You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Nov 11, 2022. It is now read-only.
I have a few RC8325-V2 that came with the house we just bought. They seem to be ADT cameras. I ended up having to crack one open and connect to the UART port to poke at getting it connected to our WiFi. These cameras are meant to be WPS only cameras, with a usb port to supposedly plug in a USB network dongle. I was never able to find a dongle that worked. After getting UART access and finding this github among other blogs stating the default login, I was able to access the console and dig around. I found that they have a pre-configured WPA SSID+PSK. So, if you do not have a WPS router then you can just add this SSID to your router and then factory reset them, they will then automatically connect to your WiFi. Allowing you to access them to configure to your own SSID.
I have a few RC8325-V2 that came with the house we just bought. They seem to be ADT cameras. I ended up having to crack one open and connect to the UART port to poke at getting it connected to our WiFi. These cameras are meant to be WPS only cameras, with a usb port to supposedly plug in a USB network dongle. I was never able to find a dongle that worked. After getting UART access and finding this github among other blogs stating the default login, I was able to access the console and dig around. I found that they have a pre-configured WPA SSID+PSK. So, if you do not have a WPS router then you can just add this SSID to your router and then factory reset them, they will then automatically connect to your WiFi. Allowing you to access them to configure to your own SSID.
SSID:
icontrolinstall
PSK:
kl'#E(ILmxvlkjxleri#Rsferf|qd~#@#QWRA(
We also have a few OC810's, I will be testing if those will connect using the same default SSID and report back.
The text was updated successfully, but these errors were encountered: