You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Die Idee entstand aus einem Blick auf die Graphiken hier #16389
("Tibber-Preise aus Entso-E-Daten vorhersagen?")
hier #9111 ("Stromkosten für Ladepunkt als Grenzkosten anzeigen") gibt's evtl. kompatible/ergänzende Denke dazu.
Grundgedanke, der mir schon lange im Kopf rum geistert:
wenn der Strom genug/billig ist, könnte doch eine Gefriertruhe auch mal auf -25°C abkühlen
wenn der Strom rar / teuer ist, dann reicht es ggf auch über ein paar Stunden auf -16°C zu halten
Speichern im Prozess, wenn der das her gibt, statt in einem extra/teuren Speicher
Nagelt mich nicht auf die exakten Werte fest, es geht um's Prinzip.
(Ich habe - Pi x Daumen - unterstellt, daß bei -16°C der Inhalt noch nicht leidet, und unter -25°C die Kiste so viel Verlust macht, daß es selbst bei geschenktem Strom kaum lohnt)
Aus o.g "tibber-Prognose-Versuch" habe ich z.B: folgende Daten erhalten:
Wollen wir uns hier nicht streiten, wie genau wir tatsächlich die tibber-Preise treffen - dazu #16389
Jedenfalls liefern die Spotmarktpreise auf entso-E einen Indikator
wann Stromverbrauch netzdienlich ist
wann Stromverbrauch CO2-akzeptabel ist (soweit man an die anthopogene Kausalität glauben möchte...)
was uns in Zukunft an Stromverfügbarkeit begegnen könnte
Da nun diese Preise - dank evcc 🙇♀️ 👍 - minütlich über meinen mosquitto-MQTT tuckern - wäre es nicht naheliegend, damit Gefriertruhen etc zu steuern?
Zugegeben, für evcc ist das ein "feature creep", der über das eigentliche Ziel (Auto laden) hinaus geht.
Und vermutlich gibt es schon viele HMS, die das schon lange so ähnlich können?
Bin ich grad' dabei, das Rad neu zu erfinden? ... egal ...
Von den verfügbaren Werten weckt vor allem tariffPriceLoadpoints meine Neugier.
wenn kein Auto geladen wird, dann dürfte das vermutlich den Grenzkostensatz der "nächsten verbrauchten Wattsekunde" wiedergeben
wenn ein Auto lädt, liegt der Satz zwischen den Grenzkosten des Heimverbrauches und der Autoladung, d.h. wenn wir Verbraucher damit steuern, würden sich die wohl den Überschuss mit dem Auto teilen. Einzelheiten sind dann Einsteins berüchtigte "90 % Transpiration".
Beispiele:
Gefriertruhe:
minus 25 ° bei 10 ct,
nicht kälter, selbst wenn der Strom geschenkt ist,
minus 16 °C bei 35 ct,
das halten wir, koste der Strom was er wolle
Nebenräume kühlen: 22°C bei 10 ct, 26 °C bei 30 ct
Nebenräume heizen: 20 °C bei 10 ct, 15 °C bei 30 ct
Warmwasser heizen: 70°C bei 10 ct, 50 °C bei 30 ct
alte Bleiakkus laden: 100 % bei 12 ct, 10 % bei 15 ct
alte Bleiakkus entladen (d.h. Einspeisen): ab 25 ct mit 2 kW fix (technisch bedingt)
usw. usf.
Letztlich haben alle angeführten Beispiele eines gemeinsam: sie bedienen einen Energiespeicher.
Der geladen wird, wenn billig, und nicht / entladen wenn Strom teuer.
Also würde z.B die Gefriertruhe nachts und mittags ("M-Kurve") mehr laufen als morgends/abends, wenn der Strom ohnehin
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Die Idee entstand aus einem Blick auf die Graphiken hier #16389
("Tibber-Preise aus Entso-E-Daten vorhersagen?")
hier #9111 ("Stromkosten für Ladepunkt als Grenzkosten anzeigen") gibt's evtl. kompatible/ergänzende Denke dazu.
Grundgedanke, der mir schon lange im Kopf rum geistert:
Nagelt mich nicht auf die exakten Werte fest, es geht um's Prinzip.
(Ich habe - Pi x Daumen - unterstellt, daß bei -16°C der Inhalt noch nicht leidet, und unter -25°C die Kiste so viel Verlust macht, daß es selbst bei geschenktem Strom kaum lohnt)
Aus o.g "tibber-Prognose-Versuch" habe ich z.B: folgende Daten erhalten:
Wollen wir uns hier nicht streiten, wie genau wir tatsächlich die tibber-Preise treffen - dazu #16389
Jedenfalls liefern die Spotmarktpreise auf entso-E einen Indikator
Da nun diese Preise - dank evcc 🙇♀️ 👍 - minütlich über meinen mosquitto-MQTT tuckern - wäre es nicht naheliegend, damit Gefriertruhen etc zu steuern?
Zugegeben, für evcc ist das ein "feature creep", der über das eigentliche Ziel (Auto laden) hinaus geht.
Und vermutlich gibt es schon viele HMS, die das schon lange so ähnlich können?
Bin ich grad' dabei, das Rad neu zu erfinden? ... egal ...
Von den verfügbaren Werten weckt vor allem
tariffPriceLoadpoints
meine Neugier.Beispiele:
minus 25 ° bei 10 ct,
nicht kälter, selbst wenn der Strom geschenkt ist,
minus 16 °C bei 35 ct,
das halten wir, koste der Strom was er wolle
usw. usf.
Letztlich haben alle angeführten Beispiele eines gemeinsam: sie bedienen einen Energiespeicher.
Der geladen wird, wenn billig, und nicht / entladen wenn Strom teuer.
Also würde z.B die Gefriertruhe nachts und mittags ("M-Kurve") mehr laufen als morgends/abends, wenn der Strom ohnehin
ist.
Beta Was this translation helpful? Give feedback.
All reactions