Zigbee devices backup

[marjankow]

Is it possible to backup zigbee devices and load them later on the same gateway (after reset for example). Or load them on some other gateway? It is really hard to pair everything again.

[s-hadinger]

No and yes...

The actual zigbee pairing in managed by the MCU, which has its own closed format. You can't backup them.

However, you can transfer the Tasmota mapping (friendly name, last know values...) which are stored in zbv4 and zbdata files. It will save you some configuration time when you pair on the new coordinator

[marjankow]

How to download zbdata? I was able to download zbv4 from Manage File system

[s-hadinger]

zbdata is in the file system as well. If it is not present then it's content is empty and you don't need to care

[marjankow]

When I execute zbdata command via console I see some data
stat/zigbee-bridge-garage/RESULT = {"ZbData":"ZbData 0x77AD,0B2F1ED6662A5139E7D46600040E0101000506010F0000"}
and so on for other devices. When I replace zbv4 on other gateway with the zb4 from above gateway nothing has been changed

[sfromis]

You get nothing from using those files, unless you already have paired the end device.