README.md

Home assistant add-on: Arpspoof

Thanks to everyone having starred my repo! To star it click on the image below, then it will be on top right. Thanks!

About

arpspoof adds ability to block internet connection for local network devices This addon is based on the docker image https://hub.docker.com/r/techblog/arpspoof-docker

See all informations here : https://en.techblog.co.il/2021/03/15/home-assistant-cut-internet-connection-using-arpspoof/ , on in the upstream image documentation : https://github.com/t0mer/Arpspoof-Docker

Installation

The installation of this add-on is pretty straightforward and not different in comparison to installing any other add-on.

1. Add my add-ons repository to your home assistant instance (in supervisor addons store at top right, or click button below if you have configured my HA)
2. Install this add-on.
3. Click the Save button to store your configuration.
4. Set the add-on options to your preferences
5. Start the add-on.
6. Check the logs of the add-on to see if everything went well.
7. Open the webUI and adapt the software options

Configuration

Webui can be found at http://homeassistant:PORT.

ROUTER_IP: 127.0.0.1 #Required Router IP
INTERFACE_NAME: name #Required Interface name. Autofilled if empty.

Home-Assistant configuration

Description : techblog

You can use a command_line switch to temporary disable a internet device in your network.

- platform: command_line
  switches:
    iphone_internet:
      friendly_name: "iPhone internet"
      command_off: "/usr/bin/curl -f -X GET http://{HA-IP}:7022/disconnect?ip={iPhoneIP}"
      command_on: "/usr/bin/curl -f -X GET http://{HA-IP}:7022/reconnect?ip={iPhoneIP}"
      command_state: "/usr/bin/curl -f -X GET http://{HA-IP}:7022/status?ip={iPhoneIP}"
      value_template: >
        {{ value != "1" }}

Support

Create an issue on github

Illustration

No illustration