| layout | title |
|---|---|
documentation |
ZW3102 - ZWave |
{% include base.html %}
This describes the Z-Wave device ZW3102, manufactured by Jasco Products with the thing type UID of ge_zw3102_00_000.
The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.
The ZW3102 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the ZW3102 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Dimmer | switch_dimmer | DimmableLight | Dimmer |
| Electric meter (power factor) | meter_powerfactor | Energy | Number |
| Electric meter (watts) | meter_watts | Energy | Number |
| Electric meter (amps) | meter_current | Energy | Number |
| Electric meter (kWh) | meter_kwh | Energy | Number |
| Electric meter (volts) | meter_voltage | Energy | Number |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.
Indicates the instantaneous power factor.
The meter_powerfactor channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Indicates the instantaneous power consumption.
The meter_watts channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Indicates the instantaneous current consumption.
The meter_current channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Indicates the energy consumption (kWh).
The meter_kwh channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Indicates the instantaneous voltage.
The meter_voltage channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
The following table provides a summary of the 7 configuration parameters available in the ZW3102. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 5 | Ignore start level | Ignore start level when receiving zwave dim commands |
| 7 | Zwave Dim Steps | Number of dim steps when receving a zwave dim command |
| 8 | Zwave Step Timing | Timing of dim steps when receving a zwave dim command |
| 9 | Rocker Dim Steps | Number of dim steps when pressing the rocker |
| 10 | Rocker Step Timing | Timing of dim steps when pressing the rocker |
| 11 | Zwave Dim Steps - All Command | Number of dim steps when receving a zwave All-On or All-off command |
| 12 | Zwave Step Timing - All Command | Timing of dim steps when receving a zwave All-On or All-Off command |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
Ignore start level when receiving zwave dim commands Every "Dim" command from your remote controller includes a start level embedded in it. This device can be set to ignore the start level that is part of the dim command The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Obey commend start level |
| 1 | Ignore commend start level |
The manufacturer defined default value is 1 (Ignore commend start level).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Number of dim steps when receving a zwave dim command
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_7_1 and is of type INTEGER.
Timing of dim steps when receving a zwave dim command
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_8_1 and is of type INTEGER.
Number of dim steps when pressing the rocker
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_9_1 and is of type INTEGER.
Timing of dim steps when pressing the rocker
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_10_1 and is of type INTEGER.
Number of dim steps when receving a zwave All-On or All-off command
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_11_1 and is of type INTEGER.
Timing of dim steps when receving a zwave All-On or All-Off command
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_12_1 and is of type INTEGER.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_METER_V3 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_PROTECTION_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.