- More tests before installing prebuilt RTKLib cli tools.
- Build rtklib if previous installed release is not working. #418
- Insert new release into settings.conf before restarting services. #411
- Custom web_port setting was not used. #419
- Cellular modem: nmcli connection was not updated after a switch to public ip address.
- Septentrio Mosaic-X5 detection and configuration
- Reverse proxy server with Rtkbase authentication, for Mosaic-X5 web interface
- Added description below form input. #381
- New optional service, rtkbase_raw2nmea.service, to get date and time with a gnss receiver unknown to gpsd. (CLI only) #394
- RTKLib upgraded to release b34j from rtklibexplorer.
- Switch server from eventlet to gevent + Gunicorn server.
- Operating systems older than Debian 11 / Ubuntu 22.04 can't update RTKBase anymore.
- Python release < 3.8 deprecated
- Eventlet python module is not needed anymore.
- Remove Sbas rtcm message (1107) after F9P configuration. #391
- Tooltips buttons were a link to top page. #387
- Fix armbian ramlog bug with log older than 1 day. Stefal/build#16
- Archive service will compress .sbf files too.
- Fix duplicates in .sbf to rinex conversion : rtklibexplorer/RTKLIB#186
- Various fixes : #374
- Update various python modules.
- udev rules to create ttyGNSS port for usb connected F9P.
- Added UART connected F9P detection and configuration.
- Some scripts for using a base with a 4G Simcom A76XX modem. (Beta).
- Rules to manage rtkbase services without sudo (Bookworm or newer).
- Trying to detect the wrong cpu temp on Orange Pi Zero. #224
- Buttons and collapsing informations on the diagnostic page.
- RTKLib upgraded to release b34i from rtklibexplorer.
- RTKBase now use a virtual environnement for the python environnement
- install.sh -> --detect-usb-gnss renamed to --detect-gnss
- Rinex conversion -> limit to 2 frequencies removed in "full" presets
- Rinex conversion -> receiver option (-TADJ=1 for ubx) is sourced from settings.conf
- Logs -> default time overlap changed from 30s to 0s
- More tests before copying RTKLib binaries. #313
- Skip unknown section or key when restoring settings. #336
- Fix space detection in various forms inputs.
- Fix broken form input validation patterns. #353
- Fix some issues with Orange Pi Zero images. #361
- Update of various python modules.
- Apply some restrictions on RTKBase services. #341
- Pin Werkzeug module to v2.2.2 to fix dependencie failure. #330
- GUI -> Settings: Fixed GNSS detect & configure. #303
- GUI -> Settings: Added a 2nd NTRIP output. #240
- GUI -> Settings: Added features to backup, restore and reset RTKBase settings.
- GUI -> Settings: Added a button to detect and/or configure the gnss receiver. #70
- GUI -> Settings: Added a button to show/hide the Ntrip passwords. Thanks to @GwnDaan #208
- GUI -> Settings: Added Gnss receiver informations (Model and firmware release).
- GUI -> Settings: Added Operating system informations.
- GUI -> Settings: Alert when user wants to leave the page with unsaved settings. #235
- GUI -> Status: Added tooltip on the blue pin to explain that it's a coarse location. #247
- GUI -> Status: Added an alert if the main service isn't active.
- GUI -> Logs: Added 3 more Rinex presets, and modified rinex window layout. #43 #134 #190 #200
- Bidirectionnal communication with the gnss receiver is enabled. #277
- More informations are available in the local caster source table. #183
- Port number for the web server is configurable in settings.conf
- RTKLib upgraded to release b34g from rtklibexplorer. #222
- RTKLib binaries are bundled for armv6l, armv7l, aarch64, x86. Compilation from source isn't needed anymore for these platforms.
- Command line: Many changes on install.sh arguments/options. See
install.sh --help - Flask upgraded to v2.2.2 and other dependencies upgraded too.
- SocketIO upgraded to v4.4.1
- Bootstrap upgraded to v4.6.1
- Bootstrap-table upgraded to v1.21.1
- Password for local caster isn't mandatory anymore. Thanks to @GwnDaan #210
- Change socketio connection method. Thanks to @jaapvandenhandel
- Change 127.0.0.1 to localhost for better ipv6 support. Thanks to @by
- GUI -> Status: Sat. levels and coordinates are set to zero in case of a signal interruption. #164
- GUI -> Status: Sat. levels are left align. Thanks to @GwnDaan #72
- GUI -> Status: New provider for OpenStreetMap HOT tiles.
- GUI: After a RTKBase update, the browser won't use the old javascript files anymore (cache busting). #217
- Remaining space check could not work with non english shell. Thanks to @GwnDaan #213
- GUI -> Settings: No more "bounce" issues with the switches. Thanks to @GwnDaan
- Max Cpu temp was not updated when no user were connected. Thanks to @GwnDaan
- GUI -> Settings: Check update now display an error in case of a connection error. Thanks to @GwnDaan #221
- GUI -> Logs: Better logs table behaviour on mobile devices.
- Grep pattern fixed on PPS example. Thanks to @by.
- Failure with some python dependancies. #215
- More fixes with Gpsd service restart. #94
- Fix the Rinex conversion failure. #206
- Restart Ntrip/Rtcm services after an update. #171
- When the Main service restart, Gpsd service restart too #94
- GUI -> Status: Added a new default map background : Osm "standard", from osm.org.
- GUI: The footer include a link to the github repo. #191
- GUI -> Settings : Board name is displayed in the System Settings section. #194
- Leafletjs upgraded to release 1.7
- GUI -> Status: Ortho HR (aerial images) max zoom changed from 20 to 21.
- GUI -> Settings: "Save" buttons are disabled when a new setting is saved. #193
- Rtcm and Ntrip services are restarded after a RTKBase update. #171
- The Rinex conversion is more robust and error message is more understandable.
- GUI -> Rinex conversion is now enabled only for zip files.
- Local ntrip caster was not started with the right user/password syntax. #166
- Local ntrip caster service was not restarted after new settings were set. #167
- Psutil python requirement could not be installed on Os already including it (like Raspberry Pi Os with desktop). #165
- New local Ntrip Caster service to use RTKBase as a standalone NTRIP Caster.
- GUI -> Status: New OrthoHR aerial imagery layer, covering France only.
- GUI -> Status: Realtime and static base position stay both visible on the map.
- GUI -> Status: Solution status is displayed next to coordinates.
- GUI -> Settings: Service status are updated in realtime, and painted with orange/red in case of restart/failure.
- GUI -> Settings: Display Cpu temperature.
- GUI -> Settings: Display uptime.
- GUI -> Settings: Display storage informations.
- GUI -> Settings: Tooltips to display some help about each services.
- GUI : Auto reconnection with the web server after a RTKBase update or a server (SBC) reboot.
- Default antenna value sets to 'ADVNULLANTENNA' instead of 'NULLANTENNA'.
- Rtkbase was deleting old archives when remaining space was lower than 5GB instead of 500MB. And now you can change this value inside
settings.conf. #132 - rtkrcv configuration was hardcoded with ubx input, now it uses the format set on GUI -> Settings -> Main. #148
- Only .ubx files were archived. Now archive_and_clean.sh script check for all files format managed by str2str. #158
- The 2.1.x to 2.2.0 upgrade created a wrong path inside str2str_rtcm_serial.service (/var/tmp/rtkbase)
- rtkrcv didn't always stop after the 1O mn timeout. #35
- Cryptography module updated to 3.3.2
- Eventlet module updated to 0.31.0
- New Rtcm serial service to send a rtcm stream on a serial output, like a radio module
- RTKBase release number, receiver model, and antenna information are sent on RTCM stream (message 1008 and 1033 added)
- GUI->Status: Button to copy realtime coordinates to the clipboard
- GUI->Settings: You can edit the antenna info in the Main service options
- GUI->Settings: Spinners and countdown added on reboot modal window
- GUI->Settings: Auto refresh the webpage after a reboot (fixed time duration)
- The archive_and_clean script delete oldest archives if there is less than 500MB available.
- The install script check if there is enough space before starting
- Upgrade to RTKLib v2.4.3-b34
- Pystemd updated to 0.8.0
- Pystemd is now installed from Pypi
- Some python module updates
- More dependencies are installed for aarch64 platform
- The realtime base location calculation is now using dual-frequency ionosphere correction. You won't see the location anymore if you use a single frequency receiver.
- Default value for archive rotation lowered to 60 days.
- Cleaning update modal box when closing it
- writing absolute path to python3 in rtkbase_web unit file
- Cryptography module updated to 3.3.1
- rtcm services was sending data to the ntrip caster.
- GUI -> Status: Marker on the map with the fixed base's coordinates.
- GUI -> Status: Optional Maptiler aerial image layer on the map (see 'Advanced' section in README.md)
- GUI -> Settings: Receiver dependent options on Rtcm and Ntrip output
- GUI -> Settings: Services diagnostic
- GUI -> Logs: Option to convert a zipped ubx archive to Rinex (for the IGN "Calculs GNSS Réseau en ligne")
- Miscellaneous: You can run install.sh from anywhere
- Miscellaneous: Freeze python modules inside requirements
- Gnss receiver (ZED-F9P): Disabling SBAS during configuration
- Gnss receiver (U-Blox): During the first installation, if a U-Blox receiver is detected, -TADJ=1 will be added for Rtcm and Ntrip outputs. See #80
- Gnss receiver: The config files extension is now .cfg
- install.sh: Check if logname return a correct value
- install.sh: Add dialout group to user
- various bugfixes
- Web interface
- Satellite levels
- Map
- Setting configuration from the webpage
- Download/Delete raw data
- Automatic installation
- Automatic setup for usb connected Ublox Zed-F9P
- Multiple simultaneous streams (Raw/Rtcm/Ntrip)
- First official Release
- First beta release