How to see Sky130hd LEF already in plateform to avoid Missing LEFs

[Wiki1998-dev]

How can I see what are LEFs in the plateform of sky130 hd in openroad library
as everytime i run the design i get to see there is one missing LEF
i want to see all the LEF which are already insie and based on it i will compare the names from sythesis report either all are there or not ?
uptill now
i had to add
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__buf_lp.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__buflp_1.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_0.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_1.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_2.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_4.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_8.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_16.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkbuf_lp.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__clkdlybuf4s18_1.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_fd_sc_lp__lsbuf_lp.lef
/home/wiki/orxh/x-heep/flow/OpenROAD-flow-scripts/flow/lef/sky130_sram_4kbyte_1rw_32x1024_8.lef

[maliberty]

Why aren't you using the LEF from https://github.com/The-OpenROAD-Project/OpenROAD-flow-scripts/tree/master/flow/platforms/sky130hd/lef ?

[Wiki1998-dev]

export DESIGN_NICKNAME = core_v_mini_mcu
export DESIGN_NAME = core_v_mini_mcu
export PLATFORM = sky130hd

export VERILOG_FILES = ./designs/src/$(DESIGN_NICKNAME)/*.sv

export ADDITIONAL_LIBS = $(wildcard ./lib/.lib)
export ADDITIONAL_GDSS = $(wildcard ./gds/.gds)
export ADDITIONAL_LEFS = $(wildcard ./lef/*.lef) ./platforms/sky130hd/lef/sky130_fd_sc_lp__lsbuf_lp.lef
export SDC_FILE = ./designs/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint.sdc

export ABC_AREA = 1

export SYNTH_HIERARCHICAL = 1
export MAX_UNGROUP_SIZE = 100

export CORE_UTILIZATION = 20
export CORE_ASPECT_RATIO = 1
export CORE_MARGIN = 2

export PLACE_DENSITY_LB_ADDON = 0.2
export PLACE_DENSITY = 0.2

export RTLMP_FLOW = True

export MACRO_PLACE_HALO = 70 70
export MACRO_PLACE_CHANNEL = 140 140

export FASTROUTE_TCL = $(PLATFORM_DIR)/fastroute.tcl

[Wiki1998-dev]

This is config,mk
when i used "plateform:sky130hd" ,Doesnt it itself get these?
i check in my orfs the same file are present but everytime in placement step one more lef is missing stage

[maliberty]

something is wrong here but its hard to tell from just this. Can you make an issue sharing your setup?

[Wiki1998-dev]

Sure
https://drive.google.com/drive/folders/1Xh2Xdn4mJMHYTmsGoT-mEJkIJxp52Np3?usp=sharing
I am sorry for delay it took some time to upload

[Wiki1998-dev]

After adding all the additional LEFs
in the step of 3.5 detailed placement i am getting this error i have shared link which includes this log also in directory
This program is licensed under the BSD-3 license. See the LICENSE file for details.
Components of this program may be licensed under more restrictive licenses which must be honored.
[WARNING STA-1173] ./lib/sky130_fd_sc_lp__ss_150C_1v65.lib line 17, default_fanout_load is 0.0.
[ERROR DPL-4219] Cell peripheral_subsystem_i/gpio_i/i_reg_file/2301 has no site.
Error: detail_place.tcl, 10 DPL-4219
Command exited with non-zero status 1
Elapsed time: 0:21.73[h:]min:sec. CPU time: user 17.53 sys 2.44 (91%). Peak memory: 5906224KB.
make: *** [Makefile:544: results/sky130hd/core_v_mini_mcu/base/3_5_place_dp.odb] Error 1
I tried to increase area limitations by modifying to
export CORE_UTILIZATION = 5 # Very low utilization for maximum area
export PLACE_DENSITY = 0.05 # Very low placement density
export CORE_MARGIN = 10 # Large margin around the core
but still ..
can you please guide me why ad what is this issue about ?
Thanks