-
PROBLEM DESCRIPTIONA clear and concise description of what the problem is. The error log from my Z2M shows the same independent of the version of Z2M (currently v1.40.1): REQUESTED INFORMATIONMake sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
Configuration output here:16:46:47.176 MQT: stat/sonoff_zb_bridge/RESULT = {"NAME":"Sonoff ZHABridge","GPIO":[320,5088,0,5120,323,322,0,0,0,0,0,0,32,0],"FLAG":0,"BASE":18}
Rules output here:
stat/sonoff_zb_bridge/RESULT = {"Rule1":{"State":"ON","Once":"OFF","StopOnError":"OFF","Length":37,"Free":474,"Rules":"ON System#Boot do TCPStart 8888 endon"}}
STATUS 0 output here:
16:50:01.793 MQT: stat/sonoff_zb_bridge/STATUS = {"Status":{"Module":0,"DeviceName":"Sonoff ZHA-Bridge","FriendlyName":["Sonoff ZHA-Bridge"],"Topic":"sonoff_zb_bridge","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
16:50:01.801 MQT: stat/sonoff_zb_bridge/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release-13.2.0/tasmota-zbbridge.bin.gz","RestartReason":"Software/System restart","Uptime":"0T00:33:02","StartupUTC":"2024-09-11T14:16:59","Sleep":50,"CfgHolder":4617,"BootCount":75,"BCResetTime":"2023-10-30T21:13:19","SaveCount":249,"SaveAddress":"F6000"}}
16:50:01.808 MQT: stat/sonoff_zb_bridge/STATUS2 = {"StatusFWR":{"Version":"14.2.0(release-tasmota)","BuildDateTime":"2024-08-14T12:36:35","Boot":31,"Core":"2_7_7","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"423/699"}}
16:50:01.815 MQT: stat/sonoff_zb_bridge/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Telia-1D882E",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00008080","00006000","00004000","00000000"]}}
16:50:01.829 MQT: stat/sonoff_zb_bridge/STATUS4 = {"StatusMEM":{"ProgramSize":648,"Free":352,"Heap":22,"ProgramFlashSize":1024,"FlashSize":2048,"FlashChipId":"1540A1","FlashFrequency":40,"FlashMode":"DOUT","Features":["0809","8F9AC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","54000020","00000080","00000000"],"Drivers":"1,2,!3,!4,!5,!6,7,!8,9,10,12,!16,!18,!19,!20,!21,!22,!24,26,!27,29,!30,!35,!37,!45,62,!68","Sensors":"1,2,3,4,5,6","I2CDriver":"7"}}
16:50:01.840 MQT: stat/sonoff_zb_bridge/STATUS5 = {"StatusNET":{"Hostname":"sonoff-zb-bridge-1263","IPAddress":"192.168.1.115","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.1","DNSServer2":"0.0.0.0","Mac":"98:F4:AB:E3:24:EF","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
16:50:01.846 MQT: stat/sonoff_zb_bridge/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.1.8","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_E324EF","MqttUser":"DVES_USER","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
16:50:01.856 MQT: stat/sonoff_zb_bridge/STATUS7 = {"StatusTIM":{"UTC":"2024-09-11T14:50:01Z","Local":"2024-09-11T16:50:01","StartDST":"2024-03-31T01:00:00","EndDST":"2024-10-27T01:00:00","Timezone":99,"Sunrise":"06:36","Sunset":"19:48"}}
16:50:01.863 MQT: stat/sonoff_zb_bridge/STATUS10 = {"StatusSNS":{"Time":"2024-09-11T16:50:01"}}
16:50:01.870 MQT: stat/sonoff_zb_bridge/STATUS11 = {"StatusSTS":{"Time":"2024-09-11T16:50:01","Uptime":"0T00:33:02","UptimeSec":1982,"Heap":22,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":25,"MqttCount":1,"Wifi":{"AP":1,"SSId":"Telia-1D882E","BSSId":"A2:B5:3C:1D:68:2E","Channel":4,"Mode":"11n","RSSI":100,"Signal":-28,"LinkCount":1,"Downtime":"0T00:00:04"}}}
Console output here:
TO REPRODUCESteps to reproduce the behavior: EXPECTED BEHAVIOURA clear and concise description of what you expected to happen. SCREENSHOTSIf applicable, add screenshots to help explain your problem. ADDITIONAL CONTEXTAdd any other context about the problem here. (Please, remember to close the issue when the problem has been addressed) |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 5 replies
-
|
The issue is that did not upgrade to the zbbridge binary, but instead upgraded away from it, no longer having Zigbee support. It should work if you make sure to use |
Beta Was this translation helpful? Give feedback.
-
|
I do not understand what you mean, please explain? |
Beta Was this translation helpful? Give feedback.
-
|
No, that was not what I meant, but instead what I wrote. You need to upgrade Tasmota to And this is not related to firmware of the Zigbee chip, if you have the version you mentioned, this should be just fine. |
Beta Was this translation helpful? Give feedback.
-
|
Aha - Now I understand what you mean. Of course, how stupid of me!! |
Beta Was this translation helpful? Give feedback.
-
|
BTW. When you only want to use Tasmota as a ser2net bridge to Z2M/ZHA, you really get no benefit from upgrading Tasmota to a recent version, as this is basically Tasmota doing nothing with the device. |
Beta Was this translation helpful? Give feedback.
-
|
I see, thanks for that info. 👍 |
Beta Was this translation helpful? Give feedback.
-
|
Just confirming that after correcting to the right binary, as advised by @sfromis everything is now working as it should 👍 |
Beta Was this translation helpful? Give feedback.
No, that was not what I meant, but instead what I wrote. You need to upgrade Tasmota to
http://ota.tasmota.com/tasmota/release/tasmota-zbbridge.bin.gzThis is not what you did, as evidenced by seeing
"Version":"14.2.0(release-tasmota)"in yourStatus 0output, where it should have beenrelease-zbbridge.The problem is that you instead upgraded to
tasmota.bin.gz, not the correct one.And this is not related to firmware of the Zigbee chip, if you have the version you mentioned, this should be just fine.