"ArraySetNumber3" not updating

[bionic-flamingo]

with an animated array as input ->
"ArraySetNumber" node is correctly updating the output array with logged changes at index and at main loops fps while:
"ArraySetNumber3" does not update with the main loop. It just outputs an static array when triggered.

[steam0r]

hey, not really sure i get what you are trying to do, can you please provide a simple example describing the problem?

this seems to do what i think it should be doing:

[bionic-flamingo]

I sent you an invite :) !
Yes, the sequence op doesnt make any difference.

[steam0r]

connecting the trigger to the reset-port instead of exec will update your array. if it's trigger via exec or by changing the array it's only comparing the lenght of the array (to save time) which is not changing in your example

[steam0r]

aaand, i guess your timer is not updating at 60fps either, so you might use that reset port to trigger the updating of the array a lot less, as it might affect performance....this of course depends on your final setup and not this example case

[steam0r]

maybe like this

[bionic-flamingo]

ahhh ok thank you for pointing that out :). sorry for creating a hustle, I didnt even consider using the reset trigger since on the arraysetnumber its also the execute one that does the job. Should have tried that first before posting :D. I come from using vvvv where the reset pin mostly functions in a different way. Thanks for helping out! Should I close this topic to avoid further confusion for other peeps? Cheers again!