SMA Home Manager Modbus #14097
Replies: 12 comments 71 replies
-
Also bei mir läuft die Batteriesteuerung seit dem Update vom SMA (HM2) nicht mehr. Weder manuell über die Register 40151 und 40149 noch über evcc. Das hat bis dato funktioniert. SMA Sunny Tripower 8.0 SE |
Beta Was this translation helpful? Give feedback.
-
Das ganze ist ein wenig Strange was SMA da verbrochen hat. Im Grunde geht es bei EVCC, so wie ich es verstanden habe, nun hauptsächlich um die Probleme der nicht möglichen Batterieentladeverhinderung (!) beim Schnelllden. Hier griff EVcC direkt auf die Register zu, welche jetzt vom SHM Manager als Hoheitsrecht benutzt werden. Beim SBS 3.7… sind es wohl andere Register und es geht noch. Workaround bis SMA was auf die Reihe bringt : -die Variante als Energy Meter, dann ist aber sunnyportal etc. tot.
der Zugriff auf den SHM erfordert einen Grid Guard Code. Den bekommt man aber mittlerweile auch als normaler „Elektriker“ .
Wir hoffen ja alle SMA hört hier auch mal auf seine Kunden und ihr eigenes , aktuell sehr hohes, Ego kommt ein wenig runter…. |
Beta Was this translation helpful? Give feedback.
-
Ich komme erst indirekt über meine Diskussion #14202 hier rein.
Da hört für mich dann aber der Spass auf! Kann mir jemand die Info geben wann von SMA der letzte Update auf welche Version erfolgt ist mit der das nicht mehr geht?! Vielen Dank! |
Beta Was this translation helpful? Give feedback.
-
Ich hatte Ende Mai einen Absturz vom SMA SHM weswegen ich einen Reset machen musste. Leider war ich damals zu blöd den Reset Button so lange zu drücken bis er sich neu gestartet hat ohne alle Daten zu löschen (und habe daher im Logbuch keine History davor mehr) ... OK, über das lokale Web Interface finde ich die wenigstens: Ich werde gleich noch einmal versuchen mit dem Schneider Electric Modbus Simulator den Speicher manuell zu sperren. |
Beta Was this translation helpful? Give feedback.
-
Na ja, ich hoffe ich komme wenigstens so mit einem Downgrade weiter. |
Beta Was this translation helpful? Give feedback.
-
Den SHM kannst du nicht manuell downgraded. Ist laut SMA auch nicht vorgesehen. In der geräteübersicht im Portal findest du deine aktuelle FW |
Beta Was this translation helpful? Give feedback.
-
Ich bin sicher bei der Installation der Anlage hätte ich die Steuerung über Modbus/TCP erst freigeben müssen. Vielleicht muss das nach dem Firmware Update erneut erfolgen. Mein erster Firmware Update hat im November 23 stattgefunden, der Update auf 2.14 erst Ende April. Seitdem funktioniert die Steuerung über Modbus wohl nicht mehr ... |
Beta Was this translation helpful? Give feedback.
-
Stop, Rolle rückwärts: ohne den SHM geht der Speicher während des PV Ladens nicht auf Entladen. evcc regelt die Wallbox auf Minimum, der Speicher wird aber nicht genutzt sondern es geht in den Netzbezug. Erst als der SHM wieder seine Netzverbindung zum Wechselrichter bekam wurde der Speicher genutzt um die Differenz zwischen PV Überschuss (~500 W) und minimaler Ladeleistung (~1,2 kW) zu überbrücken (heute regnet es, deswegen kaum PV Überschuss). |
Beta Was this translation helpful? Give feedback.
-
Hallo, gibt´s hier evtl. einen Link zu der Diskussion im SMA-Forum? Mit freundlichem Gruß |
Beta Was this translation helpful? Give feedback.
-
Neue Infos von SMA hier: https://www.facebook.com/share/p/fQA6EQReZwoQBDyb/ |
Beta Was this translation helpful? Give feedback.
-
Danke für den Hinweis!
Sowas kommuniziert SMA via Facebook??? Was ist denn das für eine seltsame
Kommunikationspolitik?
So etwas gehört doch in ein firmeneigenes Blog oder Forum und dann ggf.
noch von extern angelinkt via Twitter oder Mastodon oder von mir aus auch
via Link auf FaceBook…
Aber dennoch gut, dass SMA das Problem adressieren und dabei die Community
mit einbinden will.
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Im SMA Forum gibt es gerade Diskussionen weil ein Update die Möbus Steuerung der Batterie WR überschreiben soll.
Benötigt man den SHM mit Evcc.io überhaupt unbedingt? Kann da nicht ein einfacher Energy Meter rein mit den WRs und dem Batterie WR spricht euch ja direkt? Also braucht Evi ja eigentlich nur den hausverbrauch irgendwo her.
Disclaimer: aktuell läuft evcc bei mir und nem andern User im SMA Forum noch rund.
Beta Was this translation helpful? Give feedback.
All reactions