diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c index a492e8f2fc0fb..58af9629dbd9f 100644 --- a/drivers/iio/dac/ad3552r.c +++ b/drivers/iio/dac/ad3552r.c @@ -13,122 +13,7 @@ #include #include #include - -/* Register addresses */ -/* Primary address space */ -#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A 0x00 -#define AD3552R_MASK_SOFTWARE_RESET (BIT(7) | BIT(0)) -#define AD3552R_MASK_ADDR_ASCENSION BIT(5) -#define AD3552R_MASK_SDO_ACTIVE BIT(4) -#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B 0x01 -#define AD3552R_MASK_SINGLE_INST BIT(7) -#define AD3552R_MASK_SHORT_INSTRUCTION BIT(3) -#define AD3552R_REG_ADDR_DEVICE_CONFIG 0x02 -#define AD3552R_MASK_DEVICE_STATUS(n) BIT(4 + (n)) -#define AD3552R_MASK_CUSTOM_MODES GENMASK(3, 2) -#define AD3552R_MASK_OPERATING_MODES GENMASK(1, 0) -#define AD3552R_REG_ADDR_CHIP_TYPE 0x03 -#define AD3552R_MASK_CLASS GENMASK(7, 0) -#define AD3552R_REG_ADDR_PRODUCT_ID_L 0x04 -#define AD3552R_REG_ADDR_PRODUCT_ID_H 0x05 -#define AD3552R_REG_ADDR_CHIP_GRADE 0x06 -#define AD3552R_MASK_GRADE GENMASK(7, 4) -#define AD3552R_MASK_DEVICE_REVISION GENMASK(3, 0) -#define AD3552R_REG_ADDR_SCRATCH_PAD 0x0A -#define AD3552R_REG_ADDR_SPI_REVISION 0x0B -#define AD3552R_REG_ADDR_VENDOR_L 0x0C -#define AD3552R_REG_ADDR_VENDOR_H 0x0D -#define AD3552R_REG_ADDR_STREAM_MODE 0x0E -#define AD3552R_MASK_LENGTH GENMASK(7, 0) -#define AD3552R_REG_ADDR_TRANSFER_REGISTER 0x0F -#define AD3552R_MASK_MULTI_IO_MODE GENMASK(7, 6) -#define AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE BIT(2) -#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C 0x10 -#define AD3552R_MASK_CRC_ENABLE (GENMASK(7, 6) |\ - GENMASK(1, 0)) -#define AD3552R_MASK_STRICT_REGISTER_ACCESS BIT(5) -#define AD3552R_REG_ADDR_INTERFACE_STATUS_A 0x11 -#define AD3552R_MASK_INTERFACE_NOT_READY BIT(7) -#define AD3552R_MASK_CLOCK_COUNTING_ERROR BIT(5) -#define AD3552R_MASK_INVALID_OR_NO_CRC BIT(3) -#define AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER BIT(2) -#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS BIT(1) -#define AD3552R_MASK_REGISTER_ADDRESS_INVALID BIT(0) -#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D 0x14 -#define AD3552R_MASK_ALERT_ENABLE_PULLUP BIT(6) -#define AD3552R_MASK_MEM_CRC_EN BIT(4) -#define AD3552R_MASK_SDO_DRIVE_STRENGTH GENMASK(3, 2) -#define AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN BIT(1) -#define AD3552R_MASK_SPI_CONFIG_DDR BIT(0) -#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG 0x15 -#define AD3552R_MASK_IDUMP_FAST_MODE BIT(6) -#define AD3552R_MASK_SAMPLE_HOLD_DIFFERENTIAL_USER_EN BIT(5) -#define AD3552R_MASK_SAMPLE_HOLD_USER_TRIM GENMASK(4, 3) -#define AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE BIT(2) -#define AD3552R_MASK_REFERENCE_VOLTAGE_SEL GENMASK(1, 0) -#define AD3552R_REG_ADDR_ERR_ALARM_MASK 0x16 -#define AD3552R_MASK_REF_RANGE_ALARM BIT(6) -#define AD3552R_MASK_CLOCK_COUNT_ERR_ALARM BIT(5) -#define AD3552R_MASK_MEM_CRC_ERR_ALARM BIT(4) -#define AD3552R_MASK_SPI_CRC_ERR_ALARM BIT(3) -#define AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM BIT(2) -#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM BIT(1) -#define AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM BIT(0) -#define AD3552R_REG_ADDR_ERR_STATUS 0x17 -#define AD3552R_MASK_REF_RANGE_ERR_STATUS BIT(6) -#define AD3552R_MASK_DUAL_SPI_STREAM_EXCEEDS_DAC_ERR_STATUS BIT(5) -#define AD3552R_MASK_MEM_CRC_ERR_STATUS BIT(4) -#define AD3552R_MASK_RESET_STATUS BIT(0) -#define AD3552R_REG_ADDR_POWERDOWN_CONFIG 0x18 -#define AD3552R_MASK_CH_DAC_POWERDOWN(ch) BIT(4 + (ch)) -#define AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch) BIT(ch) -#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE 0x19 -#define AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch) ((ch) ? GENMASK(7, 4) :\ - GENMASK(3, 0)) -#define AD3552R_REG_ADDR_CH_OFFSET(ch) (0x1B + (ch) * 2) -#define AD3552R_MASK_CH_OFFSET_BITS_0_7 GENMASK(7, 0) -#define AD3552R_REG_ADDR_CH_GAIN(ch) (0x1C + (ch) * 2) -#define AD3552R_MASK_CH_RANGE_OVERRIDE BIT(7) -#define AD3552R_MASK_CH_GAIN_SCALING_N GENMASK(6, 5) -#define AD3552R_MASK_CH_GAIN_SCALING_P GENMASK(4, 3) -#define AD3552R_MASK_CH_OFFSET_POLARITY BIT(2) -#define AD3552R_MASK_CH_OFFSET_BIT_8 BIT(0) -/* - * Secondary region - * For multibyte registers specify the highest address because the access is - * done in descending order - */ -#define AD3552R_SECONDARY_REGION_START 0x28 -#define AD3552R_REG_ADDR_HW_LDAC_16B 0x28 -#define AD3552R_REG_ADDR_CH_DAC_16B(ch) (0x2C - (1 - ch) * 2) -#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B 0x2E -#define AD3552R_REG_ADDR_CH_SELECT_16B 0x2F -#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B 0x31 -#define AD3552R_REG_ADDR_SW_LDAC_16B 0x32 -#define AD3552R_REG_ADDR_CH_INPUT_16B(ch) (0x36 - (1 - ch) * 2) -/* 3 bytes registers */ -#define AD3552R_REG_START_24B 0x37 -#define AD3552R_REG_ADDR_HW_LDAC_24B 0x37 -#define AD3552R_REG_ADDR_CH_DAC_24B(ch) (0x3D - (1 - ch) * 3) -#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B 0x40 -#define AD3552R_REG_ADDR_CH_SELECT_24B 0x41 -#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B 0x44 -#define AD3552R_REG_ADDR_SW_LDAC_24B 0x45 -#define AD3552R_REG_ADDR_CH_INPUT_24B(ch) (0x4B - (1 - ch) * 3) - -/* Useful defines */ -#define AD3552R_NUM_CH 2 -#define AD3552R_MASK_CH(ch) BIT(ch) -#define AD3552R_MASK_ALL_CH GENMASK(1, 0) -#define AD3552R_MAX_REG_SIZE 3 -#define AD3552R_READ_BIT BIT(7) -#define AD3552R_ADDR_MASK GENMASK(6, 0) -#define AD3552R_MASK_DAC_12B 0xFFF0 -#define AD3552R_DEFAULT_CONFIG_B_VALUE 0x8 -#define AD3552R_SCRATCH_PAD_TEST_VAL1 0x34 -#define AD3552R_SCRATCH_PAD_TEST_VAL2 0xB2 -#define AD3552R_GAIN_SCALE 1000 -#define AD3552R_LDAC_PULSE_US 100 +#include "ad3552r.h" enum ad3552r_ch_vref_select { /* Internal source with Vref I/O floating */ @@ -139,24 +24,6 @@ enum ad3552r_ch_vref_select { AD3552R_EXTERNAL_VREF_PIN_INPUT }; -enum ad3542r_id { - AD3542R_ID = 0x4009, - AD3552R_ID = 0x4008, -}; - -enum ad3552r_ch_output_range { - /* Range from 0 V to 2.5 V. Requires Rfb1x connection */ - AD3552R_CH_OUTPUT_RANGE_0__2P5V, - /* Range from 0 V to 5 V. Requires Rfb1x connection */ - AD3552R_CH_OUTPUT_RANGE_0__5V, - /* Range from 0 V to 10 V. Requires Rfb2x connection */ - AD3552R_CH_OUTPUT_RANGE_0__10V, - /* Range from -5 V to 5 V. Requires Rfb2x connection */ - AD3552R_CH_OUTPUT_RANGE_NEG_5__5V, - /* Range from -10 V to 10 V. Requires Rfb4x connection */ - AD3552R_CH_OUTPUT_RANGE_NEG_10__10V, -}; - static const s32 ad3552r_ch_ranges[][2] = { [AD3552R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500}, [AD3552R_CH_OUTPUT_RANGE_0__5V] = {0, 5000}, @@ -165,21 +32,6 @@ static const s32 ad3552r_ch_ranges[][2] = { [AD3552R_CH_OUTPUT_RANGE_NEG_10__10V] = {-10000, 10000} }; -enum ad3542r_ch_output_range { - /* Range from 0 V to 2.5 V. Requires Rfb1x connection */ - AD3542R_CH_OUTPUT_RANGE_0__2P5V, - /* Range from 0 V to 3 V. Requires Rfb1x connection */ - AD3542R_CH_OUTPUT_RANGE_0__3V, - /* Range from 0 V to 5 V. Requires Rfb1x connection */ - AD3542R_CH_OUTPUT_RANGE_0__5V, - /* Range from 0 V to 10 V. Requires Rfb2x connection */ - AD3542R_CH_OUTPUT_RANGE_0__10V, - /* Range from -2.5 V to 7.5 V. Requires Rfb2x connection */ - AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V, - /* Range from -5 V to 5 V. Requires Rfb2x connection */ - AD3542R_CH_OUTPUT_RANGE_NEG_5__5V, -}; - static const s32 ad3542r_ch_ranges[][2] = { [AD3542R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500}, [AD3542R_CH_OUTPUT_RANGE_0__3V] = {0, 3000},