.85.96/:70:70A;/B<0D>2F@2IA4JB5KC6KD4MD5MD5MD3NB2OC3OC3PD4QE5T>1Y?2b@4nB5}E6G8G9E7F9F9E8F;F>F?G@G@CNCLCLDKDIBF>B@?@?<=;@.@.@.?-?-@-?-?-@,A.A-B,A*A)@*A*?/?/?/>,>,<+<+<+?+?+=*=*=*>+?+@,?:>7=4?1B3D3D3D4?/@2E8H;H9mB2T8*D3#:659549547326216005//50-72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-3--5,-4+,4*+4(*7(+=.1E69LUPdUPdUPd0/-0/-10.10.40-51.62/72.83/83/83/:3-:3-:3-:3-:3-91.91.80-80-80-80-91.91.80-80-80-80-80-80-80-80-6.+6.+5-*5-*5-*4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*/,%0-&0-&1.'2/(30)41*41*63,63,74-74-85.96/:70:70@:.A;/C=1E?3H@3IA4JB5JC3LC4LC4KB3MA1MA1NB2OC3PD4P>0U?1^A3jC4xD6D4D5B3B3@2@4B7C:EAKAICIDHDGBD@D>C;A9@9?.>.>,=+<+<+>->*>*=*=*>+?,@-@8>5>3?1A3D4D3C4A2B6E8I;G:kA3S9*D4$<66;55:4493382271161.61.72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-2.-3--5,-4*+4(*5)+<-0C47I:=h<;vDCJILJST`hk{r{|ylv[\QHsQBkOFaOFaNI_RN_[Yfnot~ojk[]\JVUCXQaXQaXQa/.,/.,0/-10.40-40-51.51.72.72.72.92,92,92,92,92,91.80-7/,7/,7/,7/,80-91.80-80-80-80-80-80-80-80-6.+5-*5-*5-*4,)4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*1.'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:70?9-@:.B<0D>2G?4H@3H@3H@3I@1I@1I@1K?1K?/L@0MA1NB2MA1QA2YB2dC2qC3|C2A2@0<+:+;,>0@4C8F=G>?E@FBGCFDFCEAD?D;@:?:@=@@@A=@;>7@-@-@-?,?,?->,?,?-@-@,A+A,@*A*@)?/>.>.>.=+=+=+<+=,=,<+=)>*>*?+@,B7?5>3>2A4C5D5C4D6F9I=I=F;gA4P:,B6&=77=77<66:4493383072/72/62/62/62/52-52-41,41,41,,1-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24C79_83l?:|E@IBNKZ^ftnw~zsdmUUNEtO?lMBbPEcQHcMH^NK\[[estx|xzlghXZ[KVTEZT`ZT`ZT`.-+/.,/.,0/-10.40-40-40-51.61-61-61-81+81+81+81+50-50-4/,4/,4/,4/,50-50-61.61.61.61.61.61.61.61.3.+3.+3.+2-*2-*2-*1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,30+30+30+41,41,52-52-52-52-52-63.74/850850961961>8,?9-@:.B<0E=2E=2F>1F>1G=1G>/F=.I=/I=/J>0L@0L@0JD4NE4TD4^D3hE2sB1~A/>-9'9'9)<-@3E8I@CACCEDECDAC@C>A;@:?:>=@A?B=A7>5@,@,@,?->,>,?,>-?-?,@-@,@+@*@)@(>.>.>.=-=-=-<*<*=+=+<*<*=+=,>->-B6?5?2@2B4C6B5B5F:H>K@J@|F:aA4K;.?9+@86@86?75>64:5294183073062/62/62/32.32-21,21,21,-2.-2.-2./1./1.00.00.10.5106005//5,-4+,6,-:01>45W6-b<3qA7}D9H@RQ_iis|zu~my^gRQMDyM?rN@dPEgQFfLC^GBVNLZ^^fjnquzvx}vzvwzokoa`bUWYKTUG]V^]V^]V^.-+.-+.-+/.,0/-10.3/,40-3/,4/+4/+4/+4/+6/)6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/850961961<5+=6,?8.@9/B:/C;0C;0C;.D:.D:.D:.G;-H<.I=/J>0K?1GH6KH7PG6XG5aF3jD1uB/|?,;):';(=,B2G7KDBDCDBEBC@@@>>:>:=9<;>?>B>C:A5?0@-?,?,?,>+>+>-?-?,?-?,?+?*?+?*>)?.?.>->->-=,=,=,=,=,=,=,<,=->.>.B4A4@1@3B5C7A8@7B;G?KCJ@uE;Y>3C9-78*@86@86?75>64=53:5294173062/43/43/32.23.12-12,12,,2.-2.-2.-2./1./1.00.00.3205105104..2,,4+,7./901P5*Y9,e>/n@1tB7|KGYcg~pxxs{js]eTTOGLAyPAjPAhMAeJA`GBYHEXKKWMPU^bc`fbcha`f\Z`TWZOUYKWYL`WZ`WZ`WZ,,,,,,---.-+/.,0/-10.3/,2.+2.+3.*3.*3.*3.*3.*3.*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/850850850;4*<5+=6,>7-@7.A8/A9.A9.C9/C9-C9-F:.G;/H<.J>0K?1FI8GH6MH5TG6[F3dC0lA.t?-{<*;);*=,A1F5J:M=E@FAFAE@C?@>==9<:<9;;=?=B=D8A2>,@,@,?+>->->,>,>.>-?,?,>,?+>*>)?)>->->->-=,=,=,<+=,<+<+<+<+=.>/?0C2A2@2A5B9C:@:@9@9H@NGNEoG=R@4?;039-A75A75@64>63<4194083/74/63.43.34/23.13.02-02-02--3/-3/-3/.3/.3/02/02/11/11/32032040/2.-1-,4..5//H4)M5)X8+a<,f>2nGBzYblu{|u|mubi[[SLLBQAnN?jI=cH>`HB^FCX@BO2K?3DG6EF6KE5PD4VC2^C2e@.m>,v=,|;):);*=.B2F7I:DG>F>E>C?@><>9:9:;<@.=->->,?.?-?,>,>*?*>)>->->-=,=,=,<-<-<-<-<,<,=-=0=0>1D2C1A3B6C:AkK5.>5.>5.>5,B8/B8/C9/E8/G:1I<3J=4K?3EC6FB6IC5NB4TA3\@2b>0h=-q<.w9*}8)7*:,=/B2D5E9F;GF@C?@@:9:9=;A;D:E4A-?(A-A-@.@.?.>-?->/>.@.?.?->+?*>)>+>->->-=,=.=-=-=-1?2D2C1B4B6C;C>C>D?PJ[Te\f]s_TYUJFNC>KA@70@72>71=6094.83-63,63.43.34.34.13.13..3-.3-.3--3/-3/-3/.3/.3/.3/.3/02/.0-00.22022000.0/-0/-10.8,,;,)B1*K7.S<4^IHtbnzʂyrwikXVGDI^C@[ABV>DP>EMGQSKWUQ^WU`XS_UR^TT^SV`UaZHaZHaZH,-/,-/------------.-+.-+/.,/.,1-*0,)0,)0,)/+(0+'/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/73081+92,:3-;4.=4/>5.>5.>5.?4.?5,@6-C6.D7.F90G:1H;2F?5H@5J@6N@5R>3W<1\:0a7+k9.t8-|8+9,;/=0?1?2@3B5D8E:G=F>D?B>?=A?D?E>C8C1B.B,A.@-?,?,=-=->.?.<,=,=+>-=,=+=*>*<+<+<+<,<,<,;-;-=/F@C>DAKGXRf]qfth|rfik^S_SCSHQJBLE=D=5<8/95,74-63,33+43.34.23-13.02--2,,1+,1+-2.-2.-2.-2.-2.-2./1./1.02/02/11/11/11/11/11/11/5*2;/3A32C4/J;6]OOymyӐ݂tzjn_bYZPHmHBdA>]>>X?AVBHVLU^U`bbqnn}xv|pulyoguh_k_T`Ta[Eb\Fc]G,-/,-/,-/,-/---------.-+/.,.-+.-+0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,)0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80-91.:2/;30=4/>50>50=4-?4.?4.?4.B5-C6.E80G:2H;3H>5J=5L=6O>6Q=4V;2Z90_7/h8.p7.y6-8-9.;1<1>1@3A5B5E8E:FF8C2B/C-B0A/@.?-?->->.>.=,=.=-=,=+>-=,>,=+=+<,<,<,;-;-<-4@6A7B8H7F7G:I@HBFAJFTMdZre~op~|mlteYgZJZOPLAKI=EC7@>2=:1:7.44*11)23+23-12,/1,/1,.0+.0+.0-/1./1./1./1./1./1./1./1.02/11/11/11/11/11/11/11/5*:9-9<15?53H?:^VTxszΐׄxpykten__yXZsSUjRWjU]j\gmguvrv}vypsfteXfW_YA`ZBb\D,-/,-/,-/,-/,-/---------.-+.-+.-+-,*/+(.*'.*'.*'.*+.*+.*+.*+-)*-)*-)*-)*/+,/+,/+,/+,/+,/+,/+,/+,.*+.*+/+,/+,/+,0,-0,-0,-0,-0,-0,-1-.1-.1-.1-.1-.0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51080-91.:2/;30=31=31=4/=4/?40?4.?4.A4.C60D7/F91G:2H;5J;6K<7N=6P;6S:5V72[60c60k6.t5,}7/9/:0<0<1@3@4@3A3C6C8D:CG@HBH?E:C3B0B.B/A.@->->->->-?0<-=-=,=.>-=,=+=+<*<,<,;+;+<-;,;-<0<0<2>3?4A8C:D;KJDIFKGSM_Vrgqz{wrocqbVdWPQCMN@HI;DD8@@4::055+/0(01)01+/0*/0+./*./*//-//-//-//-//-//-//-//-//-//-00.00.00.00.00.00.00.00.6*>6+;8.6;63HE>_^Yyz|Î˄}{||yq~o|n}oy|{j{iXiW\V<^X>`Z@-.0-.0-.0-.0-.0-.0......---.-+-,*-,*,+).*'.*'.*',*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<42=31=31=31=31>3/>3/>3/@3-A4.C60D71E82G83H94I:5L:6M:6N94Q83T50^72e60o6/x8/90:/;1=1?4?4?2@1A2C5D7D:FIAH>F:C4B0B.A.A.?->,>,=.=.=.<,<.=.=-<.=-=-<,;);+;+;+;,;,;-:,;/<1<1>5@7C:EIICLGPL\Tj^oyzym{lam_UYHQUDKO@EI:@D6;=057,13(01)/0*/.).-).-).-+/.,0/-/.,/.,/.,/.,/.,/.,/.,/.,0/-0/-0/-0/-0/-0/-0/-0/-8*A6):3-1961HJ=bfX{y}~k|iUfSXT7ZV9^Z=+/2+/2-.0-.0-.0-.0-.0...------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/91/:20;31<42=32=32<20<20=20=2.=2.?1.@2/A4.B5/C60D63C84D95G96G96H94K84N51V72_60h70r7/}:1<1=2>2?7?5?5?3A3C5D6E8E;F=G>F=D8B5@0@/A-A-?,>+<,<,=-=/<.<-=-<.<-<,<,<,;+:*:*:*:+:+:,:.;0<1=4?6B9D;G@HALAH?HAKGOLWQf]whw|}tqlte\eRV_LMVCEL0-?1.@2/A30A30?61@72@93A96A96B94E74G51O61W6/a6/j8/u9.0>7>5?5@4B4C4C4D4B5C8E:E;C7@4?1?2A,?-=,=,<+<+<.<.;-E5:@29<134,22*1.)/+(/*'0**3*+4+,1++1++1++1++1++1++1++0,+1-,1-,1-,1-,1-,1-,1-,/.,;(;5(23+(56$CL-\hDt`wƤШɯʰ˯ɪ{wrdx]MaHQQ5QQ5RR6,03,03,03,03./1./1./1./1/////////0/-/.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/<1/=/,>0->0-?1.@2/;60;62;83<94=:5=:5?82A60F5.O4-W5+b6+n8,x:-<,<.:6<5=5@4A4B3B2@0?1@4B7B9@6?5=2?2@-?->,<+;*;,;-;-;,<.;-<-;.;-;,;,9)9)9)9*9*9+~8,}9,=1=4@7B9E>HCKFMHIAGAJFSO\Xh`{ny~w{nixacr[ZhQP]IIUACL;>D60-?1.?1.96/:729839839:4:94;83>71A2+I2*S2)^4(j6)s8*|:*~;+84:5=4@3B3A1@/>-<-=0@4A7@7>4=4=3@-?,=+<*;*;,;,<-;.<.;-;,:-;-;,;,9)9)9(9*9*8*~8,}9,>2?5@7C5.>5.>5.=4-<3.<1-=2.<1-<1/;0.=/.>0/>0/?11H-&C1';5)2:++=-(=.-;.45-?-+H()R%(X((Z.+Z8.[A2\G6wC-{B.C1A3?1;0:/8+;->.B1D0D0B.?,<*6383:2<1@1B0|A/|A/C2A1>1=0;/:.9-9-v:/|@5u=0n9)s@/s@/t<+{@0{<-?4D9H?LANBQCRCHKTRd]ue{lwsz|yk{awhea]\zV[sS]mR[cLVTEPH=J;6G53B,/=&,:#+:#-9#/8".#/-#-,$-,&*+))+-(.1'/2'/4'06&14'14'13'32(32(30(3.)-0,-0,)//'=>0WZErx\gspqrrs{{z{~}|zvroi{e[jWLZIKO@CG8>B3/0*01+01+01+12,12,21,32-43.63.74/74/63.61-50,50,7/,7/,6.+6.,5-+2-*1++0,+0,-/-./-0--/-,1+*/)*.()-/(//(//(//(//)-/)-.*+.*+/+*-,*.-).-)/.*./)./)./)..0....../-./.,/.,1-*3.+3.*5.(6/)8/(90);0*<2)=3*>5,>5,>5.>5.>5.=4-<3,=2.=2.<1-;0.;0.;0.=/.>0/?10F/'D0)A3*=4+96-85.83-<1-?-+D*)K)(P*'U.)[4-_:1c?3s@+xA-A0?2?4;3:1;19.<->.A0B1B/A/@/93:3;2=1?0@0@/?/A1>0=0;/;.:-:,:,w9.x<1s9-n9)r?.s>.q9*u:,}=1@5E:H?K@MBPCQCDJQRd]vfp}w~w}oxag\`VZU}XWyXWpSPbJKVECI;@A998340-0,+/+,.)--(,*,+)+***,+),-(,/)-2(03(03(02(02(10)1/*1-*1,+3,+32-12./0,)--%9:,TWBox[iolnpppw{xwy||{xuqnh{eYjWL[HGK<@D5:>/12,12,12,12,23-23-43.43.54/74/85085085083/72.61-80-80-7/,6.,6.,3.+2,,1-,1-./-.0.1..0--/,+0+*/*).1'//(//(//)-/)-/)-.*+.*+0,+0,+/.*/.*/.*0/*/0*/0*/////////0./0/-1-,1-*2-)4/+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@70?6/>5.=4->3/=2.<1-;0.;0.;0.;0.<1/=20C2*E0+H/+L,-N+/M*.J*/E+.A-,@.*@/(C/(M/'Y0*d1-j30i;+o;-w;0=4<4;594:4;2=2>2@1A2A3B5C6=2=1>1>0>/=.=.=.<.;.:-9,;,;+~=+z=*}=3z<1v:/u;-x@1x@1v<.v;-?3B6F=H?JAKANCPDDHQQc^ugnt~}{ak[eXaV`W`W]QtVMiPC[E=RA6F9/<2*5-&1+%.)$-(1&*1&*1&*1&*1&*1(-2).1+//*0-+0,+0+,0),1(-1&.1&.14.24.0.*'**"66*PUAmv[~ik~hjnn~mqx|zwvtuwyy}}ywspmh{eYkUL[HEG:=?28:-23-23-34.34.34.45/54/54/650961961:72:72:51940940:2/91.91.80-7/-4/,4/,3/.3/.3/01/01/00.1..0--/,,.2).2).2).0*.0*,0*,0*,/+*1-,1-*0/+0/+10+10+10+10+11111100010.10.2.+2.+3.*91.92,;2+<3,>4+@6-@6-A7.A8/A8/B90A8/A81@70>5.?4.=2.=2.<1-;0.;0.<1/=20=20?5,E2.O-.W(0]#/\"0W#/L'.C/.:3-55);5)E1(U.'c+*l*+e;/j;1s=3}<6;8;9;7:6>9?9B9C9B9B9A9@7B/B/@.@.>-<,:+9+8*8*9*9)<)z=(w?(t@(=3{7,x8,z3/>3/=2.=2.=20=20>31>31>7/C41O/2Y*2_%3`#2Y%1N+1B3077-39+68*?5)N1)]-)e+)c;3h<3r=7z=:<<<=;;;:;9>8A:C;CJ?K@LDOGSJycL~hSoYu]}biu|~|~|}{yn}lylwkwmtjogl~dbqZ[hTSZHIK=B@4=6,8/&5+":&(8%'6&'2&&0(&-)(++)).*'+*&,*&,*'+*'+,)*,**,**,-#$2*(50,85,BC5UZFfpWn}^tcqbtexiwkshsiwmzmxlwkvlyq{u{w|wxuzwwtqomhd{_WkPJ^CFB9>:195,560560671671782782872872983<94=:5>;6>;6?:6>95>95?74?74>63=52;62:5294194184184195484373243132021/6-.6-.6-.6-.6-.4..4/,4/,40-40-40-52-32-32-43.43.431431542540841850940:5/=60?6/@7.B8/C9/F90G:1H;2F<3F<3F<3F<3E;2C90B71A60@5/@51>50=4/=4/>42?53?53=82A64I35Q16V.6U-5R/5J22A62::08<.9;-?9)H6*P4)U3)]2+c4.k62t76}77897978}75{:6|=8{?7@9@:@;?;|E0}D0C0A/=.;-:-9,8+9+:+<+{>+x?+uA+tB+2,2,LEXQA8|90F;J>yH:zJ<{M@|NA~NBPEUJYN_uNgwRtzX{^|bis|z||x~tyqvponpp}pxmskk~bgu\_iQWZGPM0%:,+7,*5+)1,(-,'+.').((/().(+-*,,*/+*3)*6',7&,9&,2)$<3,E>4JF:QR@]bLgqVizXm]j\j]pbqeodoerhukrhqitlxrzvyvyvvtwturokjfc|^UlOJ^BHA9@91;4,671782782782893893983:94:94=:5>;6?<7?<7@;7@;7@;7B:7B:7A96@85=84=84<73<73<74<74<74;74:6395284173080.80.80.80.80.80.61.61.61-52-52-52-63.63.54/54/540540651952:72=84=82@93?80A8/C90D:0E;1H;2I=1I=1H>4H>4H>4G=4F<3D:1B8/A60B71@70@72?61?61@72@72A83=84@85B86D97E:8G96G96E:4C90B90B:/B:-D;,F:*H;*H;*].&b0)n3/x7398;;<<>;A>A<?6}=4~;3;5=8>:~C3B3A2?2=1<0;/;/;.|=.{=.|>/|>/|>/}>/}>/.*;8kf~yZTC3-<3,92*41(01).1(+1'+0)/0*2/*6,*:*+@'+D%+G$+H#+A7+LC4WP@[XE`bLgmQiwVj{Wl[gWfWj^nananbrfrkohniqnwsyvxuutssutspnlicb{[TmMH`@MD=E<5@707827828938938939:4:94:94;:5>;6?<7@=8@=8A<8A<8A<8A<8A<8A<8@;7?:6>95>95=84>95>95>95>95=84<73:51940:0.:0.:0.91.91.91.91.72.61-61-63.63.63.74/74/74/540651961;83<94?:4@;5B;3A8/B90C9/E;1H<0I=1J>2K=2K>5K>5J=4J=4F<3E;2C90B8/B92B92A81@72@72@93A:4A:4?74>95=<7>?7?@8@@6D@5J=4J70N5.Q6-Q6+O8*M:+I<)H=)l3(r6,~;3@:DAHDJGLHQJMDD;;28-7-91;4?7?7=6<5=5=4|>3y?3vA3uA3uA3y?3}=3:38373%$<;{zhcG@K@wI:mNfW@jX@r\E}aLeQj{O{{Uw\l`^_R\M[O^muxx΅~}xurruuus{sxrqlphiadtW]gLVX@LJ3GB.L40H3.D3,?2*:1(70&40'40'81):/+?-+C++H(+M%-O$-Q#-PE1[P:d^FgfJilOnuTm{Wl~VkZgVgVm]papbrdvhrlokmipmwtyxwwtustutsqokicb{[TmMGa>SJCKB;F=69:49:49:49:49:4:;5=<7=<7=<7?<7@=8@=8A>9C>:D?;D?;E@8C>8D=7B;5B;5B;5B;5B;5B;5A:4A:4A83A83A83@72@72>71>71>71<71<71;60:5/85085074/74/761961961:72<71=82A:2B;1C:1E;1F<2J>2K?3L@2N@3N@3M@7M@7L?6K>5I<3F<2E;2E;2B90A81A81?80?80?82@93@93<5/LE?IB:E<5OB:K:2J3+\>6Z5-`5.`4+^/'\0%b8,g@1gB2I;G;I?LAF>>7=6D;NDQEVHYKPB@5:0=49;9:675496@:{@8o?3oC6lB4m?2u:27435-3(1EEbaEDWUyvVOFd02b22\31L)'D'#I2,J70F5.E2,E0+H0.I-,I)*O+-V24VK/`W:f_BgdEkoLu}Xu]oWjWlXn]q`sbubudveqksmsoqosrwxzzyzxyqrmjjghdazZTnKIc@TKBSJAPG>9:49:49:49:4:;5;<6>=8?>9>=8@=8A>9A>9B?:D?;D?;D?;FA;E@:E@:E@:D?9D?9E>8E>8E>8E>6E>6D=5C<4D;4D;4C:3B92B92B92B92A81A81@91@93>71<71;60;60:5/85.74-74-96196/96/;60<8/>:1A:0C:1C;0E;1G=1J>0L@2M?2NA1NA1N@5N@5M?6J=4I<3H;2E;1E;2C:1B90A81@91@91@91?;2?;2C:3G81I0,V..j68u99{;;ECD?H@I?G>JANHPLMKE3C2B4B6>36-7+<0C5@.@.E3F6E5H9N@KRGN@F9=8:?=>?_\XQ@5UDvbJa]@Z_?ekIonOshJ{fKkP]V][SZ7SD=]P.dY9ga?ifCnrMz[zbt^r]o]o^q^ubwcwcwcrmwrzvyw~}z|qqljhc`yYTnKJdAWQEVPDUOC8938938939:4;<6<=7?>9@?:@?:B?:C@;C@;C@;D?;D?;D?;FA;FA;FA;E@:E@:G@:G@8F?7IB:HA9H?8G>5F=4E<3E<3D;2D:1D:1D:1C:1D;2D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/96/;7.<8/@9/A:0C;0E;1F<0I=/K?1M@0M@0NA1M@0N@5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:2?;2@<3@<3A=4SEI?MAOBRJSRNSENE2B0@0?1:-7*8+=/E4>+7$:%>+@/B2C5/89BDLKRNRLLB>}:1u;/q9,s5*2-478@?:A@;BA4G=3F<2E;1D:0D:0E;1E;1D;2E<3E<3E<3@91?80?80<71;60:5/:5/:5/96/96-;7.;7.=9.@9/C;0D<1F<0F=.J>0L?/M@0M@0O?/O?/O>4O>4N=3K=2J<1G:1G:1D:0D;2D;2B;1B;1@<3A=4A>5A>5Q9/X+&:?P`OeOfPcGO20:/?.C3F=FG>H2BH6F5B3@3?1>1B4D6G5B/<);&<(:(5&3$7<8>7>6=9@?:BA4G=1H<0G;/E;/E;/E;/E;1E;1D<1D;2D;2@9/@91@91?82<71;60;60:5/;7.;7.;7.<8-?8.A;/C;0D4N=3N=3J<1I;0G;/F90D:0D<1D;2B;1@<1A=2A>5B?6C@7_4-t42KSYiH_:Q2C#+/)9(;&=)@3A=:?0;D4B3?2>2?5C7G;J<>/?-=+:)9':*;-LDTLTNKJ>C3>.<5+7.0+9482@9[PUDxO9~dIlPbF]FeTqdsjb?eAiBkBmAm@o@o@qAqBn=hEmJpGhMiZrbsYc@D]($M-"PC2PR=CO76H.WH1eYCujT{gy~þþyvh{e\sWTmONiHTYBUZCW\E560560671782893:;5=<7>=8@?:B?:C@;DAGB>GD=GD=HC=ID>IE0I=/G>/G>/F<0F<0E;/E;1D<1C:1B90A:2@91@91?82<71;60;60;7.;7.;7,<8-?8.A;/D0K?/M@0NA0P@0O?/O@-P>2N>1M<2L;1I;0H:/F90C9/C;0B<0B;1@<1A=2A?3B@4C@7t50FEY_Ub@Q5F0;*+1%9#;!: =&=.902-:,:-9-6,91A9E;E:?2@0<,6'6)=0D9G=9*@4D=A@D<@?>C>JBRMZWPREL;G6F2D/B1G6L:T:T:T:W=\?aBeDih?jAm@n?o>m=mFn:a>dInJlMmSoXnp_jILt:6\6-O9+OD2SN:`PArdW|p̿m~k^u[VoQSlNU_DV`EWaF560560560560671893:94;:5=<7@=8A>9C@;DAHC?HC?GD=HE>ID>ID>JF=LE=MF2G=1F<0D<1D<1C:1B;1A:2@91?82?82<71<71<8/<8-<8->7-@:.B:/D2B@4@@4+)JKSV=B/6.3./0)1 9!=!== =#;#6"6-8/5.3,71@:B<@6B7A57`UqeSWCN:XGe[a_PTBIDK@D@?BHC?ID@HE>HE>ID>JE?JF=MF>MF2G=1E=2D<1C:1C:1A:2A:2@93?82<71<71<8-<8-<8-?8.@:.B:/D2??3@@467]_Z[78,,/,,#0#8$B(G*G'F$F$C!? 81;29250:6B>D=>7<3<272:<$:*.($&''%%(,)2*5*3(2'/&-%=(2>05)7/?7C9qdm]YFVEi\lfSS@H?L46,4.44BH8G2F3H5I7GY=X:W6W5Y5\6_7e;k:m;ot>vEbNkTqIf?\Rqff^wbvkys{rvfeZVTN~ĻþĪyvi|f`w[\uWbqRapQ`oP201312423653875984984983;:5<<4==5??5AA7CC9EE9EE9HH@HH>HH3B90E<5C:5@85?74@86?67>56:44F85E76B87@78>:;<:=<<>==????A@,B0D2D0B/?,>*<*=-C4F7>03&6+8,:-=/=.(9%44 9%8&6&@4QEIAMIUUVXJP9A4?9DCHCFAA?;=3=/?/@0Q@QCLCC=??@E>G8CGMENEQESAR=S>XCbGiBhHH7H?8F=6C:5C<6A:4?74?74@85>95=84;63>3/=4/>42<74=98<;9=<:>=;@?;C@9G@6J@4L@0O@-P?+P>(=B,?A,E=0H92K63J46F35A57>=;8=69?5?A4C=-J9)^B4sRCK=;-2#6&:'8$9%?(;%=(@,@-=,9*6(5(;+:*9);+?.B/B/@.?.:(<+E6H9?18+7+5+7,:.;/=/;/8/4/0----+/+4)8(;'=&:'7"8%=*;*5&;/G8;1;-<->.F5M?NEGC?@>B>F>HDJCLDPFTBS=S>XBaFhCi?i@lBpGvJzL|IxHtKpRs]z`{XwMqCkAlCjJg^ppugNIv̲Ų}/.,0/-10.21/43/540762761:94::2<<4>>4@@6BB8CC9DD8IF=IG;JH;KJ8MJ7NL7NL7OL9KI:NKBTSQ_^dihxmmlkihcYd[QZQGPJ@IH>FG>CC=A@::1>:1=90:3-94.;60=82=:3>;4?<5?<3C?4F@4I?3L@2O?0P?-Q>-P>*3@&7?'<=+A;-B8/A62>42;31=85B:7H94O2.[+)o-.:=EJ9+2$1"9'<)7$8$<&;&=)A-A/>.<-:-:.>0<.9+:+<+>->-=,?-9(>/L=H:6*2&;05*6+8,:.;/9.7/2,/-.+.+0)2'6&8$:#7$5#8'>-=.7)8.A7<5?8EAKIIJCC?A@CDCC?B;=4:.9*;*<+9)E8NEIE?@X@_DfCiDmFpIwK{L|K{CvGwJtNtZ|aUvCdHkRv=\H`z}~\F;rճξ/.,/.,0/-10,21-32.54/650872991;;3==3??5AA7BB8CC9IE<0?=1@<0?<-A;+F?/H?.K?/M@/O?/P?/Q>/P=.<@)=?*?>,?<-?;0=:3;:5:94<94D95N43[*-o&--83C7H7)7&9(?-?,9&9#;&:&<)>,@/>/<0=/=0@5=2:,8*9+:,:,:*;,;-B4E9?31'2(:13+4*7,8-8.7,3,1,0,.+.)0(1&4$6 8/04$;,4Vet͑]=2aP@wlѥº10,10,0/+0/+10,21,43.54/77/880991;;1==3??5AA7BB8KD:LF:OG:QJ:RK9SL9RM:QK=OKBVTUfdowxÎƏ{wrlid_[~UPnNJaJGXEBM?=B;7696196-86*86)581692891;;/><-?<+C<)D<'I>*J?+L?,M@/M@0M?2M?4L>3M?4K?3F<2B90=909:25<44>57<5>:1H3.\0/{48;D9E2A<+<+@.A/@-<'<'>*8%:'<+=.;/;.<0<1A6>3:/7,7,8+8+8+7+A5C88.1&3)7-6-2+3)5+6,5,4-2*/*/,.*/)0'1#4!67//2"5)9-:0?6E=F>@9<5@9KDNGF<;1=1<0C>EBJJTJYFXCYB]@_BdFjJsOxOzLyIxGwRQ}IqImStVtNiD^F]YkKFd2)jc͖ɿ˾Ⱦȿ84163.52-30+30+41,52-63,85.96/:70<90>;2@=4B?6B?6KC8ME:PF:SJ9TK:UL;SL<=;:6;8396/267465672880<:-A<)D>(G?(I?&J?)IA,JA0IA4IA6HA9G@:R9?46<*=+?-?->,>*?+@-8%9(:+:+9,9.:0;2>7;4818.8.9/8.6,7-C9?50&,#7/<44,1*1*2)3*3+2+/*.(.*-)/)2&3$5"7 75#3#2$2&5)7,;3?8YRRJHAD;F0A3A6<5<6A?EEGIJMMQAD?ECIJTN[JZF\F]A]BaEiJpNwOzMxKxR{R{OvOtVw]{SoD^UjQddt`cKLkeώ<94;8385052-41*41*52+63,74-85.96/;8/=:1?<3A>5B?6KA7MC7RF8UI9WK;WK;UL=SJASJK[Xcnlǚޞ졩홛敘ߔ֐̈zzrqfd|XWiPN\IGRFCJDBG=?K==G;:?;:8<92A;-D=*F@*F@(GA)GB.ED2CC7BC=AC@>BAG9HH,>,?+@,@-?-=*8'8)9*9,8-8.91;3;4:3818192:2706/<3>5912*3*;2<35,0(1)1*1+0+/)-(,(-).)0)2(5%6#7!8 8%8%5%4%4(6+7.7/NGXPZQRIH>E9B5?1<&<&<(;'9(;*>0@4D;?9@:FCIHHGIHJMCFADDIKSQZN]L]J`D^DaFfIlNuOxOxNyYzWvVuYx]{ZuQkI`WkUgN\^kKZSaSaQ_jfɂ~窧@=6=:3:7074-52+52+52+63,74-74-96/;8/=:1?<3@=4A>5M@7OC7RF8WJ:XK:YL-C@-CB.BC3AE7>E=UEYFL7A+A+@,A-A-A-A.A/=+7&7(8)8+8-6-7/8/;2736161729494816/A:8/3*7/=5=58/6-0'0'0(/).)-)+(+(-)/)1)4)5'8&8$8#8$9%7$6&7)8,7+4*3+NGd\`YOFB9<2:/?&>&=&;%9&9*;/>3C9A9E?KHLIGDFEJIFGCDDHMSRZR\N^OaG^GbGdIiNrRvRyRy[u\x`}_|UpMgPgYn[mbsL]SdM_RgI_E]d`tqښA>5@=4?<3=:1;8/96-74+63*52)52)63*74-:70=:3@=6B?8J@6OC7RF8VI9WJ9XK;ZL?[NHTIMXR`gd|}̗瞩꟡ܙҍurhe]ZXR~YP{YQxVOpOG_E?M?:@?;8@@6>>2@B5@F:>E=:C>9CB*?,@.@.?-=,;,6'5(6*7-7-8/91818495:685616183:3C<=670@7[Rlc]T@71'2)1*/)*&'%(&*(-)0*2)1%0#1"5$:(=&=&=)<*;,9+8,6-@871GAc^XQB<@93.<#<$<&<&:(:)<.=2>4C;PJXTOJ@;@:KEFEFEJKPTQWNVKVL\RdOfKeJfMnRsRvPt[wZuZu[w]xZsWnVictVg\mYlDXBXMeIbnhhcˎ赲C?4B>3A=2?;0=90;7.:6-95,73*73*73*83-:5/=82@;5B=7I?5LB6QE7UH8VI8YI9YK>ZMEUKLXP_ebyzɔ䚧䘘،ɀ~uqieb^cVbU]TWOtNHdFCTBAIAAA;=8@C9<7<7=9A=C=B\Q?46,+#)#,)./,-((0.4/7/6,4)2&3%5&='<'<(;(:(7)6(4(8/5-<6PJSOLHA?/,=%>&='<'9(8(9,:/>4B:OFWPQKD=B5JB7ND8RF6TG6WG7YI:YKBWKKXP[b^wsuޗ뙗Ղxtqml`i]dY^VVQyNKhEDV@@J76;?=>HBBKABN?BYFJmX_}fnt}}wpcRpE^I\EP9<3,7(;%; <*<*;);*<,<-<-<.6*8.<1>5@8>7<3:273403/93A;E?A<<5<44,4*7-2', 6*H@64--)+*+,+,*,))/+3,5.4+2(2'2':&;'<(;);*:,8+8,4+;4:5<7ONXYEE02=(<(<(:'9)8*7*7,>2A6JAUKRIH>E:H@IDHCLGSPSSPQMQNWXdZh[pZrUoQlPnRpFmOvZ}[{VqSkVk[mYhYh`m`k\fenfmT[cY}NDlfØ߹IE9HD8FB6D@4B>2@<1?;0>:/:6-95,95,94.:5/<71>93@;5E>6HA7LD7QE5RE4UF3WG7WIC_@EmDJOU]fjreklf]TyFg8U0H>PBM:<7/@.B*/?0@3@36*KBJE50FFZ\HK?B=-;+:*:*:*9,9+8,<0>2F9OBPDH3A=2=9.<8/;7.;60;60<71>93?:4B?8EA8JD8NE4PE1TE0VG4XH9ZMEVMR[Whkl~В噧铕⊌لӅ{umkdd_aX[QQsNHbUFY_CRlBLEOLVU][d]fJuNxPuLnFc?Y5J+?5EAMFK><>6H8J6B)>-=-<->/?2B4D7E:E9B7>5:26-5,3+2*1*4-6090807/6.5,/&5+6)2#1"9)>-<+=-D7KAD?56)-)-.26755301,/,/,0-/-80:1:1<0<0=0?0>17+WL`X;6;:OQEHOT=2:/8,8,:-;.;-:.:-<.B3H9I:D6@2>0E3;18/4*3*4+4,5-9/<2=4<3905-5,6-.$;.<.1".8$=);&:'9+:1=9@@;?27+1,.+,+)+(/.4488:;5564736/7-5*5(5&5'PEmcHA42CC>BUYB;=6706-9/<1=1=.9)<+@.B0B0?.=,<+C8D9H=PGSLOIOJOP_caiitm|duUjRgWoSxUtWp_poyy~msXaam`maos{숊ɂ|wjyhhpYMO:^WGqgݿSM=RL4D=5B;3A:4@93A:4A96B:7@A;CC;IE:NG7QF2RF.UF/WH5XJ=RHFXR\jh}ƒږ奦띤蛢晞⒚ۊ҅ʂ‚ymczWiP]KWGP?H9A;6<5B6H7J5G1D.@/UGG?;76488:;9866=.<.;.;,8+6*3)1&5*3*3(2)3*5,6.7/>3<2;18/7.6,4*3)3&3%4%6&=)>*9$2;(5%3'60;<=@7=27-1..--0.449:;=;>.4/3011/1*2(1%3$2#>/j_TL95@@:=RUJEB=935.8.;0<0=-<*?-@.?-;(;(<)=*>2>2D8LBPFNFMGNLbcbfhqo{hxYmUj[pXs\tbqkt퉇yy_dhrl|cskw餟z\pWFRRL4:B*D)H)N+O(L%H%D&WBF8;5>>BH>F5>08F8E7D7A3=08,3)0%0&1(2(3*5,5,4,4,C8=27-7-:/9/5+1'7*0"0!9&9%5 9#E.:&:)7+3.//055;;BIMGJDD@@>>9:28.4'/(/*.-.0+2*5)7(0!/eY]TA,A/B0=)8%9&;)>,8+8+>1GTK8>=@D@HB;D;BCG99B@D@/-HIHKAG;D8A:?<><;<9A=>9C=LCK@>27+;-9,8-7-3,0,/-1134A19)1 1"8(;*6%22454 3"3%3(3).(2+6+8*8(7&7%6'3'2,3101+2*2+4-6+1*/+,.-4.8,7(5#.3 XHZL<2OG5/IFQRLKDB<8807,9+;+;):'9%:&<)=+=+=,9.;.=1?1?1@1@2A4k_qed[mirocbjituk|ivdm_hafgjnkqk|w}Yj[wZpaz]sMIZ6LR6snX˷YPAXO@XO@VM>UL=TKD:B7?7;89:8;7F?<5<4G>LAC7;,9+7*7+7-4-2.3/5366?0<-6)4&6%6%4"4:":":#;&<*;,8,5*3.5-7-8*6&4"4!3"2$1(/+.,,-,1-3.4*,,-0.2.3*5'7'9'@,*E5?1F>WPC?BAWVRRKJC>=59.9+8(;);(:';'>+?-@/>-9.;0=0=1?0?1B3C6i\mdb[kfolbakluvpo|ir^fY^adqn|vyux~RdUrXnXn[tLN_;QZ;us\úZQBYPAYPAWN?VM>UL=TKCC>C;C7=?AA@D?=896WWBC=B:A7<586696;6HA:35+A5K>H:=/8)7)7+8,7.606387;;5)6*6*6*5(7):*?,556 7"9)8+4(0&=;>8=5*B/1 TE<0A;C?JITSVVSSOMIEC;<28+6&7&7%7$:'<*>-=,=,:.;/<.=/=.?0B4E7\Og]aYlgpoabfgkoP`^khqem`edgqqzwvsnuJ]MjUm񜡟PcVoEOd=Va?ww]\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8RF8JF=KG>@FCA<71>:[WAB?C=@:=8997=8A:E;9/2(/9(8)8+:,:/8083;7=:3+3,5,4-6-7.:.>/9(<)>->.=/=2>6>7?>?*<(=,^PF<3/.-?BUXvurojg^YPIA75(.8'9&8&:)=,=->,<-<.<.=/<-;->0B3E9MA`Wa[pltr`a]a^dFVYegpgodljpstxvssenCXEbRk뒘N\Ql?Ri?ZhDy|_\PB\PB[OA[OAZN@YM?YM?YM?WK=VJc7U8IAEFAIAIAFCAG;J8JDI>A@?JE?83,D@>?>=@'9&5$5'9,;0:/8-?1;-8'7&:'<)=';&>-:*>2B:.+::142673;7C>JEQISHTHUG?0>.<,<->.@.?/?.=0=.<.<.<,=.A3D6LAbZc]nlrr`c`e`gixozlt`h^fkqw{{|pq^h@W>]Oh懍XaXuE\vIgwPfŻ㾺޺޼[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJPI?QI>SK>UL;XM9YM7YM7XM;WK=ULGYSWc_nmktt|~ȍώԏՍӐӋʂ{u|ovgpckn~eyZvMo?c2V0L6G@CGBLBMCIGCJID<45*I@LFCA>=:;;;?=E=H(9$8$8&:,?1A5B5A6I8B1<*:&<)?*<)9&;*6)0'B<1/>A.2'-3-4.71928.5*2&1#E5A2=.:+9):+:,:,/=.<+=,?/A4SGg^d_kinochjqoxp}t~mwcjdlqzw|sukpXfAY:[Kf}lojXoZx`rū٫ӦѥԩԮֱںZN>ZN>ZN>ZN>YM=YM=YM=YM=XL@E@JBKCHGBL8E;F9E68(:*:*:'8%:&:':&9&:);*9+7+5+3+4-)-)/,3.4071828587;8<9?9A9D6G6H5J)1,2024/7-9*<+=,7&9*2?4>4?6?6N0/-.38384-6.80:1;1;0:.:/L?F:?29*7)7*8*8*<->/?0=/<+<+<,>0KAc[c^kioshnrzveroyr{jslvvu}ioflRbA[6YFat{~zf{fhu˭շˮŨґēș˝ˡΧҮٻǾ[N>ZM=ZM=ZM=ZM=ZM=YLXL>YN<=A=E?GBDHAK=M:OBAGDA583.,)&.*:3C9D6@0:(<)<):';(=(;'8%6"7%8)7*5(3(3)3*03587<38,2&-'-)1,3'0%/'6+=(A:2".&0+10/1,4+5)6*6+90>5>7:4615061L?K/6(3%6)9-5*6-C<7421 89352(3)4)5)5+5*5+7+YNRFH;@4=@ABICMAN>NA<@9?6?3=/=0E8MD61;61.2.C.&/(<7E@:7/,.*41:7?3;.5)3&5*:.;08.bWZOD86,:/9-3)6,1%2&2&4'7':,<.=/:.C;\Wppsvv~yq|{xu}s{r~q}lxisbmI\=\8[:Vek}~i|d}cju|vxqwo|rtwuy§̹־ʻZM1B6?6?8A==;:<:@7=4<16;3:06-2.314364/:572DADA/+2."41?/E5G7C8?9=<9>9A:E>GAH@E@B<4908-:*9(:*?3F9665:7C=OEI<4%9&:'<)=+>,=*:)9)8'2#/#4*=3?6912+7&6&3#/"-"+%,&+(++(+'-(5%8523(5.;4?8C;D+616=8<7=4<2;/:.7*6);/@8TMgeorz~{{zxwsl}ftbn]kG^:Z9\AZ_cgk^eOhOlRtX{\}^x\qX`yO_P`UeYm`ug{jmptvyyz~ǹ˸̴[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<`P@^Q@]P@\NC\NE[NF\OI]PJ`NdcSmfX{g^ohzu|{yxucOyAF@@A=F;J;J;F9B:@?;A:D7>850-&:)8)5(2'/'.',(,*+*(,)1+7';";="A8G(6/;P\`lP\^N>^N?^N?_OB`PC`OEbM\cPdcUodZlevr~wv~‰ЁwkXuFf=MDPJNJHG>GBB>C>G@HCIDDB=?9A5=/:+;*:)9*<.?6FB<;ABAA:8JBXLL>@08(3#8(<-:*7)8+0%3)8/;4:3500++'4,4-2.314345586;/4.60=1C.F*G,L1TP3D2A3>5<89733*/$2*-(61XT\ZXV@AHHB@<7706-8-9+7'3!:%9$;(=-;-6)8.>5NGEA501->9?:8171/011427392:/9.:.6*7-IB_Ynl}v}x~zxsj{dt_nUeF]6V7ZF_TRvaBJoR-H:QCTDK@AA>DAEBEFAF@EBFDEEAC:?4@3;-8(9(:)9(:-;3IE??;>682/A:ZPg[QCA34'6)9+8+6+8,0&5-;4:440/,-+-,4;3;3<2=1>0=0?0@1A2D5K5O0P-Q1X:d7BO\an`nXfQbEX8J@S:G2;/23-9-=+>(9/2(JBkcLGPM<9;9LJ@<7/7-(;%=)?-9)4':1C=HAC?722.;7:62.2-)++,.-3/61:1<1>26)4)B:XRjh|}v}y{xqh{bt^oSeI`9X9[I_QNmZ:Em8ZvCa|InSvY|]bgll{m|o}p~onllqqrronptvtwï̾ŽӫZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M;_N<_N<^O<^O<_P;_P;aPH$H0Q;UA6>1?19+7':)=*=,>1>7=:79/3/03294NElaj[QCD>61;7UQF@918-:,9(:&;%B)<&<&=*8(3(=4MFGCEB96307341/+2-)/*/--0/4/7/;1>2:,4(;2NHb^yzz}}xn~dw^p[lN`Ha8W7YH]JGcS1Al6ZtDf~NuZcfjnsttr}p}nmlknpoolknpsrwƱοŷҤZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M=_N<_N<^O<`Q>aR=bQ=bQ=bR;bP:aO9`N8jNMgNRbQ[cWkjfuv}}y{˃{|qsgjTXAG#M.T7W9P>NEMEH?BBDAC@AA?C?B9?4=0?19+8(=,A.B1C7D=6457,002880+5-UKzn^RD7=0<06,6+90708271401/105387=>>>==<=:@$I&N$Q%U0e=sgralXeR_Q`M]?R1B:J4?-0-(5'>&C%E"7&9(WH<0A87/3/C@XSHA916*6&5$6"9#B*<%:%<*7&3'A7SLIEGE:82.411-.)4.'-',)+*)-(1*5,9->13(7.HB\Xwu~xl|`sZlXiHZE^4S3RCXE@\L*?j4Uo?d|Lw\hlptx{xt|mzi}ghhkmmlj}ilostx«ǶȻӞ]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^L8\J>]K?]M@\L=ZM=ZO=\Q?^SA_T@_R?^Q@aQAcRBdQCdNAcM@pKEjKIfOUgZknlv|}̃{~uml]fRN[DQ>LANCQ>K:G4;/8+:$C0=,6(?5D=;56183716-7)9(=';"774PLXOD98(?.C3;-4+GD.14;4?+9@Q(9&+*-*-"#$()(("+1 )&1.<$5Yn+@`j^iYcT[PTHI@;:1A2F2D.;$57#;)=+8183EC;9234544CAKFKED;:04+4*3+2*?19,.#',"7/C:G=PFE;801*/-01/3.4141201/00.1+4+8-=/2#?0>3`Wtqwe}[wXuSoJgDc7Y9]>[]kC=PI/F`;Xw^N?^N?[N>ZO=\Q?^SA_TB]QA]P@_OB`NBbPFcOFcOFkLGjMOgS\h_rnow~~̢wx|xuhjYZgN\FRHUJVER?J;E9A:>::=:?7>4+?-9(:,A6<47/<7404-4*4(7&:&;%;"52A;MDI>>/8(8);.<2JF/15<6A.68,E4H6?,1)()-':6TRHG5445<=WUGBGAB99/4+6,7/5.?5:15.3+4.83?9E=JBA86/1*0-1103.3141201/00.1+4+8->03$=.=2^Uvsue|[vWtQoIhAa8Z=_F`Q\{?7NH.Ga>Yx=eKsYxawbzf|i}j|i|i|h{e{d}c}cd{l}n}l}i}e}cccfkpu|zdoqR]_]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8^K<_N>aP@`P@]P?[O?[O?[RC[QE[QE\OF\OG_PKcQOfTRhTUiTQiVXi]kmisvz͉ٟ֗ʪ}烅~tve`kS\GQFQHREQ@K=G6=7:99<7@7A4?0=-@-=+;*B4I?;20)926/5.7,7*7(7$:%<'3/4.A9OCH:6%3#@2>5HD134;6@4@ES3A),"&#&03--''%%12(*7:+1)13?R^=KYiafV\OTMREI:;74?96,?2C5>18-3),%' % 0*FC::,,44AB^]>:C;A9=39/=4@8@9A>=;>=A??>;9?=IDA;=45,2+2-3112/2040201/0/.0+4+8-?14%9*;0[Rzw~rcyZtTqMmFg=_:^BbQg?Fn<1OK2KcA[z?hLrZu^t_wc{gzgyfyfycxbyb{a|b}byj{j{h{e{az^|^`hnstwvypngVb`COM4@>^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^L6`N:aP<`Q>]P?ZN>YPAXPEXOH[RM_UTcWYeX_iYcl\fm]hlbclemolrtx~τߊ狇ޝ٬ɳy{߁yvnrbgU\LUFPBM>G;D5;7:97=7A6B4B1?.;,=/>0G:RGH?6.1)9181;0<0;-6%6&9'402-=4OCK=;,8*B67.>:/0164<8BNZKW>C38$&/1,,22+*0.::37-29BENYcLY?AADCF>C9=8988:58391:2A:NHVSNNAB82:5KGNLQRYZRQYX51>6C9@7?5A9CC:?58=?LJ93704+3,5.302101040201.0/.0+3+8-@26'6'9.WM}y{ocwXqNmFh?c8\=`IdYh25d<0SQ8TgG`}EjPsYt\u^wbyeyfwdvawav`x`z`{a|byhzg|fzbz_z]|]~_emrsustii_RaZDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;_K2_M5aO9_P;\O>ZN@XPEXQKYQO^X\g`hnfsshysg{sg}tfnnzorrwv|y~׃刋쒍뛌ߞƞtkmqvj{illklfi]`QWEM;B5=596898>7A7C5C0A-8+@3;.;1RH]SNC;2907,9/>1=16*4'7(2-60=5E9F9C3A2?20&620/-1-47?OYZd[_OS.103--EE66,,-.>@2537ch=C*2-4();=AE7:378;89..43<9HESS`chndk[eB7Eb8_4\@aMcWap/+\A0XX>]lMbIlSt\u_v_xcyexbu`u`u_v_w_z`{a|byd{f|dz`y^yZ{Z}\_gmpst{nrffvi[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<`L1aM2`N6^O:[N>YOE[RMZTT_Zahbprmzu{tyrzpyoovpyt}wz~Ճዋ唏㗊ҙ~yl[X>H?PIVRVURRJM=C387<9;;9=8A8C4B0@-9.A65+.$J?h\eZVI=26)4):0;05,3)6+/+61;2:/?0F7C39+1&3-31-.*.17EJS[_d\a9<9<+.JK89//55()(+YZ?B9=7: %))=>BE49,217/5(,37KNaehncl_k_m_nNIOJ]ZVTMMGH3231AcWh[fYPB?25)7,:05,2+6.0,4/7/8.>1C4?04'4*1)2/..-.1468?COTY^FKRW47FJ889;>=A6<-4)219/>)7-:9CAHAB1/4-5,5,4-3,5/50.4.2.1-0../+3+7-:.>02$7,<3tqrj}bt]pRjBb6`5a8_KfN[z;6Y?.LH/TZ@]cIbzJjTr[v^yc{dxas\pYpYqZqZt\u]y_z`x_y^z^y\xWvUwV{X~]dhlormxgrlk}ecu]_O?_O?_O?_O?_O?_O?_O?_O?^N>^N>^N>^N>^N>^N>^N>^N>eQ6cR8aP<]P@ZPG\TR_Zab^otryx~~yxwvxwt}w}Ƃƅȸп¡ϼDzkS\FG5=0H=VQVTNO?A=?<<<;=:=5;18.82<5:3>5PDYM]PgXdWM@:-8.913-2,50402-5-<3C7C4:-3%5*-&0+.,2144.,00EIY]W\puDJHN=C[aou>C~mqQT>@02<>EI9>7==F6@-8>J\hmwitdl]g^kap]nWh_YOKJG740.54/.95D?JDJA@86/5-7194$0/<1=*6/:>E>C443.5.6-5,3*3,4/5/.4.2.1-0...+2+6-9-@21$6,7/pokcx]pZnPiAd7a8d=bPiQW^2'RG3DH/PV`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`P@eS;aP<_O?^QH[QOZSZeapsqxxz|~}xyrsnoqwv{̋ȖäŲͭЩУѠѡ̚Ɣզg_FzgteG?QMbaIL>A799;997561949550B;=5I?XKPAeVdVYKG;:/6-6/5/3//-2,70=4<08)5(8*/$/(.)0-204051408X`~~owgoipfj\_Y[^`RYCK8B7A1>+9/>=IS_`kgpepbobp`o[lTOFA853110/.2186D=B:?7<4908183845=4;3;4<5;49331/3,6-7.5+3+2,1,2./503/2.1///,3,7.@49,7+/&<5XW~he|]rRhHeAe9b5`JlRd==K. >>&?I.IO5]]EWlAcxMqZxby`t\rXqWlSmRnSoVrXt\u]u]tVtWvXwWvUvUuTtS{[{\z\uZnUc}MXrCSj>AW1?U/`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVF_QD\OF_TRcZ_f`nmkwvwy{}}x|qtlolnoqsu|}ىԘШƹƵϩףܞߞޝܞ٠ҜʖѼ~dċw}mVJ`YqnZZJL>@<>>@:;5634=:73?86.>3L@I;^Op`aSH<5)0&5-4-/)4395<7<38.5)5(5*6.4-1+0+0,2,4.5.9;>AIMW[\d\d]e`kR]MXQ[_gjqfl[`RU07+5+5-9&5/'67DP\[dclemepdo[hP^FB<9646353202/62>9>7<2:1918295969;7:7:797957313,4,7-7.6,2+1*0,1.0503/2.1///,3,6.=2>28-2*82Z[w{a{^vWqOkFf=b:c=cLhJVw<8F5#7=#9C(DH/UP`rJnXw_v]tZpVnTkOkPlQmRoVrZs[s[tVuWuWuUtTrQqPqQnPlNhLbFXu?Nh8F]/@W+@W-@W-AX.YL<[N>^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^QAbUM^QK[QPcYakesqmvuy{y{y~w}nseibfjnrv}zᇃᖔߩټظۤϠĘkpp`RG]Umius^_HL@D@D=@7:36>;;6A:707.?3=/G8j\j[\MB62(4+6-1*44A>GC=62)1'2'0%3*1).)/)2,7/=4A7-,43CEVX^bYaS]P[FQHSNY\fmvmtY_AG*2,41<1>*9&66EJXISOYW__fdkaiQ[BJ956375<8<9855160:3;290908183:6:8;9:999988884403+6,8-8,6,3)/)/,0.151302.1//0,3,6.9/D99/4.0,`bnu_zWsPmLlDf8_9_GfReDJi=4K@,7@%8@(ED/LE2N^9YkEg|Qr[tZqUmRkMiKhKiLkPmToUpXqZuWuWtUrTpRmMkKjLdGaE\~AUt;Li3E_/AX*>U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB]P@YNR[PVbXcjcsqmvuxzz|w|symrbi]caglrv|ȋ攑褡淴޿ܨҧßvqsecWi`rmut[[KNCG?D;?8=:8;8D?C;:0;/7)2#J;bRk]SG9.3)5+4+33ML[XKF803*4+2(-&,%,%,'0)6-<0?20(4,:6CBFHEKGPLVQ]VbXd[ggpmuY_=C.2-4-4*4%2(6@?<;857292:1908071738687<9;9:7;8:8845.4+7,8-8,7*3)/)/)/+252312/1//0,3,6.8.G<903.-*fjyjr`{TqKkFj=c3[<^PhXeDBbE7WP=DH1@D-JH3JB/IW4Sc?btLmUpXoRkNiKgIgIhKjMkPmToWpYtVsUqSnQjLgIeHdG`D]AWy=Rq8Mi6Lf6Ne7Pe:Lf6Oi9Sm=UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB_RBTLY`Xgnf{tpxtxwxzy{syjq`g\b`fkqv|~Ε䞞譭齼߳سѴůy}qwkskngoi扄~sredVYLNCE>A95:7B=E?<3=3B51%1"I;YKN@=/8*6*3'34UUkh]XE>;3;2804-1,1+0)/'0$/$0#9,4'3):5CAEGBG@HDOOZVaVa^igoYaDI885526183;9CHSVa6?4;7;AFKOIM;@056195;8;9;9:77370;2;1;2:282736465<8;8;8:9;7956/4,8-9,9-7*3)0'/)0+453322010/1,3,6.7.D:7/1-21jprzhr]vPmCf_L;_ZFQP;KI4PI6MB0DR1M[8[kFf|NmSmPlMhHfGgHgIiLjOlSnVoXtVqUnPjLfIcFaF_DZ@X|?St;Pn8Pj:Tk=XmB[pEUp=Vq>Wr?RE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEdWG]Ulje|yu}yzywyvxswlqcj[c]ehpw}ǁІՙܡ௲廿Źxzuwvqulg~mfoib[a[smzu{|yrpccSTHHB=>:<6A;:1D:TJ>26):,=.?/A3C5?18*23LM_]XSD?;48170929292929/9.9+8))3"@2I>E>;:7;9@8AHTUaYb^g`iU[CI?:?;AAGJMRQYT]V^4:/5037:=A:?48/2619595411/20404.<4=4=3;293734333:898888987754/4+7-9,9-7*2(0&0(0*454332111/1,3,5.90<3700-AAnukucoSkIf;c1`3bRJ7QF4MB0AL.GU4Sc>`rHgMjMjKhGeFfGfHgJiNkRlUmVqSoQjNgKcH`E_F_G\E[~DWxAVr?Uo?YpB]rG_tKYtAYtAXs@NB2QE5UI9WK;XL\P@^RBaUEbVFbVFaUE_SCaUEfZJj^Nkgup|x{ywxvwptjoah^f_gempx~͉؏ܙϠ֪۴ߺ߾̼ƻŴqqstpqogevhenj`Ye_[Tg`tn{v{wwshf[ZQKGB=6C=;4G=\R;0<07+6(>.D3C2A1A08:>@DCC@=8917/7/:393:3;3>5A5E6G8.;%K8L==30+108>BJKVU`Ze]eYaLR?D4+8/<7@@DFEJBI?F5;26368<7914-2.44095640.,*/,2.2-=5=4>4<3:58565555757575656422.1*7.:-:+8*3(1&1(1*555342111/1,3,5.;24+;420UVpxcn[gKbEf7b+]1b@hKeRYd8/ZI7SN:UN;[P>VI8M@0MA1=H*CN.K[6Xj@ayGfHhIgFeDcBcEeHgLhOiRjTnPlNhLdJbH_F_H`H_H_H]~I]yH]wH`wKcxOdyP[vA[vAZu@MA1PD4SG7VJ:WK;YM=[O?]QAcWGdXHdXHbVFaUEcWGj^NpdTvqyuxvtsrrsulpbgZa^femltu}ƁЍڕ⚤ȟͦԬٰ۱ڲڵ۳ֲѮ˫Ī¦{|ydbgidhbY\g[[xeauXRe]OHVOaYjcvp}zwuljZUPJD>MGB9F>WO,"2'5'=0E6>-2!8%F4DF9;3262;6<7<6<6;4825.4+5+8+<.>/U;I/=';+=2;56537KRLVOYS]WaU\LSCG5)8-816455584:288<6;9=853cepy\hR_HaGh:e*]/a@hE]AFQ-!UJ8PN9OH5\O>YH8L<-NB2:D)?J*GU2Rd:]sBcEfGeDcBa@aCcFeJfMgPhRlPkOfLcIaG_H_H`I\G]H]~I`|Ka{Ld{Of{Rg|S]xC^yD_zEAC8CE:IF=OH@RGAWI@]M>`O=aQ:aS9`T>_VGaZTfaeljwrowozt~wzurohfa`^^bahgqo|xυڏ㗐흖٣ڥܦݧݦۥڦ٥֣ҢС͞ɗymrvghlc_`e[ZlYUtUPULVKRGZNZP\Smd|t~xyyyabPQEEYV611(5(7&6%8%9':+<.?18+=/?1;-5'4&:.?590907.7+7);)@+C,;3?7DC;<42*,$>5G>QHXO[RYPPGE<)<*6.648;;94:5<4;5:593736225445464717.6,6)9*:(:&9&8%8%7#7#414/4.3.4,5)6(8*:.7/96>BlyasRlGdIj5Y5];e=cPjLVT)":1 9<)EF4RL>PH;BC39E15K4FGHJ#MQ,U\:\jGcuOf}QeNcHbBa>c@eDjIlNmQjIiFgFfFfHfIcIcGdJdIc~Gc~GdFfFe~Dc|BX}8[;^>[K>^M;`O;`Q:^S?^WGa\Vhcinlyrqtnvptppmgfaa]^\\edkjtr}{φَ蘒웗Ҝӝ֞ם֝՜ҝўќ͜ʛǙēwtmtkdkf]`e[YiZSoWMzVJVIUK\RYRXRf_qjvowuufdTSYU2+/%7)7&7%8%9&:*;-=/8,9,:,:,9+9+8+8,;1908.8,8*:(;&;%4-80=5@8A9?7<4915->6H@OGQINFC;7/89"8)4,./*3(7(:+B*B)A&A$@ >=<89$;);-9297;;;94:5;6;5:593736225365464717.5,6)9*:(:&9&9%8%7#7#4-3-4,4*4*5(6)7*c@eDiHkMlPlIjGhGfFfHfIdJdHeKdIcHdHeGeGfEd}C\<_?bB69.:<1??7E@:KB=OE/>/6(/":.7-7,8,9+:)9&8#4*6,8.:0=3@6A7B8;1@6E;FG=@68.6!7&7,3/03,5*9*<'='=%=#;!:87766#8*;1<6=9;;:86:5;6;5:585736226475565616/5,5(9)9)9'8%8%7$7$7$4+4)4*5(6(7&7'8)=12+98lt]nPi=[Jl5\=e4[<`Tq?Oa#(H1+79+-8'18&:;)B=*A<(@>)@B*?GY`4s~Tfwbi~Ub|MaI`C`?a>c@hEjJkMlPnKkHhGgGgIhKfKfJeKeJcHeGfHfGeFcDbBeEhH06*58-;<4A>9G@:KB;RE.?.8(/!6)5)4(6)9+<+=*;(9/9/9/9/:0;1<2=3E;E;B8=3=3A7A7=34#6)5.31/5+6(7)<&9&;&;'<&<%<$:#:!7"7%7-95>:?9:8786:5;6;59585655427376665726/5,5(8*8(9&8&7$7$6#6#6'7(8'9(9(:(:':+;/3.IKo{VjDa=_Ci/[7`=cLlOe0=G >3--3'+8'2=,=B.B@+C;$G="MA'R_*q}Mp|mjW_{J]~E_Ca@b?fCkHlLmQmSoLlIiHhHhJiLhMiMfLdJdGeHfHhIfEeDfFiIlL-3'17-7:3<;6B=9G?UOCZUQa_dhgukklljgbaXVPPQQXY`cfjorux|Ѓֆ׉؊׌،̋ˊ͉ЉшъӉЌϋȍ}xvpScQ\qUT`^RVcOTbH_]DvUBLBRRPWPY\dejljwqvlph~v{~ka?28(;(='='=';':'8(8)8/7.8,9+;+;*:)7(9+7+8,7+7*8*<,>-=0<0<0;/:.8,7+5*@5@5=28.8.;1:06,.$0)2.23/8-9+;+>-?.?0@/@/A.?-?->)9)8*70:6=9=775386:5;6:79585655438485676746/6,5*9*9*9(9&9&8&7$7$9%:&<'=(=(=(>*=.8-;8^eaqPi;\Ai6a/].WIjYq>NX'-?+,730*1)-9-5@/:B+<<"B;VG(iV6vPlwo[aK^F`BcBeBjGoLpPoSoUoLlKiHgGiJiLiNhNfJeIdHfIgIhHgGfFgIiKlN*2%.4*470894<;7B=:HA;KD(>(=(;(;)9)8*3+6-:.:,:)9';)=,>.@2A4=17*4&8)<,:,:,;-;-;-9+6)5(6*;/>2>3?4>37,.#)%-*02290;/>/?0A0@1@2@0=/:-9,8*7/&?'A(A*@,=.71IKgrOdHf7]Am/_1^1XOjWfh39@*,?994443524925>-2<#29ECl`8}RuΗȕ}vbeQ_F`Bc@gDoJrOrRqUpVoLlKhGfFhIiLiNiOgKfJeIfIhIjJiGgEhJkMnP(0#*2'/4-350664<87@<9C>8IE3>0>0@/?.$?%A(@*>-;1:6U\_oGc>b8c6g0c4\CbMaBIL44:97<<>948>58<7379+3="8DS[,PoȈˎ̒Í}{ggQ^E^@c@iDoJsPsSqUoUnMkJgGeEgHhKiNiNfLdIdIgHiJjIiFhEiKlNoQ&.!(0%-2+130333756:97>;6GD=DD*<'8$5#B2OAN@B47)7)>/;+:*8(6'6'6(8*8+;.;/9-5*7,;1<29/7:8=:A8B4A.>,;,:/;19385857483645496;9<69453386;986979899896967465:5:7:7985827/7+8+9+:*;*:*:*:(9(: : =$?%@(@+=.81hCoJrOrRpTnToMkIgFeFfGhKiNiNfKeJdGeHgHhGhGfDjLmOpR(0!'/"(-&+-*.0/333775:94==5?@8DE?JLKQQYVWiZ\s]^|YW[Y^]eennwxڄ䊌솇䂂܀ԂӃҀāǃɄΆ҈Ջ֌ҊNJ~xwpxkeec^XpZMm[Mi\Kf^Kd_IcaHfbGl`FlR;UA^OaYYXPTQ[XbkcYRD<707/;//@/@-=*9'9)0"VJJ?.#=12<07,7->4E;AF8?3:4?2>-;,:2=7@5;687899:98665==<<:<8977767575979899::9;9<9<8<6;5:7:9::9;5907,7+9):):):):);*;)9!>%;#5:$E3@60.^eVgHc;\0X/[5cc?iDnImLlNkQjRjHfDcBcDfGhKgLdJgMhNgKfHeEfEjImJpSrUtW*0")/#).'+-(-/.222553782;<4>@5BC;HJGOPTSUaXYm[[s\Z^]dakjus}Їዋ퍌텄 ڀ~ҀσυƆȇˉ΋ьЍΎɊ{x{stknkd^e\SbaLb`Ke^Kh]Ii\Ij^Hk_Gm_EraG{]C[F[LWPQSPXS`WQKF>9505/908,8*8&8&8&8)7)5,3,2,1'4)9+=-A/@-=*9(9)<.QEH<4(:-:,5&=+=+;*;*:)8)7)6(7*8,7,3)1'1(7.=4BH7>07/:0;.;1<6?6<3632:8EBJFEA?<:9:89796858598988788999:9;9<8=7<5:596888:8:5917-8*:*:*;*;*<+<+<+9"?);$5;'>];2@>/3A05?4E=:X;?T-0X51ZI7bjEu[p||}yr`YuESq?\{B_>b>iCmFlKkMhMhQhFeDcBcDgHiLhNgMiOiMiKgGgGfGjImLnQoRrU-1"-1#,/&,.).0-11/34/45-9;0<>1@B5EH?KMLQRWUTbXWi\Yx^]fcpmzxύᐏ퐎釃~|}ȁ}DžĈƊʌˌˌnj|v{pujpod`i_Ue\MXeK]bKa_Jh[HmZIp[Hq\Go]EtcItZ?V=WDYMTSNTIU@<<984616/6.6+7(6&8&8&8'6)5,3,1,5(6(9)<+@-@-=+8(5'J=E:A57@=C7;AANKZUZURLB>62727474748596;8::7788898;9<8<7<7<38475777:7:48/7,8+:+;+<+<+<+<+<+9$@*9$7$;+2%40OTZiH`8U6V>]FfHfEat?9e?6QA2@C04?.29)>5,O61K*#W:,j\B_t{yv|m\uKHa7Nh9[xB_}?c?hBlEjGhJgLeMeCdCcBeFhIjNkOjNkOkOiMhJgHiHlIpMsVtWvY25$13&02'01+12-23.34.46+9;-;>-?B1DF9IJBNNNRQWTR]XVd\Zoda~nlzwČؑ唑쓏펋扅ڂ{}}Ë}{vzm~sfmoa`k^Vi[NgZJVdJZbJa_JjZJpYIsYJtZIs]FqY?tU9T;ZF\PRNEG:A3/4151505.4+6)8)7$8$8&9'6)5*3,2,8+7)7(:*=->/;-8+3)TK;38.A64'<->-7&8'9(:)8)7)6(3'5*3)2)4,:3>7?9>847596;5;2:397=<@UVc`njidVQA<613/71717182859697::78898;9<8<8<8<8<48686787;7<49/8.9,;,;+<+<+<+;*;*:'@,8&9';-+"54_gSdE];U1B2SE*okHfttqt}l\K_:BV1Lc7Yq?_{@d@iAkDiFgIdJbLcBcBdCgHjMkOmQnRjPjNjLiJgGiGmKqMuYvZx\78(78*66,56056156167/68+;>-=@+@C.DG4IK=NNFQPNSQTVUSYY[a_lkius}Ȍ֕㔐䐍ދӄƁ}|{~zxsznzrfjm_\j[Tk[NjZKjYI^bK_aKe^Kk[KpZLtZKw\Kz[G{WAS=U?XFSFF?76012-3/5/4.2*2'5(9(7$9$:$:'8)7*5,3,>-:)6%8';+=.;.6,80\T=54+A53$:(@-9):*:+:,;-:-8-7-3*1)1+71;7>:;77477;<7=7=69797:::=:=7;2;/9*;*<*<)=)<(<(<(:(=*9':*9-0)AAgrL^E[BYF[N^T]VWSQSU@LN9JG4JE1FD-AA'>C#@G%MU.^g,?=.==1==5=<7;<6;=2;=/?B-@D+CG,GI1KM8NOASPITQLYXDZ[M_^Zgepqo{yƏӏՍъǃ~zzw{uzw|y|~~y|tzrvkqrffm`Zl[QlZNl[KmZKmZIg^Mi]Mi]Mj]Mn]Ms^My^M[I`OWGN@I=@56.0)0*515/4/4-2)3'6&;(9$;$<$<':)9*7,5,A.;(6#5#:)=.;/6->7ZTHA90@36&4 >)7'7'7'7(7)7*7,8-<3:293<7>:=9854196<9::8:>@ORccqpheUP=82+5.;7<::9<3:2:4837365556869697;8<8>7=7=6<8:8;8:;:>:>7<2+>467>O#Jh4gTt\cdfltxpn}\Q`C=J09F,BO3O_;Xi=czDgBkDkDhFeF`G`GfCiFjKlMlOkOmQlRmQmQmPlLkJmJrOuQy]y]x\CB0DB3DB6EB9CC;CC;BB8AD3CG0EH-GJ-JM0OO7RQ?TREURI[\:\\@\]Kaa_ihvrq{z~È{ystpqmolrntqwrwrtoskxrilmb^l_Vj\OlZLn[Lo\Kq\Kq\KrZNq[Nn\Nl_Ol`PqaQy_N[K_SOEA8:25-1(1(5*706/4-3*4(5(6%9#;"<$>$>'<';*9,8,D/<(5!4!9(<.9/5-83NISMB9B5@.2?(;,9+8*6)7+9.;1;3D=A;=;;:8877939584;:JJ\[dcca=9824.81B=E@=;42;3;3928484667777696;6;8<8>7=7=6<686989;9>9>6<1<.8););(;';&;%:'9&?-7%=,:)3'QKkm\fN^I\HWJUSS]RfQjP=Sg{FhClEkDiGcFaG^GiFlImNnOlOjNkOkQpTpSpRoPoNqNvRwUz^z^y]GD3HE6HF9HE613/5/5+7*8)6/4-3,4*6*7'7%7 <">">$?'>'<*:,9,E/='33 8';.9/5./*?;YTI@D7I75D,F7D5A3?2?3B7F9;77464657799>7:473<:IHML=;(%-(5/@9C=A;=8>;?>:2:292849596999:7:6;7<8<8>7=6<7<595878:8<7<4<0:-8(:(;';&:':&:&9%?,4">,:*1&\Xy|T_TbI[DRGOSPbSlS{rSC[C?H3B7%O6"_K0prJiǀyt{qu]oHy}JXy|O\d5:D)3=$4>&WN?XO@YPAZQB\SD]TE]TEcZKbYJbXNcXRg\Zmacsfmwjs|n{~p}ss~p}wjtobli\fcb]a`[a^W_\U_[R^ZOa[ObZMe\Kg\Ji\Ii]Gk\El]Fm]Dm]D_gOkiTqZH{M@RIWLTIWHN:G2?*;(:.7223,17.7.7.8.8.7-6+6+7+7+7+7+8+8+8+8+=.=.8(2!2!;*>/:,6+6-:2B8I>G9;,1!OGIAE=E;H?G@C><:54678:9:7772:3>5KAE;=07)5&8)>.A2;/<2>5=8;97967687>7>7<8:9997:5:35.6/818497989:9:;>9;99<,<*;(:'9&8%F2>//%-(IKkolqWZOPTQVOYP[P]R^V`XMb!:O3JOf xIhrtpakN\lEWdHS\GHN@=C9;<,AB4=?2:=2,:)9,7042226-7.8.8.7-8-7,7+7+7+7+8+8+8+8+9+>/=.9(2 3 :)=.;,:-4*3+;0E:PBRCQAE@@;<6;5>7=89633696879687797=9?:C9?2:,6'5&8)=-@1A4A4@7=8976756686<6<7:89879795:392:3:3;6:8:899999;:=<=?=@;?6<2;-;+<,=+<);(:&8&7%z;)8)5*;5QPce]aMMNLSOYP\R^S^U_V^VSg*Sg(^r3zOlzn`jFau@Sf9IY5FP7?H59?358/;<,AB4=?2:=2;A5:C2@M3Rc?]uCgHqLpJmHkJkLhKmTnToSmQkLjHlHmHpJnJpLsOuTxXxXxZm\bQYH]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXIe]He]Jd[Jd[Le[Qf[Uh]Yh\\i]]j^`k_ak__i]]f[YbWU`USYVMWTKTQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`Jk`J^cOmhUy_PXN[TVQHEE>@7>3<-9*8+9.:/;17-7-7-8.8-7,8,7+7+7+7+8+8+8+9+9+@1>.9(2 3:&=,=.?07+2(3(<0F9M?QB87432052:7>;=<;<8<5:27245697<8=8;-9+6'4%5%8(<+=.D7C6B8=7966455675:6:69797795:3:3:3;4<6<6;8:999889:;<@>A=>7:17+7(;,=+=*<(;(9&8%7$u8%y6%9,E=ROVTOOHHLHSLZO^SbUaW_V]UgxB{UnzzYYp:?R$AS)AQ-?L0:C.6<.690581:;+@A3=?29<1;A59B1@M3Qb>_wEiJsNrLoJmLmNkNpVqUoSnPlKkIlHmIpJpJpLuSxXy[uWqU_NVEOx>aXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Le]Ff^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh^Uh^Ug]Se[QdZNdZN]YNZVKVRFRNBPL@PM>RO@UO?WQAYTA[VC^WDaZGd]Jf`JgaKadSleUt]O[Qb\YXDD9:;8:6808-8):*@.C17*7*8+8+8+8*8*8)8)8)8)8)8)9)9)9)A2>.9'4 28"=)@.>/9+6*4*7+;.02614023488;<=?;?6<38/505477764307(6'6&7&7&9':):*A3A4A7?8:78576676:6:68768694:4;492:2:4;7:8989789<:@3B%:F.=F3;A3:=2;<4<=79:*?@2<>19<1:@49B1?L2Pa=`xFjKtOsMqLoNoPmPpTqUpRoPmLlJnJoKqMrNtSyX|]w[mSdJ[LS|DNw?cZKcZKcZKcZKcZKcZKcZKcZKcZKcZKd[Ld[Le\Mf]Nf]Nf]Nf_Eg`Fh`IiaLiaNi`Oh_Ng^OjaRi`Qi`Qh_Nh`Mh`Mh`KiaLb_P^[LYVGTQBPM>NKTQ>VS@YVC\YF^[H^]I`aSf^QmWJ[Rhcb`LM@C:<7974709+>)D+H-7)7)8*9+9+9*9*8)8)8)8)9)9)9)9)9)A2>.:(7"57 >&B-<*;*:,8-8.:.<0>25<3:2736464646155:39385:8:662/,(9(:(:(:(:(:(9&7&:+<-?3?7=8:68687566666748493:3;3:2;2=5=9=:><=;==A6:;3::29:*>?1;=08;09?38A0>K1Pa=ayGkLuPtNrMqPqRoRrSrSrQpOmKmIpLrOtQvSxY{^z_qVdJY?]NVGQzBe\Me\Me\Me\Me\Me\Me\Me\Me\Mf]Nf]Nf]Ng^Og^Oh_Ph_Pg`Fh`IiaJjbMjbMjbOjbOjbOjbOiaNh`Kh`Ih`IhaGibHjcGe`Mb]J^XHXRBSM=MJ9KH7IH6KJ8LK9LM;NO=PQ?QTASVESVEYYM]WKcQEzXNhaeaUUOR=C8>6762:.@+E*I*7(7(8)9*9*9*9*8)8)9)9)9)9)9)9):)@4=/<+:$76<#B*C.@/;,7*2(4+:2@81<2<5=8>:>;>:=9<485:8<;>;<861--'<+=,>*>*=)<(:'8%6%7);.=3<5;7;8;77575758494;4;4=4>5?7A:A;A>A?????B:@8<38-5(5'8(<*;*<)<(:&9'7%6$5#y<)r3!}:*OAYLRGOEVJZN[M[M[O\Q^T`Ya[s}Xy`r|ZU`B9F,/;'0;+1;03=44;35<4:?8?B9?A6<<277+89)>?1:27@/=J0O`HO?HO?PPDVRGYOChREYMULRLXWGJ:A?CBCAC@A>?1256::<;;7734.3+>+>+>+?,>+>(<';'7$7'8+8.8.92<7?;85858494:4;4=4>4A7C9C3:/8+6(7'8):);(=)=*<):'9&7&6%~5$v4$x5%B2UEXKQCPDZLZM[N]O\Q\R\U[V\W`hCX_=JS4>G,6?*2=-4>35?74=88>:=B/;9*78(=>0:26?.=J0N_;`xFkLuPuOsNrQrSpSqMrNqMpLoKrNuRyX`~az]qUfL_G[E\HbRYISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmcWlbVjaRi`Qh_Pg^Og^Mh_NiaNiaLiaLiaJh`IhaGhaGhaGh`Kg_Je_Ib[H\WCUR?PM:ML:EF4DG6DH7BI9BI9BJ;BJ;BJ;JJ@QQERPAUNYSQOCE8:55:3>/>)<$8'8'9(;*;*;*;*;*:):):):):):):):)=2:.<,>+9#59@':$<)?0;18.7/<5A;;B>FBGCE@?;7501.0,51:5<6:29.9,9,>+>+?,@-@-A+>*=*<(:(7(5)4*80?8D>:5:5;4;4<4=4?4@5C9D:C;A9?:;685739-7*5'6':)<*:)9&=*=+=*<)~:'|7'{6&{6&y1#8*G8REPBK?SE_SXKZN\R]T\V[VYTXSV^7EM(6@8A&>G27@E>GJ?GI;BC1?>);;#78(=>09;.69.8>26?.E5>F7?G8=H8AE4HK6YS;_F0K9j]f`SSDE@@?==5=0>/3$5&6'7(7(8);,=.<-<-<-<-;,;,;,;,3,7.;-;)8"78:"B-<+7)4*6/<7C?HCBGDHCC:661808.5+:/9.8.8-9,:+<+>-=*=*>+?,@-A.B-@-<*:(7(6)6+8-;1=4:4<6?6@7A7A6@4@5G=E;A6;26.3-1,1+;-:,:+:*:);)<+=+~:'|9(|9({:({:(z9'x6&w4$z, A4NCMAL>REVHRG\R\RUMTLZUXSWR`^R[0IQ(AK&BK,>H/7@-2=-4>34;3HPEX^RW[LLO?1;=0:=29?34=,;H.Pa=bzHlMuPsMqLpOrSqTpJqKrLrNsPvU{\bfx^iO_G]G`JfOhRdU[LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^^j_]j_]j_[j_Yj`Wj`Vj`Vj`TjaRjaRjaRjaRjaRjaRjaRj_Kh`Kg_Jg_Jd]J^YEUR?ONE5?E7>F7>F7=E6BF8>E5=F1DN5HK0PB'yS>@=>982:+<-=.<.;-:,9+9+:,:,:,:,:,:,:,:,?9A:A7=/6#2235#7(;0A8E?IDJFJGBCEDC@;59/>1A1?.@1@0>0?/?-?.A.B.;*;*<+=,?+?+?,>+@.=-:,9*8+8-:0:190;2>5A7C7D7D9E8B6A4=1:08-5.5,5.=,=,;,;+:*;*<,=,~;*|;)y:)y:)x9(w8'u6't5&1)C9NCK?J>PDTIRGSJWQUOUR\XWTSO\XT]0Zc8_j@[eBIT66C)4@*0:-;H.Pa=c{IlMuPtNqLqPrSqTqKpLpJqMtQxW|_c{aoUcJ]FaJeNeNcLdU[LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^`j^`j^^j_]j_[j_Yj`Wj`Vj`Vj`Tj`Tj`Tj`Tj`Vj`Vj`VlaMk`LiaLiaNf_La\I[VCTQ@ML:HI9DG6AE6AE6?E7>D6=C5=F57@-?H3EM5AA%QA']Eu`WHbZebRSEFFHBD799+:,:,:,:,8+6)6)8+7+7+7+7+8,8,7,3/5/5-3(0"01 4$A2C7G?KFLGJFFBC?CCDA@:;1=/C1F4G3E3E2C2B0B0B/{B.xD.8*9+:);*<+<+=,<*?.=-;+9*8+9-:/;/7.90;0>3?3@4@3A4:,:,9+7+7+7,8.91=-<,<+;,:+;+<+<,};+z;*z;,w9*v8)u7(t6's5&91FMKB3;I27C-EJ3IG0K<%mN9dO`NA5SLc_^^RUJMDH>C;/9-7+7+9-:/;0;0>4>4>4>4?5?5?5?5?=B>D>F=GN@PDSJOGLGIEFCC?A=@.D2H3J6G4F3D3C1B0zA.wC.uB/8+9+9+:,:,;-;+;+:+:)8)8*9,<-=/>09/8.9/:.:.:,9+8*7)7*7(6*7+8-9/;0=.<-;,9*:+~9*}:*};-|:,z;,y;,w9,s8*q6(q7)q7)B8G=K?HB'=A&;>#78(:;-79,9<1;A57@/MKH/JH1Q?+e>-ZL`S>64+@9XUigdeRUINKQJ@F<@6>4@6D:G=G>JAJAJBJBKCJCKDKDRTSTTPSMSLSLTNUNLHHFEBB@B@B@EBEBJHD@>7>2A2C1F3I6F3D3C3@0@1}?0y@/x@19.9.:.:.;/;-;-;-9*9*9+9,:+;-<.=/;/:/9-:.9,8*8*8*8)8)8(8)9*:,:-;-;-:,9+~9*}8)}7+|8+{9+z8*y9-x:-t9+q5*o5)q7+r:-G;HJY.AR&IZ0Wi?dvLj|TXjDL\8?M,:D)C-=@-:=*89):;-68+8;0H-NC-b=-D:VPMJ++:9=;TPpnwvehY^]cVOOHG@CA=JIB@<6>3@3A2B0D3A2@2>1=1<2<1=1}=1:3;3;1;1<1<1=/=/=/.9)9*:*;+;,;+;,;+:,9+7)~6*{5){5)z6)z6+x6*x8,w9.s7,o5)o5)r:-u=0L>K>JG*SA+{E9NLEH5<19@E?@JIb`rpopbeZ^RJLDD=B;D=E>CC?C?D@EAEA?D@DDFFHIHJIIIFHACADAEACAA@>>:=8EG=<73;4@4?1>0A1=/<0;1928193:4;4:4:4<3<3<3}=3}=3|<0{=0{=0{=.{<-z;,y:+z8*z8*:0:.:-:.:.;.<.=-9):):*;*;+;,<+}<*8,8,~6*}5)|4(z4(z4*y5*u3'v6,v8-r6+n4(n5*s:/v@4PBN?N=R@VFXIUJRINIRPSO\VfZl\LML7BL3@O.KZ9WgC`rJezOdzLVl=G]/AV+7I#0A!5C*=F5QJ:MG7IC3GA13M*>G*[B.PGVV7?'3BN:C9>;:HG][gf[]ILJDF@C=C>GBGBB>=9C?B?C@DADBECECFD>C?DBEEGGGFFBC=AAD>C;A<>>>A?D@FA@C7830:4?4>1=/?2;.9.8061717384:5:3:3:3~;3|<3|<2{=2{=2u9.v;-w<.w<.x=-x=-y;,y;,{;1};/~8,7*6)5'6(5&7(8(:);)<+<,~=+{<*8,7+~6*|4(|4({2)y3)y5*t1(u5+v8-r6+n4)n5*t;0xB6TEQ@P>UBYHYISGNGSNRPPKVObUeZHFK4;K0IX;[jKgxVewQYnCSi;Me5I`28M"-B*;2@):E7;B;8<;7;<<=-<=/79,9<1=C77@/6C)DU1Rj8_{@mHpJqLrQtUrUqQtVuYsYmSdN\HZDdNaJ`HcIfJiIeDa>`PWyGPr@i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTo\Nq_QtdUrdWnbTj`Th`ShbTgaSebQa^K[VBVQ;TN6NH.GA'RD)N=#cI2iVzmng[WPQBE@E@GBFDGEIGIGIBEBEBDEEDBC;D:H;F7H9H:G?EBBD?F=EBDBDBDDEDEEDEDEDDAC@B?@>?=?=?=@>E??8:280:0>4@3?2A4|@5}?4<3:3837372<-<-<-;,;-:,:,:,9-9-9-~:/~:/~:/~:/~:/~80~80}90}90}90}90|90|90|90|90z:0y9/y9/x8.w9.w9.w8/w8/v7.t8.s7-r6,q5+p6+l2'q7,m4)l3(o6+m4)q8-H=ULTLQKPJNJNLNMPLSMUK\NdOkaFTW8JX5N_;gT`zMWpFTkARg@O`0CA4B@4@<12:/2:/4:.5;-9=.A,>D*T^4E9F9G=G>GDCEAE?GCDCDCDDEDEFDFDFDEAC@B?A>A=A=@=A>FAB<=6:090;/=0=0A4|@5}?4<3:3917172<-<-;,;,;-:,:,:,9-9-9-~:/~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/x:/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H2><03;03;05;/6<09=/A,>D*Q[9^mDmPpRrSqRsSsRxa|exakT`I]F]F\E`IaJcLeNdMbK`I^G]MRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtbTo_Pm]Pm_ToeYog\keYhbVfbVpl`{xi~{jzgzuapiVf`JPVG@GCFFEFDGCDCDCDCDDEECECECDBE@D?C>C=C=B=B=F@E=C:>5:/8-9,<-A2~@3}?2=1:1918180<-;,;,;,:,:,:,:.9-9-9-~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*k1&o6+m4)k2'n5*i3'm7+}G;QIPIQJQLRMRNTPUPVO[P^OtbNoiQnrWjwYfwWPf@K_:EY6BV3EV6GV7FU8ER8?I1*7;*:<.<>0<=/:;-5<45<46<26<09=/<>0=@-=C)MV7Zi@h|KlNpOqRuStSzcw`nWcL\E\E\EZC_HaJbKdMcLaJ_H]F[}KPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtdWqaTm_Rk_SkaWlcZle[jf]jf]wuiy|rygZfNLV>AI2CF1ED0D?,I=-TD5M:+O8*R6*T7)X8+];/a?3eA5KASLUQNKEDABCCEF?>@=B>D@EAFDEDEDCDCDDDDDDDEDEBGCFBE?E>E>D=D=E=E=C@8;/8,9+;.@2@1~?0=/;/:/9/90;,;,;-:,:,:,9+9-9-9-~:/~:/~:/~:/~:/~:/}90|90|90{8/{8/{8/y9/x8.{;1y;0y;0y;0x:/x:/v:/v:/s7-s7-s7-r6,p6+o5*o5*n4)j1&o6+l3(h2&k5)h2&l6*|F:OGPHQIRMSNUPWPYQ]RaUy_PiZGd_IciOZgKN]@EU8AQ4=M0G2:A/7>,9=,9=.8<-7;,6=66=66;46<29<1;=/dxGjLpOsTwUwT{dr[eN\EZC\E\EZC_H`IaJbKaJ`I^G]FY{INp>Ef7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTseXugZsg[mcYjaXle]snhzwp~wv~i`hSLSADK9AJ7>G4>G4BI7GNB?@AAC@EAEAEAEADFDFDFDDEDEDEDEAFBFAF>E=F=F=F=G>@9B;D=B9>3:-;.=/?0?/~?0=/<-:-:-:.;-;-:,:,:,9+9-9-9-~:/~:/~:/~:/}:1}:1}:1|90|90|90{8/y9/x8.x8.v8-y;0y;0x:/v:/v:/u9.u9.u9.s7/r6.q6.p5-o4,n3+m4+m4+j1(o6-j4*h2(j4*g1'k5+zF;MGNHPJSLUOWPZPZQ{YMv\OkZJ]UBYXDY^HOYA>L3;G18D.5A+5A+8D.=I3AM7EN;BK8?H5.5<,4;+5;75<56;56;48;2:-;@)GP1Ra:buGiKqPuVyWxUzcnW`IZ}C[~D^G^G]F`IaJbKbKaJ`I_H^GW{KLp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTmaUndXpf\lcZkd\rmg|ľtfcTPQAEI8=F38E18G45F35F44E36D58D6;E:?G<@H=<6(L0=/=.>/?/>.=-<-;,;,;-:,:,:,:,9+9-9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.v7.u9/u9/u9/s9.s9.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*l3*h2(l6,i3)f2'h4)e1&i5*xD9KEMFPJTLVOXNYO|\Os\Nk[L_XFUTBPS@JQ?@I64@,3<+2;*09(09(2;*5>-9B1-;@*CL/O^7_rDiMrSwXyWvUs\fOZ}CX{A\E]F]F^G`I`I`I`I`I_H^G]FVzLJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTiaVjbWkdZmf^upjҺzym__YIKL:>F19E1>2J91`94HH\__dVZOSMOLKJJHEFBDAA?DFDFDFCECEBBCBCBDCD@E?F?F8?:B9C:C8A4<-9)>->.>-=,=,<,;,<-:,:,:,9+9-9-~8,}9.~:/~:/~:/}:1}:1}:1}:1}:1y:1y:1x90x90w8/t8.s7-s7-s9.s9.r8-r8-q8-p7,p7,p7,p5-o6-n5,n5,m4+l3*i3)i3)g1'k7,h4)e1&h4)d0%f4)uC8JELHPJTLWNYOx[Mp]Nj^N]WGPQAKN=CJ:9B12:+08)36-17-06,/5+/5)17+2:-4<-9D4;F6=H7*0640641622716929;0:<.:?)?H+KY5]pChLsTwYwWrQiT^IUx@WzB[~F[~F[~F]H_J_J_J_J^I^I]H]HUvKJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcToh^ng_lh_tqjũsbaZGML7CH2AI4AH6BF7BD7C@9D<9C98C772?5;@9@93H/+c76QRgimm[\YWUSQNKKGFBB@ACGDFDFBEBEADBBBBDCCBC?C>E>E>F-=,=,<,<*=+:,:,:.9-9-~8,}9.}9.~:/~:/}:1}:1}:1}:1}:1{;2w;1w;1v:0u9/t8.s9.r8-q7,r8-q8-p7,p7,n8,m7+m7+m7+o6-o6-n5,m4+j4*j4*i3)h4)f2'k7,h4)c1&e3(b0%e3(uC8JGNIQJTMXOzZMq[Mh\LXUDHK:=D4=E69A208+/7*5=056157257247005.06,08-19,6A3:E5=J9>K9;J77F12A,0?*.42.420511605818:/:<.:?+WzB[~FY|DY|D\G_J_J^I^I^I]H]H]HSsJHh?>^5icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUfc\gd]vsnȷɴicbFGG-EG/DF0GD3IC5H;3F42G34M797@;;@:@;8G85cGFkjŔ譩ҋtn]XSNNNIKEICGFHHKCF:>>@FIDG:;@@@@A@B>C>B.>/?.>-=,<+=*=*9-9-9-~8,~8,|8-|8-|8-}9.|90|90|90z:1z:1z:1z:1x=5w<4v;3u:2t91r7/p7.p7.o6-m7-m7-m7-m7-l8-l8-l8-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)^,#`0&_/%b2(p@6LJOKQJQJ}YMv_QfYIRO>CF5=F58C35@02=/3;04:04:077577566446135016/05..6+.9+2=/6C29H5:I68G42D./A+,20,2.-2..3-36/780:&DR1YkChRu[w_rWjN\}HXyDTu@Tu@WxCZ{F[|GZ{F^JbNbN^J\}H_K`L^JTrNFd@:X4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUed_onjͱcgkJMP1II/EC,HA/J>2L93M85Q99;;9BA?MHE\RQyjg̳ǿ괪̃|c\VTPSFM=DEEEEGHIKEG<><>@C>???@@A@B>B=A/>.>-=,<+=,<,9-9-9-~8,}9.|8-|8-|8-|90|90|90z:1z:1{;2{;2{;2v=4u<3t;2s:1r90p7.m7-m7-m7-l8-l8-l8-l8-j8-j8-j8-l5.n70n91n91l7/i4,g2*e3*c1(e3*_/%^.$b2(^.$`0&n?5IEQLWRWOrVKdRDQJ:>?/:A16A14A02>02<14<15;17:388677577557446116005./7,.8-1<.4A07E49H58G44E22D.062.40.3--2,14-45-8:-9=,7?'DQ3YkEhSv`wbpYfNZzHWwETtBTtBVvDYyGYyGYyG[{I_M_M\|J[{I^~L^~L\|JTmOF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVneVddby{xشĝj`hCRW7DG,EC.KD4MC9N?8L=8C:;SJKi`axv画ecACBINVVRLIDABAFEEFCDBD=?>>??@?A@A=B=A/>.=-<+=,=,9-9-9-}9.}9.|8-|8-{8/}:1}:1{;2{;2{;2{;2{;2{;2t;2s:1p:0o9/n8.m7-k7,k7,l8-l8-j8-j8-j8-j8-i9-i9-n91m80m80m80m80i7.f4+c1(c3)a1']-#_0&c4*\-#_0&sD:OKUPXQqSK^J?OC7?<-37(2:+/<+0<.2=/4<15;17:37:388688668557257227016/08-.8-0;-2?.6C27E48G48G48G46=53:2/4-,1*.1(13(57*6:)6>'DQ5[lHkZyfwflX^KWwEUuCRr@Rr@TtBVvDWwEWwEXxF[{I]}K[{I[{I]}K\|JXxFPfOAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVofWgkl۲™}cdnKLS4EI0HJ5KI:GE9D@7QEEk__莎bd>CPITMOJF@FBMJJI??>>>??>@?A?B?B?C?>8?:C=E?E>B9=5;2<1=0=1=0=-~<,=-=-~:/~:/~:/}9.}9.|8-{8/{8/~;2|<3|<3{;2{;2z;4z;4z;4p:0o9/o9/m9.l8-k7,j6+h6+i7,i7,h8,h8,h8,h8,h8,h8,o:4j81h6/i70j81j81e4-a0)e4-b1*].&a2*b3+Y*"_3*zNE~]XvWRiNGWC:J<3@:.:;-8<.08)/:,1<.2=/5=25;169078079468368349338138119.19..9+/:,1<.2?.5B18E4:I6;J7;C87?428.-3)-0%/1&24'48)4<'ER8_pPrd}nwifXT}EUrBTqASp@Sp@TqAUrBVsCVsCWtD[xH]zJ\yI^{K_|L\yIVsCK\JD8f\Z|z즤ifK=QDYN[QQHD=A@?B>C?C?C?C?>9@5<4<3=2=1=0=/~<.=/Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGQn>ESF6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXpgXinrz׹ĥregOMP;EL:EM>EODGSG~zqƽߑ}fSK:UFWKF;@8KEC>C?B?C@C>D>D>C=@6:6-85,99/8:/47,36+4:.5;/5;/69.69.68-57,46+19,19,19,19,19,19,19,19,08+.9+.9+/:*0;+3>.6A17B2gw]umvnf_RwKAh;Mj:Nk;Pm=Pm=Nk;Nk;OlVsCZwG]zJ^{K_|L_|LVsCLi9=H@/:2#.&gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXqhYqhYcjpmtzƯ}vn[ZWFOQCQWKYcZbmeq[WDSCQBMAJAG@E?E@E@E>D=Ce9Jg9Li;Nk=Nk=Li;Li;Mj
    UrDYvH[xJ]zL^{M\yKQn@Eb47@;+4/!*%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVofWpgXpgXqhYriZhowmt|ʹƯsce]P[YM_bYovo|Ȱ}gO=Q@RDC8IAH@F@F@E=D6qB:n?7pD;g;2g;2SJaXTKpE<6=52913:27<5492/5+25,9<345-35*24)13(13(35(46)57*,7',7'-8(-8(-8(-8(-8(/7(19*08)08+/7*/7*/7*08+08+7@+9B-=D2=D2=A29;-35'/3$3:*JVBcr[f}a\wVLnICgA=c:He7Kh:Nk=Nk=Kh:Jg9Li;Nk=TqCWtFZwI[xJ]zLZwINk=A^05;9*0.!'%heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVg`MjeOnlWnl]ff^eeeqqyֵymvW\fK`lTq~lЪa\D=MEKBC:A7D:H>JAI>G>J2K4L5K4H2F2E3E5D5C6@4>3;29/7/6-~:1~:1}90|8/{7.z7.y6-x5,w7-w7-x8.x8.v8-u7,s5*q3(h91h91h91g80h70g6/g6/g6/f5.h6/i70j81i70h6/f4-g2,k1-k4/n70m80k9.j:.i>.iB1dC2gJ8aJ8raOyn\|jqOL;4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4./4..3-.3-/4./4.05/0;32=55A77C98D86B64@22?.3@.DQ=WeN\jSSaHHV=DR8FT:Ic>Ke@Ke@Ke>JeOjAUpGYtK\vO]wR]wTWpPHaC8Q3).2&+/$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVjcPlgQmkVlj[gg_lll~~ЯvkrSYaI_kUto}uJ@K@JJ>D9=2?6D;H3J7M9J7G5C4D6F7C7C8A7>5<4:19181}:2}:2|91z:1y90x8/w7.v7.u6-v7.t8.t8.t8.r6,p4*o3)i81i81i81h70h70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71m80l:1k;/l>1j@0iD2hG6kP=gR?ufSvdsrML:4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4.05/-80/:21=34@66B66B66B45B16C1CPAO6BP7FT:Ic@Jd?Ke@Ke>Ic3L/).2',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVmhTmhRmkVjk[jkcvxwۿʫyuy^kpZt{iٞL=Q@K;>1G9XMTJ?6D6H9J=I=B7?5A7E=A9A9@:>8~>5<4<4;4x<2x<2w;1w;1v:0u9/t:/t:/s9.r9.r9.r9.q8-n8,l6*k5)j81j81j81j81i70i70i70h6/g5.g5.g5.g6/h70i81k:3k:3l;4k:3i:0j;1k?2lB4iD2fE2fI7lVAjYEviVl{mEF439/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4./4.*5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3ES:H`>Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8,C)).2',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\kd\md]meZmfVniUljSlkVlm]pqiؼǫ}ſınQ>P=XHL?D7G<>4D;H?F>?9;6=8A>?;@<@<}@;z?9y@9x?8v?8v=4v=4v=4u<3s=3r<2r<2q;1o;0o;0o;0l:/k9.j8-j8-i7,n72n72m61l71l71k60i70i70l:3j92h70g6/f7/f7/h91h91j?6f>4e=1f>2hC3iE5gF3cG2cJ6hV@k\GskVnzor_9>*28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3-.3-)4,)4,*6,+7-.:01=14@25A36C2:G5=7A;D?C?<;989:====>>@?|A=xA6s>6s>6r=5p>5p>5p>5n>4n>4m=3l<2j;1j;1i:0i:0i:0p62p62p62o51m61m61k60i70l;4k:3h91e90e90e90e:1f;2dB6cA5cC4dD5fG5eH6cH3_I2^L6eV?jbKrmWnr[`L3;&28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,-2,,6.+5-*4,*4++5,.8-0:/2=/2=-5@06A05A-1=)1=)5A+9E/=O5AS9FY=I\@J]?J]=K^>L_?TgG\oQcvZbtZYkSK]G6G4$5"&+.$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\lc\md]meZlfVlgSljSlnXorasvmθͺƶø̧lXZGVCM;A8BD??>;;99:;<<>??=}@=wB7o>7n?7o@8n?7m>6i=4h<3h<3h<3i=4r73q62q62p62o51m61l71j81h70g80e90e:1d<2f>4f@5gA6]C4aG8cL:dM;cM8`K6]K3]M4]Q9`Y?miPss[mt|eFO:2>(39/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+-2,,6.,6.*4,*4+*4++5*-7,.9+-8*0;+4?/5@/4?.3>-3?+4@,7F/;J3@P6DT:GWH=H>G@F@C@=:97<;=;>;A5i=4j>5j>5k?6s63r73q62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5bB5VG4^OmmSsw^zjcmU2>(5C,4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1+,1++5-+5-*4,*4,+5,+5,,6+-7,,7)/:,2=/6A17B27B25@/4?.2?+5B.:G3>L5AO6ES:JX?M[BTbI]kTcqZ_lXUbPERA2>0#/#(..&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdTjdVjcYkd\lc\md]lfZlfVomXmmUimVgkZembr{x׭sYSAQ?N>O?OBJ@C:<4<7>8?6@7{B7tD6qE8nG8s>:s>:s>:q>:q>:q>:q>:p?:sB=rA8l=7l=7m>8n?9r73r73q73n72m82j81i81f:1f;2d>3d@4bB5`C5]A3\@2[?1QI4[S>f^Gg_H`Y?ZS9ZS7\W:ZV;WW;knSrx^u}eUaI%37E.4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1+)3+)3+*4,+5-+5,,6--7.-7,,6+.8-2=/6A39D69D67B46A1/<*2?-5B09F2:u@:s@9o>9o>9n72n72n93m;4l;4j;3g<3d<2c?3^>1dG9cG9T=-O8(M8'D/TR;PN7KI0MK2]Y>ieJeaDVU7XX<]`CosXzfcmT=I1,:#1?(5;15;14:04:04:039/39/39/39/39/39/28.17-17-17-06,16016005/05//4./4./4./4.,1+,1+,1+,1+,1+,1++0*+0*.5.-4--4-,3,-4--4-.5-.5-+2*-4,08-5=29A6=E:?G7B25@03>-1<+2>*9E/BN8IU?O[EVbN]hWYdTLWIF5F4D4D2}B0yB.s@-o?+v?:t=8u>9v?:t?9q<6r=7sA:q?8q?8q?8o>7o>7n=6n=6n=6l;4m<5m>6k?6j?6h@6eA5cA5dG9[A2^G7\I8N=+F7$G8%A4!IM4GK2DG,BE*MM1[[?abC`aBYY=dgJsw\sy_X`H8D,/;%6D-7=36<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2+,3,.5--4,.5-07/4;39@8?F>BIA:G69F56C13@.2?+5B.;I2?M6KXDR_KXeSVcRKWI8p;5q<6vA;sA:p>7r@9xG@n=6n=6n=6m>6l=5l=5l=5l=5g?5h@6gA6gC7eC7cC6`C5^D5aL;UB1ZI7`S@RG3C;&E=(GA+>G,BH.@F*<@%?B%LO2_`AijKaaEnqTvz_gmSHP84<%4=(=F18>48>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*(/((/((/((/((/()0)*1*+2+070.5.+2++2+.5.5<5K:4-9/-3/-3/,2.gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWmlWimThpXht`hthm|wڻּҽzyS3i?3i?3i?3f>2f>2f>2f>2aA4`C5`C5_C5^D5[D4ZE4VE3XI6OB/\T?oiSc^HMK4IG0LJ3;E*?H->G*48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0,+0,*/+*/++0,,1--2.-2.051.3/+0,+0,-2.2738=9'4.:0.5..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWjnUiqYgs_drejytܽչѷѾӾϴu`yVBlI5mH6rM;uP>mF7iB3gB2jE5nI9oJ:pK;oK;eA1eA1cB1cB1cB1cB1cB1bC1\G6\G6\G6ZG6YH6WH5TG4RG3PH3MH2fdM~~fprZVX@IM4HL3;E*A.;>+9?59?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.21043376598:H7=L9@O<@O:8F91?2,9/.5.-4-,3,fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWioUiqYgs_bpcgxrڻѵ˴˺ӿһurd|]I}^JrVAaE0W;&Y=(Z?*X=(`E0`E0_F0_F0`G1`G1^H1^H1[L9ZM:ZM:XM9XM9UM8RL6QL6NL5QQ9ikS|glrXSY?DM2>G,:G+48>48>48>47=37=38>48>48>48>49?59?5:?9:?9:?9:?99>89>89>88=78=78=77<66;55:4493382382/40.3/-2.,1-+0,+0,+0,+0,+/.,0/-10.21/32/32/32.210A.5F3;M7>P:=O7:L47I/6H.3E-6H0:L6MJ9EB1;A7;A7;A7;A7:@6:@6:@69?58>48>48>49?59?5:@6:@6:@6;@:;@:;@::?9:?99>89>89>8:?9:?99>89>88=78=77<67<6495273162/40-2.,1-+0,+/.,0/,0/-10.21.21.23-12,01):'/@-6H2;M5=O7?I.9F*?L0=J.AN2DN3HQ4LR6IN0JM0ZY;miLhdIc]C_YA_ZD`[GZUBQN=LI8=C9=C9=C989>89>8;@:;@:;@:;@::?9:?9:?9:?99>:8=95:6384162/40.3/.21.21.21-10-12,01,01-12-12$5"*<&3E/9K3XW9UT6SR3KE/JD.FA-D?,A>/@>1??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B79A6:B7;C8F;7B:7C97A66A16?.4<-39-270.5./51-7/-9+-<%.B3J7O7Z 8Y$8W+:U2:R8;P==O?>O=:L6@R8EX:EZ;DY:>U93J0(>'.5-,3++2*ZgM[hN\hP_iQakSckTglXhkXghVihVifWifWkeWmeXmeZnf[khWkhYkg[kg^jf]jf]hfZgeVgjWglVfoZerajwnz̹˾NjlRM0TM0QK+SJ+WN/UO/UN1TO1SO2QP4QP4PP6QM2PO3PN5PP6MO7KO6HM6EM5HQ6EN3BK.AH)BI(GM+JP,KQ-NR/PT1VZ9^aBaaE[[?VVVV>XV=YW>XW;XW9WV8VU7QK5OI3LG3ID1DA2B@3??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C8F;76<83=51=/3B+9M*BY-Ia1Nq7Mn9Ji=Fa>AY?:L<:K9=O9DV5:@69A67B47B47C57D3:B7:B79A69A69A69A6:B7:B7:B7:B7:B7:B7;C8F;>F;>IA>J@?I>>I9?H7>F7>D8=B;>E>;A=6@85A39H1BV3Pg;ZrB]F\}HVuIMhEBZ@9N;5G74E3XR6F;?G<>H=>I9?H7>F7>D8=B;=D=;A=6@85A39H1DX5Ri=]uEY|BXyDRqEIdA,6H2@R8L_AQfGShIMdH@W=4J329107/-4,YgMZhN\hP^jRblTemVgoZjo[lo\lm[mk\mj[nhZnhZoi]ph]liXkhYjfZie\ie\ie\ig[igXfiVchRajUerao|s{ѿɶıþ˾Ÿ̌oRL2UN2TM0WN1VM.UO/WP3VQ3UQ4QP2ON2MM1PL1NM1NL3MM3LN6LP7KP9JR:LU:IR7JS6QX9SZ9U[9]c?gmIasxpr|Z\bFLP7KM7LK6KI4NI5PK7TM:VP:WQ;VP:SN:QL9LI:IG:EE9CE:=>6F;?G<=G<=H8>G6=E6=C7=B;:A:9?;5?75A39H1BV3Ne9Wo?Sv /* to declare isdigit() */ + + +#if TRANSFORMS_SUPPORTED + +/* + * Lossless image transformation routines. These routines work on DCT + * coefficient arrays and thus do not require any lossy decompression + * or recompression of the image. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. + * + * Horizontal flipping is done in-place, using a single top-to-bottom + * pass through the virtual source array. It will thus be much the + * fastest option for images larger than main memory. + * + * The other routines require a set of destination virtual arrays, so they + * need twice as much memory as jpegtran normally does. The destination + * arrays are always written in normal scan order (top to bottom) because + * the virtual array manager expects this. The source arrays will be scanned + * in the corresponding order, which means multiple passes through the source + * arrays for most of the transforms. That could result in much thrashing + * if the image is larger than main memory. + * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * + * Some notes about the operating environment of the individual transform + * routines: + * 1. Both the source and destination virtual arrays are allocated from the + * source JPEG object, and therefore should be manipulated by calling the + * source's memory manager. + * 2. The destination's component count should be used. It may be smaller + * than the source's when forcing to grayscale. + * 3. Likewise the destination's sampling factors should be used. When + * forcing to grayscale the destination's sampling factors will be all 1, + * and we may as well take that as the effective iMCU size. + * 4. When "trim" is in effect, the destination's dimensions will be the + * trimmed values but the source's will be untrimmed. + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are + * padded out to a full iMCU boundary. This is true, although for the + * source buffer it is an undocumented property of jdcoefct.c. + */ + + +/* Drop code may be used with or without virtual memory adaptation code. + * This code has some dependencies on internal library behavior, so you + * may choose to disable it. For example, it doesn't make a difference + * if you only use jmemnobs anyway. + */ +#ifndef DROP_REQUEST_FROM_SRC +#define DROP_REQUEST_FROM_SRC 1 /* 0 disables adaptation */ +#endif + + +#if DROP_REQUEST_FROM_SRC +/* Force jpeg_read_coefficients to request + * the virtual coefficient arrays from + * the source decompression object. + */ +METHODDEF(jvirt_barray_ptr) +drop_request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +{ + j_common_ptr srcinfo = (j_common_ptr) cinfo->client_data; + + return (*srcinfo->mem->request_virt_barray) + (srcinfo, pool_id, pre_zero, + blocksperrow, numrows, maxaccess); +} + + +/* Force jpeg_read_coefficients to return + * after requesting and before accessing + * the virtual coefficient arrays. + */ +METHODDEF(int) +drop_consume_input (j_decompress_ptr cinfo) +{ + return JPEG_SUSPENDED; +} + + +METHODDEF(void) +drop_start_input_pass (j_decompress_ptr cinfo) +{ + cinfo->inputctl->consume_input = drop_consume_input; +} + + +LOCAL(void) +drop_request_from_src (j_decompress_ptr dropinfo, j_decompress_ptr srcinfo) +{ + void *save_client_data; + JMETHOD(jvirt_barray_ptr, save_request_virt_barray, + (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, JDIMENSION maxaccess)); + JMETHOD(void, save_start_input_pass, (j_decompress_ptr cinfo)); + + /* Set custom method pointers, save original pointers */ + save_client_data = dropinfo->client_data; + dropinfo->client_data = (void *) srcinfo; + save_request_virt_barray = dropinfo->mem->request_virt_barray; + dropinfo->mem->request_virt_barray = drop_request_virt_barray; + save_start_input_pass = dropinfo->inputctl->start_input_pass; + dropinfo->inputctl->start_input_pass = drop_start_input_pass; + + /* Execute only initialization part. + * Requested coefficient arrays will be realized later by the srcinfo object. + * Next call to the same function will then do the actual data reading. + * NB: since we request the coefficient arrays from another object, + * the inherent realization call is effectively a no-op. + */ + (void) jpeg_read_coefficients(dropinfo); + + /* Reset method pointers */ + dropinfo->client_data = save_client_data; + dropinfo->mem->request_virt_barray = save_request_virt_barray; + dropinfo->inputctl->start_input_pass = save_start_input_pass; + /* Do input initialization for first scan now, + * which also resets the consume_input method. + */ + (*save_start_input_pass)(dropinfo); +} +#endif /* DROP_REQUEST_FROM_SRC */ + + +LOCAL(void) +dequant_comp (j_decompress_ptr cinfo, jpeg_component_info *compptr, + jvirt_barray_ptr coef_array, JQUANT_TBL *qtblptr1) +{ + JDIMENSION blk_x, blk_y; + int offset_y, k; + JQUANT_TBL *qtblptr; + JBLOCKARRAY buffer; + JBLOCKROW block; + JCOEFPTR ptr; + + qtblptr = compptr->quant_table; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef_array, blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + block = buffer[offset_y]; + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + ptr = block[blk_x]; + for (k = 0; k < DCTSIZE2; k++) + if (qtblptr->quantval[k] != qtblptr1->quantval[k]) + ptr[k] *= qtblptr->quantval[k] / qtblptr1->quantval[k]; + } + } + } +} + + +LOCAL(void) +requant_comp (j_decompress_ptr cinfo, jpeg_component_info *compptr, + jvirt_barray_ptr coef_array, JQUANT_TBL *qtblptr1) +{ + JDIMENSION blk_x, blk_y; + int offset_y, k; + JQUANT_TBL *qtblptr; + JBLOCKARRAY buffer; + JBLOCKROW block; + JCOEFPTR ptr; + JCOEF temp, qval; + + qtblptr = compptr->quant_table; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef_array, blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + block = buffer[offset_y]; + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + ptr = block[blk_x]; + for (k = 0; k < DCTSIZE2; k++) { + temp = qtblptr->quantval[k]; + qval = qtblptr1->quantval[k]; + if (temp != qval) { + temp *= ptr[k]; + /* The following quantization code is a copy from jcdctmgr.c */ +#ifdef FAST_DIVIDE +#define DIVIDE_BY(a,b) a /= b +#else +#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 +#endif + if (temp < 0) { + temp = -temp; + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + temp = -temp; + } else { + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + } + ptr[k] = temp; + } + } + } + } + } +} + + +/* Calculate largest common denominator with Euclid's algorithm. + */ +LOCAL(JCOEF) +largest_common_denominator(JCOEF a, JCOEF b) +{ + JCOEF c; + + do { + c = a % b; + a = b; + b = c; + } while (c); + + return a; +} + + +LOCAL(void) +adjust_quant(j_decompress_ptr srcinfo, jvirt_barray_ptr *src_coef_arrays, + j_decompress_ptr dropinfo, jvirt_barray_ptr *drop_coef_arrays, + boolean trim, j_compress_ptr dstinfo) +{ + jpeg_component_info *compptr1, *compptr2; + JQUANT_TBL *qtblptr1, *qtblptr2, *qtblptr3; + int ci, k; + + for (ci = 0; ci < dstinfo->num_components && + ci < dropinfo->num_components; ci++) { + compptr1 = srcinfo->comp_info + ci; + compptr2 = dropinfo->comp_info + ci; + qtblptr1 = compptr1->quant_table; + qtblptr2 = compptr2->quant_table; + for (k = 0; k < DCTSIZE2; k++) { + if (qtblptr1->quantval[k] != qtblptr2->quantval[k]) { + if (trim) + requant_comp(dropinfo, compptr2, drop_coef_arrays[ci], qtblptr1); + else { + qtblptr3 = dstinfo->quant_tbl_ptrs[compptr1->quant_tbl_no]; + for (k = 0; k < DCTSIZE2; k++) + if (qtblptr1->quantval[k] != qtblptr2->quantval[k]) + qtblptr3->quantval[k] = largest_common_denominator + (qtblptr1->quantval[k], qtblptr2->quantval[k]); + dequant_comp(srcinfo, compptr1, src_coef_arrays[ci], qtblptr3); + dequant_comp(dropinfo, compptr2, drop_coef_arrays[ci], qtblptr3); + } + break; + } + } + } +} + + +LOCAL(void) +do_drop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + j_decompress_ptr dropinfo, jvirt_barray_ptr *drop_coef_arrays, + JDIMENSION drop_width, JDIMENSION drop_height) +/* Drop. If the dropinfo component number is smaller than the destination's, + * we fill in the remaining components with zero. This provides the feature + * of dropping grayscale into (arbitrarily sampled) color images. + */ +{ + JDIMENSION comp_width, comp_height; + JDIMENSION blk_y, x_drop_blocks, y_drop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = drop_width * compptr->h_samp_factor; + comp_height = drop_height * compptr->v_samp_factor; + x_drop_blocks = x_crop_offset * compptr->h_samp_factor; + y_drop_blocks = y_crop_offset * compptr->v_samp_factor; + for (blk_y = 0; blk_y < comp_height; blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y + y_drop_blocks, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (ci < dropinfo->num_components) { +#if DROP_REQUEST_FROM_SRC + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, drop_coef_arrays[ci], blk_y, +#else + src_buffer = (*dropinfo->mem->access_virt_barray) + ((j_common_ptr) dropinfo, drop_coef_arrays[ci], blk_y, +#endif + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y], + dst_buffer[offset_y] + x_drop_blocks, + comp_width); + } + } else { + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(dst_buffer[offset_y] + x_drop_blocks, + comp_width * SIZEOF(JBLOCK)); + } + } + } + } +} + + +LOCAL(void) +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ +{ + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } +} + + +LOCAL(void) +do_crop_ext_zero (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. + * Extension: If the destination size is larger than the source, we fill in + * the extra area with zero (neutral gray). Note we also have to zero partial + * iMCUs at the right and bottom edge of the source image area in this case. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height; + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (dstinfo->jpeg_height > srcinfo->output_height) { + if (dst_blk_y < y_crop_blocks || + dst_blk_y >= y_crop_blocks + comp_height) { + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(dst_buffer[offset_y], + compptr->width_in_blocks * SIZEOF(JBLOCK)); + } + continue; + } + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y - y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (dstinfo->jpeg_width > srcinfo->output_width) { + if (x_crop_blocks > 0) { + FMEMZERO(dst_buffer[offset_y], + x_crop_blocks * SIZEOF(JBLOCK)); + } + jcopy_block_row(src_buffer[offset_y], + dst_buffer[offset_y] + x_crop_blocks, + comp_width); + if (compptr->width_in_blocks > x_crop_blocks + comp_width) { + FMEMZERO(dst_buffer[offset_y] + + x_crop_blocks + comp_width, + (compptr->width_in_blocks - + x_crop_blocks - comp_width) * SIZEOF(JBLOCK)); + } + } else { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_crop_ext_flat (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. + * Extension: The destination width is larger than the source and we fill in + * the extra area with the DC of the adjacent block. Note we also have to + * fill partial iMCUs at the right and bottom edge of the source image area + * in this case. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height; + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JCOEF dc; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (dstinfo->jpeg_height > srcinfo->output_height) { + if (dst_blk_y < y_crop_blocks || + dst_blk_y >= y_crop_blocks + comp_height) { + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(dst_buffer[offset_y], + compptr->width_in_blocks * SIZEOF(JBLOCK)); + } + continue; + } + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y - y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (x_crop_blocks > 0) { + FMEMZERO(dst_buffer[offset_y], + x_crop_blocks * SIZEOF(JBLOCK)); + dc = src_buffer[offset_y][0][0]; + for (dst_blk_x = 0; dst_blk_x < x_crop_blocks; dst_blk_x++) { + dst_buffer[offset_y][dst_blk_x][0] = dc; + } + } + jcopy_block_row(src_buffer[offset_y], + dst_buffer[offset_y] + x_crop_blocks, + comp_width); + if (compptr->width_in_blocks > x_crop_blocks + comp_width) { + FMEMZERO(dst_buffer[offset_y] + + x_crop_blocks + comp_width, + (compptr->width_in_blocks - + x_crop_blocks - comp_width) * SIZEOF(JBLOCK)); + dc = src_buffer[offset_y][comp_width - 1][0]; + for (dst_blk_x = x_crop_blocks + comp_width; + dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + dst_buffer[offset_y][dst_blk_x][0] = dc; + } + } + } + } + } +} + + +LOCAL(void) +do_crop_ext_reflect (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. + * Extension: The destination width is larger than the source and we fill in + * the extra area with repeated reflections of the source region. Note we + * also have to fill partial iMCUs at the right and bottom edge of the source + * image area in this case. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, src_blk_x; + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (dstinfo->jpeg_height > srcinfo->output_height) { + if (dst_blk_y < y_crop_blocks || + dst_blk_y >= y_crop_blocks + comp_height) { + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(dst_buffer[offset_y], + compptr->width_in_blocks * SIZEOF(JBLOCK)); + } + continue; + } + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y - y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Copy source region */ + jcopy_block_row(src_buffer[offset_y], + dst_buffer[offset_y] + x_crop_blocks, + comp_width); + if (x_crop_blocks > 0) { + /* Reflect to left */ + dst_row_ptr = dst_buffer[offset_y] + x_crop_blocks; + for (dst_blk_x = x_crop_blocks; dst_blk_x > 0;) { + src_row_ptr = dst_row_ptr; /* (re)set axis of reflection */ + for (src_blk_x = comp_width; src_blk_x > 0 && dst_blk_x > 0; + src_blk_x--, dst_blk_x--) { + dst_ptr = *--dst_row_ptr; /* destination goes left */ + src_ptr = *src_row_ptr++; /* source goes right */ + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } + } + } + if (compptr->width_in_blocks > x_crop_blocks + comp_width) { + /* Reflect to right */ + dst_row_ptr = dst_buffer[offset_y] + x_crop_blocks + comp_width; + for (dst_blk_x = compptr->width_in_blocks - x_crop_blocks - comp_width; + dst_blk_x > 0;) { + src_row_ptr = dst_row_ptr; /* (re)set axis of reflection */ + for (src_blk_x = comp_width; src_blk_x > 0 && dst_blk_x > 0; + src_blk_x--, dst_blk_x--) { + dst_ptr = *dst_row_ptr++; /* destination goes right */ + src_ptr = *--src_row_ptr; /* source goes left */ + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } + } + } + } + } + } +} + + +LOCAL(void) +do_wipe (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + JDIMENSION drop_width, JDIMENSION drop_height) +/* Wipe - drop content of specified area, fill with zero (neutral gray) */ +{ + JDIMENSION x_wipe_blocks, wipe_width; + JDIMENSION y_wipe_blocks, wipe_bottom; + int ci, offset_y; + JBLOCKARRAY buffer; + jpeg_component_info *compptr; + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_wipe_blocks = x_crop_offset * compptr->h_samp_factor; + wipe_width = drop_width * compptr->h_samp_factor; + y_wipe_blocks = y_crop_offset * compptr->v_samp_factor; + wipe_bottom = drop_height * compptr->v_samp_factor + y_wipe_blocks; + for (; y_wipe_blocks < wipe_bottom; + y_wipe_blocks += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], y_wipe_blocks, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(buffer[offset_y] + x_wipe_blocks, + wipe_width * SIZEOF(JBLOCK)); + } + } + } +} + + +LOCAL(void) +do_flatten (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + JDIMENSION drop_width, JDIMENSION drop_height) +/* Flatten - drop content of specified area, similar to wipe, + * but fill with average of adjacent blocks, instead of zero. + */ +{ + JDIMENSION x_wipe_blocks, wipe_width, wipe_right; + JDIMENSION y_wipe_blocks, wipe_bottom, blk_x; + int ci, offset_y, dc_left_value, dc_right_value, average; + JBLOCKARRAY buffer; + jpeg_component_info *compptr; + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_wipe_blocks = x_crop_offset * compptr->h_samp_factor; + wipe_width = drop_width * compptr->h_samp_factor; + wipe_right = wipe_width + x_wipe_blocks; + y_wipe_blocks = y_crop_offset * compptr->v_samp_factor; + wipe_bottom = drop_height * compptr->v_samp_factor + y_wipe_blocks; + for (; y_wipe_blocks < wipe_bottom; + y_wipe_blocks += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], y_wipe_blocks, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(buffer[offset_y] + x_wipe_blocks, + wipe_width * SIZEOF(JBLOCK)); + if (x_wipe_blocks > 0) { + dc_left_value = buffer[offset_y][x_wipe_blocks - 1][0]; + if (wipe_right < compptr->width_in_blocks) { + dc_right_value = buffer[offset_y][wipe_right][0]; + average = (dc_left_value + dc_right_value) >> 1; + } else { + average = dc_left_value; + } + } else if (wipe_right < compptr->width_in_blocks) { + average = buffer[offset_y][wipe_right][0]; + } else continue; + for (blk_x = x_wipe_blocks; blk_x < wipe_right; blk_x++) { + buffer[offset_y][blk_x][0] = (JCOEF) average; + } + } + } + } +} + + +LOCAL(void) +do_reflect (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + JDIMENSION drop_width, JDIMENSION drop_height) +/* Reflect - drop content of specified area, similar to wipe, but + * fill with repeated reflections of the outside area, instead of zero. + * NB: y_crop_offset is assumed to be zero. + */ +{ + JDIMENSION x_wipe_blocks, wipe_width; + JDIMENSION y_wipe_blocks, wipe_bottom; + JDIMENSION src_blk_x, dst_blk_x; + int ci, k, offset_y; + JBLOCKARRAY buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_wipe_blocks = x_crop_offset * compptr->h_samp_factor; + wipe_width = drop_width * compptr->h_samp_factor; + wipe_bottom = drop_height * compptr->v_samp_factor; + for (y_wipe_blocks = 0; y_wipe_blocks < wipe_bottom; + y_wipe_blocks += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], y_wipe_blocks, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (x_wipe_blocks > 0) { + /* Reflect from left */ + dst_row_ptr = buffer[offset_y] + x_wipe_blocks; + for (dst_blk_x = wipe_width; dst_blk_x > 0;) { + src_row_ptr = dst_row_ptr; /* (re)set axis of reflection */ + for (src_blk_x = x_wipe_blocks; + src_blk_x > 0 && dst_blk_x > 0; src_blk_x--, dst_blk_x--) { + dst_ptr = *dst_row_ptr++; /* destination goes right */ + src_ptr = *--src_row_ptr; /* source goes left */ + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } + } + } else if (compptr->width_in_blocks > x_wipe_blocks + wipe_width) { + /* Reflect from right */ + dst_row_ptr = buffer[offset_y] + x_wipe_blocks + wipe_width; + for (dst_blk_x = wipe_width; dst_blk_x > 0;) { + src_row_ptr = dst_row_ptr; /* (re)set axis of reflection */ + src_blk_x = compptr->width_in_blocks - x_wipe_blocks - wipe_width; + for (; src_blk_x > 0 && dst_blk_x > 0; src_blk_x--, dst_blk_x--) { + dst_ptr = *--dst_row_ptr; /* destination goes left */ + src_ptr = *src_row_ptr++; /* source goes right */ + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } + } + } else { + FMEMZERO(buffer[offset_y] + x_wipe_blocks, + wipe_width * SIZEOF(JBLOCK)); + } + } + } + } +} + + +LOCAL(void) +do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays) +/* Horizontal flip; done in-place, so no separate dest array is required. + * NB: this only works when y_crop_offset is zero. + */ +{ + JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY buffer; + JCOEFPTR ptr1, ptr2; + JCOEF temp1, temp2; + jpeg_component_info *compptr; + + /* Horizontal mirroring of DCT blocks is accomplished by swapping + * pairs of blocks in-place. Within a DCT block, we perform horizontal + * mirroring by changing the signs of odd-numbered columns. + * Partial iMCUs at the right edge are left untouched. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Do the mirroring */ + for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { + ptr1 = buffer[offset_y][blk_x]; + ptr2 = buffer[offset_y][comp_width - blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + temp1 = *ptr1; /* swap even column */ + temp2 = *ptr2; + *ptr1++ = temp2; + *ptr2++ = temp1; + temp1 = *ptr1; /* swap odd column with sign change */ + temp2 = *ptr2; + *ptr1++ = -temp2; + *ptr2++ = -temp1; + } + } + if (x_crop_blocks > 0) { + /* Now left-justify the portion of the data to be kept. + * We can't use a single jcopy_block_row() call because that routine + * depends on memcpy(), whose behavior is unspecified for overlapping + * source and destination areas. Sigh. + */ + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, + buffer[offset_y] + blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Horizontal flip in general cropping case */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Here we must output into a separate array because we can't touch + * different rows of a single virtual array simultaneously. Otherwise, + * this is essentially the same as the routine above. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Do the mirrorable blocks */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } else { + /* Copy last partial block(s) verbatim */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Vertical flip */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* We output into a separate array because we can't touch different + * rows of the source virtual array simultaneously. Otherwise, this + * is a pretty straightforward analog of horizontal flip. + * Within a DCT block, vertical mirroring is done by changing the signs + * of odd-numbered rows. + * Partial iMCUs at the bottom edge are copied verbatim. + */ + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge blocks will be copied verbatim. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + src_row_ptr += x_crop_blocks; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + /* copy even row */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + /* copy odd row with sign change */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } else { + /* Just copy row verbatim. */ + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transpose source into destination */ +{ + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Transposing pixels within a block just requires transposing the + * DCT coefficients. + * Partial iMCUs at the edges require no special treatment; we simply + * process all the available DCT blocks for every component. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } +} + + +LOCAL(void) +do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 90 degree rotation is equivalent to + * 1. Transposing the image; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) right edge properly. They just get transposed and + * not mirrored. + */ + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + /* Edge blocks are transposed but not mirrored. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 270 degree rotation is equivalent to + * 1. Horizontal mirroring; + * 2. Transposing the image. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) bottom edge properly. They just get transposed and + * not mirrored. + */ + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 180 degree rotation is equivalent to + * 1. Vertical mirroring; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the vertically mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge rows are only mirrored horizontally. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored both ways. */ + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE; i += 2) { + /* For even row, negate every odd column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + /* For odd row, negate every even column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = - *src_ptr++; + *dst_ptr++ = *src_ptr++; + } + } + } else { + /* Any remaining right-edge blocks are only mirrored vertically. */ + src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } + } else { + /* Remaining rows are just mirrored horizontally. */ + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored. */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE2; i += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + } else { + /* Any remaining right-edge blocks are only copied. */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } + } +} + + +LOCAL(void) +do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transverse transpose is equivalent to + * 1. 180 degree rotation; + * 2. Transposition; + * or + * 1. Horizontal mirroring; + * 2. Transposition; + * 3. Horizontal mirroring. + * These steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + i++; + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Right-edge blocks are mirrored in y only */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } + } else { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Bottom-edge blocks are mirrored in x only */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* At lower right corner, just transpose, no mirroring */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } + } +} + + +/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. + * Returns TRUE if valid integer found, FALSE if not. + * *strptr is advanced over the digit string, and *result is set to its value. + */ + +LOCAL(boolean) +jt_read_integer (const char ** strptr, JDIMENSION * result) +{ + const char * ptr = *strptr; + JDIMENSION val = 0; + + for (; isdigit(*ptr); ptr++) { + val = val * 10 + (JDIMENSION) (*ptr - '0'); + } + *result = val; + if (ptr == *strptr) + return FALSE; /* oops, no digits */ + *strptr = ptr; + return TRUE; +} + + +/* Parse a crop specification (written in X11 geometry style). + * The routine returns TRUE if the spec string is valid, FALSE if not. + * + * The crop spec string should have the format + * [{fr}]x[{fr}]{+-}{+-} + * where width, height, xoffset, and yoffset are unsigned integers. + * Each of the elements can be omitted to indicate a default value. + * (A weakness of this style is that it is not possible to omit xoffset + * while specifying yoffset, since they look alike.) + * + * This code is loosely based on XParseGeometry from the X11 distribution. + */ + +GLOBAL(boolean) +jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) +{ + info->crop = FALSE; + info->crop_width_set = JCROP_UNSET; + info->crop_height_set = JCROP_UNSET; + info->crop_xoffset_set = JCROP_UNSET; + info->crop_yoffset_set = JCROP_UNSET; + + if (isdigit(*spec)) { + /* fetch width */ + if (! jt_read_integer(&spec, &info->crop_width)) + return FALSE; + if (*spec == 'f' || *spec == 'F') { + spec++; + info->crop_width_set = JCROP_FORCE; + } else if (*spec == 'r' || *spec == 'R') { + spec++; + info->crop_width_set = JCROP_REFLECT; + } else + info->crop_width_set = JCROP_POS; + } + if (*spec == 'x' || *spec == 'X') { + /* fetch height */ + spec++; + if (! jt_read_integer(&spec, &info->crop_height)) + return FALSE; + if (*spec == 'f' || *spec == 'F') { + spec++; + info->crop_height_set = JCROP_FORCE; + } else if (*spec == 'r' || *spec == 'R') { + spec++; + info->crop_height_set = JCROP_REFLECT; + } else + info->crop_height_set = JCROP_POS; + } + if (*spec == '+' || *spec == '-') { + /* fetch xoffset */ + info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_xoffset)) + return FALSE; + } + if (*spec == '+' || *spec == '-') { + /* fetch yoffset */ + info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_yoffset)) + return FALSE; + } + /* We had better have gotten to the end of the string. */ + if (*spec != '\0') + return FALSE; + info->crop = TRUE; + return TRUE; +} + + +/* Trim off any partial iMCUs on the indicated destination edge */ + +LOCAL(void) +trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) +{ + JDIMENSION MCU_cols; + + MCU_cols = info->output_width / info->iMCU_sample_width; + if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == + full_width / info->iMCU_sample_width) + info->output_width = MCU_cols * info->iMCU_sample_width; +} + +LOCAL(void) +trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) +{ + JDIMENSION MCU_rows; + + MCU_rows = info->output_height / info->iMCU_sample_height; + if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == + full_height / info->iMCU_sample_height) + info->output_height = MCU_rows * info->iMCU_sample_height; +} + + +/* Request any required workspace. + * + * This routine figures out the size that the output image will be + * (which implies that all the transform parameters must be set before + * it is called). + * + * We allocate the workspace virtual arrays from the source decompression + * object, so that all the arrays (both the original data and the workspace) + * will be taken into account while making memory management decisions. + * Hence, this routine must be called after jpeg_read_header (which reads + * the image dimensions) and before jpeg_read_coefficients (which realizes + * the source's virtual arrays). + * + * This function returns FALSE right away if -perfect is given + * and transformation is not perfect. Otherwise returns TRUE. + */ + +GLOBAL(boolean) +jtransform_request_workspace (j_decompress_ptr srcinfo, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *coef_arrays; + boolean need_workspace, transpose_it; + jpeg_component_info *compptr; + JDIMENSION xoffset, yoffset, dtemp; + JDIMENSION width_in_iMCUs, height_in_iMCUs; + JDIMENSION width_in_blocks, height_in_blocks; + int itemp, ci, h_samp_factor, v_samp_factor; + + /* Determine number of components in output image */ + if (info->force_grayscale && + (srcinfo->jpeg_color_space == JCS_YCbCr || + srcinfo->jpeg_color_space == JCS_BG_YCC) && + srcinfo->num_components == 3) + /* We'll only process the first component */ + info->num_components = 1; + else + /* Process all the components */ + info->num_components = srcinfo->num_components; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(srcinfo); + + /* Return right away if -perfect is given and transformation is not perfect. + */ + if (info->perfect) { + if (info->num_components == 1) { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->min_DCT_h_scaled_size, + srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } else { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size, + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } + } + + /* If there is only one output component, force the iMCU size to be 1; + * else use the source iMCU size. (This allows us to do the right thing + * when reducing color to grayscale, and also provides a handy way of + * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) + */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + info->output_width = srcinfo->output_height; + info->output_height = srcinfo->output_width; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + } + break; + default: + info->output_width = srcinfo->output_width; + info->output_height = srcinfo->output_height; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + } + } + + /* If cropping has been requested, compute the crop area's position and + * dimensions, ensuring that its upper left corner falls at an iMCU boundary. + */ + if (info->crop) { + /* Insert default values for unset crop parameters */ + if (info->crop_xoffset_set == JCROP_UNSET) + info->crop_xoffset = 0; /* default to +0 */ + if (info->crop_yoffset_set == JCROP_UNSET) + info->crop_yoffset = 0; /* default to +0 */ + if (info->crop_width_set == JCROP_UNSET) { + if (info->crop_xoffset >= info->output_width) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + info->crop_width = info->output_width - info->crop_xoffset; + } else { + /* Check for crop extension */ + if (info->crop_width > info->output_width) { + /* Crop extension does not work when transforming! */ + if (info->transform != JXFORM_NONE || + info->crop_xoffset >= info->crop_width || + info->crop_xoffset > info->crop_width - info->output_width) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } else { + if (info->crop_xoffset >= info->output_width || + info->crop_width <= 0 || + info->crop_xoffset > info->output_width - info->crop_width) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } + } + if (info->crop_height_set == JCROP_UNSET) { + if (info->crop_yoffset >= info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + info->crop_height = info->output_height - info->crop_yoffset; + } else { + /* Check for crop extension */ + if (info->crop_height > info->output_height) { + /* Crop extension does not work when transforming! */ + if (info->transform != JXFORM_NONE || + info->crop_yoffset >= info->crop_height || + info->crop_yoffset > info->crop_height - info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } else { + if (info->crop_yoffset >= info->output_height || + info->crop_height <= 0 || + info->crop_yoffset > info->output_height - info->crop_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } + } + /* Convert negative crop offsets into regular offsets */ + if (info->crop_xoffset_set != JCROP_NEG) + xoffset = info->crop_xoffset; + else if (info->crop_width > info->output_width) /* crop extension */ + xoffset = info->crop_width - info->output_width - info->crop_xoffset; + else + xoffset = info->output_width - info->crop_width - info->crop_xoffset; + if (info->crop_yoffset_set != JCROP_NEG) + yoffset = info->crop_yoffset; + else if (info->crop_height > info->output_height) /* crop extension */ + yoffset = info->crop_height - info->output_height - info->crop_yoffset; + else + yoffset = info->output_height - info->crop_height - info->crop_yoffset; + /* Now adjust so that upper left corner falls at an iMCU boundary */ + switch (info->transform) { + case JXFORM_DROP: + /* Ensure the effective drop region will not exceed the requested */ + itemp = info->iMCU_sample_width; + dtemp = itemp - 1 - ((xoffset + itemp - 1) % itemp); + xoffset += dtemp; + if (info->crop_width <= dtemp) + info->drop_width = 0; + else if (xoffset + info->crop_width - dtemp == info->output_width) + /* Matching right edge: include partial iMCU */ + info->drop_width = (info->crop_width - dtemp + itemp - 1) / itemp; + else + info->drop_width = (info->crop_width - dtemp) / itemp; + itemp = info->iMCU_sample_height; + dtemp = itemp - 1 - ((yoffset + itemp - 1) % itemp); + yoffset += dtemp; + if (info->crop_height <= dtemp) + info->drop_height = 0; + else if (yoffset + info->crop_height - dtemp == info->output_height) + /* Matching bottom edge: include partial iMCU */ + info->drop_height = (info->crop_height - dtemp + itemp - 1) / itemp; + else + info->drop_height = (info->crop_height - dtemp) / itemp; + /* Check if sampling factors match for dropping */ + if (info->drop_width != 0 && info->drop_height != 0) + for (ci = 0; ci < info->num_components && + ci < info->drop_ptr->num_components; ci++) { + if (info->drop_ptr->comp_info[ci].h_samp_factor * + srcinfo->max_h_samp_factor != + srcinfo->comp_info[ci].h_samp_factor * + info->drop_ptr->max_h_samp_factor) + ERREXIT6(srcinfo, JERR_BAD_DROP_SAMPLING, ci, + info->drop_ptr->comp_info[ci].h_samp_factor, + info->drop_ptr->max_h_samp_factor, + srcinfo->comp_info[ci].h_samp_factor, + srcinfo->max_h_samp_factor, 'h'); + if (info->drop_ptr->comp_info[ci].v_samp_factor * + srcinfo->max_v_samp_factor != + srcinfo->comp_info[ci].v_samp_factor * + info->drop_ptr->max_v_samp_factor) + ERREXIT6(srcinfo, JERR_BAD_DROP_SAMPLING, ci, + info->drop_ptr->comp_info[ci].v_samp_factor, + info->drop_ptr->max_v_samp_factor, + srcinfo->comp_info[ci].v_samp_factor, + srcinfo->max_v_samp_factor, 'v'); + } + break; + case JXFORM_WIPE: + /* Ensure the effective wipe region will cover the requested */ + info->drop_width = (JDIMENSION) jdiv_round_up + ((long) (info->crop_width + (xoffset % info->iMCU_sample_width)), + (long) info->iMCU_sample_width); + info->drop_height = (JDIMENSION) jdiv_round_up + ((long) (info->crop_height + (yoffset % info->iMCU_sample_height)), + (long) info->iMCU_sample_height); + break; + default: + /* Ensure the effective crop region will cover the requested */ + if (info->crop_width_set == JCROP_FORCE || + info->crop_width > info->output_width) + info->output_width = info->crop_width; + else + info->output_width = + info->crop_width + (xoffset % info->iMCU_sample_width); + if (info->crop_height_set == JCROP_FORCE || + info->crop_height > info->output_height) + info->output_height = info->crop_height; + else + info->output_height = + info->crop_height + (yoffset % info->iMCU_sample_height); + } + /* Save x/y offsets measured in iMCUs */ + info->x_crop_offset = xoffset / info->iMCU_sample_width; + info->y_crop_offset = yoffset / info->iMCU_sample_height; + } else { + info->x_crop_offset = 0; + info->y_crop_offset = 0; + } + + /* Figure out whether we need workspace arrays, + * and if so whether they are transposed relative to the source. + */ + need_workspace = FALSE; + transpose_it = FALSE; + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0 || + info->output_width > srcinfo->output_width || + info->output_height > srcinfo->output_height) + need_workspace = TRUE; + /* No workspace needed if neither cropping nor transforming */ + break; + case JXFORM_FLIP_H: + if (info->trim) + trim_right_edge(info, srcinfo->output_width); + if (info->y_crop_offset != 0) + need_workspace = TRUE; + /* do_flip_h_no_crop doesn't need a workspace array */ + break; + case JXFORM_FLIP_V: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_height); + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_TRANSPOSE: + /* transpose does NOT have to trim anything */ + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_TRANSVERSE: + if (info->trim) { + trim_right_edge(info, srcinfo->output_height); + trim_bottom_edge(info, srcinfo->output_width); + } + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_90: + if (info->trim) + trim_right_edge(info, srcinfo->output_height); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_180: + if (info->trim) { + trim_right_edge(info, srcinfo->output_width); + trim_bottom_edge(info, srcinfo->output_height); + } + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_ROT_270: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_width); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_WIPE: + break; + case JXFORM_DROP: +#if DROP_REQUEST_FROM_SRC + drop_request_from_src(info->drop_ptr, srcinfo); +#endif + break; + } + + /* Allocate workspace if needed. + * Note that we allocate arrays padded out to the next iMCU boundary, + * so that transform routines need not worry about missing edge blocks. + */ + if (need_workspace) { + coef_arrays = (jvirt_barray_ptr *) (*srcinfo->mem->alloc_small) + ((j_common_ptr) srcinfo, JPOOL_IMAGE, + SIZEOF(jvirt_barray_ptr) * info->num_components); + width_in_iMCUs = (JDIMENSION) jdiv_round_up + ((long) info->output_width, (long) info->iMCU_sample_width); + height_in_iMCUs = (JDIMENSION) jdiv_round_up + ((long) info->output_height, (long) info->iMCU_sample_height); + for (ci = 0; ci < info->num_components; ci++) { + compptr = srcinfo->comp_info + ci; + if (info->num_components == 1) { + /* we're going to force samp factors to 1x1 in this case */ + h_samp_factor = v_samp_factor = 1; + } else if (transpose_it) { + h_samp_factor = compptr->v_samp_factor; + v_samp_factor = compptr->h_samp_factor; + } else { + h_samp_factor = compptr->h_samp_factor; + v_samp_factor = compptr->v_samp_factor; + } + width_in_blocks = width_in_iMCUs * h_samp_factor; + height_in_blocks = height_in_iMCUs * v_samp_factor; + coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) + ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, + width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); + } + info->workspace_coef_arrays = coef_arrays; + } else + info->workspace_coef_arrays = NULL; + + return TRUE; +} + + +/* Transpose destination image parameters */ + +LOCAL(void) +transpose_critical_parameters (j_compress_ptr dstinfo) +{ + int tblno, i, j, ci, itemp; + jpeg_component_info *compptr; + JQUANT_TBL *qtblptr; + JDIMENSION jtemp; + UINT16 qtemp; + + /* Transpose image dimensions */ + jtemp = dstinfo->image_width; + dstinfo->image_width = dstinfo->image_height; + dstinfo->image_height = jtemp; + itemp = dstinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size; + dstinfo->min_DCT_v_scaled_size = itemp; + + /* Transpose sampling factors */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + itemp = compptr->h_samp_factor; + compptr->h_samp_factor = compptr->v_samp_factor; + compptr->v_samp_factor = itemp; + } + + /* Transpose quantization tables */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + qtblptr = dstinfo->quant_tbl_ptrs[tblno]; + if (qtblptr != NULL) { + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < i; j++) { + qtemp = qtblptr->quantval[i*DCTSIZE+j]; + qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; + qtblptr->quantval[j*DCTSIZE+i] = qtemp; + } + } + } + } +} + + +/* Adjust Exif image parameters. + * + * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. + */ + +LOCAL(void) +adjust_exif_parameters (JOCTET FAR * data, unsigned int length, + JDIMENSION new_width, JDIMENSION new_height) +{ + boolean is_motorola; /* Flag for byte order */ + unsigned int number_of_tags, tagnum; + unsigned int firstoffset, offset; + JDIMENSION new_value; + + if (length < 12) return; /* Length of an IFD entry */ + + /* Discover byte order */ + if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) + is_motorola = FALSE; + else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) + is_motorola = TRUE; + else + return; + + /* Check Tag Mark */ + if (is_motorola) { + if (GETJOCTET(data[2]) != 0) return; + if (GETJOCTET(data[3]) != 0x2A) return; + } else { + if (GETJOCTET(data[3]) != 0) return; + if (GETJOCTET(data[2]) != 0x2A) return; + } + + /* Get first IFD offset (offset to IFD0) */ + if (is_motorola) { + if (GETJOCTET(data[4]) != 0) return; + if (GETJOCTET(data[5]) != 0) return; + firstoffset = GETJOCTET(data[6]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[7]); + } else { + if (GETJOCTET(data[7]) != 0) return; + if (GETJOCTET(data[6]) != 0) return; + firstoffset = GETJOCTET(data[5]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[4]); + } + if (firstoffset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this IFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[firstoffset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset+1]); + } else { + number_of_tags = GETJOCTET(data[firstoffset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset]); + } + if (number_of_tags == 0) return; + firstoffset += 2; + + /* Search for ExifSubIFD offset Tag in IFD0 */ + for (;;) { + if (firstoffset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[firstoffset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset+1]); + } else { + tagnum = GETJOCTET(data[firstoffset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset]); + } + if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ + if (--number_of_tags == 0) return; + firstoffset += 12; + } + + /* Get the ExifSubIFD offset */ + if (is_motorola) { + if (GETJOCTET(data[firstoffset+8]) != 0) return; + if (GETJOCTET(data[firstoffset+9]) != 0) return; + offset = GETJOCTET(data[firstoffset+10]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+11]); + } else { + if (GETJOCTET(data[firstoffset+11]) != 0) return; + if (GETJOCTET(data[firstoffset+10]) != 0) return; + offset = GETJOCTET(data[firstoffset+9]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+8]); + } + if (offset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this SubIFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[offset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset+1]); + } else { + number_of_tags = GETJOCTET(data[offset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset]); + } + if (number_of_tags < 2) return; + offset += 2; + + /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ + do { + if (offset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[offset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset+1]); + } else { + tagnum = GETJOCTET(data[offset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset]); + } + if (tagnum == 0xA002 || tagnum == 0xA003) { + if (tagnum == 0xA002) + new_value = new_width; /* ExifImageWidth Tag */ + else + new_value = new_height; /* ExifImageHeight Tag */ + if (is_motorola) { + data[offset+2] = 0; /* Format = unsigned long (4 octets) */ + data[offset+3] = 4; + data[offset+4] = 0; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 1; + data[offset+8] = 0; + data[offset+9] = 0; + data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+11] = (JOCTET)(new_value & 0xFF); + } else { + data[offset+2] = 4; /* Format = unsigned long (4 octets) */ + data[offset+3] = 0; + data[offset+4] = 1; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 0; + data[offset+8] = (JOCTET)(new_value & 0xFF); + data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+10] = 0; + data[offset+11] = 0; + } + } + offset += 12; + } while (--number_of_tags); +} + + +/* Adjust output image parameters as needed. + * + * This must be called after jpeg_copy_critical_parameters() + * and before jpeg_write_coefficients(). + * + * The return value is the set of virtual coefficient arrays to be written + * (either the ones allocated by jtransform_request_workspace, or the + * original source data arrays). The caller will need to pass this value + * to jpeg_write_coefficients(). + */ + +GLOBAL(jvirt_barray_ptr *) +jtransform_adjust_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + /* If force-to-grayscale is requested, adjust destination parameters */ + if (info->force_grayscale) { + /* First, ensure we have YCC or grayscale data, and that the source's + * Y channel is full resolution. (No reasonable person would make Y + * be less than full resolution, so actually coping with that case + * isn't worth extra code space. But we check it to avoid crashing.) + */ + if ((((dstinfo->jpeg_color_space == JCS_YCbCr || + dstinfo->jpeg_color_space == JCS_BG_YCC) && + dstinfo->num_components == 3) || + (dstinfo->jpeg_color_space == JCS_GRAYSCALE && + dstinfo->num_components == 1)) && + srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && + srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { + /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed + * properly. Among other things, it sets the target h_samp_factor & + * v_samp_factor to 1, which typically won't match the source. + * We have to preserve the source's quantization table number, however. + */ + int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; + jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); + dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; + } else { + /* Sorry, can't do it */ + ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); + } + } else if (info->num_components == 1) { + /* For a single-component source, we force the destination sampling factors + * to 1x1, with or without force_grayscale. This is useful because some + * decoders choke on grayscale images with other sampling factors. + */ + dstinfo->comp_info[0].h_samp_factor = 1; + dstinfo->comp_info[0].v_samp_factor = 1; + } + + /* Correct the destination's image dimensions as necessary + * for rotate/flip, resize, and crop operations. + */ + dstinfo->jpeg_width = info->output_width; + dstinfo->jpeg_height = info->output_height; + + /* Transpose destination image parameters, adjust quantization */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + transpose_critical_parameters(dstinfo); + break; + case JXFORM_DROP: + if (info->drop_width != 0 && info->drop_height != 0) + adjust_quant(srcinfo, src_coef_arrays, + info->drop_ptr, info->drop_coef_arrays, + info->trim, dstinfo); + break; + default: + break; + } + + /* Adjust Exif properties */ + if (srcinfo->marker_list != NULL && + srcinfo->marker_list->marker == JPEG_APP0+1 && + srcinfo->marker_list->data_length >= 6 && + GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && + GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && + GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && + GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && + GETJOCTET(srcinfo->marker_list->data[4]) == 0 && + GETJOCTET(srcinfo->marker_list->data[5]) == 0) { + /* Suppress output of JFIF marker */ + dstinfo->write_JFIF_header = FALSE; + /* Adjust Exif image parameters */ + if (dstinfo->jpeg_width != srcinfo->image_width || + dstinfo->jpeg_height != srcinfo->image_height) + /* Align data segment to start of TIFF structure for parsing */ + adjust_exif_parameters(srcinfo->marker_list->data + 6, + srcinfo->marker_list->data_length - 6, + dstinfo->jpeg_width, dstinfo->jpeg_height); + } + + /* Return the appropriate output data set */ + if (info->workspace_coef_arrays != NULL) + return info->workspace_coef_arrays; + return src_coef_arrays; +} + + +/* Execute the actual transformation, if any. + * + * This must be called *after* jpeg_write_coefficients, because it depends + * on jpeg_write_coefficients to have computed subsidiary values such as + * the per-component width and height fields in the destination object. + * + * Note that some transformations will modify the source data arrays! + */ + +GLOBAL(void) +jtransform_execute_transform (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; + + /* Note: conditions tested here should match those in switch statement + * in jtransform_request_workspace() + */ + switch (info->transform) { + case JXFORM_NONE: + if (info->output_width > srcinfo->output_width || + info->output_height > srcinfo->output_height) { + if (info->output_width > srcinfo->output_width && + info->crop_width_set == JCROP_REFLECT) + do_crop_ext_reflect(srcinfo, dstinfo, + info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else if (info->output_width > srcinfo->output_width && + info->crop_width_set == JCROP_FORCE) + do_crop_ext_flat(srcinfo, dstinfo, + info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_crop_ext_zero(srcinfo, dstinfo, + info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + } else if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_FLIP_H: + if (info->y_crop_offset != 0) + do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays); + break; + case JXFORM_FLIP_V: + do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSPOSE: + do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSVERSE: + do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_90: + do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_180: + do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_270: + do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_WIPE: + if (info->crop_width_set == JCROP_REFLECT && + info->y_crop_offset == 0 && info->drop_height == + (JDIMENSION) jdiv_round_up + ((long) info->output_height, (long) info->iMCU_sample_height) && + (info->x_crop_offset == 0 || + info->x_crop_offset + info->drop_width == + (JDIMENSION) jdiv_round_up + ((long) info->output_width, (long) info->iMCU_sample_width))) + do_reflect(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays, info->drop_width, info->drop_height); + else if (info->crop_width_set == JCROP_FORCE) + do_flatten(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, info->drop_width, info->drop_height); + else + do_wipe(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, info->drop_width, info->drop_height); + break; + case JXFORM_DROP: + if (info->drop_width != 0 && info->drop_height != 0) + do_drop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, info->drop_ptr, info->drop_coef_arrays, + info->drop_width, info->drop_height); + break; + } +} + +/* jtransform_perfect_transform + * + * Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + * + * Inputs: + * image_width, image_height: source image dimensions. + * MCU_width, MCU_height: pixel dimensions of MCU. + * transform: transformation identifier. + * Parameter sources from initialized jpeg_struct + * (after reading source header): + * image_width = cinfo.image_width + * image_height = cinfo.image_height + * MCU_width = cinfo.max_h_samp_factor * cinfo.block_size + * MCU_height = cinfo.max_v_samp_factor * cinfo.block_size + * Result: + * TRUE = perfect transformation possible + * FALSE = perfect transformation not possible + * (may use custom action then) + */ + +GLOBAL(boolean) +jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform) +{ + boolean result = TRUE; /* initialize TRUE */ + + switch (transform) { + case JXFORM_FLIP_H: + case JXFORM_ROT_270: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + break; + case JXFORM_FLIP_V: + case JXFORM_ROT_90: + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + case JXFORM_TRANSVERSE: + case JXFORM_ROT_180: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + default: + break; + } + + return result; +} + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* Setup decompression object to save desired markers in memory. + * This must be called before jpeg_read_header() to have the desired effect. + */ + +GLOBAL(void) +jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) +{ +#ifdef SAVE_MARKERS_SUPPORTED + int m; + + /* Save comments except under NONE option */ + if (option != JCOPYOPT_NONE) { + jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); + } + /* Save all types of APPn markers iff ALL option */ + if (option == JCOPYOPT_ALL) { + for (m = 0; m < 16; m++) + jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); + } +#endif /* SAVE_MARKERS_SUPPORTED */ +} + +/* Copy markers saved in the given source object to the destination object. + * This should be called just after jpeg_start_compress() or + * jpeg_write_coefficients(). + * Note that those routines will have written the SOI, and also the + * JFIF APP0 or Adobe APP14 markers if selected. + */ + +GLOBAL(void) +jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option) +{ + jpeg_saved_marker_ptr marker; + + /* In the current implementation, we don't actually need to examine the + * option flag here; we just copy everything that got saved. + * But to avoid confusion, we do not output JFIF and Adobe APP14 markers + * if the encoder library already wrote one. + */ + for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { + if (dstinfo->write_JFIF_header && + marker->marker == JPEG_APP0 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x4A && + GETJOCTET(marker->data[1]) == 0x46 && + GETJOCTET(marker->data[2]) == 0x49 && + GETJOCTET(marker->data[3]) == 0x46 && + GETJOCTET(marker->data[4]) == 0) + continue; /* reject duplicate JFIF */ + if (dstinfo->write_Adobe_marker && + marker->marker == JPEG_APP0+14 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x41 && + GETJOCTET(marker->data[1]) == 0x64 && + GETJOCTET(marker->data[2]) == 0x6F && + GETJOCTET(marker->data[3]) == 0x62 && + GETJOCTET(marker->data[4]) == 0x65) + continue; /* reject duplicate Adobe */ +#ifdef NEED_FAR_POINTERS + /* We could use jpeg_write_marker if the data weren't FAR... */ + { + unsigned int i; + jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); + for (i = 0; i < marker->data_length; i++) + jpeg_write_m_byte(dstinfo, marker->data[i]); + } +#else + jpeg_write_marker(dstinfo, marker->marker, + marker->data, marker->data_length); +#endif + } +} diff --git a/jpeg-9d/transupp.h b/jpeg-9d/transupp.h new file mode 100644 index 0000000..a8ba16a --- /dev/null +++ b/jpeg-9d/transupp.h @@ -0,0 +1,230 @@ +/* + * transupp.h + * + * Copyright (C) 1997-2019, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the current JPEG format: the + * upper left corner of the selected region must fall on an iMCU boundary. If + * this does not hold for the given crop parameters, we silently move the upper + * left corner up and/or left to make it so, simultaneously increasing the + * region dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * The adjustment of the region dimensions may be optionally disabled. + * + * A complementary lossless-wipe option is provided to discard (gray out) data + * inside a given image region while losslessly preserving what is outside. + * Another option is lossless-drop, which replaces data at a given image + * position by another image. Both source images must have the same + * subsampling values. It is best if they also have the same quantization, + * otherwise quantization adaption occurs. The trim option can be used with + * the drop option to requantize the drop file to the source file. + * + * We also provide a lossless-resize option, which is kind of a lossless-crop + * operation in the DCT coefficient block domain - it discards higher-order + * coefficients and losslessly preserves lower-order coefficients of a + * sub-block. + * + * Rotate/flip transform, resize, and crop can be requested together in a + * single invocation. The crop is applied last --- that is, the crop region + * is specified in terms of the destination image after transform/resize. + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jtransform_perfect_transform jTrPerfect +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270, /* 270-degree clockwise (or 90 ccw) */ + JXFORM_WIPE, /* wipe */ + JXFORM_DROP /* drop */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive or negative for xoffset or yoffset, + * positive or force or reflect for width or height. + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG, + JCROP_FORCE, + JCROP_REFLECT +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean perfect; /* if TRUE, fail if partial MCUs are requested */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop or wipe source image, or drop */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; /* (force disables adjustment) */ + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; /* (force disables adjustment) */ + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ + + /* Drop parameters: set by caller for drop request */ + j_decompress_ptr drop_ptr; + jvirt_barray_ptr * drop_coef_arrays; + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + JDIMENSION drop_width; /* drop/wipe dimensions measured in iMCUs */ + JDIMENSION drop_height; + int iMCU_sample_width; /* destination iMCU size */ + int iMCU_sample_height; +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); +/* Request any required workspace */ +EXTERN(boolean) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transform + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + */ +EXTERN(boolean) jtransform_perfect_transform + JPP((JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform)); + +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option)); diff --git a/jpeg-9d/usage.txt b/jpeg-9d/usage.txt new file mode 100644 index 0000000..b20484b --- /dev/null +++ b/jpeg-9d/usage.txt @@ -0,0 +1,709 @@ +USAGE instructions for the Independent JPEG Group's JPEG software +================================================================= + +This file describes usage of the JPEG conversion programs cjpeg and djpeg, +as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See +the other documentation files if you wish to use the JPEG library within +your own programs.) + +If you are on a Unix machine you may prefer to read the Unix-style manual +pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. + + +INTRODUCTION + +These programs implement JPEG image encoding, decoding, and transcoding. +JPEG (pronounced "jay-peg") is a standardized compression method for +full-color and grayscale images. + + +GENERAL USAGE + +We provide two programs, cjpeg to compress an image file into JPEG format, +and djpeg to decompress a JPEG file back into a conventional image format. + +On Unix-like systems, you say: + cjpeg [switches] [imagefile] >jpegfile +or + djpeg [switches] [jpegfile] >imagefile +The programs read the specified input file, or standard input if none is +named. They always write to standard output (with trace/error messages to +standard error). These conventions are handy for piping images between +programs. + +On most non-Unix systems, you say: + cjpeg [switches] imagefile jpegfile +or + djpeg [switches] jpegfile imagefile +i.e., both the input and output files are named on the command line. This +style is a little more foolproof, and it loses no functionality if you don't +have pipes. (You can get this style on Unix too, if you prefer, by defining +TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.) + +You can also say: + cjpeg [switches] -outfile jpegfile imagefile +or + djpeg [switches] -outfile imagefile jpegfile +This syntax works on all systems, so it is useful for scripts. + +The currently supported image file formats are: PPM (PBMPLUS color format), +PGM (PBMPLUS grayscale format), BMP, GIF, Targa, and RLE (Utah Raster Toolkit +format). (RLE is supported only if the URT library is available, which it +isn't on most non-Unix systems.) cjpeg recognizes the input image format +automatically, with the exception of some Targa-format files. You have to +tell djpeg which format to generate. + +JPEG files are in the standard JFIF file format. There are other, +less widely used JPEG-based file formats, but we don't support them. + +All switch names may be abbreviated; for example, -grayscale may be written +-gray or -gr. Most of the "basic" switches can be abbreviated to as little as +one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). +British spellings are also accepted (e.g., -greyscale), though for brevity +these are not mentioned below. + + +CJPEG DETAILS + +The basic command line switches for cjpeg are: + + -quality N[,...] Scale quantization tables to adjust image quality. + Quality is 0 (worst) to 100 (best); default is 75. + (See below for more info.) + + -grayscale Create monochrome JPEG file from color input. + Be sure to use this switch when compressing a grayscale + BMP or GIF file, because cjpeg isn't bright enough to + notice whether a BMP or GIF file uses only shades of + gray. By saying -grayscale, you'll get a smaller + JPEG file that takes less time to process. + + -rgb Create RGB JPEG file. + Using this switch suppresses the conversion from RGB + colorspace input to the default YCbCr JPEG colorspace. + You can use this switch in combination with the + -block N switch (see below) for lossless JPEG coding. + See also the -rgb1 switch below. + + -optimize Perform optimization of entropy encoding parameters. + Without this, default encoding parameters are used. + -optimize usually makes the JPEG file a little smaller, + but cjpeg runs somewhat slower and needs much more + memory. Image quality and speed of decompression are + unaffected by -optimize. + + -progressive Create progressive JPEG file (see below). + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all N from 1 to + 16, where M is the destination DCT size, which is 8 by + default (see -block N switch below). + + -targa Input file is Targa format. Targa files that contain + an "identification" field will not be automatically + recognized by cjpeg; for such files you must specify + -targa to make cjpeg treat the input as Targa format. + For most Targa files, you won't need this switch. + +The -quality switch lets you trade off compressed file size against quality of +the reconstructed image: the higher the quality setting, the larger the JPEG +file, and the closer the output image will be to the original input. Normally +you want to use the lowest quality setting (smallest file) that decompresses +into something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at -quality 75, then go up 5 or 10 +counts at a time until you are happy with the output image. (The optimal +setting will vary from one image to another.) + +-quality 100 will generate a quantization table of all 1's, minimizing loss +in the quantization step (but there is still information loss in subsampling, +as well as roundoff error). This setting is mainly of interest for +experimental purposes. Quality values above about 95 are NOT recommended for +normal use; the compressed file size goes up dramatically for hardly any gain +in output image quality. + +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try -quality 2 (or so) for some +amusing Cubist effects. (Note: quality values below about 25 generate 2-byte +quantization tables, which are considered optional in the JPEG standard. +cjpeg emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use -baseline +if you need to ensure compatibility at low quality values.) + +The -quality option has been extended in IJG version 7 for support of separate +quality settings for luminance and chrominance (or in general, for every +provided quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the -quality ratings refer to the quantization table slots, and that +the last value is replicated if there are more q-table slots than parameters. +The default q-table slots are 0 for luminance and 1 for chrominance with +default tables as given in the JPEG standard. This is compatible with the old +behaviour in case that only one parameter is given, which is then used for +both luminance and chrominance (slots 0 and 1). More or custom quantization +tables can be set with -qtables and assigned to components with -qslots +parameter (see the "wizard" switches below). +CAUTION: You must explicitly add -sample 1x1 for efficient separate color +quality selection, since the default value used by library is 2x2! + +The -progressive switch creates a "progressive JPEG" file. In this type of +JPEG file, the data is stored in multiple scans of increasing quality. If the +file is being transmitted over a slow communications link, the decoder can use +the first scan to display a low-quality image very quickly, and can then +improve the display with each subsequent scan. The final image is exactly +equivalent to a standard JPEG file of the same quality setting, and the total +file size is about the same --- often a little smaller. + +Switches for advanced users: + + -arithmetic Use arithmetic coding. + CAUTION: arithmetic coded JPEG is not yet widely + implemented, so many decoders will be unable to + view an arithmetic coded JPEG file at all. + + -block N Set DCT block size. All N from 1 to 16 are possible. + Default is 8 (baseline format). + Larger values produce higher compression, + smaller values produce higher quality + (exact DCT stage possible with 1 or 2; with the + default quality of 75 and default Luminance qtable + the DCT+Quantization stage is lossless for N=1). + CAUTION: An implementation of the JPEG SmartScale + extension is required for this feature. SmartScale + enabled JPEG is not yet widely implemented, so many + decoders will be unable to view a SmartScale extended + JPEG file at all. + + -rgb1 Create RGB JPEG file with reversible color transform. + Works like the -rgb switch (see above) and inserts a + simple reversible color transform into the processing + which significantly improves the compression. + Use this switch in combination with the -block N + switch (see above) for lossless JPEG coding. + CAUTION: A decoder with inverse color transform + support is required for this feature. Reversible + color transform support is not yet widely implemented, + so many decoders will be unable to view a reversible + color transformed JPEG file at all. + + -bgycc Create big gamut YCC JPEG file. + In this type of encoding the color difference + components are quantized further by a factor of 2 + compared to the normal Cb/Cr values, thus creating + space to allow larger color values with higher + saturation than the normal gamut limits to be encoded. + In order to compensate for the loss of color fidelity + compared to a normal YCC encoded file, the color + quantization tables can be adjusted accordingly. + For example, cjpeg -bgycc -quality 80,90 will give + similar results as cjpeg -quality 80. + CAUTION: For correct decompression a decoder with big + gamut YCC support (JFIF version 2) is required. + An old decoder may or may not display a big gamut YCC + encoded JPEG file, depending on JFIF version check + and corresponding warning/error configuration. + In case of a granted decompression the old decoder + will display the image with half saturated colors. + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -nosmooth Don't use high-quality downsampling. + + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -restart 0 (the default) means no restart markers. + + -smooth N Smooth the input image to eliminate dithering noise. + N, ranging from 1 to 100, indicates the strength of + smoothing. 0 (the default) means no smoothing. + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + +The -restart option inserts extra markers that allow a JPEG decoder to +resynchronize after a transmission error. Without restart markers, any damage +to a compressed file will usually ruin the image from the point of the error +to the end of the image; with restart markers, the damage is usually confined +to the portion of the image up to the next restart marker. Of course, the +restart markers occupy extra space. We recommend -restart 1 for images that +will be transmitted across unreliable networks such as Usenet. + +The -smooth option filters the input to eliminate fine-scale noise. This is +often useful when converting dithered images to JPEG: a moderate smoothing +factor of 10 to 50 gets rid of dithering patterns in the input file, resulting +in a smaller JPEG file and a better-looking image. Too large a smoothing +factor will visibly blur the image, however. + +Switches for wizards: + + -baseline Force baseline-compatible quantization tables to be + generated. This clamps quantization values to 8 bits + even at low quality settings. (This switch is poorly + named, since it does not ensure that the output is + actually baseline JPEG. For example, you can use + -baseline and -progressive together.) + + -qtables file Use the quantization tables given in the specified + text file. + + -qslots N[,...] Select which quantization table to use for each color + component. + + -sample HxV[,...] Set JPEG sampling factors for each color component. + + -scans file Use the scan script given in the specified text file. + +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, DON'T USE THEM. These switches are documented +further in the file wizard.txt. + + +DJPEG DETAILS + +The basic command line switches for djpeg are: + + -colors N Reduce image to at most N colors. This reduces the + or -quantize N number of colors used in the output image, so that it + can be displayed on a colormapped display or stored in + a colormapped file format. For example, if you have + an 8-bit display, you'd need to reduce to 256 or fewer + colors. (-colors is the recommended name, -quantize + is provided only for backwards compatibility.) + + -fast Select recommended processing options for fast, low + quality output. (The default options are chosen for + highest quality output.) Currently, this is equivalent + to "-dct fast -nosmooth -onepass -dither ordered". + + -grayscale Force grayscale output even if JPEG file is color. + Useful for viewing on monochrome displays; also, + djpeg runs noticeably faster in this mode. + + -rgb Force RGB output even if JPEG file is grayscale. + This is provided to support applications that don't + want to cope with grayscale as a separate case. + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all M from 1 to + 16, where N is the source DCT size, which is 8 for + baseline JPEG. If the /N part is omitted, then M + specifies the DCT scaled size to be applied on the + given input. For baseline JPEG this is equivalent to + M/8 scaling, since the source DCT size for baseline + JPEG is 8. Scaling is handy if the image is larger + than your screen; also, djpeg runs much faster when + scaling down the output. + + -bmp Select BMP output format (Windows flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is grayscale; + otherwise, 24-bit full-color format is emitted. + + -gif Select GIF output format (LZW compressed). + Since GIF does not support more than 256 colors, + -colors 256 is assumed (unless you specify a smaller + number of colors). If you specify -fast, the default + number of colors is 216. + + -gif0 Select GIF output format (uncompressed). + Since GIF does not support more than 256 colors, + -colors 256 is assumed (unless you specify a smaller + number of colors). If you specify -fast, the default + number of colors is 216. + + -os2 Select BMP output format (OS/2 1.x flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is grayscale; + otherwise, 24-bit full-color format is emitted. + + -pnm Select PBMPLUS (PPM/PGM) output format (this is the + default format). PGM is emitted if the JPEG file is + grayscale or if -grayscale is specified; otherwise + PPM is emitted. + + -rle Select RLE output format. (Requires URT library.) + + -targa Select Targa output format. Grayscale format is + emitted if the JPEG file is grayscale or if + -grayscale is specified; otherwise, colormapped format + is emitted if -colors is specified; otherwise, 24-bit + full-color format is emitted. + +Switches for advanced users: + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -dither fs Use Floyd-Steinberg dithering in color quantization. + -dither ordered Use ordered dithering in color quantization. + -dither none Do not use dithering in color quantization. + By default, Floyd-Steinberg dithering is applied when + quantizing colors; this is slow but usually produces + the best results. Ordered dither is a compromise + between speed and quality; no dithering is fast but + usually looks awful. Note that these switches have + no effect unless color quantization is being done. + Ordered dither is only available in -onepass mode. + + -map FILE Quantize to the colors used in the specified image + file. This is useful for producing multiple files + with identical color maps, or for forcing a predefined + set of colors to be used. The FILE must be a GIF + or PPM file. This option overrides -colors and + -onepass. + + -nosmooth Don't use high-quality upsampling. + + -onepass Use one-pass instead of two-pass color quantization. + The one-pass method is faster and needs less memory, + but it produces a lower-quality image. -onepass is + ignored unless you also say -colors N. Also, + the one-pass method is always used for grayscale + output (the two-pass method is no improvement then). + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + + +HINTS FOR CJPEG + +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options +to get a satisfactory conversion. -smooth 10 or so is often helpful. + +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. + +The -optimize option to cjpeg is worth using when you are making a "final" +version for posting or archiving. It's also a win when you are using low +quality settings to make very small JPEG files; the percentage improvement +is often a lot more than it is on larger files. (At present, -optimize +mode is always selected when generating progressive JPEG files.) + + +HINTS FOR DJPEG + +To get a quick preview of an image, use the -grayscale and/or -scale switches. +"-grayscale -scale 1/8" is the fastest case. + +Several options are available that trade off image quality to gain speed. +"-fast" turns on the recommended settings. + +"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. +When producing a color-quantized image, "-onepass -dither ordered" is fast but +much lower quality than the default behavior. "-dither none" may give +acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. + +If you are fortunate enough to have very fast floating point hardware, +"-dct float" may be even faster than "-dct fast". But on most machines +"-dct float" is slower than "-dct int"; in this case it is not worth using, +because its theoretical accuracy advantage is too small to be significant +in practice. + +Two-pass color quantization requires a good deal of memory; on MS-DOS machines +it may run out of memory even with -maxmemory 0. In that case you can still +decompress, with some loss of image quality, by specifying -onepass for +one-pass quantization. + + +HINTS FOR BOTH PROGRAMS + +If more space is needed than will fit in the available main memory (as +determined by -maxmemory), temporary files will be used. (MS-DOS versions +will try to get extended or expanded memory first.) The temporary files are +often rather large: in typical cases they occupy three bytes per pixel, for +example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough +free disk space, leave out -progressive and -optimize (for cjpeg) or specify +-onepass (for djpeg). + +On MS-DOS, the temporary files are created in the directory named by the TMP +or TEMP environment variable, or in the current directory if neither of those +exist. Amiga implementations put the temp files in the directory named by +JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free +space. + +The default memory usage limit (-maxmemory) is set when the software is +compiled. If you get an "insufficient memory" error, try specifying a smaller +-maxmemory value, even -maxmemory 0 to use the absolute minimum space. You +may want to recompile with a smaller default value if this happens often. + +On machines that have "environment" variables, you can define the environment +variable JPEGMEM to set the default memory limit. The value is specified as +described for the -maxmemory switch. JPEGMEM overrides the default value +specified when the program was compiled, and itself is overridden by an +explicit -maxmemory switch. + +On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to +use. (Extended or expanded memory is also used if available.) Most +DOS-specific versions of this software do their own memory space estimation +and do not need you to specify -maxmemory. + + +JPEGTRAN + +jpegtran performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. For EXIF files and JPEG files +containing Exif data, you may prefer to use exiftran instead. + +jpegtran works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +djpeg followed by cjpeg to accomplish the same conversion. But by the same +token, jpegtran cannot perform lossy operations such as changing the image +quality. However, while the image data is losslessly transformed, metadata +can be removed. See the -copy option for specifics. + +jpegtran uses a command line syntax similar to cjpeg or djpeg. +On Unix-like systems, you say: + jpegtran [switches] [inputfile] >outputfile +On most non-Unix systems, you say: + jpegtran [switches] inputfile outputfile +where both the input and output files are JPEG files. + +To specify the coded JPEG representation used in the output file, +jpegtran accepts a subset of the switches recognized by cjpeg: + -optimize Perform optimization of entropy encoding parameters. + -progressive Create progressive JPEG file. + -arithmetic Use arithmetic coding. + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -scans file Use the scan script given in the specified text file. +See the previous discussion of cjpeg for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. + +The image can be losslessly transformed by giving one of these switches: + -flip horizontal Mirror image horizontally (left-right). + -flip vertical Mirror image vertically (top-bottom). + -rotate 90 Rotate image 90 degrees clockwise. + -rotate 180 Rotate image 180 degrees. + -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). + -transpose Transpose image (across UL-to-LR axis). + -transverse Transverse transpose (across UR-to-LL axis). + +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. + +jpegtran's default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. + +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the -trim switch: + -trim Drop non-transformable edge blocks. +Obviously, a transformation with -trim is not reversible, so strictly speaking +jpegtran with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by +"-rot 180 -trim" trims both edges. + +If you are only interested in perfect transformation, add the -perfect switch: + -perfect Fails with an error if the transformation is not + perfect. +For example you may want to do + jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg +to do a perfect rotation if available or an approximated one if not. + +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the +region dimensions to keep the lower right crop corner unchanged. (Thus, the +output image covers at least the requested region, but may cover more.) +The adjustment of the region dimensions may be optionally disabled by +attaching an 'f' character ("force") to the width or height number. + +The image can be losslessly cropped by giving the switch: + -crop WxH+X+Y Crop to a rectangular subarea of width W, height H + starting at point X,Y. + +Crop extension: The width or height parameters can be made larger than the +source image. In this case the extra area is filled in with zero (neutral +gray). A larger width parameter has two more options: Attaching an 'f' +character ("flatten") to the width number will fill in the extra area with +the DC of the adjacent block, instead of gray out. Attaching an 'r' +character ("reflect") to the width number will fill in the extra area with +repeated reflections of the source region, instead of gray out. + +A complementary lossless-wipe option is provided to discard (gray out) data +inside a given image region while losslessly preserving what is outside: + -wipe WxH+X+Y Wipe (gray out) a rectangular subarea of + width W, height H starting at point X,Y. + +Attaching an 'f' character ("flatten") to the width number will fill the +region with the average of adjacent blocks, instead of gray out. In case +the wipe region and outside area form two horizontally adjacent rectangles, +attaching an 'r' character ("reflect") to the width number will fill the +region with repeated reflections of the outside area, instead of gray out. + +Another option is lossless-drop, which replaces data at a given image +position by another image: + -drop +X+Y filename Drop another image + +Both source images must have the same subsampling values. It is best if +they also have the same quantization, otherwise quantization adaption occurs. +The trim option can be used with the drop option to requantize the drop file +to the source file. + +Other not-strictly-lossless transformation switches are: + + -grayscale Force grayscale output. +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) + + -scale M/N Scale the output image by a factor M/N. +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. CAUTION: An implementation of the JPEG SmartScale +extension is required for this feature. SmartScale enabled JPEG is not yet +widely implemented, so many decoders will be unable to view a SmartScale +extended JPEG file at all. + +jpegtran also recognizes these switches that control what to do with "extra" +markers, such as comment blocks: + -copy none Copy no extra markers from source file. + This setting suppresses all comments + and other metadata in the source file. + -copy comments Copy only comment markers. + This setting copies comments from the source file, + but discards any other metadata. + -copy all Copy all extra markers. This setting preserves + metadata found in the source file, such as JFIF + thumbnails, Exif data, and Photoshop settings. + In some files these extra markers can be sizable. + Note that this option will copy thumbnails as-is; + they will not be transformed. +The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, +jpegtran always did the equivalent of -copy none.) + +Additional switches recognized by jpegtran are: + -outfile filename + -maxmemory N + -verbose + -debug +These work the same as in cjpeg or djpeg. + + +THE COMMENT UTILITIES + +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. + +We provide two utility programs to display COM block contents and add COM +blocks to a JPEG file. + +rdjpgcom searches a JPEG file and prints the contents of any COM blocks on +standard output. The command line syntax is + rdjpgcom [-raw] [-verbose] [inputfilename] +The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable +characters in comments, which are normally escaped for security reasons. +The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG +image dimensions. If you omit the input file name from the command line, +the JPEG file is read from standard input. (This may not work on some +operating systems, if binary data can't be read from stdin.) + +wrjpgcom adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks, but you +can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG +file; it does not modify the input file. DO NOT try to overwrite the input +file by directing wrjpgcom's output back into it; on most systems this will +just destroy your file. + +The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like +systems, it is + wrjpgcom [switches] [inputfilename] +The output file is written to standard output. The input file comes from +the named file, or from standard input if no input file is named. + +On most non-Unix systems, the syntax is + wrjpgcom [switches] inputfilename outputfilename +where both input and output file names must be given explicitly. + +wrjpgcom understands three switches: + -replace Delete any existing COM blocks from the file. + -comment "Comment text" Supply new COM text on command line. + -cfile name Read text for new COM block from named file. +(Switch names can be abbreviated.) If you have only one line of comment text +to add, you can provide it on the command line with -comment. The comment +text must be surrounded with quotes so that it is treated as a single +argument. Longer comments can be read from a text file. + +If you give neither -comment nor -cfile, then wrjpgcom will read the comment +text from standard input. (In this case an input image file name MUST be +supplied, so that the source JPEG file comes from somewhere else.) You can +enter multiple lines, up to 64KB worth. Type an end-of-file indicator +(usually control-D or control-Z) to terminate the comment text entry. + +wrjpgcom will not add a COM block if the provided comment string is empty. +Therefore -replace -comment "" can be used to delete all COM blocks from a +file. + +These utility programs do not depend on the IJG JPEG library. In +particular, the source code for rdjpgcom is intended as an illustration of +the minimum amount of code required to parse a JPEG file header correctly. diff --git a/jpeg-9d/wizard.txt b/jpeg-9d/wizard.txt new file mode 100644 index 0000000..54170b2 --- /dev/null +++ b/jpeg-9d/wizard.txt @@ -0,0 +1,211 @@ +Advanced usage instructions for the Independent JPEG Group's JPEG software +========================================================================== + +This file describes cjpeg's "switches for wizards". + +The "wizard" switches are intended for experimentation with JPEG by persons +who are reasonably knowledgeable about the JPEG standard. If you don't know +what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files +with worse image quality and/or poorer compression than you'd get from the +default settings. Furthermore, these switches must be used with caution +when making files intended for general use, because not all JPEG decoders +will support unusual JPEG parameter settings. + + +Quantization Table Adjustment +----------------------------- + +Ordinarily, cjpeg starts with a default set of tables (the same ones given +as examples in the JPEG standard) and scales them up or down according to +the -quality setting. The details of the scaling algorithm can be found in +jcparam.c. At very low quality settings, some quantization table entries +can get scaled up to values exceeding 255. Although 2-byte quantization +values are supported by the IJG software, this feature is not in baseline +JPEG and is not supported by all implementations. If you need to ensure +wide compatibility of low-quality files, you can constrain the scaled +quantization values to no more than 255 by giving the -baseline switch. +Note that use of -baseline will result in poorer quality for the same file +size, since more bits than necessary are expended on higher AC coefficients. + +You can substitute a different set of quantization values by using the +-qtables switch: + + -qtables file Use the quantization tables given in the named file. + +The specified file should be a text file containing decimal quantization +values. The file should contain one to four tables, each of 64 elements. +The tables are implicitly numbered 0,1,etc. in order of appearance. Table +entries appear in normal array order (NOT in the zigzag order in which they +will be stored in the JPEG file). + +Quantization table files are free format, in that arbitrary whitespace can +appear between numbers. Also, comments can be included: a comment starts +with '#' and extends to the end of the line. Here is an example file that +duplicates the default quantization tables: + + # Quantization tables given in JPEG spec, section K.1 + + # This is table 0 (the luminance table): + 16 11 10 16 24 40 51 61 + 12 12 14 19 26 58 60 55 + 14 13 16 24 40 57 69 56 + 14 17 22 29 51 87 80 62 + 18 22 37 56 68 109 103 77 + 24 35 55 64 81 104 113 92 + 49 64 78 87 103 121 120 101 + 72 92 95 98 112 100 103 99 + + # This is table 1 (the chrominance table): + 17 18 24 47 99 99 99 99 + 18 21 26 66 99 99 99 99 + 24 26 56 99 99 99 99 99 + 47 66 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + +If the -qtables switch is used without -quality, then the specified tables +are used exactly as-is. If both -qtables and -quality are used, then the +tables taken from the file are scaled in the same fashion that the default +tables would be scaled for that quality setting. If -baseline appears, then +the quantization values are constrained to the range 1-255. + +By default, cjpeg will use quantization table 0 for luminance components and +table 1 for chrominance components. To override this choice, use the -qslots +switch: + + -qslots N[,...] Select which quantization table to use for + each color component. + +The -qslots switch specifies a quantization table number for each color +component, in the order in which the components appear in the JPEG SOF marker. +For example, to create a separate table for each of Y,Cb,Cr, you could +provide a -qtables file that defines three quantization tables and say +"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color +components, then the last table number is repeated as necessary. + + +Sampling Factor Adjustment +-------------------------- + +By default, cjpeg uses 2:1 horizontal and vertical downsampling when +compressing YCbCr data, and no downsampling for all other color spaces. +You can override this default with the -sample switch: + + -sample HxV[,...] Set JPEG sampling factors for each color + component. + +The -sample switch specifies the JPEG sampling factors for each color +component, in the order in which they appear in the JPEG SOF marker. +If you specify fewer HxV pairs than there are components, the remaining +components are set to 1x1 sampling. For example, the default YCbCr setting +is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to +"-sample 2x2". + +There are still some JPEG decoders in existence that support only 2x1 +sampling (also called 4:2:2 sampling). Compatibility with such decoders can +be achieved by specifying "-sample 2x1". This is not recommended unless +really necessary, since it increases file size and encoding/decoding time +with very little quality gain. + + +Multiple Scan / Progression Control +----------------------------------- + +By default, cjpeg emits a single-scan sequential JPEG file. The +-progressive switch generates a progressive JPEG file using a default series +of progression parameters. You can create multiple-scan sequential JPEG +files or progressive JPEG files with custom progression parameters by using +the -scans switch: + + -scans file Use the scan sequence given in the named file. + +The specified file should be a text file containing a "scan script". +The script specifies the contents and ordering of the scans to be emitted. +Each entry in the script defines one scan. A scan definition specifies +the components to be included in the scan, and for progressive JPEG it also +specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan +definitions are separated by semicolons (';'). A semicolon after the last +scan definition is optional. + +Each scan definition contains one to four component indexes, optionally +followed by a colon (':') and the four progressive-JPEG parameters. The +component indexes denote which color component(s) are to be transmitted in +the scan. Components are numbered in the order in which they appear in the +JPEG SOF marker, with the first component being numbered 0. (Note that these +indexes are not the "component ID" codes assigned to the components, just +positional indexes.) + +The progression parameters for each scan are: + Ss Zigzag index of first coefficient included in scan + Se Zigzag index of last coefficient included in scan + Ah Zero for first scan of a coefficient, else Al of prior scan + Al Successive approximation low bit position for scan +If the progression parameters are omitted, the values 0,63,0,0 are used, +producing a sequential JPEG file. cjpeg automatically determines whether +the script represents a progressive or sequential file, by observing whether +Ss and Se values other than 0 and 63 appear. (The -progressive switch is +not needed to specify this; in fact, it is ignored when -scans appears.) +The scan script must meet the JPEG restrictions on progression sequences. +(cjpeg checks that the spec's requirements are obeyed.) + +Scan script files are free format, in that arbitrary whitespace can appear +between numbers and around punctuation. Also, comments can be included: a +comment starts with '#' and extends to the end of the line. For additional +legibility, commas or dashes can be placed between values. (Actually, any +single punctuation character other than ':' or ';' can be inserted.) For +example, the following two scan definitions are equivalent: + 0 1 2: 0 63 0 0; + 0,1,2 : 0-63, 0,0 ; + +Here is an example of a scan script that generates a partially interleaved +sequential JPEG file: + + 0; # Y only in first scan + 1 2; # Cb and Cr in second scan + +Here is an example of a progressive scan script using only spectral selection +(no successive approximation): + + # Interleaved DC scan for Y,Cb,Cr: + 0,1,2: 0-0, 0, 0 ; + # AC scans: + 0: 1-2, 0, 0 ; # First two Y AC coefficients + 0: 3-5, 0, 0 ; # Three more + 1: 1-63, 0, 0 ; # All AC coefficients for Cb + 2: 1-63, 0, 0 ; # All AC coefficients for Cr + 0: 6-9, 0, 0 ; # More Y coefficients + 0: 10-63, 0, 0 ; # Remaining Y coefficients + +Here is an example of a successive-approximation script. This is equivalent +to the default script used by "cjpeg -progressive" for YCbCr images: + + # Initial DC scan for Y,Cb,Cr (lowest bit not sent) + 0,1,2: 0-0, 0, 1 ; + # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits: + 0: 1-5, 0, 2 ; + # Send all Cr,Cb AC coefficients, minus lowest bit: + # (chroma data is usually too small to be worth subdividing further; + # but note we send Cr first since eye is least sensitive to Cb) + 2: 1-63, 0, 1 ; + 1: 1-63, 0, 1 ; + # Send remaining Y AC coefficients, minus 2 lowest bits: + 0: 6-63, 0, 2 ; + # Send next-to-lowest bit of all Y AC coefficients: + 0: 1-63, 2, 1 ; + # At this point we've sent all but the lowest bit of all coefficients. + # Send lowest bit of DC coefficients + 0,1,2: 0-0, 1, 0 ; + # Send lowest bit of AC coefficients + 2: 1-63, 1, 0 ; + 1: 1-63, 1, 0 ; + # Y AC lowest bit scan is last; it's usually the largest scan + 0: 1-63, 1, 0 ; + +It may be worth pointing out that this script is tuned for quality settings +of around 50 to 75. For lower quality settings, you'd probably want to use +a script with fewer stages of successive approximation (otherwise the +initial scans will be really bad). For higher quality settings, you might +want to use more stages of successive approximation (so that the initial +scans are not too large). diff --git a/jpeg-9d/wrbmp.c b/jpeg-9d/wrbmp.c new file mode 100644 index 0000000..bed699f --- /dev/null +++ b/jpeg-9d/wrbmp.c @@ -0,0 +1,437 @@ +/* + * wrbmp.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2017-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in Microsoft "BMP" + * format (MS Windows 3.x and OS/2 1.x flavors). + * Either 8-bit colormapped or 24-bit full-color format can be written. + * No compression is supported. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * This code contributed by James Arthur Boucher. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef BMP_SUPPORTED + + +/* + * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. + * This is not yet implemented. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * Since BMP stores scanlines bottom-to-top, we have to invert the image + * from JPEG's top-to-bottom order. To do this, we save the outgoing data + * in a virtual array during put_pixel_row calls, then actually emit the + * BMP file during finish_output. The virtual array contains one JSAMPLE per + * pixel if the output is grayscale or colormapped, three if it is full color. + */ + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + boolean is_os2; /* saves the OS2 format request flag */ + + jvirt_sarray_ptr whole_image; /* needed to reverse row order */ + JDIMENSION data_width; /* JSAMPLEs per row */ + JDIMENSION row_width; /* physical width of one row in the BMP file */ + int pad_bytes; /* number of padding bytes needed per row */ + JDIMENSION cur_output_row; /* next row# to write to virtual array */ +} bmp_dest_struct; + +typedef bmp_dest_struct * bmp_dest_ptr; + + +/* Forward declarations */ +LOCAL(void) write_colormap + JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest, + int map_colors, int map_entry_size)); + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* This version is for writing 24-bit pixels */ +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + int pad; + + /* Access next row in virtual array */ + outptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + dest->whole_image, dest->cur_output_row, (JDIMENSION) 1, TRUE); + dest->cur_output_row++; + + /* Transfer data. Note destination values must be in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = dest->pub.buffer[0]; + for (col = cinfo->output_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + outptr += 3; + } + + /* Zero out the pad bytes. */ + pad = dest->pad_bytes; + while (--pad >= 0) + *outptr++ = 0; +} + +METHODDEF(void) +put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* This version is for grayscale OR quantized color output */ +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + int pad; + + /* Access next row in virtual array */ + outptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + dest->whole_image, dest->cur_output_row, (JDIMENSION) 1, TRUE); + dest->cur_output_row++; + + /* Transfer data. */ + inptr = dest->pub.buffer[0]; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = *inptr++; /* can omit GETJSAMPLE() safely */ + } + + /* Zero out the pad bytes. */ + pad = dest->pad_bytes; + while (--pad >= 0) + *outptr++ = 0; +} + + +/* + * Startup: normally writes the file header. + * In this module we may as well postpone everything until finish_output. + */ + +METHODDEF(void) +start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* no work here */ +} + + +/* + * Finish up at the end of the file. + * + * Here is where we really output the BMP file. + * + * First, routines to write the Windows and OS/2 variants of the file header. + */ + +LOCAL(void) +write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) +/* Write a Windows-style BMP file header, including colormap if needed */ +{ + char bmpfileheader[14]; + char bmpinfoheader[40]; +#define PUT_2B(array, offset, value) \ + (array[offset] = (char) ((value) & 0xFF), \ + array[offset+1] = (char) (((value) >> 8) & 0xFF)) +#define PUT_4B(array, offset, value) \ + (array[offset] = (char) ((value) & 0xFF), \ + array[offset+1] = (char) (((value) >> 8) & 0xFF), \ + array[offset+2] = (char) (((value) >> 16) & 0xFF), \ + array[offset+3] = (char) (((value) >> 24) & 0xFF)) + INT32 headersize, bfSize; + int bits_per_pixel, cmap_entries; + + /* Compute colormap size and total file size */ + if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* Colormapped RGB */ + bits_per_pixel = 8; + cmap_entries = 256; + } else { + /* Unquantized, full color RGB */ + bits_per_pixel = 24; + cmap_entries = 0; + } + } else { + /* Grayscale output. We need to fake a 256-entry colormap. */ + bits_per_pixel = 8; + cmap_entries = 256; + } + /* File size */ + headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */ + bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; + + /* Set unused fields of header to 0 */ + MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); + MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader)); + + /* Fill the file header */ + bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ + bmpfileheader[1] = 0x4D; + PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ + /* we leave bfReserved1 & bfReserved2 = 0 */ + PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ + + /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */ + PUT_2B(bmpinfoheader, 0, 40); /* biSize */ + PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */ + PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */ + PUT_2B(bmpinfoheader, 12, 1); /* biPlanes - must be 1 */ + PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */ + /* we leave biCompression = 0, for none */ + /* we leave biSizeImage = 0; this is correct for uncompressed data */ + if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */ + PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */ + PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */ + } + PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */ + /* we leave biClrImportant = 0 */ + + if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) + ERREXIT(cinfo, JERR_FILE_WRITE); + if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40) + ERREXIT(cinfo, JERR_FILE_WRITE); + + if (cmap_entries > 0) + write_colormap(cinfo, dest, cmap_entries, 4); +} + + +LOCAL(void) +write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) +/* Write an OS2-style BMP file header, including colormap if needed */ +{ + char bmpfileheader[14]; + char bmpcoreheader[12]; + INT32 headersize, bfSize; + int bits_per_pixel, cmap_entries; + + /* Compute colormap size and total file size */ + if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* Colormapped RGB */ + bits_per_pixel = 8; + cmap_entries = 256; + } else { + /* Unquantized, full color RGB */ + bits_per_pixel = 24; + cmap_entries = 0; + } + } else { + /* Grayscale output. We need to fake a 256-entry colormap. */ + bits_per_pixel = 8; + cmap_entries = 256; + } + /* File size */ + headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */ + bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; + + /* Set unused fields of header to 0 */ + MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); + MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader)); + + /* Fill the file header */ + bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ + bmpfileheader[1] = 0x4D; + PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ + /* we leave bfReserved1 & bfReserved2 = 0 */ + PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ + + /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */ + PUT_2B(bmpcoreheader, 0, 12); /* bcSize */ + PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */ + PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */ + PUT_2B(bmpcoreheader, 8, 1); /* bcPlanes - must be 1 */ + PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */ + + if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) + ERREXIT(cinfo, JERR_FILE_WRITE); + if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12) + ERREXIT(cinfo, JERR_FILE_WRITE); + + if (cmap_entries > 0) + write_colormap(cinfo, dest, cmap_entries, 3); +} + + +/* + * Write the colormap. + * Windows uses BGR0 map entries; OS/2 uses BGR entries. + */ + +LOCAL(void) +write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest, + int map_colors, int map_entry_size) +{ + JSAMPARRAY colormap = cinfo->colormap; + int num_colors = cinfo->actual_number_of_colors; + FILE * outfile = dest->pub.output_file; + int i; + + if (colormap != NULL) { + if (cinfo->out_color_components == 3) { + /* Normal case with RGB colormap */ + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(colormap[2][i]), outfile); + putc(GETJSAMPLE(colormap[1][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } else { + /* Grayscale colormap (only happens with grayscale quantization) */ + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(colormap[0][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } + } else { + /* If no colormap, must be grayscale data. Generate a linear "map". */ + for (i = 0; i < 256; i++) { + putc(i, outfile); + putc(i, outfile); + putc(i, outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } + /* Pad colormap to ensure specified number of colormap entries */ + if (i > map_colors) + ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i); + for (; i < map_colors; i++) { + putc(CENTERJSAMPLE, outfile); + putc(CENTERJSAMPLE, outfile); + putc(CENTERJSAMPLE, outfile); + if (map_entry_size == 4) + putc(0, outfile); + } +} + + +METHODDEF(void) +finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + register FILE * outfile = dest->pub.output_file; + register JSAMPROW data_ptr; + JDIMENSION row; + register JDIMENSION col; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Write the header and colormap */ + if (dest->is_os2) + write_os2_header(cinfo, dest); + else + write_bmp_header(cinfo, dest); + + /* Write the file body from our virtual array */ + for (row = cinfo->output_height; row > 0; row--) { + if (progress != NULL) { + progress->pub.pass_counter = (long) (cinfo->output_height - row); + progress->pub.pass_limit = (long) cinfo->output_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + data_ptr = * (*cinfo->mem->access_virt_sarray) ((j_common_ptr) cinfo, + dest->whole_image, row - 1, (JDIMENSION) 1, FALSE); + for (col = dest->row_width; col > 0; col--) { + putc(GETJSAMPLE(*data_ptr), outfile); + data_ptr++; + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Make sure we wrote the output file OK */ + JFFLUSH(outfile); + if (JFERROR(outfile)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for BMP format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2) +{ + bmp_dest_ptr dest; + JDIMENSION row_width; + + /* Create module interface object, fill in method pointers */ + dest = (bmp_dest_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(bmp_dest_struct)); + dest->pub.start_output = start_output_bmp; + dest->pub.finish_output = finish_output_bmp; + dest->is_os2 = is_os2; + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + dest->pub.put_pixel_rows = put_gray_rows; + break; + case JCS_RGB: + if (cinfo->quantize_colors) + dest->pub.put_pixel_rows = put_gray_rows; + else + dest->pub.put_pixel_rows = put_pixel_rows; + break; + default: + ERREXIT(cinfo, JERR_BMP_COLORSPACE); + } + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Determine width of rows in the BMP file (padded to 4-byte boundary). */ + row_width = cinfo->output_width * cinfo->output_components; + dest->data_width = row_width; + while ((row_width & 3) != 0) row_width++; + dest->row_width = row_width; + dest->pad_bytes = (int) (row_width - dest->data_width); + + /* Allocate space for inversion array, prepare for write pass */ + dest->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + row_width, cinfo->output_height, (JDIMENSION) 1); + dest->cur_output_row = 0; + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return &dest->pub; +} + +#endif /* BMP_SUPPORTED */ diff --git a/jpeg-9d/wrgif.c b/jpeg-9d/wrgif.c new file mode 100644 index 0000000..9d472de --- /dev/null +++ b/jpeg-9d/wrgif.c @@ -0,0 +1,566 @@ +/* + * wrgif.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2015-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in GIF format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + */ + +/* + * This code is loosely based on ppmtogif from the PBMPLUS distribution + * of Feb. 1991. That file contains the following copyright notice: + * Based on GIFENCODE by David Rowley . + * Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al. + * Copyright (C) 1989 by Jef Poskanzer. + * Permission to use, copy, modify, and distribute this software and its + * documentation for any purpose and without fee is hereby granted, provided + * that the above copyright notice appear in all copies and that both that + * copyright notice and this permission notice appear in supporting + * documentation. This software is provided "as is" without express or + * implied warranty. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef GIF_SUPPORTED + + +#define MAX_LZW_BITS 12 /* maximum LZW code size (4096 symbols) */ + +typedef INT16 code_int; /* must hold -1 .. 2**MAX_LZW_BITS */ + +#define LZW_TABLE_SIZE ((code_int) 1 << MAX_LZW_BITS) + +#define HSIZE 5003 /* hash table size for 80% occupancy */ + +typedef int hash_int; /* must hold -2*HSIZE..2*HSIZE */ + +#define MAXCODE(n_bits) (((code_int) 1 << (n_bits)) - 1) + + +/* + * The LZW hash table consists of two parallel arrays: + * hash_code[i] code of symbol in slot i, or 0 if empty slot + * hash_value[i] symbol's value; undefined if empty slot + * where slot values (i) range from 0 to HSIZE-1. The symbol value is + * its prefix symbol's code concatenated with its suffix character. + * + * Algorithm: use open addressing double hashing (no chaining) on the + * prefix code / suffix character combination. We do a variant of Knuth's + * algorithm D (vol. 3, sec. 6.4) along with G. Knott's relatively-prime + * secondary probe. + * + * The hash_value[] table is allocated from FAR heap space since it would + * use up rather a lot of the near data space in a PC. + */ + +typedef INT32 hash_entry; /* must hold (code_int<<8) | byte */ + +#define HASH_ENTRY(prefix, suffix) ((((hash_entry) (prefix)) << 8) | (suffix)) + + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + j_decompress_ptr cinfo; /* back link saves passing separate parm */ + + /* State for packing variable-width codes into a bitstream */ + int n_bits; /* current number of bits/code */ + code_int maxcode; /* maximum code, given n_bits */ + int init_bits; /* initial n_bits ... restored after clear */ + INT32 cur_accum; /* holds bits not yet output */ + int cur_bits; /* # of bits in cur_accum */ + + /* LZW string construction */ + code_int waiting_code; /* symbol not yet output; may be extendable */ + boolean first_byte; /* if TRUE, waiting_code is not valid */ + + /* State for GIF code assignment */ + code_int ClearCode; /* clear code (doesn't change) */ + code_int EOFCode; /* EOF code (ditto) */ + code_int free_code; /* LZW: first not-yet-used symbol code */ + code_int code_counter; /* not LZW: counts output symbols */ + + /* LZW hash table */ + code_int *hash_code; /* => hash table of symbol codes */ + hash_entry FAR *hash_value; /* => hash table of symbol values */ + + /* GIF data packet construction buffer */ + int bytesinpkt; /* # of bytes in current packet */ + char packetbuf[256]; /* workspace for accumulating packet */ + +} gif_dest_struct; + +typedef gif_dest_struct * gif_dest_ptr; + + +/* + * Routines to package finished data bytes into GIF data blocks. + * A data block consists of a count byte (1..255) and that many data bytes. + */ + +LOCAL(void) +flush_packet (gif_dest_ptr dinfo) +/* flush any accumulated data */ +{ + if (dinfo->bytesinpkt > 0) { /* never write zero-length packet */ + dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++; + if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt) + != (size_t) dinfo->bytesinpkt) + ERREXIT(dinfo->cinfo, JERR_FILE_WRITE); + dinfo->bytesinpkt = 0; + } +} + + +/* Add a character to current packet; flush to disk if necessary */ +#define CHAR_OUT(dinfo, c) \ + { (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c); \ + if ((dinfo)->bytesinpkt >= 255) \ + flush_packet(dinfo); \ + } + + +/* Routine to convert variable-width codes into a byte stream */ + +LOCAL(void) +output (gif_dest_ptr dinfo, code_int code) +/* Emit a code of n_bits bits */ +/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */ +{ + dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits; + dinfo->cur_bits += dinfo->n_bits; + + while (dinfo->cur_bits >= 8) { + CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); + dinfo->cur_accum >>= 8; + dinfo->cur_bits -= 8; + } + + /* + * If the next entry is going to be too big for the code size, + * then increase it, if possible. We do this here to ensure + * that it's done in sync with the decoder's codesize increases. + */ + if (dinfo->free_code > dinfo->maxcode) { + dinfo->n_bits++; + if (dinfo->n_bits == MAX_LZW_BITS) + dinfo->maxcode = LZW_TABLE_SIZE; /* free_code will never exceed this */ + else + dinfo->maxcode = MAXCODE(dinfo->n_bits); + } +} + + +/* Compression initialization & termination */ + + +LOCAL(void) +clear_hash (gif_dest_ptr dinfo) +/* Fill the hash table with empty entries */ +{ + /* It's sufficient to zero hash_code[] */ + MEMZERO(dinfo->hash_code, HSIZE * SIZEOF(code_int)); +} + + +LOCAL(void) +clear_block (gif_dest_ptr dinfo) +/* Reset compressor and issue a Clear code */ +{ + clear_hash(dinfo); /* delete all the symbols */ + dinfo->free_code = dinfo->ClearCode + 2; + output(dinfo, dinfo->ClearCode); /* inform decoder */ + dinfo->n_bits = dinfo->init_bits; /* reset code size */ + dinfo->maxcode = MAXCODE(dinfo->n_bits); +} + + +LOCAL(void) +compress_init (gif_dest_ptr dinfo, int i_bits) +/* Initialize compressor */ +{ + /* init all the state variables */ + dinfo->n_bits = dinfo->init_bits = i_bits; + dinfo->maxcode = MAXCODE(dinfo->n_bits); + dinfo->ClearCode = ((code_int) 1 << (i_bits - 1)); + dinfo->EOFCode = dinfo->ClearCode + 1; + dinfo->code_counter = dinfo->free_code = dinfo->ClearCode + 2; + dinfo->first_byte = TRUE; /* no waiting symbol yet */ + /* init output buffering vars */ + dinfo->bytesinpkt = 0; + dinfo->cur_accum = 0; + dinfo->cur_bits = 0; + /* clear hash table */ + if (dinfo->hash_code != NULL) + clear_hash(dinfo); + /* GIF specifies an initial Clear code */ + output(dinfo, dinfo->ClearCode); +} + + +LOCAL(void) +compress_term (gif_dest_ptr dinfo) +/* Clean up at end */ +{ + /* Flush out the buffered LZW code */ + if (! dinfo->first_byte) + output(dinfo, dinfo->waiting_code); + /* Send an EOF code */ + output(dinfo, dinfo->EOFCode); + /* Flush the bit-packing buffer */ + if (dinfo->cur_bits > 0) { + CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); + } + /* Flush the packet buffer */ + flush_packet(dinfo); +} + + +/* GIF header construction */ + + +LOCAL(void) +put_word (gif_dest_ptr dinfo, unsigned int w) +/* Emit a 16-bit word, LSB first */ +{ + putc(w & 0xFF, dinfo->pub.output_file); + putc((w >> 8) & 0xFF, dinfo->pub.output_file); +} + + +LOCAL(void) +put_3bytes (gif_dest_ptr dinfo, int val) +/* Emit 3 copies of same byte value --- handy subr for colormap construction */ +{ + putc(val, dinfo->pub.output_file); + putc(val, dinfo->pub.output_file); + putc(val, dinfo->pub.output_file); +} + + +LOCAL(void) +emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap) +/* Output the GIF file header, including color map */ +/* If colormap == NULL, synthesize a grayscale colormap */ +{ + int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte; + int cshift = dinfo->cinfo->data_precision - 8; + int i; + + if (num_colors > 256) + ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors); + /* Compute bits/pixel and related values */ + BitsPerPixel = 1; + while (num_colors > (1 << BitsPerPixel)) + BitsPerPixel++; + ColorMapSize = 1 << BitsPerPixel; + if (BitsPerPixel <= 1) + InitCodeSize = 2; + else + InitCodeSize = BitsPerPixel; + /* + * Write the GIF header. + * Note that we generate a plain GIF87 header for maximum compatibility. + */ + putc('G', dinfo->pub.output_file); + putc('I', dinfo->pub.output_file); + putc('F', dinfo->pub.output_file); + putc('8', dinfo->pub.output_file); + putc('7', dinfo->pub.output_file); + putc('a', dinfo->pub.output_file); + /* Write the Logical Screen Descriptor */ + put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); + put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); + FlagByte = 0x80; /* Yes, there is a global color table */ + FlagByte |= (BitsPerPixel - 1) << 4; /* color resolution */ + FlagByte |= (BitsPerPixel - 1); /* size of global color table */ + putc(FlagByte, dinfo->pub.output_file); + putc(0, dinfo->pub.output_file); /* Background color index */ + putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */ + /* Write the Global Color Map */ + /* If the color map is more than 8 bits precision, */ + /* we reduce it to 8 bits by shifting */ + for (i = 0; i < ColorMapSize; i++) { + if (i < num_colors) { + if (colormap != NULL) { + if (dinfo->cinfo->out_color_space == JCS_RGB) { + /* Normal case: RGB color map */ + putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file); + putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file); + putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file); + } else { + /* Grayscale "color map": possible if quantizing grayscale image */ + put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift); + } + } else { + /* Create a grayscale map of num_colors values, range 0..255 */ + put_3bytes(dinfo, (i * 255 + (num_colors - 1) / 2) / (num_colors - 1)); + } + } else { + /* fill out the map to a power of 2 */ + put_3bytes(dinfo, CENTERJSAMPLE >> cshift); + } + } + /* Write image separator and Image Descriptor */ + putc(',', dinfo->pub.output_file); /* separator */ + put_word(dinfo, 0); /* left/top offset */ + put_word(dinfo, 0); + put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */ + put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); + /* flag byte: not interlaced, no local color map */ + putc(0x00, dinfo->pub.output_file); + /* Write Initial Code Size byte */ + putc(InitCodeSize, dinfo->pub.output_file); + + /* Initialize for compression of image data */ + compress_init(dinfo, InitCodeSize + 1); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + + if (cinfo->quantize_colors) + emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap); + else + emit_header(dest, 256, (JSAMPARRAY) NULL); +} + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + + +/* + * The LZW algorithm proper + */ + +METHODDEF(void) +put_LZW_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + register JSAMPROW ptr; + register JDIMENSION col; + code_int c; + register hash_int i; + register hash_int disp; + register hash_entry probe_value; + + ptr = dest->pub.buffer[0]; + for (col = cinfo->output_width; col > 0; col--) { + /* Accept and compress one 8-bit byte */ + c = (code_int) GETJSAMPLE(*ptr++); + + if (dest->first_byte) { /* need to initialize waiting_code */ + dest->waiting_code = c; + dest->first_byte = FALSE; + continue; + } + + /* Probe hash table to see if a symbol exists for + * waiting_code followed by c. + * If so, replace waiting_code by that symbol and continue. + */ + i = ((hash_int) c << (MAX_LZW_BITS-8)) + dest->waiting_code; + /* i is less than twice 2**MAX_LZW_BITS, therefore less than twice HSIZE */ + if (i >= HSIZE) + i -= HSIZE; + + probe_value = HASH_ENTRY(dest->waiting_code, c); + + if (dest->hash_code[i] == 0) { + /* hit empty slot; desired symbol not in table */ + output(dest, dest->waiting_code); + if (dest->free_code < LZW_TABLE_SIZE) { + dest->hash_code[i] = dest->free_code++; /* add symbol to hashtable */ + dest->hash_value[i] = probe_value; + } else + clear_block(dest); + dest->waiting_code = c; + continue; + } + if (dest->hash_value[i] == probe_value) { + dest->waiting_code = dest->hash_code[i]; + continue; + } + + if (i == 0) /* secondary hash (after G. Knott) */ + disp = 1; + else + disp = HSIZE - i; + for (;;) { + i -= disp; + if (i < 0) + i += HSIZE; + if (dest->hash_code[i] == 0) { + /* hit empty slot; desired symbol not in table */ + output(dest, dest->waiting_code); + if (dest->free_code < LZW_TABLE_SIZE) { + dest->hash_code[i] = dest->free_code++; /* add symbol to hashtable */ + dest->hash_value[i] = probe_value; + } else + clear_block(dest); + dest->waiting_code = c; + break; + } + if (dest->hash_value[i] == probe_value) { + dest->waiting_code = dest->hash_code[i]; + break; + } + } + } +} + + +/* + * The pseudo-compression algorithm. + * + * In this version we simply output each pixel value as a separate symbol; + * thus, no compression occurs. In fact, there is expansion of one bit per + * pixel, because we use a symbol width one bit wider than the pixel width. + * + * GIF ordinarily uses variable-width symbols, and the decoder will expect + * to ratchet up the symbol width after a fixed number of symbols. + * To simplify the logic and keep the expansion penalty down, we emit a + * GIF Clear code to reset the decoder just before the width would ratchet up. + * Thus, all the symbols in the output file will have the same bit width. + * Note that emitting the Clear codes at the right times is a mere matter of + * counting output symbols and is in no way dependent on the LZW algorithm. + * + * With a small basic pixel width (low color count), Clear codes will be + * needed very frequently, causing the file to expand even more. So this + * simplistic approach wouldn't work too well on bilevel images, for example. + * But for output of JPEG conversions the pixel width will usually be 8 bits + * (129 to 256 colors), so the overhead added by Clear symbols is only about + * one symbol in every 256. + */ + +METHODDEF(void) +put_raw_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + register JSAMPROW ptr; + register JDIMENSION col; + code_int c; + + ptr = dest->pub.buffer[0]; + for (col = cinfo->output_width; col > 0; col--) { + c = (code_int) GETJSAMPLE(*ptr++); + /* Accept and output one pixel value. + * The given value must be less than n_bits wide. + */ + + /* Output the given pixel value as a symbol. */ + output(dest, c); + /* Issue Clear codes often enough to keep the reader from ratcheting up + * its symbol size. + */ + if (dest->code_counter < dest->maxcode) { + dest->code_counter++; + } else { + output(dest, dest->ClearCode); + dest->code_counter = dest->ClearCode + 2; /* reset the counter */ + } + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + + /* Flush compression mechanism */ + compress_term(dest); + /* Write a zero-length data block to end the series */ + putc(0, dest->pub.output_file); + /* Write the GIF terminator mark */ + putc(';', dest->pub.output_file); + /* Make sure we wrote the output file OK */ + JFFLUSH(dest->pub.output_file); + if (JFERROR(dest->pub.output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for GIF format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_gif (j_decompress_ptr cinfo, boolean is_lzw) +{ + gif_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (gif_dest_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(gif_dest_struct)); + dest->cinfo = cinfo; /* make back link for subroutines */ + dest->pub.start_output = start_output_gif; + dest->pub.finish_output = finish_output_gif; + + if (cinfo->out_color_space != JCS_GRAYSCALE && + cinfo->out_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_GIF_COLORSPACE); + + /* Force quantization if color or if > 8 bits input */ + if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) { + /* Force quantization to at most 256 colors */ + cinfo->quantize_colors = TRUE; + if (cinfo->desired_number_of_colors > 256) + cinfo->desired_number_of_colors = 256; + } + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + if (cinfo->output_components != 1) /* safety check: just one component? */ + ERREXIT(cinfo, JERR_GIF_BUG); + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + if (is_lzw) { + dest->pub.put_pixel_rows = put_LZW_pixel_rows; + /* Allocate space for hash table */ + dest->hash_code = (code_int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, HSIZE * SIZEOF(code_int)); + dest->hash_value = (hash_entry FAR *) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, HSIZE * SIZEOF(hash_entry)); + } else { + dest->pub.put_pixel_rows = put_raw_pixel_rows; + /* Mark tables unused */ + dest->hash_code = NULL; + dest->hash_value = NULL; + } + + return &dest->pub; +} + +#endif /* GIF_SUPPORTED */ diff --git a/jpeg-9d/wrjpgcom.1 b/jpeg-9d/wrjpgcom.1 new file mode 100644 index 0000000..d419a99 --- /dev/null +++ b/jpeg-9d/wrjpgcom.1 @@ -0,0 +1,103 @@ +.TH WRJPGCOM 1 "15 June 1995" +.SH NAME +wrjpgcom \- insert text comments into a JPEG file +.SH SYNOPSIS +.B wrjpgcom +[ +.B \-replace +] +[ +.BI \-comment " text" +] +[ +.BI \-cfile " name" +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B wrjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and generates a new JPEG/JFIF file on standard output. A comment block is +added to the file. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.PP +.B wrjpgcom +adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks; but you +can delete the old COM blocks if you wish. +.SH OPTIONS +Switch names may be abbreviated, and are not case sensitive. +.TP +.B \-replace +Delete any existing COM blocks from the file. +.TP +.BI \-comment " text" +Supply text for new COM block on command line. +.TP +.BI \-cfile " name" +Read text for new COM block from named file. +.PP +If you have only one line of comment text to add, you can provide it on the +command line with +.BR \-comment . +The comment text must be surrounded with quotes so that it is treated as a +single argument. Longer comments can be read from a text file. +.PP +If you give neither +.B \-comment +nor +.BR \-cfile , +then +.B wrjpgcom +will read the comment text from standard input. (In this case an input image +file name MUST be supplied, so that the source JPEG file comes from somewhere +else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file +indicator (usually control-D) to terminate the comment text entry. +.PP +.B wrjpgcom +will not add a COM block if the provided comment string is empty. Therefore +\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file. +.SH EXAMPLES +.LP +Add a short comment to in.jpg, producing out.jpg: +.IP +.B wrjpgcom \-c +\fI"View of my back yard" in.jpg +.B > +.I out.jpg +.PP +Attach a long comment previously stored in comment.txt: +.IP +.B wrjpgcom +.I in.jpg +.B < +.I comment.txt +.B > +.I out.jpg +.PP +or equivalently +.IP +.B wrjpgcom +.B -cfile +.I comment.txt +.B < +.I in.jpg +.B > +.I out.jpg +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/jpeg-9d/wrjpgcom.c b/jpeg-9d/wrjpgcom.c new file mode 100644 index 0000000..571e9d0 --- /dev/null +++ b/jpeg-9d/wrjpgcom.c @@ -0,0 +1,599 @@ +/* + * wrjpgcom.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2015-2017 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a very simple stand-alone application that inserts + * user-supplied text as a COM (comment) marker in a JFIF file. + * This may be useful as an example of the minimum logic needed to parse + * JPEG markers. + */ + +#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ +#include "jinclude.h" /* get auto-config symbols, */ + +#ifndef HAVE_STDLIB_H /* should declare malloc() */ +extern void * malloc (); +#endif +#include /* to declare isupper(), tolower() */ +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif + +/* Reduce this value if your malloc() can't allocate blocks up to 64K. + * On DOS, compiling in large model is usually a better solution. + */ + +#ifndef MAX_COM_LENGTH +#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */ +#endif + + +/* + * These macros are used to read the input file and write the output file. + * To reuse this code in another application, you might need to change these. + */ + +static FILE * infile; /* input JPEG file */ + +/* Return next input byte, or EOF if no more */ +#define NEXTBYTE() getc(infile) + +static FILE * outfile; /* output JPEG file */ + +/* Emit an output byte */ +#define PUTBYTE(x) putc((x), outfile) + + +/* Error exit handler */ +#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) + + +/* Read one byte, testing for EOF */ +static int +read_1_byte (void) +{ + int c; + + c = NEXTBYTE(); + if (c == EOF) + ERREXIT("Premature EOF in JPEG file"); + return c; +} + +/* Read 2 bytes, convert to unsigned int */ +/* All 2-byte quantities in JPEG markers are MSB first */ +static unsigned int +read_2_bytes (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + if (c1 == EOF) + ERREXIT("Premature EOF in JPEG file"); + c2 = NEXTBYTE(); + if (c2 == EOF) + ERREXIT("Premature EOF in JPEG file"); + return (((unsigned int) c1) << 8) + ((unsigned int) c2); +} + + +/* Routines to write data to output file */ + +static void +write_1_byte (int c) +{ + PUTBYTE(c); +} + +static void +write_2_bytes (unsigned int val) +{ + PUTBYTE((val >> 8) & 0xFF); + PUTBYTE(val & 0xFF); +} + +static void +write_marker (int marker) +{ + PUTBYTE(0xFF); + PUTBYTE(marker); +} + +static void +copy_rest_of_file (void) +{ + int c; + + while ((c = NEXTBYTE()) != EOF) + PUTBYTE(c); +} + + +/* + * JPEG markers consist of one or more 0xFF bytes, followed by a marker + * code byte (which is not an FF). Here are the marker codes of interest + * in this program. (See jdmarker.c for a more complete list.) + */ + +#define M_SOF0 0xC0 /* Start Of Frame N */ +#define M_SOF1 0xC1 /* N indicates which compression process */ +#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ +#define M_SOF3 0xC3 +#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ +#define M_SOF6 0xC6 +#define M_SOF7 0xC7 +#define M_SOF9 0xC9 +#define M_SOF10 0xCA +#define M_SOF11 0xCB +#define M_SOF13 0xCD +#define M_SOF14 0xCE +#define M_SOF15 0xCF +#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ +#define M_EOI 0xD9 /* End Of Image (end of datastream) */ +#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ +#define M_COM 0xFE /* COMment */ + + +/* + * Find the next JPEG marker and return its marker code. + * We expect at least one FF byte, possibly more if the compressor used FFs + * to pad the file. (Padding FFs will NOT be replicated in the output file.) + * There could also be non-FF garbage between markers. The treatment of such + * garbage is unspecified; we choose to skip over it but emit a warning msg. + * NB: this routine must not be used after seeing SOS marker, since it will + * not deal correctly with FF/00 sequences in the compressed image data... + */ + +static int +next_marker (void) +{ + int c; + int discarded_bytes = 0; + + /* Find 0xFF byte; count and skip any non-FFs. */ + c = read_1_byte(); + while (c != 0xFF) { + discarded_bytes++; + c = read_1_byte(); + } + /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs + * are legal as pad bytes, so don't count them in discarded_bytes. + */ + do { + c = read_1_byte(); + } while (c == 0xFF); + + if (discarded_bytes != 0) { + fprintf(stderr, "Warning: garbage data found in JPEG file\n"); + } + + return c; +} + + +/* + * Read the initial marker, which should be SOI. + * For a JFIF file, the first two bytes of the file should be literally + * 0xFF M_SOI. To be more general, we could use next_marker, but if the + * input file weren't actually JPEG at all, next_marker might read the whole + * file and then return a misleading error message... + */ + +static int +first_marker (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + c2 = NEXTBYTE(); + if (c1 != 0xFF || c2 != M_SOI) + ERREXIT("Not a JPEG file"); + return c2; +} + + +/* + * Most types of marker are followed by a variable-length parameter segment. + * This routine skips over the parameters for any marker we don't otherwise + * want to process. + * Note that we MUST skip the parameter segment explicitly in order not to + * be fooled by 0xFF bytes that might appear within the parameter segment; + * such bytes do NOT introduce new markers. + */ + +static void +copy_variable (void) +/* Copy an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + write_2_bytes(length); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Copy the remaining bytes */ + while (length > 0) { + write_1_byte(read_1_byte()); + length--; + } +} + +static void +skip_variable (void) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + (void) read_1_byte(); + length--; + } +} + + +/* + * Parse the marker stream until SOFn or EOI is seen; + * copy data to output, but discard COM markers unless keep_COM is true. + */ + +static int +scan_JPEG_header (int keep_COM) +{ + int marker; + + /* Expect SOI at start of file */ + if (first_marker() != M_SOI) + ERREXIT("Expected SOI marker first"); + write_marker(M_SOI); + + /* Scan miscellaneous markers until we reach SOFn. */ + for (;;) { + marker = next_marker(); + switch (marker) { + /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, + * treated as SOFn. C4 in particular is actually DHT. + */ + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + case M_SOF2: /* Progressive, Huffman */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_SOF9: /* Extended sequential, arithmetic */ + case M_SOF10: /* Progressive, arithmetic */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + return marker; + + case M_SOS: /* should not see compressed data before SOF */ + ERREXIT("SOS without prior SOFn"); + break; + + case M_EOI: /* in case it's a tables-only JPEG stream */ + return marker; + + case M_COM: /* Existing COM: conditionally discard */ + if (keep_COM) { + write_marker(marker); + copy_variable(); + } else { + skip_variable(); + } + break; + + default: /* Anything else just gets copied */ + write_marker(marker); + copy_variable(); /* we assume it has a parameter count... */ + break; + } + } /* end loop */ +} + + +/* Command line parsing code */ + +static const char * progname; /* program name for error messages */ + + +static void +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n"); + fprintf(stderr, "You can add to or replace any existing comment(s).\n"); + + fprintf(stderr, "Usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -replace Delete any existing comments\n"); + fprintf(stderr, " -comment \"text\" Insert comment with given text\n"); + fprintf(stderr, " -cfile name Read comment from named file\n"); + fprintf(stderr, "Notice that you must put quotes around the comment text\n"); + fprintf(stderr, "when you use -comment.\n"); + fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n"); + fprintf(stderr, "then the comment text is read from standard input.\n"); + fprintf(stderr, "It can be multiple lines, up to %u characters total.\n", + (unsigned int) MAX_COM_LENGTH); +#ifndef TWO_FILE_COMMANDLINE + fprintf(stderr, "You must specify an input JPEG file name when supplying\n"); + fprintf(stderr, "comment text from standard input.\n"); +#endif + + exit(EXIT_FAILURE); +} + + +static int +keymatch (char * arg, const char * keyword, int minchars) +/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ +/* keyword is the constant keyword (must be lower case already), */ +/* minchars is length of minimum legal abbreviation. */ +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return 0; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return 0; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return 0; + return 1; /* A-OK */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + int argn; + char * arg; + int keep_COM = 1; + char * comment_arg = NULL; + FILE * comment_file = NULL; + unsigned int comment_length = 0; + int marker; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "wrjpgcom"; /* in case C library doesn't provide it */ + + /* Parse switches, if any */ + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (arg[0] != '-') + break; /* not switch, must be file name */ + arg++; /* advance over '-' */ + if (keymatch(arg, "replace", 1)) { + keep_COM = 0; + } else if (keymatch(arg, "cfile", 2)) { + if (++argn >= argc) usage(); + if ((comment_file = fopen(argv[argn], "r")) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else if (keymatch(arg, "comment", 1)) { + if (++argn >= argc) usage(); + comment_arg = argv[argn]; + /* If the comment text starts with '"', then we are probably running + * under MS-DOG and must parse out the quoted string ourselves. Sigh. + */ + if (comment_arg[0] == '"') { + comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); + if (comment_arg == NULL) + ERREXIT("Insufficient memory"); + if (strlen(argv[argn]+1) >= (size_t) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + strcpy(comment_arg, argv[argn]+1); + for (;;) { + comment_length = (unsigned int) strlen(comment_arg); + if (comment_length > 0 && comment_arg[comment_length-1] == '"') { + comment_arg[comment_length-1] = '\0'; /* zap terminating quote */ + break; + } + if (++argn >= argc) + ERREXIT("Missing ending quote mark"); + if (strlen(comment_arg) + 1 + strlen(argv[argn]) >= + (size_t) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + strcat(comment_arg, " "); + strcat(comment_arg, argv[argn]); + } + } else if (strlen(comment_arg) >= (size_t) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + comment_length = (unsigned int) strlen(comment_arg); + } else + usage(); + } + + /* Cannot use both -comment and -cfile. */ + if (comment_arg != NULL && comment_file != NULL) + usage(); + /* If there is neither -comment nor -cfile, we will read the comment text + * from stdin; in this case there MUST be an input JPEG file name. + */ + if (comment_arg == NULL && comment_file == NULL && argn >= argc) + usage(); + + /* Open the input file. */ + if (argn < argc) { + if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdin\n", progname); + exit(EXIT_FAILURE); + } +#else + infile = stdin; +#endif + } + + /* Open the output file. */ +#ifdef TWO_FILE_COMMANDLINE + /* Must have explicit output file name */ + if (argn != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]); + exit(EXIT_FAILURE); + } +#else + /* Unix style: expect zero or one file name */ + if (argn < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } + /* default output file is stdout */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdout\n", progname); + exit(EXIT_FAILURE); + } +#else + outfile = stdout; +#endif +#endif /* TWO_FILE_COMMANDLINE */ + + /* Collect comment text from comment_file or stdin, if necessary */ + if (comment_arg == NULL) { + FILE * src_file; + int c; + + comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); + if (comment_arg == NULL) + ERREXIT("Insufficient memory"); + comment_length = 0; + src_file = (comment_file != NULL ? comment_file : stdin); + while ((c = getc(src_file)) != EOF) { + if (comment_length >= (unsigned int) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + comment_arg[comment_length++] = (char) c; + } + if (comment_file != NULL) + fclose(comment_file); + } + + /* Copy JPEG headers until SOFn marker; + * we will insert the new comment marker just before SOFn. + * This (a) causes the new comment to appear after, rather than before, + * existing comments; and (b) ensures that comments come after any JFIF + * or JFXX markers, as required by the JFIF specification. + */ + marker = scan_JPEG_header(keep_COM); + /* Insert the new COM marker, but only if nonempty text has been supplied */ + if (comment_length > 0) { + write_marker(M_COM); + write_2_bytes(comment_length + 2); + while (comment_length > 0) { + write_1_byte(*comment_arg++); + comment_length--; + } + } + /* Duplicate the remainder of the source file. + * Note that any COM markers occuring after SOF will not be touched. + */ + write_marker(marker); + copy_rest_of_file(); + + /* All done. */ + exit(EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/jpeg-9d/wrjpgcom.vcxproj b/jpeg-9d/wrjpgcom.vcxproj new file mode 100644 index 0000000..182d16b --- /dev/null +++ b/jpeg-9d/wrjpgcom.vcxproj @@ -0,0 +1,102 @@ + + + + + Release + Win32 + + + Release + x64 + + + + {B57065D4-DDDA-4668-BAF5-2D49270C973C} + Win32Proj + wrjpgcom + 10.0 + + + + Application + false + true + Unicode + v142 + + + Application + false + true + Unicode + v142 + + + + + + + + + + + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + false + $(Configuration)\$(Platform)\ + $(Configuration)\$(Platform)\$(ProjectName)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/jpeg-9d/wrjpgcom.vcxproj.filters b/jpeg-9d/wrjpgcom.vcxproj.filters new file mode 100644 index 0000000..370fa14 --- /dev/null +++ b/jpeg-9d/wrjpgcom.vcxproj.filters @@ -0,0 +1,30 @@ + + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + + + Source Files + + + \ No newline at end of file diff --git a/jpeg-9d/wrppm.c b/jpeg-9d/wrppm.c new file mode 100644 index 0000000..eb8bdf4 --- /dev/null +++ b/jpeg-9d/wrppm.c @@ -0,0 +1,265 @@ +/* + * wrppm.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in PPM/PGM format. + * The extended 2-byte-per-sample raw PPM/PGM formats are supported. + * The PBMPLUS library is NOT required to compile this software + * (but it is highly useful as a set of PPM image manipulation programs). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef PPM_SUPPORTED + + +/* + * For 12-bit JPEG data, we either downscale the values to 8 bits + * (to write standard byte-per-sample PPM/PGM files), or output + * nonstandard word-per-sample PPM/PGM files. Downscaling is done + * if PPM_NORAWWORD is defined (this can be done in the Makefile + * or in jconfig.h). + * (When the core library supports data precision reduction, a cleaner + * implementation will be to ask for that instead.) + */ + +#if BITS_IN_JSAMPLE == 8 +#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) (v) +#define BYTESPERSAMPLE 1 +#define PPM_MAXVAL 255 +#else +#ifdef PPM_NORAWWORD +#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8)) +#define BYTESPERSAMPLE 1 +#define PPM_MAXVAL 255 +#else +/* The word-per-sample format always puts the MSB first. */ +#define PUTPPMSAMPLE(ptr,v) \ + { register int val_ = v; \ + *ptr++ = (char) ((val_ >> 8) & 0xFF); \ + *ptr++ = (char) (val_ & 0xFF); \ + } +#define BYTESPERSAMPLE 2 +#define PPM_MAXVAL ((1<pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * This code is used when we have to copy the data and apply a pixel + * format translation. Typically this only happens in 12-bit mode. + */ + +METHODDEF(void) +copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = dest->samples_per_row; col > 0; col--) { + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++)); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Write some pixel data when color quantization is in effect. + * We have to demap the color index values to straight data. + */ + +METHODDEF(void) +put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register int pixval; + register JSAMPROW ptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JSAMPROW color_map1 = cinfo->colormap[1]; + register JSAMPROW color_map2 = cinfo->colormap[2]; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + pixval = GETJSAMPLE(*ptr++); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval])); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval])); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval])); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + +METHODDEF(void) +put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register JSAMPROW ptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[GETJSAMPLE(*ptr++)])); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Emit file header */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + /* emit header for raw PGM format */ + fprintf(dinfo->output_file, "P5\n%ld %ld\n%d\n", + (long) cinfo->output_width, (long) cinfo->output_height, + PPM_MAXVAL); + break; + case JCS_RGB: + /* emit header for raw PPM format */ + fprintf(dinfo->output_file, "P6\n%ld %ld\n%d\n", + (long) cinfo->output_width, (long) cinfo->output_height, + PPM_MAXVAL); + break; + default: + ERREXIT(cinfo, JERR_PPM_COLORSPACE); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Make sure we wrote the output file OK */ + JFFLUSH(dinfo->output_file); + if (JFERROR(dinfo->output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for PPM format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_ppm (j_decompress_ptr cinfo) +{ + ppm_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (ppm_dest_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(ppm_dest_struct)); + dest->pub.start_output = start_output_ppm; + dest->pub.finish_output = finish_output_ppm; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Create physical I/O buffer. Note we make this near on a PC. */ + dest->samples_per_row = cinfo->output_width * cinfo->out_color_components; + dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char)); + dest->iobuffer = (char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width); + + if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 || + SIZEOF(JSAMPLE) != SIZEOF(char)) { + /* When quantizing, we need an output buffer for colormap indexes + * that's separate from the physical I/O buffer. We also need a + * separate buffer if pixel format translation must take place. + */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->output_components, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + if (! cinfo->quantize_colors) + dest->pub.put_pixel_rows = copy_pixel_rows; + else if (cinfo->out_color_space == JCS_GRAYSCALE) + dest->pub.put_pixel_rows = put_demapped_gray; + else + dest->pub.put_pixel_rows = put_demapped_rgb; + } else { + /* We will fwrite() directly from decompressor output buffer. */ + /* Synthesize a JSAMPARRAY pointer structure */ + /* Cast here implies near->far pointer conversion on PCs */ + dest->pixrow = (JSAMPROW) dest->iobuffer; + dest->pub.buffer = & dest->pixrow; + dest->pub.buffer_height = 1; + dest->pub.put_pixel_rows = put_pixel_rows; + } + + return &dest->pub; +} + +#endif /* PPM_SUPPORTED */ diff --git a/jpeg-9d/wrrle.c b/jpeg-9d/wrrle.c new file mode 100644 index 0000000..dc2fadb --- /dev/null +++ b/jpeg-9d/wrrle.c @@ -0,0 +1,306 @@ +/* + * wrrle.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2017-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in RLE format. + * The Utah Raster Toolkit library is required (version 3.1 or later). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * Based on code contributed by Mike Lijewski, + * with updates from Robert Hutchinson. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef RLE_SUPPORTED + +/* rle.h is provided by the Utah Raster Toolkit. */ + +#include + +/* + * We assume that JSAMPLE has the same representation as rle_pixel, + * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + + +/* + * Since RLE stores scanlines bottom-to-top, we have to invert the image + * from JPEG's top-to-bottom order. To do this, we save the outgoing data + * in a virtual array during put_pixel_row calls, then actually emit the + * RLE file during finish_output. + */ + + +/* + * For now, if we emit an RLE color map then it is always 256 entries long, + * though not all of the entries need be used. + */ + +#define CMAPBITS 8 +#define CMAPLENGTH (1<<(CMAPBITS)) + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + jvirt_sarray_ptr image; /* virtual array to store the output image */ + rle_map *colormap; /* RLE-style color map, or NULL if none */ + rle_pixel **rle_row; /* To pass rows to rle_putrow() */ + +} rle_dest_struct; + +typedef rle_dest_struct * rle_dest_ptr; + + +/* Forward declarations */ +METHODDEF(void) rle_put_pixel_rows + JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + + +/* + * Write the file header. + * + * In this module it's easier to wait till finish_output to write anything. + */ + +METHODDEF(void) +start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + size_t cmapsize; + int ci, i; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* + * Make sure the image can be stored in RLE format. + * + * - RLE stores image dimensions as *signed* 16 bit integers. JPEG + * uses unsigned, so we have to check the width. + * + * - Colorspace is expected to be grayscale or RGB. + * + * - The number of channels (components) is expected to be 1 (grayscale/ + * pseudocolor) or 3 (truecolor/directcolor). + * (could be 2 or 4 if using an alpha channel, but we aren't) + */ + + if (cinfo->output_width > 32767 || cinfo->output_height > 32767) + ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, + cinfo->output_height); + + if (cinfo->out_color_space != JCS_GRAYSCALE && + cinfo->out_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_RLE_COLORSPACE); + + if (cinfo->output_components != 1 && cinfo->output_components != 3) + ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components); + + /* Convert colormap, if any, to RLE format. */ + + dest->colormap = NULL; + + if (cinfo->quantize_colors) { + /* Allocate storage for RLE-style cmap, zero any extra entries */ + cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map); + dest->colormap = (rle_map *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize); + MEMZERO(dest->colormap, cmapsize); + + /* Save away data in RLE format --- note 8-bit left shift! */ + /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */ + for (ci = 0; ci < cinfo->out_color_components; ci++) { + for (i = 0; i < cinfo->actual_number_of_colors; i++) { + dest->colormap[ci * CMAPLENGTH + i] = + GETJSAMPLE(cinfo->colormap[ci][i]) << 8; + } + } + } + + /* Set the output buffer to the first row */ + dest->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE); + dest->pub.buffer_height = 1; + + dest->pub.put_pixel_rows = rle_put_pixel_rows; + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->total_extra_passes++; /* count file writing as separate pass */ + } +#endif +} + + +/* + * Write some pixel data. + * + * This routine just saves the data away in a virtual array. + */ + +METHODDEF(void) +rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + + if (cinfo->output_scanline < cinfo->output_height) { + dest->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + cinfo->output_scanline, (JDIMENSION) 1, TRUE); + } +} + + +/* + * Finish up at the end of the file. + * + * Here is where we really output the RLE file. + */ + +METHODDEF(void) +finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + rle_hdr header; /* Output file information */ + rle_pixel **rle_row, *red_ptr, *green_ptr, *blue_ptr; + JSAMPROW output_row; + char cmapcomment[80]; + int row, col; + int ci; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Initialize the header info */ + header = *rle_hdr_init(NULL); + header.rle_file = dest->pub.output_file; + header.xmin = 0; + header.xmax = cinfo->output_width - 1; + header.ymin = 0; + header.ymax = cinfo->output_height - 1; + header.alpha = 0; + header.ncolors = cinfo->output_components; + for (ci = 0; ci < cinfo->output_components; ci++) { + RLE_SET_BIT(header, ci); + } + if (cinfo->quantize_colors) { + header.ncmap = cinfo->out_color_components; + header.cmaplen = CMAPBITS; + header.cmap = dest->colormap; + /* Add a comment to the output image with the true colormap length. */ + sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors); + rle_putcom(cmapcomment, &header); + } + + /* Emit the RLE header and color map (if any) */ + rle_put_setup(&header); + + /* Now output the RLE data from our virtual array. + * We assume here that (a) rle_pixel is represented the same as JSAMPLE, + * and (b) we are not on a machine where FAR pointers differ from regular. + */ + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_limit = cinfo->output_height; + progress->pub.pass_counter = 0; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + + if (cinfo->output_components == 1) { + for (row = cinfo->output_height - 1; row >= 0; row--) { + rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + (JDIMENSION) row, (JDIMENSION) 1, FALSE); + rle_putrow(rle_row, (int) cinfo->output_width, &header); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } else { + for (row = cinfo->output_height - 1; row >= 0; row--) { + output_row = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + (JDIMENSION) row, (JDIMENSION) 1, FALSE); + rle_row = dest->rle_row; + red_ptr = rle_row[0]; + green_ptr = rle_row[1]; + blue_ptr = rle_row[2]; + for (col = cinfo->output_width; col > 0; col--) { + *red_ptr++ = GETJSAMPLE(*output_row++); + *green_ptr++ = GETJSAMPLE(*output_row++); + *blue_ptr++ = GETJSAMPLE(*output_row++); + } + rle_putrow(rle_row, (int) cinfo->output_width, &header); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) + progress->completed_extra_passes++; +#endif + + /* Emit file trailer */ + rle_puteof(&header); + JFFLUSH(dest->pub.output_file); + if (JFERROR(dest->pub.output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for RLE format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_rle (j_decompress_ptr cinfo) +{ + rle_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (rle_dest_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(rle_dest_struct)); + dest->pub.start_output = start_output_rle; + dest->pub.finish_output = finish_output_rle; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Allocate a work array for output to the RLE library. */ + dest->rle_row = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) cinfo->output_components); + + /* Allocate a virtual array to hold the image. */ + dest->image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + cinfo->output_width * (JDIMENSION) cinfo->output_components, + cinfo->output_height, (JDIMENSION) 1); + + return &dest->pub; +} + +#endif /* RLE_SUPPORTED */ diff --git a/jpeg-9d/wrtarga.c b/jpeg-9d/wrtarga.c new file mode 100644 index 0000000..8ded518 --- /dev/null +++ b/jpeg-9d/wrtarga.c @@ -0,0 +1,254 @@ +/* + * wrtarga.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2015-2019 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in Targa format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * Based on code contributed by Lee Daniel Crocker. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef TARGA_SUPPORTED + + +/* + * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. + * This is not yet implemented. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * The output buffer needs to be writable by fwrite(). On PCs, we must + * allocate the buffer in near data space, because we are assuming small-data + * memory model, wherein fwrite() can't reach far memory. If you need to + * process very wide images on a PC, you might have to compile in large-memory + * model, or else replace fwrite() with a putc() loop --- which will be much + * slower. + */ + + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + char *iobuffer; /* physical I/O buffer */ + JDIMENSION buffer_width; /* width of one row */ +} tga_dest_struct; + +typedef tga_dest_struct * tga_dest_ptr; + + +LOCAL(void) +write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors) +/* Create and write a Targa header */ +{ + char targaheader[18]; + + /* Set unused fields of header to 0 */ + MEMZERO(targaheader, SIZEOF(targaheader)); + + if (num_colors > 0) { + targaheader[1] = 1; /* color map type 1 */ + targaheader[5] = (char) (num_colors & 0xFF); + targaheader[6] = (char) (num_colors >> 8); + targaheader[7] = 24; /* 24 bits per cmap entry */ + } + + targaheader[12] = (char) (cinfo->output_width & 0xFF); + targaheader[13] = (char) (cinfo->output_width >> 8); + targaheader[14] = (char) (cinfo->output_height & 0xFF); + targaheader[15] = (char) (cinfo->output_height >> 8); + targaheader[17] = 0x20; /* Top-down, non-interlaced */ + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + targaheader[2] = 3; /* image type = uncompressed grayscale */ + targaheader[16] = 8; /* bits per pixel */ + } else { /* must be RGB */ + if (num_colors > 0) { + targaheader[2] = 1; /* image type = colormapped RGB */ + targaheader[16] = 8; + } else { + targaheader[2] = 2; /* image type = uncompressed RGB */ + targaheader[16] = 24; + } + } + + if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* used for unquantized full-color output */ +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */ + outptr[1] = (char) GETJSAMPLE(inptr[1]); + outptr[2] = (char) GETJSAMPLE(inptr[0]); + inptr += 3, outptr += 3; + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + +METHODDEF(void) +put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* used for grayscale OR quantized color output */ +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = (char) GETJSAMPLE(*inptr++); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Write some demapped pixel data when color quantization is in effect. + * For Targa, this is only applied to grayscale data. + */ + +METHODDEF(void) +put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + int num_colors, i; + FILE *outfile; + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + /* Targa doesn't have a mapped grayscale format, so we will */ + /* demap quantized gray output. Never emit a colormap. */ + write_header(cinfo, dinfo, 0); + if (cinfo->quantize_colors) + dinfo->put_pixel_rows = put_demapped_gray; + else + dinfo->put_pixel_rows = put_gray_rows; + break; + case JCS_RGB: + if (cinfo->quantize_colors) { + /* We only support 8-bit colormap indexes, so only 256 colors */ + num_colors = cinfo->actual_number_of_colors; + if (num_colors > 256) + ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors); + write_header(cinfo, dinfo, num_colors); + /* Write the colormap. Note Targa uses BGR byte order */ + outfile = dinfo->output_file; + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile); + putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile); + putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile); + } + dinfo->put_pixel_rows = put_gray_rows; + } else { + write_header(cinfo, dinfo, 0); + dinfo->put_pixel_rows = put_pixel_rows; + } + break; + default: + ERREXIT(cinfo, JERR_TGA_COLORSPACE); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Make sure we wrote the output file OK */ + JFFLUSH(dinfo->output_file); + if (JFERROR(dinfo->output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for Targa format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_targa (j_decompress_ptr cinfo) +{ + tga_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (tga_dest_ptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, SIZEOF(tga_dest_struct)); + dest->pub.start_output = start_output_tga; + dest->pub.finish_output = finish_output_tga; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Create I/O buffer. Note we make this near on a PC. */ + dest->buffer_width = cinfo->output_width * cinfo->output_components; + dest->iobuffer = (char *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, + JPOOL_IMAGE, (size_t) dest->buffer_width * SIZEOF(char)); + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) ((j_common_ptr) cinfo, + JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return &dest->pub; +} + +#endif /* TARGA_SUPPORTED */