No picture from rear camera on RLink(( Please help the experts) #1140
Replies: 34 comments 11 replies
-
have you wired up the composite video in? : |
Beta Was this translation helpful? Give feedback.
-
Did you reboot the rlink after making your changes? |
Beta Was this translation helpful? Give feedback.
-
I did everything as written. I connected the camera RCA connection to 18 (yellow) and 21 (black), only not in the RLink but under the driver's seat. Configured for DDT4all, rebooted R Link, and nothing((( |
Beta Was this translation helpful? Give feedback.
-
The camera is working, the backlight turns on when I turn on the reverse gear. Do I need any additional settings, for example: parking sensors, maybe I need to change the screen resolution somehow? |
Beta Was this translation helpful? Give feedback.
-
I wonder if the the wires under the seat are connected up to the back of the radio - in any case i thought the wire for the reverse camera were up in the footwell area , not under the seat? there is also a CVBS (video in) ground as well on pin 19 |
Beta Was this translation helpful? Give feedback.
-
Yes. 19 and 21, they are the same turns out (grounding). |
Beta Was this translation helpful? Give feedback.
-
if that were me i would pull off the trim , take out the rlink screen and put the wires straight to the back of the multi connector and see what happens. - its a good sign the screen goes black but backlit when you put car in reverse . |
Beta Was this translation helpful? Give feedback.
-
I also connected the R Link to the screen. Nothing. When the reverse speed is turned on, a black screen with guide lines appears, but there is no picture. |
Beta Was this translation helpful? Give feedback.
-
and you are absolutely sure the camera is working - if the camera is 12v , try putting the positive up to a constant positive feed and not on the reverse light bulb socket |
Beta Was this translation helpful? Give feedback.
-
Thank you! I'll try for the sake of experiment, maybe something will change. But as the camera has LEDs, they will be constantly lit as soon as the car will turn on. |
Beta Was this translation helpful? Give feedback.
-
are they infra red LED's though - the ones that help the camera see in the dark? - if they are you cannot see them lit up just with eye, but if you point your phone camera at them you will see them lit up |
Beta Was this translation helpful? Give feedback.
-
so , when you have it wired up to the reverse bulbs when you put the car into reverse the LED lights are lit? - or do they only light up when its dark outside? |
Beta Was this translation helpful? Give feedback.
-
No, I have a camera with LED's lighting, not infrared. Does it matter if the camera is with an ССD matrix or without an ССD? |
Beta Was this translation helpful? Give feedback.
-
and a screenshot of yours for this: |
Beta Was this translation helpful? Give feedback.
-
Yes, of course) |
Beta Was this translation helpful? Give feedback.
-
thanks for that , looks all ok - have you got reverse parking sensors on your car? Also where it says trunk handler message set that to not fitted and the trunk open handler disable rvc set that to not fitted |
Beta Was this translation helpful? Give feedback.
-
Yes, I have rear parking sensor). |
Beta Was this translation helpful? Give feedback.
-
can there be a decoder in the car that does not allow the image to be displayed on the screen? 3 cameras tried to connect. Nothing( |
Beta Was this translation helpful? Give feedback.
-
This camera does not work on R-Link. |
Beta Was this translation helpful? Give feedback.
-
why not? - are you giving it a proper 12v power supply and not the 6v supply from the rlink? |
Beta Was this translation helpful? Give feedback.
-
good post need a ref .. but clean in ... please refer it at discutions |
Beta Was this translation helpful? Give feedback.
-
I have the same problem with Rlink 1, no image from rear cam. Did anyone fixed it? Can you tel me how? |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
if any help to anyone here is wiring diagram to the back of the MFD (multi function touchscreen display) |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Very interesting topic. R-3MY example (which isn't right for instance, because there's no 12v power in the 'factory unit'): another one: |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Hello,
Who faced the situation. I connected the rear-view camera to the RLINK (yellow and black wires) Megane 3, activated it via ddt4all, the camera is connected to the rear lights. The camera turns on, but there is no picture on the screen. I've heard what additional configurations need to be installed. It's possible?
Beta Was this translation helpful? Give feedback.
All reactions