Replies: 8 comments 102 replies
-
Wie du ja selbst bereits festgestellt hast ist die Chance und Notwendigkeit zuhause bei typischen EFH-PV-Anlagen und EFH-Wohnsituationen mit mehr als 4,6 kW zu laden quasi nicht gegeben. Auch wenn vielfach suggeriert wird, dass man ständig und unbedingt mit der maximalen Leistung die Fahrzeugbatterie auf 100% laden müsste ist eher das genaue Gegenteil der Fall. Die Standzeiten sind so lang dass selbst mit minimaler Ladeleistung das Fahrzeug quasi immer voll ist aber man hier noch eine weitere Optimierungen durchführen möchte: Die Reduktion des Netzbezugs, die Erhöhung des Eigenverbrauchs und die Maximierung der PV-Produktion ohne Abregelung. |
Beta Was this translation helpful? Give feedback.
-
Siehe #1213. Initial werden Easee und OpenWB unterstützt. Die neue Go-e hat kein dokumentiertes API und arbeitet auch organisatorisch nicht mit uns zusammen :( |
Beta Was this translation helpful? Give feedback.
-
was ist OLC? Einen mA-genauen Ladedontroller zu nehmen haben wir jdfls bei Open/Smart/WB angeregt nachdem meine Wallbe das vorher schon konnte ;) |
Beta Was this translation helpful? Give feedback.
-
@schwarmik Hast du einen von diesen DC-Solarwatt-Speichern die den PV-Wechselricher "missbrauchen"? |
Beta Was this translation helpful? Give feedback.
-
Bitte seid nett zueinander und zurück zum Thema, sonst schließe ich die Diskussion. |
Beta Was this translation helpful? Give feedback.
-
Ich habe mir mal den Code zu #1213 angeschaut. Leider habe ich die Wechselwirkungen zwischen den ganzen Subprogramme nicht wirklich verstanden. |
Beta Was this translation helpful? Give feedback.
-
Ich bin jetzt an einem Punkt wo ich nicht genau weiß wie ich weitermachen soll. Auf der einen Seite regelt Solarwatt und auf der anderen will EVCC die Wallbox antriggern. Beides zusammen wird so nicht funktionieren. Ich hab es getestet - die Solarwatt Regelung füllt eisern den Speicher oder feuert immer wieder den Heizstab, da kommt EVCC im Modus "PV-Laden" kaum oder gar nicht zum Zug. Eigentlich auch logisch das es sich so verhält. Die Solarwatt Anlage ist nun mal da und ich will schauen was ich für Möglichkeiten habe. EVCC fest zu integrieren wäre klasse, genauso will ich meine EV-Betankung letztendlich im Griff haben. Mit Ausnahme von irgendeiner Diagramm-Historie ist alles da. Ich bin ja noch nicht so im Thema aber wie machen das alle anderen die einen Speicher haben (und ggf. einen Heizstab) - auch da werkelt ja schon etwas im Hintergrund und regelt das Ganze. Den Heizstab an EVCC zu binden kann ich mir als Verbraucher ja gut vorstellen, aber die Speicher Regelung ist doch ein ganz anderes Thema oder ? (Beispiel: Solarwatt füllt diesen mit Berücksichtigung der Bewölkung bzw. Sonnenstunden am Standort usw.) Oder denke ich zu kompliziert ? Und die Frage ist auch ob ich das beschriebene in einem extra Thread aufmachen soll - es passt ja schon länger nicht mehr zum ursprünglichen Thema. thx..! |
Beta Was this translation helpful? Give feedback.
-
Wir haben hier über 100 Beiträge, viele davon sind nicht mehr an der originalen Frage orientiert. Daher schließe ich die Diskussion und bitte euch bei offenen Fragen neue spezifische Beiträge zu eröffnen. Danke. |
Beta Was this translation helpful? Give feedback.
-
Hallo zusammen,
ich habe ein paar Fragen und wahrscheinlich auch noch ein paar Wissenslücken zu stopfen.
Ich habe eine PV Anlage (knapp 10kWp) von Solarwatt samt Speicher und Steuerung ("EnergyManager") - der Wechserichter ist ein Fronius. Dazu hängt in der Garage eine Wallbox von Keba. Weil die Keba standardmässig von Solarwatt und deren Regelung unterstützt wird ... habe ich das auch bis dato nicht groß hinterfragt.
Kurzum: Ich möchte in der Regel nur Überschuss laden und stecke jetzt im Thema drin mit der automatischen Phasenumschaltung. Entweder ich betreibe die Keba auf einer Phase und kann ab 1,4kW Überschuss laden oder eben erst ab 4,2kW bei drei-phasigem Betrieb ... was bei der Größe meiner PV-Anlage und einem leicht bewölkten Wetter keine Option ist, weil dann die Schaltschwelle (4,2kW) kaum oder nie erreicht wird.
Die OpenWB kann die Phasenumschaltung - allerdings (und auch nachvollziehbar) nur in der "Ich kaufe eine OpenWB Wallbox" Option.
Go-e hat diese in der neuen Version bereits eingebaut und wird die Phasenumschaltung später auch via API verfügbar machen (bisher gehts nur über die App). Ich habe go-e kontaktiert, Antwort:
Die Phasenumschaltung (ab Hardware-Version 3) ist im Moment nur per App verfügbar. Im Moment können wir leider noch keine Angaben zur API machen, da diese von uns noch nicht offiziell dokumentiert wurde.
Wir werden die API-Dokumentation aber in naher Zukunft als Download anbieten.
wenn es die API später unterstützt => wird dies in der Software eingebaut bzw. unterstützt ? Dann würde ich meine Keba wieder veräußern und mir eben eine go-e Wallbox kaufen. Dann übernimmt die Überschussregelung eben Eure Software und nicht mehr Solarwatt.
hätte ich noch weitere Möglichkeiten als die beiden mir bekannten (OpenWB und go-e) ? Wallbe ?
Wie gesagt bin ich gerade dabei mich mit der Thematik zu beschäftigen und freu mich über jeden Tipp.
Grüße
Beta Was this translation helpful? Give feedback.
All reactions