diff --git a/.github/workflows/example_tester.yml b/.github/workflows/example_tester.yml
index 854c1c83f45..c9dd386cf22 100644
--- a/.github/workflows/example_tester.yml
+++ b/.github/workflows/example_tester.yml
@@ -51,7 +51,7 @@ env:
   MAXIM_PATH: ''
   
 jobs:
-  Example_Tests:
+  Example_Tests_MAX32690:
     # The type of runner that the job will run on
     runs-on: [self-hosted]
     if: github.event.pull_request.draft == false
@@ -89,6 +89,43 @@ jobs:
           lock: false
           all_owned: true
 
+  Example_Tests_MAX78002:
+    # The type of runner that the job will run on
+    runs-on: [self-hosted]
+    if: github.event.pull_request.draft == false
+    
+
+    steps:
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: false
+          repository: analogdevicesinc/msdk
+          fetch-depth: 0
+      
+      - name: Set MAXIM_PATH
+        run: |
+          echo "MAXIM_PATH=$(pwd)" >> $GITHUB_ENV
+          printenv
+
+      - name: Lock Boards
+        uses: Analog-Devices-MSDK/btm-ci-scripts/actions/lock-board@v1.1
+        with:
+          boards: |
+            max78002_board_ex
+          lock: true
+          timeout: 900 # Attempt to lock for an hour
+
+      - name: run_example_test
+        run: |
+          bash .github/workflows/scripts/example_tester_78002.sh max78002_board_ex
+          
+      - name: Unlock Boards
+        if: always()
+        uses: Analog-Devices-MSDK/btm-ci-scripts/actions/lock-board@v1.1
+        with:
+          lock: false
+          all_owned: true
   
 
  
diff --git a/.github/workflows/scripts/example_tester.sh b/.github/workflows/scripts/example_tester.sh
index 2d3211d263a..26f5eeffdb4 100644
--- a/.github/workflows/scripts/example_tester.sh
+++ b/.github/workflows/scripts/example_tester.sh
@@ -63,9 +63,9 @@ function init() {
 
 		if [[ $1 = "SPI" || $1 = "SPI_v2" || $1 = "ADC" || $1 = "UART" ]];
 		then
-			make -C $Path/$testName METHOD=$2
+			make -j -C $Path/$testName METHOD=$2
 		else
-			make -C $Path/$testName
+			make -j -C $Path/$testName
 		fi
 	fi
 
diff --git a/.github/workflows/scripts/example_tester_78002.sh b/.github/workflows/scripts/example_tester_78002.sh
new file mode 100644
index 00000000000..00281ad31cb
--- /dev/null
+++ b/.github/workflows/scripts/example_tester_78002.sh
@@ -0,0 +1,353 @@
+#! /usr/bin/bash
+
+<<"CONFIGURATION"
+The following is the configuration for hardware (max78002): 
+Close jumper (RX - P0.0) and (TX - P0.1) at Headers JP23 (UART 0 EN).
+Install headers JP9 and JP10 to SDA and SCL respectively.
+You must connect P0.10 to P0.16 (SCL) and P0.11 to P0.17 (SDA)
+Connect P0.12 to P1.1. Connect P0.13 to P1.0. for UART test
+Connect P0.21 (MOSI) to P0.22 (MISO).
+Apply an input voltage between 0 and 1.25V to pin labeled 0 of the JH6 (Analog) header. for ADC
+CONFIGURATION
+
+
+# variable for configuration
+baudRate=115200
+timeLimit=5
+timeLimitICC=30 #ICC needs around 20s to finish the test
+boardVersion=max78002
+#boardName=max78002-1
+boardName=$1
+uartPort=$(resource_manager -g $boardName.console_port)
+target_uc=$(resource_manager -g $boardName.target)
+Path=$MAXIM_PATH/Examples/$target_uc
+
+# variable for testing purpose
+tempFile=.temp.txt
+result_UART_INTERRUPT='not tested'
+result_UART_DMA='not tested'
+result_HelloWorld='not tested'
+result_HelloWorld_Cpp='not tested'
+result_TRNG='not tested'
+result_I2C='not tested'
+result_SPI='not tested'
+result_ICC='not tested'
+result_DMA='not tested'
+result_CRC='not tested'
+result_ADC_DMA='not tested'
+result_Lib_Gen='not tested'
+result_Lib_Use='not tested'
+
+function init() {
+	# print the testcase
+	echo "-------------------------------------------------------------------"
+	echo "Start testing $1 Example:"
+	# clean the temp file
+	rm -rf $tempFile
+	sleep 2
+
+	# do initialization, compiler and flash the code
+	testName=$1
+	if [[ $testName != Library_Use ]]
+	then
+		make -C $Path/$testName distclean
+
+		if [[ $1 == "ADC" || $1 == "UART" ]]; then
+    		make -j -C "$Path/$testName" METHOD="$2"
+		else
+    		make -j -C "$Path/$testName"
+		fi
+
+	fi
+
+	if [[ $testName != Library_Generate && $testName != Library_Use ]]
+	then
+		stty -F $uartPort $baudRate
+		ocdflash $boardName $Path/$testName/build/$boardVersion.elf 
+		if [[ $testName = ICC ]]
+		then
+			timeout $timeLimitICC cat $uartPort > $tempFile
+		else
+			timeout $timeLimit cat $uartPort > $tempFile
+		fi
+	fi
+}
+
+function test_Hello_World()  {
+	init Hello_World
+
+	# start testing the output
+	grep "Hello World!" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_HelloWorld='pass'
+	else
+		result_HelloWorld='fail'
+	fi
+
+	printf "Test result for Hello_World: $result_HelloWorld\n"
+
+}
+
+function test_Hello_World_Cpp()  {
+	init Hello_World_Cpp
+
+	# start testing the output
+	grep "C++ Hello World Example" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_HelloWorld_Cpp='pass'
+	else
+		result_HelloWorld_Cpp='fail'
+	fi
+
+	printf "Test result for Hello_World_Cpp: $result_HelloWorld_Cpp\n"
+
+}
+
+function test_UART() {
+	init UART INTERRUPT
+
+	# start testing the output
+	grep "Example Succeeded" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_UART_INTERRUPT='pass'
+	else
+		result_UART_INTERRUPT='fail'
+	fi
+	
+	printf "Test result for UART_INTERRUPT: $result_UART_INTERRUPT\n"
+	init UART DMA
+
+	# start testing the output
+	grep "Example Succeeded" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_UART_DMA='pass'
+	else
+		result_UART_DMA='fail'
+	fi
+	
+	printf "Test result for UART_DMA: $result_UART_DMA\n"
+}
+
+function test_TRNG() {
+	init TRNG
+
+	# start testing the output
+	grep "Test Complete" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_TRNG='pass'
+	else
+		result_TRNG='fail'
+	fi
+	
+	printf "Test result for TRNG: $result_TRNG\n"
+	
+}
+
+
+function test_I2C() {
+	init I2C
+
+	# start testing the output
+	grep "I2C Transaction Successful" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_I2C='pass'
+	else
+		result_I2C='fail'
+	fi
+	
+	printf "Test result for I2C: $result_I2C\n"
+	
+}
+
+function test_SPI() {
+	init SPI
+
+	# start testing the output
+	grep "16 Bits Transaction Successful" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_SPI='pass'
+	else
+		result_SPI='fail'
+	fi
+	
+	printf "Test result for SPI: $result_SPI\n"
+	
+	
+}
+
+function test_ICC() {
+	init ICC
+
+	# start testing the output
+	grep "Example Succeeded" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_ICC='pass'
+	else
+		result_ICC='fail'
+	fi
+	
+	printf "Test result for ICC: $result_ICC\n"
+	
+}
+
+
+function test_DMA() {
+	init DMA
+
+	# start testing the output
+	grep "Example Succeeded" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_DMA='pass'
+	else
+		result_DMA='fail'
+	fi
+	
+	printf "Test result for DMA: $result_DMA\n"
+	
+}
+
+function test_CRC() {
+	init CRC
+
+	# start testing the output
+	grep "Example Succeeded" $tempFile
+	if [[ $? -eq 0 ]];
+	then
+		result_CRC='pass'
+	else
+		result_CRC='fail'
+	fi
+	
+	printf "Test result for CRC: $result_CRC\n"
+	
+}
+
+
+function test_ADC() {
+
+	init ADC DMA
+
+	# start testing the output
+	result_ADC_DMA='pass'
+	grep "Running Single Channel Example" $tempFile
+	if [[ $? -ne 0 ]];
+	then
+		result_ADC_DMA='fail'
+	fi
+	
+	grep "Running Temperature Sensor Example" $tempFile
+	if [[ $? -ne 0 ]];
+	then
+		result_ADC_DMA='fail'
+	fi
+
+	grep "Running Multi Channel Example" $tempFile
+	if [[ $? -ne 0 ]];
+	then
+		result_ADC_DMA='fail'
+	fi
+	printf "Test result for ADC_DMA: $result_ADC_DMA\n"
+}
+
+function test_Lib_Gen() {
+	init Library_Generate
+
+	# start testing the output
+	find $Path/$testName/build/$boardVersion.a
+	if [[ $? -eq 0 ]];
+	then
+		result_Lib_Gen='pass'
+	else
+		result_Lib_Gen='fail'
+	fi
+	
+	printf "Test result for Library_Generate: $result_Lib_Gen\n"
+	
+}
+
+function test_Lib_Use() {
+	init Library_Use
+
+	# start testing the output
+	make -C $Path/$testName distclean
+	make -C $Path/$testName
+	if [[ $? -eq 0 ]];
+	then
+		result_Lib_Use='pass'
+	else
+		result_Lib_Use='fail'
+	fi
+	
+	printf "Test result for Library_Use: $result_Lib_Use\n"
+	
+}
+
+function summary() {
+	printf "*************************Result Summary****************************\n"
+	printf "Test result for Hello_World: $result_HelloWorld\n"
+	printf "Test result for Hello_World_Cpp: $result_HelloWorld_Cpp\n"
+	printf "Test result for UART_INTERRUPT: $result_UART_INTERRUPT\n"
+	printf "Test result for UART_DMA: $result_UART_DMA\n"
+	printf "Test result for TRNG: $result_TRNG\n"
+	printf "Test result for I2C: $result_I2C\n"
+	printf "Test result for SPI: $result_SPI\n"
+	printf "Test result for ICC: $result_ICC\n"
+	printf "Test result for DMA: $result_DMA\n"
+	printf "Test result for CRC: $result_CRC\n"
+	printf "Test result for ADC_DMA: $result_ADC_DMA\n"
+	printf "Test result for Library_Generate: $result_Lib_Gen\n"
+	printf "Test result for Library_Use: $result_Lib_Use\n"
+	
+}
+
+function main() {
+	test_UART
+	if [[ $result_UART_INTERRUPT = 'fail' ]]
+	then
+		printf "Since UART INTERRUPT test fails, example test stops. "
+		return
+	fi
+	test_Hello_World
+	test_Hello_World_Cpp
+	test_TRNG
+	test_I2C
+	test_SPI
+	test_DMA
+	test_CRC
+	test_ADC
+	test_ICC
+	test_Lib_Gen
+	test_Lib_Use
+
+	summary
+	# clean the temp file
+	rm -rf $tempFile
+}
+
+main
+if [[ $result_UART_INTERRUPT = "fail" || 
+	$result_UART_DMA = "fail" ||
+	$result_HelloWorld = "fail" ||
+    $result_HelloWorld_Cpp = "fail" ||
+    $result_TRNG = "fail" ||
+    $result_I2C = "fail" ||
+ 	$result_SPI = "fail" ||
+    $result_ICC = "fail" ||
+    $result_DMA = "fail" ||
+    $result_CRC = "fail" ||
+    $result_ADC_DMA = "fail" ||
+    $result_Lib_Gen = "fail" ||
+    $result_Lib_Use = "fail" ]]; then
+	exit 2
+	else
+	exit 0
+fi