MAC adress missconfig

[yuriysergeev]

Hi, man! so sorry to bother you but I faced with some misconfiguration. So, I wanna say thx so much for your utility - it is really help a lot off. I have a case - wanna to remove MEO Portugal router from my home) Just pretty straightforward apply tool with Altice vendor and serial number + MAC Everything done smoothly, no problem When I tried to login to UF-Loco FW v4.3.1 I was ok in UI and terminal. I push ifconfig and receive result: > ifconfig bcmsw Link encap:Ethernet HWaddr 1C:57:3E:22:2A:7F UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7404 multicast:0 unicast:7404 broadcast:0 RX errors:0 dropped:0 overruns:0 frame:0 TX packets:3863 multicast:0 unicast:3863 broadcast:0 TX errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1114137 (1.0 MiB) TX bytes:2516023 (2.3 MiB) RX multicast bytes:0 (0.0 B) TX multicast bytes:0 (0.0 B) Base address:0xffff

br0 Link encap:Ethernet HWaddr 1C:57:3E:22:2A:7F
inet addr:192.168.3.254 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::1e57:3eff:fe22:2a7f/64 Scope:Link
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1958 Metric:1
RX packets:7310 multicast:128 unicast:7153 broadcast:29
RX errors:0 dropped:0 overruns:0 frame:0
TX packets:3854 multicast:0 unicast:3854 broadcast:0
TX errors:0 dropped:0 overruns:0 carrier:0 collisions:0
txqueuelen:0
RX bytes:991617 (968.3 KiB) TX bytes:2499609 (2.3 MiB)
RX multicast bytes:44828 (43.7 KiB) TX multicast bytes:0 (0.0 B)

br4354 Link encap:Ethernet HWaddr 16:37:C7:C8:BA:C2
inet6 addr: fe80::1437:c7ff:fec8:bac2/64 Scope:Link
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:1326 (1.2 KiB)

br4355 Link encap:Ethernet HWaddr 32:64:17:D7:4E:35
inet6 addr: fe80::3064:17ff:fed7:4e35/64 Scope:Link
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:1866 (1.8 KiB)

eth0 Link encap:Ethernet HWaddr 1C:57:3E:22:2A:7F
inet6 addr: fe80::1e57:3eff:fe22:2a7f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1958 Metric:1
RX packets:6983 multicast:161 unicast:6822 broadcast:0
RX errors:0 dropped:0 overruns:0 frame:0
TX packets:3763 multicast:83 unicast:3680 broadcast:0
TX errors:0 dropped:0 overruns:0 carrier:0 collisions:0
txqueuelen:1000
RX bytes:1047487 (1022.9 KiB) TX bytes:2486585 (2.3 MiB)
RX multicast bytes:0 (0.0 B) TX multicast bytes:0 (0.0 B)

eth0.0 Link encap:Ethernet HWaddr 1C:57:3E:22:2A:7F
inet6 addr: fe80::1e57:3eff:fe22:2a7f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1958 Metric:1
RX packets:7338 multicast:145 unicast:7162 broadcast:31
RX errors:0 dropped:0 overruns:0 frame:0
TX packets:3860 multicast:0 unicast:3860 broadcast:0
TX errors:0 dropped:0 overruns:0 carrier:0 collisions:0
txqueuelen:0
RX bytes:997174 (973.8 KiB) TX bytes:2499553 (2.3 MiB)
RX multicast bytes:49215 (48.0 KiB) TX multicast bytes:0 (0.0 B)

gpondef Link encap:Ethernet HWaddr 1C:57:3E:21:2A:7F
inet6 addr: fe80::1e57:3eff:fe21:2a7f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:3 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

but when I push: wan add service ipoe_veip0 --protocol ipoe

/bin/consoled_launcher:error:617.685:cmsNet_getMacAddrByIfname:316:SIOCGIFHWADDR returns error.
/bin/consoled_launcher:error:617.687:stl_wanIpConnObject:536:Could not get mac address for veip0.1, ret=9002
/bin/consoled_launcher:error:617.756:cmsNet_getMacAddrByIfname:316:SIOCGIFHWADDR returns error.
/bin/consoled_launcher:error:617.761:stl_wanIpConnObject:536:Could not get mac address for veip0.1, ret=9002
[rutGpon_getGponSnChange]snPrefix=PTIN
/bin/consoled_launcher:error:617.766:rutGpon_getGponSnChange:5733:SN state is abnormal
/bin/consoled_launcher:error:617.766:cli_isValidL2IfName:488:wanL2IfName ipoe_veip0 - wrong format
/bin/consoled_launcher:error:617.767:cmdWanAddService:636:ipoe_veip0 is not valid (already in use).

So, looks like something happened with MAC Address.
May I ask you to clarify this cause when I applied everything went fine:

./UFiber.Configurator --host 192.168.3.254 --user ubnt --pw ubnt --serial 50-54-49-4E-3E-21-2A-7F --mac 1C573E212A7F

Original Image

--- NVRAM Information --

• mtdblock3 hash: a9490ca086a1e2052960d8e8bda17051ba2a2f3074a79eb8e17c73001e2e2b7c
• NVRAM Version: 6
• Boot parameters: e=192.168.1.1:ffffff00 h=192.168.1.254 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0 c= a=
• Board Id: UBNT_SFU_6848
• PSI size: 24
• Total MAC addresses: 5
• GPON MAC address: 1C:57:3E:21:2A:7F
• GPON Vendor Id: PTIN
• GPON Serial Number: 3E212A7F
• GPON SLID (password): GJ3pKdjq
• Checksum: 2536286192

Patching fw-02042024-092436.bin...

Patched fw-02042024-092436.bin!

--- NVRAM Information --

• mtdblock3 hash: 9dce6e2ede6112bbbd68b786733a9278b1fc837d8ebdcd4d96b58f570b2c2164
• NVRAM Version: 6
• Boot parameters: e=192.168.1.1:ffffff00 h=192.168.1.254 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0 c= a=
• Board Id: UBNT_SFU_6848
• PSI size: 24
• Total MAC addresses: 5
• GPON MAC address: 1C:57:3E:21:2A:7F
• GPON Vendor Id: PTIN
• GPON Serial Number: 3E212A7F
• GPON SLID (password): GJ3pKdjq
• Checksum: 2536286192

Uploading patched file to the target UFiber device...
Uploaded!

Applying patched file on the target UFiber device...

Applied patch! Please reboot your UFiber device to load the new image.

[fabioneves]

Hello,
I want to do the same thing as you, did you manage to do it? :)