Hausbatterie wird trotz Ladesperre entladen #16516
Replies: 9 comments 7 replies
-
Klingt ähnlich wie #15661 |
Beta Was this translation helpful? Give feedback.
-
Also eher nochmal ein downgrade von evcc durchführen. |
Beta Was this translation helpful? Give feedback.
-
Naja ich werde mir morgen im Tripower oder Sunnyportal die Batterie mal anschauen ob da etwas einzustellen ist. |
Beta Was this translation helpful? Give feedback.
-
SHM braucht FW 2.15 |
Beta Was this translation helpful? Give feedback.
-
Hiermal ein Ausszug aus dem Log, nachdem ich Schnellladen gestartet habe [site ] DEBUG 2024/10/06 12:18:48 ---- Hier mein Setup: open evcc at http://evcc.local:7070network: log: debug unique installation idplant: ee91b7f3e8d98549aacd2f875688f794247582de662caa4c440c1bd94668dfa8 interval: 30s # control cycle interval telemetry: false meters:
chargers:
vehicles:
loadpoints:
site: hems: |
Beta Was this translation helpful? Give feedback.
-
Ich habe ein ähnliches Problem: Bei mir wird der Stromspeicher des Hauses auch zum Laden der Autobaterie geleert, obwohl "Verhindere Entladung im Schnell-Modus und bei geplantem Laden" aktiviert ist. Und zwar sowohl bei, "Schnell laden", "Geplantem Laden Abfahrt" und "Geplantem Laden Ankunft". Möglicherweise gibt folgende häufige Fehlermeldung aus den Logs einen Hinweis auf die Ursache, des oben beschriebenen Fehlverhaltens: Wenn mir jemand hier Tipps geben könnte, würde ich mich sehr freuen: Schon jetzt vielen Dank. |
Beta Was this translation helpful? Give feedback.
-
Danke, dass du dir das ansehen willst Zur Konfiguration: PV-Anlage:
Wallboxen: Mir scheint, dass die Komponenten der PV-Anlage zwar Daten wie Ladestand der Batterie, aktuelle Leistung der Solarmodule,... preisgeben, sich aber nicht von EVCC steuern lassen. (Ich gehe davon aus, dass die Ladeleistung für die Autos über die Wallboxen gesteuert wird.) Hier die Konfiguration in der evcc.yaml. Vielleicht liegt da ja auch was im Argen: meters:
chargers:
loadpoints:
|
Beta Was this translation helpful? Give feedback.
-
Doch noch ein paar Verständnisfragen:
Schon jetzt vielen Dank |
Beta Was this translation helpful? Give feedback.
-
Hallo allerseits.
Mittlerweile läuft mein evcc einigermaßen. Das Ganze auch Dank des super Forums hier.
Jetzt habe ich mal per Schnelladen versucht mein Akku vom Kona zu laden.
Obwohl ich die Ladesperre gesetzt habe wird der Hausakku aber trotzdem entladen und das nicht zu wenig. Siehe Bilder.
Habe ich da irgendetwas übersehen bei den Einstellungen.
Ich habe einen SMA Tripower als Wechselrichter und BYD HVS 12,8
Ich danke euch schonmal für's weiter helfen.
Beta Was this translation helpful? Give feedback.
All reactions