EVCC in Verbindung mit KEBA Wallboxen im Ladeverbund #16644
Replies: 2 comments 9 replies
-
du kannst doch per lastmanagement die leistung beider wallboxen in summe auf z.B. 11 kW begrenzen. so in der richtung:
|
Beta Was this translation helpful? Give feedback.
-
Die Frage geht an Keba. Immer blöd, wenn zwei Einheiten steuern. Vmtl. schaut Keba nur auf freigegebenen Strom, nicht auf tatsächlich geladenen. Und dann bleiben die 6A der "fertigen" Box halt immer belegt falls evcc die nicht abgeschaltet hat. Könntest Du testen indem Du mal einen Ladepunkt auf "off" stellst. |
Beta Was this translation helpful? Give feedback.
-
Hi zusammen,
ich habe folgende Situation: Wir haben bei uns in der Garage 2 KEBA Wallboxen. Bei den Wallboxen handelt es sich einmal um die P30X und einmal um die P30C. Die beiden Wallboxen sind in einem Ladeverbund konfiguriert, da diese nur an einer Stromleitung installiert sind. Die Steuerung über EVCC funktioniert jede Wallbox einzeln betrachtet sehr gut. Jedoch im Ladeverbund nicht optimal. Wenn beide eAutos angesteckt sind, sollen beide nur mit 50% (bei uns 6A) geladen werden. Das klappt auch mit PV-Überschuss hervorragend. Jedoch sobald ein eAuto vollgeladen ist, erhält das andere eAuto weiter nur die halbe (o.g. 6A) und nicht wie man erwarten würde die volle mögliche Ladeleistung.
Ich hatte dazu bereits Kontakt mit Keba aufgenommen, da ich ein Problem / Fehler auf deren Seite vermute. Jedoch hat ein Test ohne evcc gezeigt, dass die Steuerung des Ladeverbunds ohne evcc wie erwartet funktioniert - das eAuto was voll geladen ist stoppt den Ladevorgang und das andere eAuto erhält die volle mögliche Ladeleistung. Keba teilte mir mit, dass vermutlich ein Steuerungskommando die Wallbox weiter im Modus "bin bereit für das Lade" hält und daher die P30X weiter nur die halbe Leistung zulässt.
Frage an @andig und ggf. andere Keba Nutzer: Ist das "Problem" bekannt? Gibt es seitens evcc eine Möglichkeit das o.g. Problem zu beheben?
PS: Derzeit behebe ich die Situation per "Turnschuh-Netzwerk" ;-) heißt - ich stecke das vollgeladene eAuto einfach ab, um die volle Ladeleistung zu erhalten.
Danke vorab
Beta Was this translation helpful? Give feedback.
All reactions