[Bug]: ControlNet is gone in stable release, in nightly it's still there. #498
Comments
|
+1 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
{{ message }}
What happened?
After starting the realistic_vision_v20_webui_colab.ipynb, I can open the UI but the ControlNet is not shown
Colab cell output
Collecting httpx==0.24.1 Downloading httpx-0.24.1-py3-none-any.whl (75 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.4/75.4 kB 2.3 MB/s eta 0:00:00 Requirement already satisfied: certifi in /usr/local/lib/python3.10/dist-packages (from httpx==0.24.1) (2024.2.2) Collecting httpcore<0.18.0,>=0.15.0 (from httpx==0.24.1) Downloading httpcore-0.17.3-py3-none-any.whl (74 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 74.5/74.5 kB 9.3 MB/s eta 0:00:00 Requirement already satisfied: idna in /usr/local/lib/python3.10/dist-packages (from httpx==0.24.1) (3.6) Requirement already satisfied: sniffio in /usr/local/lib/python3.10/dist-packages (from httpx==0.24.1) (1.3.1) Collecting h11<0.15,>=0.13 (from httpcore<0.18.0,>=0.15.0->httpx==0.24.1) Downloading h11-0.14.0-py3-none-any.whl (58 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 58.3/58.3 kB 9.7 MB/s eta 0:00:00 Requirement already satisfied: anyio<5.0,>=3.0 in /usr/local/lib/python3.10/dist-packages (from httpcore<0.18.0,>=0.15.0->httpx==0.24.1) (3.7.1) Requirement already satisfied: exceptiongroup in /usr/local/lib/python3.10/dist-packages (from anyio<5.0,>=3.0->httpcore<0.18.0,>=0.15.0->httpx==0.24.1) (1.2.0) Installing collected packages: h11, httpcore, httpx Successfully installed h11-0.14.0 httpcore-0.17.3 httpx-0.24.1 /content env: TF_CPP_MIN_LOG_LEVEL=1 39 packages can be upgraded. Run 'apt list --upgradable' to see them. --2024-03-06 15:35:43-- https://github.com/camenduru/gperftools/releases/download/v1.0/libtcmalloc_minimal.so.4 Resolving github.com (github.com)... 20.27.177.113 Connecting to github.com (github.com)|20.27.177.113|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/669786276/620e2e64-be9f-4599-904f-18ee3811e159?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAVCODYLSA53PQK4ZA%2F20240306%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240306T153544Z&X-Amz-Expires=300&X-Amz-Signature=51ad37c087d933abf40429330daf5fe2d8ff002b3f78c345b88df0703a954a49&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=669786276&response-content-disposition=attachment%3B%20filename%3Dlibtcmalloc_minimal.so.4&response-content-type=application%2Foctet-stream [following] --2024-03-06 15:35:44-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/669786276/620e2e64-be9f-4599-904f-18ee3811e159?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAVCODYLSA53PQK4ZA%2F20240306%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240306T153544Z&X-Amz-Expires=300&X-Amz-Signature=51ad37c087d933abf40429330daf5fe2d8ff002b3f78c345b88df0703a954a49&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=669786276&response-content-disposition=attachment%3B%20filename%3Dlibtcmalloc_minimal.so.4&response-content-type=application%2Foctet-stream Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.110.133, ... Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.109.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 373960 (365K) [application/octet-stream] Saving to: ‘/content/libtcmalloc_minimal.so.4’ /content/libtcmallo 100%[===================>] 365.20K --.-KB/s in 0.1s 2024-03-06 15:35:45 (3.06 MB/s) - ‘/content/libtcmalloc_minimal.so.4’ saved [373960/373960] env: LD_PRELOAD=/content/libtcmalloc_minimal.so.4 pkg-config is already the newest version (0.29.2-1ubuntu3). python3-dev is already the newest version (3.10.6-1~22.04). python3-dev set to manually installed. The following additional packages will be installed: libaria2-0 libblkid-dev libc-ares2 libcairo-script-interpreter2 libffi-dev libglib2.0-dev libglib2.0-dev-bin libice-dev liblzo2-2 libmount-dev libpixman-1-dev libselinux1-dev libsepol-dev libsm-dev libxcb-render0-dev libxcb-shm0-dev Suggested packages: libcairo2-doc libgirepository1.0-dev libglib2.0-doc libgdk-pixbuf2.0-bin | libgdk-pixbuf2.0-dev libxml2-utils libice-doc libsm-doc The following NEW packages will be installed: aria2 libaria2-0 libblkid-dev libc-ares2 libcairo-script-interpreter2 libcairo2-dev libffi-dev libglib2.0-dev libglib2.0-dev-bin libice-dev liblzo2-2 libmount-dev libpixman-1-dev libselinux1-dev libsepol-dev libsm-dev libxcb-render0-dev libxcb-shm0-dev 0 upgraded, 18 newly installed, 0 to remove and 39 not upgraded. Need to get 5,352 kB of archives. After this operation, 25.2 MB of additional disk space will be used. Selecting previously unselected package libc-ares2:amd64. (Reading database ... 121749 files and directories currently installed.) Preparing to unpack .../00-libc-ares2_1.18.1-1ubuntu0.22.04.3_amd64.deb ... Unpacking libc-ares2:amd64 (1.18.1-1ubuntu0.22.04.3) ... Selecting previously unselected package libaria2-0:amd64. Preparing to unpack .../01-libaria2-0_1.36.0-1_amd64.deb ... Unpacking libaria2-0:amd64 (1.36.0-1) ... Selecting previously unselected package aria2. Preparing to unpack .../02-aria2_1.36.0-1_amd64.deb ... Unpacking aria2 (1.36.0-1) ... Selecting previously unselected package liblzo2-2:amd64. Preparing to unpack .../03-liblzo2-2_2.10-2build3_amd64.deb ... Unpacking liblzo2-2:amd64 (2.10-2build3) ... Selecting previously unselected package libcairo-script-interpreter2:amd64. Preparing to unpack .../04-libcairo-script-interpreter2_1.16.0-5ubuntu2_amd64.deb ... Unpacking libcairo-script-interpreter2:amd64 (1.16.0-5ubuntu2) ... Selecting previously unselected package libice-dev:amd64. Preparing to unpack .../05-libice-dev_2%3a1.0.10-1build2_amd64.deb ... Unpacking libice-dev:amd64 (2:1.0.10-1build2) ... Selecting previously unselected package libsm-dev:amd64. Preparing to unpack .../06-libsm-dev_2%3a1.2.3-1build2_amd64.deb ... Unpacking libsm-dev:amd64 (2:1.2.3-1build2) ... Selecting previously unselected package libpixman-1-dev:amd64. Preparing to unpack .../07-libpixman-1-dev_0.40.0-1ubuntu0.22.04.1_amd64.deb ... Unpacking libpixman-1-dev:amd64 (0.40.0-1ubuntu0.22.04.1) ... Selecting previously unselected package libxcb-render0-dev:amd64. Preparing to unpack .../08-libxcb-render0-dev_1.14-3ubuntu3_amd64.deb ... Unpacking libxcb-render0-dev:amd64 (1.14-3ubuntu3) ... Selecting previously unselected package libxcb-shm0-dev:amd64. Preparing to unpack .../09-libxcb-shm0-dev_1.14-3ubuntu3_amd64.deb ... Unpacking libxcb-shm0-dev:amd64 (1.14-3ubuntu3) ... Selecting previously unselected package libffi-dev:amd64. Preparing to unpack .../10-libffi-dev_3.4.2-4_amd64.deb ... Unpacking libffi-dev:amd64 (3.4.2-4) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../11-libglib2.0-dev-bin_2.72.4-0ubuntu2.2_amd64.deb ... Unpacking libglib2.0-dev-bin (2.72.4-0ubuntu2.2) ... Selecting previously unselected package libblkid-dev:amd64. Preparing to unpack .../12-libblkid-dev_2.37.2-4ubuntu3_amd64.deb ... Unpacking libblkid-dev:amd64 (2.37.2-4ubuntu3) ... Selecting previously unselected package libsepol-dev:amd64. Preparing to unpack .../13-libsepol-dev_3.3-1build1_amd64.deb ... Unpacking libsepol-dev:amd64 (3.3-1build1) ... Selecting previously unselected package libselinux1-dev:amd64. Preparing to unpack .../14-libselinux1-dev_3.3-1build2_amd64.deb ... Unpacking libselinux1-dev:amd64 (3.3-1build2) ... Selecting previously unselected package libmount-dev:amd64. Preparing to unpack .../15-libmount-dev_2.37.2-4ubuntu3_amd64.deb ... Unpacking libmount-dev:amd64 (2.37.2-4ubuntu3) ... Selecting previously unselected package libglib2.0-dev:amd64. Preparing to unpack .../16-libglib2.0-dev_2.72.4-0ubuntu2.2_amd64.deb ... Unpacking libglib2.0-dev:amd64 (2.72.4-0ubuntu2.2) ... Selecting previously unselected package libcairo2-dev:amd64. Preparing to unpack .../17-libcairo2-dev_1.16.0-5ubuntu2_amd64.deb ... Unpacking libcairo2-dev:amd64 (1.16.0-5ubuntu2) ... Setting up libglib2.0-dev-bin (2.72.4-0ubuntu2.2) ... Setting up libblkid-dev:amd64 (2.37.2-4ubuntu3) ... Setting up libpixman-1-dev:amd64 (0.40.0-1ubuntu0.22.04.1) ... Setting up libice-dev:amd64 (2:1.0.10-1build2) ... Setting up libsm-dev:amd64 (2:1.2.3-1build2) ... Setting up liblzo2-2:amd64 (2.10-2build3) ... Setting up libc-ares2:amd64 (1.18.1-1ubuntu0.22.04.3) ... Setting up libffi-dev:amd64 (3.4.2-4) ... Setting up libxcb-shm0-dev:amd64 (1.14-3ubuntu3) ... Setting up libsepol-dev:amd64 (3.3-1build1) ... Setting up libxcb-render0-dev:amd64 (1.14-3ubuntu3) ... Setting up libcairo-script-interpreter2:amd64 (1.16.0-5ubuntu2) ... Setting up libaria2-0:amd64 (1.36.0-1) ... Setting up libselinux1-dev:amd64 (3.3-1build2) ... Setting up aria2 (1.36.0-1) ... Setting up libmount-dev:amd64 (2.37.2-4ubuntu3) ... Setting up libglib2.0-dev:amd64 (2.72.4-0ubuntu2.2) ... Processing triggers for libglib2.0-0:amd64 (2.72.4-0ubuntu2.2) ... Processing triggers for libc-bin (2.35-0ubuntu3.4) ... /sbin/ldconfig.real: /usr/local/lib/libtbb.so.12 is not a symbolic link /sbin/ldconfig.real: /usr/local/lib/libtbbbind.so.3 is not a symbolic link /sbin/ldconfig.real: /usr/local/lib/libtbbmalloc.so.2 is not a symbolic link /sbin/ldconfig.real: /usr/local/lib/libtbbbind_2_0.so.3 is not a symbolic link /sbin/ldconfig.real: /usr/local/lib/libtbbmalloc_proxy.so.2 is not a symbolic link /sbin/ldconfig.real: /usr/local/lib/libtbbbind_2_5.so.3 is not a symbolic link Processing triggers for man-db (2.10.2-1) ... Setting up libcairo2-dev:amd64 (1.16.0-5ubuntu2) ... ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 2.3/2.3 GB 69.7 MB/s eta 0:00:01tcmalloc: large alloc 2267324416 bytes == 0x5a91b9b02000 @ ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 2.3/2.3 GB 69.1 MB/s eta 0:00:01tcmalloc: large alloc 2834161664 bytes == 0x5a9240d4c000 @ tcmalloc: large alloc 2267324416 bytes == 0x5a91b9b02000 @ ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 GB 694.3 kB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.1/6.1 MB 37.5 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.4/4.4 MB 27.9 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 17.3 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.6/4.6 MB 33.0 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.3/63.3 MB 8.8 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 153.0/153.0 kB 2.7 MB/s eta 0:00:00 Installing build dependencies ... done Getting requirements to build wheel ... done Installing backend dependencies ... done Preparing metadata (pyproject.toml) ... done Building wheel for lit (pyproject.toml) ... done ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.1/109.1 MB 8.8 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 288.4/288.4 kB 21.8 MB/s eta 0:00:00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 130.2/130.2 kB 17.6 MB/s eta 0:00:00 Cloning into 'stable-diffusion-webui'... remote: Enumerating objects: 28649, done. remote: Total 28649 (delta 0), reused 0 (delta 0), pack-reused 28649 Receiving objects: 100% (28649/28649), 32.79 MiB | 17.30 MiB/s, done. Resolving deltas: 100% (20039/20039), done. Cloning into '/content/stable-diffusion-webui/embeddings/negative'... remote: Enumerating objects: 18, done. remote: Total 18 (delta 0), reused 0 (delta 0), pack-reused 18 Unpacking objects: 100% (18/18), 2.42 KiB | 826.00 KiB/s, done. Cloning into '/content/stable-diffusion-webui/models/Lora/positive'... remote: Enumerating objects: 12, done. remote: Total 12 (delta 0), reused 0 (delta 0), pack-reused 12 Unpacking objects: 100% (12/12), 1.56 KiB | 799.00 KiB/s, done. Filtering content: 100% (3/3), 239.93 MiB | 34.41 MiB/s, done. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= e9665a|OK | 27MiB/s|/content/stable-diffusion-webui/models/ESRGAN/4x-UltraSharp.pth Status Legend: (OK):download completed. --2024-03-06 15:39:45-- https://raw.githubusercontent.com/camenduru/stable-diffusion-webui-scripts/main/run_n_times.py Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.110.133, 185.199.108.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 533 [text/plain] Saving to: ‘/content/stable-diffusion-webui/scripts/run_n_times.py’ /content/stable-dif 100%[===================>] 533 --.-KB/s in 0s 2024-03-06 15:39:45 (12.3 MB/s) - ‘/content/stable-diffusion-webui/scripts/run_n_times.py’ saved [533/533] Cloning into '/content/stable-diffusion-webui/extensions/deforum-for-automatic1111-webui'... remote: Enumerating objects: 15444, done. remote: Counting objects: 100% (3562/3562), done. remote: Compressing objects: 100% (1213/1213), done. remote: Total 15444 (delta 2461), reused 3286 (delta 2331), pack-reused 11882 Receiving objects: 100% (15444/15444), 129.43 MiB | 25.89 MiB/s, done. Resolving deltas: 100% (9651/9651), done. Cloning into '/content/stable-diffusion-webui/extensions/stable-diffusion-webui-images-browser'... remote: Enumerating objects: 172, done. remote: Counting objects: 100% (48/48), done. remote: Compressing objects: 100% (26/26), done. remote: Total 172 (delta 32), reused 22 (delta 22), pack-reused 124 Receiving objects: 100% (172/172), 65.54 KiB | 699.00 KiB/s, done. Resolving deltas: 100% (58/58), done. Cloning into '/content/stable-diffusion-webui/extensions/stable-diffusion-webui-huggingface'... remote: Enumerating objects: 124, done. remote: Counting objects: 100% (18/18), done. remote: Compressing objects: 100% (8/8), done. remote: Total 124 (delta 13), reused 11 (delta 10), pack-reused 106 Receiving objects: 100% (124/124), 29.72 KiB | 661.00 KiB/s, done. Resolving deltas: 100% (43/43), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-civitai-browser'... remote: Enumerating objects: 163, done. remote: Counting objects: 100% (42/42), done. remote: Compressing objects: 100% (16/16), done. remote: Total 163 (delta 35), reused 26 (delta 26), pack-reused 121 Receiving objects: 100% (163/163), 38.83 KiB | 409.00 KiB/s, done. Resolving deltas: 100% (37/37), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-webui-additional-networks'... remote: Enumerating objects: 809, done. remote: Counting objects: 100% (334/334), done. remote: Compressing objects: 100% (102/102), done. remote: Total 809 (delta 263), reused 232 (delta 232), pack-reused 475 Receiving objects: 100% (809/809), 251.57 KiB | 1.63 MiB/s, done. Resolving deltas: 100% (459/459), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-webui-controlnet'... remote: Enumerating objects: 9187, done. remote: Counting objects: 100% (9187/9187), done. remote: Compressing objects: 100% (3735/3735), done. remote: Total 9187 (delta 5488), reused 8897 (delta 5285), pack-reused 0 Receiving objects: 100% (9187/9187), 17.74 MiB | 13.83 MiB/s, done. Resolving deltas: 100% (5488/5488), done. Cloning into '/content/stable-diffusion-webui/extensions/openpose-editor'... remote: Enumerating objects: 414, done. remote: Counting objects: 100% (133/133), done. remote: Compressing objects: 100% (60/60), done. remote: Total 414 (delta 92), reused 104 (delta 73), pack-reused 281 Receiving objects: 100% (414/414), 1.15 MiB | 1.81 MiB/s, done. Resolving deltas: 100% (175/175), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-webui-depth-lib'... remote: Enumerating objects: 98, done. remote: Counting objects: 100% (13/13), done. remote: Compressing objects: 100% (4/4), done. remote: Total 98 (delta 10), reused 9 (delta 9), pack-reused 85 Receiving objects: 100% (98/98), 5.76 MiB | 9.37 MiB/s, done. Resolving deltas: 100% (19/19), done. Cloning into '/content/stable-diffusion-webui/extensions/posex'... remote: Enumerating objects: 407, done. remote: Counting objects: 100% (43/43), done. remote: Compressing objects: 100% (17/17), done. remote: Total 407 (delta 21), reused 40 (delta 21), pack-reused 364 Receiving objects: 100% (407/407), 11.40 MiB | 5.70 MiB/s, done. Resolving deltas: 100% (196/196), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-webui-3d-open-pose-editor'... remote: Enumerating objects: 1601, done. remote: Counting objects: 100% (306/306), done. remote: Compressing objects: 100% (39/39), done. remote: Total 1601 (delta 283), reused 267 (delta 267), pack-reused 1295 Receiving objects: 100% (1601/1601), 7.20 MiB | 14.20 MiB/s, done. Resolving deltas: 100% (1036/1036), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-webui-tunnels'... remote: Enumerating objects: 410, done. remote: Counting objects: 100% (193/193), done. remote: Compressing objects: 100% (45/45), done. remote: Total 410 (delta 184), reused 150 (delta 148), pack-reused 217 Receiving objects: 100% (410/410), 81.31 KiB | 1.59 MiB/s, done. Resolving deltas: 100% (195/195), done. Cloning into '/content/stable-diffusion-webui/extensions/batchlinks-webui'... remote: Enumerating objects: 540, done. remote: Counting objects: 100% (164/164), done. remote: Compressing objects: 100% (82/82), done. remote: Total 540 (delta 111), reused 99 (delta 81), pack-reused 376 Receiving objects: 100% (540/540), 4.48 MiB | 12.61 MiB/s, done. Resolving deltas: 100% (302/302), done. Cloning into '/content/stable-diffusion-webui/extensions/stable-diffusion-webui-catppuccin'... remote: Enumerating objects: 314, done. remote: Counting objects: 100% (26/26), done. remote: Compressing objects: 100% (14/14), done. remote: Total 314 (delta 18), reused 12 (delta 12), pack-reused 288 Receiving objects: 100% (314/314), 13.45 MiB | 18.66 MiB/s, done. Resolving deltas: 100% (171/171), done. Cloning into '/content/stable-diffusion-webui/extensions/stable-diffusion-webui-two-shot'... remote: Enumerating objects: 176, done. remote: Counting objects: 100% (40/40), done. remote: Compressing objects: 100% (19/19), done. remote: Total 176 (delta 23), reused 21 (delta 21), pack-reused 136 Receiving objects: 100% (176/176), 22.22 MiB | 18.00 MiB/s, done. Resolving deltas: 100% (80/80), done. Cloning into '/content/stable-diffusion-webui/extensions/sd-webui-aspect-ratio-helper'... remote: Enumerating objects: 254, done. remote: Counting objects: 100% (101/101), done. remote: Compressing objects: 100% (46/46), done. remote: Total 254 (delta 66), reused 67 (delta 55), pack-reused 153 Receiving objects: 100% (254/254), 407.87 KiB | 2.58 MiB/s, done. Resolving deltas: 100% (121/121), done. Cloning into '/content/stable-diffusion-webui/extensions/asymmetric-tiling-sd-webui'... remote: Enumerating objects: 15, done. remote: Counting objects: 100% (15/15), done. remote: Compressing objects: 100% (13/13), done. remote: Total 15 (delta 3), reused 6 (delta 1), pack-reused 0 Receiving objects: 100% (15/15), 7.79 KiB | 7.79 MiB/s, done. Resolving deltas: 100% (3/3), done. /content/stable-diffusion-webui HEAD is now at f865d3e1 add changelog for 1.4.1 fatal: cannot change to '/content/stable-diffusion-webui/repositories/stable-diffusion-stability-ai': No such file or directory Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= 48393e|OK | 99MiB/s|/content/stable-diffusion-webui/extensions/sd-webui-controlnet/models/control_v11f1p_sd15_depth_fp16.safetensors Status Legend: (OK):download completed. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= 02ad37|OK | 143MiB/s|/content/stable-diffusion-webui/extensions/sd-webui-controlnet/models/control_v11p_sd15_inpaint_fp16.safetensors Status Legend: (OK):download completed. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= a207d5|OK | 237KiB/s|/content/stable-diffusion-webui/extensions/sd-webui-controlnet/models/control_v11f1p_sd15_depth_fp16.yaml Status Legend: (OK):download completed. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= 5ff0a3|OK | 317KiB/s|/content/stable-diffusion-webui/extensions/sd-webui-controlnet/models/control_v11p_sd15_inpaint_fp16.yaml Status Legend: (OK):download completed. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= a47268|OK | 59MiB/s|/content/stable-diffusion-webui/extensions/sd-webui-controlnet/models/t2iadapter_depth_sd15v2.pth Status Legend: (OK):download completed. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= fab541|OK | 60MiB/s|/content/stable-diffusion-webui/extensions/sd-webui-controlnet/models/t2iadapter_zoedepth_sd15v1.pth Status Legend: (OK):download completed. Download Results: gid |stat|avg speed |path/URI ======+====+===========+======================================================= f08dd9|OK | 183MiB/s|/content/stable-diffusion-webui/models/Stable-diffusion/realisticVisionV20_v20.safetensors Status Legend: (OK):download completed. fatal: No names found, cannot describe anything. Python 3.10.12 (main, Nov 20 2023, 15:14:05) [GCC 11.4.0] Version: ## 1.4.1 Commit hash: f865d3e11647dfd6c7b2cdf90dde24680e58acd8 Installing gfpgan Installing clip Installing open_clip Cloning Stable Diffusion into /content/stable-diffusion-webui/repositories/stable-diffusion-stability-ai... Cloning K-diffusion into /content/stable-diffusion-webui/repositories/k-diffusion... Cloning CodeFormer into /content/stable-diffusion-webui/repositories/CodeFormer... Cloning BLIP into /content/stable-diffusion-webui/repositories/BLIP... Installing requirements for CodeFormer Installing requirements Installing pycloudflared Downloading pose_landmark_full.tflite... Downloading pose_web.binarypb... Downloading pose_solution_packed_assets.data... Downloading pose_solution_simd_wasm_bin.wasm... Downloading pose_solution_packed_assets_loader.js... Downloading pose_solution_simd_wasm_bin.js... Installing sd-webui-controlnet requirement: fvcore Installing sd-webui-controlnet requirement: mediapipe Installing sd-webui-controlnet requirement: onnxruntime Installing sd-webui-controlnet requirement: svglib ControlNet init warning: Unable to install insightface automatically. Please try run `pip install insightface` manually. Installing sd-webui-controlnet requirement: handrefinerportable Installing sd-webui-controlnet requirement: depth_anything Installing Deforum requirement: av Installing Deforum requirement: pims Installing requirements for CivitAI Browser Launching Web UI with arguments: --listen --xformers --enable-insecure-extension-access --theme dark --gradio-queue --multiple 2024-03-06 15:44:29.883207: E external/local_xla/xla/stream_executor/cuda/cuda_dnn.cc:9261] Unable to register cuDNN factory: Attempting to register factory for plugin cuDNN when one has already been registered 2024-03-06 15:44:29.883294: E external/local_xla/xla/stream_executor/cuda/cuda_fft.cc:607] Unable to register cuFFT factory: Attempting to register factory for plugin cuFFT when one has already been registered 2024-03-06 15:44:29.885897: E external/local_xla/xla/stream_executor/cuda/cuda_blas.cc:1515] Unable to register cuBLAS factory: Attempting to register factory for plugin cuBLAS when one has already been registered 2024-03-06 15:44:31.544024: W tensorflow/compiler/tf2tensorrt/utils/py_utils.cc:38] TF-TRT Warning: Could not find TensorRT [AddNet] Updating model hashes... 0it [00:00, ?it/s] [AddNet] Updating model hashes... 0it [00:00, ?it/s] *** Error loading script: api.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/api.py", line 15, in <module> from scripts import external_code, global_state File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/external_code.py", line 1, in <module> from internal_controlnet.external_code import * # noqa: F403 File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/internal_controlnet/external_code.py", line 7, in <module> from scripts import global_state File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/global_state.py", line 10, in <module> from scripts.utils import ndarray_lru_cache File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- *** Error loading script: batch_hijack.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/batch_hijack.py", line 6, in <module> from scripts import external_code File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/external_code.py", line 1, in <module> from internal_controlnet.external_code import * # noqa: F403 File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/internal_controlnet/external_code.py", line 7, in <module> from scripts import global_state File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/global_state.py", line 10, in <module> from scripts.utils import ndarray_lru_cache File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- *** Error loading script: controlnet.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/controlnet.py", line 15, in <module> from scripts import global_state, hook, external_code, batch_hijack, controlnet_version, utils File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/global_state.py", line 10, in <module> from scripts.utils import ndarray_lru_cache File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- 2024-03-06 15:44:42,980 - ControlNet - INFO - ControlNet v1.1.441 *** Error loading script: external_code.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/external_code.py", line 1, in <module> from internal_controlnet.external_code import * # noqa: F403 File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/internal_controlnet/external_code.py", line 7, in <module> from scripts import global_state File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/global_state.py", line 10, in <module> from scripts.utils import ndarray_lru_cache File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- *** Error loading script: global_state.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/global_state.py", line 10, in <module> from scripts.utils import ndarray_lru_cache File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- Warning: ControlNet failed to load SGM - will use LDM instead. *** Error loading script: infotext.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/infotext.py", line 7, in <module> from scripts import external_code File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/external_code.py", line 1, in <module> from internal_controlnet.external_code import * # noqa: F403 File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/internal_controlnet/external_code.py", line 7, in <module> from scripts import global_state File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/global_state.py", line 10, in <module> from scripts.utils import ndarray_lru_cache File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- *** Error loading script: utils.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/scripts.py", line 274, in load_scripts script_module = script_loading.load_module(scriptfile.path) File "/content/stable-diffusion-webui/modules/script_loading.py", line 10, in load_module module_spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 883, in exec_module File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed File "/content/stable-diffusion-webui/extensions/sd-webui-controlnet/scripts/utils.py", line 13, in <module> from modules.modelloader import load_file_from_url # noqa: F401 ImportError: cannot import name 'load_file_from_url' from 'modules.modelloader' (/content/stable-diffusion-webui/modules/modelloader.py) --- all detected, remote.moe trying to connect... Warning: Permanently added 'localhost.run' (RSA) to the list of known hosts. all detected, cloudflared trying to connect... Download cloudflared...: 100% 34.8M/34.8M [00:00<00:00, 55.6MB/s] *** Error executing callback ui_tabs_callback for /content/stable-diffusion-webui/extensions/deforum-for-automatic1111-webui/scripts/deforum.py Traceback (most recent call last): File "/content/stable-diffusion-webui/modules/script_callbacks.py", line 153, in ui_tabs_callback res += c.callback() or [] File "/content/stable-diffusion-webui/extensions/deforum-for-automatic1111-webui/scripts/deforum_helpers/ui_right.py", line 101, in on_ui_tabs deforum_gallery = output_panel.gallery AttributeError: 'tuple' object has no attribute 'gallery' --- Calculating sha256 for /content/stable-diffusion-webui/models/Stable-diffusion/realisticVisionV20_v20.safetensors: Public WebUI Colab URL: None Public WebUI Colab URL: https://392938e1-5455-4d87.gradio.live Public WebUI Colab URL: https://0b6c3313e11adf.lhr.life Public WebUI Colab URL: https://controls-agreements-french-indicators.trycloudflare.com Startup time: 36.4s (import torch: 7.1s, import gradio: 1.0s, import ldm: 2.6s, other imports: 2.3s, setup codeformer: 0.2s, load scripts: 19.4s, create ui: 3.5s, gradio launch: 0.3s). preload_extensions_git_metadata for 23 extensions took 1.13s e6415c48928aedc891237556125e56ebd0bb3d9f0982d469ebb719d1117dfb92 Loading weights [e6415c4892] from /content/stable-diffusion-webui/models/Stable-diffusion/realisticVisionV20_v20.safetensors Creating model from config: /content/stable-diffusion-webui/configs/v1-inference.yaml LatentDiffusion: Running in eps-prediction mode DiffusionWrapper has 859.52 M params. vocab.json: 100% 961k/961k [00:00<00:00, 1.20MB/s] merges.txt: 100% 525k/525k [00:00<00:00, 872kB/s] special_tokens_map.json: 100% 389/389 [00:00<00:00, 1.82MB/s] tokenizer_config.json: 100% 905/905 [00:00<00:00, 3.77MB/s] config.json: 100% 4.52k/4.52k [00:00<00:00, 14.7MB/s] Applying attention optimization: xformers... done. Textual inversion embeddings loaded(9): bad-artist, bad-artist-anime, bad-hands-5, bad-image-v2-39000, bad_prompt_version2, EasyNegative, EasyNegativeV2, ng_deepnegative_v1_75t, verybadimagenegative_v1.3 Model loaded in 43.2s (calculate hash: 27.4s, load weights from disk: 2.4s, create model: 8.1s, apply weights to model: 4.4s, load textual inversion embeddings: 0.2s, calculate empty prompt: 0.6s).Which colab and model(s) were you using when the error occurred?
realistic_vision_v20_webui_colab.ipynb
Which Public WebUI Colab URL were you using when the error occurred?
gradio.live
If you used HiRes mode when the error occurred, please provide the Hires info
No response
The text was updated successfully, but these errors were encountered: