diff --git a/Installation/DENTInstallation.md b/Installation/DENTInstallation.md
new file mode 100644
index 0000000..d563535
--- /dev/null
+++ b/Installation/DENTInstallation.md
@@ -0,0 +1,102 @@
+---
+title: DENT Installation
+parent: Installation
+nav_order: 1
+layout: default
+---
+
+# DENT Installation
+
+## Overview
+
+This section will describe the process of installing DENT on a device.
+
+The DENT NOS build system uses an ONIE-compatible installer.
+This section will describe installing the dentOS using a USB drive and connecting
+to the device using a serial console.
+
+Other alternative methods for installing with an ONIE
+system can also be found here.
+
+Steps:
+
+1. Download or manually compile the installer image and place it on the USB drive
+   under the name `onie-installer`
+   (we assume that the working directory is the top directory in the local copy of the repository):
+
+```
+~ $ sudo mount /dev/sda /mnt/usb
+~ $ sudo cp RELEASE/stretch/arm64/DENTOS-main_ONL-OS9_2021-10-26.1332-240e9a7_ARM64_INSTALLED_INSTALLER /mnt/usb/onie-installer
+~ $ sudo umount /mnt/usb
+```
+
+Enter the ONIE environment Power on the device and upon seeing the prompt,
+press `123<ENTER>` to stop autoboot and enter
+the U-Boot environment. The output should be as follows:
+
+```
+U-Boot 2018.03-devel-1.2.0 (Jul 17 2020 - 13:58:51 +0800) TN48M/TN48M-P/TN4810M/TN48M2 V05
+
+Model: Marvell Armada 7040 TN48M/TN48M-P/TN4810M/TN48M2
+SoC: Armada7040-B0; AP806-B0; CP115-A0
+Clock:  CPU     1400 [MHz]
+	DDR     800  [MHz]
+	FABRIC  800  [MHz]
+	MSS     200  [MHz]
+LLC Enabled (Exclusive Mode)
+DRAM:  8 GiB
+Comphy chip #0:
+Comphy-0: PEX0          5 Gbps
+Comphy-1: SATA0         6 Gbps
+Comphy-2: SGMII0        3.125 Gbps
+Comphy-3: SGMII1        1.25 Gbps
+Comphy-4: UNCONNECTED
+Comphy-5: SGMII2        1.25 Gbps
+UTMI PHY 0 initialized to USB Host0
+PCIE-0: Link up (Gen2-x1, Bus0)
+NAND:  0 MiB
+MMC:
+Loading Environment from SPI Flash... Bus spi@700600 CS0 address is not set correctly.
+SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
+OK
+EEPROM: TlvInfo v1 len=127
+Model: Marvell Armada 7040 TN48M/TN48M-P/TN4810M/TN48M2
+Net:   eth0: mvpp2-0, eth1: mvpp2-1, eth2: mvpp2-2 [PRIME]
+SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
+Type 123<ENTER> to STOP autoboot
+```
+
+If the device is currently running a non-ONIE OS operating system, first trigger
+the ONIE environment from U-boot. U-Boot has a set of pre-defined environment variables,
+of which the most important one is `bootcmd`.
+
+To trigger ONIE from U-Boot use the `onie_boot_reason` environment variable to
+`install` and run bootcmd afterward.
+
+```
+Marvell>> setenv onie_boot_reason install
+Marvell>> run bootcmd
+Loading Open Network Install Environment ...
+Platform: arm64-delta_tn48m-r0
+Version: 2019.08
+SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
+device 0 offset 0x400000, size 0xc00000
+```
+
+The system will now boot into ONIE with Installer Mode Enabled. Expected console output is as follows:
+
+```
+** Installer Mode Enabled **
+ONIE:/ #
+ONIE:/ # down.
+```
+
+3. Plug the USB into the device USB port and mount it
+
+`ONIE:/ # mount /dev/sdb1 /mnt/usb/`
+
+The system should automatically locate the `onie-installer` file on the drive and execute it. After the installer
+is executed, the device should boot into the dentOS environment. The default password for the `root` user is `onl`.
+
+In case there is no pre-installed operating system on the device, powering up the switch will automatically boot
+into the ONIE install environment. ONIE will scan the USB drive for the installer file and install the DentOS from it.
diff --git a/Installation/LocalMachine.md b/Installation/LocalMachine.md
index 2bf5d19..2cf94af 100644
--- a/Installation/LocalMachine.md
+++ b/Installation/LocalMachine.md
@@ -1,7 +1,7 @@
 ---
-title: Using your local machine
+title: GNS3 on a local machine
 parent: Installation
-nav_order: 1
+nav_order: 2
 layout: default
 ---
 
diff --git a/Installation/Server.md b/Installation/Server.md
index a4b11df..644f7ec 100644
--- a/Installation/Server.md
+++ b/Installation/Server.md
@@ -1,7 +1,7 @@
 ---
-title: Using a remote server
+title: GNS3 on a remote server
 parent: Installation
-nav_order: 3
+nav_order: 4
 layout: default
 ---
 
diff --git a/Installation/VirtualMachine.md b/Installation/VirtualMachine.md
index 6c55c88..22fc162 100644
--- a/Installation/VirtualMachine.md
+++ b/Installation/VirtualMachine.md
@@ -1,7 +1,7 @@
 ---
-title: Using a virtual machine
+title: GNS3 on a virtual machine
 parent: Installation
-nav_order: 2
+nav_order: 3
 layout: default
 ---