SDM630 in EVCC via iobroker und MQTT intergieren #2206
-
Hallo Leute bei mir läuft EVCC in Verbindung mit einer E3DC und einer EVSE Wifi (ohne Stromzähler). Die Strommessung wir mit einem SDM63 erledigt, die Daten sammel ich im IObroker ein und zeige diese auf einer Vis an. Den MQTT Broker habe ich auch in meinem IObroker laufen, die Daten aus der ECVV werden auch in den IObroker übertragen. Ich schaffe es aber nicht Daten aus dem IObroker in die EVCC (Watt und Kwh) zu laden, um den Stromverbrauch des Ladepunkts anzuzeigen. Der Datenpunkt im IObroker heißt " mqtt.0.sdm630mqttWallbox " Hier mal meine evcc.yaml uri: 0.0.0.0:7070 # uri for ui
interval: 10s # control cycle interval
log: info
meters:
- type: template
template: e3dc
usage: grid
host: 192.168.178.104
port: 1024
name: grid1
- type: template
template: e3dc
usage: pv
host: 192.168.178.104
port: 1024
name: pv2
- type: template
template: e3dc
usage: battery
host: 192.168.178.104
port: 1024
name: battery3
chargers:
- type: template
template: evsewifi
host: 192.168.178.57
name: wallbox4
loadpoints:
- title: Hyndai
charger: wallbox4
name: charge
mode: pv
phases: 3
mincurrent: 6
maxcurrent: 32
resetOnDisconnect: true
site:
title: Ioniq 5
meters:
grid: grid1
pvs:
- pv2
batteries:
- battery3
name: charge
type: custom
power:
source: mqtt
topic: mqtt.0.sdm630mqttWallbox
# mqtt message broker
mqtt:
broker: 192.168.178.56:1883
topic: evcc # root topic for publishing, set empty to disable publishing
# user:
# password: |
Beta Was this translation helpful? Give feedback.
Replies: 6 comments 9 replies
-
Hallo, das Problem mit iobroker > mqtt > evcc habe ich auch und hab dafür keine Lösung gefunden. Ich hoffe, dass die Entwickler danach mal schauen. |
Beta Was this translation helpful? Give feedback.
-
Das sagt mein Logfile.
|
Beta Was this translation helpful? Give feedback.
-
Dieser Teil der Konfiguration kann nicht funktionieren:
Du musst den Meter als eigenes Element unter |
Beta Was this translation helpful? Give feedback.
-
Davon abgesehen wäre es funktional besser den SDM630 als Chargemeter direkt per Modbus an evcc anzubinden und dann die Daten zur weiteren Verwendung (falls erforderlich) in iobroker per MQTT zu holen. |
Beta Was this translation helpful? Give feedback.
-
So hab es versucht klappt aber leider nicht....
Da hab ich wohl ein Denkfehler |
Beta Was this translation helpful? Give feedback.
-
Mein Problem war, dass ich die Doku nicht eschnallt habe, also nicht in meine Config umsetzten konnte. Mit der Config von DerAndereAndi hat die Datenübertragung dann sofort funktioniert. Vielen Dank |
Beta Was this translation helpful? Give feedback.
Dieser Teil der Konfiguration kann nicht funktionieren:
Du musst den Meter als eigenes Element unter
meters
konfigurieren, siehe https://docs.evcc.io/docs/reference/configuration/meters#customUnd dann im loadpoint als charger angeben, siehe https://docs.evcc.io/docs/reference/configuration/loadpoints/#charger