Firecracker relies on KVM and on the processor virtualization features for workload isolation. The host and guest kernels and host microcode must be regularly patched in accordance with your distribution's security advisories such as ALAS for Amazon Linux.
Security guarantees and defense in depth can only be upheld, if the following list of recommendations are implemented in production.
Firecracker uses seccomp filters to limit the system calls allowed by the host OS to the required minimum.
By default, Firecracker uses the most restrictive filters, which is the recommended option for production usage.
Production usage of the --seccomp-filter or --no-seccomp parameters is not
recommended.
Firecracker implements the 8250 serial device, which is visible from the guest
side and is tied to the Firecracker/non-daemonized jailer process stdout.
Without proper handling, because the guest has access to the serial device,
this can lead to unbound memory or storage usage on the host side. Firecracker
does not offer users the option to limit serial data transfer, nor does it
impose any restrictions on stdout handling. Users are responsible for handling
the memory and storage usage of the Firecracker process stdout. We suggest
using any upper-bounded forms of storage, such as fixed-size or ring buffers,
using programs like journald or logrotate, or redirecting to /dev/null
or a named pipe. Furthermore, we do not recommend that users enable the serial
device in production. To disable it in the guest kernel, use the
8250.nr_uarts=0 boot argument when configuring the boot source. Please be
aware that the device can be reactivated from within the guest even if it was
disabled at boot.
If Firecracker's stdout buffer is non-blocking and full (assuming it has a
bounded size), any subsequent writes will fail, resulting in data loss, until
the buffer is freed.
Firecracker outputs logging data into a named pipe, socket, or file using the
path specified in the log_path field of logger configuration. Firecracker can
generate log data as a result of guest operations and therefore the guest can
influence the volume of data written in the logs. Users are responsible
for consuming and storing this data safely. We suggest using any upper-bounded
forms of storage, such as fixed-size or ring buffers, programs like journald
or logrotate, or redirecting to a named pipe.
We recommend adding quiet loglevel=1 to the host kernel command line to limit
the number of messages written to the serial console. This is because some host
configurations can have an effect on Firecracker's performance as the process
will generate host kernel logs during normal operations.
The most recent example of this was the addition of console=ttyAMA0 host
kernel command line argument on one of our testing setups. This enabled console
logging, which degraded the snapshot restore time from 3ms to 8.5ms on
aarch64. In this case, creating the tap device for snapshot restore
generated host kernel logs, which were very slow to write.
Firecracker installs custom signal handlers for some of the POSIX signals, such as SIGSEGV, SIGSYS, etc.
The custom signal handlers used by Firecracker are not async-signal-safe, since they write logs and flush the metrics, which use locks for synchronization. While very unlikely, it is possible that the handler will intercept a signal on a thread which is already holding a lock to the log or metrics buffer. This can result in a deadlock, where the specific Firecracker thread becomes unresponsive.
While there is no security impact caused by the deadlock, we recommend that customers have an overwatcher process on the host, that periodically looks for Firecracker processes that are unresponsive, and kills them, by SIGKILL.
For assuring secure isolation in production deployments, Firecracker should be
started using the jailer binary that's part of each Firecracker release, or
executed under process constraints equal or more restrictive than those in the jailer.
For more about Firecracker sandboxing please see
Firecracker design
The Jailer process applies cgroup, namespace isolation and drops privileges of the Firecracker process.
To set up the jailer correctly, you'll need to:
- Create a dedicated non-privileged POSIX user and group to run Firecracker
under. Use the created POSIX user and group IDs in Jailer's
--uid <uid>and--gid <gid>flags, respectively. This will run the Firecracker as the created non-privileged user and group. All file system resources used for Firecracker should be owned by this user and group. Apply least privilege to the resource files owned by this user and group to prevent other accounts from unauthorized file access. When running multiple Firecracker instances it is recommended that each runs with its uniqueuidandgidto provide an extra layer of security for their individually owned resources in the unlikely case where any one of the jails is broken out of.
Firecracker's customers are strongly advised to use the provided
resource-limits and cgroup functionalities encapsulated within jailer,
in order to control Firecracker's resource consumption in a way that makes
the most sense to their specific workload. While aiming to provide as much
control as possible, we cannot enforce aggressive default constraints
resources such as memory or CPU because these are highly dependent on the
workload type and usecase.
Here are some recommendations on how to limit the process's resources:
-
cgroupprovides a Block IO Controller which allows users to control I/O operations through the following files:blkio.throttle.io_serviced- bounds the number of I/Os issued to diskblkio.throttle.io_service_bytes- sets a limit on the number of bytes transferred to/from the disk
-
Jailer's
resource-limitprovides control on the disk usage through:fsize- limits the size in bytes for files created by the processno-file- specifies a value greater than the maximum file descriptor number that can be opened by the process. If not specified, it defaults to 4096.
cgroupprovides a Memory Resource Controller to allow setting upper limits to memory usage:memory.limit_in_bytes- bounds the memory usagememory.memsw.limit_in_bytes- limits the memory+swap usagememory.soft_limit_in_bytes- enables flexible sharing of memory. Under normal circumstances, control groups are allowed to use as much of the memory as needed, constrained only by their hard limits set with thememory.limit_in_bytesparameter. However, when the system detects memory contention or low memory, control groups are forced to restrict their consumption to their soft limits.
cgroup’s CPU Controller can guarantee a minimum number of CPU shares when a system is busy and provides CPU bandwidth control through:cpu.shares- limits the amount of CPU that each group it is expected to get. The percentage of CPU assigned is the value of shares divided by the sum of all shares in allcgroupsin the same levelcpu.cfs_period_us- bounds the duration in us of each scheduler period, for bandwidth decisions. This defaults to 100mscpu.cfs_quota_us- sets the maximum time in microseconds during eachcfs_period_usfor which the current group will be allowed to runcpuacct.usage_percpu- limits the CPU time, in ns, consumed by the process in the group, separated by CPU
Additional details of Jailer features can be found in the Jailer documentation.
The current implementation results in host CPU usage increase on x86 CPUs when a guest injects timer interrupts with the help of kvm-pit kernel thread. kvm-pit kthread is by default part of the root cgroup.
To mitigate the CPU overhead we recommend two system level configurations.
- Use an external agent to move the
kvm-pit/<pid of firecracker>kernel thread in the microVM’s cgroup (e.g., created by the Jailer). This cannot be done by Firecracker since the thread is created by the Linux kernel after guest start, at which point Firecracker is de-privileged. - Configure the kvm limit to a lower value. This is a system-wide configuration available to users without Firecracker or Jailer changes. However, the same limit applies to APIC timer events, and users will need to test their workloads in order to apply this mitigation.
To modify the kvm limit for interrupts that can be injected in a second.
sudo modprobe -r (kvm_intel|kvm_amd) kvmsudo modprobe kvm min_timer_period_us={new_value}sudo modprobe (kvm_intel|kvm_amd)
To have this change persistent across boots we can append the option to
/etc/modprobe.d/kvm.conf:
echo "options kvm min_timer_period_us=" >> /etc/modprobe.d/kvm.conf
Network can be flooded by creating connections and sending/receiving a significant amount of requests. This issue can be mitigated either by configuring rate limiters for the network interface as explained within Network Interface documentation, or by using one of the tools presented below:
tc qdisc- manipulate traffic control settings by configuring filters.
When traffic enters a classful qdisc, the filters are consulted and the packet is enqueued into one of the classes within. Besides containing other qdiscs, most classful qdiscs perform rate control.
netnamespaceandiptables--pid-owner- can be used to match packets based on the PID that was responsible for themconnlimit- restricts the number of connections for a destination IP address/from a source IP address, as well as limit the bandwidth
Data written to storage devices is managed in Linux with a page cache. Updates to these pages are written through to their mapped storage devices asynchronously at the host operating system's discretion. As a result, high storage output can result in this cache being filled quickly resulting in a backlog which can slow down I/O of other guests on the host.
To protect the resource access of the guests, make sure to tune each Firecracker process via the following tools:
- Jailer: A wrapper environment designed to contain Firecracker
and strictly control what the process and its guest has
access to. Take note of the
jailer operations guide,
paying particular note to the
--resource-limitparameter. - Rate limiting: Rate limiting functionality is supported for both networking and storage devices and is configured by the operator of the environment that launches the Firecracker process and its associated guest. See the block device documentation for examples of calling the API to configure rate limiting.
Memory pressure on a host can cause memory to be written to drive storage when swapping is enabled. Disabling swap mitigates data remanence issues related to having guest memory contents on microVM storage devices.
Verify that swap is disabled by running:
grep -q "/dev" /proc/swaps && \
echo "swap partitions present (Recommendation: no swap)" \
|| echo "no swap partitions (OK)"Note Firecracker is not able to mitigate host's hardware vulnerabilities. Adequate mitigations need to be put in place when configuring the host.
Note Firecracker is designed to provide isolation boundaries between microVMs running in different Firecracker processes. It is strongly recommended that each Firecracker process corresponds to a workload of a single tenant.
Note For security and stability reasons it is highly recommended to load updated microcode as soon as possible. Aside from keeping the system firmware up-to-date, when the kernel is used to load updated microcode of the CPU this should be done as early as possible in the boot process.
It is strongly recommended that users follow the Linux kernel documentation on hardware vulnerabilities when configuring mitigations against side channel attacks including "Spectre" and "Meltdown" attacks (see Page Table Isolation and Speculation Control).
Additionally users should consider disabling Kernel Samepage Merging to mitigate side channel issues relying on the page deduplication for revealing what memory pages are accessed by another process.
Rowhammer is a memory side-channel issue that can lead to unauthorized cross- process memory changes.
Using DDR4 memory that supports Target Row Refresh (TRR) with error-correcting code (ECC) is recommended. Use of pseudo target row refresh (pTRR) for systems with pTRR-compliant DDR3 memory can help mitigate the issue, but it also incurs a performance penalty.
For vendor-specific recommendations, please consult the resources below:
- Intel: Software Security Guidance
- AMD: AMD Product Security
- ARM: Speculative Processor Vulnerability
On ARM, the physical counter (i.e CNTPCT) it is returning the
actual EL1 physical counter value of the host. From the discussions before
merging this change upstream, this seems like a conscious design decision
of the ARM code contributors, giving precedence to performance over the ability
to trap and control this in the hypervisor.
spectre-meltdown-checker script can be used to assess host's resilience against several transient execution CVEs and receive guidance on how to mitigate them.
The script is used in integration tests by the Firecracker team. It can be downloaded and executed like:
# Read https://meltdown.ovh before running it.
wget -O - https://meltdown.ovh | bash