Entladung des Hausspeichers verhindern (bei günstigem Börsenstrom) #6788
Replies: 7 comments 32 replies
-
Über evcc geht das leider nicht, ich habe mir den plenticore Adapter im iobroker installiert. In der neuesten Version hat dieser die Batteriesteuerung integriert und man kann sich leicht über ein Script die Lade/Entladesteuerung nach verschiedenen Bedingungen umsetzen. |
Beta Was this translation helpful? Give feedback.
-
Und wie greifst du die Daten von evcc ab? Ich hab gesehen, dass die Rest Api die Zeiten für die geplante Ladung angerufen werden können. Hab ich aber noch nicht mit Erfolg hin gekriegt. Welche Werte vom Plenticore Adapter steuerst du da? |
Beta Was this translation helpful? Give feedback.
-
Anbei eine Erklärung wie man das für die Geräte von E3/DC machen kann:
Ich mache das aktuell abhängig von evcc über Home Assistant. Wenn evcc via MQTT meldet, dass ein Loadpoint Weiterhin deaktiviere ich die Wetterprognose sobald an einem der Ladepunkte ein Fahrzeug |
Beta Was this translation helpful? Give feedback.
-
Ich habe es bei mir derzeit so gelöst: Über eine Automation überwache ich die Ladeleistung der Easee und sobald diese auf über 10kW geht wird die "Backup Reserve" auf 100% gestellt. Wenn die Ladung wieder unter 9kW geht stelle ich sie sie wieder auf die normalen 0. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Hier gibts ja jetzt einige technische Details, wie sich Entladung verhindern ließe. Das betrifft m.E. ausschließlich Sofortladen, ggf. auch Min+PV. Gibts denn Vorstellungen, unter welchen Bedingungen die Entladung vermieden werden sollte? |
Beta Was this translation helpful? Give feedback.
-
Die Batterieentladung mit einem kleinen Shellscript oder ähnlichem per Modbus ab und wieder anzuschalten ist ja nicht so aufwändig. |
Beta Was this translation helpful? Give feedback.
-
Hallo Zusammen,
ich habe einen Hausspeicher und Tibber als Börsenstrompreis.
EVCC wählt im Falle vom Zielladen automatisch die Zeit, mit dem günstigsten Preis.
Jetzt wäre es sinnvoll, automatisch hier das entladen des Hausspeichers zu verhindern. In meinem Fall (Kostal Plenticore mit BYD-Batterie) muss ich dazu das Modbus-Register 1034 auf 0 setzen.
Ist so etwas direkt aus evcc möglich oder muss ich dazu den Umweg über node red oder ähnliches gehen.
Hat jemand so etwas umgesetzt? Ziel wäre, das Entladen nur bei den geplanten Ladevorgängen in der Nacht zu deaktivieren und danach wieder zu aktivieren.
Gruß
Beta Was this translation helpful? Give feedback.
All reactions