From f5ec607b6afd00d80834e90badf13e1fe0e917e3 Mon Sep 17 00:00:00 2001 From: SoftFever Date: Fri, 17 Nov 2023 20:00:12 +0800 Subject: [PATCH] update WIKI --- doc/Chamber-temperature.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/doc/Chamber-temperature.md b/doc/Chamber-temperature.md index 2ab9c1b7cf3..ea268532bff 100644 --- a/doc/Chamber-temperature.md +++ b/doc/Chamber-temperature.md @@ -21,7 +21,7 @@ Bellow is a reference configuration for Klipper. [heater_generic chamber_heater] heater_pin:PB10 max_power:1.0 -# Note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor +# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor sensor_type:NTC 100K MGB18-104F39050L32 sensor_pin:PA1 control = pid @@ -43,6 +43,8 @@ gcode: M117 Chamber heating cancelled {% else %} SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s} + # Orca: uncomment the following line if you want to use heat bed to assist chamber heating + # M140 S100 TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1} M117 Chamber at target temperature {% endif %}