No Template and No ILI9342C Display Function on M5 Stack CoreS3

[WH3080]

DO NOT DELETE ANY TEXT from this template! Otherwise the issue will be auto-closed.
-->

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

I recently purchased the M5 Stack CoreS3: https://docs.m5stack.com/en/core/CoreS3?ref=mledqdug It is an ESP32-S3@Xtensa LX7, 16MFLASH AND 8M-PSRAM, WIFI, OTG\CDC functions featuring a Touch IPS LCD screen 2.0"@320*240 ILI9342C: https://www.orientdisplay.com/wp-content/uploads/2021/02/ILI9342C_AN_01_20111228.pdf According to this web page it should run Tasmota including support for the display: https://templates.blakadder.com/m5stack_coreS3.html The instructions say: "after flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration." There is no autoconfig profile to select, so I assigned the GPIOs manually via Template according to this web page: https://docs.m5stack.com/en/core/CoreS3?ref=mledqdug which by the way differ from the recommendations on this webpage: https://templates.blakadder.com/m5stack_coreS3.html The manufacturer (https://docs.m5stack.com/en/core/CoreS3?ref=mledqdug) states that GPIO 35 should be SPI DC, while this web page https://templates.blakadder.com/m5stack_coreS3.html states it should be SPI MISO (which according to the manufacturer is the TF card slot). No GPIO pin information is available which GPIOs should be assigned to display backlight (BL) and display reset (RST).

I used this display.ini https://github.com/arendst/Tasmota/blob/development/tasmota/displaydesc/ILI9342_display.ini However, the display remains black.

:H,ILI9342,320,240,16,SPI,1,,,,,,,,40
:S,2,1,3,0,100,100
:I
EF,3,03,80,02
CF,3,00,C1,30
ED,4,64,03,12,81
E8,3,85,00,78
CB,5,39,2C,00,34,02
F7,1,20
EA,2,00,00
C0,1,23
C1,1,10
C5,2,3e,28
C7,1,86
36,1,48
37,1,00
3A,1,55
B1,2,00,18
B6,3,08,82,27
F2,1,00
26,1,01
E0,0F,0F,31,2B,0C,0E,08,4E,F1,37,07,10,03,0E,09,00
E1,0F,00,0E,14,03,11,07,31,C1,48,08,0F,0C,31,36,0F
21,80
11,80
29,80
:o,28
:O,29
:A,2A,2B,2C,16
:R,36
:0,08,00,00,00
:1,A8,00,00,01
:2,C8,00,00,02
:3,68,00,00,03
:i,21,20
:UTI,FT5206,I2,38,,*
RD A8
CP 11
RTF
RD A3
CP 64
RTF
RT
:UTT
RDM 00 16
MV 2 1
RT
:UTX
MV 3 2
RT
:UTY
MV 5 2
RT

Moreover, I noticed that Tasmota recognizes a particle sensor that is NOT included in the M5 Core S3. It is a separate product: https://shop.m5stack.com/products/pm2-5-air-quality-kit Why?

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): M5 Stack Core S3
• Tasmota binary firmware version number used: tasmota32s3-lvgl.factory.bin [Tasmota 14.4.1.1 (9f3c785-lvgl-haspmota)
  • Pre-compiled
  • Self-compiled
• Flashing tools used: Tasmota ESP Flasher 3.04
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
17:09:41.576 CMD: Grp 0, Cmd 'BACKLOG', Idx 1, Len 26, Pld -99, Data 'Template; Module; GPIO 255'
17:09:41.589 SRC: Backlog
17:09:41.591 CMD: Grp 0, Cmd 'TEMPLATE', Idx 1, Len 0, Pld -99, Data ''
17:09:41.594 RSL: RESULT = {"NAME":"ESP32S3","GPIO":[1,1,6210,768,1,1,1,1,1,1,1,608,640,1,1,1,1,1,1,1,1,1,0,0,800,736,704,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":1}
17:09:41.798 SRC: Backlog
17:09:41.799 CMD: Grp 0, Cmd 'MODULE', Idx 1, Len 0, Pld -99, Data ''
17:09:41.801 RSL: RESULT = {"Module":{"0":"ESP32S3"}}
17:09:42.009 SRC: Backlog
17:09:42.011 CMD: Grp 0, Cmd 'GPIO', Idx 1, Len 3, Pld 255, Data '255'
17:09:42.015 RSL: RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"6210":"Option A3"},"GPIO3":{"768":"SPI CS1"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO6":{"0":"None"},"GPIO7":{"0":"None"},"GPIO8":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO11":{"608":"I2C SCL1"},"GPIO12":{"640":"I2C SDA1"},"GPIO13":{"0":"None"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"},"GPIO18":{"0":"None"},"GPIO19":{"0":"None"},"GPIO20":{"0":"None"},"GPIO21":{"0":"None"},"GPIO33":{"0":"None"},"GPIO34":{"0":"None"},"GPIO35":{"800":"SPI DC1"},"GPIO36":{"736":"SPI CLK1"},"GPIO37":{"704":"SPI MOSI1"},"GPIO38":{"0":"None"},"GPIO39":{"0":"None"},"GPIO40":{"0":"None"},"GPIO41":{"0":"None"},"GPIO42":{"0":"None"},"GPIO43":{"0":"None"},"GPIO44":{"0":"None"},"GPIO45":{"0":"None"},"GPIO46":{"0":"None"},"GPIO47":{"0":"None"},"GPIO48":{"0":"None"}}
17:09:42.273 S5X: Failed to retrieve readings
17:09:43.275 S5X: Failed to retrieve readings
17:09:44.271 S5X: Failed to retrieve readings
17:09:45.272 S5X: Failed to retrieve readings
17:09:46.274 S5X: Failed to retrieve readings
17:09:46.278 WIF: Checking connection...

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

17:13:13.245 CMD: Backlog Rule1
17:13:13.246 SRC: WebConsole from 192.168.178.26
17:13:13.248 CMD: Grp 0, Cmd 'BACKLOG', Idx 1, Len 5, Pld -99, Data 'Rule1'
17:13:13.261 SRC: Backlog
17:13:13.263 CMD: Grp 0, Cmd 'RULE', Idx 1, Len 0, Pld -99, Data ''
17:13:13.265 RSL: RESULT = {"Rule1":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
17:13:13.296 S5X: Failed to retrieve readings

17:13:58.422 SRC: Backlog
17:13:58.424 CMD: Grp 0, Cmd 'RULE', Idx 2, Len 0, Pld -99, Data ''
17:13:58.426 RSL: RESULT = {"Rule2":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
17:13:59.281 S5X: Failed to retrieve readings

17:22:40.951 CMD: Baclog Rule3
17:22:40.952 SRC: WebConsole from 192.168.178.26
17:22:40.954 CMD: Grp 0, Cmd 'BACLOG', Idx 1, Len 5, Pld -99, Data 'Rule3'
17:22:40.957 RSL: RESULT = {"Command":"Unknown","Input":"BACLOG Rule3"}
17:22:41.271 S5X: Failed to retrieve readings
17:22:42.275 S5X: Failed to retrieve readings

• Provide the output of this command: Status 0:

17:23:00.780 CMD: Grp 0, Cmd 'STATUS', Idx 1, Len 1, Pld 0, Data '0'
17:23:00.782 RSL: STATUS = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_66E1D0","ButtonTopic":"0","Power":"1","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
17:23:00.787 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":" ","RestartReason":"Software reset CPU","Uptime":"0T00:16:19","StartupUTC":"2024-12-21T16:06:41","Sleep":50,"CfgHolder":4617,"BootCount":6,"BCResetTime":"2024-12-21T16:33:33","SaveCount":24}}
17:23:00.791 RSL: STATUS2 = {"StatusFWR":{"Version":"14.4.1.1(9f3c785-lvgl-haspmota)","BuildDateTime":"2024-12-21T13:59:07","Core":"3_1_0","SDK":"5.3.2","CpuFrequency":240,"Hardware":"ESP32-S3 v0.2","CR":"401/699"}}
17:23:00.794 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":4,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Cordoba",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]}}
17:23:00.803 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":2627,"Free":252,"Heap":202,"StackLowMark":19,"PsrMax":8192,"PsrFree":8152,"ProgramFlashSize":16384,"FlashSize":16384,"FlashChipId":"184020","FlashFrequency":80,"FlashMode":"QIO","Features":["0809","9FAAD7DF","0005A021","B7F7BFCF","05DA9BC4","60360DC7","480840D2","20200000","D4BC483D","810A80F1","00000014"],"Drivers":"1,2,!3,!4,!5,!8,9,10,11,12,13,!14,!16,!17,!20,!24,26,!27,29,!34,38,50,52,54,55,56,!59,!60,62,!63,!66,!67,!68,!73,!75,82,!86,!87,!88,!121","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,105,109,127","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,58,59,62,65,69,76,77,82,89"}}
17:23:00.809 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota-66E1D0-0464","IPAddress":"192.168.178.54","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.178.1","DNSServer2":"2a03:fc82:205:3400:52e6:36ff:fe29:1d28","Mac":"48:27:E2:66:E1:D0","IP6Global":"2a03:fc82:205:3400:4a27:e2ff:fe66:e1d0","IP6Local":"fe80::4a27:e2ff:fe66:e1d0%st1","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.178.1","DNSServer2":"2a03:fc82:205:3400:52e6:36ff:fe29:1d28","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":19.0}}
17:23:00.815 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_66E1D0","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
17:23:00.819 RSL: STATUS7 = {"StatusTIM":{"UTC":"2024-12-21T16:23:00Z","Local":"2024-12-21T17:23:00","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":"+01:00","Sunrise":"08:41","Sunset":"16:55"}}
17:23:00.824 RSL: STATUS10 = {"StatusSNS":{"Time":"2024-12-21T17:23:00","SEN5X":{"PM1":0.0,"PM2.5":0.0,"PM4":0.0,"PM10":0.0,"NOx":0,"VOC":0,}}}
17:23:00.827 BRY: GC from 9888 to 5593 bytes, objects freed 22/54 (in 1 ms) - slots from 60/152 to 60/152
17:23:00.831 RSL: STATUS11 = {"StatusSTS":{"Time":"2024-12-21T17:23:00","Uptime":"0T00:16:19","UptimeSec":979,"Heap":202,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":0,"Berry":{"HeapUsed":5,"Objects":54},"POWER":"ON","Wifi":{"AP":1,"SSId":"Cordoba","BSSId":"C8:0E:14:04:63:0E","Channel":6,"Mode":"HT40","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:03"}}}
17:23:01.270 S5X: Failed to retrieve readings

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

17:24:19.323 CMD: Weblog 4
17:24:19.324 SRC: WebConsole from 192.168.178.26
17:24:19.325 CMD: Grp 0, Cmd 'WEBLOG', Idx 1, Len 1, Pld 4, Data '4'
17:24:19.326 RSL: RESULT = {"WebLog":4}
17:24:20.281 S5X: Failed to retrieve readings

TO REPRODUCE

Steps to reproduce the behavior:

Screen is black. Webpage shows non existing particle sensor (there is NO particle sensor included in the M5 Stack CoreS3.

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

Functioning screen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

Boot Log:

00:00:00.000 CMD: Using USB CDC
00:00:00.001 HDW: ESP32-S3 v0.2 (PSRAM)
00:00:00.015 UFS: FlashFS mounted with 12588 kB free
00:00:00.023 CFG: Loaded from File, Count 24
00:00:00.025 SER: Set to 8N1 115200 bit/s
00:00:00.025 SER: HWCDC supports 115200 bit/s only
00:00:00.030 QPC: Count 1
00:00:00.031 CFG: CR 401/699, Busy 0
00:00:00.032 SPI: Bus1 using GPIO36(CLK) and GPIO37(MOSI)
00:00:00.033 I2C: Bus1 using GPIO11(SCL) and GPIO12(SDA)
00:00:00.035 I2C: BM8563 found at 0x51
00:00:00.037 RTC: UTC 2024-12-21T16:25:08Z, DST 2024-03-31T02:00:00, STD 2024-10-27T03:00:00
17:25:08.000 RTC: Synced by BM8563
17:25:08.004 TFS: File 'mcp23x.dat' not found
17:25:08.004 MCP: Invalid template
17:25:08.004 TYA: Active=0
17:25:08.007 ROT: Mode 1
17:25:08.011 BRY: GC from 3832 to 3632 bytes, objects freed 4/21 (in 0 ms) - slots from 37/61 to 29/61
17:25:08.023 CFG: No '*.autoconf' file found
17:25:08.028 BRY: GC from 6910 to 5217 bytes, objects freed 9/46 (in 1 ms) - slots from 73/91 to 49/91
17:25:08.028 BRY: Berry initialized, RAM used 5217 bytes
17:25:08.032 BRY: No 'preinit.be'
17:25:08.046 DSP: File descriptor used
17:25:08.745 DSP: ILI9342 initialized
17:25:08.748 SRC: Restart
17:25:08.751 Project tasmota - Tasmota Version 14.4.1.1(9f3c785-lvgl-haspmota)-3_1_0(2024-12-21T13:59:07)
17:25:08.753 LVG: Allocating buffer1 25 KB in main memory (flushlines 40)
17:25:08.758 LVG: LVGL initialized
17:25:08.783 LVG: Refreshed 12800 pixels in 7 ms (1828 pix/ms)
17:25:08.791 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:08.802 LVG: Refreshed 12800 pixels in 7 ms (1828 pix/ms)
17:25:08.813 LVG: Refreshed 12800 pixels in 7 ms (1828 pix/ms)
17:25:08.820 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:08.828 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:08.830 ETH: No ETH MDC and ETH MDIO GPIO defined
17:25:08.842 SHT: Sensor did not ACK command
17:25:09.246 I2C: SEN5X found at 0x69
17:25:09.260 BRY: No 'autoexec.be'
17:25:09.399 CFG: Saved, Count 25, Bytes 4096
17:25:09.424 S5X: Failed to retrieve readings
17:25:09.517 WIF: Checking connection...
17:25:09.517 WIF: Attempting connection...
17:25:10.654 WIF: Connecting to AP1 Cordoba Channel 6 BSSId C8:0E:14:04:63:0E in mode HT40 as tasmota-66E1D0-0464...
17:25:10.679 S5X: Failed to retrieve readings
17:25:10.712 WIF: IPv4 192.168.178.54, mask 255.255.255.0, gateway 192.168.178.1
17:25:11.427 S5X: Failed to retrieve readings
17:25:11.718 WIF: IPv6 Local fe80::4a27:e2ff:fe66:e1d0%st1
17:25:12.024 WIF: Checking connection...
17:25:12.024 WIF: Connected
17:25:12.269 HTP: Web server active on tasmota-66E1D0-0464 with IP address 192.168.178.54
17:25:12.405 NTP: Sync time...
17:25:12.421 WIF: DNS resolved '2.pool.ntp.org' (141.144.230.32) in 15 ms
17:25:12.444 RTC: UTC 2024-12-21T16:25:14Z, DST 2024-03-31T02:00:00, STD 2024-10-27T03:00:00
17:25:14.000 RTC: Synced by NTP
17:25:14.029 S5X: Failed to retrieve readings
17:25:14.133 HTP: Main Menu
17:25:14.274 WIF: IPv6 Global 2a03:fc82:205:3400:4a27:e2ff:fe66:e1d0
17:25:14.275 WIF: IPv6 Global fdc7:4203:630e:0:4a27:e2ff:fe66:e1d0
17:25:14.439 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:14.446 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:14.454 LVG: Refreshed 12800 pixels in 7 ms (1828 pix/ms)
17:25:14.461 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:14.469 LVG: Refreshed 12800 pixels in 7 ms (1828 pix/ms)
17:25:14.476 LVG: Refreshed 12800 pixels in 6 ms (2133 pix/ms)
17:25:14.266 RSL: INFO1 = {"Info1":{"Module":"ESP32S3","Version":"14.4.1.1(9f3c785-lvgl-haspmota)","FallbackTopic":"cmnd/DVES_66E1D0_fb/","GroupTopic":"cmnd/tasmotas/"}}
17:25:14.268 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-66E1D0-0464","IPAddress":"192.168.178.54","IP6Global":"2a03:fc82:205:3400:4a27:e2ff:fe66:e1d0","IP6Local":"fe80::4a27:e2ff:fe66:e1d0%st1"}}
17:25:14.270 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":7}}
17:25:14.272 RSL: RESULT = {"POWER":"ON"}
17:25:14.272 RSL: POWER = ON
17:25:14.275 TFS: File 'autoexec.bat' not found
17:25:14.433 S5X: Failed to retrieve readings
17:25:15.307 HTP: Tools
17:25:15.431 S5X: Failed to retrieve readings

(Please, remember to close the issue when the problem has been addressed)

[Jason2866]

Missing config is no issue. Moving to discussions

[WH3080]

So just for me to understand @Jason2866 - not to complain - what is mentioned here: https://templates.blakadder.com/m5stack_coreS3.html even though it is inaccurate and misleading is irrelevant to the Tasmota development team then? Because this page is not officially affiliated with Tasmota? And that Tasmota firmware recognizes a sensor that is not present in the hardware either? Again, I don't mean to complain just trying to understand where I would find reliable information what hardware is actually supported by Tasmota. That will save me and probably a lot of others time and money. Thank you for your patience, help and guidance @Jason2866 and @arendst. I really like Tasmota for my ESPs and prefer it over ESPHome.

[Jason2866]

Seems the entry for the M5 Stack core S3 is not correct at the template repo site.
We can't check the provided templates, we simply have not the resources for this.
So wrong config appear when users ask. Like you :-)

Have you anything shown on the display?

[arendst]

Ha. I have an ever more optimistic display:

I will have a look now why this is goiung so perfectly not-as-expected.

[arendst]

Ah I see why we never supported this; many peripheral pins are being controlled by the AXP2101 power managemnt chip.

As far as I know tasmota has no support for this chip.

Regarding the SEN5X (0x69) and BH1750 (0x23); they simply pop-up because they have the same I2C address as M5STack CoreS5 hardware has

Many of above devices are not supported by Tasmota.

[s-hadinger]

I did some similar design in Berry driver for M5Stack Core2. If you have the specs I can work on it

[Jason2866]

There is a Berry driver for the AXP192. Maybe theAXP2101 is not so different and code from the AXP192 can be reused.

[Jason2866]

jinx, wrote and Stephan just did in the same time ;-)
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/K128%20CoreS3/AXP2101_Datasheet_V1.0_en.pdf
https://docs.m5stack.com/en/core/CoreS3
https://github.com/m5stack/M5CoreS3

m5stack unified drivers (AXP2101)
https://github.com/m5stack/M5Unified/tree/master/src/utility
https://github.com/m5stack/M5Unified/tree/master#axp2101-usage