Einstellungen am Fronius Symo Gen 24 #14915
Replies: 4 comments 4 replies
-
https://docs.evcc.io/docs/faq#connection-refused |
Beta Was this translation helpful? Give feedback.
-
Du solltest das als Code formatieren damit es besser lesbar wird. Zähleradresse im Webinterface vom Wechselrichter auf 200 stellen. |
Beta Was this translation helpful? Give feedback.
-
Um die Frage von @VolkerK62 zu ergänzen: Hast Du Modbus-TCP am Symo (benötigt Techniker-Passwort) aktiviert? Andernfalls wirst Du nur über die Fronius SolarAPI mit dem WR kommunizieren können. |
Beta Was this translation helpful? Give feedback.
-
I have Gen24 and it is working perfect. Those are the settings.
|
Beta Was this translation helpful? Give feedback.
-
Hallo Community,
ich habe folgendes Set-up:
Fronius Symo Gen24, Fronius Smart Meter, Keba P30c, Nissan Leaf
evcc startet nicht und als Fehler bekomme ich Protokolle angezeigt:
[main ] INFO 2024/07/17 20:51:42 evcc 0.128.2
[main ] INFO 2024/07/17 20:51:42 using config file: /config/evcc.yaml
[main ] INFO 2024/07/17 20:51:42 listening at :7070
[main ] FATAL 2024/07/17 20:51:42 cannot create meter 'my_pv': cannot create meter type 'template': cannot create meter type 'custom': power: add[0]: dial tcp 192.168.xxx.xxx:502: connect: connection refused
[main ] FATAL 2024/07/17 20:51:42 will attempt restart in: 15m0s
Using config file: /config/evcc.yaml
In HA die erste komplexere Integration, und keinerlei Programmierkenntnnise, könnten also echt dumme Fehler drin sein ;)
Wenn jemand mir helfen kann, ich wäre dankbar. Kann es ggfs. auch an den Fronius Einstellungen liegen? Modus Schnittstelle RTU 0 und 1 sind auf "Master", Slave als Modbus TCP aktiviert, Port: 502, Sunspec: float: Zähleradresse 240
evcc.yaml lautet auf Basis von evcc.dist.yaml wie folgt (die xxx.xxx sind selbstverständlich die richtigen IP Adressen der jeweiligen Geräte):
[der Rest von evcc.dist.yaml ist unverändert]
Beta Was this translation helpful? Give feedback.
All reactions