Hoymiles HMS-800W-2T Template hinzufügen #15104
-
Der HMS-800W-2T hat ein eigenes WLAN-Modul, über das er auch zB im Homeassistant eingebunden werden kann. Per Modbus ist er nicht erreichbar. Ich entschuldige mich schonmal dafür, wenn ich hier nicht die richtige Form für so eine Anfrage eingehalten habe, ist mein erstes Feature-Request auf Git... |
Beta Was this translation helpful? Give feedback.
Replies: 5 comments 10 replies
-
Gibts Informationen, wie das API aussieht? Sonst würde es sich anbieten, das einfach aus HA über ein custom meter zu integrieren. Es macht eigentlich wenig Sinn, jedes Gerät in evcc nachzubauen, das in HA schon funktioniert. |
Beta Was this translation helpful? Give feedback.
-
Ich finde keine Infos über die API, in Homeassistant funktioniert es aber einwandfrei. |
Beta Was this translation helpful? Give feedback.
-
Am einfachsten ist es wenn du in Home Assistant eine Automatisierung erstellst die per mqtt die Werte vom Hoymiles schickt und in evcc erstellst du ein pv Meter mit der source "mqtt" |
Beta Was this translation helpful? Give feedback.
-
MQTT läuft und der Hoymiles schickt seine Werte da bereits rein, ich habe auch eine Entität für die aktuelle Leistung: sensor.hoymiles_gateway_solarh_2929650_real_power |
Beta Was this translation helpful? Give feedback.
-
Dann ist der Weg nicht mehr weit. https://docs.evcc.io/docs/devices/meters#manuell Ein manuelles Meter anlegen und die source als mqtt festlegen. Topic eintragen und schon läuft es. |
Beta Was this translation helpful? Give feedback.
Ich habe da leider keine Ahnung wie dein Setup genau aussieht und wie das publish bei dir aussieht.
Was aber immer funktioniert: wie oben gesagt, erstelle eine neue Automatisierung mit dem Trigger "Wertänderung des sensors" und als Aktion setzt du mqtt publish mit Payload "Sensor Wert".
Edit: das sieht dann zb so aus: