Skip to content

Latest commit

 

History

History
103 lines (87 loc) · 5.22 KB

README.md

File metadata and controls

103 lines (87 loc) · 5.22 KB
Raw

WMR-and-Vive-Tracker

Tutorial on how to use Vive Tracker for head tracking of WMR headset within SteamVR

NOTE: If you're C++ dev and somewhat familiar with OpenVR and you'd like to contribute to this project send me a discord message: Yersinia#0091

!!!Proceed at your own risk, make sure to back up the configuration files, I'm not responsible if you brick your equipment following this guide!!!

What you'll need:

  1. WMR Headset (eg. Reverb G2)
  2. Vive tracker (2.0 Recommended, 3.0 manifested increased drift in my testing)
  3. 3D Printed mount for Vive Tracker. (My remix: https://www.thingiverse.com/thing:4817158 , you don't need OVR Input Emulator with this mount. Some people had success with tripod phone mounts, you can try to use that if you don't have 3D printer.)
  4. Long 5m long USB cable. (Optional)

INSTRUCTIONS:

  1. (Uninstall OpenVR Input Emulator if you have it installed)
  2. Mount your Vive tracker to the Headset, You must mount the Tracker on the front of the headset with Charging port facing upwards. You can use my remix if you want to do this with Reverb G2 (https://www.thingiverse.com/thing:4817158), Mount the tracker with metal screw (Printed one will break for sure ;) I used this screw: https://www.amazon.co.uk/gp/product/B00OOLKD30
  3. Connect your Vive tracker to SteamVR either using USB cable with 5m extension or via its dongle. (I'm using PASSIVE 5m USB extension cable with Active hub at the end so I can plug in both Tracker and Facial tracker. Cable: https://www.amazon.co.uk/gp/product/B01M4PKURH?psc=1 , Hub: https://www.amazon.co.uk/gp/product/B00TPMEOYM?psc=1) BIG NOTE: I tried using active 5m USB extension cable which didn't work and resulted in unusable tracking quality, avoid active cables.
  4. Update your tracker firmware through SteamVR if needed
  5. Assign your tracker a 'Camera' role in SteamVR (Controllers>Manage Vive Trackers)
  6. Exit SteamVR
  7. Now you need to edit your steamvr.vrsettings (located in C:\Program Files (x86)\Steam\config)

Add a following line:

  "TrackingOverrides" : {    
     "/devices/htc/vive_trackerLHR-SERIALGOESHERE" : "/user/head" 
  },

Replace SERIALGOESHERE with your trackers serial number which you can find in "trackers" section use the tracker with camera role:

  "trackers" : {
     "/devices/htc/vive_trackerLHR-YOURSERIAL" : "TrackerRole_Camera"
  }
  1. Save the file.
  2. Turn on your tracker and start SteamVR.
  3. Upon opening SteamVR your headset should be now tracked with Vive Tracker, try to test it by obscuring trackers view and seeing if image stutters.

APPLY OFFSET TO TRACKER FIRMWARE:

  1. Exit SteamVR
  2. For safety, disconnect all SteamVR devices (HMDs, Trackers, Dongles...)
  3. Connect just your head Vive tracker with USB cable
  4. Run lighthouse_console.exe (Usually in: C:\Program Files (x86)\Steam\steamapps\common\SteamVR\tools\lighthouse\bin\win64)
  5. Execute this commands:
  • serial (you shold see only your tracker connected as LHR-YOURSERIAL from previous steps.)
  • serial LHR-YOURSERIAL
  • downloadconfig
  1. You will now have config file LHR-YOURSERIAL.json in the same directory, Back up this file! (IMPORTANT)
  2. Open the config with notepad and edit the line:
"head": {
        "plus_x": [
            1,
            0,
            0
        ],
        "plus_z": [
            0,
            0,
            -1
        ],
        "position": [
            4.5600000930789975e-07,
            0.039768997579813004,
            0.051509737968444824  <--- You want to change this number, you need to add -0.13 to this number.
        ]
},
  1. Add -0.13 to the indicated number, for example my new number is: -0.078490262031555176 (Yours might be different so do the math homework yourself.) New line will look something like this:
"head": {
        "plus_x": [
            1,
            0,
            0
        ],
        "plus_z": [
            0,
            0,
            -1
        ],
        "position": [
            4.5600000930789975e-07,
            0.039768997579813004,
            -0.078490262031555176  
        ]
},
  1. Save the file.
  2. Now execute this command in lighthouse_console.exe: uploadconfig LHR-YOURSERIAL.json
  3. That's it, close the lighthouse console, plug in all your VR stuff and go test it in SteamVR!
  4. Make sure to keep the backup json file somewhere safe, if you ever want to go back to using your tracker for something else you'll need to upload the original config file to it :)

KNOWN ISSUES:

  • -0.13 Is number that works for me and my custom slim face gasket, this number is very much just an example. You should experiment with this number and find one that works the best for you.
  • If you're using Full Body Tracking in VRChat than VRChat will recognize your head tracker as one of your legs (VRChat completely ignores the SteamVR tracker roles...), Workaround is to close SteamVR if running, turn off your head tracker, turn on all 3 of your body trackers, open VRChat, calibrate your avatar and lastly turn on your head tracker. In order to do this you'll need Space Calibrator as well to be running but once you turn on your head tracker SpaceCal will be overwritten by the tracker ;)

CREDITS:

Danwillm : Help with OpenVR :)