Skip to content

Latest commit

 

History

History
79 lines (60 loc) · 3.15 KB

sonoff_S20.markdown

File metadata and controls

79 lines (60 loc) · 3.15 KB
title category type standard link image template link_alt
Sonoff S20
plug
Plug
eu
us
uk
anzac
{"NAME":"Sonoff S20","GPIO":[17,255,255,255,0,0,0,0,21,56,0,0,0],"FLAG":0,"BASE":8}

Sonoff S20 comes in 4 plug type variants. Flashing process will be the same for each type.

Serial Connection

Please see the Hardware Preparation page for general instructions.

S20 Smart Socket

The picture shows how to program the S20 Smart Socket powered by the serial-to-USB converter. With newer US sockets, either use a right-angle header, or remove the header after flashing. Otherwise,the pushbutton may rub against a pin and get stuck.

Be sure it is NOT plugged in mains!

Remove the "hidden" screw.

SonoffS20

(optional) Remove the board from the plastic shell to have better access to serial pins. There are 2 screws at the red and blue wire. Be careful not to damage the soldered connection!

SonoffS20

Connect the jumper wires.

SonoffS20

From top to bottom (see image below):

  • Vcc (3,3V)
  • TXD
  • RXD
  • GND

S20 Board

Connected? Hold the little button pressed while connecting the serial-to-USB adapter to your computer. After about 2 seconds let go of the button. It is now in flashing mode and ready to be flashed with Tasmota.

Video tutorial by Don't It Yourself

<iframe width="560" height="315" src="https://www.youtube.com/embed/5k_35ppDPho" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Official Sources

OpenHab Configuration

sonoff.items:

Switch S20_1 "Coffee S20-1 Powerplug" (LR,gLight) 
       { mqtt=">[broker:cmnd/sonoff-S20-1/POWER:command:*:default],
                 <[broker:stat/sonoff-S20-1/POWER:state:default],
                 <[broker:stat/sonoff-S20-1/RESULT:state:JSONPATH($.POWER)],
                 <[broker:tele/sonoff-S20-1/STATE:state:JSONPATH($.POWER)]
                 "}
Switch S20_1_Reachable "S20-1 reachable" <contact> (gReachable)
       { mqtt="<[broker:tele/sonoff-S20-1/LWT:state:MAP(reachable.map)],
               <[broker:stat/sonoff-S20-1/RESULT:state:ON],
               <[broker:stat/sonoff-S20-1/POWER:state:ON],
               <[broker:tele/sonoff-S20-1/STATE:state:ON]
               " }

default.sitemap:

        Switch item=S20_1 labelcolor=[S20_1_Reachable == "ON" = "green",S20_1_Reachable == "OFF" = "red"]