diff --git a/docs/Edge/Raspberry_Pi_Devices/reComputer_R1000/recomputer_r.md b/docs/Edge/Raspberry_Pi_Devices/reComputer_R1000/recomputer_r.md
index 587f9ba861ef..87e19e92e7b5 100644
--- a/docs/Edge/Raspberry_Pi_Devices/reComputer_R1000/recomputer_r.md
+++ b/docs/Edge/Raspberry_Pi_Devices/reComputer_R1000/recomputer_r.md
@@ -7,8 +7,8 @@ keywords:
 image: https://files.seeedstudio.com/wiki/wiki-platform/S-tempor.png
 slug: /recomputer_r
 last_update:
-  date: 05/06/2024
-  author: Parker Hu
+  date: 01/08/2025
+  author: Joshua Lee
 ---
 
 <!-- ---
@@ -527,43 +527,51 @@ If the ACT LED doesn't blink, then the EEPROM code might be corrupted, try again
 STICKY: Is your Pi not booting? (The Boot Problems Sticky) - Raspberry Pi Forums
 For more detail please check the [Raspberry Pi forum](https://forums.raspberrypi.com//viewtopic.php?f=28&t=58151).
 
-In this section we will use the raspi-gpio tool to test with GPIOs, you can use the raspi-gpio help to view the manual:
+To control the user LEDs, we recommend using sysfs, a pseudo-filesystem provided by the Linux kernel that exposes information about various kernel subsystems, hardware devices, and their associated drivers. On the ReComputer R1000, we have abstracted the user LED interface into three device files (led-red, led-blue, and led-green), enabling users to control the LED lights simply by interacting with these files. The examples are as follows:
+
+1. To turn on the red LED, please enter following command in the Terminal:
 
 ```bash
-raspi-gpio help
+echo 1 | sudo tee /sys/class/leds/led-red/brightness
 ```
-<div align="center"><img width={600} src="https://files.seeedstudio.com/wiki/reComputer-R1000/recomputer_r_images/17.png" /></div>
-1. The pin controlling the third LED of reComputer R1000 is gpio20. To get specific GPIO status, Please enter following command in the Terminal :
+
+2. To turn off the red LED, please enter following command in the Terminal:
 
 ```bash
-raspi-gpio get 20
+echo 0 | sudo tee /sys/class/leds/led-red/brightness
 ```
-<div align="center"><img width={600} src="https://files.seeedstudio.com/wiki/reComputer-R1000/recomputer_r_images/18.png" /></div>
-2. Change the state of gpio20:
+
+3. You can turn on red and green LED at the same time, please enter following command in the Terminal:
 
 ```bash
-#set current pin state
-sudo raspi-gpio set 20 dl
-#get the pin state after set
-raspi-gpio get 20
+echo 1 | sudo tee /sys/class/leds/led-red/brightness
+echo 1 | sudo tee /sys/class/leds/led-green/brightness
 ```
-<div align="center"><img width={600} src="https://files.seeedstudio.com/wiki/reComputer-R1000/recomputer_r_images/19.png" /></div>
-3. The third led-user LED will light up.
-<div align="center"><img width={600} src="https://files.seeedstudio.com/wiki/reComputer-R1000/recomputer_r_images/20.png" /></div>
 
 ### Buzzer
 
 <div align="left"><img width={300} src="https://files.seeedstudio.com/wiki/reComputer-R1000/recomputer_r_images/fig07.png" /></div>
 
-The reComputer R1000 features an active buzzer, which can be used for various purposes such as alarm and event notifications. The buzzer is controlled through GPIO21 to CM4.
+The reComputer R1000 features an active buzzer, which can be used for various purposes such as alarm and event notifications. The buzzer is controlled through GPIO21 to CM4 in reComputer R1000 v1.0, and GPIO20 to CM4 in reComputer R1000 1.1.
+
+:::note
+To distinguish between the hardware revision (v1.0 and v1.1), you can refer to [reComputer R1000 V1.1 Product change details](https://wiki.seeedstudio.com/recomputer_r1000_v1_1_description/).
+:::
+
+For reComputer R1000 v1.0 users, the buzzer is connected to GPIO-21, to turn on/off the buzzer, Please enter following command in the Terminal:
+
+```bash
+raspi-gpio set 21 op dh # turn on
+raspi-gpio set 21 op dl # turn off
+```
 
-To turn off(on) the buzzer, Please enter following command in the Terminal :
+For reComputer R1000 v1.1 users, the buzzer is connected to PCA9535 P15, to turn off(on) the buzzer, Please enter following command in the Terminal :
 
 ```bash
-# Turn off the buzzer using LED brightness
-raspi-gpio set 21 op dl
-# Turn on the buzzer using LED brightness
-raspi-gpio set 21 op dh
+echo 591 | sudo tee /sys/class/gpio/export
+echo out | sudo tee /sys/class/gpio/gpio591/direction
+echo 1 | sudo tee /sys/class/gpio/gpio591/value # turn on
+echo 0 | sudo tee /sys/class/gpio/gpio591/value # turn off
 ```
 
 ### RS485
diff --git a/docs/Network/Meshtastic_Network/SenseCAP_Indicator/sensecap_indicator_meshtastic.md b/docs/Network/Meshtastic_Network/SenseCAP_Indicator/sensecap_indicator_meshtastic.md
index 7b64e1f567fd..c1d0fb30bc66 100644
--- a/docs/Network/Meshtastic_Network/SenseCAP_Indicator/sensecap_indicator_meshtastic.md
+++ b/docs/Network/Meshtastic_Network/SenseCAP_Indicator/sensecap_indicator_meshtastic.md
@@ -24,7 +24,7 @@ last_update:
 </div>
 
 <div class="get_one_now_container" style={{textAlign: 'center'}}>
-    <a class="get_one_now_item" href="https://www.seeedstudio.com/catalogsearch/result/?q=sensecap%20indicator">
+    <a class="get_one_now_item" href="https://www.seeedstudio.com/SenseCAP-Indicator-D1L-for-Meshtastic-p-6304.html">
             <strong><span><font color={'FFFFFF'} size={"4"}> Get One Now 🖱️</font></span></strong>
     </a>
 </div>
@@ -33,6 +33,20 @@ last_update:
 
 SenseCAP Indicator is a 4-inch touchscreen device designed for Meshtastic®, powered by dual MCUs, the ESP32 and RP2040, and supports Wi-Fi, BLE, and LoRa®. It is an open-source, powerful IoT development platform.
 
+
+
+:::caution note
+During the process of continuous optimization and testing of the SenseCAP Indicator for Meshtastic, we found a situation that may affect your experience. In order to ensure that you can continue to enjoy the best product performance, we are currently optimizing this feature, so shipments may be delayed.
+
+**Identified Issue**<br/>
+In the `LONGFAST`, `LONGSLOW`, and `MIDSLOW` settings, message content exceeding `50 bytes` may result in instability and CRC errors.
+
+**Special Service for Previous Purchasers**<br/>
+If you are a previous purchaser and have the same issue, we are offering a special service to assist you. Please contact us at `sensecap@seeed.cc` and include your order number for support.
+
+Thank you for your understanding as we work to provide the best possible user experience.
+:::
+
 ## Introduction
 
 ### Feature
@@ -69,6 +83,9 @@ SenseCAP Indicator is a 4-inch touchscreen device designed for Meshtastic®, pow
 
 ## Flash Firmware
 
+:::tip
+The Fancy-UI firmware has not been officially released yet, it's recommended to flash the Classic-UI firmware described in this wiki.
+:::
 
 ### Flash Application Firmware
 
diff --git a/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_nRF52840-Sense/XIAO_BLE.md b/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_nRF52840-Sense/XIAO_BLE.md
index 936f24b2f30d..d6eef72d4bd8 100644
--- a/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_nRF52840-Sense/XIAO_BLE.md
+++ b/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_nRF52840-Sense/XIAO_BLE.md
@@ -17,47 +17,107 @@ import TabItem from '@theme/TabItem';
 
 <meta name="google-site-verification" content="2bq3L0F_PFVokQM-qT-al7x9FcSNJOO8TtJfAHW43lE" />
 
-<div class="table-center">
-	<table align="center">
-  <tr>
-    <th>XIAO nRF52840</th>
-    <th>XIAO nRF52840 Sense</th>
-    <th>XIAO nRF52840 Plus</th>
-    <th>XIAO nRF52840 Sense Plus</th>
-  </tr>
-  <tr>
-    <td><div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO-BLE/1-102010469-Seeed-Studio-XIAO-nRF52840-Sense-45font.jpg" style={{width:250, height:'auto'}}/></div></td>
-    <td><div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO-BLE/xiaonrf52840sence.png" style={{width:250, height:'auto'}}/></div></td>
-    <td><div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO-BLE/xiaonrf52840plus.png" style={{width:250, height:'auto'}}/></div></td>
-    <td><div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/XIAO-BLE/xiaonrf52840senceplus.png" style={{width:250, height:'auto'}}/></div></td>
-  </tr>
-  <tr>      
-    <td><div class="get_one_now_container" style={{textAlign: 'center'}}>
-        <a class="get_one_now_item" href="https://www.seeedstudio.com/Seeed-XIAO-BLE-nRF52840-p-5201.html">
-                <strong><span><font color={'FFFFFF'} size={"4"}> Get One Now 🖱️</font></span></strong>
-        </a>
-    </div>
-    </td>
-    <td><div class="get_one_now_container" style={{textAlign: 'center'}}>
-        <a class="get_one_now_item" href="https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html">
-                <strong><span><font color={'FFFFFF'} size={"4"}> Get One Now 🖱️</font></span></strong>
-        </a>
-    </div>
-    </td>
-    <td><div class="get_one_now_container" style={{textAlign: 'center'}}>
-        <a class="get_one_now_item" href="https://wiki.seeedstudio.com/XIAO_BLE/">
-                <strong><span><font color={'FFFFFF'} size={"4"}> Get One Now 🖱️</font></span></strong>
-        </a>
-    </div>
-    </td>
-    <td><div class="get_one_now_container" style={{textAlign: 'center'}}>
-        <a class="get_one_now_item" href="https://wiki.seeedstudio.com/XIAO_BLE/">
-                <strong><span><font color={'FFFFFF'} size={"4"}> Get One Now 🖱️</font></span></strong>
-        </a>
-    </div>
-    </td>
-  </tr>
-</table>
+<div className="w-full overflow-x-auto">
+  <table className="min-w-full">
+    <tr>
+      <th>XIAO nRF52840</th>
+      <th>XIAO nRF52840 Sense</th>
+      <th>XIAO nRF52840 Plus</th>
+      <th>XIAO nRF52840 Sense Plus</th>
+    </tr>
+    <tr>
+      <td>
+        <div style={{textAlign: 'center'}}>
+          <img 
+            src="https://files.seeedstudio.com/wiki/XIAO-BLE/1-102010469-Seeed-Studio-XIAO-nRF52840-Sense-45font.jpg"
+            style={{width: '100%', maxWidth: '250px', height: 'auto'}}
+          />
+        </div>
+      </td>
+      <td>
+        <div style={{textAlign: 'center'}}>
+          <img 
+            src="https://files.seeedstudio.com/wiki/XIAO-BLE/xiaonrf52840sence.png"
+            style={{width: '100%', maxWidth: '250px', height: 'auto'}}
+          />
+        </div>
+      </td>
+      <td>
+        <div style={{textAlign: 'center'}}>
+          <img 
+            src="https://files.seeedstudio.com/wiki/XIAO-BLE/xiaonrf52840plus.png"
+            style={{width: '100%', maxWidth: '250px', height: 'auto'}}
+          />
+        </div>
+      </td>
+      <td>
+        <div style={{textAlign: 'center'}}>
+          <img 
+            src="https://files.seeedstudio.com/wiki/XIAO-BLE/xiaonrf52840senceplus.png"
+            style={{width: '100%', maxWidth: '250px', height: 'auto'}}
+          />
+        </div>
+      </td>
+    </tr>
+    <tr>
+      <td>
+        <div className="get_one_now_container" style={{textAlign: 'center'}}>
+          <a 
+            className="get_one_now_item" 
+            href="https://www.seeedstudio.com/Seeed-XIAO-BLE-nRF52840-p-5201.html"
+          >
+            <strong>
+              <span>
+                <font color={'FFFFFF'} size={"4"}> Get One Now 🖱</font>
+              </span>
+            </strong>
+          </a>
+        </div>
+      </td>
+      <td>
+        <div className="get_one_now_container" style={{textAlign: 'center'}}>
+          <a 
+            className="get_one_now_item" 
+            href="https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html"
+          >
+            <strong>
+              <span>
+                <font color={'FFFFFF'} size={"4"}> Get One Now 🖱</font>
+              </span>
+            </strong>
+          </a>
+        </div>
+      </td>
+      <td>
+        <div className="get_one_now_container" style={{textAlign: 'center'}}>
+          <a 
+            className="get_one_now_item" 
+            href="https://wiki.seeedstudio.com/XIAO_BLE/"
+          >
+            <strong>
+              <span>
+                <font color={'FFFFFF'} size={"4"}> Get One Now 🖱</font>
+              </span>
+            </strong>
+          </a>
+        </div>
+      </td>
+      <td>
+        <div className="get_one_now_container" style={{textAlign: 'center'}}>
+          <a 
+            className="get_one_now_item" 
+            href="https://wiki.seeedstudio.com/XIAO_BLE/"
+          >
+            <strong>
+              <span>
+                <font color={'FFFFFF'} size={"4"}> Get One Now 🖱</font>
+              </span>
+            </strong>
+          </a>
+        </div>
+      </td>
+    </tr>
+  </table>
 </div>
 
 As the first wireless product in the Seeed Studio XIAO family, **Seeed Studio XIAO nRF52840** is equipped with a powerful **Nordic nRF52840 MCU** which integrates **Bluetooth 5.0** connectivity. Meanwhile, it has a **small and exquisite form-factor** which can be used for wearable devices and Internet of Things projects. The **single-sided surface-mountable design** and the onboard **Bluetooth antenna** can greatly facilitate the rapid deployment of IoT projects.
diff --git a/docs/Sensor/SenseCAP/SenseCAP_LoRaWAN_Sensor/SenseCAP_A1102/TrainAI_With_A1102.md b/docs/Sensor/SenseCAP/SenseCAP_LoRaWAN_Sensor/SenseCAP_A1102/TrainAI_With_A1102.md
index 587378ae1b56..fb12934cb082 100644
--- a/docs/Sensor/SenseCAP/SenseCAP_LoRaWAN_Sensor/SenseCAP_A1102/TrainAI_With_A1102.md
+++ b/docs/Sensor/SenseCAP/SenseCAP_LoRaWAN_Sensor/SenseCAP_A1102/TrainAI_With_A1102.md
@@ -1,77 +1,122 @@
 ---
 description: Train_AI_With_A1102
-title: SenseCraft AI With A1102
+title: Deploy AI Models on SenseCAP A1102 Using SenseCraft AI
 keywords:
 - Sensor Vision_AI_V2
-image: https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/20.webp
+- SenseCAP A1102
+- SenseCraft AI
+image: https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/top2.webp
 slug: /train_ai_with_a1102
 sidebar_position: 2
-sidebar_class_name: hidden
+# sidebar_class_name: hidden
 last_update:
   date: 12/23/2024
   author: Jason
 ---
 
-# Deploying models to SenseCAP A1102 with SenseCraft AI
+# Deploying AI Models on SenseCAP A1102 Using SenseCraft AI
 
+The SenseCAP A1102 is a powerful sensor device that combines advanced AI capabilities with ease of deployment. This guide will walk you through deploying AI models on the A1102 using the **SenseCraft AI** app, offering step-by-step instructions for pairing, configuration, and testing.
 
 <div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/20.jpg" style={{width:800, height:'auto'}}/></div>
 
 
-### Connect with SenseCraft APP
+## **Getting Started with SenseCAP A1102**
 
+### **What is SenseCAP A1102?**
+The SenseCAP A1102 is an intelligent camera sensor designed for edge AI applications. Equipped with 8GB of memory, it can:
+- Deploy custom AI models.
+- Automatically save recognized images.
+- Enable real-time recognition with high accuracy.
 
-**Step 1 :**Press and hold for three seconds for device pairing
+### **Requirements**
+Before starting, ensure you have:
+- The SenseCAP A1102 device.
+- The **SenseCraft AI** app installed on your smartphone.
+- Any pre-trained AI model for deployment.
+
+
+## **Connecting the SenseCAP A1102 to SenseCraft AI**
+
+### **Device Pairing**
+
+Press and hold the power button on the SenseCAP A1102 for **three seconds** to enable pairing mode.
 
 <div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/11.png" style={{width:400, height:'auto'}}/></div>
 
-**Setp 2 :**  When the serial number is scanned, click on Pairing.
+In the SenseCraft AI app, scan the serial number of the A1102 device and tap on **Pairing**.
 
 <div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/12.png" style={{width:400, height:'auto'}}/></div>
 
-**Setp 3 :** Click on Advanced Settings
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/13.png" style={{width:400, height:'auto'}}/></div>
+## **Configuring the SenseCAP A1102**
 
-**Setp 4 :** Click on Advanced Settings
+### **Access Advanced Settings**
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/14.png" style={{width:400, height:'auto'}}/></div>
+Once paired, click on **Advanced Settings** in the SenseCraft AI app.
 
-**Setp 5 :** Click on our camera models for pairing
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/SenseCraft_APP/1.png" style={{width:400, height:'auto'}}/></div>
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/15.png" style={{width:400, height:'auto'}}/></div>
+Navigate to additional configuration options by clicking **Advanced Settings** again.
 
-**Setp 6 :** Select the AI model we need to deploy
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/SenseCraft_APP/2.png" style={{width:400, height:'auto'}}/></div>
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/16.png" style={{width:400, height:'auto'}}/></div>
 
+## **Deploying an AI Model**
 
-**Step 7 .** Select whether to save the recognizer image and set the confidence level
+### **Selecting an AI Model**
+From the settings menu, select your desired AI model for deployment. Choose from pre-loaded models or upload a custom model.
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/17.png" style={{width:400, height:'auto'}}/></div>
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/SenseCraft_APP/3.png" style={{width:400, height:'auto'}}/></div>
 
-:::tip
-Equipped with 8GB of memory, the A1102 is able to automatically save images to the memory card when a target is recognized. When we need to access this image information, we can extract and access the required image data directly from the memory card.
-:::
+### **Configuring Model Parameters**
+Set parameters like:
+- **Confidence Level**: Adjust the threshold for object recognition (e.g., 80% confidence).
+- **Save Recognized Images**: Enable or disable saving recognized images to the memory card.
+
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/SenseCraft_APP/5.png" style={{width:400, height:'auto'}}/></div>
+
+
+## **Testing and Running the Model**
+
+### **Preview Camera Capture**
+After deploying the model, preview the camera's captured images directly in the app to ensure the model is working as expected.
 
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/SenseCraft_APP/7.png" style={{width:400, height:'auto'}}/></div>
 
-**Step 8 .** Return to the APP homepage to see the device information of A1102
+### **View Device Information**
+Return to the app's homepage to check the device information of the A1102, such as model status, connectivity.
 
 <div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/18.png" style={{width:400, height:'auto'}}/></div>
 
-**Step 9 .** Tap it again to see the recognized information, here as an example of 5 minutes to report the recognition results
+### **Review Recognition Results**
+View the recognition data and logs. For example, set a reporting interval (e.g., every 5 minutes) to track recognized objects.
 
-<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/19.png" style={{width:400, height:'auto'}}/></div>
 
 
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/SenseCraft_APP/11.jpg" style={{width:400, height:'auto'}}/></div>
 
 
-<!-- ## Program on Arduino Connecting With Seeed Studio XIAO Board
+### **Accessing the SD Card**
+Locate the gap in the A1102 unit and gently insert a screwdriver. Apply a little force to pry it open.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/8.jpg" style={{width:400, height:'auto'}}/></div>
 
-The SenseCAP A1102 integrates Vision AI V2 and the XIAO ESP32 C3, providing a powerful platform for deploying your favorite models. When you need to deploy a model on the XIAO, you can refer to this wiki(https://wiki.seeedstudio.com/grove_vision_ai_v2_software_support/) for detailed guidance and resources to help you get started! -->
+Locate the four screw holes and rotate the knobs to open them. Make sure to apply consistent pressure while turning to ensure they come loose.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/9.jpg" style={{width:400, height:'auto'}}/></div>
 
 
-# Tech Support
+Once the screws are loosened, remove the cover to access the SD card slot. You can then take out the SD card to read the information stored inside.
+<div style={{textAlign:'center'}}><img src="https://files.seeedstudio.com/wiki/A1102/SenseCraft_AI_With_A1102/A1102_10.jpg" style={{width:400, height:'auto'}}/></div>
+
+### **Automatic Image Saving**
+With 8GB of internal memory, the A1102 can automatically save recognized images to a memory card. Access and retrieve these images later for analysis or reporting.
+
+:::tip
+Equipped with 8GB of memory, the A1102 is able to automatically save images to the memory card when a target is recognized. When we need to access this image information, we can extract and access the required image data directly from the memory card.
+:::
+
+
+## **Tech Support & Product Discussion**
 
 Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.
 
@@ -83,6 +128,4 @@ Thank you for choosing our products! We are here to provide you with different s
 <div class="button_tech_support_container">
 <a href="https://discord.gg/eWkprNDMU7" class="button_discord"></a> 
 <a href="https://github.com/Seeed-Studio/wiki-documents/discussions/69" class="button_discussion"></a>
-</div>
-
-
+</div>
\ No newline at end of file
diff --git a/sidebars.js b/sidebars.js
index 3d2f66b822de..76116b30ed7e 100644
--- a/sidebars.js
+++ b/sidebars.js
@@ -1823,6 +1823,7 @@ const sidebars = {
           label: 'For v2 Users',
           items: [
             'Sensor/ReSpeaker_2-Mics_Pi_HAT/v2/ReSpeaker_2_Mics_Pi_HAT_Raspberry_v2',
+            'Sensor/ReSpeaker_2-Mics_Pi_HAT/v2/ReSpeaker_2_Mics_Pi_Hat_v2_Speech_Recognition',
           ],
         },
         'Sensor/ReSpeaker_2-Mics_Pi_HAT/ReSpeaker_2_Mics_Pi_HAT-Hardware-Revisions',