A makeshift wall-based toiletry holder. Fully parametric.
This should only be printed in PETG or in a different hydrophobic material. Unlike some of my other designs, this one might need to be replaced every 2-3 years (depending on how good you are at rinsing your toothbrush).
Depending on your slicer, inset text can be added to the front of the model (as I have done many times)
The default sizing can be modified to fit several use cases (including non bathroom ones). Some of the more notable ones are included below:
width- The external width of the holder (mm)depth- The external depth of the holder (mm)height- The external height of the holder (mm)drain_width- The width of each drain (mm)drain_count- The number of drains spanning the entire width (count)nail_head_diam- The diameters of the nail inset (mm)nail_diam- The clearance diameter of the nail hole (mm)nail_count- The total number of nails spanning the entire width (count)
I wanted to make tooth-brushing more personable for my little ones. Having a dedicated place for them to stow their toilitries in our very small bathroom was very helpful!
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
