ci

fix(dc): support updated wireshark definitions (#2346) #7410

Sign in to view logs

Triggered via push October 9, 2024 01:37

camshaft

main

Status Success

Total duration 27m 44s

Billable time 14m

Artifacts –

ci.yml

on: push

recovery-simulations

Matrix: clippy

Matrix: dc-wireshark

Matrix: kani

Matrix: loom

Matrix: miri

Matrix: crates

Matrix: examples

Matrix: test

Annotations

202 warnings

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1, camshaft/install@v1, aws-actions/[email protected], ouzi-dev/[email protected]. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1, camshaft/install@v1, aws-actions/[email protected], ouzi-dev/[email protected]. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

recovery-simulations

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

recovery-simulations

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

recovery-simulations

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

recovery-simulations

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

miri (quic/s2n-quic-platform)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

miri (quic/s2n-quic-platform)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

miri (quic/s2n-quic-platform)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

miri (quic/s2n-quic-platform)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/rustls-provider)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/rustls-provider)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/rustls-provider)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/rustls-mtls)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/rustls-provider)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/rustls-mtls)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/rustls-mtls)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/rustls-mtls)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/jumbo-frame)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/jumbo-frame)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/jumbo-frame)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/jumbo-frame)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/dos-mitigation)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/dos-mitigation)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/dos-mitigation)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/dos-mitigation)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/unreliable-datagram)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/unreliable-datagram)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/unreliable-datagram)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/unreliable-datagram)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/resumption)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/resumption)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/resumption)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/resumption)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/async-client-hello-callback)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/async-client-hello-callback)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/async-client-hello-callback)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/async-client-hello-callback)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/turmoil-provider)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/turmoil-provider)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/turmoil-provider)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/turmoil-provider)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/s2n-mtls)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/s2n-mtls)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/s2n-mtls)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/s2n-mtls)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/event-framework)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/event-framework)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/event-framework)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/event-framework)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/echo)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/echo)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/echo)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/echo)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/custom-congestion-controller)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/custom-congestion-controller)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/custom-congestion-controller)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/custom-congestion-controller)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

dc-wireshark (ubuntu-latest)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

dc-wireshark (ubuntu-latest)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

dc-wireshark (ubuntu-latest)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

dc-wireshark (ubuntu-latest)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

clippy (stable, -D warnings)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

clippy (stable, -D warnings)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

clippy (stable, -D warnings)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

clippy (stable, -D warnings)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

clippy (beta)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

clippy (beta)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

clippy (beta)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

clippy (beta)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/post-quantum)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

examples (examples/post-quantum)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

examples (examples/post-quantum)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

examples (examples/post-quantum)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

dc-wireshark (macOS-latest)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

dc-wireshark (macOS-latest)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

dc-wireshark (macOS-latest)

Treating wireshark as a formula. For the cask, use homebrew/cask/wireshark or specify the `--cask` flag. To silence this message, use the `--formula` flag.

dc-wireshark (macOS-latest)

pkg-config 0.29.2_3 is already installed and up-to-date. To reinstall 0.29.2_3, run: brew reinstall pkg-config

dc-wireshark (macOS-latest)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

dc-wireshark (macOS-latest)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (beta, windows-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (beta, windows-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (beta, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (beta, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, windows-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, windows-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (1.74.1, windows-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (1.74.1, windows-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (1.74.1, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (1.74.1, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (nightly-2024-04-16, windows-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (nightly-2024-04-16, windows-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (nightly-2024-04-16, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (nightly-2024-04-16, windows-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

miri (quic/s2n-quic-core)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

miri (quic/s2n-quic-core)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

miri (quic/s2n-quic-core)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

miri (quic/s2n-quic-core)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (nightly-2024-04-16, macOS-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (nightly-2024-04-16, macOS-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (nightly-2024-04-16, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (nightly-2024-04-16, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (1.74.1, macOS-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (1.74.1, macOS-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (1.74.1, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (1.74.1, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, macOS-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, macOS-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (nightly-2024-04-16, ubuntu-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (nightly-2024-04-16, ubuntu-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (nightly-2024-04-16, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (nightly-2024-04-16, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, ubuntu-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (1.74.1, ubuntu-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (1.74.1, ubuntu-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (1.74.1, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (1.74.1, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (beta, ubuntu-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (beta, ubuntu-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (beta, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (beta, ubuntu-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (beta, macOS-latest, native, default)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (beta, macOS-latest, native, default)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (beta, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (beta, macOS-latest, native, default)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

loom (quic/s2n-quic-core)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

loom (quic/s2n-quic-core)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

loom (quic/s2n-quic-core)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

loom (quic/s2n-quic-core)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, i686-unknown-linux-gnu)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, ubuntu-latest, i686-unknown-linux-gnu)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, ubuntu-latest, i686-unknown-linux-gnu)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, i686-unknown-linux-gnu)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)

The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)

The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/