Target "${platform}-build" does not exist in the project "Energia" when building on Raspberry Pi 4

[YePererva]

Hello!

I'm trying to build the Energia on Raspberry Pi 4 (version with 4Gb of RAM with the latest Rasbpian installed and all updates after sudo apt-get update && sudo apt-get full-upgrade -y).
I found this old post on how to do that, but have no success when following it, even though it, basically, follows instructions on building Arduino IDE as specified in howto.txt file from repository.

Used board

Launchpad with MSP430G2231 (marking on LaunchPad: MSP-EXP430G2)

Steps to reproduce the problem:

# installing prerequisites
sudo apt-get install -y default-jdk ant texinfo libgmp-dev libmpfr-dev libmpc-dev
# building form GitHub repository
mkdir ~/"Electronics IDE"
cd ~/"Electronics IDE"
git clone --recursive https://github.com/energia/Energia.git
cd ./Energia/build
ant

Result of actions:

Buildfile: /home/pi/Electronics IDE/Energia/build/build.xml

build:

BUILD FAILED
/home/pi/Electronics IDE/Energia/build/build.xml:82: The following error occurred while executing this line:
Target "${platform}-build" does not exist in the project "Energia".

Total time: 1 second

For a while I suspected that it didn't like the space in path, but using the folder without space in the path didn't change anything.

Expected behaviour:

According to this : having no errors and being able to run ant run after build to use Energia

Is it fixable?

P.S. I also found this post suggesting some libraries, which should be installed, but installing:

sudo apt-get install -y libusb-dev binutils-msp430 gcc-msp430 msp430mcu mspdebug msp430-libc gdb-msp430

didn't help to solve the issue. The error is still the same.

P.P.S. The LaunchPad seems to be seen by RPi, according to this post since after connecting them with USB cable and running sudo mspdebug rf2500 I recieved the following reply:

MSPDebug version 0.22 - debugging tool for MSP430 MCUs
Copyright (C) 2009-2013 Daniel Beer <[email protected]>
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Trying to open interface 1 on 006
Initializing FET...
FET protocol version is 30001000
Set Vcc: 3000 mV
Configured for Spy-Bi-Wire
Device ID: 0xf201
	Code start address: 0xf800
	Code size         : 2048 byte = 2 kb
	RAM  start address: 0x200
	RAM  end   address: 0x27f
	RAM  size         : 128 byte = 0 kb
Device: MSP430F2012/G2231
...
Type "help <topic>" for more information.
Use the "opt" command ("help opt") to set options.
Press Ctrl+D to quit.
(mspdebug) 

[rei-vilo]

Have you tried the revised procedure from https://github.com/robertinant/EnergiaNG#building-energia?

[YePererva]

Have you tried the revised procedure from https://github.com/robertinant/EnergiaNG#building-energia?

Yes. And it results in this error:

BUILD FAILED
/home/pi/Electronics IDE/EnergiaNG/build/build-energia.xml:136: The following error occurred while executing this line:
/home/pi/Electronics IDE/EnergiaNG/build/build-energia.xml:641: The following error occurred while executing this line:
/home/pi/Electronics IDE/EnergiaNG/build/build-energia.xml:214: The following error occurred while executing this line:
/home/pi/Electronics IDE/EnergiaNG/build/build-energia.xml:223: The following error occurred while executing this line:
/home/pi/Electronics IDE/EnergiaNG/build/build-energia.xml:837: Could not find file /home/pi/Electronics IDE/EnergiaNG/build/shared/reference.zip to generate checksum for.

Also posted details in the appropriate thread

[MrityunjaiKumar]

I am facing the same error, and i suspect no download form url http://energia.nu/ is working.
In the current log, build is trying to download http://energia.nu/files//reference.zip but not working.

Even https://energia.nu/download/ for pre build Energia is not working.