lcd.py

from machine import Pin
from gpio_lcd import GpioLcd

# Create the LCD object
lcd = GpioLcd(rs_pin=Pin(8),
              enable_pin=Pin(9),
              d4_pin=Pin(10),
              d5_pin=Pin(11),
              d6_pin=Pin(12),
              d7_pin=Pin(13),
              num_lines=2, num_columns=16)

# #The following line of codes should be tested using the REPL
#
# #1. To print a string to the lcd, you can use
# lcd.putstr("agoktuga")
# #2. Now, to clear the display.
# lcd.clear()
# #3. and to exactly position the cursor location
# lcd.move_to(1,1)
# # If you do not set the cursor position,
# # the character will be displayed in the
# # default cursor position starting from
# # 0, x and 0, y location which is the top left-hand side.
# # There are other useful functions we can use in using the lcd.
# #4. Show the cursor
# lcd.show_cursor()
# #5. Hide the cursor
# lcd.hide_cursor()
# #6. Turn ON blinking cursor
# lcd.blink_cursor_on()
# #7. Turn OFF blinking cursor
# lcd.blink_cursor_off()
# #8. Disable display
# lcd.display_off()
# this will only hide the characters
# #9. Enable display
# lcd.display_on()
# #10. Turn backlight OFF
# lcd.backlight_off()
# #11. Turn backlight ON
# lcd.backlight_on()
# # 12. Print a single character
# lcd.putchar('x')
# but this will only print 1 character
# #13. Display a custom characters
# happy_face = bytearray([0x00,0x0A,0x00,0x04,0x00,0x11,0x0E,0x00])
# lcd.custom_char(0, happy_face)
# lcd.putchar(chr(0))