This repository has been archived by the owner on Sep 2, 2021. It is now read-only.

Visual Assembly: Edge Lab Bring Up - RPi Version

Return to Edge Lab Overview or Bill of Materials.

For prerequisites, please see (Assembly)[assembly.md].

This uses the USBC power and Cloudlet case as a reference.

NOTE: DO NOT POWER THE SYSTEMS UNTIL INSTRUCTED!

Assemble the mechanical environment, if needed

Identify all the RPi numbers 0 to 3 and mark them for future reference. Then wire the USB power lines to all the servers.

(picture shown uses MAC addresses)

Insert the SD Cards into the systems,

Mount the systems in the case (if using case)

Power is attached to pins: Red=4, Black=6

Attach the mini-HDMI adapter to the server (RPi #0) card using HDMI port and the USB Keyboard to the server (RPi #0) card using any of the four USB ports.

Wire the Network cables to the Network Switch

Time to Power On!

See Bootstrapping for next steps!