-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathPCD8544_SPI.h
228 lines (201 loc) · 10.6 KB
/
PCD8544_SPI.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
/********************************************************************
This is a "Fast PCD8544 Library". It is designed to be used with
Nokia 5110 type of display, driven by the PCD8544 controller.
This library uses hardware SPI of your Arduino microcontroller,
and does not supprt 'software SPI' mode.
Written by Arthur Liberman (aka 'The Coolest'). http://www.alcpu.com
Special thanks goes out to 'robtillaart' for his help with debugging
and optimization.
BSD license, check license.txt for more information.
All text above must be included in any redistribution.
********************************************************************/
// Version 1.2 -- Sept. 15, 2013
#pragma once
#include "Arduino.h"
// It is very important to wire the LCD correctly.
// The following is the default wiring configuration for an Atmega168/328 based Arduino:
// PIN_DC D8
// PIN_RESET D9
// PIN_SCE D10
// PIN_SDIN D11
// PIN_SCLK D13
// You may change pins DC, Reset and SCE to map them to different pins on your Arduino board.
// Please keep SDIN and SCLK connected to your Arduino's MOSI and SCK (hardware SPI) pins.
// You can remap the LCD control pins by changing the following '#define' values:
// Please refer to the pin/port mapping for your Arduino device:
// http://arduino.cc/en/Hacking/PinMapping168
// http://arduino.cc/en/Hacking/PinMapping2560
// Pins labeled Px (PB, PC, etc.) stand for PORTx.
// The current version of this library only allows the use of one port for the control pins.
// Pins are mapped in binary order. Valid values are 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80.
// Px0 is the LSB pin of the port, which in turn is represented by the hexadecimal number 0x01.
// Px7 is the MSB pin of the port, which in turn is represented by the hexadecimal number 0x80.
// This is the port where the LCD is connected.
#define PCD8544_PORT PORTB
#define PCD8544_DDR DDRB // Should be DDRx, x = port name (B, C, D, etc.)
#define PIN_DC 0x01 // D8
#define PIN_RESET 0x02 // D9
#define PIN_CE 0x04 // D10
#define PINS_CE_DC (PIN_DC | PIN_CE)
// When DC is '1' the LCD expects data, when it is '0' it expects a command.
#define PCD8544_COMMAND 0
#define PCD8544_DATA PIN_DC
// You may find a different size screen, but this one is 84 by 48 pixels
#define PCD8544_X_PIXELS 84
#define PCD8544_Y_PIXELS 48
#define PCD8544_ROWS 6
#define BUF_LEN 504 // 84 * 6 (6 rows of 8 bits)
// Functions gotoXY, writeBitmap, renderString, writeLine and writeRect
// will return PCD8544_SUCCESS if they succeed and PCD8544_ERROR if they fail.
#define PCD8544_SUCCESS 1
#define PCD8544_ERROR 0
class PCD8544_SPI : public Print
{
public:
PCD8544_SPI();
void begin(bool invert = false);
void begin(bool invert, uint8_t vop, uint8_t tempCoef, uint8_t bias);
void clear();
uint8_t gotoXY(uint8_t x, uint8_t y);
virtual size_t write(uint8_t uint8_t);
uint8_t writeBitmap(const uint8_t *bitmap[], uint8_t x, uint8_t y, uint8_t width, uint8_t height);
private:
//void init(void);
void writeLcd(uint8_t dataOrCommand, uint8_t data);
void writeLcd(uint8_t dataOrCommand, const uint8_t *data, uint16_t count);
uint8_t m_Column;
uint8_t y_Position;
uint8_t m_Line;
void advanceXY(uint8_t columns);
};
class PCD8544_SPI_FB : public Print
{
public:
PCD8544_SPI_FB();
// Call a render method after any print/write methods are called.
// For best perofrmance aggragate all writes before calling a render method.
void renderAll();
uint8_t renderString(uint8_t x, uint8_t y, uint16_t length);
void setPixel(uint8_t x, uint8_t y, uint8_t value);
// WriteLine currently only supports horizontal and vertical lines.
uint8_t writeLine(uint8_t x1, uint8_t y1, uint8_t x2, uint8_t y2);
uint8_t writeRect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, bool fill = false);
void begin(bool invert = false);
void begin(bool invert, uint8_t vop, uint8_t tempCoef, uint8_t bias);
void clear(bool render = true);
uint8_t gotoXY(uint8_t x, uint8_t y);
//ADDED BY ANDRE
void calcmPosition();
virtual size_t write(uint8_t uint8_t);
uint8_t writeBitmap(const uint8_t *bitmap, uint8_t x, uint8_t y, uint8_t width, uint8_t height);
private:
//void init(void);
void writeLcd(uint8_t dataOrCommand, uint8_t data);
void writeLcd(uint8_t dataOrCommand, const uint8_t *data, uint16_t count);
inline void swap(uint8_t &a, uint8_t &b);
uint16_t m_Position;
uint8_t x_Position;
uint8_t y_Position;
uint8_t m_Buffer[BUF_LEN];
};
//This table contains the hex values that represent pixels
//for a font that is 5 pixels wide and 8 pixels high
//CHANGED!!!
static const PROGMEM uint8_t ASCII[][5] = {
{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char
,{0x00, 0x00, 0x17, 0x00, 0x00,} // Code for char !
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char "
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char #
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char $
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char %
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char &
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char '
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char (
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char )
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char *
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char +
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char ,
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char -
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char .
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char /
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 0
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 1
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 2
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 3
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 4
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 5
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 6
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 7
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 8
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char 9
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char :
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char ;
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char <
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char =
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char >
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char ?
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char @
,{0x1F, 0x05, 0x05, 0x05, 0x1F,} // Code for char A
,{0x1F, 0x15, 0x15, 0x15, 0x0E,} // Code for char B
,{0x0E, 0x11, 0x11, 0x11, 0x11,} // Code for char C
,{0x1F, 0x11, 0x11, 0x11, 0x0E,} // Code for char D
,{0x1F, 0x15, 0x15, 0x15, 0x15,} // Code for char E
,{0x1F, 0x05, 0x05, 0x05, 0x05,} // Code for char F
,{0x0E, 0x11, 0x11, 0x15, 0x0D,} // Code for char G
,{0x1F, 0x04, 0x04, 0x04, 0x1F,} // Code for char H
,{0x00, 0x00, 0x1F, 0x00, 0x00,} // Code for char I
,{0x08, 0x10, 0x10, 0x10, 0x0F,} // Code for char J
,{0x1F, 0x04, 0x0A, 0x0A, 0x11,} // Code for char K
,{0x1F, 0x10, 0x10, 0x10, 0x10,} // Code for char L
,{0x1F, 0x02, 0x04, 0x02, 0x1F,} // Code for char M
,{0x1F, 0x02, 0x04, 0x08, 0x1F,} // Code for char N
,{0x0E, 0x11, 0x11, 0x11, 0x0E,} // Code for char O
,{0x1F, 0x05, 0x05, 0x05, 0x02,} // Code for char P
,{0x0E, 0x11, 0x11, 0x19, 0x0E,} // Code for char Q
,{0x1F, 0x05, 0x05, 0x05, 0x1A,} // Code for char R
,{0x12, 0x15, 0x15, 0x15, 0x09,} // Code for char S
,{0x01, 0x01, 0x1F, 0x01, 0x01,} // Code for char T
,{0x0F, 0x10, 0x10, 0x10, 0x0F,} // Code for char U
,{0x03, 0x0C, 0x10, 0x0C, 0x03,} // Code for char V
,{0x1F, 0x08, 0x04, 0x08, 0x1F,} // Code for char W
,{0x11, 0x0A, 0x04, 0x0A, 0x11,} // Code for char X
,{0x11, 0x0A, 0x04, 0x02, 0x01,} // Code for char Y
,{0x11, 0x19, 0x15, 0x13, 0x11,} // Code for char Z
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char [
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char BackSlash
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char ]
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char ^
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char _
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char `
,{0x1F, 0x05, 0x05, 0x05, 0x1F,} // Code for char A
,{0x1F, 0x15, 0x15, 0x15, 0x0E,} // Code for char B
,{0x0E, 0x11, 0x11, 0x11, 0x11,} // Code for char C
,{0x1F, 0x11, 0x11, 0x11, 0x0E,} // Code for char D
,{0x1F, 0x15, 0x15, 0x15, 0x15,} // Code for char E
,{0x1F, 0x05, 0x05, 0x05, 0x05,} // Code for char F
,{0x0E, 0x11, 0x11, 0x15, 0x0D,} // Code for char G
,{0x1F, 0x04, 0x04, 0x04, 0x1F,} // Code for char H
,{0x00, 0x00, 0x1F, 0x00, 0x00,} // Code for char I
,{0x08, 0x10, 0x10, 0x10, 0x0F,} // Code for char J
,{0x1F, 0x04, 0x0A, 0x0A, 0x11,} // Code for char K
,{0x1F, 0x10, 0x10, 0x10, 0x10,} // Code for char L
,{0x1F, 0x02, 0x04, 0x02, 0x1F,} // Code for char M
,{0x1F, 0x02, 0x04, 0x08, 0x1F,} // Code for char N
,{0x0E, 0x11, 0x11, 0x11, 0x0E,} // Code for char O
,{0x1F, 0x05, 0x05, 0x05, 0x02,} // Code for char P
,{0x0E, 0x11, 0x11, 0x19, 0x0E,} // Code for char Q
,{0x1F, 0x05, 0x05, 0x05, 0x1A,} // Code for char R
,{0x12, 0x15, 0x15, 0x15, 0x09,} // Code for char S
,{0x01, 0x01, 0x1F, 0x01, 0x01,} // Code for char T
,{0x0F, 0x10, 0x10, 0x10, 0x0F,} // Code for char U
,{0x03, 0x0C, 0x10, 0x0C, 0x03,} // Code for char V
,{0x1F, 0x08, 0x04, 0x08, 0x1F,} // Code for char W
,{0x11, 0x0A, 0x04, 0x0A, 0x11,} // Code for char X
,{0x11, 0x0A, 0x04, 0x02, 0x01,} // Code for char Y
,{0x11, 0x19, 0x15, 0x13, 0x11,} // Code for char Z
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char {
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char |
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char }
,{0x00, 0x00, 0x00, 0x00, 0x00,} // Code for char ~
,{0x00, 0x00, 0x00, 0x00, 0x00 } // Code for char
};