Auto lädt, trotz evcc off

[MehrCurry]

Guten Morgen,

ich test gerade zum erstem Mal meine Konfiguration. Raspi an Wallbe, Auto an Wallbe.

Das Auto fängt sofort an zu laden, unabhängig von der Einstellung des Modus (Off, Sofort, Min+PV, PV) im evcc.

evcc    | [site  ] DEBUG 2021/05/09 06:51:06 pv power: 323W
evcc    | [site  ] DEBUG 2021/05/09 06:51:06 grid power: 6261W
evcc    | [site  ] DEBUG 2021/05/09 06:51:06 site power: 6261W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 charge power: 4374W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 charger status: C
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 next soc poll remaining time: 4m50s
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 vehicle soc: 63%
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 max charge current: 0.0A = 6.3A + -9.1A (6261W @ 3p)
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 site power 6261W >= disable threshold 0W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 pv disable timer elapsed
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 pv max charge current: 0A
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:06 charger disable: contactor delay 2m29s
evcc    | [lp-1  ] INFO 2021/05/09 06:51:12 set charge mode: off
evcc    | [site  ] DEBUG 2021/05/09 06:51:12 ----
evcc    | [site  ] DEBUG 2021/05/09 06:51:12 pv power: 323W
evcc    | [site  ] DEBUG 2021/05/09 06:51:12 grid power: 6440W
evcc    | [site  ] DEBUG 2021/05/09 06:51:12 site power: 6440W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:12 charge power: 4374W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:12 charger status: C
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:12 next soc poll remaining time: 4m53s
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:12 vehicle soc: 63%
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:12 charger disable
evcc    | [site  ] DEBUG 2021/05/09 06:51:16 ----
evcc    | [site  ] DEBUG 2021/05/09 06:51:16 pv power: 323W
evcc    | [site  ] DEBUG 2021/05/09 06:51:16 grid power: 6272W
evcc    | [site  ] DEBUG 2021/05/09 06:51:16 site power: 6272W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:16 charge power: 0W
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:16 charger status: C
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:16 next soc poll remaining time: 4m56s
evcc    | [lp-1  ] DEBUG 2021/05/09 06:51:16 vehicle soc: 63%

Die Grafik um UI ändert sich zwar gemäß der Einstellungen, aber wie man am Grid Power sieht, zieht das Auto ordentlich Strom (ist im Auto auf "min" gestellt").

Der DIP 10 in der Wallbe ist auf "ON".

Hier die evcc.yaml

# log settings
log: debug
levels:
  core: debug
  lp-1: debug
  lp-2: debug

meters:
  - type: default
    name: solarlog
    power:
      type: mqtt
      topic: solarlog/ac
      timeout: 30s # don't accept values older than timeout
      scale: 1000 # floating point factor applied to result, e.g. for Wh to kWh conversion
  - type: default
    name: ace3000
    power:
      type: mqtt
      topic: solarlog/power
      timeout: 30s # don't accept values older than timeout

vehicles:
  - type: default
    name: Kona1
    title: Kona1 # display name for UI
    capacity: 64 # kWh
    charge:
      type: mqtt
      topic: tronity/TMAK....
      jq: .level
  - type: default
    name: Kona2
    title: Kona2 # display name for UI
    capacity: 64 # kWh
    charge:
      type: mqtt
      topic: tronity/TMAK....
      jq: .level

chargers:
  - type: wallbe
    name: wallbox
    uri: 192.168.0.8:502 # TCP ModBus address
    legacy: false # enable for older Wallbes with Phoenix EV-CC-AC1-M3-CBC-RCM controller

loadpoints:
  - title: Stellplatz1 # display name for UI
    charger: wallbox # charger reference
    vehicles:
      - Kona2
    mode: pv
    soc:
      # polling defines usage of the vehicle APIs
      # Modifying the default settings it NOT recommended. It MAY deplete your vehicle's battery
      # or lead to vehicle manufacturer banning you from API use. USE AT YOUR OWN RISK.
      poll:
        # poll mode defines under which condition the vehicle API is called:
        #   charging: update vehicle ONLY when charging (this is the recommended default)
        #   connected: update vehicle when connected (not only charging), interval defines how often
        #   always: always update vehicle regardless of connection state, interval defines how often
        mode: always
        # poll interval defines how often the vehicle API may be polled if NOT charging
        interval: 5m
      min: 0 # immediately charge to 0% regardless of mode unless "off" (disabled)
      target: 80 # always charge to 100%
      levels:
        - 50
        - 80
        - 90
        - 100
      estimate: false # set true to interpolate between api updates
    onDisconnect: # set defaults when vehicle disconnects
      mode: pv # switch back to pv mode
      targetSoC: 80 # charge to 100%
    maxcurrent: 16 # maximum charge current (default 16A)
    mincurrent: 6
    phases: 3

[andig]

Ich vermute Dip 10 ist falsch rum. Jdfls wird die Wallbe anscheinend nicht kontrolliert.

[premultiply]

Wenns da nicht drin steht schau mal in der Original-Anleitung des verbauten Phoenix-Controllers.

[mclane]

Evtl. muss man den Schlüsselschalter deaktivieren, d.h. DIP7 auf off. Siehe auch Wiki

[MehrCurry]

Ich hab jetzt den Schlüsselschalter auf "off" und nun arbeitet evcc korrekt.

[MehrCurry]

Ich habe eine Box aus 2020, die hat keinen Phoenix Controller mehr, wenn ich die Threads richtig gelesen habe.

[premultiply]

Doch, doch. Auch wenn er als Wallbe gebrandet ist und eine von Wallbe modifizierte Firmware hat. Die Hardware ist die gleiche (und die Firmware in der Grundfunktion auch).
Guckst du hier: https://www.phoenixcontact.com/online/portal/de?uri=pxc-oc-itemdetail:pid=1018701&library=dede&tab=1