You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When compiling firmware, in step 11 "make flash FLASH_DEVICE=2e8a:0003" I receive this error from avrdude:
lsusb
Bus 001 Device 005: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 006: ID 2e8a:0003
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@fluiddpi:~/klipper $ make flash FLASH_DEVICE=2e8a:0003
Flashing out/klipper.elf.hex to 2e8a:0003 via avrdude
avrdude: ser_open(): can't open device "2e8a:0003": No such file or directory
avrdude done. Thank you.
make: *** [src/avr/Makefile:34: flash] Error 1
pi@fluiddpi:~/klipper $ lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
|__ Port 2: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 12M
|__ Port 2: Dev 6, If 1, Class=Vendor Specific Class, Driver=, 12M
|__ Port 3: Dev 5, If 0, Class=Vendor Specific Class, Driver=ch341, 12M
I'm running Kippler at RPi 3b with Eddy USB v1.0
Kippler v.0.12.0-317-gb89d5523
Moonraker v.0.9.3-0-g71f9e677
Python 3.8
Raspbian GNU/Linux 10 (buster) 4.0
Could please somebody help me?
The text was updated successfully, but these errors were encountered:
Thanks for reaching out. Our support team does not operate using the GitHub platform but we would be happy to help you via email based ticketing system. Please visit https://biqu.equipment/pages/technical-support
and submit a ticket and we will be in touch with you soon.
When compiling firmware, in step 11 "make flash FLASH_DEVICE=2e8a:0003" I receive this error from avrdude:
I'm running Kippler at RPi 3b with Eddy USB v1.0
Could please somebody help me?
The text was updated successfully, but these errors were encountered: