SunGrow SH 5.0 RT #12049
Replies: 3 comments 6 replies
-
Der Hausverbrauch spielt keine Rolle. Wichtig ist der Wert am Netzanschluss. |
Beta Was this translation helpful? Give feedback.
-
Hallo, ich nutze evcc mit einem SH8.0RT. Die Überschussladung funktioniert problemlos. Den WINet-S Dongle vom Wechselrichter brauchst du für die iSolarcloud und den direkten Webzugriff. Der direkte LAN-Anschluss an dem Wechselrichter ist ausschließlich für Modbus-Kommunikation. Den Modbus brauchst du für evcc. Den WiNet-S kannst du für EVCC gar nicht gebrauchen. Ich habe trotzdem beide per LAN an meinen Router angeschlossen, da ich auch die iSolarCloud und das lokale Web-Interface nutze. Achte darauf, dass du bei der Config im EVCC die IP von dem Modbus-Port des WR verwendest und nicht die des WiNet-S Dongle.
|
Beta Was this translation helpful? Give feedback.
-
Ich nutze einen sh10rt mit der Sungrow Wallbox. Evcc funktioniert grundsätzlich aber die Werte und Lademodi aus der isolarcloud übersteuern die Einstellungen im evcc. Beispiel: ich habe in der isolarcloud Überschussladen an. Gehe ich jetzt auf evcc und wähle schnelladen, dann wird mir mit 4,2 kW geladen. Stelle ich Schnellladen in der isolarcloud ein geht das schnelladen in evcc auch mit 11Kw. Kann mir jemand helfen?! |
Beta Was this translation helpful? Give feedback.
-
Hi,
ich würde mich gerne in dieses Projekt vertiefen, da ich seit kurzem ein Elektroauto besitze.
Sehe ich es in der Doku richtig, dass bei einem SunGrow SH 5.0 RT der Verbrauch des Hauses nicht abgerufen werden kann, sondern nur der Netzbezug, der Ertrag der PV und der Stand der Batterie?
Ich kann es noch nicht selbst testen da ich ihn noch per Dongle angeschlossen habe und darauf warte dass die Firma mir sagt, ob ich problemlos auf den nativen LAN-Anschluss wechseln kann...
Hoffe jemand hat ebenfalls einen SunGrow SH und kann mir berichten.
Gruß
Beta Was this translation helpful? Give feedback.
All reactions