Exception when use tuya zigbee smart knob

[tasict]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

22:39:05.401 MQT: stat/ZBPro/STATUS = {"Status":{"Module":0,"DeviceName":"ZBPro","FriendlyName":["ZBPro"],"Topic":"ZBPro","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
22:39:05.463 MQT: stat/ZBPro/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"https://ota.tasmota.com/tasmota32/tasmota32-zbbrdgpro.bin","RestartReason":"Software reset CPU","Uptime":"0T00:03:54","StartupUTC":"2024-08-24T14:35:11","Sleep":0,"CfgHolder":4617,"BootCount":794,"BCResetTime":"2023-11-11T09:50:51","SaveCount":1165}}
22:39:05.523 MQT: stat/ZBPro/STATUS2 = {"StatusFWR":{"Version":"14.2.0.3(831597e-zbbrdgpro)","BuildDateTime":"2024-08-23T09:26:00","Core":"3_0_4","SDK":"5.1.4.240801","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.0","CR":"407/699"}}
22:39:05.560 MQT: stat/ZBPro/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["NO46-2.4G","NO46"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000695A0A192800000000","00000080","40006082","00004000","00000000"]}}
22:39:05.615 MQT: stat/ZBPro/STATUS4 = {"StatusMEM":{"ProgramSize":1576,"Free":279,"Heap":124,"StackLowMark":3,"PsrMax":0,"PsrFree":0,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","8F8A87CF","00548001","000000CF","010013C0","C0000981","40024080","00200000","5400082C","00000080","00000004"],"Drivers":"1,2,!3,!4,!5,!8,9,10,12,!16,!20,!21,23,24,!27,29,!35,38,!41,50,52,!59,62,!68,82,!121","Sensors":"1,2,3,5,6,127","I2CDriver":"7"}}
22:39:05.688 MQT: stat/ZBPro/STATUS5 = {"StatusNET":{"Hostname":"ZBPro","IPAddress":"10.1.8.25","Gateway":"10.1.8.1","Subnetmask":"255.255.252.0","DNSServer1":"10.1.8.1","DNSServer2":"8.8.8.8","Mac":"40:22:D8:60:7D:04","IP6Global":"fd00:88::4222:d8ff:fe60:7d04","IP6Local":"fe80::4222:d8ff:fe60:7d04%st1","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"10.1.8.1","DNSServer2":"8.8.8.8","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":16.0}}
22:39:05.761 MQT: stat/ZBPro/STATUS6 = {"StatusMQT":{"MqttHost":"mqtt.ctsite.tk","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_607D04","MqttUser":"DVES_USER","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":15}}
22:39:05.810 MQT: stat/ZBPro/STATUS7 = {"StatusTIM":{"UTC":"2024-08-24T14:39:05Z","Local":"2024-08-24T22:39:05","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":"+08:00","Sunrise":"05:31","Sunset":"18:19"}}
22:39:05.848 MQT: stat/ZBPro/STATUS10 = {"StatusSNS":{"Time":"2024-08-24T22:39:05"}}
22:39:05.876 MQT: stat/ZBPro/STATUS11 = {"StatusSTS":{"Time":"2024-08-24T22:39:05","Uptime":"0T00:03:54","UptimeSec":234,"Heap":121,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":1,"Berry":{"HeapUsed":26,"Objects":402},"Wifi":{"AP":2,"SSId":"NO46","BSSId":"E4:38:83:8C:F8:AE","Channel":11,"Mode":"HT20","RSSI":100,"Signal":-21,"LinkCount":1,"Downtime":"0T00:00:04"}}}
22:39:05.938 MQT: stat/ZBPro/STATUS12 = {"StatusSTK":{"Exception":28,"Reason":"LoadProhibited","EPC":"4011c806","EXCVADDR":"00000000","CallChain":["4011c803","401417c2","4013f858","40139aa1","4015e2b6","401402ac","4013f858","401384e0","40139777","40133bd0","4015ec76","4010744f","401034dd","4015f3fb","40109805","40127df7","400dea1c","400d93d1","401501ea"]}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

I encountered an issue while using the Zigbee device Smart Knob (Tuya ERS-10TZBVK-AA) with Tasmota 14.2.0.3 (831597e-zbbrdgpro). When performing a Short Single Press, the ZB Pro crashes and restarts.

EXPECTED BEHAVIOUR

22:35:16.559 MQT: tele/ZBPro/INFO1 = {"Info1":{"Module":"Sonoff Zigbee Pro","Version":"14.2.0.3(831597e-zbbrdgpro)","FallbackTopic":"cmnd/DVES_607D04_fb/","GroupTopic":"cmnd/tasmotas/"}}
22:35:16.596 MQT: tele/ZBPro/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"ZBPro","IPAddress":"10.1.8.25","IP6Global":"","IP6Local":"fe80::4222:d8ff:fe60:7d04%st1"}}
22:35:16.630 MQT: tele/ZBPro/INFO3 = {"Info3":{"RestartReason":{"Exception":28,"Reason":"LoadProhibited","EPC":"4011c806","EXCVADDR":"00000000","CallChain":["4011c803","401417c2","4013f858","40139aa1","4015e2b6","401402ac","4013f858","401384e0","40139777","40133bd0","4015ec76","4010744f","401034dd","4015f3fb","40109805","40127df7","400dea1c","400d93d1","401501ea"]},"BootCount":794}}
22:35:19.311 QPC: Reset

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[s-hadinger]

It's hard to debug without a detailed log from serial. Do you have the opportunity to plug the ZBPro to serial and set seriallog 3?

[tasict]

I suspect that there might be an issue with the Koenkk Zigbee firmware. If I try to patch the latest Koenkk firmware, CC1352P2_CC2652P_launchpad_coordinator_20240710.zip, onto the Sonoff Zigbee Pro, similar to the modifications you made earlier, how should I proceed?

[s-hadinger]

Don't jump to conclusions too quickly. Even if there is a bug in Koenkk firmware, it does not explain a crash of Tasmota.

[s-hadinger]

I have ordered the device, but it will take weeks for delivery

[tasict]

Wow, let me describe it in more detail. This device has two modes: command and event. In the default command mode, rotating the knob doesn’t cause any issues, but single, double, or hold presses all result in a crash. A quick triple press switches it to event mode, and in event mode, everything works fine. I’ll also try to find some time to dump the crash log.

[s-hadinger]

Ok, any log that makes it possible to reproduce the problem is useful.

[github-actions]

This issue has been automatically marked as stale because it hasn't any activity in last few weeks. It will be closed if no further activity occurs. Thank you for your contributions.