Ziwft Virtual Gearing - Tacx Neo2 - Flywheel Spins in gear 6 >1

[me91st]

debug-Fri_Dec_13_19_08_06_2024.log
Using Zwift virtual gears, windows PC with the app running on IOS. In gear selection 6 >1 a small pedal causes the flywheel on the NEO2 to ramp up to a very high speed, this casues no resistance on Zwift in these gears. You can only slows and stop the NEO if you then shift up to a lower gear (around gear 10)

Desktop

• OS: Windows 11
• Version 26100.2605

Smartphone

• Device: iPhone 14
• OS: 18.2
• Version 2.18

[cagnulein]

did you try the gears gain to 0.5 or even less? that's the cause of this because the value 1 is probably too strong for you trainer let me know Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno ven 13 dic 2024 alle ore 16:22 me91st ***@***.***> ha scritto:

…

Assigned #2907 <#2907> to @cagnulein <https://github.com/cagnulein>. — Reply to this email directly, view it on GitHub <#2907 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWCWD7BIGALWOHZMDH32FL3RVAVCNFSM6AAAAABTSGMIUCVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJVGY2TAMJYHEYTKOI> . You are receiving this because you were assigned.Message ID: ***@***.***>

[cagnulein]

Sorry under bike options Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno sab 14 dic 2024 alle 06:08 me91st ***@***.***> ha scritto:

…

Under advanced I can see: Watt Gain Speed Gain Cadence Gain Inclination Gain But no gears gain? Is it the Watt gain I should try? — Reply to this email directly, view it on GitHub <#2907 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWAMMHVX7JQYZTAWSH32FO4ONAVCNFSM6AAAAABTSGMIUCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNBSHAZDGNRXHA> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[me91st]

Hi Not yet, I will test later today.

…

On Fri, 13 Dec 2024 at 20:16, Roberto Viola ***@***.***> wrote: did you try the gears gain to 0.5 or even less? that's the cause of this because the value 1 is probably too strong for you trainer let me know Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno ven 13 dic 2024 alle ore 16:22 me91st ***@***.***> ha scritto: > Assigned #2907 <#2907> > to @cagnulein <https://github.com/cagnulein>. > > — > Reply to this email directly, view it on GitHub > < #2907 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AAALYWCWD7BIGALWOHZMDH32FL3RVAVCNFSM6AAAAABTSGMIUCVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJVGY2TAMJYHEYTKOI> > . > You are receiving this because you were assigned.Message ID: > ***@***.***> > — Reply to this email directly, view it on GitHub <#2907 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AI4FQRYCK4RWKDESRSEQZE32FMB6BAVCNFSM6AAAAABTSGMIUCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNBRG44TCOJVG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[me91st]

Hi

I tested; it reduces the rate at which the NEO flywheel starts to go into crazy spin mode, but at 0.5 you loose top end gears.

With the setting of Gears Gain at 1, the rider does move as expected, and the virtual gears are good, but the disconcerting thing is the NEO is spinning the flywheel at a constant high speed once you have used gears (6>1), even if you are not pedalling. Only clicking up to a gear of around 12 will start to slow the flywheel down to a stop.

[cagnulein]

I didn't quite get it. Are you telling that you can use only higher gear so? High gear are small enough to have a smooth gearing?