Bed Type stuck on Smooth High Temp Plate. Started in version 2.2.0

[steadmanc]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.3.0 and 2.2.0

Operating System (OS)

Windows

OS Version

11

Additional system information

No response

Printer

Flashforge Adventurer 5M Pro

How to reproduce

NA since it in the left pane on startup.

Actual results

Expected results

Should be able to change the Bed Type via drop down but it's locked.

Project file & Debug log uploads

Version 2.2.0 is when it started. Confirmed it is still in 2.3.0 nightly build.

Checklist of files to include

• Log file
• Project file

Anything else?

No response

[discip]

@steadmanc
Please provide any project file.

[steadmanc]

It's on the left pane when the software starts. Whether you have a project in or not, the issue is there. Get Outlook for Android<https://aka.ms/AAb9ysg>

…

________________________________ From: discip ***@***.***> Sent: Thursday, February 6, 2025 3:41:53 AM To: SoftFever/OrcaSlicer ***@***.***> Cc: steadmanc ***@***.***>; Mention ***@***.***> Subject: Re: [SoftFever/OrcaSlicer] Bed Type stuck on Smooth High Temp Plate. Started in version 2.2.0 (Issue #8328) @steadmanc<https://github.com/steadmanc> Please provide any project file. — Reply to this email directly, view it on GitHub<#8328 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AS7GFLFTQ3VQ2XRAQNOGD4L2OMU6DAVCNFSM6AAAAABWS5IGVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMZZGMYDIMBRGA>. You are receiving this because you were mentioned.Message ID: ***@***.***>

[discip]

Thing is: If you share a project file all your settings are comprehensible.

It's not about the part, rather than about your settings. 😊

Just put a generic cube on the plate.

[igiannakas]

Enable multi plate support in the printer settings.

[steadmanc]

Bingo! Apparently, those were enabled when I installed the software but had since been turned off when installing the updates. Exactly the help I needed. Thank you. Pics with the check boxes I had to check to get those features turned back on. Thank you. From: Ioannis Giannakas ***@***.***> Sent: Thursday, February 6, 2025 10:02 AM To: SoftFever/OrcaSlicer ***@***.***> Cc: steadmanc ***@***.***>; Mention ***@***.***> Subject: Re: [SoftFever/OrcaSlicer] Bed Type stuck on Smooth High Temp Plate. Started in version 2.2.0 (Issue #8328) Enable multi plate support in the printer settings. image.jpeg (view on web) <https://github.com/user-attachments/assets/6a2f2d06-bec5-4cb2-8f3c-5ed228f46c79> — Reply to this email directly, view it on GitHub <#8328 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AS7GFLDU2WPF6OLFJCHGUVL2OOBRFAVCNFSM6AAAAABWS5IGVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNBQGI2DGNRZGA> . You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AS7GFLF6E7COIJMRZGTGZUT2OOBRFA5CNFSM6AAAAABWS5IGVOWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTU5L3V6U.gif> Message ID: ***@***.*** ***@***.***> >

[steadmanc]

Ah gotcha. Thanks. I did close both bugs I opened since the last responses gave me a clue where to look. Figured if the plate was in the config, the filament add/remove was there somewhere too. I was correct. Get Outlook for Android<https://aka.ms/AAb9ysg>

…

________________________________ From: Ioannis Giannakas ***@***.***> Sent: Thursday, February 6, 2025 10:02:26 AM To: SoftFever/OrcaSlicer ***@***.***> Cc: steadmanc ***@***.***>; Mention ***@***.***> Subject: Re: [SoftFever/OrcaSlicer] Bed Type stuck on Smooth High Temp Plate. Started in version 2.2.0 (Issue #8328) Enable multi plate support in the printer settings. image.jpeg (view on web)<https://github.com/user-attachments/assets/6a2f2d06-bec5-4cb2-8f3c-5ed228f46c79> — Reply to this email directly, view it on GitHub<#8328 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AS7GFLDU2WPF6OLFJCHGUVL2OOBRFAVCNFSM6AAAAABWS5IGVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNBQGI2DGNRZGA>. You are receiving this because you were mentioned.Message ID: ***@***.***>