MQTT Meter problem

[19Zlosch89]

Hallo,
ich habe mir zwei Zähler (grid + pv garage) per MQTT eingebunden und das Log zeigt folgende Fehlermeldung:

pi@raspberrypi:/etc $ sudo journalctl -fau evcc 
-- Journal begins at Sat 2021-08-07 05:58:23 CEST. --
Jan 03 14:30:35 raspberrypi evcc[8704]: [main  ] INFO 2022/01/03 14:30:35 listening at 192.168.178.50:7070
Jan 03 14:30:35 raspberrypi evcc[8704]: [mqtt  ] INFO 2022/01/03 14:30:35 connecting evcc-2093120810 at tcp://192.168.178.50:1883
**Jan 03 14:30:37 raspberrypi evcc[8704]: [main  ] FATAL 2022/01/03 14:30:37 failed configuring site: 1 error(s) decoding:
Jan 03 14:30:37 raspberrypi evcc[8704]: * 'Meters' expected a map, got 'string'**
Jan 03 14:30:37 raspberrypi systemd[1]: evcc.service: Main process exited, code=exited, status=1/FAILURE
Jan 03 14:30:37 raspberrypi systemd[1]: evcc.service: Failed with result 'exit-code'.

die Zähler werden jedoch mit folgendem Befehl einwandfrei erkannt:

pi@raspberrypi:/etc $ evcc meter -l debug       
[main  ] INFO 2022/01/03 14:26:09 evcc 0.78 (159e0304)
[main  ] INFO 2022/01/03 14:26:09 using config file /etc/evcc.yaml
[mqtt  ] INFO 2022/01/03 14:26:09 connecting evcc-402047699 at tcp://192.168.178.50:1883
[mqtt  ] DEBUG 2022/01/03 14:26:09 tcp://192.168.178.50:1883 connected
pv grage
--------
[mqtt  ] DEBUG 2022/01/03 14:26:09 iobroker/hm-rpc/1/000B9BE9943D5E/5/POWER wait for initial value
Power:  129W
Energy: 72.9kWh
grid
----
[mqtt  ] DEBUG 2022/01/03 14:26:14 iobroker/hm-rpc/0/REQ0847519/1/IEC POWER wait for initial value
Power:  111W
Energy: 6899.7kWh

Meine meters Config sieht so aus:

meters:
- name: grid
  type: custom
  power:
     source: mqtt
     broker: 192.168.178.50
     user: ######
     password: #########
     topic: iobroker/hm-rpc/0/REQ0847519/1/IEC POWER
     scale: 1 # floating point factor applied to result, e.g. for Wh to kWh conversion
  energy:
     source: mqtt
     broker: 192.168.178.50
     user: mqtt
     password: #########
     topic: iobroker/hm-rpc/0/REQ0847519/1/IEC ENERGY COUNTER
     scale: 1 # floating point factor applied to result, e.g. for Wh to kWh conversion

- name: pv grage
  type: custom
  power:
     source: mqtt
     broker: 192.168.178.50
     user: ######
     password: #########
     topic: iobroker/hm-rpc/1/000B9BE9943D5E/5/POWER
     scale: 1.0 # floating point factor applied to result, e.g. for Wh to kWh conversion
  energy:
     source: mqtt
     broker: 192.168.178.50
     user: ######
     password: #########
     topic: iobroker/hm-rpc/1/000B9BE9943D5E/5/ENERGY COUNTER
     scale: 0.001 # floating point factor applied to result, e.g. for Wh to kWh conversion

Hat jemand einen Tipp wie ich die Fehlermeldung behoben bekommen? Die Wallbox und das Auto gehen problemlos.
Besten Dank im Voraus.

[premultiply]

Bitte die ganze Konfig inkl. site. Da steckt der Fehler.

[19Zlosch89]

anbei die komplette konfig

meters:
- name: grid
  type: custom
  power:
     source: mqtt
     broker: 192.168.178.50
     user: ######
     password: #########
     topic: iobroker/hm-rpc/0/REQ0847519/1/IEC POWER
     scale: 1 # floating point factor applied to result, e.g. for Wh to kWh conversion
  energy:
     source: mqtt
     broker: 192.168.178.50
     user: mqtt
     password: #########
     topic: iobroker/hm-rpc/0/REQ0847519/1/IEC ENERGY COUNTER
     scale: 1 # floating point factor applied to result,

- name: pv grage
  type: custom
  power:
     source: mqtt
     broker: 192.168.178.50
     user: ######
     password: #########
     topic: iobroker/hm-rpc/1/000B9BE9943D5E/5/POWER
     scale: 1.0 # floating point factor applied to result, e.g. for Wh to kWh conversion
  energy:
     source: mqtt
     broker: 192.168.178.50
     user: ######
     password: #########
     topic: iobroker/hm-rpc/1/000B9BE9943D5E/5/ENERGY COUNTER
     scale: 0.001 # floating point factor applied to result, e.g. for Wh to kWh c

chargers:
- type: template
  template: easee
  user:  #########
  password:  ############
  charger: EH#####
  name: wallbox

vehicles:
- type: template
  template: skoda
  title: Enyaq
  user: ########
  password: #############
  vin: TMB##############
  capacity: 80
  name: skoda

loadpoints:
- title: Garage
  charger: wallbox
  vehicles:
  - skoda
  mode: minpv
  phases: 3
  mincurrent: 6
  maxcurrent: 16
  resetOnDisconnect: false

site:
  title: Home
  meters: grid
  pvs:
  -  pv garage

sponsortoken: ey##################

[premultiply]

Vor pv garage ist nach dem - ist wohl ein Leerzeichen zu viel. Und das Leerzeichen zwischen pv und garage im Namen macht eventuell auch Probleme. Da bin ich mir aber nicht sicher.

[Kami0612]

- name: pv grage     <= Schreibfehler?!, ein "a" fehlt
  type: custom
  power:

site:
  title: Home
  meters: grid
  pvs:
  -  pv garage

[19Zlosch89]

Trotz Korrektur meines Schreibfehlers und Entfernung evtl. zu vieler Leerzeichen bekomm ich noch immer dieselbe Fehlermeldung. Noch wer eine Idee?

pi@raspberrypi:/etc $ sudo journalctl -fau evcc
-- Journal begins at Sat 2021-08-07 05:58:23 CEST. --
Jan 03 20:02:23 raspberrypi systemd[1]: Started evcc.
Jan 03 20:02:23 raspberrypi evcc[20178]: [main ] INFO 2022/01/03 20:02:23 evcc 0.78 (159e030)
Jan 03 20:02:23 raspberrypi evcc[20178]: [main ] INFO 2022/01/03 20:02:23 using config file /etc/evcc.yaml
Jan 03 20:02:23 raspberrypi evcc[20178]: [main ] INFO 2022/01/03 20:02:23 listening at 192.168.178.50:7070
Jan 03 20:02:23 raspberrypi evcc[20178]: [mqtt ] INFO 2022/01/03 20:02:23 connecting evcc-725623444 at tcp://192.168.178.50:1883
Jan 03 20:02:26 raspberrypi evcc[20178]: [main ] FATAL 2022/01/03 20:02:26 failed configuring site: 1 error(s) decoding:
Jan 03 20:02:26 raspberrypi evcc[20178]: * 'Meters' expected a map, got 'string'
Jan 03 20:02:26 raspberrypi systemd[1]: evcc.service: Main process exited, code=exited, status=1/FAILURE
Jan 03 20:02:26 raspberrypi systemd[1]: evcc.service: Failed with result 'exit-code'.
Jan 03 20:02:26 raspberrypi systemd[1]: evcc.service: Consumed 1.066s CPU time.
Jan 03 20:02:26 raspberrypi systemd[1]: evcc.service: Scheduled restart job, restart counter is at 33.
Jan 03 20:02:26 raspberrypi systemd[1]: Stopped evcc.